High-efficiency and economical uranium extraction from seawater with easily prepared supramolecular complexes

Developing effective adsorbents for uranium extraction from natural seawater is strategically significant for the sustainable fuel supply of nuclear energy. Herein, stable and low-cost supramolecular complexes (PA-bPEI complexes) were facilely constructed through the assembly of phytic acid and hyperbranched polyethyleneimine based on the multiple modes of electrostatic interaction and hydrogen bonding. The PA-bPEI complexes exhibited not only high uptake (841.7 mg g-1) and selectivity (uranium/vanadium selectivity = 84.1) toward uranium but also good antibacterial ability against biofouling. Mechanism analysis revealed that phosphate chelating groups and amine assistant groups coordinated the uranyl ions together with a high affinity. To be more suitable for practical applications, powdery PA-bPEI complexes were compounded with sodium alginate to fabricate various macroscopic adsorbents with engineered forms, which achieved an extraction capacity of 9.0 mg g-1 in natural seawater after 50 days of testing. Impressively, the estimated economic cost of the macroscopic adsorbent for uranium extraction from seawater ($96.5 ∼ 138.1 kg-1 uranium) was lower than that of all currently available uranium adsorbents. Due to their good uranium extraction performance and low economic cost, supramolecular complex-based adsorbents show great potential for industrial uranium extraction from seawater.

New insight into the mechanism of biofouling-resistant thiazole-linked covalent organic frameworks for selective uranium capture from seawater

The extraction of uranium from seawater is crucial for the sustainable production of nuclear fuel. Traditional amidoxime-functionalized adsorbents suffer from competitive adsorption of vanadium ion and biofouling. These challenges motivate the development of novel adsorbents for selective uranium extraction from seawater. Herein, four kinds of thiazole-linked covalent organic frameworks (COFs) were investigated to harvest uranium from seawater. The selectivity and anti-biofouling performance were systematically investigated through the molecular dynamics (MD) simulations. Driven by the pore size sieving effect and electrostatic interaction, the Ca2UO2(CO3)3 complex and vanadate anions were selectively separated by different COFs in special areas. On one hand, benefits from the small steric partition factor, the Ca2UO2(CO3)3 complex can stick on the surface of COFs. On the other hand, the dispersive negatively and positively charged areas of studied COFs work as potential binding sites for the Ca2UO2(CO3)3 complex and vanadate anions, respectively. Moreover, an analysis of pulling force and desorption time between uranium and vanadium ions further confirmed the selectivity of various thiazole-linked COFs. The anti-biofouling property was comparatively investigated by dynamic trajectory and solvent accessible surface area. Our outcomes illustrate that the hydroxyl and zwitterionic groups in the thiazole-linked COFs endow their strong surface hydrations to resist marine biofouling. In particular, the TpBdsaPa is identified as a promising candidate due to charge dispersed zwitterionic group as well as remarkable anti-biofouling ability. The present study sheds an atomic-level understanding of the thiazole-linked COFs for selective uranium uptaking from seawater, which will provide aid to design novel adsorbent with highly selective uranium extraction capacity and strong anti-biofouling property.

Significantly enhanced uranium extraction by intelligent light-driven nanorobot catchers with precise controllable moving trajectory

Uranium, as the most essential resource for nuclear power production, provides 13% of global electricity demand, has attracted considerable attention. However, it is still a great challenge for uranium extraction from natural water like salt lakes as the background of high salinity and low concentration (3.3 ∼ 330 ppb). Meanwhile, current uranium extraction strategies are generally focus on extraction capacity or selectivity but neglect to enhance extraction rate. In this work, we designed a novel kind of NIR-driven intelligent nanorobots catchers (MSSA-AO) with amidoxime as claws for uranium capture, which showed almost 100% extraction rate and an ultrafast extraction rate. Importantly, high extraction capacity (221.5 mg g-1) and selectivity were taken into consideration as well as good regeneration performance. Furthermore, amidoxime NRCs boosted in extraction amount about 16.7% during the first 5 min with self-driving performance. Overall, this work suggests a new strategy for ultrafast extraction of uranium from natural water with low abundance selectively by self-propelled NRCs, showing great possibility in outdoor application and promising for meeting huge energy needs globally.

