Competing Mechanisms in Palladium-Catalyzed Alkoxycarbonylation of Styrene

Palladium-catalyzed carbonylation is a versatile method for the synthesis of various aldehydes, esters, lactones, or lactams. Alkoxycarbonylation of alkenes with carbon monoxide and alcohol produces either saturated or unsaturated esters as a result of two distinct catalytic cycles. The existing literature presents an inconsistent account of the procedures favoring oxidative carbonylation products. In this study, we have monitored the intermediates featured in both catalytic cycles of the methoxycarbonylation of styrene PhCH=CH2 as a model substrate, including all short-lived intermediates, using mass spectrometry. Comparing the reaction kinetics of the intermediates in both cycles in the same reaction mixture shows that the reaction proceeding via alkoxy intermediate [PdII]-OR, which gives rise to the unsaturated product PhCH=CHCO2Me, is faster. However, with an advancing reaction time, the gradually changing reaction conditions begin to favor the catalytic cycle dominated by palladium hydride [PdII]-H and alkyl intermediates, affording the saturated products PhCH2CH2CO2Me and PhCH(CO2Me)CH3 preferentially. The role of the oxidant proved to be crucial: using p-benzoquinone results in a gradual decrease of the pH during the reaction, swaying the system from oxidative conditions toward the palladium hydride cycle. By contrast, copper(II) acetate as an oxidant guards the pH within the 5-7 range and facilitates the formation of the alkoxy palladium complex [PdII]-OR, which favors the oxidative reaction producing PhCH=CHCO2Me with high selectivity. Hence, it is the oxidant, rather than the catalyst, that controls the reaction outcome by a mechanistic switch. Unraveling these principles broadens the scope for developing alkoxycarbonylation reactions and their application in organic synthesis.

Reaction monitoring via benchtop nuclear magnetic resonance spectroscopy: A practical comparison of on-line stopped-flow and continuous-flow sampling methods

The ability for nuclear magnetic resonance (NMR) spectroscopy to provide quantitative, structurally rich information makes this spectroscopic technique an attractive reaction monitoring tool. The practicality of NMR for this type of analysis has only increased in the recent years with the influx of commercially available benchtop NMR instruments and compatible flow systems. In this study, we aim to compare 19F NMR reaction profiles acquired under both on-line continuous-flow and stopped-flow sampling methods, with modern benchtop NMR instrumentation, and two reaction systems: a homogeneous imination reaction and a biphasic activation of a carboxylic acid to acyl fluoride. Reaction trends with higher data density can be acquired with on-line continuous-flow analyses, and this work highlights that representative reaction trends can be acquired without any correction when monitoring resonances with a shorter spin-lattice relaxation time (T1), and with the used flow conditions. On-line stopped-flow analyses resulted in representative reaction trends in all cases, including the monitoring of resonances with a long T1, without the need of any correction factors. The benefit of easier data analysis, however, comes with the cost of time, as the fresh reaction solution must be flowed into the NMR system, halted, and time must be provided for spins to become polarized in the instrument's external magnetic field prior to spectral measurement. Results for one of the reactions were additionally compared with the use of a high-field NMR.

A reliable external calibration method for reaction monitoring with benchtop NMR

Nuclear magnetic resonance (NMR) spectroscopy is a powerful analytical technique with the ability to acquire both quantitative and structurally insightful data for multiple components in a test sample. This makes NMR spectroscopy a desirable tool to understand, monitor, and optimize chemical transformations. While quantitative NMR (qNMR) approaches relying on internal standards are well-established, using an absolute external calibration scheme is beneficial for reaction monitoring as resonance overlap complications from an added reference material to the sample can be avoided. Particularly, this type of qNMR technique is of interest with benchtop NMR spectrometers as the likelihood of resonance overlap is only enhanced with the lower magnetic field strengths of the used permanent magnets. The included study describes a simple yet robust methodology to determine concentration conversion factors for NMR systems using single- and multi-analyte linear regression models. This approach is leveraged to investigate a pharmaceutically relevant amide coupling batch reaction. An on-line stopped-flow (i.e., interrupted-flow or paused-flow) benchtop NMR system was used to monitor both the 1,1'-carbonyldiimidazole (CDI) promoted acid activation and the amide coupling. The results highlight how quantitative measurements in benchtop NMR systems can provide valuable information and enable analysts to make decisions in real time.

