Zinc-loaded mesoporous silica nanoparticles mitigate salinity stress in wheat seedlings through silica-zinc uptake, osmotic balance, and ROS detoxification

Abiotic stresses like salinity and micronutrient deficiency majorly affect wheat productivity. Applying mesoporous silica nanoparticles (MSiNPs) as a smart micronutrient delivery system can facilitate better stress management and nutrient delivery. In this purview, we investigated the potential of MSiNPs and Zn-loaded MSiNPs (Zn-MSiNPs) on the growth and physiology of wheat seedlings exposed to salinity stress (200 mM NaCl). Initially, the FESEM, DLS, and BET analysis portrayed nanoparticles' spherical shape, nano-size, and negatively charged mesoporous surface. A sustained release of Zn+2 from Zn-MSiNPs at 30 °C, diffused light, and pH 7 was perceived with a 96.57% release after 10 days. Further, the mitigation of NaCl stress in the wheat seedlings was evaluated with two different concentrations, each of MSiNPs and Zn-MSiNPs (1 g/L and 5 g/L), respectively. A meticulous improvement in the germination and growth of wheat seedlings was observed when treated with both MSiNPs and Zn-MSiNPs. A considerable increase in chlorophyll, total protein, and sugar content was in consort with a substantial decline in MDA, electrolyte leakage, and ROS accumulation, showcasing the nanomaterials' palliating effects. Most importantly, the K+/Na+ ratio in shoots increased significantly by 3.43 and 4.37 folds after being treated with 5 g/L Zn-MSiNPs, compared to their respective control sets (0 and 200 mM NaCl). Therefore, it can be concluded that the Zn-MSiNPs can effectively restrain the effects of salinity stress on wheat seedlings.

A novel approach for the green synthesis of iron nanoparticles using marigold extract, black liquor, and nanocellulose: Effect on marigold growth parameters

This study aimed to investigate a novel method for the green synthesis of iron nanoparticles (FeNPs) using marigold extract (Calendula officinalis L), kraft pulping black liquor, and nanocellulose. Then, the efficacy of FeNPs as a direct nanofertilizer on the growth parameters of marigold was investigated. Characterization techniques including FESEM, EDX, VSM, and FTIR were used to confirm the successful synthesis of FeNPs. The characterization results confirmed the formation and presence of FeNPs in the 20-100 nm range. FeNPs synthesized with nanocellulose notably enhanced marigold growth parameters compared to other materials. However, all nanoparticle variants, including those from marigold extract and black liquor, improved germination, plant height, root length, and plant dry weight compared to the control. Moreover, treatments exhibited higher available iron and total plant iron levels than the control. Thus, employing 10 mg FeNPs (prepared with 5.0 % nanocellulose) appears optimal for enhancing marigold growth and yield.

Role of particle size-dependent copper bioaccumulation-mediated oxidative stress on Glycine max (L.) yield parameters with soil-applied copper oxide nanoparticles

Increased impetus on the application of nano-fertilizers to improve sustainable food production warrants understanding of nanophytotoxicity and its underlying mechanisms before its application could be fully realized. In this study, we evaluated the potential particle size-dependent effects of soil-applied copper oxide nanoparticles (nCuO) on crop yield and quality attributes (photosynthetic pigments, seed yield and nutrient quality, seed protein, and seed oil), including root and seed Cu bioaccumulation and a suite of oxidative stress biomarkers, in soybean (Glycine max L.) grown in field environment. We synthesized three distinct sized (25 nm = S [small], 50 nm = M [medium], and 250 nm = L [large]) nCuO with same surface charge and compared with soluble Cu2+ ions (CuCl2) and water-only controls. Results showed particle size-dependent effects of nCuO on the photosynthetic pigments (Chla and Chlb), seed yield, potassium and phosphorus accumulation in seed, and protein and oil yields, with nCuO-S showing higher inhibitory effects. Further, increased root and seed Cu bioaccumulation led to concomitant increase in oxidative stress (H2O2, MDA), and as a response, several antioxidants (SOD, CAT, POX, and APX) increased proportionally, with nCuO treatments including Cu2+ ion treatment. These results are corroborated with TEM ultrastructure analysis showing altered seed oil bodies and protein storage vacuoles with nCuO-S treatment compared to control. Taken together, we propose particle size-dependent Cu bioaccumulation-mediated oxidative stress as a mechanism of nCuO toxicity. Future research investigating the potential fate of varied size nCuO, with a focus on speciation at the soil-root interface, within the root, and edible parts such as seed, will guide health risk assessment of nCuO.

