Fatigue resistance of monolithic and multilayer zirconia crowns using veneer layering or CAD-on technique

This study aims to evaluate the fatigue resistance of monolithic zirconia (Yz) and multilayer ceramic structures using the CAD-on technique in different thicknesses. Fifty (N=50) standardized single crowns preparations were made in fiberglass-reinforced epoxy resin (NEMA grade G10), digitalized, and restorations were machined in CAD-CAM, composing 5 groups (n= 10): Control: 1.5 mm (milled zirconia framework + manual layered porcelain); Yz monolithic 1.5 mm; Yz monolithic 1.0 mm; CAD-on 1.5 mm; and CAD-on 1.0 mm (milled zirconia framework 0.5 mm thickness bonded by a low fuse ceramic to a milled lithium disilicate layer of 1.0 mm or 0.5 mm, respectively). The G10 bases were conditioned with 10% hydrofluoric acid; the crowns were air abraded with 110 μm alumina particles; and then luted onto each other with self-adhesive resin cement. A cyclic fatigue test was performed (initial load: 400N for 10,000 cycles, frequency of 20 Hz, step size of 200N) until failure, and the data was submitted to a survival statistical analysis. No failures were observed at Yz monolithic 1.5 mm. High and similar performance was observed for Cad-On groups and Yz monolithic 1.0 mm. The control group depicted the worst behavior. The Weibull modulus of CAD-on 1.5 mm was higher than the control while being similar to the other conditions. Both the monolithic systems and the CAD-on technique showed high and similar fatigue fracture behavior and survival rates, which were also higher than the control bilayer system. Both systems reduced the occurrence of delamination failures, making them suitable for clinical use.

Environment-Interactive Programmable Deformation of Electronically Innervated Synergistic Fluorescence-Color/Shape Changeable Hydrogel Actuators

Utilization of life-like hydrogels to replicate synergistic shape/color changeable behaviors of living organisms has been long envisaged to produce robust functional integrated soft actuators/robots. However, it remains challenging to construct such hydrogel systems with integrated functionality of remote, localized and environment-interactive control over synergistic discoloration/actuation. Herein, inspired by the evolution-optimized bioelectricity stimulus and multilayer structure of natural reptile skins, electronically innervated fluorescence-color switchable hydrogel actuating systems with bio-inspired multilayer structure comprising of responsive fluorescent hydrogel sheet and conductive Graphene/PDMS film with electrothermal effect is presented. Such rational structure enables remote control over synergistic fluorescence-color and shape changes of the systems via the cascading "electrical trigger-Joule heat generation-hydrogel shrinkage" mechanism. Consequently, local/sequential control of discoloration/actuation are achieved due to the highly controllable electrical stimulus in terms of amplitude and circuit design. Furthermore, by joint use with acoustic sensors, soft chameleon robots with unprecedented environment-interactive adaptation are demonstrated, which can intelligently sense environment signals to adjust their color/shape-changeable behaviors. This work opens previously unidentified avenues for functional integrated soft actuators/robots and will inspire life-like intelligent systems for versatile uses.

Photonic crystals built by time in ancient Roman glass

Ancient glass objects typically show distinctive effects of deterioration as a result of environmentally induced physicochemical transformations of their surface over time. Iridescence is one of the distinctive signatures of aging that is most commonly found on excavated glass. In this work, we present an ancient glass fragment that exhibits structural color through surface weathering resulting in iridescent patinas caused by silica reprecipitation in nanoscale lamellae. This archaeological artifact reveals an unusual hierarchically assembled photonic crystal with extremely ordered nanoscale domains, high spectral selectivity, and reflectivity (~90%), that collectively behaves like a gold mirror. Optical characterization paired with nanoscale elemental analysis further underscores the high quality of this structure providing a window into this sophisticated natural photonic crystal assembled by time.

Plasmon modes inN-layer silicene structures

We investigate the plasmon properties inN-layer silicene systems consisting ofN, up to 6, parallel single-layer silicene (SLS) under the application of an out-of-plane electric field, taking into account the spin-orbit coupling within the random-phase approximation. Numerical calculations demonstrate thatNundamped plasmon modes, including one in-phase optical (Op) and (N- 1) out-of-phase acoustic (Ac) modes, continue mainly outside the single-particle excitation area of the system. As the number of layers increases, the frequencies of plasmonic collective excitations increase and can become much larger than that in SLS, more significant for high-frequency modes. The Op (Ac) plasmon mode(s) noticeably (slightly) decreases with the increase in the bandgap and weakly depends on the number of layers. We observe that the phase transition of the system weakly affects the plasmon properties, and as the bandgap caused by the spin-orbit coupling equal that caused by the external electric field, the plasmonic collective excitations and their broadening function in multilayer silicene behave similarly to those in multilayer gapless graphene structures. Our investigations show that plasmon curves in the system move toward that in SLS as the separation increases, and the impacts of this factor can be raised by a large number of layers in the system. Finally, we find that the imbalanced carrier density between silicene layers significantly decreases plasmon frequencies, depending on the number of layers.

