Insights into how characteristics of dissolved algal organic matter affect the efficiency of modified clay in controlling harmful algal blooms

Dissolved algal organic matter (dAOM) originating from harmful algal blooms (HABs) can deteriorate the quality of municipal water supplies, threaten the health of aquatic environments, and interfere with modified clay (MC)-based HABs control measures. In this study, we explored the composition of dAOM from Prorocentrum donghaiense, a typical HAB organism, and assessed the influence of dAOM on MC flocculation. Our results suggested that dAOM composition was complex and had a wide molecular weight (MW) distribution. MW and electrical properties were important dAOM characteristics affecting flocculation and algal removal efficiency of MC. Negatively charged high-MW components (>50 kDa) critically affected algal removal efficiency, reducing the zeta potential of MC particles and leading to small and weak flocs. However, the effect of dAOM depended on its concentration. When the cell density of P. donghaiense reached HAB levels, the high-MW dAOM strongly decreased the algal removal efficiency of MC.

High-Efficiency Single-Cell Electrical Impedance Spectroscopy

Single-cell impedance measurement is label free and noninvasive in characterizing the electrical properties of single cells. At present, though widely used for impedance measurement, electrical impedance flow cytometry (IFC) and electrical impedance spectroscopy (EIS) are used alone for most microfluidic chips. Here, we describe high-efficiency single-cell electrical impedance spectroscopy, which combines in one chip the IFC and EIS techniques for high-efficiency single-cell electrical property measurement. We envision that the strategy of combining IFC and EIS provides a new thought in the efforts to enhance the efficiency of electrical property measurement for single cells.

Piezoelectric characteristics of PVA/DL-alanine polycrystals in d33 mode

In this study, polyvinyl alcohol (PVA)-mixed DL-alanine (PVA/DL-alanine) polycrystals are fabricated, and their piezoelectric characteristics in the d₃₃ mode are investigated. The d₃₃ piezoelectric coefficients of the PVA/DL-alanine polycrystals are found to increase with an increase in the weight ratio of DL-alanine, and the PVA/DL-alanine polycrystal composed of PVA and DL-alanine in a weight ratio of 1:3 exhibits a d₃₃ of ∼5 pC/N. The piezoelectric characteristics of the PVA/DL-alanine polycrystals are discussed in terms of the crystal structure by employing scanning electron microscopy and X-ray diffraction analyses. To confirm the piezoelectric performance of the polycrystals, the piezoelectric voltages of a piezoelectric device composed of a single layer of ZnO thin film and heterostructured devices consisting of a layer of PVA/DL-alanine polycrystal and a ZnO thin film layer are measured and compared. This study presents PVA/DL-alanine polycrystals as a potential piezoelectric material for bio-friendly piezoelectric-device applications.

Strategic fabrication of efficient photo-responsive semiconductor electronic diode-devices by Bovine Serum Albumin protein-based Cu(II)-metallohydrogel scaffolds

Bovine Serum Albumin protein-based two fascinating functional self-healing Cu(II) metallohydrogel scaffolds (MD1 and MD2) have been studied for the development of metal-semiconductor junction based Schottky diode device. Multiple metal-semiconductor (MS) junction devices, offering the sandwich-like configuration of Indium tin oxide (ITO)/ metallogel/Aluminium (Al), have been made-up to investigate the electrical properties of the synthesized metallohydrogel materials. Optical characterizations including optical band gap measurement have been carried out using Tauc's equation for both the metallohydrogels. The current-voltage (I-V) characteristics of just made-up devices are studied under irradiation and non- irradiation conditions to explore the electrical features through investigating the charge transport phenomenon. The electrical conductivity gets estimated as 3.13 × 10^-5 S.m^-1 and 2.69 × 10^-5 S.m^-1 for MD1 and MD2 under dark condition, and 11.06 × 10^-5 S.m^-1 and 5.99 × 10^-5 S.m^-1 for MD1 and MD2, respectively, in photo-irradiation. The measured optical and electrical properties of MD1 and MD2 metallohydrogels are thoroughly investigated and the data indicates that MD1 and MD2 metallohyrogels are semiconducting in nature with excellent photo-responsive behaviour. Moreover, the representative I - V characteristic of the MD1 and MD2 metallohydrogels at both irradiation and non-irradiation conditions represents the nonlinear rectifying behaviour, a typical signature for Schottky diode (SD).

