Evaluation of miRNA Expression in 3D In Vitro Scaffold-Based Cancer Models

Accumulating experimental evidence suggests that 3D in vitro cancer models strengthen our understanding of vital processes in the tumor microenvironment (TME) and accelerate the drug discovery pipeline. Previous studies examining the effects of specific miRNAs on cancer cells in vitro have involved ectopic expression of miRNA mimics in 2D in vitro culture. Assessment of cell viability and gene expression ensures that upregulation of the chosen miRNA and repression of its target genes have been achieved. However, this 2D culture is overly simplified and lacks the complex cell to extracellular matrix (ECM) interactions observed in the native TME, yielding results often not reproduced when progressed to in vivo studies. Hence, this chapter describes a novel method of overexpressing the miRNA mimic in cells cultured on 3D collagen-based scaffolds adapted from tissue engineering techniques. Cell growth on scaffolds is sequentially monitored via a DNA quantification assay, and overexpression of the miRNA mimic and repression of its target gene is assessed via reverse transcription quantitative PCR (RT-qPCR).

Engineered neuronal microtissue provides exogenous axons for delayed nerve fusion and rapid neuromuscular recovery in rats

Nerve injury requiring surgical repair often results in poor functional recovery due to the inability of host axons to re-grow long distances and reform meaningful connections with the target muscle. While surgeons can re-route local axon fascicles to the target muscle, there are no technologies to provide an exogenous source of axons without sacrificing healthy nerves. Accordingly, we have developed tissue engineered neuromuscular interfaces (TE-NMIs) as the first injectable microtissue containing motor and sensory neurons in an anatomically-inspired architecture. TE-NMIs provide axon tracts that are intended to integrate with denervated distal structures and preserve regenerative capacity during prolonged periods without host innervation. Following implant, we found that TE-NMI axons promoted Schwann cell maintenance, integrated with distal muscle, and preserved an evoked muscle response out to 20-weeks post nerve transection in absence of innervation from host axons. By repopulating the distal sheath with exogenous axons, TE-NMIs also enabled putative delayed fusion with proximal host axons, a phenomenon previously not achievable in delayed repair scenarios due to distal axon degeneration. Here, we found immediate electrophysiological recovery after fusion with proximal host axons and improved axon maturation and muscle reinnervation at 24-weeks post-transection (4-weeks following delayed nerve fusion). These findings show that TE-NMIs provide the potential to improve functional recovery following delayed nerve repair.

Fabricating 3-dimensional human brown adipose microtissues for transplantation studies

Transplanting cell cultured brown adipocytes (BAs) represents a promising approach to prevent and treat obesity (OB) and its associated metabolic disorders, including type 2 diabetes mellitus (T2DM). However, transplanted BAs have a very low survival rate in vivo. The enzymatic dissociation during the harvest of fully differentiated BAs also loses significant cells. There is a critical need for novel methods that can avoid cell death during cell preparation, transplantation, and in vivo. Here, we reported that preparing BAs as injectable microtissues could overcome the problem. We found that 3D culture promoted BA differentiation and UCP-1 expression, and the optimal initial cell aggregate size was 100 μm. The microtissues could be produced at large scales via 3D suspension assisted with a PEG hydrogel and could be cryopreserved. Fabricated microtissues could survive in vivo for long term. They alleviated body weight and fat gain and improved glucose tolerance and insulin sensitivity in high-fat diet (HFD)-induced OB and T2DM mice. Transplanted microtissues impacted multiple organs, secreted protein factors, and influenced the secretion of endogenous adipokines. To our best knowledge, this is the first report on fabricating human BA microtissues and showing their safety and efficacy in T2DM mice. The proposal of transplanting fabricated BA microtissues, the microtissue fabrication method, and the demonstration of efficacy in T2DM mice are all new. Our results show that engineered 3D human BA microtissues have considerable advantages in product scalability, storage, purity, safety, dosage, survival, and efficacy.

