Preparation of Geopolymers with Nanosilica and Water-in-Air Pickering Emulsion: Mechanisms Underlying Its Rheology, Polymerization, and Strength

Geopolymers are alkaline-activated aluminosilicate binders recognized as a promising alternative to traditional Portland cement due to their significantly lower greenhouse emissions, energy consumption, and carbon footprint. However, the challenge is meeting or exceeding the strength of Portland cement concrete while being prepared within a desired setting time and possessing workable rheology. A "water-in-air" Pickering emulsion, also called dry water, was prepared by stabilizing water droplets with hydrophobic nano silica and using them to control the geopolymer's strength, setting time, and workability. The mechanisms that underlie the effects of dry water on the rheology, setting, and strength were studied in detail through a combination of rheological, thermal, morphological, chemical, and microstructural assessments. A reduction in the viscosity and yield shear stress manifests in a higher flow diameter, principally due to the particle size coarsening in the precursor and the flowability of hydrophobic nano silica. There was a rapid rise in temperature during the setting process as the dry water temporarily increased the local alkalinity in the mixture, which boosted the dissolution of the precursor and, hence, the reaction. Outcomes from X-ray diffraction, thermogravimetric analysis, and Fourier-transform infrared confirm the highest degree of polycondensation for the principal N-A-S-H framework in mixtures containing dry water. These eventually correspond to a denser microstructure under scanning electron microscopy and, in turn, a superior mechanical strength. Depending on the unique combination of characteristics, including size coarsening, temporary water encapsulation, microfilling effect, and supplementary silica source, dry water resolves the "trade-off" between geopolymer's fresh and hardened properties when introducing nanoparticles.

The Effect of Crosslinking Density on Nasal Chondrocytes' Redifferentiation

Hydrogels appear to be an attractive class of biomaterial for cartilage tissue engineering due to their high water content, excellent biocompatibility, tunable stiffness, etc. The crosslinking density of the hydrogel can affect their viscoelastic property, and therefore potentially impact the chondrogenic phenotype of re-differentiated chondrocytes in a 3D microenvironment through physical cues. To understand the effect of crosslinking densities on chondrocytes phenotype and cellular interaction with the hydrogel, this study utilized a clinical grade thiolate hyaluronic acid and thiolate gelatin (HA-Gel) hydrogel, crosslinked with poly(ethylene glycol) diacrylate to create various crosslinking densities. The HA-Gel hydrogels were then mixed with human nasal chondrocytes to generate neocartilage in vitro. The influence of the hydrogel crosslinking density and the viscoelastic property on the cell behaviours on the gene and matrix levels were evaluated using biochemistry assays, histology, quantitative polymerase chain reaction (qPCR) and next-generation sequencing (RNA seq). In general, the differences in the storage modulus of the HA-Gel hydrogel are not enough to alter the cartilaginous gene expression of chondrocytes. However, a positively correlated trend of PPAR-γ gene expression to the crosslinking density was measured by qPCR. The RNA-seq results have shown that 178 genes are significantly negatively correlated and 225 genes are positively correlated to the crosslinking density, which is worth investigating in the future studies.

3D Bioprinting of Hyaline Cartilage Using Nasal Chondrocytes

Due to the limited self-repair capacity of the hyaline cartilage, the repair of cartilage remains an unsolved clinical problem. Tissue engineering strategy with 3D bioprinting technique has emerged a new insight by providing patient's personalized cartilage grafts using autologous cells for hyaline cartilage repair and regeneration. In this review, we first summarized the intrinsic property of hyaline cartilage in both maxillofacial and orthopedic regions to establish the requirement for 3D bioprinting cartilage tissue. We then reviewed the literature and provided opinion pieces on the selection of bioprinters, bioink materials, and cell sources. This review aims to identify the current challenges for hyaline cartilage bioprinting and the directions for future clinical development in bioprinted hyaline cartilage.

