Physicochemical homogeneity of stingless bee honey (Heterotrigona itama) produced in the west coast, east coast and inland area of Peninsular Malaysia

BACKGROUND

The nutritional composition of stingless bee honey (SBH) can be affected by different climates and soil composition across different geographical areas. However, the range of attributes set for a honey quality standard should be inclusive. This study analysed the sugar profile's physiochemical properties, including quantifying the rare sugar trehalulose, organic acid and mineral composition of SBH collected from inland, and west and east coasts of Peninsular Malaysia. Forty-three SBH (Heterotrigona itama) samples were collected and labelled as <20 and <40 West Coast (<20WC, <40WC), <20 and <40 East Coast (<20EC, <40EC) and Inland, according to their distance from the coasts.

RESULTS

The moisture, pH and sugar composition of all SBH samples adhered to the Malaysian Kelulut Honey Standard (MS2683:2017) but not to the International Codex Standard (CODEX) for honey. Trehalulose presence in all samples, regardless of geographical area, was predominant alongside fructose and glucose. Only hydroxymethylfurfural (HMF) content and electrical conductivity (EC) results complied with both standards. The principal component analysis biplot showed that the discrimination of SBH according to the five different areas was not feasible, indicating sample homogeneity.

CONCLUSION

The physicochemical evaluation of SBH from Peninsular Malaysia shows mainly homogeneous attributes of samples across geographical locations. These findings demonstrated that the current MS2683:2017 is relevant and accommodates all SBH of H. itama species produced in Peninsular Malaysia. Furthermore, the trehalulose range calculated in this study can be implemented as a new benchmark for the indicator of SBH honey quality standard by national and international food standard committees. © 2023 Society of Chemical Industry.

Optimization of Pluchea indica (L.) leaf extract using ultrasound-assisted extraction and its cytotoxicity on the HT-29 colorectal cancer cell line

Colorectal cancer (CRC) is the most common malignancy and the third primary cause of cancer-related mortalities caused by unhealthy diet, hectic lifestyle, and genetic damage. People aged ≥ 50 are more at risk for CRC. Nowadays, bioactive compounds from plants have been widely studied in preventing CRC because of their anticancer and antioxidant properties. Herein, ultrasound-assisted extraction (UAE) was used to extract the bioactive compounds of Pluchea indica (L.) leaves. The resultant total phenolic content (TPC) and total flavonoid content (TFC) of P. indica (L.) leaves were analyzed using a response surface methodology (RSM). The central composite design was implemented to evaluate the amplitude (10 %-70 %) and treatment time (2-10 min) on both responses, i.e., TPC and TFC of P. indica (L.) leaves. The optimum UAE conditions were observed 40 % amplitude and 6 min of treatment, where the TPC and TFC were 3.26 ± 0.00 mg GAE/g d.w. and 67.58 ± 1.46 mg QE/g d.w., respectively. The optimum P. indica (L.) leaf extract was then screened for its cytotoxicity on the HT-29 colorectal cancer cell line. This extract had strong cytotoxicity with a half-maximal inhibitory concentration value (IC50) of 12 µg/mL. The phytochemical screening of bioactive compounds revealed that the optimal P. indica (L.) leaf extract contains flavonoids, namely, kaempferol 3-[2''',3''',5'''-triacetyl]-alpha-L-arabinofuranosyl-(1->6)-glucoside, myricetin 3-glucoside-7-galactoside, quercetin 3-(3''-sulfatoglucoside), and kaempferol 7,4'-dimethyl ether 3-O-sulfate, which could be good sources for promising anticancer agents. This study employs the RSM approach to utilize UAE for bioactive compounds extraction of P. indica (L.) leaves, identified the specific compounds present in the optimized extract and revealed its potential in preventing CRC.

Evaluation of Physicochemical Properties of a Hydrocolloid-Based Functional Food Fortified with Caulerpa lentillifera: A D-Optimal Design Approach