A biocompatible NPK+Fe+Zn slow release fertilizer: synthesis and its evaluation in tomato plant growth improvement

Slow-release fertilizers (SRFs) play an essential and necessary role in sustainable agriculture. Using slow-release and environment friendly fertilizers can increase the growth of plants and reduce the loss of nutrients. Considering the deficiency of iron (Fe) and zinc (Zn) in calcareous soils, a slow-release fertilizer was prepared based on the polymeric nanocomposite, which contains NPK, Fe, and Zn. Its potential was evaluated on tomato plant growth by conducting an experiment in a factorial completely randomized design with three replications. Two levels of salinity (2 and 5 ds m-1, two types of soil texture) clay loam and sandy loam) and five levels of fertilizers were examined in the experiment. To this, the graphene oxide-chitosan coated-humic acid@Fe3O4 nanoparticles (Fe3O4@HA@GO-Cs), and the graphene oxide-chitosan coated-ammonium zinc phosphate (AZP@GO-Cs) were used as Fe and Zn sources, respectively. Then, the optimal Fe and Zn fertilizers in the presence of urea, phosphorus, and potassium slow- release fertilizers (SRF) were investigated under greenhouse conditions. The results indicated that the best improvement in growth and nutrient uptake in plants was achieved by using the SRF. Notably, in the shoots of tomato plants, the nitrogen, phosphorus, potassium, Fe, and Zn concentration increased by 44, 66, 46, 75, and 74% compared to the control. The use of nanofertilizer can be an effective, biocompatible, and economical option to provide Fe and Zn demand in plants.

Differential responses of green-synthesized iron nano-complexes in mitigating bicarbonate stress in almond trees

High bicarbonate concentration in the soil induces iron (Fe) deficiency in fruit trees. According to the promising performance of nanomaterials in supplying mineral nutrients, in this study the potential of 4 green synthesized Fe nano-complexes (Fe-NCs) on alleviating bicarbonate stress in almond trees was evaluated in a soilless culture. The Fe-NCs were formed on extracts of husks of almond, pistachio, walnut, and pomegranate and their efficiency in Fe supply was compared to a commercial FeEDDHA fertilizer. The bicarbonate stress was imposed by adding sodium bicarbonate + calcium carbonate to the Hoagland's nutrient solution: Control (without sodium bicarbonate + calcium carbonate); 10 mM NaHCO3+5 mM CaCO3; 20 mM NaHCO3+10 mM CaCO3. The plants were irrigated with nutrient solutions containing different concentrations of bicarbonate and different sources of Fe for 120 days. Bicarbonate stress induced chlorophyll decline, proline accumulation and leaf necrosis, and decreased leaf area. These responses were in line with decline in Fe concentration and development of oxidative damage in leaves, as hydrogen peroxide accumulation and membrane stability index decline were observed in the bicarbonate-stressed plants. Although walnut-nFe and pistachio-nFe intensified these adverse effects of bicarbonate stress, the almond-nFe and pomegranate-nFe recovered chlorophyll concentration, alleviated the oxidative damage, and restored Fe in the plants to the range of FeEDDHA under bicarbonate stress. Alleviating the damages was related to retrieving the concentration of proteins, hydrogen peroxide detoxification, and catalase activity in the leaves. These findings uncovered the potential of green synthesized almond-nFe and pomegranate-nFe as low-cost and effective Fe sources under bicarbonate stress.

Ionome mapping and amino acid metabolome profiling of Phaseolus vulgaris L. seeds imbibed with computationally informed phytoengineered copper sulphide nanoparticles

This study reports the effects of a computationally informed and avocado-seed mediated Phyto engineered CuS nanoparticles as fertilizing agent on the ionome and amino acid metabolome of Pinto bean seeds using both bench top and ion beam analytical techniques. Physico-chemical analysis of the Phyto engineered nanoparticles with scanning-electron microscopy, transmission electron microscopy, X-ray diffraction, and Fourier Transform Infrared Spectroscopy confirmed the presence of CuS nanoparticles. Molecular dynamics simulations to investigate the interaction of some active phytocompounds in avocado seeds that act as reducing agents with the nano-digenite further showed that 4-hydroxybenzoic acid had a higher affinity for interacting with the nanoparticle's surface than other active compounds. Seeds treated with the digenite nanoparticles exhibited a unique ionome distribution pattern as determined with external beam proton-induced X-ray emission, with hotspots of Cu and S appearing in the hilum and micropyle area that indicated a possible uptake mechanism via the seed coat. The nano-digenite also triggered a plant stress response by slightly altering seed amino acid metabolism. Ultimately, the nano-digenite may have important implications as a seed protective or nutritive agent as advised by its unique distribution pattern and effect on amino acid metabolism.

Application of ZnO Nanoparticles Encapsulated in Mesoporous Silica on the Abaxial Side of a Solanum lycopersicum Leaf Enhances Zn Uptake and Translocation via the Phloem

Foliar application of nutrient nanoparticles (NPs) is a promising strategy for improving fertilization efficiency in agriculture. Phloem translocation of NPs from leaves is required for efficient fertilization but is currently considered to be feasible only for NPs smaller than a cell wall pore size exclusion limit of <20 nm. Using mass spectrometry imaging, we provide here the first direct evidence for phloem localization and translocation of a larger (∼70 nm) fertilizer NP comprised of ZnO encapsulated in mesoporous SiO2 (ZnO@MSN) following foliar deposition. The Si content in the phloem tissue of the petiole connected to the dosed leaf was ∼10 times higher than in the xylem tissue, and ∼100 times higher than the phloem tissue of an untreated tomato plant petiole. Direct evidence of NPs in individual phloem cells has only previously been shown for smaller NPs introduced invasively in the plant. Furthermore, we show that uptake and translocation of the NPs can be enhanced by their application on the abaxial (lower) side of the leaf. Applying ZnO@MSN to the abaxial side of a single leaf resulted in a 56% higher uptake of Zn as well as higher translocation to the younger (upper) leaves and to the roots, than dosing the adaxial (top) side of a leaf. The higher abaxial uptake of NPs is in alignment with the higher stomatal density and lower density of mesophyll tissues on that side and has not been demonstrated before.

