Octafluoro-Substituted Phthalocyanines of Zinc, Cobalt, and Vanadyl: Single Crystal Structure, Spectral Study and Oriented Thin Films

In this work, octafluoro-substituted phthalocyanines of zinc, vanadyl, and cobalt (MPcF₈, M = Zn(II), Co(II), VO) were synthesized and studied. The structures of single crystals of the obtained phthalocyanines were determined. To visualize and compare intermolecular contacts in MPcF₈, an analysis of Hirshfeld surfaces (HS) was performed. MPcF₈ nanoscale thickness films were deposited by organic molecular beam deposition technique and their structure and orientation were studied using X-ray diffraction. Comparison of X-ray diffraction patterns of thin films with the calculated diffractograms showed that all three films consisted of a single crystal phase, which corresponded to a phase of single crystals. Only one strong diffraction peak corresponding to the plane (001) was observed on the diffraction pattern of each film, which indicated a strong preferred orientation with the vast majority of crystallites oriented with a (001) crystallographic plane parallel to the substrate surface. The effect of the central metals on the electronic absorption and vibrational spectra of the studied phthalocyanines as well as on the electrical conductivity of their films is also discussed.

Bifunctional Oxygen Electrocatalysis on Mixed Metal Phthalocyanine-Modified Carbon Nanotubes Prepared via Pyrolysis

Non-precious-metal catalysts are promising alternatives for Pt-based cathode materials in low-temperature fuel cells, which is of great environmental importance. Here, we have investigated the bifunctional electrocatalytic activity toward the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) of mixed metal (FeNi; FeMn; FeCo) phthalocyanine-modified multiwalled carbon nanotubes (MWCNTs) prepared by a simple pyrolysis method. Among the bimetallic catalysts containing nitrogen derived from corresponding metal phthalocyanines, we report the excellent ORR activity of FeCoN-MWCNT and FeMnN-MWCNT catalysts with the ORR onset potential of 0.93 V and FeNiN-MWCNT catalyst for the OER having EOER = 1.58 V at 10 mA cm-2. The surface morphology, structure, and elemental composition of the prepared catalysts were examined with scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The FeCoN-MWCNT and FeMnN-MWCNT catalysts were prepared as cathodes and tested in anion-exchange membrane fuel cells (AEMFCs). Both catalysts displayed remarkable AEMFC performance with a peak power density as high as 692 mW cm-2 for FeCoN-MWCNT.

Manipulation of Molecular Spin State on Surfaces Studied by Scanning Tunneling Microscopy

The adsorbed magnetic molecules with tunable spin states have drawn wide attention for their immense potential in the emerging fields of molecular spintronics and quantum computing. One of the key issues toward their application is the efficient controlling of their spin state. This review briefly summarizes the recent progress in the field of molecular spin state manipulation on surfaces. We focus on the molecular spins originated from the unpaired electrons of which the Kondo effect and spin excitation can be detected by scanning tunneling microscopy and spectroscopy (STM and STS). Studies of the molecular spin-carriers in three categories are overviewed, i.e., the ones solely composed of main group elements, the ones comprising 3d-metals, and the ones comprising 4f-metals. Several frequently used strategies for tuning molecular spin state are exemplified, including chemical reactions, reversible atomic/molecular chemisorption, and STM-tip manipulations. The summary of the successful case studies of molecular spin state manipulation may not only facilitate the fundamental understanding of molecular magnetism and spintronics but also inspire the design of the molecule-based spintronic devices and materials.

Screen-Printed Electrodes Modified with Metal Phthalocyanines: Characterization and Electrocatalysis in Chlorinated Media

Metal phthalocyanines are well-known sensing phases with applications in different scientific fields due to their interesting properties. Detailed characterization by Raman spectroscopy was performed in order to study the shifting of the vibrational bands related to the coordination sphere of each metal phthalocyanine. In this work, a study involving the use of screen-printed electrodes (SPEs) with various metal phthalocyanines to electrochemically detect and quantify chlorine (Cl₂) gas is presented. The Cl₂ gas was generated in-situ via oxidation of the chloride present in form of aqueous salt solutions. The developed method offers not only the possibility to quantify chlorine, but also to discriminate among several chlorinated species due to the changes observed in the voltammetric profiles associated with the interaction between the specie assayed and the phthalocyanine metallic center. Optimization of detecting parameters was also performed to apply this procedure for the quantification of chlorine generated from commercial chlorine tablets. The development of this proof of concept shows interesting possibilities and easy-to-use applications with novel on metal phthalocyanines based SPE sensors.