This study introduced a D-optimal design mixture to assess the physicochemical properties of a hydrocolloid-based functional food fortified with C. lentillifera. The combination incorporated vital jelly constituents, including extract (10-15%), sweeteners (20-29%), gelling agents (k-carrageenan and locust bean gum (LBG)), and preservatives (0-0.05%). The dependent variables were pH, Total Soluble Solid (TSS) value, and moisture content (MS). By employing the D-optimal design approach, a quadratic polynomial model was developed, demonstrating strong correlations with the experimental data with coefficient determinations (R²) of 0.9941, 0.9907, and 0.9989 for pH, TSS, and MS, respectively. Based on the D-optimal design, the study identified the optimum combination of significant factors with a desirability of 0.917, comprising 14.35% extract, 23.00% sucrose, 21.70% fructose, 26.00% k-carrageenan, 13.00% LBG, 1.95% CaCl₂, and 0% methylparaben. The percentage of residual standard error (RSE) was less than 5%, indicating the reliability of the developed model. Furthermore, color analysis revealed significant differences among the jellies (p < 0.05). HPLC analysis demonstrated that the total sugar content in the fortified jellies was 28% lower compared to commercial jelly. Meanwhile, the bitterness level according to e-tongue showed a reduction of up to 90.5% when compared to the extract. These findings provide a valuable benchmark for the development of functional food products, ensuring their quality, safety, and extended shelf-life.

Determination of Physicochemical, Textural, and Sensory Properties of Date-Based Sports Energy Gel

Applying energy supplements in gel form may circumvent gastric discomfort and thus it is a practical alternative. The main objective of this investigation was to develop date-based sports energy gels consisting of highly nutritious ingredients such as black seed (Nigella sativa L.) extract and honey. Three date cultivars (Sukkary, Medjool, and Safawi) were used and characterized for their physical and mechanical properties. The sports energy gels were prepared with addition of xanthan gum (0.5% w/w) as the gelling agent. The newly developed date-based sports energy gels were then analysed for proximate composition, pH level, colour, viscosity, and texture profile analysis (TPA). A sensory test was also conducted with 10 panellists who analysed the appearance, texture, odour, sweetness, and overall acceptability of the gel using a hedonic scale. The results showed that different types of date cultivars affect the physical and mechanical properties of the new developed gels. The outputs of the sensory evaluation revealed that the date-based sports energy gel prepared from Medjool received the highest mean score, followed closely by those prepared from Safawi and Sukkary, indicating that, overall, all three cultivars are acceptable to consumers, but the date-based sports energy gel prepared from Medjool is the most preferred one.

Differentiation of High-Fructose Corn Syrup Adulterated Kelulut Honey Using Physicochemical, Rheological, and Antibacterial Parameters

Kelulut (stingless bee) honey (KH) possesses a wide range of benefits for human consumption and can exhibit medical effects. Due to its high value, this premium honey is often adulterated with different types of cheaper sugars, causing low nutrients and potential food safety threats in the final product. This study aims to determine the physicochemical, rheological, and antibacterial properties of sugar-based adulterated KH from the stingless bee species Heterotrigona itama. Adulterated samples were prepared using pure honey mixed with different concentrations of high fructose corn syrup (HFCS), i.e., 10%, 20%, 30%, 40%, and 50%. Water activity, colour, total soluble solids, pH, turbidity, viscosity, and antimicrobial activity of KH were determined. In addition, the primary sugar composition (fructose, glucose, and trehalulose) was determined by high-performance liquid chromatography with evaporative light-scattering detection (HPLC-ELSD). This study shows that the increasing percentage of HFCS addition in the KH samples significantly increases (p < 0.05) the total soluble solids, colour, pH, turbidity, viscosity, glucose, and fructose content; meanwhile, the water activity and trehalulose were reduced significantly (p < 0.05). Antimicrobial activity against S. aureus was reduced significantly (p = 0.006) by an increased percentage of HFCS compared to Control. Antimicrobial activity against P. aeruginosa was also found to be reduced significantly but showed non-significant effect from an increased percentage of HFCS in honey (p = 0.413). The bacterium S. aureus was more vulnerable to treatment with honey from both Control and adulterated groups compared to P. aeruginosa. In conclusion, HFCS-adulterated KH and authentic KH can be differentiated using all the parameters investigated. These data are vital for the governing bodies to ensure that KH sold in the markets is free from HFCS adulteration.