Rheological and viscoelastic properties of collagens and their role on bioprinting by micro-extrusion

This article aims to understand the rheology of collagen networks and their role in various stages of a bioprinting process while building tissue-like constructs. The science of rheology, which deals with the deformation and flow of matter, has grown considerably from its earlier focus on polymer melts and solutions and their processing methods to hydrogels with new processing procedures, such as bioprinting. The main objective of this paper is to discuss the impact of the rheology of collagen hydrogels on micro-extrusio and layer stacking stages of bioprinting. Generally, the rheological characterization of hydrogels, including collagens by dynamic measurements under small deformations, is considered sufficient to evaluate their bioprinting performance. However, we brought out the importance of other rheological properties of collagen networks such as steady-state shear flow conditions and large amplitude oscillator shear. While the dynamic measurements under small deformations are useful for characterizing the crosslinking and gel formations of the collagen, the steady shear flow measurements are better tools for investigating filament micro-extrusion and layer-stacking stages of a bioprinting process. We brought the role of other non-Newtonian material functions, such as first normal stress difference and extensional viscosity in addition to shear viscosity, for the first time. Extensional viscosity and the viscoelasticity manifested through normal-stress differences are significant in capillary (needle) flow. We also suggested caution to use of dynamic viscosity vs. oscillation frequency under small deformations in the place of steady shear viscosity vs. shear rate measurement. In addition, we brought out the importance of the large amplitude oscillatory shear test to investigate the collagen networks under large deformations. Finally, we discussed the role of crosslinking and flow conditions on cell viability. Those discussions are focused on collagen networks; nevertheless, they are valid on the bioprinting of other hydrogels.

Recent advances and future perspective on nanocellulose-based materials in diverse water treatment applications

Over the past few years, nanocellulose and its derivatives have drawn attention as promising bio-based materials for water treatment applications due to their high surface area, high strength, and renewable, biocompatible nature. The abundance of hydroxyl functional groups on the surfaces of cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) enables a broad range of surface modifications which results in propitious nanocomposites with tunable characteristics. In this context, this review describes the continuously developing applications of nanocellulose-based materials in the areas of adsorption, catalysis, filtration, and flocculation, with a special emphasis on the removal of contaminants such as heavy metals, dyes, and pharmaceutical compounds from diverse water systems. Recent progresses in the diverse forms of application of nanocellulose adsorbents (suspension, hydrogel, aerogel, and membrane) are also highlighted. Finally, challenges and future perspectives on emerging nanocellulose-based materials and their possible industrial applications are presented and discussed.

Experimental Characterization and Multi-Factor Modelling to Achieve Desired Flow, Set and Strength of N-A-S-H Geopolymers

The interaction between compositional ratios, namely, SiO₂/Al₂O₃, Na₂O/Al₂O₃, H₂O/Na₂O and the liquid-to-solid ratio, triggers mutual sacrifice between workability, setting time and strength for N-A-S-H geopolymers. The present study characterizes the mechanism underlying the effect of these compositional ratios and, in turn, develops guidelines for mixture design that requires a simultaneous and satisfactory delivery of these engineering properties. The experimental results show that an increase in either the SiO₂/Al₂O₃, Na₂O/Al₂O₃ or H₂O/Na₂O ratio raises the liquid-to-solid ratio, which in turn improves the workability of fresh mixtures. A continuous increase beyond 2.8 for the SiO₂/Al₂O₃ ratio boosts its strength, but also significantly extends its final set. Lowering the Na₂O/Al₂O₃ ratio from 1.3 to 0.75 raises the compressive strength significantly, while the shortest final set was seen at the median value, 1.0. A H₂O/Na₂O ratio of 9~10 yields the highest strength and the fastest final set simultaneously, due to the maximized degree of geopolymerization. Moreover, the accompanying sensitivity analysis indicates that the workability depends chiefly upon the H₂O/Na₂O ratio, the final setting time on the SiO₂/Al₂O₃ ratio and, that the compressive strength relies on both of them. Also, this study proposes an optimal range of 2.8~3.6 for SiO₂/Al₂O₃, 0.75~1.0 for Na₂O/Al₂O₃ and 9~10 for H₂O/Na₂O to guarantee high strength, together with high flow and within the allowable final setting time. Furthermore, multi-factor predictive models are established with acceptable accuracy for practitioners to regulate oxide compositions in N-A-S-H geopolymers, which will guide future mixture design.

