Low Power Consuming Mode Switch Based on Hybrid-Core Vertical Directional Couplers with Graphene Electrode-Embedded Polymer Waveguides

We propose a mode switch based on hybrid-core vertical directional couplers with an embedded graphene electrode to realize the switching function with low power consumption. We designed the device with Norland Optical Adhesive (NOA) material as the guide wave cores and epoxy polymer material as cladding to achieve a thermo-optic switching for the E₁₁, E₂₁ and E₁₂ modes, where monolayer graphene served as electrode heaters. The device, with a length of 21 mm, had extinction ratios (ERs) of 20.5 dB, 10.4 dB and 15.7 dB for the E₂₁, E₁₂ and E₁₁ modes, respectively, over the C-band. The power consumptions of three electric heaters were reduced to only 3.19 mW, 3.09 mW and 2.97 mW, respectively, and the response times were less than 495 µs, 486 µs and 498 µs. Additionally, we applied such a device into a mode division multiplexing (MDM) transmission system to achieve an application of gain equalization of few-mode amplification among guided modes. The differential modal gain (DMG) could be optimized from 5.39 dB to 0.92 dB over the C-band, together with the characteristic of polarization insensitivity. The proposed mode switch can be further developed to switch or manipulate the attenuation of the arbitrary guided mode arising in the few-mode waveguide.

Flexible Antifreeze Zn-Ion Hybrid Supercapacitor Based on Gel Electrolyte with Graphene Electrodes

Zn-ion energy storage devices employing hydrogel electrolytes are considered as promising candidates for flexible and wearable electronics applications. This is because of their safe nature, low cost, and good mechanical characteristics. However, conventional hydrogel electrolytes face limitation at subzero temperatures. Herein, we report an antifreezing, safe, and nontoxic gel electrolyte based on the poly(vinyl alcohol) (PVA)/Zn/ethylene glycol system. The optimal gel electrolyte membrane exhibits a high ionic conductivity (15.03 mS cm^-1 at room temperature) and promising antifreezing performance (9.05 mS cm^-1 at -20 °C and 3.53 mS cm^-1 at -40 °C). Moreover, the antifreezing gel electrolyte can suppress the growth of Zn dendrites to display a uniform Zn plating/stripping behavior. Also, a flexible antifreezing Zn-ion hybrid supercapacitor fabricated with the optimum antifreezing gel electrolyte membrane exhibits excellent electrochemical properties. The supercapacitor possesses a high specific capacity of 247.7 F g^-1 at room temperature under a high working voltage of 2 V. It also displays an outstanding cyclic stability at room temperature. Moreover, the supercapacitor shows an extraordinary electrochemical behavior and cyclic stability over up to 30 000 cycles at -20 °C under a current load of 5 A g^-1, demonstrating its outstanding low-temperature electrochemical performance. Besides, the antifreezing supercapacitor device also offers high flexibility under different deformation conditions. Therefore, it is believed that this work provides a simplistic method of realizing the application of flexible antifreezing Zn-ion energy storage devices in a subzero-temperature environment.

Soft Wireless Bioelectronics and Differential Electrodermal Activity for Home Sleep Monitoring

Sleep is an essential element to human life, restoring the brain and body from accumulated fatigue from daily activities. Quantitative monitoring of daily sleep quality can provide critical feedback to evaluate human health and life patterns. However, the existing sleep assessment system using polysomnography is not available for a home sleep evaluation, while it requires multiple sensors, tabletop electronics, and sleep specialists. More importantly, the mandatory sleep in a designated lab facility disrupts a subject’s regular sleep pattern, which does not capture one’s everyday sleep behaviors. Recent studies report that galvanic skin response (GSR) measured on the skin can be one indicator to evaluate the sleep quality daily at home. However, the available GSR detection devices require rigid sensors wrapped on fingers along with separate electronic components for data acquisition, which can interrupt the normal sleep conditions. Here, we report a new class of materials, sensors, electronics, and packaging technologies to develop a wireless, soft electronic system that can measure GSR on the wrist. The single device platform that avoids wires, rigid sensors, and straps offers the maximum comfort to wear on the skin and minimize disruption of a subject’s sleep. A nanomaterial GSR sensor, printed on a soft elastomeric membrane, can have intimate contact with the skin to reduce motion artifact during sleep. A multi-layered flexible circuit mounted on top of the sensor provides a wireless, continuous, real-time recording of GSR to classify sleep stages, validated by the direct comparison with the standard method that measures other physiological signals. Collectively, the soft bioelectronic system shows great potential to be working as a portable, at-home sensor system for assessing sleep quality before a hospital visit.