Generating 3D human cardiac constructs from pluripotent stem cells

Human pluripotent stem cell (hPSC) technology has offered nearly infinite opportunities to model all kinds of human diseases in vitro. Cardiomyocytes derived from hPSCs have proved to be efficient tools for cardiac disease modeling, drug screening and pathological mechanism studies. In this review, we discuss the advantages and limitations of 2D hPSC-cardiomyocyte (hPSC-CM) system, and introduce the recent development of three-dimensional (3D) culture platforms derived from hPSCs. Although the development of bioengineering technologies has greatly improved 3D platform construction, there are certainly challenges and room for development for further in-depth research.

Functional tissue-engineered microtissue formed by self-aggregation of cells for peripheral nerve regeneration

Background

Peripheral nerve injury (PNI) is one of the essential causes of physical disability with a high incidence rate. The traditional tissue engineering strategy, Top-Down strategy, has some limitations. A new tissue-engineered strategy, Bottom-Up strategy (tissue-engineered microtissue strategy), has emerged and made significant research progress in recent years. However, to the best of our knowledge, microtissues are rarely used in neural tissue engineering; thus, we intended to use microtissues to repair PNI.

Methods

We used a low-adhesion cell culture plate to construct adipose-derived mesenchymal stem cells (ASCs) into microtissues in vitro, explored the physicochemical properties and microtissues components, compared the expression of cytokines related to nerve regeneration between microtissues and the same amount of two-dimension (2D)-cultured cells, co-cultured directly microtissues with dorsal root ganglion (DRG) or Schwann cells (SCs) to observe the interaction between them using immunocytochemistry, quantitative reverse transcription polymerase chain reaction (qRT-PCR), enzyme-linked immunosorbent assay (ELISA). We used grafts constructed by microtissues and polycaprolactone (PCL) nerve conduit to repair sciatic nerve defects in rats.

Results

The present study results indicated that compared with the same number of 2D-cultured cells, microtissue could secrete more nerve regeneration related cytokines to promote SCs proliferation and axons growth. Moreover, in the direct co-culture system of microtissue and DRG or SCs, axons of DRG grown in the direction of microtissue, and there seems to be a cytoplasmic exchange between SCs and ASCs around microtissue. Furthermore, microtissues could repair sciatic nerve defects in rat models more effectively than traditional 2D-cultured ASCs.

Conclusion

Tissue-engineered microtissue is an effective strategy for stem cell culture and therapy in nerve tissue engineering.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02676-0.

A rapidly magnetically assembled stem cell microtissue with "hamburger" architecture and enhanced vascularization capacity

With the development of magnetic manipulation technology based on magnetic nanoparticles (MNPs), scaffold-free microtissues can be constructed utilizing the magnetic attraction of MNP-labeled cells. The rapid in vitro construction and in vivo vascularization of microtissues with complex hierarchical architectures are of great importance to the viability and function of stem cell microtissues. Endothelial cells are indispensable for the formation of blood vessels and can be used in the prevascularization of engineered tissue constructs. Herein, safe and rapid magnetic labeling of cells was achieved by incubation with MNPs for 1 h, and ultrathick scaffold-free microtissues with different sophisticated architectures were rapidly assembled, layer by layer, in 5 min intervals. The in vivo transplantation results showed that in a stem cell microtissue with trisection architecture, the two separated human umbilical vein endothelial cell (HUVEC) layers would spontaneously extend to the stem cell layers and connect with each other to form a spatial network of functional blood vessels, which anastomosed with the host vasculature. The "hamburger" architecture of stem cell microtissues with separated HUVEC layers could promote vascularization and stem cell survival. This study will contribute to the construction and application of structural and functional tissues or organs in the future.