In vitro maturation and in vivo stability of bioprinted human nasal cartilage

The removal of skin cancer lesions on the nose often results in the loss of nasal cartilage. The cartilage loss is either surgically replaced with autologous cartilage or synthetic grafts. However, these replacement options come with donor-site morbidity and resorption issues. 3-dimensional (3D) bioprinting technology offers the opportunity to engineer anatomical-shaped autologous nasal cartilage grafts. The 3D bioprinted cartilage grafts need to embody a mechanically competent extracellular matrix (ECM) to allow for surgical suturing and resistance to contraction during scar tissue formation. We investigated the effect of culture period on ECM formation and mechanical properties of 3D bioprinted constructs of human nasal chondrocytes (hNC)-laden type I collagen hydrogel in vitro and in vivo. Tissue-engineered nasal cartilage constructs developed from hNC culture in clinically approved collagen type I and type III semi-permeable membrane scaffold served as control. The resulting 3D bioprinted engineered nasal cartilage constructs were comparable or better than the controls both in vitro and in vivo. This study demonstrates that 3D bioprinted constructs of engineered nasal cartilage are feasible options in nasal cartilage reconstructive surgeries.

TEMPO-Oxidized Cellulose Nanofiber-Alginate Hydrogel as a Bioink for Human Meniscus Tissue Engineering

Objective: The avascular inner regions of the knee menisci cannot self-heal. As a prospective treatment, functional replacements can be generated by cell-based 3D bioprinting with an appropriate cell source and biomaterial. To that end, human meniscus fibrochondrocytes (hMFC) from surgical castoffs of partial meniscectomies as well as cellulose nanofiber-alginate based hydrogels have emerged as a promising cell source and biomaterial combination. The objectives of the study were to first find the optimal formulations of TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl)-oxidized cellulose nanofiber/alginate (TCNF/ALG) precursors for bioprinting, and then to use them to investigate redifferentiation and synthesis of functional inner meniscus-like extracellular matrix (ECM) components by expanded hMFCs. Methods: The rheological properties including shear viscosity, thixotropic behavior recovery, and loss tangent of selected TCNF/ALG precursors were measured to find the optimum formulations for 3D bioprinting. hMFCs were mixed with TCNF/ALG precursors with suitable formulations and 3D bioprinted into cylindrical disc constructs and crosslinked with CaCl2 after printing. The bioprinted constructs then underwent 6 weeks of in vitro chondrogenesis in hypoxia prior to analysis with biomechanical, biochemical, molecular, and histological assays. hMFCs mixed with a collagen I gel were used as a control. Results: The TCNF/ALG and collagen-based constructs had similar compression moduli. The expression of COL2A1 was significantly higher in TCNF/ALG. The TCNF/ALG constructs showed more of an inner meniscus-like phenotype while the collagen I-based construct was consistent with a more outer meniscus-like phenotype. The expression of COL10A1 and MMP13 were lower in the TCNF/ALG constructs. In addition, the immunofluorescence of human type I and II collagens were evident in the TCNF/ALG, while the bovine type I collagen constructs lacked type II collagen deposition but did contain newly synthesized human type I collagen.

Bioprinting of human nasoseptal chondrocytes-laden collagen hydrogel for cartilage tissue engineering