Biosynthesis of ZnO and TiO2 nanoparticles using Ipomoea carnea leaf extract and its effect on black carrot (Daucus carota L.) cv. Pusa Asita

Nano fertilizers (NFs) are now becoming an important tool for plant nutrient management having capabilities to improve soil fertility, crop productivity and quality of agricultural products. Since, they are needed in very small amount, thus, reduces cost of crop production. Among different essential or beneficial plant nutrients, Zn and Ti are important micro nutrients having number of beneficial effect on crop growth, yield, quality and post harvest life. Present experiment was carried out to prepare ZnO and TiO2 nanoparticles (NPs) through green technology by using aqueous extract of Ipomoea carnea (morning glory) leaves. In order to investigate size, morphology, composition, and stability of selected NPs, the detailed characterization was carried out using UV-visible spectroscopy, FTIR, HRTEM, EDX, BET, X-ray diffraction, XPS and particle size distribution studies. Subsequently, the effect of foliar spray of ZnO and TiO2 NPs was evaluated in respect of vegetative growth, yield and quality of black carrot (Daucus carota L.) cv. Pusa Asita in presence of 50% Recommended dose of fertilizer (RDF) to assess their effect on fertilizer use efficiency also. There were 8 treatments viz. Control (no fertilizer), recommended dose of fertilizer (RDF), TiO2 (5, 10 and 15 ppm along with 50% RDF), ZnO (50, 75 and 100 ppm along with 50% RDF)] with 3 replications following Randomised Block Design having 24 plots (1 m × 1 m). The observations were taken for vegetative growth, edible root yield and root quality parameters. Although, the growth, yield and quality parameters were found superior (root yield 43.84 g/plant) under conventional system of recommended dose of fertilizers (RDF) of NPK, however, TiO2 NPs also showed very promising result close to RDF as compared to ZnO NPs. Among them, 5 ppm TiO2 foliar application along with 50% NPK was found to be the best in terms of vegetative growth, root yield (38.73 g/plant) and quality of black carrot. It was also found that higher concentration of TiO2 and ZnO NPs had adverse effect on the plant performance. Therefore, it can be concluded that 5 ppm TiO2 NPs along with 50% RDF was good for black carrot production.

Deciphering the fertilizing and disease suppression potential of phytofabricated zinc oxide nanoparticles on Brassicajuncea

Every year 30-50% of crops suffer from fungal and bacterial diseases. Use of various chemically synthesized fungicides and bactericides make the soil environment more toxic and harmful to the plant health. Therefore, there is need to find non-toxic and cost effective alternative against plant pathogen. In recent years, nanotechnology has got attention because of its wide application in different areas of agriculture. Various nanoparticles have been used in agriculture for their fertilizing and antimicrobial potential. Among them zinc oxide nanoparticles (ZnO NPs) have gained the attention of agriculturists as zinc is an essential micronutrient for plants. Antifungal activity of Tb-ZnO NPs (Terminalia bellerica synthesized zinc oxide nanoparticles) against Alternaria brassicae causative agent of blight disease in Brassica juncea has been reported in our previous study. To use Tb-ZnO NPs as nanofungicides and simultaneously as nanofertilizers, the doses of Tb-ZnO NPs beneficial to the Brassica juncea crop is need to be known. Therefore, experiment has been designed to see the protective and curative potential of Tb-ZnO NPs in alluvial and calcareous soil. Biochemical constituents and stress enzymes analysis has shown significant potential of Tb-ZnO NPs at 200 ppm concentration in alleviating the stress caused by A. brassicae by modulating the photosynthetic, biochemical and enzymatic characteristics. Growth parameter analysis confirmed the role of Tb-ZnO NPs in increasing root and shoot length of B. juncea. Yield component such as seed number, seed weight and oil content of B. juncea crop also has been increased. There was one-fold increase in oil content of B. juncea as compared to control. Maximum percent disease control was found to be 70% in alluvial soil (protective method) grown plants. Therefore, present study supports the hypothesis of a relationship between nutrients and disease suppression.

