Construction of the single-diamond-structured titania scaffold-Recreation of the holy grail photonic structure

As one of the most stunning biological nanostructures, the single-diamond (SD) surface discovered in beetles and weevils exoskeletons possesses the widest complete photonic bandgap known to date and is renowned as the "holy grail" of photonic materials. However, the synthesis of SD is difficult due to its thermodynamical instability compared to the energetically favoured bicontinuous double diamond and other easily formed lattices; thus, the artificial fabrication of SD has long been a formidable challenge. Herein, we report a bottom-up approach to fabricate SD titania networks via a one-pot cooperative assembly scenario employing the diblock copolymer poly(ethylene oxide)-block-polystyrene as a soft template and titanium diisopropoxide bis(acetylacetonate) as an inorganic precursor in a mixed solvent, in which the SD scaffold was obtained by kinetically controlled nucleation and growth in the skeletal channels of the diamond minimal surface formed by the polymer matrix. Electron crystallography investigations revealed the formation of tetrahedrally connected SD frameworks with the space group Fd [Formula: see text] m in a polycrystalline anatase form. A photonic bandgap calculation showed that the resulting SD structure has a wide and complete bandgap. This work solves the complex synthetic enigmas and offers a frontier in hyperbolic surfaces, biorelevant materials, next-generation optical devices, etc.

Ultrafast Dynamics, Optical Nonlinearities, and Chemical Sensing Application of Free-Standing Porous Silicon-Based Optical Microcavities

The present work demonstrates the ultrafast carrier dynamics and third-order nonlinear optical properties of electrochemically fabricated free-standing porous silicon (FS-PSi)-based optical microcavities via femtosecond transient absorption spectroscopy (TAS) and single-beam Z-scan techniques, respectively. The TAS (pump: 400 nm, probe: 430-780 nm, ∼70 fs, 1 kHz) decay dynamics are dominated by the photoinduced absorption (PIA, lifetime range: 4.7-156 ps) as well as photoinduced bleaching (PIB, 4.3-324 ps) for the cavity mode (λc) and the band edges. A fascinating switching behavior from the PIB (-ve) to the PIA (+ve) has been observed in the cavity mode, which shows the potential in ultrafast switching applications. The third-order optical nonlinearities revealed an enhanced two-photon absorption coefficient (β) in the order of 10-10 mW-1 along with the nonlinear refractive index (n2) in the range of 10-17 m2 W-1. Furthermore, a real-time sensing application of such FS-PSi microcavities has been demonstrated for detecting organic solvents by simultaneously monitoring the kinetics in reflection and transmission mode.

Photonic Interpenetrating Polymer Network Fibers Comprising Intertwined Solid-State Cholesteric Liquid Crystal and Polyelectrolyte Networks for Sensor Applications

Uniform-sized photonic interpenetrating polymer network (IPN) fibers comprising intertwined solid-state cholesteric liquid crystal (CLCsolid) and anionic poly(acrylic acid) (PAA) or cationic poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) networks (photonic IPNPAA or IPNPDMAEMA fibers) were developed for sensor applications. IPNPAA or IPNPDMAEMA fibers with a perfect photonic structure were fabricated inside Teflon tube templates without any treatments for realizing a planar orientation in those fibers. The dominant wavelength of the photonic color from a photograph taken with a cellular phone was used to measure the photonic color change. Photonic IPNPAA fibers treated with KOH (IPNKOH fibers) were used for sensing humidity and divalent metal ions. The linear ranges for relative humidity and Ca2+ detection were 21-92% and 0.5-3.5 mM, and their limits of detection (LODs) were 7.86% and 0.07 mM, respectively. The photonic IPNPAA (or IPNPDMAEMA) fiber immobilized with urease (IPNPAA-urease) (or glucose oxidase (IPNPDMAEMA-GOx)) was used for urea (or glucose) biosensor application. The photonic IPNPAA-urease (or IPNPDMAEMA-GOx) fiber was red-shifted in response to urea (or glucose) in the linear range of 10-60 mM (or 2-16 mM) with an LOD of 2.54 mM (or 0.76 mM). These photonic IPN fibers are promising because of their easy fabrication and miniaturization, battery-free device, cost-effectiveness, and visual detection without using sophisticated analytical instruments. The developed photonic IPN fibers provide new possibilities for the widespread use of photonic sensors in cutting-edge wearable technology and beyond.

Thermal Management by Engineering the Alignment of Nanocellulose

One of the grand current research challenges is to improve the energy efficiency of residential and commercial buildings, which cumulatively consume more than 40% of the energy generated globally. In addition to improving the comfort of the inhabitants and mitigating the growing energy consumption problem, new building materials and technologies could provide a safe strategy for geoengineering to mitigate global climate change. Herein, recent progress in developing such advanced materials from nanocellulose, which is often derived from wood or even dirty feedstocks like waste, is reviewed. By using chemical and bacteria-enabled processing, nanocellulose can be used to fabricate broadband photonic reflectors, thermally super-insulating aerogels, solar gain regulators, and low-emissivity coatings, with potential applications in windows, roofs, walls, and other components of buildings envelopes. These material developments draw inspiration from advanced energy management found in nature, such as the nanoporous photonic structures that evolved in cuticles of beetles. Fabrication of such materials takes advantage of mesoscale liquid crystalline self-assembly, which allows for pre-designed control of cellulose nanoparticle orientations at the mesoscale. With the potential fully realized, such materials could one day transform the current energy-lossy buildings into energy plants on Earth and possibly even enable extraterrestrial habitats.

InP-Substrate-Based Quantum Dashes on a DBR as Single-Photon Emitters at the Third Telecommunication Window

We investigated emission properties of photonic structures with InAs/InGaAlAs/InP quantum dashes grown by molecular beam epitaxy on a distributed Bragg reflector. In high-spatial-resolution photoluminescence experiment, well-resolved sharp spectral lines are observed and single-photon emission is detected in the third telecommunication window characterized by very low multiphoton events probabilities. The photoluminescence spectra measured on simple photonic structures in the form of cylindrical mesas reveal significant intensity enhancement by a factor of 4 when compared to a planar sample. These results are supported by simulations of the electromagnetic field distribution, which show emission extraction efficiencies even above 18% for optimized designs. When combined with relatively simple and undemanding fabrication approach, it makes this kind of structures competitive with the existing solutions in that spectral range and prospective in the context of efficient and practical single-photon sources for fiber-based quantum networks applications.

Microcavity-Free Broadband Light Outcoupling Enhancement in Flexible Organic Light-Emitting Diodes with Nanostructured Transparent Metal-Dielectric Composite Electrodes

Flexible organic light-emitting diodes (OLEDs) hold great promise for future bendable display and curved lighting applications. One key challenge of high-performance flexible OLEDs is to develop new flexible transparent conductive electrodes with superior mechanical, electrical, and optical properties. Herein, an effective nanostructured metal/dielectric composite electrode on a plastic substrate is reported by combining a quasi-random outcoupling structure for broadband and angle-independent light outcoupling of white emission with an ultrathin metal alloy film for optimum optical transparency, electrical conduction, and mechanical flexibility. The microcavity effect and surface plasmonic loss can be remarkably reduced in white flexible OLEDs, resulting in a substantial increase in the external quantum efficiency and power efficiency to 47.2% and 112.4 lm W(-1).