Skin cancer patients often have tumorigenic lesions on their noses. Surgical resection of the lesions often results in nasal cartilage removal. Cartilage grafts taken from other anatomical sites are used for the surgical reconstruction of the nasal cartilage, but donor-site morbidity is a common problem. Autologous tissue-engineered nasal cartilage grafts can mitigate the problem, but commercially available scaffolds define the shape and sizes of the engineered grafts during tissue fabrication. Moreover, the engineered grafts suffer from the inhomogeneous distribution of the functional matrix of cartilage. Advances in 3D bioprinting technology offer the opportunity to engineer cartilages with customizable dimensions and anatomically shaped configurations without the inhomogeneous distribution of cartilage matrix. Here, we report the fidelity of Freeform Reversible Embedding of Suspended Hydrogel (FRESH) bioprinting as a strategy to generate customizable and homogenously distributed functional cartilage matrix engineered nasal cartilage. Using FRESH and in vitro chondrogenesis, we have fabricated tissue-engineered nasal cartilage from combining bovine type I collagen hydrogel and human nasoseptal chondrocytes. The engineered nasal cartilage constructs displayed molecular, biochemical and histological characteristics akin to native human nasal cartilage.

Delivery of Bioactive Gene Particles via Gelatin-Collagen-PEG-Based Electrospun Matrices

The fabrication of fiber mats via electrospinning has been adopted in the last decades to produce high quality scaffolds for tissue engineering. However, an effective combination of electrospinning methods with gene delivery therapies remains a challenge. In this study, we describe how the delivery of gene complexes via electrospun mats that contain different volumes of gelatin (Gel), collagen (Col), and polyethylene glycol (PEG) can affect gene expression by transfected cells. Non-viral complexes were formulated by using lipid modified polyethylenimine (PEI) polymer and plasmid DNAs (pDNA) like the reporter Green Fluorescent Protein (GFP) and the therapeutically relevant Bone Morphogenetic Protein-2 (BMP-2) and electrospuned after being mixed with different volumes of Gel-Col-PEG mats and delivered to human myoblast (C2C12) and mouse osteoblast cells (MC3T3). The entrapment of GFP complexes via different homogeneous electrospun fiber mats revealed that a high fraction of collagen in the mats affected the quality of the fibers and led to reduced transfection efficiency on target cells. On the other hand, the fabrication of double-layered mats that contained collagen without complexes as a first layer and gelatin-collagen-PEG with complexes as a second layer successfully induced GFP expression and ALP activity in C2C12 cells. We conclude that this study has established the advantage of formulating multilayered bioactive collagen-based mats for gene delivery applications.

Exploring the gelation of aqueous cellulose nanocrystals (CNCs)-hydroxyethyl cellulose (HEC) mixtures

We investigated the gelation and microstructure of cellulose nanocrystals (CNCs) in nonionic hydroxyethyl cellulose (HEC) solutions. Cellulose nanocrystals (CNCs) with a particle length of 90 nm and width of 8 nm currently produced by acid hydrolysis of wood pulp were used in this study. The microstructures of CNCs/polymer suspensions were investigated by performing linear small amplitude oscillatory shear (SAOS) and nonlinear large amplitude oscillatory shear (LAOS), in addition to constructing CNCs phase diagrams and measuring steady-state shear viscosities. Significant viscosity increases at low shear rates coupled with high shear thinning behaviors were observed in CNCs in HEC solutions above the overlapping concentration of HEC. The physical strength of CNCs/HEC solution gels increased with the increase in CNCs concentration and resembled the weakly crosslinked gels according to the scaling of linear dynamic mechanical experiments. According to LAOS analysis, CNCs/HEC mixtures showed type III behavior with intercycle stress softening, while the samples showed stress stiffening in single cycles.

Polymer Induced Gelation of Aqueous Suspensions of Cellulose Nanocrystals

We investigated the gelation of cellulose nanocrystals (CNCs) in polyelectrolyte and neutral polymer solutions. Cellulose nanocrystals (CNCs) with half-ester sulfate groups produced by acid hydrolysis of wood pulp were used in this study. The microstructure of CNCs/polymer suspensions was investigated in semidilute concentration regimes by selecting carboxymethyl cellulose (CMC700) as an anionic polymer and poly(ethylene oxide) (PEO600) as a neutral polymer solution. Together with quartz crystal microbalance with dissipation monitoring (QCM-D), rheology, scanning electron microscopy (SEM), and cryo-transmission electron microscopy (cryo-TEM), we characterized CNCs-polymer interactions, the suspension microstructure, and the macroscopic gel flow. Significant viscosity increases at low shear rates coupled with high shear-thinning behaviors were observed in CNC colloid-CMC700 polymer mixtures, but not those CNCs in PEO600 solutions. The apparent differences between CNCs-CMC700 and CNCs-PEO600 mixtures were due to their chain confirmations. On the basis of the evaluations from STEM, cryo-TEM, and polarized optical microscopy, we proposed that the excess CMC700 molecules in solutions result in the depletion of CNCs and the formation of anisotropic domains.

