Enhanced Electrochemical CO2 Reduction to Formate on Poly(4-vinylpyridine)-Modified Copper and Gold Electrodes

Developing active and selective catalysts that convert CO₂ into valuable products remains a critical challenge for further application of the electrochemical CO₂ reduction reaction (CO₂RR). Catalytic tuning with organic additives/films has emerged as a promising strategy to tune CO₂RR activity and selectivity. Herein, we report a facile method to significantly change CO₂RR selectivity and activity of copper and gold electrodes. We found improved selectivity toward HCOOH at low overpotentials on both polycrystalline Cu and Au electrodes after chemical modification with a poly(4-vinylpyridine) (P4VP) layer. In situ attenuated total reflection surface-enhanced infrared reflection-adsorption spectroscopy and contact angle measurements indicate that the hydrophobic nature of the P4VP layer limits mass transport of HCO₃^- and H₂O, whereas it has little influence on CO₂ mass transport. Moreover, the early onset of HCOOH formation and the enhanced formation of HCOOH over CO suggest that P4VP modification promotes a surface hydride mechanism for HCOOH formation on both electrodes.

Treated activated carbon as a metal-free catalyst for effectively catalytic reduction of toxic hexavalent chromium

In this work, activated carbon treated in N₂ atmosphere, as a non-metallic catalyst, exhibits excellent catalytic performance in reduction of Cr (VI) to Cr (III) using HCOOH as the reducing agent at room temperature. A series of characterizations and control experiments were carried out to deduce the possible reaction mechanism. The results showed that the improved catalytic performance can be attributed to the enhanced graphitization degree and basic sites such as pyrone-like, which favor electron transferring and activation of reactant. The reaction rate constant observed herein for the C-800 was 22 and 6 times more than that for C-0 and Pd/C catalyst, respectively. In addition, C-800 showed good recycle performance, and no loss of activity was observed after 5 cycles. This study broadens the application of nonmetallic catalyst and provides an easy-available and cost-effective catalytic material for removing toxic Cr (VI).

Highly selective electrocatalytic reduction of CO2 to HCOOH over an in situ derived hydrocerussite thin film on a Pb substrate

A metal oxide electrode has been developed for the electrochemical CO₂ reduction reaction (eCO₂RR). It exhibits superior activity and product selectivity towards eCO₂RR by circumventing the previously encountered problem of self-reduction with high-valence metals. Specifically, a hydrocerussite [Pb₃(CO₃)₂(OH)₂] thin film has been synthesized in situ on a Pb substrate (denoted as ER-HC) by an electroreduction method using a lead-based metal-organic framework (Pb-MOF) as a precursor. The ER-HC electrode exhibits a high selectivity of 96.8% towards HCOOH production with a partial current density of 1.9 mA cm^-2 at -0.88 V vs. the reversible hydrogen electrode (RHE). A higher HCOOH partial current density of 7.3 mA cm^-2 has been achieved at -0.98 V vs. RHE. Physicochemical and electrochemical characterization results demonstrate that the defective hydrocerussite surface exhibits appropriate adsorption free energy of formate (HCOO^-) and a lower reaction free energy for HCOOH production from CO₂, which greatly boosts the eCO₂RR activity and HCOOH production selectivity. The structure and eCO₂RR performance of the hydrocerussite thin film remain stable in 0.1 M KHCO₃ as electrolyte, ensuring its durability. Overall, this work not only provides a metal oxide electrode (metal hydroxide, to be more precise) with excellent eCO₂RR performance, but also expands the in situ electrochemical derivatization strategy for the fabrication of metal oxide electrodes.