Next Generation Sequencing-based DNA metabarcoding for animal species profiling in fish feed

The expansion of worldwide aquaculture has been accompanied by extensive growth in the fish feed industry. However, improper labelling of many commercially available fish feeds has raised security and safety concerns over the species' origin of the ingredients. The inclusion of ruminants-derived ingredients in fish feed is prohibited according to EU legislation while porcine inclusion in fish feed has been a great concern among Muslim farmers. In contrast to the limited species that could be simultaneously determined using multiplex PCR, this study utilised Next Generation Sequencing-based DNA metabarcoding assay to determine the compositional profiles of animal species in fish feed samples in a more holistic manner. In relation to the religious issue associated with porcine-derived ingredients in fish feed, this study firstly aimed to determine the sensitivity of the methods in profiling fish feed adulterated with porcine blood and muscle tissues. Next, 10 commercially available fish feed samples were analysed. As a result, a detection limit of as low as 3% (w/w) porcine muscle and blood in the laboratory-prepared fish feed was obtained. The analysis of 10 commercial fish feeds shows surprising findings: 50% of the feeds contain Sus scrofa and 80% contain Bos taurus, a ruminant. Only one commercial fish feed was found to be solely composed of marine species. This study shows that commercial fish feeds sold in Malaysia contain undesirable animal species, and emphasises the need for accurate and legally enforced labelling of mammalian species in fish feed products.

Production of &lsquo;kedondong&rsquo; (Spondias cytherea Sonnerat) powder as affected by different drying methods

BACKGROUND

&lsquo;Kedondong&rsquo; fruit is regarded as an exotic fruit that is gaining popularity due to its deliciousness and pleasant flavour. However, this fruit has a short shelf life, leading to problems with postharvest loss. In order to prevent losses, the fruit could be produced as a value-added product. In this study, the &lsquo;kedondong&rsquo; fruit was preserved by drying into powder using different drying methods.

METHODS

The kedondong powder was dried using five methods: convection oven drying, vacuum drying, spray drying, drum drying and freeze drying. The physical properties, flowability and DPPH radical scavenging ability of dried kedondong powder were examined.

RESULTS

Spray-dried powder provided the significantly (p &le; 0.05) highest process yield, which was 54.93%. All the powder produced had a low moisture content (3.03 to 5.66%) and water activity (0.19&ndash;0.37). Visually, whitish and fine powders were observed on spray-dried and freeze-dried samples, while convection oven-dried and vacuum-dried powder appeared yellowish and coarse. The pH of the reconstituted powders varied from 2.71 to 2.83, where drum-dried powder was the most acidic. Spray-dried powder showed the highest wettability and shortest dissolution time, which was 172.65 s and 10.55 s, respectively. With the exception of drum-dried powder, all the dried powders were classified as non-caking powders. The bulk and tapped density of the powders ranged from 0.32 to 0.70 g/mL and 0.38 to 0.86 g/mL, respectively. Vacuum-dried powder had very good flowability, convection oven-dried and drum-dried powder had good flowability, while spray-dried and drum-dried powder had fair flowability. Antioxidant assay showed that freeze-dried powder exhibited the highest free radical scavenging activity (IC50 = 701.29 &mu;g/mL).

CONCLUSIONS

This study indicates that spray-dried kedondong powder has great potential in the food industry due to its high process yield and better powder quality. Meanwhile, freeze drying best preserved the antioxidant properties of the powder, which could potentially be used as a functional ingredient as a result. This study is important for the fruit processing industry as it offers an alternative for the farmer to produce kedondong fruit powder because the fruit has a short shelf life. Converting the fruit into powder can diversify the resulting produce into different applications, such as fruit juice, beverages, jam and other food products.

Innovative Method for Longer Effective Corrosion Inhibition Time: Controlled Release Oil Palm Empty Fruit Bunch Hemicellulose Inhibitor Tablet

This study aims to develop a controlled release oil palm empty fruit bunch hemicellulose (EFB-H) inhibitor tablet for mild steel in 1 M HCl. As plant extracts tend to deteriorate at longer immersion time, limiting its industrial applicability, we attempted to lengthen the inhibition time by forming a controlled release inhibitor tablet. Electrochemical methods (potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS)) were employed to investigate the efficiency and mechanism of the inhibition. An optimum dosage and immersion time was determined via Response Surface Methodology (RSM). EFB-H tablet was formulated using D-optimal mixture design, and its anticorrosion action at extended immersion time was compared with EFB-H powder. PDP measurement revealed that EFB-H is a mixed type inhibitor. RSM optimization unveiled that the optimum point for a maximum inhibition efficiency (87.11%) was at 0.33 g of EFB-H and 120 h of immersion time. Tablet T3 with EFB-H to gum Arabic to hydroxypropyl methylcellulose ratio of 66:0:34 portrayed the best tensile strength (0.243 MPa), disintegration time (152 min) and dissolution behavior. EFB-H tablet exhibited a longer-lasting inhibition effect than powder, which was 360 h as compared to 120 h for powder. Overall, EFB-H tablet has been successfully developed, and its enhanced effective inhibition time has been experimentally proven.