Plant celluloses, hemicelluloses, lignins, and volatile oils for the synthesis of nanoparticles and nanostructured materials

A huge variety of plants are harvested worldwide and their different constituents can be converted into a broad range of bionanomaterials. In parallel, much research effort in materials science and engineering is focused on the formation of nanoparticles and nanostructured materials originating from agricultural residues. Cellulose (40-50%), hemicellulose (20-40%), and lignin (20-30%) represent major plant ingredients and many techniques have been described that separate the main plant components for the synthesis of nanocelluloses, nano-hemicelluloses, and nanolignins with divergent and controllable properties. The minor components, such as essential oils, could also be used to produce non-toxic metal and metal oxide nanoparticles with high bioavailability, biocompatibility, and/or bioactivity. This review describes the chemical structure, the physical and chemical properties of plant cell constituents, different techniques for the synthesis of nanocelluloses, nanohemicelluloses, and nanolignins from various lignocellulose sources and agricultural residues, and the extraction of volatile oils from plants as well as their use in metal and metal oxide nanoparticle production and emulsion preparation. Furthermore, details about the formation of activated carbon nanomaterials by thermal treatment of lignocellulose materials, a few examples of mineral extraction from agriculture waste for nanoparticle fabrication, and the emerging applications of plant-based nanomaterials in different fields, such as biotechnology and medicine, environment protection, environmental remediation, or energy production and storage, are also included. This review also briefly discusses the recent developments and challenges of obtaining nanomaterials from plant residues, and the issues surrounding toxicity and regulation.

The Effects of High Pressure and High Temperature in Semidilute Aqueous Cellulose Nanocrystal Suspensions

A semidilute cellulose nanocrystal suspension was tested for pressure, volume, temperature dependencies of its viscosity and density. The compression of a 2.0 wt % cellulose nanocrystal suspension under 5.0 MPa at room temperature resulted in morphological changes from istotropic to nematic form. However, at high temperature, high-pressure treatment caused desulfation and gelation. Those results have significant applications, not only as additives in drilling and fracturing fluids but also for the preparation of hydrogels.

Facile Synthesis of Calcium Hydroxide Nanoparticles onto TEMPO-Oxidized Cellulose Nanofibers for Heritage Conservation

Calcium hydroxide is used in diverse applications including heritage conservation where supplying it in the form of nanoparticles allows easy carbonation with atmospheric air contacts. The effects of cellulose nanofibers on the precipitation of calcium hydroxide nanoparticles were investigated by varying the reaction time, concentration, and carboxylation content of cellulose nanofibers. Cellulose nanofibers were very effective in producing calcium hydroxide nanoparticles with less than 50 nm sizes out of calcium nitrate-sodium hydroxide precipitation reactions. The formation of smaller-size calcium hydroxide nanoparticles is believed to be the result of heterogeneous nucleation and growth of calcium hydroxide particles on cellulose nanofibers. The liquid-phase nucleated and grown calcium hydroxide nanoparticles were also deposited onto cellulose nanofibers. The resulting calcium hydroxide nanoparticles were carbonized and generated calcite under atmospheric carbon dioxide in an efficient way.