Fe-MMT/WO3 composites for chemical and photocatalysis synergistic reduction of uranium (VI)

The preparation of Fe-MMT/WO3 composites by the hydrothermal method has been explored in this study for the construction of a chemical and photocatalytic catalyst for the reduction of U (VI). This research found that the visible light absorption and reduction potential of the Fe-MMT/WO3 composites were relatively superior compared to Fe-MMT and WO3 alone. Based on an evaluation of the performance of the Fe-MMT/WO3 composites under visible light irradiation, it was discovered that they had greater uranium extraction capacity, where the maximum extraction capacity of U (VI) was determined to be 1862.69 mg g-1, with removal efficiency reaching 93.32%. To investigate the electron transfer and U (VI) to U (IV) reduction mechanisms after the composite, XPS and DFT calculations were conducted. Results showed that Fe (II) is converted to a higher state Fe (III) and WO3 produce photoelectrons which together reduce U (VI) to U (IV). Moreover, the photoelectrons partially transferred to Fe-MMT with low reduction potential to reduce Fe (III) to Fe (II), allowing iron cycling during uranium extraction to be achieved.

Recent developments and challenges in uranium extraction from seawater through amidoxime-functionalized adsorbents

As per statistical estimations, we have only around 100 years of uranium life in terrestrial ores. In contrast, seawater has viable uranium resources that can secure the future of energy. However, to achieve this, environmental challenges need to be overcome, such as low uranium concentration (3.3 ppb), fouling of adsorbents, uranium speciation, oceanic temperature, and competition between elements for the active site of adsorbent (such as vanadium which has a significant influence on uranium adsorption). Furthermore, the deployability of adsorbent under seawater conditions is a gigantic challenge; hence, leaching-resistant stable adsorbents with good reusability and high elution rates are extremely needed. Powdered (nanostructured) adsorbents available today have limitations in fulfilling these requirements. An increase in the grafting density of functional ligands keeping in view economic sustainability is also a major obstacle but a necessity for high uranium uptake. To cope with these challenges, researchers reported hundreds of adsorbents of different kinds, but amidoxime-based polymeric adsorbents have shown some remarkable advantages and are considered the benchmark in uranium extraction history; they have a high affinity for uranium because of electron donors in their structure, and their amphoteric nature is responsible for effective uranium chelation under a wide range of pH. In this review, we have mainly focused on recent developments in uranium extraction from seawater through amidoxime-based adsorbents, their comparative analysis, and problematic factors that are needed to be considered for future research.

A biomass fiber adsorbent grafted with phosphate/amidoxime for efficient extraction of uranium from seawater by synergistic effect

There are approximately 4 billion tons of uranium in the ocean, which is unmatched by the surface. Nevertheless, it's very challenging to extract uranium from the ocean due to the exceedingly low concentration of uranium in the ocean (about 3.3 μg L^-1) as well as high salinity level. Current methods are often limited by selectivity, sustainability, economics, etc. Herein, phosphoric acid group and amidoxime group were grafted to skin collagen fibers through " initiated access" to design a new uranium extraction material, abbreviated as CGPA. Through laboratory simulation experiments, it is concluded that the maximum adsorption capacity of CGPA for uranium reaches 263.86 mg g^-1. It has high adsorption, selectivity, and reusability for uranium. In the actual seawater extraction experiment, CGPA obtained 29.64 μg of uranium after extracting 10.0 L of seawater, and the extraction rate was 90.1%. The adsorbent has excellent effects in kinetics, selectivity, extraction capacity, renewability, etc. In the extraction of uranium from seawater, and is an economically feasible and industrially expandable adsorbent.

High-efficiency uranium extraction from seawater by low-cost natural protein hydrogel

Utilization of uranium resource in seawater are highly possible to meet the growth demands for the sustainable development of nuclear energy industry. Bio-adsorbents exhibit high performance in terms of adsorption selectivity, equilibrium speed, and environmental friendliness, while the high fabrication cost hinders their practical application. In this study, a low-cost soy protein isolate (SPI) is used to fabricate adsorbent named SPI hydrogel for uranium extraction. This is the first report on applying bio-adsorbents derived from low-cost natural proteins for uranium extraction. The SPI hydrogel showed high uranium adsorption capacity of 53.94 mg g^-1 in simulated nuclear wastewater and 5.29 mg g^-1 is achieved in natural seawater, which is higher than all currently available adsorbents based on non-modified natural biomolecules. The amino and oxygen-containing groups are identified as the functional groups for uranyl binding by providing four oxygen and two nitrogen atoms to form equatorial coordination with uranyl, which guarantees the high binding selectivity and affinity to uranyl ions. The low cost for accessing the raw material together with the environmental friendliness, high salt tolerance, high uranium adsorption ability, and high selectivity to uranium, make SPI hydrogel a promising adsorbent for uranium extraction from seawater and nuclear wastewater.