Assessment of α-amanitin toxicity and effects of silibinin and penicillin in different in vitro models

Silibinin (Sil) is used as hepatoprotective drug and is approved for therapeutic use in amanitin poisoning. In our study we compared Sil-bis-succinate (Sil_BS), a water-soluble drug approved for i.v.-administration, with Sil solved in ethanol (Sil_EtOH), which is normally used in research. We challenged monocultures or 3D-microtissues consisting of HepG2 cells or primary hepatocytes with α-amanitin and treated with SIL_BS, SIL_EtOH, penicillin and combinations thereof. Cell viability and the integrity of the microtissues was monitored. Finally, the expression of the transporters OATP1B1 and B3 was analyzed by qRT-PCR. We demonstrated that primary hepatocytes were more sensitive to α-amanitin compared to HepG2. Primary hepatocytes cultures were protected by Sil_BS and Sil_EtOH independent of penicillin from the cytotoxic effects of α-amanitin. Subsequent studies of the expression profile of the transporters OATP1B1/B3 revealed that primary hepatocytes do express both whereas in HepG2 cells they were hardly detectable. Our study showed that Sil_BS has significant advantage over Sil_EtOH with no additional benefit of penicillin. Moreover, HepG2 cells may not represent an appropriate model to investigate Amanita phalloides poisoning in vitro with focus on OATP transporters since these cells are lacking sensitivity towards α-amanitin probably due to missing cytotoxicity-associated transporters suggesting that primary hepatocytes should be preferred in this context.

Bioengineered Microtissue Models of the Human Bone Metastatic Microenvironment: A Novel In Vitro Theranostics Platform for Cancer Research

One of the major limitations of studying cancer in distant sites is the lack of representative laboratory models that mimic the biological processes occurring in vivo. In this protocol, we demonstrate the application of melt electrowriting technology (MEW) to provide 3D microfiber scaffolds suitable for this purpose. Using primary human cells, MEW scaffolds support the reproducible formation of human bone-like 3D microenvironments. Co-culture with human cancer cells provides an in vitro bioengineered model of metastases in bone, suitable for investigating cell-cell and cell-matrix interactions between bone and cancer cells. By proposing variations to standard tissue histology, immunohistochemistry, immunofluorescence, and 3D imaging techniques, we show how to characterize cell morphology and protein expression in a reproducibly engineered bone metastatic microtissue.

The impact of collagen membranes on 3D gingival fibroblast toroids

Background

Development in guided tissue regeneration requires biomaterial testing. 3D cell constructs represent a new approach to bridge the gap between cell culture and animal models. Following the hypothesis that attachment behavior of cells could be observed in toroidal 3D cell constructs, the aim of this study was to evaluate 3D gingival fibroblast (GF) toroids as a simple and feasible in vitro assay to test attachment of oral fibroblasts to collagen membranes.

Methods

3D ring-like structures (toroids) were formed from human GF. Hematoxylin-eosin staining was performed with formed GF toroids. Produced GF toroids were seeded onto plastic surfaces or collagen membranes. The morphology was documented at 24 h, 48 h and 72 h after seeding with light and fluorescence microscopy. Toroid vitality was assessed at same time points with a resazurin-based toxicity assay.

Results

GF showed normal morphology in toroid hematoxylin-eosin staining. Over 72 h, GF toroids on plastic surfaces stayed unchanged, while GF toroids on collagen membranes showed dilatation. GF toroids on plastic surfaces and collagen membranes were metabolically active over the observed period.

Conclusions

Depending on the surface material, 3D GF toroids show different attachment behavior. Thus, GF toroids are suitable as simple assay to study attachment behavior to various biomaterials.

Measurement of Contractility and Calcium Release in Cardiac Spheroids

There is a need for organotypic in vitro models that resemble the native tissue in functionality and tissue architecture for disease models and drug development. To this end, many 3D culture formats have been developed over time. Among the most often used type is the scaffold-free multicellular aggregate, also called spheroid, that forms by self-assembly. However, working with 3D cultures can be challenging because single cells are not as accessible as in 2D cultures and standard lab procedures must be adapted or replaced altogether. This chapter describes methods to create cardiac spheroids consisting of human iPSC-derived cardiomyocytes and cardiac fibroblasts and how to measure contractility or calcium signals using quantitative video analysis and confocal microscopy. Emphasis is on the particular challenges that 3D cultures pose and on affordable methods that do not require specialized equipment.