Characterization of Anthocyanin Associated Purple Sweet Potato Starch and Peel-Based pH Indicator Films

In food packaging, smart indicator films based on natural resources have greatly attracted researchers to minimize the environmental issues as well as to satisfy consumer preferences for food safety. In this research, pH-sensitive films were prepared using purple-fleshed sweet potato starch (SPS) and sweet potato peel (SPP). Two categories of the film (i) SPS and (ii) SPS/SPP, were fabricated via solvent casting technique, incorporating different concentrations of commercial purple sweet potato anthocyanin (CA) at 0%, 1%, 1.5%, and 2% (w/v) and the physicochemical, mechanical, thermal, and morphological properties of the films were investigated. The thickness, water solubility, and swelling degree of the films increased with the increment of CA, whereas there were no significant changes in the water content (WC) of the films. Water vapor permeability (WVP) was decreased for SPS films while statistically similar for SPS/SPP films. The addition of CA reduced the tensile strength (TS) and tensile modulus (TM) yet increased the elongation at break (EaB) of the films as compared to films without CA. The FTIR results confirmed the immobilization of anthocyanin into the film. In SEM images, roughness in the surfaces of the CA-associated films was observed. A reduction of thermal stability was found for the films with anthocyanin except for the SPS/SPP CA 2% film. Furthermore, the CA-associated films showed a remarkable color response when subjected to pH buffers (pH 1 to 12) and successfully monitored chicken freshness. The fastest color migration was observed in acidic conditions when the films were immersed into aqueous, acidic, low fat, and fatty food simulants. The findings of this work demonstrated that the developed pH indicator films have the potential to be implemented as smart packaging to monitor food freshness and quality for safe consumption.

Effects of inlet temperature and carrier concentration on spray-dried 'cempedak' (Artocarpus integer) fruit powder and its reconstitution properties

BACKGROUND

'Cempedak' (Artocarpus integer) is an aromatic fruit which is similar to jackfruit. Although it is rich in vitamin A and is consumed fresh, the fruit has a short shelf life. Hence, it can be converted through a spray-drying process, to form powder, which is more stable. Powder flow properties are important when considering storage, while its reconstitution characteristics are critical for the consumer to make juice from the product.

METHODS

The parameters of spray-dried 'cempedak' fruit powder under study include inlet air temperature (140-180°C) and maltodextrin (DE 10) concentrations (5-15% w/w). Response surface methodology involving 14 runs was used to assess the effects of inlet temperature and maltodextrin on the powder flow properties and reconstitution properties of the spray-dried 'cempedak' powder.

RESULTS

Out of the tested responses, only bulk density, change in cake height ratio, and water solubility index had a high coefficient of determination value. Inlet air temperature was found to be the main parameter to affect the bulk density, caking and water solubility index, when compared to maltodextrin concentration. By setting minimization of caking and maximization of water solubility index as the main determinants, the optimal parameters of 160°C inlet temperature and 15% (w/w) maltodextrin DE10 were generated, with a desirability of 0.697.

CONCLUSIONS

The powder produced under optimal conditions (160°C and 15% w/w maltodextrin) had a low bulk density (480.01 kg/m3), low caking properties (0.17 change in cake height ratio), and a high solubility index (88.69). This indicates that the powder is stable to be stored (without caking) and will have good reconstitution when added to water.

Development of chitosan edible film incorporated with Chrysanthemum morifolium essential oil

BACKGROUND

Biodegradable food packaging has improved in quality with recent research incorporating natural extracts for functionality purposes. This research aims to develop chitosan film with Chrysanthemum morifolium essential oil to improve the shelf life of fresh raw chicken and beef.

METHODS

1.5% (w/v) chitosan films with Chrysanthemum morifolium essential oil (0% to 6% (v/v)) were produced through homogenization, the casting of a film solution in a petri dish and convection drying. The edible film was evaluated in terms of its physical (color, thickness, water vapor permeability), mechanical (puncture strength, tensile strength, elongation at break) and chemical properties (antioxidant assay, Fourier Transform Infrared Spectroscopy (FTIR)).