Intrinsically morphological effect of perovskite BaTiO3 boosting piezocatalytic uranium extraction efficiency and mechanism investigation

Developing a convenient, efficient and eco-friendly approach for the recovery of U(VI) ion is a key measure to solve the environmental problems arising from the utilization of nuclear energy. Herein, the high efficiency of uranium extraction is realized by the piezo property of perovskite BaTiO₃, revealing the intrinsically morphological engineering effect on the piezocatalytic performance. Especially, BaTiO₃ nanowires (BTO NWs) exhibit not only an excellent piezocatalytic activity with U(VI) extraction rate of 96.8% in a UO₂(NO₃)₂ aqueous solution compared to 71.3% of BaTiO₃ nanoparticles (BTO NPs), but also a promising piezocatalyst for U extraction in a real U-mining wastewater with various pH ranges. Piezo response force microscopy and finite elemental simulation show that the piezo response of BTO NWs is much higher than BTO NPs. Additionally, some factors (pH, various ions, different powers) are explored on piezocatalytic efficiency for U(VI) extraction. The results from electron spin resonance and the charge/radical capture experiments confirm that the active species (e^-, •O^2-, •OH) stemmed from the piezo induction of BTO NWs and BTO NPs in the piezocatalytic U(VI) reduction process. The present work reveals the structure-performance correlation during piezocatalysis and highlights the crucial role of piezocatalysis in dealing with environmental problems.

Phosphorylation improved the competitive U/V adsorption on chitosan-based adsorbent containing amidoxime for rapid uranium extraction from seawater

A novel chitosan-based porous composite adsorbent with multifunctional groups, such as phosphoric acid, amidoxime, and quaternary ammonium groups, was prepared to improve the adsorption rate and competitive uranium‑vanadium adsorption of amidoxime group adsorbents. The maximum uranium adsorption capacity of PACNC was 962.226 mg g^-1 at 308 K and pH = 7. The maximum adsorption rate constant of PACNC for uranium was 2.83E-2 g mg^-1 min^-1, which is 2.38 times that of ACNC (1.19E-2 g mg^-1 min^-1). Moreover, the adsorption equilibrium time was shortened from 300 (ACNC) to 50 (PACNC) min. In simulated and real seawater, the K_d and adsorption capacity of PACNC for uranium were approximately 8 and 6.62 times those for vanadium, respectively. These results suggest that phosphorylation significantly improved the competitive adsorption of uranium‑vanadium and uranium adsorption rate. PACNC also exhibited good recycling performance and maintained stable adsorption capacity after five cycles. DFT calculations were used to analyze and calculate the possible co-complex structure of PACNC and uranium. The binding structure of phosphate and amidoxime is the most stable, and its synergistic effect effectively improves the competitive adsorption of uranium-vanadium of amidoxime. All the results demonstrated that PACNC has substantial application potential for uranium extraction from seawater.

Ultrafast extraction of uranium from seawater using photosensitized biohybrid system with bioinspired cascaded strategy

The highly effective utilization of uranium resources in global seawater is a viable method to satisfy the rising demands for fueling nuclear energy industry. Herein, inspired by the multi-mechanisms of the marine bacteria for uranium immobilization, CdS nanoparticles are deposited on the cell of marine bacterial strain Bacillus velezensis UUS-1 to create a photosensitized biohybrid system UUS-1/CdS. This system achieves high uranium extraction efficiency using a cascaded strategy, where the bacterial cells guarantee high extraction selectivity and the photosensitive CdS nanoparticles realize cascading photoreduction of high soluble U(VI) to low soluble U(IV) to enhance extraction capacity. As one of the fastest-acting adsorbents in natural seawater, a high extraction capacity for uranium of 7.03 mg g^-1 is achieved with an ultrafast extraction speed of 4.69 mg g^-1 d^-1. The cascaded strategy promisingly improves uranium extraction performance and pioneers a new direction for the design of adsorbents to extract uranium from seawater.