Engineered nanoparticles in plant growth: Phytotoxicity concerns and the strategies for their attenuation

In the agricultural sector, the use of engineered nanoparticles (ENPs) has been acclaimed as the next big thing for sustaining and increasing crop productivity. A vast amount of literature is available regarding the growth-promoting attributes of different ENPs. In this context, it has been emphasized that the ENPs can bolster vegetative growth, leaf development, and seed setting and also help in mitigating the effects of abiotic and biotic stresses. At the same time, there have been a lot of speculations and concerns regarding the phytotoxicity of ENPs off-late. In this connection, many research articles have presented the negative effects of ENPs on plant systems. These studies have highlighted that almost all the ENPs impart a certain degree of phytotoxicity in terms of reduction in growth, biomass, impairment of photosynthesis, oxidative status of plant cells, etc. Mostly, the ENPs based on metal or metal oxides (Cd, Cr, Pb, Ag, Ce, etc.) and nonmetals (C) that are introduced into the environment are known to incite inhibitory effects. However, the phytotoxicity of ENPs are known to be determined mostly by the chemical nature of the element, size, surface charge, coating molecules, and abiotic factors like pH and light. This review article, therefore, elucidates the phytotoxic properties of different ENPs and the plant responses induced at the molecular level subjected to nanoparticle exposure. Moreover, the article highlights the probable strategies that may be adopted for the suppression of the phytotoxicity of ENPs to ensure the safe and sustainable application of ENPs in crop fields.

Effect of methods application of copper nanoparticles in the growth of avocado plants

The aim of this greenhouse study was to evaluate root irrigation, foliar spray, and stem injection in order to find the best method for the nanofertilization of avocado plants with green synthesized CuNPs. One-year-old avocado plants were supplied four times (every 15 days) with 0.25 and 0.50 mg/ml of CuNPs through the three fertilization methods. Stem growth and new leaf formation were evaluated over time and after 60 days of CuNPs exposure, several plant traits (root growth, fresh and dry biomass, plant water content, cytotoxicity, photosynthetic pigments, and total Cu accumulation in plant tissues) were evaluated for CuNPs improvement. Regarding the control treatment, stem growth and new leaf appearance were increased by 25 % and 85 %, respectively, by the CuNPs supply methods of foliar spray>stem injection>root irrigation, with little significant differences among NPs concentrations. Avocado plants supplied with 0.25 and 0.50 mg/ml CuNPs maintained a hydric balance and cell viability ranged from 91 to 96 % through the three NPs application methods. TEM did not reveal any ultrastructural organelle changes induced by CuNPs in leaf tissues. The concentrations of CuNPs tested were not high enough to exert deleterious effects on the photosynthetic machinery of avocado plants, but photosynthetic efficiency was also found to be improved. The foliar spray method showed improved uptake and translocation of CuNPs, with almost no loss of Cu. In general, the improvement in plant traits indicated that the foliar spray method was the best for nanofertilization of avocado plants with CuNPs.

Glycine betaine capped ZnO NPs eliminate oxidative stress to coriander plants grown under NaCl presence

Salinity is one of the major abiotic stresses for sustainable agriculture. The use of mineral nutrients in form of nanoparticles can be a novel strategy to fight against abiotic stresses. An in vitro study has been conducted to investigate the effect of zinc oxide nanoparticles (ZnO NPs) capped with glycine betaine (ZnOBt) on coriander plants exposed to saline (NaCl) stress. SEM and XRD analysis revealed 14.73 nm and 17.34 nm size of ZnO and ZnOBt NPs, respectively with spherical to hexagonal structures. Coriander plant length and biomass increased by the application of ZnO and ZnOBt NPs. ZnOBt NPs depicted promising results at 100 mg/L where, shoot and root length increased up to 14 cm and 13 cm, respectively as compared to plants grown under saline stress. ZnOBt NPs also increased fresh and dry weight of shoots and roots as compared to other treatments. The results depict that ZnOBt NPs mitigated stress condition. This is evident from concentration of phenolic and flavonoid contents that decreased in both roots and shoots. Free radical scavenging activity, total antioxidant capacity and total reducing power also decreased in plants by ZnOBt NPs when applied with stress. The concentration of superoxide and peroxide dismutase also decreased by application of ZnOBt NPs to salt stress plants. Glycine betaine with ZnO NPs, in conclusion, can be an effective remedy for salinity-exposed plants. These nanoparticles can be encouraged as a viable technique to overcome the detrimental effects of saline stress on plants.

IAA-decorated CuO nanocarriers significantly improve Chickpea growth by increasing antioxidative activities

Plant growth regulators tagged on metallic oxide nanoparticles (NPs) may function as nanofertilizers with reduced toxicity of NPs. CuO NPs were synthesized to function as nanocarriers of Indole-3-acetic acid (IAA). Powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed 30.4 nm size of NPs and sheet-like structure, respectively, of CuO-IAA NPs. Fourier-transform infrared spectroscopy (FTIR) confirmed CuO-IAA formation. IAA-decorated CuO NPs enhanced the physiological parameters of Chickpea plants, i.e., root length, shoot length, and biomass compared to naked CuO NPs. The variation in physiological response was due to change of phytochemical contents in plants. Phenolic content increased up to 17.98 and 18.13 µgGAE/mg DW at 20 and 40 mg/L of CuO-IAA NPs, respectively. However, significant decrease in antioxidant enzymes' activity was recorded compared to control. Presence of CuO-IAA NPs increased the reducing potential of plants at higher concentration of NPs, while decrease in total antioxidant response was observed. This study concludes that IAA conjugation to CuO NPs reduces toxicity of NPs. Furthermore, NPs can be explored as nanocarriers for plant modulators and slow release in future studies.