Real-Time and 3D Quantification of Cancer Cell Dynamics: Exploiting a Bioengineered Human Bone Metastatic Microtissue

The study of dynamic processes in the bone metastatic compartment has been challenged by the restrictive access and limited live imaging capabilities that in vivo bone models provide. In this protocol, we show the use of a human bone metastatic bioengineered microtissue for the quantitative investigation of cancer cells in an in vitro bone-like microenvironment. Using live cell epifluorescence microscopy, traditional- and spinning disc-confocal laser scanning microscopy, we demonstrate how to obtain multidimensional real-time data of fluorescently labeled cancer cells in the metastatic microenvironment. Using 4D imaging data processing software such as ImageJ and Imaris, we show how to transform qualitative images and videos into quantitative data of cancer cell attachment, morphology, proliferation, and migration in vitro in the human bone metastatic microtissue.

Bone marrow-derived stem/stromal cells (BMSC) 3D microtissues cultured in BMP-2 supplemented osteogenic induction medium are prone to adipogenesis

Bone marrow-derived mesenchymal stem/stromal cells (BMSC) may facilitate bone repair through secretion of factors that stimulate endogenous repair processes or through direct contribution to new bone through differentiation into osteoblast-like cells. BMSC microtissue culture and differentiation has been widely explored recently, with high-throughput platforms making large-scale manufacture of microtissues increasingly feasible. Bone-like BMSC microtissues could offer an elegant method to enhance bone repair, especially in small-volume non-union defects, where small diameter microtissues could be delivered orthoscopically. Using a high-throughput microwell platform, our data demonstrate that (1) BMSC in 3D microtissue culture result in tissue compaction, rather than growth, (2) not all mineralised bone-like matrix is incorporated in the bulk microtissue mass and (3) a significant amount of lipid vacuole formation is observed in BMSC microtissues exposed to BMP-2. These factors should be considered when optimising BMSC osteogenesis in microtissues or developing BMSC microtissue-based therapeutic delivery processes.

Generation of functional cardiac microtissues in a beating heart-on-a-chip

With the increasing attention on cardiovascular disorders and the current inability of pre-clinical models to accurately predict human physiology, the need for advanced and reliable heart in vitro models is paramount. Microfabrication technologies provide potential solutions in the organs-on-chip systems: microengineered devices where cell cultures can be hosted and cultured to develop three-dimensional models or microtissues with high similarity to human physiology. We here described the fabrication and operation procedures for a beating heart-on-a-chip. The device features a culture region for a 3D cardiac microtissue and a system for applying tuned mechanical stimulation during culture to improve cardiac development. We additionally describe procedures for characterizing tissue maturation via immunofluorescence and functional evaluations of microtissue contractility.

A vacuum-actuated microtissue stretcher for long-term exposure to oscillatory strain within a 3D matrix

Although our understanding of cellular behavior in response to extracellular biological and mechanical stimuli has greatly advanced using conventional 2D cell culture methods, these techniques lack physiological relevance. To a cell, the extracellular environment of a 2D plastic petri dish is artificially flat, extremely rigid, static and void of matrix protein. In contrast, we developed the microtissue vacuum-actuated stretcher (MVAS) to probe cellular behavior within a 3D multicellular environment composed of innate matrix protein, and in response to continuous uniaxial stretch. An array format, compatibility with live imaging and high-throughput fabrication techniques make the MVAS highly suited for biomedical research and pharmaceutical discovery. We validated our approach by characterizing the bulk microtissue strain, the microtissue strain field and single cell strain, and by assessing F-actin expression in response to chronic cyclic strain of 10%. The MVAS was shown to be capable of delivering reproducible dynamic bulk strain amplitudes up to 13%. The strain at the single cell level was found to be 10.4% less than the microtissue axial strain due to cellular rotation. Chronic cyclic strain produced a 35% increase in F-actin expression consistent with cytoskeletal reinforcement previously observed in 2D cell culture. The MVAS may further our understanding of the reciprocity shared between cells and their environment, which is critical to meaningful biomedical research and successful therapeutic approaches.

