Continuous valorization of food waste and oily food waste using bacteria-pumice and bacteria-smectite nanocomposites: Alternative cell immobilization and zooplankton lifespan impact

Recycling waste into commercial products is a profitable strategy but the lifetime of immobilized cells for long-term waste treatment remains a problem. This study presents alternative cell immobilization methods for valorizing food waste (FW) and oily food waste (OFW) to microbial carotenoids and proteins. Carriers (pumice or smectite), magnetite nanoparticles, and isolated photosynthetic bacteria were integrated to obtain magnetically recoverable bacteria-pumice and bacteria-smectite nanocomposites. After recycling five batches (50 d), chemical oxygen demand removal from FW reached 76% and 78% with the bacteria-pumice and bacteria-smectite nanocomposite treatments, respectively, and oil degradation in OFW reached 71% and 62%, respectively. Destructive changes did not occur, suggesting the durability of nanocomposites. The used nanocomposites had no impact on the lifespan of Moina macrocopa or water quality as assessed by toxicity analysis. Bacteria-pumice and bacteria-smectite nanocomposites are efficient for food waste recycling and do not require secondary treatment before being discharged into the environment.

Magnetite nanoparticles decorated on cellulose aerogel for p-nitrophenol Fenton degradation: Effects of the active phase loading, cross-linker agent and preparation method

Magnetite nanoparticles (Fe3O4 NPs) are among the most effective Fenton-Like heterogeneous catalysts for degrading environmental contaminants. However, Fe3O4 NPs aggregate easily and have poor dispersion stability because of their magnetic properties, which seriously decrease their catalytic efficiency. In this study, a novel environmentally friendly method for synthesising Fe3O4@CA was proposed. Fe3O4 NPs were immobilized on the 3D cellulose aerogels (CAs) in order to augment the degradation efficiency of p-nitrophenol (PNP) treatment and make the separation of the catalyst accessible by vacuum filtration method. Besides, CAs were fabricated from a cellulose source extracted from water hyacinth by using different cross-linking agents, such as kymene (KM) and polyvinyl alcohol-glutaraldehyde system (PVA-GA), and other drying methods, including vacuum thermal drying and freeze drying, were evaluated in the synthesis process. As-synthesized samples were analysed by various methods, including Powder X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray analysis and Brunauer-Emmett-Teller. Then, using ultraviolet-visible spectroscopy, the difference in the degradability of PNP of the obtained material samples was also investigated to determine their potential applications. Results highlighted that the Fe3O4-3@CA-KF catalyst with an Fe3O4 loading of 0.40 g/gCA used KM as a cross-linker and the freeze-drying method demonstrated the highest PNP removal efficiency (92.5 %) in all Fe3O4@CA samples with a H2O2 content of 5 g/L. The degradation kinetics and well-fitted pseudo-first-order model were investigated. Notably, after five successive PNP degradation experiments, this catalyst retained ∼80 % of the ability to degrade PNP, indicating its outstanding reusability. In environmental remediation, this study provides valuable insights into the development of simply separated and high-efficiency catalysts for heterogeneous catalytic reactions.

Intratumoral thermo-chemotherapeutic alginate hydrogel containing doxorubicin loaded PLGA nanoparticle and heating agent

Chemotherapy has been widely used to treat cancer; however, the non-specific systemic toxicity of chemotherapeutic agents has always been an issue. Local injection treatment is a strategy used to reduce the undesired adverse effects of chemotherapeutic drugs. In addition, chemotherapeutic agents combined with thermotherapy are effective in further enhancing therapeutic potency. In the present study, we prepared an injectable hydrogel, namely, doxorubicin (DOX)-loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticle (DPN) and magnetite nanoparticle (MNP) embedded in alginate hydrogel (DPN/MNP-HG), where DPN and MNP were the chemotherapeutic and heating agents, respectively, for intratumoral thermo-chemotherapy. Injectable DPN/MNP-HG, which possesses solid-like elastic properties, was conveniently prepared via ionic cross-linking at room-temperature. When exposed to an alternating magnetic field (AMF), DPN/MNP-HG exhibited controllable heat generation with a reversible temperature-rise profile. Regarding the kinetics of DOX release, both with and without AMF, DPN/MNP-HG exhibited a slow initial burst and sustained release profile. In cytotoxicity studies and subcutaneous mouse cancer models, successful thermo-chemotherapy with DPN/MNP-HG resulted in significantly lower cell viability and increased tumor-growth suppression; mice also exhibited good tolerance to injected DPN/MNP-HG both with(+) and without AMF application. In conclusion, the proposed thermo-chemotherapeutic DPN/MNP-HG for local intratumoral injection is a promising formulation for cancer treatment.