RESULTS

With an increasing concentration of Chrysanthemum morifolium in the chitosan film, the test values of physical properties such as tensile strength, puncture force, and elongation at break declined significantly. However, the thickness, water permeability, and color profile (L*, a*, b*) values of the chitosan film increased. Similarly, the scavenging effect of antioxidant assay increased (from 4.97% to 18.63%) with a rise in Chrysanthemum morifolium concentration. 2%, 3%, and 4% of Chrysanthemum morifolium in the chitosan film showed a significant inhibition zone ranging from 2.67 mm to 3.82 mm against Staphylococcus aureus, a spoilage bacterium that is commonly found in chicken and beef products. The storage and pH tests showed that 4% of Chrysanthemum morifolium in the film maintained pH level (safe to consume), and the shelf life was extended from 3 days to 5 days of meat storage.

CONCLUSIONS

This study demonstrated that the incorporation of 4% (v/v) Chrysanthemum morifolium extract into 1.5% (w/v) chitosan film extends the storage duration of raw meat products noticeably by reducing Staphylococcus aureus activity. Therefore, it increases the quality of the edible film as an environmentally friendly food packaging material so that it can act as a substitute for the use of plastic bags. Future studies will be conducted on improving the tensile strength of the edible film to increase the feasibility of using it in the food industry. In addition, the microstructure and surface morphology of the edible film can be further determined.

Hydroxyproline determination for initial detection of halal-critical food ingredients (gelatin and collagen)

Gelatin and collagen are considered halal-critical ingredients as they are typically derived from either bovine or porcine animals. Current analytical methods for determining the sources of gelatin and collagen suffer from limitations in terms of robustness and false positives in peptide matching. Thus, the aim of this study was to investigate the utility of monitoring hydroxyproline, a signature amino acid for gelatin and collagen, for identifying potentially haram foodstuffs. To determine the hydroxyproline profiles among animal- and plant-based samples, one-way univariate analysis of variance followed by pair-wise comparison was used to establish statistical significance. Multivariate chemometric analysis through principal component analysis revealed a discrete distribution pattern among 59 samples due to hydroxyproline variability. Finally, inter- and intra-laboratory comparisons demonstrated the validity and robustness of hydroxyproline determination according to ISO 17025. Thus, this preliminary identification technique will aid the identification of potentially haram foodstuffs.

Water-assisted synthesis of mesoporous calcium carbonate with a controlled specific surface area and its potential to ferulic acid release

A carbonation process to control the specific surface area of mesoporous calcium carbonate and the dissolution profile of ferulic acid on mesoporous carbonate particles are presented. The effects of water content on the physicochemical properties, specific surface area, pore size, crystallinity, and morphology are evaluated. Mesoporous calcium carbonate particles are synthesised with well-controlled specific surface areas of 38.8 to 234 m² g⁻¹. Each of the submicron-size secondary particles consists of a primary particle of nano-size. During secondary particle formation, primary particle growth is curbed in the case with less water content. By contrast, growth is promoted via dissolution and recrystallisation in the presence of water. The release rates of ferulic acid are gradually enhanced with increasing specific surface area of the mesoporous calcium carbonate, that reflects crystallinity of ferulic acid.

A carbonation process to control the specific surface area of mesoporous calcium carbonate and the dissolution profile of ferulic acid on mesoporous carbonate particles are presented.

Coconut (Cocos nucifera L.) sap as a potential source of sugar: Antioxidant and nutritional properties

This study was carried out to compare the antioxidant and nutritional properties of coconut (Cocos nucifera L.) sap with other natural sources of sugar such as sugar palm (Borassus flabellifer) and sugarcane (Saccharum officinarum L.). Coconut sap and juice from sugar palm and sugarcane were analyzed for proximate composition, pH and total soluble solid (TSS), color, sugar profile, vitamin profile, antioxidant properties (total phenolic contents, DPPH, FRAP, and ABTS), and mineral content. The results indicated that coconut sap possesses high DPPH (23.42%), FRAP (2.09 mM/ml), and ABTS (21.85%) compared with the juices. Coconut sap also had high vitamin C (116.19 µg/ml) and ash (0.27%) contents, especially in potassium (960.87 mg/L) and sodium (183.21 mg/L) which also indicating high content of minerals. These properties showed that coconut sap could be served as a potential healthier sugar source compared with sugar palm and sugarcane juices.