Fabrication of nanofibrous microcarriers mimicking extracellular matrix for functional microtissue formation and cartilage regeneration

Cartilage has rather limited capacities for self-repair and regeneration. To repair complexly shaped cartilage tissue defects, we propose the application of microtissues fabricated from bone marrow-derived mesenchymal stem cells (BMSCs) cultured in natural bionic nanofibrous microcarriers (NF-MCs). The NF-MCs were structurally and functionally designed to mimic natural extracellular matrix (ECM) by crosslinking dialdehyde bacterial cellulose (DBC) with DL-allo-hydroxylysine (DHYL) and complexing chitosan (CS) with DHYL through electrostatic interactions. The orthogonal design allows for fine tuning of fiber diameter, pore size, porosity, mechanical properties, and biodegradation rate of the NF-MC. BMSCs cultured in NF-MCs showed improved proliferation compared with those cultured in chitosan microcarriers (CS-MCs). After three-week culture under microgravity conditions, functional cartilage microtissues were generated. When implanted into a knee articular cartilage defect in mice, the microtissue showed superior in vivo cartilage repair as characterized by cell tracking, histology, micro CT image, and gait analysis. Versatile in natural biopolymer design and biomimetic in nanofibrous component embedded in macroporous microcarriers, these injectable NC-MCs demonstrate to be effective carriers for cell proliferation and differentiation. Furthermore, the functional microtissues also show their prospect in repair of cartilage tissue, and suggest their potential for other tissues in general.

Fabrication and Operation of Microfluidic Hanging-Drop Networks

The hanging-drop network (HDN) is a technology platform based on a completely open microfluidic network at the bottom of an inverted, surface-patterned substrate. The platform is predominantly used for the formation, culturing, and interaction of self-assembled spherical microtissues (spheroids) under precisely controlled flow conditions. Here, we describe design, fabrication, and operation of microfluidic hanging-drop networks.

Strategies for MSC expansion and MSC-based microtissue for bone regeneration

Mesenchymal stem cells (MSCs) have gained increasing attention as a potential approach for the treatment of bone injuries due to their multi-lineage differentiation potential and also their ability to recognize and home to damaged tissue sites, secreting bioactive factors that can modulate the immune system and enhance tissue repair. However, a wide gap between the number of MSCs obtainable from the donor site and the number required for implantation, as well as the lack of understanding of MSC functions under different in vitro and in vivo microenvironment, hinders the progression of MSCs toward clinical settings. The clinical translation of MSCs pre-requisites a scalable expansion process for the biomanufacturing of therapeutically qualified cells. This review briefly introduces the features of implanted MSCs to determine the best strategies to optimize their regenerative capacity, as well as the current MSC implantation for bone diseases. Current achievements for expansion of MSCs using various culturing methods, bioreactor technologies, biomaterial platforms, as well as microtissue-based expansion strategies are also discussed, providing new insights into future large-scale MSC expansion and clinical applications.

