Epoxy resin-based root canal sealers: An integrative literature review

The correct obturation of the root canal system achieved by means of a core and a cement is essential for the success of endodontic treatment. There are several root canal cements (RCCs) on the market; however, because of their excellent characteristics, epoxy resin-based sealers (ERBSs) have been widely used. The main aim of this review was to analyze and integrate the available information on different ERBSs. An electronic search was performed in the PubMed and Scopus databases, using "epoxy resin" AND "root canal treatment", and "epoxy resin" AND "endodontics" as search terms. In general, ERBSs have good flow properties, film thickness, solubility, dimensional stability, sealing capacity, and radiopacity. They are also able to adhere to dentin while exhibiting low toxicity and some antibacterial effects. However, their main disadvantage is the lack of bioactivity and biomineralization capability. A large number of ERBSs are available on the market, and AH Plus keeps being the gold standard RCC. Yet, information on many of them is limited or non-existent, which could be due to the fact that some of them are relatively new. The latter emphasizes the need for relevant research on the physicochemical and biological properties of some ERBSs, with the aim of supporting their clinical use with sufficient evidence via prospective and long-term studies.

Comparison of push-out bond strength of endodontic sealers after root canal drying with different techniques

OBJECTIVES

An ideal endodontic sealer should bond to both dentin and root-filling material. This study aimed to assess the push-out bond strength (PBS) of mineral trioxide aggregate (MTA)-Fillapex, Endoseal MTA, AH26, and Sure-Seal Root to root dentin after root canal drying with different techniques.

MATERIALS AND METHODS

This in vitro study was conducted on 160 extracted mandibular premolars. After root canal preparation, the teeth were randomly divided into four groups (n = 40) of drying with ethanol, paper point, air vacuum, and control (wet canal). Each group was divided into four subgroups (n = 10) for use of AH26, Sure-Seal Root, MTA-Fillapex, and Endoseal MTA sealers. The mean PBS was measured by a universal testing machine. The mode of failure was determined under a stereomicroscope. Data were analyzed by the Kruskal-Wallis and Games-Howell tests.

RESULTS

The maximum mean PBS was equally recorded in ethanol and paper point groups, and was significantly higher than that of control and air vacuum groups (p < .001). In the use of AH26 sealer, the mean PBS in drying with ethanol was significantly higher than all other methods (p < .05). The mean PBS in drying with a paper point was also significantly higher compared with control and air vacuum methods (p < .05). In the use of Sure-Seal, the mean PBS in drying with a paper point was significantly higher than other methods (p < .05). The mean PBS in drying with ethanol was significantly higher than that in control and air vacuum methods (p < .001). In the use of MTA-Fillapex and Endoseal-MTA, the technique of drying had no significant effect on PBS. Adhesive and mixed failures were the most common in all drying groups.

CONCLUSIONS

Drying with ethanol and paper point enhanced the PBS of sealers to root dentin.

Influence of the use of chelating agents as final irrigant on the push-out bond strength of epoxy resin-based root canal sealers: A systematic review

This systematic review (PROSPERO - CRD42020150722) was performed to answer the following question: Does the use of chelating agents affect the dislodgment resistance of epoxy resin-based root canal sealers? A search was conducted in PubMed, EMBASE, Scopus, LILACS and Web of Science, hand searching of two endodontic journals and grey literature until September 2020. Extracted data included: teeth used, sample size, root canal preparation, irrigant, chelating solution, neutralisation solution, type of resin-based sealer and obturation approach, storage method and duration, root third and slice thickness, plunger dimension and loading direction and the push-out testing parameters and values. The search retrieved a total of 2.389 studies. After analysis, 12 studies fulfilled the eligibility criteria and were included. Most of the final irrigation protocols with chelating agents had a positive impact and promoted an improvement in the dislodgment resistance of epoxy resin-based sealers to the root dentin.

The effect of two calcium silicate-based and one epoxy resin-based root canal sealer on postoperative pain: a randomized controlled trial

AIM

To compare the effect of two calcium silicate-based (Endoseal MTA and EndoSequence BC Sealer) and an epoxy resin-based (AH Plus) root canal sealer on postoperative pain following single-visit root canal treatment on molar teeth.

METHODOLOGY

Patients (n = 90) having one first or second molar tooth diagnosed with asymptomatic irreversible pulpitis were randomly divided into three groups according to the sealer used (n = 30) and were treated by two endodontists having at least 10 years of experience. All patients received a single-visit root canal treatment. After the treatments, postoperative pain scores and analgesic intake were recorded at 6, 12, 24 and 48 h, and 3, 4, 5, 6 and 7 days. The data were analysed statistically using non-parametric Kruskal-Wallis tests (for the comparisons of the age and VAS scores), Friedman tests (for the assessments of the changes in pain scores over time), chi-squared tests (for the comparisons of categorical variables) and Spearman's correlation test (for the correlation assessments of the age and gender factors with postoperative pain; α = 0.05).

RESULTS

There were no significant differences amongst the groups in terms of postoperative pain at any time-points assessed (P > 0.05) nor for analgesic intake of patients amongst the groups (P > 0.05). Analgesic intake decreased significantly after 12 h in all groups (P < 0.05).

