Association of the methionine sulfoxide reductase A rs10903323 gene polymorphism with functional activity and oxidative modification of alpha-1-antitrypsin in COPD patients

OBJECTIVE

Chronic obstructive pulmonary disease (COPD) is multi-factorial disorder which results from environmental influences and genetic factors. We aimed to investigate whether methionine sulfoxide reductase A (MSRA) rs10903323 gene polymorphism is associated with COPD development and severity in Serbian adult population.

METHODS

The study included 155 patients with COPD and 134 healthy volunteers. Genotyping was determined performing home-made polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). The difference between the inhibitory activities of normal and oxidized Alpha-1-Antitrypsin (A1AT) against elastase and trypsin was used for determination of Oxidized Alpha-1-Antitrypsin (OxyA1AT) (expressed as % and g/L). Functional activity of A1AT was presented as a specific inhibitor activity to elastase (SIA-Elastase, kU/g).

RESULTS

Frequencies of the genotypes AA, AG and GG were 80.0%, 20.0%, 0% in COPD patients and 80.5%, 18.5% and 1.5% in the control group, and there was no significant difference in genotype or allele distributions between groups. Serum level of A1AT (g/L) and OxyA1AT was significantly higher in COPD patients than in the control group, but functional activity of A1AT (SIA-Elastase) was significantly lower in COPD patients than in the control group. In COPD group, increased level of OxyA1AT was present in G allele carriers who were smokers relative to G allele carriers who were not smokers. In the smoker group of patients with severe and very severe COPD (GOLD3+4), significant increase in OxyA1AT level was present in G allele carriers compared to AA homozygotes.

CONCLUSION

These findings suggest that MSRA rs10903323 gene polymorphism is probably not a risk for COPD by itself but could represent a COPD modifier, since minor, G allele, is associated with an increased level of oxidized A1AT, indicating impaired ability of MSRA to repair oxidized A1AT in COPD-smokers, and in severe form of COPD.

Primary Stability of Trabecular Metal Implant in Comparison to Fully Threaded Implants: In Vitro Study Simulating Immediate Implant Placement

The aim of this study was to evaluate primary stability of 3.7-mm diameter porous tantalum Trabecular Metal (TM) implant, and compare it to fully threaded implants, in the in vitro model of immediate implant placement in the anterior maxilla. A total of 60 implants were placed into bovine ribs using surgical guides. Implants were divided in 3 groups of 20 according to the design: TM, Tapered Screw-Vent (TSV), and NobelReplace. To simulate immediate placement in anterior maxilla, implants were placed under a sharp angle toward the ribs, not fully submerged. Placement angle of 20.7° was calculated after analysis of 148 virtually planned implants on cone beam computerized tomography scans of 40 patients. No statistically significant difference in implant stability quotient (ISQ) was found between TM (65.8 ± 2.6), TSV (64.7 ± 2.7), and NobelReplace (64.6 ± 2.7). TSV implants achieved higher insertion torque (37.0 ± 4.8 Ncm) than TM (32.9 ± 5.2 Ncm) and NobelReplace (23.2 ± 3.3 Ncm). TSV had the shortest insertion time of 13.5 ± 1.0 seconds, compared to 15.2 ± 1.2 seconds for TM, and 19.7 ± 1.7 seconds for NobelReplace. Pearson correlation analysis showed significantly correlated insertion torque and ISQ values for TM group (P = .011, r = .56), a nonsignificant correlation was found for TSV and NobelReplace. The results of the present study indicate that TM implant can achieve good primary implant stability in insertion torque and resonance frequency analysis.

Influence of titanium implant macrodesign on peri-implantitis occurrence: a cross-sectional study

OBJECTIVES

To assess whether implant macrodesign parameters interacting with implant time in function (Tf) could influence the peri-implantitis occurrence.

MATERIALS AND METHODS

One hundred and two patients (55.17 ± 11.2 years old) with diagnosed early/moderate peri-implantitis around endosseous implants with implant-supported prosthetics reconstruction (n = 139) were recruited. Implant macrodesign (implant shape, thread number, implant collar), clinical parameters (peri-implant probing depth (PPD), clinical attachment level (CAL), keratinised tissue width (KTW), plaque index, bleeding on probe), implant placement localisation and region, and Tf were assessed and compared.

