Voltammetric quantification, spectroscopic, and DFT studies on the binding of the antineoplastic drug Azacitidine with DNA

In this study, experimental studies were carried out to explore the action mechanism of the anti-cancer drug Azacitidine on the double-stranded DNA (dsDNA). The drug binding constant (Kb) was found to be 4.13 ± 0.23 × 105 M-1 using voltammetric measurements and 1.67 ± 0.24 × 105 M-1 using the fluorescence spectroscopy. Both values are close to the values of 2.04 ± 0.30 × 105 M-1 for deoxyguanosine (dGuO) and 1.23 ± 0.30 × 105 M-1 for deoxyadenosine (dAdo). In the displacement studies, the ethidium bromide, strong DNA intercalator, was replaced by the Azacitidine, hence caused a decrease on the fluorescence emission intensity. In thermal denaturation studies, the increase of 8.60 °C in the melting temperature upon introduction of the Azacitidine into the dsDNA solution cleary indicated intercalation binding mode of the drug. The experimental and theoretical IR spectra of Azacitidine, dsDNA and their H-bonded complex were confirmed the Azacitidine's intercalation ability to induce cytotoxicity. We also developed a method for the detection of Azacitidine at low concentrations using the differential pulse voltammetry (DPV). The peak current decreases in the oxidation signals of the deoxyguanosine obtained voltammetrically upon the interaction of Azacitidine and dsDNA allowed a sensitive determination of Azacitidine in pH 4.80 acetate buffer. A linear dependence of the deoxyguanosine oxidation signals was observed within the range of 2-20 µM Azacitidine, with a limit of detection (LOD) 0.62 µM.

Filament-based 3D-printing of placebo dosage forms using brittle lipid-based excipients

In order to expand the limited portfolio of available polymer-based excipients for fabricating three-dimensional (3D) printed pharmaceutical products, Lipid-based excipients (LBEs) have yet to be thoroughly investigated. The technical obstacle of LBEs application is, however their crystalline nature that renders them very brittle and challenging for processing via 3D-printing. In this work, we evaluated the functionality of LBEs for filament-based 3D-printing of oral dosage forms. Polyglycerol partial ester of palmitic acid and polyethylene glycols monostearate were selected as LBEs, based on their chemical structure, possessing polar groups for providing hydrogen-bonding sites. A fundamental understanding of structure-function relationship was built to screen the critical material attributes relevant for both extrusion and 3D-printing processes. The thermal behavior of lipids, including the degree of their supercooling, was the critical attribute for their processing. The extrudability of materials was improved through different feeding approaches, including the common powder feeding and a devised liquid feeding setup. Liquid feeding was found to be more efficient, allowing the production of filaments with high flexibility and improved printability. Filaments with superior performance were produced using polyglycerol ester of palmitic acid. In-house designed modifications of the utilized 3D-printer were essential for a flawless processing of the filaments.

Pharmaceutical applications of powder-based binder jet 3D printing process - A review

Pharmaceutical applications of the 3D printing process have recently matured, followed by the FDA approval of Spritam, the first commercial 3D printed dosage form. Due to being a new technology in the conventional dosage formulation field, there is still a dearth of understanding in the 3D printing process regarding the effect of the raw materials on the printed dosage forms and the plausibility of using this technology in dosage development beyond the conventional ways. In this review, the powder-based binder jet 3D printing (BJ3DP) process and its pharmaceutical applications have been discussed, along with a perspective of the formulation development step. The recent applications of BJ3DP in pharmaceutical dosage development, the advantages, and limitations have further been discussed here. A discussion of the critical formulation parameters that need to be explored for the preformulation study of the solid oral dosage development using the BJ3DP process is also presented.

Correlated quantification using microbiological and electrochemical assays for roxithromycin determination in biological and pharmaceutical samples

Microbiological and electrochemical assays, applying the cylinder-plate and differential pulse voltammetry as techniques, are reported for the quantitative determination of roxithromycin in serum and solid pharmaceutical form. The microbiological assay is based upon the inhibitory effect of this drug on the strain Bacillus subtilis ATCC 9372 used as the test microorganism. Linearity of the calibration curve was observed over the concentration range of 8.37-83.70 μg mL^-1, with relative standard deviation values less than 5.0%. The electrochemical behavior of roxithromycin was studied at a graphite screen-printed electrode modified with graphene by using cyclic voltammetry and differential pulse voltammetry. The current value of the oxidative peak obtained for roxithromycin at 0.65 V vs. Ag/AgCl in 0.03 mol L^-1 phosphate buffer solution (pH 7.0) with a scan rate of 0.1 V^-1 is a linear function of the concentration in a range of 4.19-83.70 μg mL^-1 (5-100 μmol L^-1). A comparative study was carried out and both methods were applied for the determination of roxithromycin in solid dosage forms and spiked serum. The bioassay results of human serum samples were in accordance with the electrochemical ones (R² = 0.988, P < 0.001), and the Bland-Altman method also showed good agreement between the values obtained by both procedures. Moreover, the statistical comparison indicated that there was no significant difference between the proposed techniques regarding both accuracy and precision.