Probing Electrified Liquid-Solid Interfaces with Scanning Electron Microscopy

Electrical double layers play a key role in a variety of electrochemical systems. The mean free path of secondary electrons in aqueous solutions is on the order of a nanometer, making them suitable for probing ultrathin electrical double layers at solid-liquid electrolyte interfaces. Employing graphene as an electron-transparent electrode in a two-electrode electrochemical system, we show that the secondary electron yield of the graphene-liquid interface depends on the ionic strength and concentration of the electrolyte and the applied bias at the remote counter electrode. These observations have been related to polarization-induced changes in the potential distribution within the electrical double layer and demonstrate the feasibility of using scanning electron microscopy to examine and map electrified liquid-solid interfaces.

Investigation of the Ionic Liquid Graphene Electric Double Layer in Supercapacitors Using Constant Potential Simulations

In this work, we investigate the effect of the cation structure on the structure and dynamics of the electrode–electrolyte interface using molecular dynamics simulations. A constant potential method is used to capture the behaviour of 1-ethyl-3-methylimidazolium bis (trifluoromethane)sulfonimide ([C2mim][NTf2]) and butyltrimethylammonium bis(trifluoromethane) sulfonimide ([N4,1,1,1][NTf2]) ionic liquids at varying potential differences applied across the supercapacitor. We find that the details of the structure in the electric double layer and the dynamics differ significantly, yet the charge profile and capacitance do not vary greatly. For the systems considered, charging results in the rearrangement and reorientation of ions within ∼1 nm of the electrode rather than the diffusion of ions to/from the bulk region. This occurs on timescales of O(10 ns) for the ionic liquids considered, and depends on the viscosity of the fluid.

Unidirectional Real-Time Photoswitching of Diarylethene Molecular Monolayer Junctions with Multilayer Graphene Electrodes

We fabricate and characterize vertical molecular junctions consisting of self-assembled monolayers of diarylethene (DAE) contacted by a multilayer graphene (MLG) electrode on the top and gold on the bottom. The DAE molecular junctions show two stable electrical states, a closed state (high conductance) or an open state (low conductance), which are created upon illumination with UV or visible light, respectively. For the Au-DAE-MLG junction structure, we observe that the current levels between the two conductance states are separated by 2 orders of magnitude. However, in a real-time measurement, we observe only unidirectional switching behavior from the open to the closed state.

Structure-Activity Relationships of Hierarchical Three-Dimensional Electrodes with Photosystem II for Semiartificial Photosynthesis

Semiartificial photosynthesis integrates photosynthetic enzymes with artificial electronics, which is an emerging approach to reroute the natural photoelectrogenetic pathways for sustainable fuel and chemical synthesis. However, the reduced catalytic activity of enzymes in bioelectrodes limits the overall performance and further applications in fuel production. Here, we show new insights into factors that affect the photoelectrogenesis in a model system consisting of photosystem II and three-dimensional indium tin oxide and graphene electrodes. Confocal fluorescence microscopy and in situ surface-sensitive infrared spectroscopy are employed to probe the enzyme distribution and penetration within electrode scaffolds of different structures, which is further correlated with protein film-photoelectrochemistry to establish relationships between the electrode architecture and enzyme activity. We find that the hierarchical structure of electrodes mainly influences the protein loading but not the enzyme activity. Photoactivity is more limited by light intensity and electronic communication at the biointerface. This study provides guidelines for maximizing the performance of semiartificial photosynthesis and also presents a set of methodologies to probe the photoactive biofilms in three-dimensional electrodes.

Efficient Fabrication of Stable Graphene-Molecule-Graphene Single-Molecule Junctions at Room Temperature

We present a robust approach to fabricate stable single-molecule junctions at room temperature using single-layer graphene as nanoelectrodes. Molecular scale nano-gaps in graphene were generated using an optimized fast-speed feedback-controlled electroburning process. This process shortened the time for creating a single nano-gap to be less than one minute while keeping a yield higher than 97 %. To precisely control the gap position and minimize the effects of edge defects and the quantum confinement, extra-narrow grooves were pre-patterned in the graphene structures with oxygen plasma etching. Molecular junctions were formed by bridging the nano-gaps with amino-functionalized hexaphenyl molecules by taking advantage of chemical reactions between the amino groups at the two ends of the molecules and the carboxyl groups at the edges of graphene electrodes. Electronic transport measurements and transition voltage spectroscopy analysis verified the formation of single-molecule devices. First-principles quantum transport calculations show that the highest occupied molecular orbital of hexaphenyl is closer to the Fermi level of the graphene electrodes and thus the devices exhibit a hole-type transport characteristics. Some of these molecular devices remained stable up to four weeks, highlighting the potential of graphene nano-electrodes in the fabrication of stable single-molecule devices at room temperature.