Design of Mechanical and Electrical Properties for Multidirectional Control of Microtubules

Microtubule (MT)-motor systems show promise as nanoscale actuator platforms for performing molecular manipulations in nanobiotechnology and micro total analysis systems. These systems have been demonstrated to exert a variety of functions, including the concentration, transportation, and detection of molecular cargos. Although gliding direction control of MTs is necessary for these applications, most direction control methods are currently conducted using micro/nanofabricated guiding structures and/or flow, magnetic, and electric field forces. These control methods force all MTs to exhibit identical gliding behaviors and destinations. In this chapter, we describe an active multidirectional control method for MT without guiding tracks. The bottom-up molecular design allowed MTs to be guided in designated directions under an electric field in a microfluidic device. By designing the stiffness and surface charge density of MTs, three types of MT (Stiff-MT, Soft-MT, and Charged soft-MT) with different mechanical and electrical properties are prepared. The gliding directions within an electric field are predicted according to the measured stiffness and electrophoretic mobility. Finally, the Stiff-MTs are separated from Soft-MTs and Charged soft-MTs with a microfluidic sorter.

Thermoelectric degrees of freedom determining thermoelectric efficiency

For over half a century, the development of thermoelectric materials has based on the dimensionless figure of merit zT, assuming that the efficiency is mainly determined by this single parameter. Here, we show that the thermoelectric conversion efficiency is determined by three independent parameters, Zgen, τ, and β, which we call the three thermoelectric degrees of freedom (DoFs). Zgen is the well-defined mean of the traditional zT under nonzero temperature differences. The two additional parameters τ and β are gradients of material properties and crucial to evaluating the heat current altered by nonzero Thomson heat and asymmetric Joule heat escape. Each parameter is a figure of merit. Therefore, increasing one of the three DoFs leads to higher efficiency. Our finding explains why the single-parameter theory is inaccurate. Further, it suggests an alternative direction in material discovery and device design in thermoelectrics, such as high τ and β, beyond zT.

•

General efficiency theory of thermoelectric conversion is derived for T-dependent properties

•

Three degrees of freedom Z_gen, τ, and β determine thermoelectric efficiency

•

Efficiency can vary up to approximately 40% with τ and β

•

Each degree of freedom is a figure of merit

Sandblasting improves the performance of electrodes of miniature electrical impedance tomography via double layer capacitance

Effect of sandblasting of the copper electrode structures before deposition of gold thin film for micro electrical impedance tomography (EIT) system has been studied experimentally. The comparison has been performed on the unmodified copper electrodes and the sandblasted electrodes before deposition of gold layer, using structural analysis while their performance in EIT system has been measured and analyzed. The results of scanning electron microscopy and atomic force microscopy show that the sandblasting of the electrodes results in the deposition of gold film with smaller grain size and uniformly, comparing to the unmodified structure. The measurement of impedance shows that the sandblasting will increase the double layer capacitance of electrode structure which improves the impedance measurement accordingly.

Impact of sonochemical synthesis condition on the structural and physical properties of MnFe2O4 spinel ferrite nanoparticles

Herein, we report sonochemical synthesis of MnFe₂O₄ spinel ferrite nanoparticles using UZ SONOPULS HD 2070 Ultrasonic homogenizer (frequency: 20 kHz and power: 70 W). The sonication time and percentage amplitude of ultrasonic power input cause appreciable changes in the structural, cation distribution and physical properties of MnFe₂O₄ nanoparticles. The average crystallite size of synthesized MnFe₂O₄ nanoparticles was increased with increase of sonication time and percentage amplitude of ultrasonic power input. The occupational formula by X-ray photoelectron spectroscopy for prepared spinel ferrite nanoparticles was (Mn_0.29Fe_0.42)[Mn_0.71Fe_1.58]O₄ and (Mn_0.28Fe_0.54) [Mn_0.72Fe_1.46]O₄ at sonication time 20 min and 80 min, respectively. The value of the saturation magnetization was increased from 1.9 emu/g to 52.5 emu/g with increase of sonication time 20 min to 80 min at constant 50% amplitude of ultrasonic power input, whereas, it was increased from 30.2 emu/g to 59.4 emu/g with increase of the percentage amplitude of ultrasonic power input at constant sonication time 60 min. The highest value of dielectric constant (ε') was 499 at 1 kHz for nanoparticles at sonication time 20 min, whereas, ac conductivity was 368 × 10^-9 S/cm at 1 kHz for spinel ferrite nanoparticles at sonication time 20 min. The demonstrated controllable physical characteristics over sonication time and percentage amplitude of ultrasonic power input are a key step to design spinel ferrite material of desired properties for specific application. The investigation of microwave operating frequency suggest that these prepared spinel ferrite nanoparticles are potential candidate for fabrication of devices at high frequency applications.