3D-Printed Quasi-Cylindrical Bragg Reflector to Boost the Gain and Directivity of cm- and mm-Wave Antennas

We demonstrate a concept for a large enhancement of the directivity and gain of readily available cm- and mm-wave antennas, i.e., without altering any property of the antenna design. Our concept exploits the high reflectivity of a Bragg reflector composed of three bilayers made of transparent materials. The cavity has a triangular aperture in order to resemble the idea of a horn-like, highly directive antenna. Importantly, we report gain enhancements of more than 400% in relation to the gain of the antenna without the Bragg structure, accompanied by a highly directive radiation pattern. The proposed structure is cost-effective and easy to fabricate with 3D-printing. Our results are presented for frequencies within the conventional WiFi frequencies, based on IEEE 802.11 standards, thus, enabling easily implementation by non-experts and needing only to be placed around the antenna to improve the directivity and gain of the signal.

FEM Analysis of Various Multilayer Structures for CMOS Compatible Wearable Acousto-Optic Devices

Lately, wearable applications featuring photonic on-chip sensors are on the rise. Among many ways of controlling and/or modulating, the acousto-optic technique is seen to be a popular technique. This paper undertakes the study of different multilayer structures that can be fabricated for realizing an acousto-optic device, the objective being to obtain a high acousto-optic figure of merit (AOFM). By varying the thicknesses of the layers of these materials, several properties are discussed. The study shows that the multilayer thin film structure-based devices can give a high value of electromechanical coupling coefficient (k2) and a high AOFM as compared to the bulk piezoelectric/optical materials. The study is conducted to find the optimal normalised thickness of the multilayer structures with a material possessing the best optical and piezoelectric properties for fabricating acousto-optic devices. Based on simulations and studies of SAW propagation characteristics such as the electromechanical coupling coefficient (k2) and phase velocity (v), the acousto-optic figure of merit is calculated. The maximum value of the acousto-optic figure of merit achieved is higher than the AOFM of all the individual materials used in these layer structures. The suggested SAW device has potential application in wearable and small footprint acousto-optic devices and gives better results than those made with bulk piezoelectric materials.

A Universal Approach for Controllable Synthesis of n-Specific Layered 2D Perovskite Nanoplates

2D perovskites with chemical formula A'₂ A_n-1 B_n X_3n+1 have recently attracted considerable attention due to their tunable optical and electronic properties, which can be attained by varying the chemical composition. While high color-purity emitting perovskite nanomaterials have been accomplished through changing the halide composition, the preparation of single-phase, specific n-layer 2D perovskite nanomaterials is still pending because of the fast nucleation process of nanoparticles. We demonstrate a facile, rational and efficacious approach to synthesizing single-phase 2D perovskite nanoplates with a designated n number for both lead- and tin-based perovskites through kinetic control. Casting carboxylic acid additives in the reaction medium promotes selective formation of the kinetic product-multilayer 2D perovskite-in preference to the single-layer thermodynamic product. For the n-specific layered 2D perovskites, decreasing the number of octahedral layers per inorganic sheet leads to an increase of photoluminescence energy, radiative decay rate, and a significant boost in photostability.

Femtosecond Laser-Induced Periodic Surface Structures on 2D Ti-Fe Multilayer Condensates

2D Ti-Fe multilayer preparation has been attracting increased interest due to its ability to form intermetallic compounds between metallic titanium and metallic iron thin layers. In particular, the TiFe compound can absorb hydrogen gas at room temperature. We applied femtosecond laser pulses to heat Ti-Fe multilayer structures to promote the appearance of intermetallic compounds and generate surface nanostructuring. The surface pattern, known as Laser Induced Periodic Surface Structures (LIPSS), can accelerate the kinetics of chemical interaction between solid TiFe and gaseous hydrogen. The formation of LIPSS on Ti-Fe multilayered thin films were investigated using of scanning electron microscopy, photo-electron spectroscopy and X-ray diffraction. To explore the thermal response of the multiple layered structure and the mechanisms leading to surface patterning after irradiating the compound with single laser pulses, theoretical simulations were conducted to interpret the experimental observations.

Deep Convolutional Mixture Density Network for Inverse Design of Layered Photonic Structures

Machine learning (ML) techniques, such as neural networks, have emerged as powerful tools for the inverse design of nanophotonic structures. However, this innovative approach suffers some limitations. A primary one is the nonuniqueness problem, which can prevent ML algorithms from properly converging because vastly different designs produce nearly identical spectra. Here, we introduce a mixture density network (MDN) approach, which models the design parameters as multimodal probability distributions instead of discrete values, allowing the algorithms to converge in cases of nonuniqueness without sacrificing degenerate solutions. We apply our MDN technique to inversely design two types of multilayer photonic structures consisting of thin films of oxides, which present a significant challenge for conventional ML algorithms due to a high degree of nonuniqueness in their optical properties. In the 10-layer case, the MDN can handle transmission spectra with high complexity and under varying illumination conditions. The 4-layer case tends to show a stronger multimodal character, with secondary modes indicating alternative solutions for a target spectrum. The shape of the distributions gives valuable information for postprocessing and about the uncertainty in the predictions, which is not available with deterministic networks. Our approach provides an effective solution to the inverse design of photonic structures and yields more optimal searches for the structures with high degeneracy and spectral complexity.