Polymeric carbon nitride supported Bi nanoparticles as highly efficient CO2 reduction electrocatalyst in a wide potential range

It is still a great challenge to develop electrocatalysts for CO₂ reduction with high product selectivity and energy conversion efficiency. In this work, Bi nanoparticles supported on polymeric carbon nitride (Bi/CN) have been prepared for CO₂ electrocatalytic conversion. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) analyses confirm the existence of Bi₂O₃ on Bi particle surface, forming Bi/Bi₂O₃ nanoparticles. CN, as the support, has been found not only to improve the dispersibility of Bi/Bi₂O₃ nanoparticles, but also to enhance the CO₂ adsorption on Bi/CN surface owing to the existence of amino and cyano groups. The electronic structure of Bi/CN has been optimized by the interaction between CN and Bi: the electron transfer from Bi to CN results in electron-deficient Bi sites which stabilize CO₂^-, HCOO^- intermediates and accelerate the formation rate of HCOOH. As a result, the maximum Faradaic efficiency of HCOOH reaches 98% at -1.3 to -1.5 V versus reversible hydrogen electrode (vs. RHE) and remains over 91% in a wide potential window of about 500 mV (-1.1 ∼ -1.6 V vs. RHE). The as-obtained Bi/CN in this work shows superior performance to most of the previously reported Bi-based electrocatalysts.

Electrochemical Reduction of CO2 to HCOOH over Copper Catalysts

Although great progress has been made in the field of electrochemical CO₂ reduction reaction (eCO₂RR), inducing product selectivity is still difficult. We herein report that a thiocyanate ion (SCN^-) switched the product selectivity of copper catalysts for eCO₂RR in an H-cell. A cuprous thiocyanate-derived Cu catalyst was found to exhibit excellent HCOOH selectivity (faradaic efficiency = 70-88%) over a wide potential range (-0.66 to -0.95 V vs RHE). Furthermore, it was revealed that the formation of CO and C₂H₄ over commercial copper electrodes could be dramatically suppressed with the presence of SCN^-, switching to HCOOH. Density functional theory calculations disclosed that SCN^- made the formation of HCOO* easier than COOH* on Cu (211), facilitating the HCOOH generation. Our results provide a new insight into eCO₂RR and will be helpful in the development of cheap electrocatalysts for specific utilization.

Hydrogen sulfide delays GA-triggered programmed cell death in wheat aleurone layers by the modulation of glutathione homeostasis and heme oxygenase-1 expression

Hydrogen sulfide (H2S) is considered as a cellular signaling intermediate in higher plants, but corresponding molecular mechanisms and signal transduction pathways in plant biology are still limited. In the present study, a combination of pharmacological and biochemical approaches was used to study the effect of H2S on the alleviation of GA-induced programmed cell death (PCD) in wheat aleurone cells. The results showed that in contrast with the responses of ABA, GA brought about a gradual decrease of l-cysteine desulfhydrase (LCD) activity and H2S production, and thereafter PCD occurred. Exogenous H2S donor sodium hydrosulfide (NaHS) not only effectively blocked the decrease of endogenous H2S release, but also alleviated GA-triggered PCD in wheat aleurone cells. These responses were sensitive to hypotaurine (HT), a H2S scavenger, suggesting that this effect of NaHS was in an H2S-dependent fashion. Further experiment confirmed that H2S, rather than other sodium- or sulphur-containing compounds derived from the decomposing of NaHS, was attributed to the rescuing response. Importantly, the reversing effect was associated with glutathione (GSH) because the NaHS triggered increases of endogenous GSH content and the ratio of GSH/oxidized GSH (GSSG) in GA-treated layers, and the NaHS-mediated alleviation of PCD was markedly eliminated by l-buthionine-sulfoximine (BSO, a selective inhibitor of GSH biosynthesis). The inducible effect of NaHS was also ascribed to the modulation of heme oxygenase-1 (HO-1), because the specific inhibitor of HO-1 zinc protoporphyrin IX (ZnPP) significantly suppressed the NaHS-related responses. By contrast, the above inhibitory effects were reversed partially when carbon monoxide (CO) aqueous solution or bilirubin (BR), two of the by-products of HO-1, was added, respectively. NaHS-triggered HO-1 gene expression in GA-treated layers was also confirmed. Together, the above results clearly suggested that the H2S-delayed PCD in GA-treated wheat aleurone cells was associated with the modulation of GSH homeostasis and HO-1 gene expression.