Nanotechnology in agriculture: Comparison of the toxicity between conventional and nano-based agrochemicals on non-target aquatic species

Increased crop production is necessary to keep up with rising food demand. However, conventional agricultural practices and agrochemicals are unable to sustain further increases without serious risk of adverse environmental consequences. The implementation of nanotechnology in agriculture practices has been increasing in recent years and has shown tremendous potential to boost crop production. The rapid growth in development and use of nano-agrochemicals in agriculture will inevitably result in more chemicals reaching water bodies. Some unique properties of nanoformulations may also alter the toxicity of the AI on aquatic organisms when compared to their conventional counterparts. Results from studies on conventional formulations may not properly represent the toxicity of new nanoformulations in the aquatic environment. As a result, current guidelines derived from conventional formulations may not be suitable to regulate those newly developed nanoformulations. Current knowledge on the toxicity of nano-agrochemicals on aquatic organisms is limited, especially in an ecologically relevant setting. This review complies and analyzes 18 primary studies based on 7 criteria to provide a comprehensive analysis of the available toxicity information of nano-agrochemicals and their conventional counterparts on aquatic organisms. Our analysis demonstrates that the overall toxicity of nano-agrochemicals on non-target aquatic species is significantly lower as compared to conventional counterparts. However, further dividing formulations into three categories (organic, bulk and ionic) shows that some nanoformulations can be more toxic when compared to bulk materials but less toxic as compared to ionic formulations while organic nanopesticides do not show a general trend in overall toxicity. Moreover, our analysis reveals the limitations of current studies and provides recommendations for future toxicity studies to ensure the effective and sustainable application of nano-agrochemicals, which will be beneficial to both the agrochemical industry and regulatory agencies alike.

Responses of soybean (Glycine max [L.] Merr.) to zinc oxide nanoparticles: Understanding changes in root system architecture, zinc tissue partitioning and soil characteristics

Addressing global Zinc (Zn) deficiency in food and feed requires innovation in Zn fertilizer. Recently, Zn oxide nanoparticles (ZnONPs) have piqued interest for potential use as a novel nano-Zn fertilizer. However, little is known about potential factors influencing ZnONPs partitioning in different plant tissues, and changes in root system architecture (RSA) and soil characteristics. Herein, we tested the effects of particle size (38, 59, and > 500 nm) and concentration (0-500 mg/kg) of ZnONPs on Zn bioaccumulation in multiple tissues in soil-grown soybean (Glycine max) grown for 120 days, including changes in RSA (root biomass, length, area, volume, and density) and soil characteristics (pH and electrical conductance [EC]). Our results showed significant effects of Zn compound types, Zn concentrations and their interaction on RSA, and Zn uptake by root, stem, leaf, and seed, in soybean. Concentration-response curves for root structures with varied sized ZnONPs and Zn2+ ions were deemed nonlinear, whereas for Zn distribution between different tissues the concentration-response curves were linear. Interestingly, ZnONPs and Zn2+ ions up to 200 mg/kg showed beneficial effects on root growth and development, but toxic response was observed at higher concentrations for both compounds. Root dry weight, length, volume, and area with 200 mg/kg ZnONPs-38 nm were higher by 48%, 56%, 33% and 44%, respectively, compared to control, and were higher by 15%, 23%, 15% and 19%, respectively, compared to 200 mg/kg ZnCl2. In general, soybean responses to the smallest size ZnONPs-38 nm were higher for all parameters evaluated compared to the larger-sized ZnONPs (59 and > 500 nm) and Zn2+ ions. Zn bioaccumulation varied among tissues in the order: root > seed > leaf > stem. A minor but steady decrease in soil pH and EC occurred among different concentrations for both ZnONPs and Zn2+ ions. Improved RSA can facilitate water and nutrient uptake in soybean, promoting growth and yield, especially considering arid and semi-arid climates where water is a limiting factor. Further, improving seed and shoot Zn levels, as demonstrated herein using ZnONPs, is paramount to addressing Zn deficiency in food and feed. Future studies assessing potential impacts on soil microbes, soil health and food safety upon ZnONPs application is critical for risk assessment of the novel nanofertilizer.

Biofertilizers and nanofertilizers for sustainable agriculture: Phycoprospects and challenges

Increased food demands and ceasing nutrient deposits have resulted in a great shortfall between the food supply and demand and would be worse in the years to come. Higher inputs of synthetic fertilizers on lands have resulted in environmental pollution, persistent changes in the soil ecology, and physicochemical conditions. This has greatly decreased the natural soil fertility thereby hindering agricultural productivity, human health, and hygiene. Bio-based resilient nutrient sources as wastewater-derived algae are promising as a complete nutrient for agriculture and have the potential to be used in soilless cultivations. Innovations in nano-fortification and nano-sizing of minerals and algae have the potential to facilitate nutrients bioavailability and efficacy for a multifold increase in productivity. In this context, various options on minerals nanofertilizer application in agricultural food production besides efficient biofertilizer have been investigated. Algal biofertilizer with the nanoscale application has huge prospects for further agriculture productivities and fosters suitable development.