Cuttlefish ink loaded polyamidoxime adsorbent with excellent photothermal conversion and antibacterial activity for highly efficient uranium capture from natural seawater

Owing to the abundant uranium reserves in the oceans, the collection of uranium from seawater has aroused the widespread interest. Compared to the uranium extraction from ore, uranium collection from seawater is a more environmentally friendly strategy. The amidoxime (AO) functional group has been considered as one of the most efficient chelating groups for uranium capture. In this work, by drawing upon the photothermal character and antibacterial activity of cuttlefish ink, a cuttlefish ink loaded polyamidoxime (CI-PAO) membrane adsorbent is developed. Under one-sun illumination, the CI-PAO membrane shows a high extraction capacity of 488.76 mg-U/g-Ads in 500 mL 8 ppm uranium spiked simulated seawater, which is 1.24 times higher than PAO membrane. The adsorption rate of CI-PAO membrane is increased by 32.04%. Furthermore, exhibiting roughly 75% bacteriostatic rate in composite marine bacteria, the CI-PAO shows a dramatically antibacterial activity, which effectively prevents the functional sites on the adsorbent surface from being occupied by the biofouling blocks. After immersing in natural seawater for 4 weeks, light-irradiated CI-PAO gave high uranium uptake capacity of 6.17 mg-U/g-Ads. Hence, the CI-PAO membrane adsorbent can be considered as a potential candidate for the practical application for uranium extraction from seawater.

Electrochemical removal and recovery of uranium: Effects of operation conditions, mechanisms, and implications

Removing and recovering uranium (U) from U-mining wastewater would be appealing, which simultaneously reduces the adverse environmental impact of U mining activities and mitigates the depletion of conventional U resources. In this study, we demonstrate the application of a constant-voltage electrochemical (CVE) method for the removal and recovery of U from U-mining wastewater, in an ambient atmosphere. The effects of operation conditions were elucidated in synthetic U-bearing water experiments, and the cell voltage and the ionic strength were found to play important roles in both the U extraction kinetics and the operation cost. The mechanistic studies show that, in synthetic U-bearing water, the CVE U extraction proceeds exclusively via a single-step one-electron reduction mechanism, where pentavalent U is the end product. In real U-mining wastewater, the interference of water matrices led to the disproportionation of the pentavalent U, resulting in the formation of tetravalent and hexavalent U in the extraction products. The U extraction efficacy of the CVE method was evaluated in real U-mining wastewater, and results show that the CVE U extraction method can be efficient with operation costs ranging from $0.55/kgU ~ $64.65/kgU, with varying cell voltages from 1.0 V to 4.0 V, implying its feasibility from the economic perspective.

Waste feather fiber based high extraction capacity bio-adsorbent for sustainable uranium extraction from seawater

Recycling uranium from seawater is of great significance to the development of nuclear industry. However, due to high salinity and low uranium concentration in seawater, there are still many challenges in current seawater uranium extraction technology. In this study, waste feather fibers (FF) were used as raw materials to develop a phosphonate-functionalized feather fiber (FF-PT). The study on the adsorption performance shows that FF-PT have good adsorption and recycling performance for uranium. The study on the adsorption performance shows that FF-PT have good adsorption and recycling performance for uranium. The adsorption capacity reaches up to 342.5 mg·g^-1 in the 8 ppm uranium solution, and service life of at least 10 cycles were obtained. In addition, in the environment with high salinity and the coexistence of metal competitive ions, FF-PT also shows excellent selectivity, and it can reach 3.22 mg·g^-1 adsorption capacity after immersed in natural seawater for 30 days. Combined with the results of economic analysis, we believe that the FF-PT has broad application prospects in the industrialized uranium extraction from seawater.