RESULTS

Peri-implantitis occurred approximately 6.1 ± 3.38 years after implant loading. There was a significant positive correlation between the implant macrodesign and Tf. Peri-implantitis rates were statistically significantly higher in implants with a cylindric shape and triple-thread in the posterior part of the mandible (p = 0.037 and 0.012, respectively). The thread number and implant shape interacting with Tf showed statistically significant influences on CAL and PPD increase (p < 0.05). Results indicated a statistically positive interaction between Tf and KTW decrease around the implants with microthreaded collar (p < 0.001).

CONCLUSION

Peri-implantitis might be presented as a time-dependent disease. Implant-based factors, such as Tf and implant macrodesign, could influence peri-implantitis occurrence, exacerbate clinical parameters, and promote progressive bone loss.

CLINICAL RELEVANCE

Peri-implantitis can be affected by implant macrodesign and Tf. The implant body shape, thread number, and design of the implant collar may be considered peri-implantitis-related risk indicators that should be taken into account in proper implant planning and therapy.

Follow-up dental examination a day after apicoectomy using the store-and-forward method

Background/Aim. Although apicoectomy is performed routinely and yields excellent results, a close patient observation during the postoperative course is desirable in order to avoid possible complications. The aim of this study was to investigate the adequacy of postoperative control visits a day after surgery using the store-and-forward telemedicine method compared to the clinical in-person controls. Methods. A total of 122 apicoectomies were performed during 115 dental surgery interventions. The follow-up dental ex-amination a day after apicoectomy consisted of reviewing extraoral and intraoral photographs on the internet and re-viewing responses to the questionnaire. After that, patients were examined in-person. Cohen?s kappa (?store-and-forward? method) coefficient, diagnostic sensitivity (SE), sensitivity (SP), and efficiency (EFF) were determined. Statistical comparisons were performed using the Z-test, and nonparametric characteristics were tested using McNemar?s ?2-test at the statistical significance cut-off value of p = 0.05. Results. There were 106 (92%) patients seen at the control dental examination. The agreement between in-person and store-and-forward telemedicine method was found in 104 (98%) cases. The obtained agreement values (K = 0.85, S = 0.99, SP = 0.86, EFF = 0.98) indicated an almost complete diagnostic agreement. Conclusion. Based on the internet transmission of patients? digital photographs and ac-companying patient medical history records, the study showed that the in-person control dental examinations a day after surgery can be successfully replaced with the remote store-and-forward method of telemedicine.

Oxidized Alpha-1-Antitrypsin as a Potential Biomarker Associated with Onset and Severity of Chronic Obstructive Pulmonary Disease in Adult Population

Oxidative stress could reduce inhibitor activity of the alpha-1-antitrypsin (A1AT). Oxidative-modified A1AT (oxidized alpha-1-antitrypsin, OxyA1AT) significantly loses ability to protect the lungs from neutrophil elastase. We aimed to investigate OxyA1AT as a potential biomarker associated with onset and severity of chronic obstructive pulmonary disease (COPD) in adult population. The study included 65 patients with COPD (33 smokers and 32 no-smokers) and 46 healthy participants (17 smokers and 29 no-smokers). Determination of OxyA1AT in serum was based on the difference between the inhibitory activities of normal and oxidized A1AT against trypsin and elastase. The level of OxyA1AT was significantly increased in the group of COPD smokers compared to healthy no-smokers (p = 0.030) and COPD no-smokers (p = 0.009). The highest level of OxyA1AT was found in group of smokers with severe and very severe COPD in comparison to the following: no-smokers with the same stage of disease (p = 0.038), smokers with moderate COPD (p = 0.022), and the healthy control group, regardless of the smoking status (control no-smokers p = 0.001 and control smokers p = 0.034). In conclusion, serum level of OxyA1AT would be potentially good biomarker for the assessment of harmful effect of smoking to the onset and severity of COPD. Also, clinical significance of OxyA1AT as prognostic biomarker could be useful in assessing the effectiveness of antioxidant therapy for COPD and emphysema. Suitable and inexpensive laboratory method for determination of OxyA1AT is additional benefit for the introduction of OxyA1AT into routine clinical practice for diagnosis and monitoring of COPD.

Clinical Characteristics of Abutment Teeth with Gingival Discoloration

PURPOSE

The grey-bluish discoloration of gingiva (known as "amalgam tattoo") does not appear only in the presence of amalgam restorations. It may also be seen in cases of teeth restored with cast dowels and porcelain-fused-to-metal (PFM) restorations. The aim of this article was to determine the clinical characteristics of abutment teeth with gingival discoloration.