Novel neurolisteriosis therapy using SPION as a drivable nanocarrier in gallic acid delivery to CNS

Neurolisteriosis is an infectious disease of the central nervous system (CNS) with a high mortality rate caused by Listeria monocytogenes. The CNS disorders suffer from inadequacy of drugs accessibility. An experimental in vivo model of neurolisteriosis was developed by oral administration of the bacteria in Wistar rats. It's speculated the capability of magnetite nanoparticles (MNPs) in ferrying gallic acid (GA), as a natural antimicrobial agent, through the blood-brain barrier (BBB) with the assistance of an external magnetic field (EMF). The capability of the formulated nanodrug in traversing through the BBB was approved by detecting blue spots in the Perls' Prussian staining of the brain tissue sections and by an increased iron content of the brain determined by the inductively coupled plasma spectroscopy. The GA release pattern and the nanodrug toxicity assay were promising. Anti-listeriosis effect of the formulated nanodrug was evaluated by molecular quantification of the relative abundance of survived bacteria in brain tissue samples. Besides, the relative expression of the listeriolysin O-encoding hly gene, the prominent virulence factor of L. monocytogenes, was determined using the rplD gene as a reference gene. The nanodrug-received rats showed a significantly less viable bacteria (13.2 ± 7.6%) and a 4.4-fold reduction in the relative expression of the hly gene in comparison to the sham group. Magnetite nanoparticles (MNPs) were synthesized by co-precipitation method, functionalized with GA, and finally coated with Tween 80. The physicochemical properties of the bare and surface modified materials were investigated using different techniques including X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopies, transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), dynamic light scattering (DLS) and Zeta Potential analyses, and vibrating sample magnetometry. In conclusion, MNPs displayed a considerable potential for drug delivery intentions to various target sites such as the CNS. Gallic acid exhibited a binary anti-listerial effect, the destruction of L. monocytogenes bacteria in addition to reducing the expression of the hly gene, which in turn causes reduced survivability of the bacteria in the CNS.

New fabrication of CuFe2O4/PAMAM nanocomposites by an efficient removal performance for organic dyes: Kinetic study

Today, removing pollutants from water sources is essential because of the population increase and the growing need for safe drinking water. Dyes are one of the most critical pollutants from industrial effluents such as paper and textile industries that profoundly affect the environment. There are several ways to remove environmental contaminants. Magnetic nanoparticles have a high ability to adsorb dyes. Of course, increasing the interaction between magnetic nanomaterials and pollutants is also essential, which can be done using porous materials such as dendrimers. In this work, the synthesis of CuFe₂O₄ magnetite nanoparticles within the polyamidoamine dendrimers structure was used as an efficient sorbent to remove both alizarin reds (ARS) and brilliant green (BG) dyes. Moreover, various parameters for dyes removal were studied. The optimum removal conditions were obtained for ARS within 30 min at a sorbent dose of 2 mg per 5 mL for the initial dye concentration of 7.0 ppm in pH 6 at 25 °C, and for BG within 45 min at a sorbent dose of 5 mg per 5 mL for the initial dye concentration of 17.0 ppm in pH 8 at 25 °C. At the optimum values of the above parameters, both dyes' removal efficiency was more than 97%. Also, the obtained results showed that the adsorption isotherm follows the Langmuir model and Temkin model for ARS and BG, respectively. This method was successfully used for the removal of both dyes in water samples.

Ternary biogenic silica/magnetite/graphene oxide composite for the hyperactivation of Candida rugosa lipase in the esterification production of ethyl valerate

Oil palm leaves (OPL) silica (SiO₂) can replace the energy-intensive, commercially produced SiO₂. Moreover, the agronomically sourced biogenic SiO₂ is more biocompatible and cost-effective enzyme support, which properties could be improved by the addition of magnetite (Fe₃O₄) and graphene oxide (GO) to yield better ternary support to immobilize enzymes, i.e., Candida rugosa lipase (CRL). This study aimed to optimize the Candida rugosa lipase (CRL immobilization onto the ternary OPL-silica-magnetite (Fe₃O₄)-GO (SiO₂/Fe₃O₄/GO) support, for use as biocatalyst for ethyl valerate (EV) production. Notably, this is the first study detailing the CRL/SiO₂/Fe3O4/GO biocatalyst preparation for rapid and high yield production of ethyl valerate (EV). AFM and FESEM micrographs revealed globules of CRL covalently bound to GL-A-SiO₂/Fe₃O₄/GO; similar to Raman and UV-spectroscopy results. FTIR spectra revealed amide bonds at 3478 cm^-1 and 1640 cm^-1 from covalent interactions between CRL and GL-A-SiO₂/Fe₃O₄/GO. Optimum immobilization conditions were 4% (v/v) glutaraldehyde, 8 mg/mL CRL, at 16 h stirring in 150 mM NaCl at 30 °C, offering 24.78 ± 0.26 mg/g protein (specific activity = 65.24 ± 0.88 U/g). The CRL/SiO₂/Fe₃O₄/GO yielded 77.43 ± 1.04 % of EV compared to free CRL (48.75 ± 0.70 %), verifying the suitability of SiO₂/Fe₃O₄/GO to hyperactivate and stabilize CRL for satisfactory EV production.

