Identification of the monolayer thickness difference in a mechanically exfoliated thick flake of hexagonal boron nitride and graphite for van der Waals heterostructures

Exfoliated flakes of layered materials, such as hexagonal boron nitride (hBN) and graphite with a thickness of several tens of nanometers, are used to construct van der Waals heterostructures. A flake with a desirable thickness, size, and shape is often selected from many exfoliated flakes placed randomly on a substrate using an optical microscope. This study examined the visualization of thick hBN and graphite flakes on SiO2/Si substrates through calculations and experiments. In particular, the study analyzed areas with different atomic layer thicknesses in a flake. For visualization, the SiO2 thickness was optimized based on the calculation. As an experimental result, the area with different thicknesses in a hBN flake showed different brightness in the image obtained using an optical microscope with a narrow band-pass filter. The maximum contrast was 12% with respect to the difference of monolayer thickness. In addition, hBN and graphite flakes were observed by differential interference contrast (DIC) microscopy. In the observation, the area with different thicknesses exhibited different brightnesses and colors. Adjusting the DIC bias had a similar effect to selecting a wavelength using a narrow band-pass filter.&#xD.

Single-shot quantitative phase imaging as an extension of differential interference contrast microscopy

Various studies have been conducted to obtain quantitative phase information based on differential interference contrast (DIC) microscopy. As one such attempt, we propose in this study a single-shot quantitative phase imaging (QPI) method by combining two developments. First, an add-on optical system to a commercialized DIC microscope was developed to perform quantitative phase gradient imaging (QPGI) with single image acquisition using a polarization camera. Second, an algorithm was formulated to reconstitute QPI from the obtained QPGI by reducing linear artifacts, which arise in simply integrated QPGI images. To demonstrate the applicability of the developed system in cell biology, the system was used to measure various cell lines and compared with fluorescence microscopy images of the same field of view. Consistent with previous studies, nucleoli and lipid droplets can be imaged by the system with greater optical path lengths (OPL). The results also implied that combining fluorescence microscopy and the developed system might be more informative for cell biology research than using these methods individually. Exploiting the single-shot performance of the developed system, time-lapse imaging was also conducted to visualize the dynamics of intracellular granules in monocyte-/macrophage-like cells. Our proposed approach may accelerate the implementation of QPI in standard biomedical laboratories.

Resolving Single-Nanoconstruct Dynamics during Targeting and Nontargeting Live-Cell Membrane Interactions

This paper describes how differences in the dynamics of targeting and nontargeting constructs can provide information on nanoparticle (NP)-cell interactions. We probed translational and rotational dynamics of functionalized Au nanostar (AuNS) nanoconstructs interacting with cells in serum-containing medium. We found that AuNS with targeting ligands had a larger dynamical footprint and faster rotational speed on cell membranes expressing human epidermal growth factor receptor 2 (HER-2) receptors compared to that of AuNS with nontargeting ligands. Targeting and nontargeting nanoconstructs displayed distinct membrane dynamics despite their similar protein adsorption profiles, which suggests that targeted interactions are preserved even in the presence of a protein corona. The high sensitivity of single-NP dynamics can be used to compare different nanoconstruct properties (such as NP size, shape, and surface chemistry) to improve their design as delivery vehicles.

Single-particle Correlation Study: Polarization-dependent Differential Interference Contrast Imaging of Two-dimensional Gold Nanoplates

Questions surrounding the optical properties of two-dimensional (2D) triangular single gold nanoplates (AuNPs) remain largely unanswered. Herein, a scanning-electron microscopy-correlated single-particle study was conducted to identify polarization-dependent optical properties of AuNPs under dark-field (DF) and differential interference contrast (DIC) microscopy. AuNPs with an aspect ratio of ∼3 showed a single broad DF scattering spectrum without separation of the two dipole and quadrupole resonance modes present in 2D AuNPs. Polarization-sensitive interference properties of the individual AuNPs were revealed through periodic changes in the intensities and types of DIC images obtained. A dipole resonance mode was found to mainly contribute to the polarization-sensitive interference properties of AuNPs. Furthermore, DIC polarization anisotropy allowed us to track the real-time orientation of a dipole resonance mode of a AuNP rotating on a live cell membrane.

Mapping optical path length and image enhancement using quantitative orientation-independent differential interference contrast microscopy

We describe the principles of using orientation-independent differential interference contrast (OI-DIC) microscopy for mapping optical path length (OPL). Computation of the scalar two-dimensional OPL map is based on an experimentally received map of the OPL gradient vector field. Two methods of contrast enhancement for the OPL image, which reveal hardly visible structures and organelles, are presented. The results obtained can be used for reconstruction of a volume image. We have confirmed that a standard research grade light microscope equipped with the OI-DIC and 100 × / 1.3 NA objective lens, which was not specially selected for minimum wavefront and polarization aberrations, provides OPL noise level of ? 0.5 ?? nm and lateral resolution if ? 300 ?? nm at a wavelength of 546 nm. The new technology is the next step in the development of the DIC microscopy. It can replace standard DIC prisms on existing commercial microscope systems without modification. This will allow biological researchers that already have microscopy setups to expand the performance of their systems.