Local aromaticity mapping in the vicinity of planar and nonplanar molecules

We report on nucleus-independent magnetic shielding (NICS) scans over the centers of six- and five-membered rings in selected metal phthalocyanines (MPc) and fullerene C60 for more accurate characterization of local aromaticity in these compounds. Detailed tests were conducted on model aromatic molecules including benzene, pyrrole, indole, isoindole, and carbazole and subsequently applied to H₂ Pc, ZnPc, Al(OH)Pc, and CuPc. Similar behavior of three selected magnetic probes, Bq, ³ He, and ⁷ Li⁺ , approaching perpendicularly the ring centers, was observed. For better visualization of shielding zone over the centers of aromatic rings, we introduced a simple mathematical procedure: the first and second derivatives of scan curves with respect to magnetic probe position enabled their additional examination. It allowed an easier localization of curve minimum and discrimination between areas in space varying by the magnetic field magnitude and to illustrate local aromaticity of two different kinds of rings in MPc with better resolution. Our results supported earlier reports on very low aromaticity indexes of pyrrole ring incorporated into MPc and significant aromaticity of the central macrocycle. No direct dependence between harmonic oscillator model of aromaticity and NICS was observed. Instead, a correlation between position of scan curve minimum and its magnitude were observed. In addition, the NICS values and ³ He chemical shifts in the middle of neutral C60 and C60^6- anion agreed well with the reported experimental NMR values for He@C60 and He@C60^6- .

Fluorinated Metal Phthalocyanines: Interplay between Fluorination Degree, Films Orientation, and Ammonia Sensing Properties

In this work, the sensor response of MPcFx (M = Cu, Co, Zn; x = 0, 4, 16) films toward gaseous NH₃ (10⁻50 ppm) was studied by a chemiresistive method and compared to that of unsubstituted MPc films to reveal the effects of central metals and F-substituents on the sensing properties. A combination of atomic force microscopy and X-ray diffraction techniques have been used to elucidate the structural features of thin MPcFx films deposited by organic molecular beam deposition. It has been shown that the sensor response of MPcF₄ films to ammonia is noticeably higher than that of MPc films, which is in good correlation with the values of binding energy between the metal phthalocyanine and NH₃ molecules, as calculated by the density functional theory (DFT) method. At the same time, in contrast to the DFT calculations, MPcF16 demonstrated the lesser sensor response compared with MPcF₄, which appeared to be connected with the different structure and morphology of their films. The ZnPcF₄ films were shown to exhibit a sensitivity to ammonia up to concentrations as low as 0.1 ppm, and can be used for the selective detection of ammonia in the presence of some reducing gases and volatile organic compounds. Moreover, the ZnPcF₄ films can be used for the detection of NH₃ in the gas mixture simulating exhaled air (N₂ 76%, O₂ 16%, H₂O 5%, and CO₂ 3%).

Generalized Synthesis of Ultrathin Cobalt-Based Nanosheets from Metallophthalocyanine-Modulated Self-Assemblies for Complementary Water Electrolysis

The development of effective approaches for preparing large-area, self-standing, ultrathin metal-based nanosheets, which have proved to be favorable for catalytic applications such as water electrolysis, is highly desirable but remains a great challenge. Reported herein is a simple and versatile strategy to synthesize ultrathin Co₃ O₄ and CoP NSs consisting of close-packed nanoparticles by pyrolyzing cobalt(II) phthalocyanine/graphene oxide (CoPc/GO) assemblies in air and subsequent topotactic phosphidation while preserving the graphene-like morphology. The strong π-π stacking interactions between CoPc and GO, and the inhibiting effect of the tetrapyrrole-derived macrocycle for grain growth during the catalytic carbon gasification contribute to the NSs forming. The resulting homologous Co₃ O₄ and CoP NSs display outstanding catalytic activity in alkaline media toward the oxygen evolution reaction and the hydrogen evolution reaction, respectively, ascribed to the richly exposed active sites, and the expedited electrolyte/ion transmission path. The integrated asymmetrical two-electrode configuration also presents a superior cell voltage of 1.63 V at 10 mA cm^-2 for overall water splitting, accompanied with the excellent durability during long-term cycling. Further evidences validate that this strategy is appropriate to fabricate graphene-like ultrathin NSs of many other metal oxides, such as Fe₂ O₃ , NiO, MoO₃ , and mixed-metal oxides, for various applications.

Molecular Crystal Engineering: Tuning Organic Semiconductor from p-type to n-type by Adjusting Their Substitutional Symmetry

Focusing on the bottleneck of molecularly engineered organic semiconductors, a breakthrough is made to tune the electronic properties of organic semiconductors from p-type to n-type by using fluorinated metal phthalocyanines as examples. The experimentally observed p-type to n-type transition characteristics of single-crystal field-effect devices result from a combination of extrinsic and intrinsic properties of materials with different fluoridation substitution.

Single-Molecule Imaging of Iron-Phthalocyanine-Catalyzed Oxygen Reduction Reaction by in Situ Scanning Tunneling Microscopy

We report herein an in situ electrochemical scanning tunneling microscopy (ECSTM) investigation of iron-phthalocyanine (FePc)-catalyzed oxygen reduction reaction (ORR). A highly ordered FePc adlayer is revealed on a Au(111) electrode. The center ions in the FePc adlayer show uniform high contrast in an oxygen-saturated electrolyte, which is attributed to the formation of an FePc-O2 complex. In situ STM results reveal the sharp contrast change upon shifting the electrode potential to trigger the ORR. Theoretical simulation has supplied further evidence for the contrast difference of the adsorbed FePc species.