CONCLUSIONS

The sealers tested in this study were associated with similar levels of postoperative pain and were associated with a similar intake of analgesics.

Comparing dentinal tubule penetration of conventional and 'HiFlow' bioceramic sealers with resin-based sealer: An in vitro study

This study compared the depth and percentage of dentinal tubule penetration for single-cone (SC) and warm vertical (WV) obturation techniques with two different bioceramic sealers (BC Sealer [BCS], BC Sealer HiFlow [BCSHF]) and an epoxy resin-based sealer (2Seal easymiX). Fifty canals were filled with BCS, BCSHF or resin-based sealer (RBS). Teeth in BCS and BCSHF groups were filled with SC or WV techniques, and teeth in the control group (RBS) filled with WV technique only. The roots were sectioned at 3 mm and 6 mm levels from the apex and evaluated with a confocal laser microscope. There was significantly greater depth and percentage of sealer penetration at the 6 mm section compared to 3 mm (P < 0.05). No statistically significant difference was found in sealer type or obturation technique at the examined levels (P > 0.05). In conclusion, dentinal tubule penetration was similar comparing BC Sealer, BC Sealer HiFlow and RBS using SC and WV techniques.

Temperature changes affect the rheological properties of a silicone-based and an epoxy resin-based root canal sealers

To evaluate temperature changes on the rheological properties (setting time and complex viscosity (η*)) of GuttaFlow Bioseal (GFB) and AH Plus Jet (AHPJ). Rheological measurements were performed in oscillating mode at the strain amplitude and angular frequency of 0.01% and 10 rad s^-1 , respectively. Each sealer (n = 5) was tested running a temperature ramp (rapid increase to 80°C, 1 min constantly at 80°C, and slower decrease to 37°C). Control groups (n = 5) were tested at a constant temperature of 37°C. Kolmogorov-Smirnov and one-way ANOVA (P < 0.05) statistical tests were performed. The temperature ramp reduced setting time of GFB (24.85 to 4.45 min) (P < 0.05), but did not alter that of AHPJ (P > 0.05). GFB exhibited an increased η*, whereas the AHPJ η* was decreased when heated (P < 0.05). Rheological properties of sealers were negatively affected by temperature changes.

Efficacy and Cytotoxicity of Binary Mixtures as Root Canal Filling Solvents

OBJECTIVES

This study reports the efficacy of two solvent mixtures on the dissolution of gutta-percha and AH Plus sealer, together with the cytotoxicity.

METHODS

Methyl ethyl ketone (MEK), orange oil, tetrachloroethylene, MEK/tetrachloroethylene (1:1), MEK/orange oil (1:1), and chloroform (control) were tested. Twelve groups (n = 15) of standardized stainless-steel molds filled with softened gutta-percha cones and twelve (n = 15) filled with AH Plus were immersed in the corresponding mixture or individual solvent, in an ultrasonic bath, for either 2 or 5 min. The effect of the solvents was assessed qualitatively by a topographical analysis (scanning electron microscopy) and chemical analysis (Fourier transform infrared spectroscopy), and quantitatively by a weight loss and viscoelastic property (dynamic mechanical analysis) evaluation. The cytotoxicity was assessed on MG63 human osteoblastic cells.

RESULTS

The mixtures did not show the formation of new compounds. Both presented significantly higher efficacies compared to their individual solvents, suggesting a synergistic effect. Their dissolution efficacy was similar to that of chloroform, showing high cytocompatibility.

CONCLUSIONS

The proposed strategy, incorporating ultrasound agitation and profiting from the synergy of adequate solvents, might enhance root canal cleanliness allowing a single-step procedure to dissolve gutta-percha and the sealer remnants, while assuring cytocompatibility with the periapical tissues.

Influence of the Calcium Hydroxide Intracanal Dressing on Dentinal Tubule Penetration of Two Root Canal Sealers

Objective

The aim of this study was to evaluate the effect of a calcium hydroxide (CH) dressing on the tubular penetration of two endodontic sealers, AH Plus (Dentsply Maillefer, Ballaigues, Switzerland) and MTA Fillapex (Angelus, Londrina, Brazil).

Methods

Seventy-two mandibular premolars with a single root canal were prepared with ProFile.04 rotary instruments (Dentsply Maillefer) and divided into four groups. In two groups, an intracanal CH dressing was placed for 15 days. The obturations were performed with lateral condensation of gutta-percha in combination with one of the tested sealers. The roots were transversely sectioned at the apical and middle levels. The percentage of sealer penetration in the root canal walls and the percentage of impregnated dentin area in the transverse sections were obtained using confocal laser scanning microscopy. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Games-Howell test.

Results

The CH dressing reduced the mean value of tubular penetration in the middle third of teeth obturated with AH Plus (P<0.01), whereas no difference was observed at the apical sections for both sealers.

Conclusion

The CH dressing did not interfere with the apical penetration of both tested sealers, however, decreased the tubular penetration in the middle third of the AH Plus root canal fillings. Overall, MTA Fillapex presented higher tubular penetration than AH Plus obturations.