Engineered zinc oxide nanoparticles: an alternative to conventional zinc sulphate in neutral and alkaline soils for sustainable wheat production

Zinc oxide nanoparticles (ZnONP) were synthesized and characterized using SEM, EDAX, DLS and UV-Vis spectra. Its use as a nanofertilizer as an alternative to conventional zinc sulphate (ZnSO₄.7H₂O) was evaluated in five Zn-deficient soils with a variable pH range (7.2-8.7). For this, the carbon of the soil microbial biomass (SMBC), the bacterial population, the nutrient dynamics and the biometric parameters of the wheat crop were assessed. The varying dosages (0, 100, 200 and 500 mg/L), sizes (30-100 nm), and the spherical shape of ZnONPs were evaluated in comparison to ZnSO₄.7H₂O levels. Results showed the maximum SMBC and bacterial population at 100 mg/L of ZnONPs but a sharp decline at higher concentrations. In addition, soil application of ZnONPs at 5 mg/kg produced a higher root elongation (4.3-8.8%), shoot elongation (3.5-4.0%), total chlorophyll (4.9-5.6%), grain yield (1.7-2.3%) and grain Zn-content (1.6-2.1%) in comparison to the conventional ZnSO₄.7H₂O at 10 mg/L. ZnONPs at 100 mg/L produced a higher soil microbial biomass carbon (3.9-4.6%), bacterial population (7.2-9.0%), germination (22%) and grain Zn-content (17.9-20%) as compared to the conventional ZnSO₄.7H₂O at 0.5%. The higher grain Zn-contents could be attributed to the small size and high surface area of ZnONPs resulting in easy entry into the plant system either through root or foliar by penetrating the pores present in the cell membranes. Conversely, the conventional ZnSO₄.7H₂O, due to its larger size and higher solubility as compared to ZnONPs, has low retention in plant systems, high surface run-off and low fertilizer efficiency. Thus, the authors concluded to apply spherically synthesized ZnONPs (average size-36.7 nm) at 5 mg/kg in the soil application and 100 mg/L in the foliar application for maintaining SMBC and bacterial population, improving total chlorophyll, and grain Zn-contents and overall sustaining wheat production in Zn-deficient neutral and alkaline soils.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02861-1.

Current and future perspectives on the use of nanofertilizers for sustainable agriculture: the case of phosphorus nanofertilizer

Over the last century, the demand for food resources has been continuously increasing with the rapid population growth. Therefore, it is critically important to adopt sustainable farming practices that can enhance crop production without the excessive use of fertilizers. In this regard, there is a growing interest in the use of nanomaterials for improving plant nutrition as an alternative to traditional chemical or mineral fertilizers. Using this technology, the efficiency of micro- and macro-nutrients in plants can increase. Various nanomaterials have been successfully applied in agricultural production, compared to conventional fertilizers. Among the major plant nutrients, phosphorus (P) is the least accessible since most farmlands are frequently P deficient. Hence, P use efficiency should be maximized to conserve the resource base and maintain agricultural productivity. This review summarizes the current research and the future possibilities of nanotechnology in the biofortification of plant nutrition, with a focus on P fertilizers. In addition, it covers the challenges, environmental impacts, and toxic effects that have been explored in the area of nanotechnology to improve crop production. The potential uses and benefits of nanoparticle-based fertilizers in precision and sustainable agriculture are also discussed.

Lignin-based nanoparticles for recovery and separation of phosphate and reused as renewable magnetic fertilizers

In this work, magnetic lignin-based nanoparticles (M/ALFe) were developed and used to adsorb phosphorus to obtain phosphorus-saturated nanoparticles (M/ALFeP). The nanoparticles were then used as renewable slow-release compound fertilizers. First, aminated lignin was synthesized via Mannich reaction, and then Fe₃O₄ nanoparticles were loaded and Fe³⁺ was chelated on the aminated lignin to prepare M/ALFe. Finally, M/ALFeP were obtained after adsorption of phosphorus. The effects of nanoparticle dosage, solution pH and adsorption time on adsorption efficiency were determined. Adsorption isotherm and adsorption kinetics results suggested that the adsorption was coincided with the pseudo-second-order and Temkin model, respectively. The cumulative release of Fe and phosphorus from M/ALFeP increased gradually and reached to 67.2% and 69.1% in soil after 30 days, respectively. After the release of nutrients, M/ALFeP can be separated by a magnet with a high recovery ratio from water or soil and regenerated for phosphate recovery again. Therefore, the magnetic lignin-based nanoparticles have a promising application potential as an efficiently separated and renewable nanomaterial for removal of low concentration phosphate in wastewater treatment and as a slow-release fertilizer in sustainable agriculture.