Antioxidative and Quality Properties of Full-Fat Date Seeds Brew as Influenced by the Roasting Conditions

Full-fat roasted date seeds are considered an excellent source of antioxidants which can treat many diseases. The specific objectives were to investigate the effect of roasting temperature and time on the hardness of whole seeds, moisture content of the roasted date seeds powder, DPPH radical scavenging activity, total phenolic contents, extraction yield, pH, browning index and sensory properties of the brew prepared from the full-fat roasted date seeds and to construct descriptive models that could describe this effect. Date seeds were roasted at three temperatures (160, 180 and 200 °C) for different period of times (10, 20 and 30 min) using a natural conventional oven; then grinded and next brewed. Hardness of whole seeds, moisture content of the seeds powder, DPPH radical scavenging activity and total phenolic contents, extraction yield, pH and browning index and sensory properties of the brew were significantly affected by the roasting conditions. The statistical results indicated that the proposed model could adequately describe the measured properties. Strong correlations have been found among the properties of the brew as well. The producers of the date seeds brew can utilize these results for controlling the roasting process.

Effect of the Roasting Conditions on the Physicochemical, Quality and Sensory Attributes of Coffee-Like Powder and Brew from Defatted Palm Date Seeds

Developing a bioactive brew is a novel track for revalorization of palm date byproducts. The effect of roasting temperature (160, 180 and 200 °C ) and roasting time (10, 20 and 30 min) on the hardness of the roasted date seeds, moisture content of the defatted roasted date seed powder (DRDSP), bulk density of the DRDSP, color parameters of DRDSP, quality attributes (extraction yield, pH and browning index), the chemical properties (antioxidants and total phenolic content) and the sensory attributes (color, aroma, taste and overall preference) of the brew prepared from DRDSP was studied. The physicochemical, quality, and sensory attributes were found to be significantly influenced by the roasting temperature and time. Additionally, the models proposed could satisfactorily describe the changes in the different properties during the roasting process. The optimum conditions of the roasting process obtained using the superimposed contour plot were 199.9 °C and 21.5 min. In the longer term, the results of this study would be beneficial for the manufacturers of the date seeds powder and brew.

Effects of simultaneous UV-C radiation and ultrasonic energy postharvest treatment on bioactive compounds and antioxidant activity of tomatoes during storage

The effects of a novel technology utilizing a simultaneous combination of Ultraviolet-C radiation and ultrasound energy postharvest treatment on tomato bioactive compounds during 28 days' storage period was investigated by varying Ultraviolet-C radiation intensities of 639.37 or 897.16 µW/cm² at a constant ultrasound intensity of 13.87 W/L from a 40 kHz-1 kW transducer. A minimal treatment time of 240 s at Ultraviolet-C dosage of 2.15 kJ/m² was observed to provoke a considerable increase in bioactive compounds content, proportionated to treatment time. Although treatment led to temperature increase in the system reaching 39.33 °C due to heat generation by ultrasonic cavitation, the extractability and biosynthesis of phytochemicals were enhanced resulting in 90%, 30%, 60%, 20%, and 36% increases in lycopene, total phenols, vitamin C, hydrophilic and lipophilic antioxidant activities respectively. Results present the potential use of the combined non-thermal technologies as post-harvest treatment to improve bioactive compounds and antioxidant activity during storage.

Characterization of edible bird's nest of different production, species and geographical origins using nutritional composition, physicochemical properties and antioxidant activities

Edible bird's nest (EBN) is a precious food made from the solidified saliva of swiftlets. EBN from three types of origin, namely production, swiftlet species and geographical were characterised based on its nutritional composition, physicochemical properties and antioxidant properties. Proximate composition, total phenolic content (TPC) and antioxidant activities were determined following official methods, while mineral and heavy metal contents were obtained by respective atomic adsorption spectrometry (AAS) and inductively coupled plasma-mass spectrometry (ICP-MS). Amino acids profile and sialic acid were determined using high performance liquid chromatography (HPLC). Calcium and sodium were the major elements in EBN samples at averages of 17,267 mg/kg and 13,681 mg/kg, respectively. Despite protein contents were not significantly different; interestingly the total amino acids in A. fuciphagus EBN, 64.57 g/100 g was found to be 23% higher than in A. maximus EBN. EBN from house, A. fuciphagus and Peninsular Malaysia had greater antioxidant activities, 2.33-3.49 mg AAE/g and higher sialic acid, 13.57 g/100 g while those from cave, A. maximus and East Malaysia contained more minerals like calcium and magnesium. The 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and ferric ion reducing antioxidant power (FRAP) of house, A. fuciphagus and Peninsular Malaysia EBNs were approximately 2 times greater than the others. All samples were complied with the Malaysian Standard MS 2334:2011, except for mercury and nitrite. The overall findings suggest that the quality of EBN was varied following the production, species and geographical origins.

