Evaporation-driven interfacial restructuring induces highly efficient methanogenesis of waste biomass

Methanogenesis of waste biomass (WB) is a promising method for global sustainable development, reduction of pollution and carbon emission levels, and recovering bioenergy. Unlike in the methanogenesis of organic wastewater, in which microbial cells come into direct contact with the dissolved substrate, the 'solid-liquid-solid' modes in WB and between WB and microbial cells, which involve numerous solid-liquid interfaces, greatly hinder the methanogenesis efficiency of WB. Amongst all WB, waste activated sludge is the most complex, poorly biodegradable and representative. Herein, we highlight the role of water evaporation-driven solid-liquid interfacial restructuring of sludge in determining its methanogenesis efficiency. Non-free water evaporation increased surface roughness and adhesion, and compressed pore structure with numerous capillaries in sludge, resulting in a new solid-liquid interface of sludge with great capillary force and highly ordered interfacial water molecules, which provides an extremely favourable condition for high mass transfer and proton-coupled electron transfer (PCET) in sludge. This restructuring was confirmed to induce the enhancement of solid-liquid interfacial noncovalent interactions and electron transfer efficiency in the subsequent methanogenesis process (P < 0.05), promoting the effective contact between the sludge substrate and microbial cells, thereby enriching the methanogenic consortia (i.e., Clostridia and Methanosarcina were increased by 290.0 % and 239.7 %, respectively) and improving the activities of key enzymes. Stable isotope tracing and metagenomic analysis further reveal that this restructuring promoted the participation of water molecules in the methane formation by PCET-driven release of protons from water, and enhanced main methanogenesis metabolic pathways, especially the metabolic pathway of CO2-reduction methanogenesis (+65.2 %), thereby resulting in a great advance in methane generation (+147 %, P < 0.001). The findings can provide a reference for regulating directional anaerobic biotransformation of water-rich multiphase complex substrates by interfacial restructuring inducement.

Improving the emulsifying capacity of brewers' spent grain arabinoxylan by carboxymethylation

Arabinoxylan derived from brewers' spent grain was carboxymethylated, and the emulsifying capacity of carboxymethylated arabinoxylans (CMAX) with different degrees of substitution (DS) was investigated. Results showed that carboxymethylation greatly enhanced the emulsifying capacity and emulsion stability of CMAX compared to the initial arabinoxylan. CMAX developed decreased ζ-potential, higher hydrophilicity, and improved interfacial adsorption capacity. Consequently, the denser and stronger interface on the oil droplet was formed, and the stabilizing mechanism was altered. Moreover, CMAX with lower DS could effectively stabilize emulsions during storage at a concentration of 0.5 % and pH between 6 and 7. Higher DS, however, led to poorer emulsion stability and greater flocculation as a result of the fragile interface formed by excess intermolecular ionic force. The research found CMAX potential in emulsion stabilizing and further applications in food processing.

Water-soluble fraction of pea protein isolate is critical for the functionality of protein-glucose conjugates obtained via wet-heating Maillard reaction

Wet-heating Maillard reaction (MR) has been applied to improve the function of proteins by conjugating with soluble carbohydrates. However, the impact of soluble solutes particularly in plant protein on the degree of MR and the properties of the corresponding conjugates has yet to be discussed. In this study, high-intensity ultrasound (HIUS) was utilized to pretreat commercial pea protein isolate in order to improve its solubility. Two different fractions including soluble fraction (SUPPI) and whole solution (UPPI) of HIUS treated PPI were conjugated with glucose (G) to prepare SUPPI-G and UPPI-G, respectively, over a course of 24 h wet-heating at 80 °C. Conjugation was confirmed by the degree of glycation, SDS-PAGE, FTIR, and intrinsic fluorescence analysis. Color change and glucose content analysis showed that the degree of MR was greater when using SUPPI rather than UPPI. The solubility of SUPPI-G was further improved by 24 h of MR while it remained unchanged for UPPI-G. The emulsifying activity index and foaming capability of SUPPI-G were similar to those of UPPI-G. Interfacial properties determined by dynamic adsorption and dilatational rheology at both oil-water and air-water interface suggested that insoluble fraction of UPPI is essential to make stable emulsions and foams. In conclusion, the proportion of soluble protein in PPI is critical to its wet-heating MR based conjugation with glucose and the solubility of the conjugates.

Characterization of interfacial property of a two-layered plate using a nonlinear low-frequency Lamb wave approach