Corona discharge characteristics of cylindrical electrodes in a two-stage electrostatic precipitator

Electrostatic precipitator (ESP) is an electrohydrodynamic-based air filter that charges particles based on corona discharge and collects particles by induced electrostatic forces. Inducing corona discharge requires strong electric fields that, however, bring reliability issues because of oxidation. This paper presents the characteristics of an ESP that uses the cylindrical corona electrodes whose longitudinal axis is perpendicular to the surface of the ground electrode. The characteristics include the current-voltage curve, the surface oxidation of the cylindrical corona electrodes, and the element analysis. The characteristics are presented with respect to the pitch and diameter of the cylindrical corona electrodes. The results show that the characteristics mentioned above can correlate to the electric fields around the cylindrical corona electrodes. Stronger electric field around the cylindrical corona electrode results in higher collection efficiency, more oxidation on the cylindrical corona electrode, and shorter life of the cylindrical corona electrode.

Enhancement effect on antibacterial property of gray titania coating by plasma-sprayed hydroxyapatite-amino acid complexes during irradiation with visible light

The aim of this study was to reveal the mechanism of enhancement of antibacterial properties of gray titania by plasma-sprayed hydroxyapatite (HAp)-amino acid fluorescent complexes under irradiation with visible light. Although visible-light-sensitive photocatalysts are applied safely to oral cavities, their efficacy is not high because of the low energy of irradiating light. This study proposed a composite coating containing HAp and gray titania. HAp itself functioned as bacteria catchers and gray titania released antibacterial radicals by visible-light irradiation. HAp-amino acid fluorescent complexes were formed on the surface of the composite coating in order to increase light intensity to gray titania by fluorescence, based on an idea bioinspired by deep-sea fluorescent coral reefs. A cytotoxicity assay on murine osteoblastlike cells revealed that biocompatibility of the HAp-amino acid fluorescent complexes was identical with the that of HAp. Antibacterial assays involving Escherichia coli showed that the three types of HAp-amino acid fluorescent complexes and irradiation with three types of light-emitting diodes (blue, green, and red) significantly decreased colony-forming units. Furthermore, kelvin probe force microscopy revealed that the HAp-amino acid fluorescent complexes preserved the surface potentials even after irradiation with visible light, whereas those of HAp were significantly decreased by the irradiation. Such a preservative effect of the HAp-amino acid fluorescent complexes maintained the bacterial-adhesion performance of HAp and consequently enhanced the antibacterial action of gray titania.

Mercerization effect on structure and electrical properties of cellulose: Development of a novel fast Na-ionic conductor

Mercerized cellulose (alkali cellulose C₆H₁₀O₅* NaOH) was obtained by treatment of cotton linters (cellulose) with aqueous sodium hydroxide. Cellulose and alkali-cellulose samples with relative density of 78% and 79% were obtained after sintering the material in air at optimal sintering temperatures of 423 K and 473 K, respectively. The electrical properties of the samples were studied by impedance spectroscopy in the frequency range from 13 MHz to 50 Hz at temperatures between 393 K and 493 K. The influence of cellulose mercerization on electrical properties of cotton linters was observed. The cellulose behaves like an electrical insulator. Contrariwise, the alkali-cellulose is a fast-ionic conductor with a conductivity value of σ_{473 K} = 3.22 × 10^-6 S cm^-1 having activation energies of 0.49 eV and 0.68 eV at temperature range of 393 K-458 K and 459 K-500 K, respectively. The change of activation energy value has been discussed in relation to thermal stability.

Structure and Dielectric Property of High-k ZrO2 Films Grown by Atomic Layer Deposition Using Tetrakis(Dimethylamido)Zirconium and Ozone

High-k metal oxide films are vital for the future development of microelectronics technology. In this work, ZrO₂ films were grown on silicon by atomic layer deposition (ALD) using tetrakis(dimethylamido)zirconium and ozone as precursors. The relatively constant deposition rate of 0.125 nm/cycle is obtained within the ALD temperature window of 200-250 °C. The film thickness can be precisely controlled by regulating the number of ALD cycle. The ZrO₂ films formed at 200-250 °C have an O/Zr atomic ratio of 1.85-1.9 and a low content of carbon impurity. ZrO₂ film begins to crystallize in ALD process above 210 °C, and the crystal structure is changed from cubic and orthorhombic phases to monoclinic and orthorhombic phases with increasing the deposition temperature to 350 °C. Moreover, the effect of annealing temperature on dielectric properties of ZrO₂ film was studied utilizing ZrO₂-based MIS device. The growth of the interface layer between ZrO₂ and Si substrate leads to the decrease in the capacitance and the leakage current of dielectric layer in the MIS device after 1000 °C annealing. ZrO₂ film exhibits the relatively high dielectric constant of 32.57 at 100 kHz and the low leakage current density of 3.3 × 10^-6 A cm^-2 at 1 MV/cm.