3D tumor microtissues as an in vitro testing platform for microenvironmentally-triggered drug delivery systems

Therapeutic approaches based on nanomedicine have garnered great attention in cancer research. In vitro biological models that better mimic in vivo conditions are crucial tools to more accurately predict their therapeutic efficacy in vivo. In this work, a new 3D breast cancer microtissue has been developed to recapitulate the complexity of the tumor microenvironment and to test its efficacy as screening platform for drug delivery systems. The proposed 3D cancer model presents human breast adenocarcinoma cells and cancer-associated fibroblasts embedded in their own ECM, thus showing several features of an in vivo tumor, such as overexpression of metallo-proteinases (MMPs). After demonstrating at molecular and protein level the MMP2 overexpression in such tumor microtissues, we used them to test a recently validated formulation of endogenous MMP2-responsive nanoparticles (NP). The presence of the MMP2-sensitive linker allows doxorubicin release from NP only upon specific enzymatic cleavage of the peptide. The same NP without the MMP-sensitive linker and healthy breast microtissues were also produced to demonstrate NP specificity and selectivity. Cell viability after NP treatment confirmed that controlled drug delivery is achieved only in 3D tumor microtissues suggesting that the validation of therapeutic strategies in such 3D tumor model could predict human response.

STATEMENT OF SIGNIFICANCE

A major issue of modern cancer research is the development of accurate and predictive experimental models of human tumors consistent with tumor microenvironment and applicable as screening platforms for novel therapeutic strategies. In this work, we developed and validated a new 3D microtissue model of human breast tumor as a testing platform of anti-cancer drug delivery systems. To this aim, biodegradable nanoparticles responsive to physiological changes specifically occurring in tumor microenvironment were used. Our findings clearly demonstrate that the breast tumor microtissue well recapitulates in vivo physiological features of tumor tissue and elicits a specific response to microenvironmentally-responsive nanoparticles compared to healthy tissue. We believe this study is of particular interest for cancer research and paves the way to exploit tumor microtissues for several testing purposes.

Expression of circadian core clock genes in fibroblasts of human gingiva and periodontal ligament is modulated by L-Mimosine and hypoxia in monolayer and spheroid cultures

OBJECTIVE

The circadian clock is involved in a plethora of physiological processes including bone formation and tooth development. While expression of circadian core clock genes was observed in various tissues, their role in the periodontium is unclear. We hypothesized that periodontal cells express circadian core clock genes and that their levels are modulated by hypoxia mimetic agents and hypoxia.

MATERIAL AND METHODS

Fibroblasts of human gingiva (GF) and periodontal ligament (PDLF) in monolayer and spheroid cultures were treated with the hypoxia mimetic agent L-Mimosine (L-MIM) or hypoxia. Reverse transcription and quantitative PCR were performed to assess the impact on mRNA levels of the circadian core clock genes Clock, Bmal1, Cry1, Cry2, Per1, Per2, and Per3.

RESULTS

GF and PDLF expressed Clock, Bmal1, Cry1, Cry2, Per1, Per2, and Per3 in monolayer and spheroid cultures. In monolayer cultures, L-MIM significantly reduced Clock, Cry2, and Per3 mRNA expression in GF and Clock, Cry1, Cry2, Per1, and Per3 in PDLF. Hypoxia significantly reduced Clock, Cry2, and Per3 in GF and Cry1, Cry2, and Per3 in PDLF. In spheroid cultures, L-MIM significantly decreased Clock, Cry1, Cry2, and Per3 in GF and PDLF. Hypoxia significantly decreased Cry2 and Per3 in GF and Clock and Per3 in PDLF.

CONCLUSIONS

GF and PDLF express circadian core clock genes. The hypoxia mimetic agent L-MIM and hypoxic conditions can decrease the expression of Clock, Cry1-2 and Per1 and Per3. The specific response depends on cell type and culture model. Future studies will show how this effect contributes to periodontal health and disease.