Vacuum-Ultraviolet Promoted Oxidative Micro Photoetching of Graphene Oxide

Microprocessing of graphene oxide (GO) films is of fundamental importance in fabricating graphene-based devices. We demonstrate the photoetching of GO sheets using vacuum-ultraviolet (VUV, λ = 172 nm) light under controlled atmospheric pressure. X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and differential interference contrast microscopy (DIC) studies revealed that the photoetching of GO films successfully proceeded in the regions exposed to VUV irradiation in the oxygen-containing atmosphere. Precise photoetching of the GO sheets was achieved at a vacuum pressure of 5 × 10(3) Pa with VUV light irradiation for 20 min. This was followed by VUV irradiation in a high vacuum (<10(-3) Pa) and sonication in water. The photoetched GO sheets then transformed into reduced GO (rGO) patterns. The minimum feature fabricated by this method was 2 μm wide lines aligned at an interval of 4 μm. This method provides a cost-effective way to fabricate rGO patterns with fewer boundaries between rGO sheets and offers a better integrity of rGO, which can be promising for further applications in micro mechanics, micro electrochemistry, optoelectronics, etc.

A combined light sheet fluorescence and differential interference contrast microscope for live imaging of multicellular specimens

We describe a microscope capable of both light sheet fluorescence microscopy and differential interference contrast microscopy (DICM). The two imaging modes, which to the best of our knowledge have not previously been combined, are complementary: light sheet fluorescence microscopy provides three-dimensional imaging of fluorescently labelled components of multicellular systems with high speed, large fields of view, and low phototoxicity, whereas differential interference contrast microscopy reveals the unlabelled neighbourhood of tissues, organs, and other structures with high contrast and inherent optical sectioning. Use of a single Nomarski prism for differential interference contrast microscopy and a shared detection path for both imaging modes enables simple integration of the two techniques in one custom microscope. We provide several examples of the utility of the resulting instrument, focusing especially on the digestive tract of the larval zebrafish, revealing in this complex and heterogeneous environment anatomical features, the behaviour of commensal microbes, immune cell motions, and more.

Quantification of cellular volume and sub-cellular density fluctuations: comparison of normal peripheral blood cells and circulating tumor cells identified in a breast cancer patient

Cancer metastasis, the leading cause of cancer-related deaths, is facilitated in part by the hematogenous transport of circulating tumor cells (CTCs) through the vasculature. Clinical studies have demonstrated that CTCs circulate in the blood of patients with metastatic disease across the major types of carcinomas, and that the number of CTCs in peripheral blood is correlated with overall survival in metastatic breast, colorectal, and prostate cancer. While the potential to monitor metastasis through CTC enumeration exists, the basic physical features of CTCs remain ill defined and moreover, the corresponding clinical utility of these physical parameters is unknown. To elucidate the basic physical features of CTCs we present a label-free imaging technique utilizing differential interference contrast (DIC) microscopy to measure cell volume and to quantify sub-cellular mass-density variations as well as the size of subcellular constituents from mass-density spatial correlations. DIC measurements were carried out on CTCs identified in a breast cancer patient using the high-definition (HD) CTC detection assay. We compared the biophysical features of HD-CTC to normal blood cell subpopulations including leukocytes, platelets (PLT), and red blood cells (RBCs). HD-CTCs were found to possess larger volumes, decreased mass-density fluctuations, and shorter-range spatial density correlations in comparison to leukocytes. Our results suggest that HD-CTCs exhibit biophysical signatures that might be used to potentially aid in their detection and to monitor responses to treatment in a label-free fashion. The biophysical parameters reported here can be incorporated into computational models of CTC-vascular interactions and in vitro flow models to better understand metastasis.

Still life: Pollen tube growth observed in millisecond resolution

Our recent work used novel methods to localize and track discrete vesicle populations in pollen tubes undergoing oscillatory growth. The results show that clathrin-dependent endocytosis occurs along the shank of the pollen tube, smooth vesicle endocytosis occurs at the tip, and exocytosis occurs in the subapical region. Here, growth of tobacco and lily pollen tubes is examined in greater temporal resolution using refraction-free high-resolution time-lapse differential interference contrast microscopy. Images were collected at 0.21 s intervals for 10 min, sequentially examined for millisecond details, compressed into video format and then examined for details of growth dynamics. The subapical growth zone is structurally fluid, with vesicle insertion into the plasma membrane, construction of new cell surface and cellular expansion. Incorporation of new membrane and wall materials causes localized disruption at the cell surface that precedes the start of the growth cycle by 3.44 +/- 0.39 s in tobacco, and 1.02 +/- 0.01 s in lily pollen tubes. Vesicle deposition increases after the start of the growth cycle and supports expansion of the growth zone. Growth reorientation involves a shift in the position and angle of the growth zone. In summary, these results support a new model of pollen tube growth.

Orientation-independent differential interference contrast microscopy and its combination with an orientation-independent polarization system

We describe a combined orientation-independent differential interference contrast OI-DIC and polarization microscope and its biological applications. Several conventional DIC images were recorded with the specimen oriented in different directions followed by digital alignment and processing of the images. Then the obtained images are used for computation of the phase gradient magnitude and azimuth distribution and, further, the phase image. The OI-DIC images were obtained using optics having numerical aperture (NA) 1.4, thus achieving a level of resolution not previously achieved with phase contrast or interference microscope. The combined system yields two complementary phase images of thin optical sections of the specimen: distribution of refractive index and distribution of birefringence due to anisotropy of the cell structure. For instance, in a live dividing cell, the OI-DIC image clearly shows the detailed shape of the chromosomes, while the polarization image quantitatively depicts the distribution of birefringent microtubules in the spindle, both without any need for staining or other modifications of the cell. We present pseudo-color combined images of a crane fly spermatocyte at diakinesis and metaphase of meiosis I. Those images provide clear evidence that the proposed technique can reveal fine architecture and molecular organization in live cells without perturbation associated with staining or fluorescent labeling.