Modelling of rheological behaviour of guava, pomelo and soursop juice concentrates via shear rate-temperature-concentration superpositioning

The steady-state flow test was conducted on pink-fleshed guava, pink-fleshed pomelo and soursop juice concentrates using a rheometer to understand its rheological behaviour. The power law model was used and a master-curve was created using the shear rate-temperature-concentration superposition technique to predict rheological properties from a wide range of temperatures and concentrations. All three juice concentrates undergo a double horizontal shift whilst the pink-fleshed guava required an additional vertical shift. The final equations show shear-thinning behaviour of pink-fleshed guava, pink-fleshed pomelo and soursop with flow behaviour index of 0.2217, 0.7507 and 0.6347, respectively. The final master-curve predicts shear stress at wide range of shear rates, i.e. between 10-2 and 106 s-1 for the pink-fleshed guava, 100 and 106 s-1 for the pink-fleshed pomelo and 100 and 107 s-1 for the soursop. The results provide useful information and effective technique to predict fruit juice concentrates behaviour affected by heat changes during processing.

Development and Standardization of Moringa oleifera Leaves as a Natural Dietary Supplement

Moringa oleifera leaves were selected as a model due to their hundreds of health benefits. On the other hand, the powder of these leaves has exhibited poor flowability, low tensile strength, bitter taste, poor dissolution rate, and lack of information regarding dosage. These are the common hurdles and limitations in the adaptation of herbal-based medications. Therefore, a comprehensive study was planned to introduce herbal-based medicines into mainstream medicines by standardization according to the U.S. Food and Drug Administration (FDA) and international pharmaceutical standards. A Simplex Lattice Design (SLD) of Design Expert 8.0 software was used to formulate different concentrations of superdisintegrant, binder/diluent, and sweeteners. An Instron Universal Testing machine coupled with a 13 mm stainless cylindrical die was used to manufacture tablets by means of direct compression method at 20 kN applied force. Therefore, selection of excipients was made on the basis of their tensile strength, flowability, and taste-masking properties. Optimum formulation was tested on rabbits for toxicity and growth rate. All formulated tablets were evaluated on standard parameters for orally disintegrating tablets described by the Food and Drug Authority (U.S.). The optimum formulation fulfills all standard parameters such as hardness, disintegration time, friability, and dissolution rate. The present formulation showed no toxicity when tested on rabbits. The present study provides a fundamental understanding of the tableting characteristics of natural medicines. The present study provides information that will help to overcome the challenges.

Thermosonication and optimization of stingless bee honey processing

The effects of thermosonication on the quality of a stingless bee honey, the Kelulut, were studied using processing temperature from 45 to 90 ℃ and processing time from 30 to 120 minutes. Physicochemical properties including water activity, moisture content, color intensity, viscosity, hydroxymethylfurfural content, total phenolic content, and radical scavenging activity were determined. Thermosonication reduced the water activity and moisture content by 7.9% and 16.6%, respectively, compared to 3.5% and 6.9% for conventional heating. For thermosonicated honey, color intensity increased by 68.2%, viscosity increased by 275.0%, total phenolic content increased by 58.1%, and radical scavenging activity increased by 63.0% when compared to its raw form. The increase of hydroxymethylfurfural to 62.46 mg/kg was still within the limits of international standards. Optimized thermosonication conditions using response surface methodology were predicted at 90 ℃ for 111 minutes. Thermosonication was revealed as an effective alternative technique for honey processing.

Effects of varying dietary carbohydrate levels on growth performance, body composition and liver histology of Malaysian mahseer fingerlings (Tor tambroides)

We investigated the effects of four iso-nitrogenous (40% crude protein) and iso-caloric (17.6 kJ g(-1)) diets with different dietary carbohydrate levels (15%, 20%, 25% and 30%) on the growth performance, feed utilization efficiency, body composition and liver histology of Malaysian mahseer (Tor tambroides) fingerlings in a 10-week feeding trial. Fish (initial weight of 0.8?0.1 g; initial total length 4.2?0.1 cm) were fed twice daily at 4% body mass. Dietary carbohydrate level had significant effects (P<0.05) on weight gain, SGR (specific growth rate), FCR (feed conversion rate), PER (protein efficiency rate), survival percentage and all nutrient retention values (PRV, LRV, CRV, ERV). Protein, carbohydrate and gross energy composition of the fish body were also significantly differed (P<0.05) among treatments. Liver histology showed mild hepatic steatosis and hypertrophy for fishes receiving a higher dietary carbohydrate inclusion. In general, treatments with 20% and 25% dietary carbohydrate levels produced better growth results compared to the rest of the treatments. Using a second-order polynomial regression analysis model, the optimal dietary carbohydrate level of 23.4% was estimated for mahseer fingerlings. ?