Effect of surface organic coatings of cellulose nanocrystals on the viability of mammalian cell lines

Cellulose nanocrystals (CNCs) have emerged as promising candidates for a number of bio-applications. Surface modification of CNCs continues to gain significant research interest as it imparts new properties to the surface of the nanocrystals for the design of multifunctional CNCs-based materials. A small chemical surface modification can potentially lead to drastic behavioral changes of cell-material interactions thereby affecting the intended bio-application. In this work, unmodified CNCs were covalently decorated with four different organic moieties such as a diaminobutane fragment, a cyclic oligosaccharide (β-cyclodextrin), a thermoresponsive polymer (poly[N-isopropylacrylamide]), and a cationic aminomethacrylamide-based polymer using different synthetic covalent methods. The effect of surface coatings of CNCs and the respective dose-response of the above organic moieties on the cell viability were evaluated on mammalian cell cultures (J774A.1 and MFC-7), using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphe-nyltetrazolium bromide and lactate dehydrogenase assays. Overall, the results indicated that cells exposed to surface-coated CNCs for 24 h did not display major changes in cell viability, membrane permeability as well as cell morphology. However, with longer exposure, all these parameters were somewhat affected, which appears not to be correlated with either anionic or cationic surface coatings of CNCs used in this study.

Cellulose nanocrystal cationic derivative induces NLRP3 inflammasome-dependent IL-1β secretion associated with mitochondrial ROS production

Crystalline cellulose nanocrystals (CNCs) have emerged as novel materials for a wide variety of important applications such as nanofillers, nanocomposites, surface coatings, regenerative medicine and potential drug delivery. CNCs have a needle-like structure with sizes in the range of 100–200 nm long and 5–20 nm wide and a mean aspect ratio 10–100. Despite the great potential applicability of CNCs, very little is known about their potential immunogenicity. Needle-like materials have been known to evoke an immune response in particular to activate the (NOD-like receptor, pyrin domain-containing 3)-inflammasome/IL-1β (Interleukin 1β) pathway. In this study we evaluated the capacity of unmodified CNC and its cationic derivatives CNC-AEM (aminoethylmethacrylate)1, CNC-AEM2, CNC-AEMA(aminoethylmethacrylamide)1 and CNC-AEMA2 to stimulate NLRP3-inflammasome/IL-1β pathway and enhance the production of mitochondrial reactive oxygen species (ROS). Mouse macrophage cell line (J774A.1) was stimulated for 24 h with 50 µg/mL with unmodified CNC and its cationic derivatives. Alternatively, J774A1 or PBMCs (peripheral blood mononuclear cells) were stimulated with CNC-AEMA2 in presence or absence of LPS (lipopolysaccharide). IL-1β secretion was analyzed by ELISA, mitochondrial function by JC-1 staining and ATP content. Intracellular and mitochondrial reactive oxygen species (ROS) were assessed by DCF-DA (2′,7′-dichlorodihydrofluorescein diacetate) and MitoSOX, respectively. Mitochondrial ROS and extracellular ATP were significantly increased in cells treated with CNC-AEMA2, which correlates with the strongest effects on IL-1β secretion in non-primed cells. CNC-AEMA2 also induced IL-1βsecretion in LPS-primed and non-primed PBMCs. Our data suggest that the increases in mitochondrial ROS and ATP release induced by CNC-AEMA2 may be associated with its capability to evoke immune response. We demonstrate the first evidence that newly synthesized cationic cellulose nanocrystal derivative, CNC-AEMA2, has immunogenic properties, which may lead to the development of a potential non-toxic and safe nanomaterial to be used as a novel adjuvant for vaccines.

•

Immunogenicity of CNC derivatives was studied on the NLRP3 inflammasome pathway.

•

Only CNC-AEMA2 induced IL-1β secretion in non-primed and primed macrophages.

•

IL-1β secretion caused by CNC-AEMA2 involves mitochondrial ROS and ATP release.