Programmable Synaptic Metaplasticity and below Femtojoule Spiking Energy Realized in Graphene-Based Neuromorphic Memristor

Memristors with rich interior dynamics of ion migration are promising for mimicking various biological synaptic functions in neuromorphic hardware systems. A graphene-based memristor shows an extremely low energy consumption of less than a femtojoule per spike, by taking advantage of weak surface van der Waals interaction of graphene. The device also shows an intriguing programmable metaplasticity property in which the synaptic plasticity depends on the history of the stimuli and yet allows rapid reconfiguration via an immediate stimulus. This graphene-based memristor could be a promising building block toward designing highly versatile and extremely energy efficient neuromorphic computing systems.

Polyethylenimine Modified Graphene-Oxide Electrochemical Immunosensor for the Detection of Glial Fibrillary Acidic Protein in Central Nervous System Injury

Glial fibrillary acidic protein (GFAP) is as an intermediate filament protein expressed by certain cells in the central nervous system (CNS). GFAP has been recognized as a reliable biomarker of CNS injury. However, due to the absence of rapid and easy-to-use assays for the detection of CNS injury biomarkers, measuring GFAP levels to identify CNS injury has not attained widespread clinical implementation. In the present work, we developed a polyethylenimine (PEI) coated graphene screen-printed electrode and used it for highly sensitive immunosensing of GFAP. Covalent binding of GFAP antibody to the PEI-modified electrode surface along with electrochemical impedance spectroscopy was used for detecting the change in the electrical conductivity of the electrodes. A highly linear response was recorded for various GFAP concentrations. Quantitative, selective, and label-free detection was achieved in the dynamic range of 1 pg mL^-1 to 100 ng mL^-1 for GFAP spiked in phosphate buffer saline, artificial cerebrospinal fluid, and human blood serum. The performance of the immunosensor was further validated and correlated by testing samples with the commercially available enzyme-linked immunosorbent assay method. This functionalized electrode could be used clinically for rapid detection and monitoring of CNS injury.

Development of Annealing-Free, Solution-Processable Inverted Organic Solar Cells with N-Doped Graphene Electrodes using Zinc Oxide Nanoparticles

An annealing-free process is considered as a technological advancement for the development of flexible (or wearable) organic electronic devices, which can prevent the distortion of substrates and damage to the active components of the device and simplify the overall fabrication process to increase the industrial applications. Owing to its outstanding electrical, optical, and mechanical properties, graphene is seen as a promising material that could act as a transparent conductive electrode for flexible optoelectronic devices. Owing to their high transparency and electron mobility, zinc oxide nanoparticles (ZnO-NP) are attractive and promising for their application as charge transporting materials for low-temperature processes in organic solar cells (OSCs), particularly because most charge transporting materials require annealing treatments at elevated temperatures. In this study, graphene/annealing-free ZnO-NP hybrid materials were developed for inverted OSC by successfully integrating ZnO-NP on the hydrophobic surface of graphene, thus aiming to enhance the applicability of graphene as a transparent electrode in flexible OSC systems. Chemical, optical, electrical, and morphological analyses of ZnO-NPs showed that the annealing-free process generates similar results to those provided by the conventional annealing process. The approach was effectively applied to graphene-based inverted OSCs with notable power conversion efficiencies of 8.16% and 7.41% on the solid and flexible substrates, respectively, which promises the great feasibility of graphene for emerging optoelectronic device applications.

Electrical Neural Stimulation and Simultaneous in Vivo Monitoring with Transparent Graphene Electrode Arrays Implanted in GCaMP6f Mice

Electrical stimulation using implantable electrodes is widely used to treat various neuronal disorders such as Parkinson's disease and epilepsy and is a widely used research tool in neuroscience studies. However, to date, devices that help better understand the mechanisms of electrical stimulation in neural tissues have been limited to opaque neural electrodes. Imaging spatiotemporal neural responses to electrical stimulation with minimal artifact could allow for various studies that are impossible with existing opaque electrodes. Here, we demonstrate electrical brain stimulation and simultaneous optical monitoring of the underlying neural tissues using carbon-based, fully transparent graphene electrodes implanted in GCaMP6f mice. Fluorescence imaging of neural activity for varying electrical stimulation parameters was conducted with minimal image artifact through transparent graphene electrodes. In addition, full-field imaging of electrical stimulation verified more efficient neural activation with cathode leading stimulation compared to anode leading stimulation. We have characterized the charge density limitation of capacitive four-layer graphene electrodes as 116.07-174.10 μC/cm² based on electrochemical impedance spectroscopy, cyclic voltammetry, failure bench testing, and in vivo testing. This study demonstrates the transparent ability of graphene neural electrodes and provides a method to further increase understanding and potentially improve therapeutic electrical stimulation in the central and peripheral nervous systems.