Chitosan-silicon nanofertilizer to enhance plant growth and yield in maize (Zea mays L.)

We report a novel chitosan-silicon nanofertilizer (CS-Si NF) wherein chitosan-tripolyphosphate (TPP) nano-matrix has been used to encapsulate silicon (Si) for its slow release. It was synthesied by ionic gelation method and characterized by dynamic light scattering (DLS), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and atomic absorption spectrophotometry (AAS). The developed CS-Si NF exhibited slow release of Si and promoted gowth and yield in maize crop. Seeds primed with different concentrations of CS-Si NF (0.04-0.12%, w/v) exhibited up to 3.7 fold increased seedling vigour index (SVI) as compared with SiO₂. Its foliar spray significantly induced antioxidant-defence enzymes' activities and equilibrated cellular redox homeostasis by balancing O₂^-1 and H₂O₂ content in leaf as compared with SiO₂. Application of nanofertilizer (0.01-0.16%, w/v) stirred total chlorophyll content (21.01-25.11 mg/g) and leaf area (159.34-166.96 cm²) to expedite photosynthesis as compared with SiO₂. In field experiment, 0.08% CS-Si NF resulted in 43.4% higher yield/plot and 0.04% concentration gave 45% higher test weight as compared with SiO₂. Fecund and myriad effects of developed nanofertilizer over SiO₂ could be attributed to slow/protective release of Si from nanofertilizer. Overall, results decipher the enormous potential of CS-Si NF for its use as a next generation nanofertilizer for sustainable agriculture.

Efficacy of nanoparticles as nanofertilizer production: a review

Owing to the ever-increasing demand for food, the growing global population has forced farmers to increase fertilizer use. The overall use of fertilizers increased by 13 times between 1950 and 2020, from 15 to 194 million tons. Due to the resource shortages of chemical fertilizers on the market, agricultural costs are rising drastically every day because they cause an adverse impact on the environment by releasing chemical particulates and run-off agriculture. Biofertilizers have thus become a safer supplement to increase crop production without doing any harm to the environment, as they are produced industrially from a selected community of microorganisms that either develop a mutually beneficial relationship with plants or are part of their rhizosphere. They still have some drawbacks, which led to the development of a new avenue for the application of nanotechnology-mediated nanofertilizers. Nanotechnology recommends significant prospects for tailoring nanofertilizer production. They are typically coated with desired chemical composition having controlled release and targeted delivery of effective nanoscale ingredients, ability to improve plant productivity and to minimize environmental pollutants. The present review focuses primarily on the usefulness of nanofertilizers, as well as its environmental and safety concerns. The research would also include useful knowledge related to the introduction of different forms of nanoparticles within the agricultural field, contributing to the opening of a new route to nanorevolution.

Effects of biogenerated ferric hydroxides nanoparticles on truffle mycorrhized plants

Truffles are highly valuable ectomycorrhizal fungi that grow naturally in alkaline, calcareous soils. Iron deficiency chlorosis is a common problem in truffle (Tuber spp.) cultivation due to the high quantity of lime added to increase the pH of acidic soils. In this work, the effects of ferric hydroxide nanoparticles embedded in an exopolysaccharide (Fe-EPS NPs), extracted from cultures of Klebsiella oxytoca DSM 29614, were investigated on Quercus robur seedlings under greenhouse conditions. The plants were inoculated with Tuber borchii (the bianchetto truffle) and were cultivated with and without iron nanoparticle additions and compared with non-inoculated control plants. The seedlings were grown in limed soil in order to induce iron deficiency. Low doses of Fe-EPS NPs had a beneficial effect on the growth of the plants inoculated with T. borchii, increasing their height and reducing their leaf chlorosis 5 months after the first Fe-EPS NP treatment. Moreover, Fe-EPS NP treatments significantly increased the level of T. borchii mycorrhizal colonization and the ectomycorrhizal mantle thickness. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) applied to cross sections of mycorrhizas showed that Fe accumulated in the fungal mantle and apparently was slowly released serving as a resilient reservoir of iron for the plant. The results suggest that the application of Fe-EPS NPs is a promising technique in the production of Tuber mycorrhized plants in the nursery and could have future applications in the field.

Differential growth, nutrition, physiology, and gene expression in Melissa officinalis mediated by zinc oxide and elemental selenium nanoparticles