Cationic Cellulose Nanocrystals: Synthesis, Characterization and Cytotoxicity Studies

Cellulose nanocrystals (CNCs) have emerged as a new class of renewable material for various applications due to their remarkable properties and commercialization prospect. The relative low density, expected low cost, non-toxic character, uniform nanosize distribution, high aspect ratios, high surface area, thermal properties and high modulus of elasticity make CNCs attractive nanomaterials that recently prompted the industrial production of CNCs in North America. Surface functionalization of CNCs continues to be an exciting area of research for the design of novel CNC-based materials. In this work, we report the synthesis, characterization and cytotoxicity studies of novel cationic surface modified CNC derivatives. The negative surface of CNC was rendered positive after grafting with cationic polymers via surface-initiated living radical polymerization method. The modified CNCs were characterized by both spectroscopic and microscopic techniques. Their cytotoxicity effects were evaluated using MTT assay in two cell lines such as mouse macrophages (J774.A1) and human breast cancer (MCF7). Preliminary studies indicated that only one of the modified CNCs caused significant decrease in J774.A1 cell viability (50%), at the highest concentration tested (100 µg/mL). However this concentration is well above of what would be applicable for biomedical purposes. MCF7 cells were not affected by any of the cationic CNCs at any concentration. A detailed cytotoxicity study is currently underway to fully understand the interaction of these cationic CNCs with the biological systems for possible bio-inspired applications.

The impact of cellulose nanocrystals on the aggregation and initial adhesion of Pseudomonas fluorescens bacteria

Deposition on silica surfaces of two Pseudomonas fluorescens strains (CHA0 and CHA19-WS) having different extracellular polymeric substance (EPS) producing capacities was studied in the absence and presence of cellulose nanocrystals (CNCs). Batch (batch soaking) and continuous flow (quartz crystal microbalance with dissipation) methods were used to evaluate the impact of CNCs on bacterial initial adhesion. This study demonstrated that bacterial initial adhesion to solid surfaces can be significantly hindered by CNCs using both methods. In the presence of CNCs, it was observed that bacteria with more EPS aggregated more significantly compared to bacteria with less EPS, and that bacterial deposition under this condition decreased to a greater extent. The classic DLVO theory failed to predict bacterial adhesion behavior in this study. A detailed discussion is provided regarding potential antibacterial adhesion mechanisms of CNCs.

Amine-decorated nanocrystalline cellulose surfaces: synthesis, characterization, and surface properties

In this present work, terminal amino-functionalized nanocrystalline cellulose derivatives were prepared using a simple two-step protecting group-free protocol under aqueous reaction conditions at room temperature. Carboxylate groups were first introduced onto the surface of nanocrystalline cellulose (NCC) via a TEMPO-mediated oxidation. Then, reaction of surface-carboxylated NCC with bifunctional amines of small alkyl chain length by EDC/NHS-mediated coupling furnished the desired aminated NCC via an amide linkage. Surface covalent functionalization was confirmed by Fourier transform infrared spectroscopy, elemental analysis, and X-ray photoelectron spectroscopy. Size, surface charge, morphology, and thermal properties were obtained by various techniques. STEM images revealed no change in structure and morphology of the materials after TEMPO-mediated oxidation but a slight agglomeration was observed after surface covalent functionalization with diamines. While amide linkage confers stability, terminal primary amine groups on the surface of NCC represent a versatile reactive functional group for bioconjugation with other biomolecules for potential biomedical applications.

Dispersions of nanocrystalline cellulose in aqueous polymer solutions: structure formation of colloidal rods

The steady-state shear and linear viscoelastic deformations of semidilute suspensions of rod-shaped nanocrystalline cellulose (NCC) particles in 1.0% hydroxyethyl cellulose and carboxymethyl cellulose solutions were investigated. Addition of NCC at the onset of semidilute suspension concentration significantly altered the rheological and linear viscoelastic properties of semidilute polymer solutions. The low-shear viscosity values of polymers solutions were increased 20-490 times (depending on polymer molecular weight and functional groups) by the presence of NCC. NCC suspensions in polymer solutions exhibited yield stresses up to 7.12 Pa. Viscoelasticity measurements also showed that NCC suspended polymer solutions had higher linear elastic moduli than the loss moduli. All of those results revealed the gel formation of NCC particles and presence of internal structures. The formation of a weak gel structure was due to the nonadsorbing macromolecules which caused the depletion-induced interaction among NCC particles. A simple interaction energy model was used to show successfully the flocculation of NCC particles in the presence of nonadsorbing polymers. The model is based on the incorporation of the depletion interaction term between two parallel plates into the DLVO theory for cubic prismatic rod shaped NCC particles.