Ambipolar Graphene-Quantum Dot Hybrid Vertical Photodetector with a Graphene Electrode

A strategy to fabricate an ambipolar near-infrared vertical photodetector (VPD) by sandwiching a photoactive material as a channel film between the bottom graphene and top metal electrodes was developed. The channel length in the vertical architecture was determined by the channel layer thickness, which can provide an ultrashort channel length without the need for a high-precision manufacturing process. The performance of VPDs with two types of semiconductor layers, a graphene-PbS quantum dot hybrid (GQDH) and PbS quantum dots (QDs), was measured. The GQDH VPD showed better photoelectric properties than the QD VPD because of the high mobility of graphene doped in the channel. The GQDH VPD exhibited excellent photoresponse properties with a responsivity of 1.6 × 10⁴ A/W in the p-type regime and a fast response speed with a rise time of 8 ms. The simple manufacture and the promising photoresponse of the GQDH VPDs reveal that an easy and effective way to fabricate high-performance ambipolar photodetectors was developed.

Robust Molecular Anchoring to Graphene Electrodes

Recent advances in the engineering of picoscale gaps between electroburnt graphene electrodes provide new opportunities for studying electron transport through electrostatically gated single molecules. But first we need to understand and develop strategies for anchoring single molecules to such electrodes. Here, for the first time we present a systematic theoretical study of transport properties using four different modes of anchoring zinc-porphyrin monomer, dimer, and trimer molecular wires to graphene electrodes. These involve either amine anchor groups, covalent C-C bonds to the edges of the graphene, or coupling via π-π stacking of planar polyaromatic hydrocarbons formed from pyrene or tetrabenzofluorene (TBF). π-π stacked pyrene anchors are particularly stable, which may be advantageous for forming robust single-molecule transistors. Despite their planar, multiatom coupling to the electrodes, pyrene anchors can exhibit both destructive interference and different degrees of constructive interference, depending on their connectivity to the porphyrin wire, which makes them attractive also for thermoelectricity. TBF anchors are more weakly coupled to both the graphene and the porphyrin wires and induce negative differential conductance at finite source-drain voltages. Furthermore, although direct C-C covalent bonding to the edges of graphene electrodes yields the highest electrical conductance, electron transport is significantly affected by the shape and size of the graphene electrodes because the local density of states at the carbon atoms connecting the electrode edges to the molecule is sensitive to the electrode surface shape. This sensitivity suggests that direct C-C bonding may be the most desirable for sensing applications. The ordering of the low-bias electrical conductances with different anchors is as follows: direct C-C coupling > π-π stacking with the pyrene anchors > direct coupling via amine anchors > π-π stacking with TBF anchors. Despite this dependency of conductances on the mode of anchoring, the decay of conductance with the length of the zinc-porphyrin wires is relatively insensitive with the associated attenuation factor β lying between 0.9 and 0.11 Å^-1.

Mo1-xWxSe2-Based Schottky Junction Photovoltaic Cells

We developed Schottky junction photovoltaic cells based on multilayer Mo_1-xW_xSe₂ with x = 0, 0.5, and 1. To generate built-in potentials, Pd and Al were used as the source and drain electrodes in a lateral structure, and Pd and graphene were used as the bottom and top electrodes in a vertical structure. These devices exhibited gate-tunable diode-like current rectification and photovoltaic responses. Mo_0.5W_0.5Se₂ Schottky diodes with Pd and Al electrodes exhibited higher photovoltaic efficiency than MoSe₂ and WSe₂ devices with Pd and Al electrodes, likely because of the greater adjusted band alignment in Mo_0.5W_0.5Se₂ devices. Furthermore, we showed that Mo_0.5W_0.5Se₂-based vertical Schottky diodes yield a power conversion efficiency of ∼16% under 532 nm light and ∼13% under a standard air mass 1.5 spectrum, demonstrating their remarkable potential for photovoltaic applications.