Complementary Metal-Oxide-Semiconductor Compatible Deposition of Nanoscale Transition-Metal Nitride Thin Films for Plasmonic Applications

Transition-metal nitrides have received significant interest for use within plasmonic and optoelectronic devices because of their tunability and environmental stability. However, the deposition temperature remains a significant barrier to widespread adoption through the integration of transition-metal nitrides as plasmonic materials within complementary metal-oxide-semiconductor (CMOS) fabrication processes. Binary, ternary, and layered plasmonic transition-metal nitride thin films based on titanium and niobium nitride are deposited using high-power impulse magnetron sputtering (HIPIMS) technology. The increased plasma densities achieved in the HIPIMS process allow thin films with high plasmonic quality to be deposited at CMOS-compatible temperatures of less than 300 °C. Thin films are deposited on a range of industrially relevant substrates and display-tunable plasma frequencies in the ultraviolet to visible spectral ranges. Strain-mediated tunability is discovered in layered films compared to that in ternary films. The thin film quality, combined with the scalability of the deposition process, indicates that HIPIMS deposition of nitride films is an industrially viable technique and can pave the way toward the fabrication of next-generation plasmonic and optoelectronic devices.

A Highly Sensitive Piezoresistive Pressure Sensor Based on Graphene Oxide/Polypyrrole@Polyurethane Sponge

In this work, polyurethane sponge is employed as the structural substrate of the sensor. Graphene oxide (GO) and polypyrrole (PPy) are alternately coated on the sponge fiber skeleton by charge layer-by-layer assembly (LBL) to form a multilayer composite conductive layer to prepare the piezoresistive sensors. The 2D GO sheet is helpful for the formation of the GO layers, and separating the PPy layer. The prepared GO/PPy@PU (polyurethane) conductive sponges still had high compressibility. The unique fragmental microstructure and synergistic effect made the sensor reach a high sensitivity of 0.79 kPa⁻¹. The sensor could detect as low as 75 Pa, exhibited response time less than 70 ms and reproducibility over 10,000 cycles, and could be used for different types of motion detection. This work opens up new opportunities for high-performance piezoresistive sensors and other electronic devices for GO/PPy composites.

Error Assessment and Mitigation Methods in Transient Radar Method

Transient Radar Method (TRM) was recently proposed as a novel contact-free method for the characterization of multilayer dielectric structures including the geometric details. In this paper, we discuss and quantify the intrinsic and systematic errors of TRM. Also, solutions for mitigating these problems are elaborated extensively. The proposed solution for error correction will be applied to quantify experimentally the thickness of several single-layer dielectric structures with thicknesses varying from larger to smaller than the wavelength. We will show how the error correction method allows sub-wavelength thickness measurements around λ/5.

Multilayer Polypyrrole Nanosheets with Self-Organized Surface Structures for Flexible and Efficient Solar-Thermal Energy Conversion

Converting solar energy into concentrated heat is very appealing for various applications. Polypyrrole (PPy) is known to possess excellent photothermal property with low thermal conductivity, and thus is an ideal candidate for solar-thermal energy conversion. However, solar-thermal materials based on PPy or other conducting polymers still exhibit limited energy conversion efficiency due to the lack of effective light-trapping schemes. Here, it is demonstrated that multilayer PPy nanosheets with spontaneously formed surface structures such as wrinkles and ridges via sequential polymerization on paper substrates can dramatically enhance broadband and wide-angle light absorption across the full solar spectrum, leading to an impressive solar-thermal conversion efficiency of 95.33%. The intriguing solar-thermal properties and structural features of multilayer PPy nanosheets can be used for solar heating and photoactuators. Meanwhile, when used for solar steam generation, the measured efficiency could achieve ≈92% under one sun irradiation. The hierarchically multilayer structure is mechanically flexible and robust, holding great potential for practical solar energy utilization. This study provides a simple and straightforward approach toward engineering light-weight and thermally insulating polymers into efficient solar-thermal materials for emerging solar energy-related applications.

Fabrication of organic light-emitting devices comprising stacked light-emitting units by solution-based processes

Multi-organic light-emitting devices comprising two light-emitting units stacked in series through a charge-generation layer are fabricated by solution processes. A zinc oxide nanoparticles/polyethylene-imine bilayer is used as the electron-injection layer and phosphomolybdic acid is used as the charge-generation layer. Appropriate choice of solvents during spin-coating of each layer ensures the nine-layered structure fabricated by solution processes.

Instant low-temperature cross-linking of poly(N-vinylcarbazole) for solution-processed multilayer blue phosphorescent organic light-emitting devices

Poly(N-vinylcarbazole) undergoes cross-linking to highly solvent-resistant films through an oxidative coupling reaction, for which an annealing process takes only 3 min at 110 °C. This reaction allows the construction of a solution-processed multilayer OLED without a time-consuming annealing process. The maximum external quantum efficiency reaches 18%, and remains at 17%, even at a high brightness of 10 000 cd m(-2) for all-solution-processed blue OLEDs.