Hydrous titanium oxide and bayberry tannin co-immobilized nano collagen fibrils for uranium extraction from seawater and recovery from nuclear wastewater

Extraction uranium from complicated aqueous solutions (seawater and nuclear wastewater) has been promoting the development of multi-functional adsorbents with high adsorption capacities and high selectivity. Here, we proposed a co-immobilization approach to preparing uranium adsorbents. Due to specific recognition and binding between functional groups, bayberry tannin (BT) and hydrous titanium oxide (HTO) were co-immobilized onto nano collagen fibrils (NCFs). The adsorption performances of NCFs-HTO-BT to uranium were systematically investigated in two aqueous systems, including nuclear wastewater and seawater. Results proved that NCFs-HTO-BT possessed the remarkable adsorption capacities and affinities for uranium in wastewater (393.186 mg g^-1) and spiked seawater (14.878 mg g^-1) with the uranium concentration of 320 mg g^-1 and 8 mg g^-1, respectively. Based on characteristic analysis of the adsorbent before and after uranium adsorption, the hydroxyl groups of HTO, the adjacent phenolic hydroxyl groups of BT, and nitrogen-containing and oxygen-containing functional groups of NCFs were active sites for uranium adsorption.

Stalagmites in karst cave inspired construction: lotus root-type adsorbent with porous surface derived from CO2-in-water Pickering emulsion for selective and ultrafast uranium extraction

Simultaneous construction of porous and hollow adsorbent, especially from gas-in-water Pickering emulsion (PE) reactor, is vital for improving mass transfer kinetics and uptake amount. Inspired by the formation process of stalagmites in karst cave, amino and amidoxime bifunctionalized lotus root-type microsphere with porous surface (NH₂@AO-PLRMS) is prepared by the silica nanoparticles (SPs)-stabilized CO₂-in-water Pickering emulsion reactor and subsequent two-step grafting polymerization. The important roles of SPs acting as Pickering emulsifier, surface pore-forming agent, and adjusting internal lotus root structure are confirmed. Lotus root-type pores are dependent on the interface intensity and the permeability for compressed CO₂ bubbles in PE droplets. Benefitting from the lotus root-type structure and abundant affinity sites, the maximum uranium adsorption capacity of NH₂@AO-PLRMS is 1214.5 mg·g^-1 at 298 k, and an ultrafast uptake process can be achieved in the first 30 min. Both thermodynamic and kinetic studies indicate a spontaneous, entropy increased, and exothermic chemisorption process, and the synergies of amidoxime and amino groups can enhance the adsorption selectivity. Remarkably, NH₂@AO-PLRMS displays a high uranium adsorption capacity and desorption efficiency after seven cycles. These findings provide a way to obtain adsorbents with enhanced uranium extraction performance from gas-in-water PE reactor.

Nanocellulose aerogel for highly efficient adsorption of uranium (VI) from aqueous solution

Cellulose nanofibers (CNFs) aerogel was prepared via simple covalent crosslinking and freeze-drying method. The porous cellulose aerogel possessed high specific surface area and high metal-chelating capacity, which showed fast adsorption kinetics and high adsorption capacity (440.60 mg g^-1) in static uranium adsorption process. In the dynamic filtration system, the maximum adsorption capacity reached 194 mg g^-1 with the initial concentration of 10 mg L^-1. In addition, the CNFs aerogel possessed excellent selectivity and good regeneration ability for uranium adsorption. The integrated analyses of attenuated total reflection Fourier transform infrared (ATR-FTIR), X-Ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS) suggested that the predominant UO₂²⁺ species formed inner-sphere surface complexes with two active carboxyl groups in the coordination model. This strategy may provide a sustainable route for development of efficient biomass-based adsorbents for selective uranium removal from aqueous solution.

Polyguanidine-modified adsorbent to enhance marine applicability for uranium recovery from seawater