This work investigates the feasibility of using a nonlinear low-frequency Lamb wave approach for characterizing the interfacial property of a two-layered plate. Compared with the case of the exact phase-velocity matching, the approximate phase-velocity matching in the low-frequency region can still guarantee the cumulative second-harmonic generation (SHG) of primary Lamb wave propagation, which overcomes the drawbacks arising from the inherent dispersion and multimode features of Lamb wave propagation. For a given two-layered plate, the appropriate mode pair at low frequency consisting of primary Lamb wave and double-frequency Lamb wave (DFLW), which satisfies the approximate phase-velocity matching and nonzero energy flux, is selected to ensure that the amplitude of the generated second harmonic grows within the maximum cumulative distance (MCD). Meanwhile, the numerical analyses indicate that the variation of the SHG efficiency is maximized at the MCD during the interfacial degradation. Using the nonlinear ultrasonic measurement-based experimental setup, the time-domain signal of the second harmonic generated at different propagation distances is conveniently extracted, and then the relative nonlinear acoustic parameter curve consistent with the theoretical prediction is obtained. For examining the influence of interfacial property on the SHG effect of low-frequency Lamb wave propagation, the different annealing cycles of the thin adhesive layer (acrylics) are used to simulate minor changes in the interfacial property of the given two-layered plate. It is found that the relative nonlinear acoustic parameter at the MCD decreases monotonically and sensitively with the increment of annealing cycle number, which verifies the quantitative correlation between the SHG efficiency of low-frequency Lamb wave propagation and the degree of the interfacial degradation. The consistency between the numerical analysis and the experimental measurement shows the potential of using the SHG effect of low-frequency Lamb wave propagation to characterize a minor change in the interfacial properties of a layered composite plate.

Emulsifying capacity of peanut polysaccharide: Improving interfacial property through the co-dissolution of protein during extraction

The co-dissolution of residual protein from byproduct (PPSI) was employed to improve the interfacial property of peanut polysaccharide (PPS). Protein content in the PPSI and PPS were 16.89% and 2.58%, respectively. The convent bonding and intermolecular interaction maintained the complex structure in PPSI. More protein promoted the shift from linear chain conformation to spherical particle, weakened surface charge, induced stronger intermolecular attraction and wettability, which facilitated interfacial adsorption of PPSI. Concomitantly, the linear chain after adsorbing the O/W interface was observed in PPSI-polystyrene, promoting the cross-linking between adsorption layers and thereby forming the elastic interfacial film. Consequently, the emulsion borne smaller size. Subsequently, the particles in continuous phase moved to the adsorption layer via intermolecular interaction and then formed a gel, enhancing stability against oil coalescence, the thermal and refrigerated treatments. Additionally, the acidified (pH 3.0) PPSI further strengthened the emulsion structure and improved its creaming and freeze-thaw stability.

Modeling and simulation of static component generation of Lamb wave propagation in a layered plate

Modeling of the acoustic-radiation-induced static component (SC) generation of primary Lamb wave tone burst propagating in a layered plate is conducted. Accompanying the propagation of primary Lamb wave tone burst, there are the finite-duration SC bulk driving force in the interior of the layered plate, and the finite-duration SC traction stress on each surface/interface. According to the modal analysis approach for waveguide excitation, the function of the finite-duration SC bulk driving force and traction stress is to generate the finite-duration SC of primary Lamb wave tone burst. Compared with the second harmonic (SH) generation of Lamb wave propagation in a layered plate, the phase velocity matching is no longer required for the generation of the SC with a cumulative growth effect. Based on modeling of the finite-duration SC generation, it is found that the integrated amplitude of the finite-duration SC generated by propagation of the primary Lamb wave tone burst does grow with propagation distance. Meanwhile, the numerical analyses and the finite element (FE) simulations are conducted to investigate the effect of the said SC generation. It is found that, although the interfacial layer of the layered plate considered is quite thin compared with the upper and lower layers, the numerical analyses indicate that the influence of the interfacial property on the cumulative growth effect of the SC of primary Lamb wave is significant. Furthermore, the FE simulations demonstrate that the cumulative SC of primary Lamb wave tone burst will exhibit a monotonic and sensitive response to the degree of interfacial degradation. This investigation provides an physical insight not previously available into the process of the SC generation of Lamb wave propagation in a layered plate.

Citrus pectin modified by microfluidization and ultrasonication: Improved emulsifying and encapsulation properties

In this study, modified citrus pectin treated with a combination of microfluidization and ultrasonication was compared to the original and ultrasonication treated pectin on hydrodynamic diameter, molecular weight, polydispersity, zeta potential, apparent viscosity, Fourier-transform infrared spectroscopy (FTIR), 2,2-diphenyl-1-picryl hydrazyl (DPPH) radical scavenging capacity, scanning electron microscope (SEM), atomic force microscopy (AFM), their emulsifying properties and encapsulation properties. Modified pectin treated with a combination of microfluidization and moderate ultrasonication (MUB) was found to have lowest hydrodynamic diameter (418 nm), molecular weight (237.69 kDa) and polydispersity (0.12), and relatively low apparent viscosity among all pectin samples. Furthermore, it showed significantly higher DPPH radical scavenging capacity than the original pectin although only slightly higher than that of ultrasonication treated one (UB). MUB showed a thin fibrous morphology and decreased degree of branching from SEM and AFM. Emulsion stabilized by MUB had highest centrifugal and thermal stability compared to emulsions stabilized by UB and the original pectin. This could be attributed to higher interfacial loading of MUB (17.90 mg/m²) forming more compact interfacial layer observed by confocal laser scanning microscopy (CLSM). Moreover, both MUB and UB exhibited improved encapsulation functionality to protect cholecalciferol (vitamin D₃) from UV degradation compared to the original pectin.