MATERIALS AND METHODS

This research was conducted on 25 patients referred for cast dowel and PFM restorations. These restorations were manufactured from Ni-Cr alloys. Ninety days after cementing the fixed prosthodontic restorations, the abutment teeth (n = 61) were divided into a group with gingival discoloration (GD) (n = 25) and without gingival discoloration (NGD) (n = 36). The control group (CG) comprised the contralateral teeth (n = 61). Plaque index, gingival index, clinical attachment level, and probing depth were assessed before fabrication and also 90 days after cementation of the PFM restorations.

RESULTS

The gingival index, clinical attachment level, and probing depths of the abutment teeth that had GD were statistically higher before restoration, in comparison with the abutment teeth in the NGD and control groups. Ninety days after cementation, the abutment teeth with GD had significantly lower gingival indexes and probing depths, compared to the abutment teeth in the NGD group. Both abutment teeth groups (GD and NGD) had significantly higher values of clinical attachment levels when compared to the control group. There were no statistically significant differences in plaque index values between the study groups.

CONCLUSIONS

The results of this study indicated that impairment of periodontal status of abutment teeth seemed to be related to the presence of gingival discolorations. Therefore, fabrication of fixed prosthodontic restorations requires careful planning and abutment teeth preparation to minimize the occurrence of gingival discolorations.

CLINICAL RELEVANCE

With careful preparation of abutment teeth for cast dowels and crown restorations it may be possible to decrease the frequency of gingival discolorations adjacent to abutment teeth.

Comparative radiographic and resonance frequency analyses of the peri-implant tissue after dental implants placement using flap and flapless techniques: An experimental study on domestic pigs

Background/Aim. Flapless implant surgery has become very important issue during recent years, mostly thanks to computerization of dentistry and software planning of dental implants placements. The aim of this study was to compare flap and flapless surgical techniques for implant placement through radiographic and radiofrequency analyses. Methods. The experiment was made in five domestic pigs. Nine weeks following domestic pigs teeth extraction, implants were placed, on the right side using surgical technique flap, and flapless on the left side. Digital dental Xrays were applied to determine primary dental implant stability quality (ISQ). At certain intervals, not later than three months, the experimental animals were sacrificed, and just before it, control X-rays were applied to measure dental implants stability. Results. Radiographic analysis showed that peri-implant bone resorption in the first 4 weeks following placement implants with flap and flapless surgical techniques was negligible. After the 3 months, mean value of peri-implant bone resorption of the implants placed using flap technique was 1.86 mm, and of those placed using flapless technique was 1.13 mm. In relation to the primary dental implant stability in the first and second week there was an expected decrease in ISQ values, but it was less expressed in the dental implants placed using the flapless technique. In the third week the ISQ values were increased in the dental implants placed by using both techniques, but the increase in flapless implant placement was higher (7.4 ISQ) than in flap implant placement (1.5 ISQ). The upward trend continued in a 4- week period, and after 3 months the dental implant stability values in the implants placed using flap technique were higher than the primary stability for 7.1 ISQ, and in the implants placed using flapless technique were higher comparing to the primary stability for 10.1 ISQ units. Conclusion. Based on the results of radiographic and resonance frequency analyses it can be concluded that the flapless technique in surgical implants placemat, leads to better results.

Histomorphometric evaluation of implant design as a key factor in peri-implant bone response: a preliminary study in a dog model

AIM

Primary implant stability as the establishment of a direct bone-to-implant contact (BIC) plays a major role in long-term successful implant osseointegration. Numerous factors influencing this initial stability have been studied. This preliminary in vivo study on a dog lower jaw aimed to investigate the hypothesis that primary implant stability in low density bone may be influenced by implant design.

METHODS

The authors compared two different implant designs with regard to their immediate quantitative relation to host bone (BIC% and gap area, GA%). The screw-shaped implants, manufactured by Or-Vit (Castelmaggiore-Bologna, Italy), exhibited similar microroughness surface and two different thread pitches: ''narrow-pitch'' implants (NP) and ''wide-pitch'' implants (WP) with a 0.5 mm and 1.5 mm thread pitch respectively. Implants were placed in dog jaw after complete osseous healing of the extractive sockets, according to a delayed implantation procedure. Five hours after surgery the animal was sacrificed. Radiographic, histological, morphometric and ultrastructural analysis were performed.

RESULTS

An inverse relation existed among the two parameters BIC and GA: GA, as a region with high osteogenetic potentiality, appeared wider in WP implants; BIC, as the expression of primary mechanical stability, was higher in NP implants.

CONCLUSION

Based on this results, we could assume that NP implants might be the clinical choice in case of immediate loading.This single case study might be considered a starting point for further long term in vivo investigations aiming to establish the implant design that best favours osseointegration at different bone quality sites.