Utility of spherical human liver microtissues for prediction of clinical drug-induced liver injury

Drug-induced liver injury (DILI) continues to be a major source of clinical attrition, precautionary warnings, and post-market withdrawal of drugs. Accordingly, there is a need for more predictive tools to assess hepatotoxicity risk in drug discovery. Three-dimensional (3D) spheroid hepatic cultures have emerged as promising tools to assess mechanisms of hepatotoxicity, as they demonstrate enhanced liver phenotype, metabolic activity, and stability in culture not attainable with conventional two-dimensional hepatic models. Increased sensitivity of these models to drug-induced cytotoxicity has been demonstrated with relatively small panels of hepatotoxicants. However, a comprehensive evaluation of these models is lacking. Here, the predictive value of 3D human liver microtissues (hLiMT) to identify known hepatotoxicants using a panel of 110 drugs with and without clinical DILI has been assessed in comparison to plated two-dimensional primary human hepatocytes (PHH). Compounds were treated long-term (14 days) in hLiMT and acutely (2 days) in PHH to assess drug-induced cytotoxicity over an 8-point concentration range to generate IC₅₀ values. Regardless of comparing IC₅₀ values or exposure-corrected margin of safety values, hLiMT demonstrated increased sensitivity in identifying known hepatotoxicants than PHH, while specificity was consistent across both assays. In addition, hLiMT out performed PHH in correctly classifying hepatotoxicants from different pharmacological classes of molecules. The hLiMT demonstrated sufficient capability to warrant exploratory liver injury biomarker investigation (miR-122, HMGB1, α-GST) in the cell-culture media. Taken together, this study represents the most comprehensive evaluation of 3D spheroid hepatic cultures up to now and supports their utility for hepatotoxicity risk assessment in drug discovery.

3D culture models of tissues under tension

Cells dynamically assemble and organize into complex tissues during development, and the resulting three-dimensional (3D) arrangement of cells and their surrounding extracellular matrix in turn feeds back to regulate cell and tissue function. Recent advances in engineered cultures of cells to model 3D tissues or organoids have begun to capture this dynamic reciprocity between form and function. Here, we describe the underlying principles that have advanced the field, focusing in particular on recent progress in using mechanical constraints to recapitulate the structure and function of musculoskeletal tissues.

Well-organized spheroids as a new platform to examine cell interaction and behaviour during organ development

We present an experimental method allowing the production of three-dimensional organ-like structures, namely microtissues (MTs), in vitro without the need for exogenous extracellular matrix (ECM) or growth factors. Submandibular salivary glands (embryonic day ED14), kidneys (ED13) and lungs (ED13) were harvested from mouse embryos and dissociated into single cells by enzyme treatment. Single cells were seeded into special hanging drop culture plates (InSphero) and cultured for up to 14 days to obtain MTs. This strategy permitted full control of the quantity of seeded cells. The development of the MTs into organs was followed histologically and immunohistochemically. Well-organized epithelial structures surrounded by a basal lamina were formed, as confirmed by transmission electron microscopy. Expression of E-cadherin, vimentin, fibronectin and α-SMA was compared in organs and corresponding MTs by real-time quantitative polymerase chain reaction. Branching morphogenesis was induced in MTs (as shown by histology and immunostaining for fibronectin and perlecan) and was conserved even after 14 days of culture. MTs continued their development and their epithelial structures were comparable with those of the physiological organ at postnatal day 2 (PN2). Expression of aquaporins was investigated to obtain better support for the functional differentiation of epithelial cells. Histogenesis proceeded and led to the start of organogenesis. This experimental model might improve our knowledge of epithelial-mesenchymal histogenesis and can be employed to study development or cellular organization during the embryonic formation of organs.

Induction of mesenchymal stem cell chondrogenic differentiation and functional cartilage microtissue formation for in vivo cartilage regeneration by cartilage extracellular matrix-derived particles