Simultaneous time-temperature-thickness superposition theoretical and statistical modelling of convective drying of guava

Modelling studies of guava drying and quality are presented using theoretical and statistical models by varying temperature from 55 to 75 °C and slice thickness from 3 to 9 mm. The quality of dried fruit was measured for its water activity, colour, vitamin C, and texture. The superposition technique with Midilli-Kucuk model showed efficiency in modelling the drying process with R (2)  = 0.9991. The second-order polynomial equations adequately described the quality of dried guava with regression coefficient, R (2)  > 0.7. Drying time was a good function of temperature and thickness (P < 0.001); water activity, colour and vitamin C showed strong dependence on temperature (P < 0.1); while texture was mainly influenced by its thickness (P < 0.005). The optimum drying temperature of 70 °C at slice thickness of 6 mm was determined using the desirability function method. Simultaneous modelling using the theoretical and statistical drying models provides information on water diffusion and evaporation with the drying responses and factors.

Effects of Feed Powder Quantity and Compression Pressure on the Tensile Strength of Eurycoma longifolia Jack Tablets Using Different Binders

This study investigated the direct compression properties of Eurycoma longifolia Jack tablets using binary mixtures such as microcrystalline cellulose (mcc) and κ-carrageenan (carr). The mixtures were compacted to various compression pressures ranging from 7.5 to 74 MPa at a constant compression speed of 5 mm/min. The tensile strengths of the tablets were determined by a diametral compression test. A linear relationship between the tensile strength and the compression pressure was observed under the conditions of the test; hence, the slopes of the data were obtained by fitting linear trend lines. This paper shows that binary mixtures of 30% mcc and 70% Eurycoma longifolia Jack give the highest values for constant (a slope) compared with the other binary mixtures of both binders. Thus, this approach can be used to develop formulations for Eurycoma longifolia Jack tablets.

Extractive fermentation for improved production and recovery of lipase derived from Burkholderia cepacia using a thermoseparating polymer in aqueous two-phase systems

An extractive fermentation technique was developed using a thermoseparating reagent to form a two-phase system for simultaneous cell cultivation and downstream processing of extracellular Burkholderia cepacia lipase. A 10% (w/w) solution of ethylene oxide-propylene oxide (EOPO) with a molecular mass of 3900 g/mol and pH 8.5, a 200 rpm speed, and 30 °C were selected as the optimal conditions for lipase production (55 U/ml). Repetitive batch fermentation was performed by continuous replacement of the top phase every 24h, which resulted in an average cell growth mass of 4.7 g/L for 10 extractive batches over 240 h. In scaling-up the process, a bench-scale bioreactor was tested under the conditions that had been optimized in flasks. The production rate and recovery yield were higher in the bioreactor compared to fermentation performed in flasks.

The influence of operational parameters and feed preparation in a convective batch ribbon powder mixer

Purpose

To investigate the effect of feed preparation characteristics and operational parameters on mixing homogeneity in a convective batch ribbon mixer.

Methods

Lactose 100M, lactose 200M, ascorbic acid, and zinc oxide powders were used for the mixing study. Operational parameters studied were rotational speed and mixing time. The feed preparations studied were the use of preblending and the particle size of the feed materials. The blends of ascorbic acid, zinc oxide, and lactose were prepared with preblending and without preblending, prior to mixing at different blender rotation speeds and mixing times. Chemical tests were performed to measure the homogeneity of the ascorbic acid in the model mixture.

Results

With preblending, a mixture with lactose 200M achieved the required homogeneity in a shorter period of time at a lower rotational speed.

Conclusion

The results indicated that the homogeneity of the mixtures was influenced by the blender rotation speed and mixing time. Better mixing can be obtained with higher rotation speeds and longer mixing time. It was also observed that preblending and smaller feed particle size achieved the required homogeneity in a shorter period of time at a lower rotational speed. These results illustrate that using binders with a smaller particle size and a preblending technique improves the mixing process in a convective batch ribbon powder mixer. However, prolonged periods of high-speed mixing will lead to mixture segregation.