Regarding the rapid progress in the production and consumption of nanobased products, this research considered the behavior of Melissa officinalis toward zinc oxide nanoparticles (nZnO), nanoelemental selenium (nSe), and bulk counterparts. Seedlings were irrigated with nutrient solution containing different doses of nZnO (0, 100, and 300 mg l^-1) and/or nSe (0, 10, and 50 mg l^-1). The supplements made changes in growth and morphological indexes in both shoot and roots. The mixed treatments of nSe10 and nZnO led to a drastic increase in biomass, activation of lateral buds, and stimulations in the development of lateral roots. However, the nSe50 reduced plants' growth (45.5%) and caused severe toxicity which was basically lower than the bulk. Furthermore, the nSe and nZnO improved K, Fe, and Zn concentrations in leaves and roots, except for seedlings exposed to nSe50 or BSe50. Moreover, the nSe and nZnO supplementations in a dose-dependent manner caused changes in leaf non-protein thiols (mean = 77%), leaf ascorbate content (mean = 65%), and soluble phenols in roots (mean = 28%) and leaves (mean = 61%). In addition, exposure to nZnO and/or nSe drastically induced the expression of rosmarinic acid synthase (RAS) and Hydroxy phenyl pyruvate reductase (HPPR) genes. Besides, the nSe, nZnO, or bulk counterparts influenced the activities of nitrate reductase in leaves and peroxidase in roots, depending on dose factor and compound form. The comparative physiological and molecular evidence on phytotoxicity and potential advantages of nSe, nZnO, and their bulk counterparts were served as a theoretical basis to be exploited in food, agricultural, and pharmaceutical industries.

ZnO nanoparticles increase photosynthetic pigments and decrease lipid peroxidation in soil grown cilantro (Coriandrum sativum)

The growth of the nanotechnology industry has raised concerns about its environmental impacts. In particular, the effect on terrestrial plants, which are the primary producers of the global food chain, is widely debated. In this study, cilantro plants (Coriandrum sativum) were cultivated for 35 days in soil amended with ZnO nanoparticles (N ZnO), bulk ZnO (B ZnO) and ZnCl₂ (ionic/I Zn) at 0-400 mg/kg. Photosynthetic pigments, lipid peroxidation, ¹NMR-based metabolic, and ICP-based metallomic profiles were evaluated. All Zn compounds increased the chlorophyll content by at least 50%, compared to control. Only N ZnO at 400 mg/kg decreased lipid peroxidation by 70%. ¹NMR data showed that all compounds significantly changed the carbinolic-based compounds, compared with control. Highest root and shoot uptake of Zn was observed at B 400 and I 100, respectively. Results of this study corroborates that N ZnO at a concentration <400 mg/kg improved photosynthesis pigments and the defense response in cilantro plants cultivated in organic soil.

Finding the conditions for the beneficial use of ZnO nanoparticles towards plants-A review

Zinc oxide nanoparticles (ZnO NPs) have a wide range of applications in cosmetics, electrical, and optical industries. The wide range of applications of ZnO NPs, especially in personal care products, suggest they can reach major environmental matrices causing unforeseen effects. Recent literature has shown conflicting findings regarding the beneficial or detrimental effects of ZnO NPs towards terrestrial biota. In this review we carried out a comprehensive survey about beneficial, as well as detrimental aspects, of the ZnO NPs exposure toward various terrestrial plants. A careful scrutiny of the literature indicates that at low concentrations (about 50 mg/kg), ZnO NPs have beneficial effects on plants. Conversely, at concentrations above 500 mg/kg they may have detrimental effects, unless there is a deficiency of Zn in the growing medium. This review also remarks the critical role of the biotic and abiotic factors that may elevate or ameliorate the impact of ZnO NPs in terrestrial plants.

Maghemite Nanoparticles Acts as Nanozymes, Improving Growth and Abiotic Stress Tolerance in Brassica napus

Yttrium doping-stabilized γ-Fe₂O₃ nanoparticles were studied for its potential to serve as a plant fertilizer and, through enzymatic activity, support drought stress management. Levels of both hydrogen peroxide and lipid peroxidation, after drought, were reduced when γ-Fe₂O₃ nanoparticles were delivered by irrigation in a nutrient solution to Brassica napus plants grown in soil. Hydrogen peroxide was reduced from 151 to 83 μM g^-1 compared to control, and the malondialdehyde formation was reduced from 36 to 26 mM g^-1. Growth rate of leaves was enhanced from 33 to 50% growth compared to fully fertilized plants and SPAD-measurements of chlorophyll increased from 47 to 52 suggesting improved agronomic properties by use of γ-Fe₂O₃ nanoparticles as fertilizer as compared to chelated iron.

Potentials of engineered nanoparticles as fertilizers for increasing agronomic productions

Development and application of new types of fertilizers using innovative nanotechnology are one of the potentially effective options of significantly enhancing the global agricultural productions needed to meet the future demands of the growing population. Indeed, the review of available literature indicates that some engineered nanomaterials can enhance plant-growth in certain concentration ranges and could be used as nanofertilizers in agriculture to increase agronomic yields of crops and/or minimize environmental pollution. This article summarizes this type of nanomaterials under four categories: macronutrient nanofertilizers, micronutrient nanofertilizers, nutrient-loaded nanofertilizers, and plant-growth-enhancing nanomaterials. Each category is discussed respectively with reference to nanomaterials' chemical composition, particle size, concentrations applied, benefited plant species, plant incubation methods, and plant-growth enhancement aspects and the rates. The importance, research directions, and research requirements of each nanofertilizer category for achieving sustainable agriculture are also specifically examined. Finally, this review suggests that development of N and P macronutrient nanofertilizers is a high research and development priority both for food production and environmental protection.