We propose a method of preparing a novel cell carrier derived from natural cartilage extracellular matrix (ECM), designated cartilage ECM-derived particles (CEDPs). Through a series of processes involving pulverization, sieving, and decellularization, fresh cartilage was made into CEDPs with a median diameter of 263 ± 48 μm. Under microgravity culture conditions in a rotary cell culture system (RCCS), bone marrow stromal cells (BMSCs) can proliferate rapidly on the surface of CEDPs with high viability. Histological evaluation and gene expression analysis indicated that BMSCs were differentiated into mature chondrocytes after 21 days of culture without the use of exogenous growth factors. Functional cartilage microtissue aggregates of BMSC-laden CEDPs formed as time in culture increased. Further, the microtissue aggregates were directly implanted into trochlear cartilage defects in a rat model (CEDP+MSC group). Gait analysis and histological results indicated that the CEDP+MSC group obtained better and more rapid joint function recovery and superior cartilage repair compared to the control groups, in which defects were treated with CEDPs alone or only fibrin glue, at both 6 and 12 weeks after surgery. In conclusion, the innovative cell carrier derived from cartilage ECM could promote chondrogenic differentiation of BMSCs, and the direct use of functional cartilage microtissue facilitated cartilage regeneration. This strategy for cell culture, stem cell differentiation and one-step surgery using cartilage microtissue for cartilage repair provides novel prospects for cartilage tissue engineering and may have further broad clinical applications.

STATEMENT OF SIGNIFICANCE

We proposed a method to prepare a novel cell carrier derived from natural cartilage ECM, termed cartilage ECM-derived particles (CEDPs), which can support proliferation of MSCs and facilitate their chondrogenic differentiation. Further, the direct use of functional cartilage microtissue of MSC-laden CEDP aggregates for cartilage repair in vivo induced hyaline-like articular cartilage repair. This strategy for cell culture, stem cell differentiation and the one-step surgery for cartilage repair provide novel prospects for cartilage tissue engineering and may have further broad clinical applications.

The microwell-mesh: A novel device and protocol for the high throughput manufacturing of cartilage microtissues

Microwell platforms are frequently described for the efficient and uniform manufacture of 3-dimensional (3D) multicellular microtissues. Multiple partial or complete medium exchanges can displace microtissues from discrete microwells, and this can result in either the loss of microtissues from culture, or microtissue amalgamation when displaced microtissues fall into common microwells. Herein we describe the first microwell platform that incorporates a mesh to retain microtissues within discrete microwells; the microwell-mesh. We show that bonding a nylon mesh with an appropriate pore size over the microwell openings allows single cells to pass through the mesh into the microwells during the seeding process, but subsequently retains assembled microtissues within discrete microwells. To demonstrate the utility of this platform, we used the microwell-mesh to manufacture hundreds of cartilage microtissues, each formed from 5 × 10(3) bone marrow-derived mesenchymal stem/stromal cells (MSC). The microwell-mesh enabled reliable microtissue retention over 21-day cultures that included multiple full medium exchanges. Cartilage-like matrix formation was more rapid and homogeneous in microtissues than in conventional large diameter control cartilage pellets formed from 2 × 10(5) MSC each. The microwell-mesh platform offers an elegant mechanism to retain microtissues in microwells, and we believe that this improvement will make this platform useful in 3D culture protocols that require multiple medium exchanges, such as those that mimic specific developmental processes or complex sequential drug exposures.

The crucial role of mechanical heterogeneity in regulating follicle development and ovulation with engineered ovarian microtissue

Contemporary systems for in vitro culture of ovarian follicles do not recapitulate the mechanical heterogeneity in mammalian ovary. Here we report microfluidic generation of biomimetic ovarian microtissue for miniaturized three-dimensional (3D) culture of early secondary preantral follicles by using alginate (harder) and collagen (softer) to fabricate the ovarian cortical and medullary tissues, respectively. This biomimetic configuration greatly facilitates follicle development to antral stage. Moreover, it enables in vitro ovulation of cumulus-oocyte complex (COC) from the antral follicles in the absence of luteinizing hormone (LH) and epidermal growth factor (EGF) that are well accepted to be responsible for ovulation in contemporary literature. These data reveal the crucial role of mechanical heterogeneity in the mammalian ovary in regulating follicle development and ovulation. The biomimetic ovarian microtissue and the microfluidic technology developed in this study are valuable for improving in vitro culture of follicles to preserve fertility and for understanding the mechanism of follicle development and ovulation to facilitate the search of cures to infertility due to ovarian disorders.