What dominates the interfacial properties of extended surfactants: Amphipathicity or surfactant shape?

HYPOTHESIS

The properties of conventional surfactants (c-surfactants) are generally accepted to be amphipathicity-dominated, but extended surfactants (e-surfactants) are additionally polypropylene oxide (PPO)-dependent; this additional property makes us wonder how an intramolecular PPO spacer would be "extended" at various interfaces and what is responsible for the excellent all-round properties of e-surfactants.

EXPERIMENTS

A series of novel sodium medium alkyl chain PPO-b-PEO sulfates (2-ethylhexyl polypropylene oxide-block-polyethylene oxide sulfates, C₈P_pE_eS) were designed, synthesized and structurally identified. Tensiometry was applied to estimate the surfactant shape at the air/water surface. Surface tension, interfacial tension, emulsifying power, electrolyte tolerance, adsorption onto oil sands and thermal hydrolysis stability were measured to evaluate the effect of the PPO coil on the interfacial and micellar properties of the e-surfactants.

FINDINGS

On the basis of obtaining greater values for e-surfactants than c-surfactants for both surface area (a_m) per surfactant molecule and the corresponding shape factor (S), we were surprised to find that e-surfactants form a rugby ball shape not only at the air/water surface but also at the oil/water interface; this result is potentially explained by the PPO spacer coiling and collapsing to produce dense packing at the monolayer adsorption, which is rationally borrowed by other interfaces. Many positive or negative correlations were observed between the interfacial/micellar properties of C₈P_pE_eS and a_m values, which seems that the surfactant shape dominants the properties of the e-surfactants. In fact, the properties of C₈P_pE_eS are dominated by the dynamic amphipathicity and assisted by the rugby ball shape of the molecules because of both being driven by the dynamic biphasic affinity of the PPO coil in response to the external environment; these findings provide soft interfacial materials specially adapted for surfactant flooding.

Cellulose nanofiber induced self-assembly of zinc oxide nanoparticles: Theoretical and experimental study on interfacial interaction

In-depth understanding of interfacial behavior between biopolymer and semiconductor metal oxides is crucial to developing potential applications of their composites. A structure-ordered cellulose/zinc oxide composite was synthesized and systematically examined by a relativistic density functional theory. The prepared composite shows a hierarchical structure. ZnO nanoparticles of around 30 nm in size are found to uniformly grow along the cellulose fiber, which together construct the primary-structure unit. Associated with experimental characterizations, calculations unravel that the electrostatic attraction between cellulose and ZnO is the main driving force to form the primary structure and the subsequent electron transfer from cellulose to ZnO enhances their interfacial interaction; moreover, an exothermic process was computed. The interfacial interaction is mainly contributed by Zn-O_c (O_c denotes the cellulose oxygen atom), which is intrinsically of a dative bond; the interaction was calculated between -1.39 and -1.83 eV in strength and dominated by orbital attractions.

Effects of Annealing Ambient on the Characteristics of LaAlO3 Films Grown by Atomic Layer Deposition

We investigated the effects of different annealing ambients on the physical and electrical properties of LaAlO₃ films grown by atomic layer deposition. Post-grown rapid thermal annealing (RTA) was carried out at 600 °C for 1 min in vacuum, N₂, and O₂, respectively. It was found that the chemical bonding states at the interfacial layers (ILs) between LaAlO₃ films and Si substrate were affected by the different annealing ambients. The formation of IL was enhanced during the RTA process, resulting in the decrease of accumulation capacitance, especially in O₂ ambient. Furthermore, based on the capacitance-voltage characteristics of LaAlO₃/Si MIS capacitors, positive V _FB shifting tendency could be observed, indicating the decrease of positive oxide charges. Meanwhile, both trapped charge density and interface trap density showed decreased trends after annealing treatments. In addition, RTA process in various gaseous ambients can reduce the gate leakage current due to the enhancement of valence band offset and the reduction of defects in the LaAlO₃/Si structure in varying degrees.

Structural and Interfacial Properties of Hyperbranched-Linear Polymer Surfactant

With oleic acid grafting modification, a series of hyperbranched-linear polymer surfactants (HLPS) were prepared by hydroxyl-terminated hyperbranched polymer (HBP), which was gained through a step synthesis method using trimethylolpropane and AB₂ monomer. The AB₂ monomers were obtained through the Michael addition reaction of methyl acrylate and diethanol amine. The structures of HLPS were characterised by Fourier transform infrared spectrophotometer and nuclear magnetic resonance (NMR), which indicated that HBP was successfully modified by oleic acid. Furthermore, the properties of surface tension and critical micelle concentration of HLPS solution showed that HLPS can significantly reduce the surface tension of water. The morphology of the HLPS solution was characterised by dynamic light scattering, which revealed that HLPS exhibited a nonmonotonic appearance in particle size at different scattering angles owing to the different replaced linear portions. The relationships of the surface pressure to monolayer area and time were measured using the Langmuir-Blodgett instrument, which showed that the surface tension of monolayer molecules increased with the increasing of hydrophobic groups. In addition, the interface conditions of different replaced HLPS solutions were simulated.