Evaluation of Oil Recovery Performances of Surfactants Using Organic Conception Diagrams

Abstract

Capillary imbibition experiments conducted on sandstone, chalk, and limestone samples using different oils (crude and processed with different viscosities) and different surfactant solutions were evaluated for surfactant screening. In this evaluation, IFT, surfactant type, and concentration were considered. In addition to these, a new technique has been adopted to facilitate the surfactant screening process. This technique is based on assigning inorganic and organic property values and plotting Organic Conception Diagrams (OCD) for surfactants. OCD defines the property of a compound in terms of physical chemistry in such a way that the property that depends to a large extent on Van der Waals force is called "organic" and the one that depends greatly on electric affinity is called "inorganic." By using the OCD, hydrophilic and lipophilic characters of surfactants have been established to evaluate their potential to minimize oil/water interfacial tension.

Introduction

Using surfactant solutions as a displacement fluid to recover matrix oil in naturally fractured reservoirs (NFR) has gained a great deal of attention in recent years. Capillary imbibition recovery can be enhanced by the addition of surfactant into water to reduce the IFT(1). Typically an increase in the ultimate recovery with lowered IFT was observed for sandstones(2, 3). The imbibition rate also changes with reduced IFT

. Due to the less water-wet character of carbonates, in many cases, very low imbibition recovery was obtained with brine(4). Reduction of IFT by the addition of surfactant yielded a significant increase in recovery due to enhanced capillary imbibition and additional contribution due to gravity effect(3–4). More attention was devoted to chalky carbonates as they are found to be more responsive to low-IFT capillary imbibition recovery compared to the dolomitic carbonates(5–7).

It was observed that the response to the surfactant capillary imbibition recovery could be very different depending on the rock type and fluid properties even if the same surfactant type and concentration are used. For example, sandstones yielded initially faster recovery with high IFT solution (typically brine with no surfactant addition) but ultimate recovery becomes higher with decreasing IFT(1, 4). Carbonates, however, behaved in a different manner. It was previously reported that both the recovery rate and ultimate recovery increased with decreasing IFT for dolomitic limestone(3,4). Experiments on chalk samples showed that the type of surfactant plays a critical role on the ultimate recovery as well as the recovery rate(7–9).

In this paper, we present an analysis to correlate the capillary (spontaneous) imbibition recovery performance of surfactant solutions to surfactant, rock, and fluid properties. We also introduced a newly adopted technique known as Organic Conception Diagrams (OCD).

Experiments

In this study, experimental results obtained from different Studies(3, 4, 7, 9–12) were used. In addition, seven experiments were conducted on chalk samples using 17 cp oil at 20 °C. Four different surfactants were selected as a representative of non-ionic, anionic, and cationic types. Spontaneous imbibition experiments were conducted on 100% oil saturated cylindrical rock samples with all sides open to flow.

Oil recovery performances of surfactant solutions by capillary imbibition

Critical parameters playing a role in oil recovery by capillary imbibition of surfactant solutions were studied. Experiments conducted on sandstone and carbonate samples using different oil and surfactant types were evaluated for surfactant selection. In this evaluation interfacial tension (IFT), surfactant type, solubility characteristics of surfactants, rock type, initial water (pre-wet rock), and surfactant concentration were considered. In addition to these, a new technique was adopted to facilitate the surfactant screening process. This technique is based on assigning inorganic and organic property values and plotting organic conception diagrams (OCD) for surfactants. OCD defines the property of a compound in terms of physical chemistry in such a way that the property that depends much on the van der Waals force is called "organic" and the one that depends much on electric affinity is called "inorganic." Correlations between the capillary imbibition recovery performance and the properties of surfactant and oil (organic value (OV), inorganic value (IV), and IFT of surfactant solutions, oil viscosity, and surfactant type) were obtained. These correlations are expected to be useful in selecting the proper surfactant for improved oil recovery as well as identifying the effects of surfactant properties on the capillary imbibition performance.