The marine applicability of adsorbents intended for recovering uranium from seawater is crucial. For such applicability, the materials must exhibit anti-biofouling properties, seawater pH adaptability (pH~8), and salt tolerance. Extracting uranium from seawater is a long-term project; hence, biofouling, high salt concentrations, and weak alkaline environments negatively affect the adsorption of uranium and damage the recovered materials. Most studies on the extraction of uranium from seawater focus on increasing the adsorption capacity of the employed adsorbent, while its marine applicability is neglected. In the present study, three types of guanidine polymer (GP)-modified acrylic fibers were prepared to investigate the impact of the introduced structure on the marine applicability of the fibers. After screening, the introduction of polyhexamethylene biguanidine (PHMB) is observed to produce PAO-PHMB-A, characterized by excellent marine applicability. The enhanced properties include high antimicrobial activity (10⁹ CFU/mL, 99.71%), good salt tolerance, and optimal adsorption at a pH of 8. Owing to the synergistic effect of its functional groups, the PAO-PHMB-A material exhibits excellent adsorption performance (525.89 mg/g), as well as high selectivity and durability. More importantly, long-term marine tests revealed that PAO-PHMB-A shows a remarkable uranium adsorption capacity (30 d, 3.19 mg/g) and excellent antibacterial activity. Considering its excellent marine applicability and good adsorption performance, the PAO-PHMB-A material developed in this work could serve as a potential adsorbent for engineering applications associated with uranium recovery from seawater.

In-situ synthesis of uranyl-imprinted nanocage for selective uranium recovery from seawater

Adaptive coordination structure is vital for selective uranium extraction from seawater. By strategy of molecular imprinting, uranyl is introduced into the  m ultivariate metal-organic framework (MOF) during the synthesis process to guide the  in-situ  construction of proper nanocage structure for targeting uranyl binding. Except for  the  coordination between uranium with four oxygen from the materials, the axial oxygen of uranyl also forms hydrogen bonds with hydrogen from the phenolic hydroxyl group, which enhances the binding affinity of the material to uranyl. Attributing to the high binding affinity, the adsorbent shows high uranium binding selectivity to uranyl against not only the interfering metal ions, but also the carbonate group that coordinates with uranyl to form [UO 2 (CO) 3 ] 4 -  in seawater. In natural seawater, the adsorbent realizes a high uranium adsorption capacity of 7.35 mg g -1 , t ogether with an 18.38 times higher selectivity to vanadium.  Integrated into account the high reusability, this adsorbent is a promising alternative for uranium recovery from seawater.

Anchoring ZIF-67 particles on amidoximerized polyacrylonitrile fibers for radionuclide sequestration in wastewater and seawater

Capturing uranium (U(VI)) ions from wastewater and seawater is highly attractive for the environment and clean energy with the increasing deficiency of land sources. Howbeit, the massive volume of water and the ultralow concentration of U(VI) pose a substantial challenge to the industrial application. Accordingly, we have synthesized a novel organic-inorganic hybrid adsorbent through in-situ growing MOF particles on electrospun polyacrylonitrile fibers (PAN) followed by modifing with amidoxime groups to form amidoximed PAN/ZIF-67 (AOPAN/ZIF) hybrid fibers. In such fibers, the N atoms from imidazole and amidoxime can improve the adsorption performance synergistically in a wide pH range, which is favorable for capturing U(VI) under nuclear wastewater and seawater. As a result, the AOPAN/ZIF fibers exhibit high adsorption amount of 498.4 mg g^-1 in U(VI) contaminated aqueous solution at pH 4. Furthermore, the adsorption amount of U(VI) reached 2.03 mg g^-1 in natural seawater after 36 d, which implies that the AOPAN/ZIF fibers may promote the development of U(VI) recovery.

Mussel-inspired anti-biofouling and robust hybrid nanocomposite hydrogel for uranium extraction from seawater

A major challenge of uranium extraction from seawater (UES) is to effectively block the biofouling without destroying the ecological balance, especially prevent the attachment of macroalgae on the surface of the adsorbent. Herein, a robust montmorillonite-polydopamine/polyacrylamide nanocomposite hydrogel is reported by a two-step method, including PDA intercalation MMT and further free radical polymerization with AM monomers. The interpenetrating structure of hydrogel lead to high water permeability with the swelling ratio of 51, which could fully facilitate the internal accessible sites exposure and increase the uranium diffusion. As a result, a high adsorption capacity of 44 mg g^-1 was achieved in lab-scale dynamic adsorption. Most importantly, the prepared anti-biofouling hydrogel adsorbents display excellent anti-adhesion ability towards Nitzschia after 8 days contact. The adsorption capacity of uranium can reach 2130 μg g^-1 in algae-contained simulated seawater. This hydrogel also exhibited a long service life of acceptable mechanical strength and adsorption capacity after at least 6 adsorption-desorption cycles. This new anti-biofouling nanocomposite hydrogel shows great potential as a new generation adsorbent for UES.