Instantaneous integration of magnetite nanoparticles on graphene oxide assisted by ultrasound for efficient heavy metal ion retrieval

We fabricated a magnetite nanoparticle-graphene oxide (GO) hybrid via a non-chemical and one-step process assisted by ultrasound in an aqueous solution where the nanoparticle attached to the hydrophobic region on graphite oxide (multi-layered GO) which, at the same time, was exfoliated. Unlike chemical methods such as precipitation, oxygen-containing functional groups on GO have not been consumed or reduced during the hybridization, leading that this hybrid exhibited good water solubility and high adsorption capacity for heavy metal ions such as Pb(II) and Au(III). After the adsorption, the hybrid was instantly collected using a magnet. This method can be useful for hybridizing various nanoparticles with GO.

Improvement in biochemical characteristics of cross-linked enzyme aggregates (CLEAs) with magnetic nanoparticles as support matrix

Recent developments in novel carriers for enzyme immobilization have led to improvement in the stability and cost-effectiveness of the biocatalysts for their enhanced suitability in the industrial applications. Cross-linked enzyme aggregates (CLEAs), a recent technique developed in the carrier-free type of enzyme immobilization is a simple and straightforward method. Moreover, the magnetic property and the higher surface-to-volume ratio of the maghemite nanoparticles have also been utilized in the present immobilization technique as magnetic nanoparticle-supported CLEAs (Mgnp-CLEAs). The stability studies of the free and immobilized enzyme revealed the Mgnp-CLEAs to have enhanced enzyme stability with an increase in the reusability cycle. The physical characterization of the nanoparticles and immobilized enzymes by the Scanning Electron Microscopy (SEM), Fourier-Transform Infrared spectroscopy (FT-IR) and X-ray diffraction analysis (XRD) showed the successful immobilization of the enzyme for its improved stability.

Porous magnetized carbon sheet nanocomposites for dispersive solid-phase microextraction of organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry

Carbon sheets were attached to magnetite (Fe₃O₄) nanoparticles. The resulting nanocomposite is shown to be a viable sorbent for use in magnetic dispersive solid-phase microextraction of three organophosphorus pesticides. The sorbent was synthesized via the sol-gel process followed by calcination and was characterized by an X-ray diffractometer, field emission scanning electron microscopy and energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and Raman spectrometry techniques. The affecting parameters in the adsorption and desorption steps were assessed and optimized via response surface methodology. Following desorption with dichloromethane, the OPPs were quantified by gas chromatography along with ion mobility spectrometry detection. Under optimized conditions, the limits of detection were 1.00, 0.46 and 0.85 μg L^-1 for fenthion, malathion and chlorpyrifos, respectively. Response is linear in the concentration range of 2-500 μg L^-1 for fenthion and malathion, and 2-1000 μg L^-1 for chlorpyrifos with the determination coefficient larger than 0.9969. The intra-day and inter-day precision were from 3 to 9% and 5 to 16%, respectively. The enrichment factor was greater than 142 for all the studied pesticides. The sorbent was used for analyze spiked water and vegetable samples and gave relative recovery higher than 82%. Graphical abstract A flowchart of the synthesis of porous magnetized carbon sheet nanocomposites and the process of the magnetic dispersive solid-phase microextraction (MD-μ-SPE) of three organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry (GC-IMS).

Synthesis and application of magnetic iron oxide nanoparticles on the removal of Reactive Black 5: Reaction mechanism, temperature and pH effects

The water pollution created by the textiles industry contains a large amount of azo dyes, such as Reactive Black 5 (RB5), which are recalcitrant in the environment. The feasibility and major mechanism of iron oxide nanoparticles (IONPs) in the removal of RB5 were investigated in this study. Our synthesized IONPs (17 nm) had a high surface area of 77.1 m²/g, possessed a magnetite crystal structure, and had a pH_zpc of 5.56. The main removal mechanism of RB5 with IONPs was adsorption by electrostatic attraction. The adsorption isotherm of RB5 on IONPs fitted the Langmuir and Freundlich equations well. The removal efficiency of RB5 with IONPs decreased with increasing the initial RB5 concentrations but increased with the increase of NP dosage and temperature. The average adsorption enthalpy was 24 kJ/mol. As the pH increased, the removal efficiency of IONPs decreased due to electrostatic repulsion. The high magnetic property of our iron oxide NPs results in the NPs being easily recyclable from water: the NPs retained a 90% removal efficiency after ten cycles, suggesting their great potential for use in pollution treatments.