Earth-friendly spectrophotometric methods for simultaneous determination of ledipasvir and sofosbuvir: Application to average content and uniformity of dosage unit testing

Simple, rapid, sensitive, accurate, precise and earth-friendly spectrophotometric methods were developed for the simultaneous analysis of ledipasvir (LED) and sofosbuvir (SOF) without interference of both sunset yellow dye and copovidone excipients (the most probable interferents) in their combined dosage form. These proposed methods were based on measurement of LED in synthetic mixtures and combined dosage form by first derivative (¹D) spectrophotometry at 314 nm over the concentration range of 2-50 μg mL^-1 with coefficient of determination (R²) > 0.9999, mean percentage recovery of 99.98 ± 0.62. On the other hand, SOF in synthetic mixtures and combined dosage form was determined by five methods. Method I is based on the use of ¹D spectrophotometry at 274.2 nm (zero crossing point of LED). Method II involves the application of conventional dual wavelength method (DW) at the absolute difference between SOF zero order amplitudes at 261 nm (λ_max of SOF) and 364.7 nm. At these wavelengths, the absolute difference between LED zero order amplitudes was observed to equal zero. Method III depends on isosbestic point method (ISP) in which the total concentration of both drugs was measured at isosbestic point at 262.7 nm. Concentration of SOF could be obtained by subtraction of LED concentration. While, method IV depends on absorbance correction method (absorption factor method), which is based on determination of SOF concentration at 262.7 nm (λ_ISP) and LED at 333 nm (λ_max of LED). Finally, method V depends on absorbance ratio method (Q-analysis) in which 262.7 nm (λ_ISP) and 261 nm (λ_max of SOF) were selected to determine SOF concentration. The linearity range for all methods for SOF determination was 2-50 μg mL^-1 with coefficient of determination (R²) > 0.9999. Methods I, II & III were also applied for determination of SOF concentration in single dosage form. Their mean percentage recoveries were 100.35 ± 1.85, 99.97 ± 0.54 and 100.03 ± 0.49, for the three methods respectively. The proposed methods were validated according to international conference of harmonization (ICH) requirements and statistically compared to published reference methods. The ANOVA test confirmed that there is no significant differences between the proposed methods, and can be used for routine analysis of LED and SOF in commercial tablets. These developed methods were applied to estimate the average content and uniformity of dosage unit for LED/SOF combined dosage form and SOF single dosage form according to British pharmacopeia (BP) requirements.

A Simple and Specific Stability- Indicating RP-HPLC Method for Routine Assay of Adefovir Dipivoxil in Bulk and Tablet Dosage Form

A simple and reliable stability-indicating RP-HPLC method was developed and validated for analysis of adefovir dipivoxil (ADV).The chromatographic separation was performed on a C₁₈ column using a mixture of acetonitrile-citrate buffer (10 mM at pH 5.2) 36:64 (%v/v) as mobile phase, at a flow rate of 1.5 mL/min. Detection was carried out at 260 nm and a sharp peak was obtained for ADV at a retention time of 5.8 ± 0.01 min. No interferences were observed from its stress degradation products. The method was validated according to the international guidelines. Linear regression analysis of data for the calibration plot showed a linear relationship between peak area and concentration over the range of 0.5-16 μg/mL; the regression coefficient was 0.9999and the linear regression equation was y = 24844x-2941.3. The detection (LOD) and quantification (LOQ) limits were 0.12 and 0.35 μg/mL, respectively. The results proved the method was fast (analysis time less than 7 min), precise, reproducible, and accurate for analysis of ADV over a wide range of concentration. The proposed specific method was used for routine quantification of ADV in pharmaceutical bulk and a tablet dosage form.

Stability indicating RP-HPLC method development and validation for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form

The objective of the present work is to develop stability indicating high-performance liquid chromatographic method for the simultaneous determination of aminexil and minoxidil in pharmaceutical dosage form. The chromatographic separation was achieved with BDS Hypersil C18 column (250 mm×4.6 mm×5 μ) as stationary phase and phosphate buffer and acetonitrile (78:22) as mobile phase. The method was employed by using a flow rate of 1.1 mL/min kept at 30°C. The detection wavelength was kept at 238 nm by using photo-diode array detector. The retention times of the aminexil and minoxidil were found to be 2.3 min and 3.9 min, respectively. The method developed was validated in accordance with ICH guidelines with respect to the stability indicating capacity of the method including system suitability, accuracy, precision, linearity, range, limit of detection, limit of quantification and robustness. The linearity responses of aminexil and minoxidil were found to be in the concentration ranges of 18.75-112.5 μg/mL and 25-150 μg/mL, respectively. The LOD and LOQ values for aminexil were found to be 0.31 and 0.92 μg/mL and minoxidil were found to be 0.03 and 0.10 μg/mL respectively. The percentage recoveries for both the drugs were found in the range of 98-101%. This method is accurate, precise and sensitive; hence, it can be employed for routine quality control of aminexil and minoxidil in pharmaceutical industries and drug testing laboratories.

Simultaneous determination of nortriptyline hydrochloride and fluphenazine hydrochloride in microgram quantities from low dosage forms by liquid chromatography-UV detection

A novel method for the simultaneous high-performance liquid chromatographic determination of nortriptyline hydrochloride and fluphenazine hydrochloride was developed and validated. Fluvastatin sodium was used as internal standard. The determination was performed on a Hypersil Gold C₈ column (250 mm × 4.6 mm i.d., 5 μm particle size) at 25 °C; the mobile phase, consisting of a mixture of formic acid (0.1 M, pH 2.16)-methanol (33:67, v/v), was delivered at a flow rate of 1.1 mL/min and detector wavelength at 251 nm. The retention time of nortriptyline, fluphenazine and fluvastatin was found to be 5.11, 8.05 and 11.38 min, respectively. Linearity ranges were 5.0–1350.0 and 10.0–1350.0 μg/mL with limit of detection values of 0.72 and 0.31 μg/mL, for nortriptyline and fluphenazine, respectively. Results of assay and recovery studies were statistically evaluated for its accuracy and precision. Correlation coefficients (r²) of the regression equations were greater than 0.999 in all cases. According to the validation results, the proposed method was found to be specific, accurate, precise and could be applied to the simultaneous quantitative analysis of nortriptyline and fluphenazine.