Ultrafast, Broadband Photodetector Based on MoSe2/Silicon Heterojunction with Vertically Standing Layered Structure Using Graphene as Transparent Electrode

A MoSe2/Si heterojunction photodetector is constructed by depositing MoSe2 film with vertically standing layered structure on Si substrate. Graphene transparent electrode is utilized to further enhance the separation and transport of photogenerated carriers. The device shows excellent performance in terms of wide response spectrum of UV-visible-NIR, high detectivity of 7.13 × 1010 Jones, and ultrafast response speed of ≈270 ns, unveiling the great potential for the heterojunction for high-performance optoelectronic devices.

Highly Oriented Graphene Sponge Electrode for Ultra High Energy Density Lithium Ion Hybrid Capacitors

Highly oriented rGO sponge (HOG) can be easily synthesized as an effective anode for application in high-capacity lithium ion hybrid capacitors. X-ray diffraction and morphological analyses show that successfully exfoliated rGO sponge on average consists of 4.2 graphene sheets, maintaining its three-dimensional structure with highly oriented morphology even after the thermal reduction procedure. Lithium-ion hybrid capacitors (LIC) are fabricated in this study based on a unique cell configuration which completely eliminates the predoping process of lithium ions. The full-cell LIC consisting of AC/HOG-Li configuration has resulted in remarkably high energy densities of 231.7 and 131.9 Wh kg(-1) obtained at 57 W kg(-1) and 2.8 kW kg(-1). This excellent performance is attributed to the lithium ion diffusivity related to the intercalation reaction of AC/HOG-Li which is 3.6 times higher that of AC/CG-Li. This unique cell design and configuration of LIC presented in this study using HOG as an effective anode is an unprecedented example of performance enhancement and improved energy density of LIC through successful increase in cell operation voltage window.

Indium- and Platinum-Free Counter Electrode for Green Mesoscopic Photovoltaics through Graphene Electrode and Graphene Composite Catalysts: Interfacial Compatibility

The scarcity and noble indium and platinum (Pt) are important elements in photoelectric nanomaterials. Therefore, development of low cost alternative materials to meet different practical applications is an urgent need. Two-dimensional (2D) layered graphene (GE) with unique physical, mechanical, and electrical properties has recently drawn a great deal of attention in various optoelectronic fields. Herein, the large scale (21 cm × 15 cm) high-quality single layer graphene (SLG) and multilayer graphene on a flexible plastic substrate PET were controllably prepared through layer-by-layer (LBL) transfer using the thermal release adhesive transfer method (TRA-TM). Transmission and antibending performance based on PET/GE were superior to traditional PET/ITO. The square resistance of a nine-layer graphene electrode reached approximately 58 Ω. Combined with our newly developed and highly effective Fe3O4@RGO (reduced graphene oxide) catalyst, the power conversion efficiency of the dye-sensitized solar cell (DSC) using flexible PET/GE conductive substrate was comparable to that of the DSC using the PET/ITO substrate. The desirable performance of PET/GE/Fe3O4@RGO counter electrodes (low-cost indium- and platinum-free counter electrodes) is attributed to the interfacial compatibility between 2D graphene composite catalyst (Fe3O4@RGO) and 2D PET/GE conductive substrate. In addition, DSCs that use only PET/GE (without Fe3O4@RGO catalyst) as counter electrodes can also achieve a photocurrent density of 6.30 mA cm(-2). This work is beneficial for fundamental research and practical applications of graphene and graphene composite in photovoltaics, photocatalytic water splitting, supercapacitors.

Air-stable transport in graphene-contacted, fully encapsulated ultrathin black phosphorus-based field-effect transistors

The presence of direct bandgap and high mobility in semiconductor few-layer black phosphorus offers an attractive prospect for using this material in future two-dimensional electronic devices. However, creation of barrier-free contacts which is necessary to achieve high performance in black phosphorus-based devices is challenging and currently limits their potential for applications. Here, we characterize fully encapsulated ultrathin (down to bilayer) black phosphorus field effect transistors fabricated under inert gas conditions by utilizing graphene as source-drain electrodes and boron nitride as an encapsulation layer. The observation of a linear ISD-VSD behavior with negligible temperature dependence shows that graphene electrodes lead to barrier-free contacts, solving the issue of Schottky barrier limited transport in the technologically relevant two-terminal field-effect transistor geometry. Such one-atom-thick conformal source-drain electrodes also enable the black phosphorus surface to be sealed, to avoid rapid degradation, with the inert boron nitride encapsulating layer. This architecture, generally applicable for other sensitive two-dimensional crystals, results in air-stable, hysteresis-free transport characteristics.