Selenium speciation using capillary electrophoresis coupled with modified electrothermal atomic absorption spectrometry after selective extraction with 5-sulfosalicylic acid functionalized magnetic nanoparticles

A new method for selenium speciation in fermented bean curd wastewater and juice was described. This method involved sample extraction with 5-sulfosalicylic acid (SSA)-functionalized silica-coated magnetic nanoparticles (SMNPs), capillary electrophoresis (CE) separation, and online detection with a modified electrothermal atomic absorption spectrometry (ETAAS) system. The modified interface for ETAAS allowed for the introduction of CE effluent directly through the end of the graphite tube. Elimination of the upper injection hole of the graphite tube reduced the loss of the anlayte and enhanced the detection sensitivity. The SSA-SMNPs were synthesized and used to extract trace amounts of selenite [Se(IV)], selenite [Se(VI)], selenomethionine (SeMet), and selenocystine (SeCys2) from dilute samples. The concentration enrichment factors for Se(VI), Se(IV), SeMet, and SeCys2 were 21, 29, 18, and 12, respectively, using the SSA-SMNPs extraction. The limits of detection for Se(VI), Se(IV), SeMet, and SeCys2 were 0.18, 0.17, 0.54, 0.49ngmL(-1), respectively. The RSD values (n=6) of method for intraday were observed between 0.7% and 2.9%. The RSD values of method for interday were less than 3.5%. The linear range of Se(VI) and Se(IV) were in the range of 0.5-200ngmL(-1), and the linear ranges of SeMet and SeCys2 were 2-500 and 2-1000ngmL(-1), respectively. The detection limits of this method were improved by 10 times due to the enrichment by the SSA-SMNP extraction. The contents of Se(VI) and Se(IV) in fermented bean curd wastewater were measured as 3.83 and 2.62ngmL(-1), respectively. The contents of Se(VI), Se(IV), SeMet, and SeCys2 in fermented bean curd juice were determined as 6.39, 4.08, 2.77, and 4.00ngmL(-1), respectively. The recoveries were in the range of 99.14-104.5% and the RSDs (n=6) of recoveries between 0.82% and 3.5%.

Novel humic acid-bonded magnetite nanoparticles for protein immobilization

The present paper is the first report that introduces (i) a useful methodology for chemical immobilization of humic acid (HA) to aminopropyltriethoxysilane-functionalized magnetite iron oxide nanoparticles (APS-MNPs) and (ii) human serum albumin (HSA) binding to the obtained material (HA-APS-MNPs). The newly prepared magnetite nanoparticle was characterized by using Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and elemental analysis. Results indicated that surface modification of the bare magnetite nanoparticles (MNPs) with aminopropyltriethoxysilane (APS) and HA was successfully performed. The protein binding studies that were evaluated in batch mode exhibited that HA-APS-MNPs could be efficiently used as a substrate for the binding of HSA from aqueous solutions. Usually, recovery values higher than 90% were found to be feasible by HA-APS-MNPs, while that value was around 2% and 70% in the cases of MNPs and APS-MNPs, respectively. Hence, the capacity of MNPs was found to be significantly improved by immobilization of HA. Furthermore, thermal degradation of HA-APS-MNPs and HSA bonded HA-APS-MNPs was evaluated in terms of the Horowitz-Metzger equation in order to determine kinetic parameters for thermal decomposition. Activation energies calculated for HA-APS-MNPs (20.74 kJmol(-1)) and HSA bonded HA-APS-MNPs (33.42 kJmol(-1)) implied chemical immobilization of HA to APS-MNPs, and tight interactions between HA and HA-APS-MNPs.

Synthesis of Polymer Grafted Magnetite Nanoparticle with the Highest Grafting Density via Controlled Radical Polymerization

The surface-initiated ATRP of benzyl methacrylate, methyl methacrylate, and styrene from magnetite nanoparticle is investigated, without the use of sacrificial (free) initiator in solution. It is observed that the grafting density obtained is related to the polymerization kinetics, being higher for faster polymerizing monomer. The grafting density was found to be nearly 2 chains/nm2for the rapidly polymerizing benzyl methacrylate. In contrast, for the less rapidly polymerizing styrene, the grafting density was found to be nearly 0.7 chain/nm2. It is hypothesized that this could be due to the relative rates of surface-initiated polymerization versus conformational mobility of polymer chains anchored by one end to the surface. An amphiphilic diblock polymer based on 2-hydroxylethyl methacrylate is synthesized from the polystyrene monolayer. The homopolymer and block copolymer grafted MNs form stable dispersions in various solvents. In order to evaluate molecular weight of the polymer that was grafted on to the surface of the nanoparticles, it was degrafted suitably and subjected to gel permeation chromatography analysis. Thermogravimetric analysis, transmission electron microscopy, and Fourier transform infrared spectroscopy were used to confirm the grafting reaction.