Effect of Composition, Interface, and Deposition Sequence on Electrical Properties of Nanolayered Ta2O5-Al2O3 Films Grown on Silicon by Atomic Layer Deposition

Nanolayered Ta₂O₅-Al₂O₃ composite films were grown on n-type silicon by atomic layer deposition (ALD) within the overlapped ALD window of 220-270 °C. Moreover, post-annealing treatment was carried out to eliminate defects and improve film quality. Nanolayered Ta₂O₅-Al₂O₃ composite films remain amorphous after 700 °C annealing. The effects of composition, interface, and deposition sequence on electrical properties of Ta₂O₅-Al₂O₃ composite films were investigated in detail utilizing MIS devices. The results demonstrate that the formation of Ta₂O₅-Al₂O₃ composite films by mixing Al₂O₃ into Ta₂O₅ can decrease the leakage current effectively, but it leads to the decrease of the dielectric constant and the enhancement of the hysteresis effect. The interfaces in composite films are not conducive to prevent the leakage current. The deposition sequence of Si/(Al₂O₃/Ta₂O₅)_n, Al₂O₃ as the first covering layer, reduces the leakage current and the hysteresis effect effectively. Therefore, the electrical properties of Ta₂O₅-Al₂O₃ composite films could be regulated by adjusting components and structures via ALD to acquire relatively great dielectric constants and acceptable leakage currents.

Effects of Annealing Ambient on the Characteristics of LaAlO3 Films Grown by Atomic Layer Deposition

We investigated the effects of different annealing ambients on the physical and electrical properties of LaAlO₃ films grown by atomic layer deposition. Post-grown rapid thermal annealing (RTA) was carried out at 600 °C for 1 min in vacuum, N₂, and O₂, respectively. It was found that the chemical bonding states at the interfacial layers (ILs) between LaAlO₃ films and Si substrate were affected by the different annealing ambients. The formation of IL was enhanced during the RTA process, resulting in the decrease of accumulation capacitance, especially in O₂ ambient. Furthermore, based on the capacitance-voltage characteristics of LaAlO₃/Si MIS capacitors, positive V _FB shifting tendency could be observed, indicating the decrease of positive oxide charges. Meanwhile, both trapped charge density and interface trap density showed decreased trends after annealing treatments. In addition, RTA process in various gaseous ambients can reduce the gate leakage current due to the enhancement of valence band offset and the reduction of defects in the LaAlO₃/Si structure in varying degrees.

The role of the collaborative functions of the composite structure of organic and inorganic constituents and their influence on the electrical properties of human bone

BACKGROUND

The electrical potential, which is generated in bone by collagen displacement, has been well documented. However, the role of mineral crystals in bone piezoelectricity has not yet been elucidated.

OBJECTIVE

We examined the mechanism that the composite structure of organic and inorganic constituents and their collaborative functions play an important role in the electrical properties of human bone.

METHODS

The electrical potential and bone structure were evaluated using thermally stimulated depolarized current (TSDC) and micro computed tomography, respectively. After electrical polarization of bone specimens, the stored electrical charge was calculated using TSDC measurements. The CO3/PO4 peak ratio was calculated using attenuated total reflection to compare the content of carbonate ion in the bone specimens.

RESULTS

The TSDC curve contained 3 peaks at 100, 300 and 500°C, which were classified into 4 patterns. The CO3/PO4 peak ratio positively correlated with the stored charges at approximately 300°C in the polarized bone. There was a positive correlation between the stored bone charge and the bone mineral density only.

CONCLUSIONS

It is suggested that the peak at 300°C is attributed to carbonate apatite and the total bone mass of human bone, not the three-dimensional structure, affects the stored charge.

Te inclusion-induced electrical field perturbation in CdZnTe single crystals revealed by Kelvin probe force microscopy

To understand the effects of tellurium (Te) inclusions on the device performance of CdZnTe radiation detectors, the perturbation of the electrical field in and around Te inclusions was studied in CdZnTe single crystals via Kelvin probe force microscopy (KPFM). Te inclusions were proved to act as lower potential centers with respect to surrounding CdZnTe matrix. Based on the KPFM results, the energy band diagram at the Te/CdZnTe interface was established, and the bias-dependent effects of Te inclusion on carrier transportation is discussed.

Graphene functionalized with poly(vinyl alcohol) as a Pickering stabilizer for suspension polymerization of poly(methyl methacrylate)

Two types of thermally reduced graphenes (TRGs) having different lateral sizes were non-covalently modified with poly(vinyl alcohol) to endow water-dispersibility. The modified TRGs were examined as Pickering stabilizers for the suspension polymerization of methyl methacrylate (MMA). They were effective graphene-based Pickering stabilizers for the system with almost all of the polymerized composite microparticles having a regular spherical shape. The particle size of the composite microparticles was tunable by the size or the amount of modified TRG used as stabilizer. The almost perfect core-shell structure of the composite microparticles effectively enhanced the thermal stability of the core PMMA. In addition, when the core-shell microparticles were compression molded into a monolith, the obtained composite exhibited an ultra-low percolation threshold of electrical conductivity of around 0.04vol%.