Cryogen-free 400-MHz nuclear magnetic resonance spectrometer as a versatile tool for pharmaceutical process analytical technology

The discovery of new ceramic materials containing Ba-La-Cu oxides in 1986 that exhibited superconducting properties at high temperatures in the range of 35 K or higher, recognized with the Nobel Prize in Physics in 1987, opened a new world of opportunities for nuclear magnetic resonance (NMRs) and magnetic resonance imaging (MRIs) to move away from liquid cryogens. This discovery expands the application of high temperature superconducting (HTS) materials to fields beyond the chemical and medical industries, including electrical power grids, energy, and aerospace. The prototype 400-MHz cryofree HTS NMR spectrometer installed at Amgen's chemistry laboratory has been vital for a variety of applications such as structure analysis, reaction monitoring, and CASE-3D studies with RDCs. The spectrometer has been integrated with Amgen's chemistry and analytical workflows, providing pipeline project support in tandem with other Kinetic Analysis Platform technologies. The 400-MHz cryofree HTS NMR spectrometer, as the name implies, does not require liquid cryogens refills and has smaller footprint that facilitates installation into a chemistry laboratory fume hood, sharing the hood with a process chemistry reactor. Our evaluation of its performance for structural analysis with CASE-3D protocol and for reaction monitoring of Amgen's pipeline chemistry was successful. We envision that the HTS magnets would become part of the standard NMR and MRI spectrometers in the future. We believe that while the technology is being developed, there is room for all magnet options, including HTS, low temperature superconducting (LTS) magnets, and low field benchtop NMRs with permanent magnets, where utilization will be dependent on application type and costs.

Coaxial Dielectric Spectroscopy as an In-Line Process Analytical Technique for Reaction Monitoring

The suitability of broadband dielectric spectroscopy (DS) as a tool for in-line (in situ) reaction monitoring is demonstrated. Using the esterification of 4-nitrophenol as a test-case, we show that multivariate analysis of time-resolved DS data-collected across a wide frequency range with a coaxial dip-probe-allows reaction progress to be measured with both high precision and high accuracy. In addition to the workflows for data collection and analysis, we also establish a convenient method for rapidly assessing the applicability of DS to previously untested reactions or processes. We envisage that, given its orthogonality to other spectroscopic methods, its low cost, and its ease of implementation, DS will be a valuable addition to the process chemist's analytical toolbox.

An adaptive soft-sensor for advanced real-time monitoring of an antibody-drug conjugation reaction

In the production of antibody-drug conjugates (ADCs), the conjugation reaction is a central step defining the final product composition and, hence, directly affecting product safety and efficacy. To enable real-time monitoring, spectroscopic sensors in combination with multivariate regression models have gained popularity in recent years. The extended Kalman filter (EKF) can be used as so-called soft-sensor to fuse sensor predictions with long-horizon forecasts by process models. This enables the dynamic update of the current state and provides increased robustness against experimental noise or model errors. Due to the uncertainty associated with sensor and process models in biopharmaceutical applications, the deployment of such soft-sensors is challenging. In this study, we demonstrate the combination of an uncertainty-aware sensor model with a kinetic reaction model using an EKF to monitor a site-directed ADC conjugation reaction. As the sensor model, a Gaussian process regression model is presented to realize a time-variant determination of the sensor uncertainty. The EKF fuses the time-discrete predictions of the amount of conjugated drug from the sensor model with the time-continuous predictions from the kinetic model. While the ADC species are not distinguishable by on-line recorded UV/Vis spectra, the developed soft-sensor is able to dynamically update all relevant reaction species. It could be shown that the use of time-variant process and sensor noise computation approaches improved the performance of the EKF and achieved a reduction of the prediction error of up to 23% compared with the kinetic model. The developed framework proved to enhance robustness against noisy sensor measurements or wrong model initialization and was successfully transferred from batch to fed-batch mode. In future, this framework could be implemented for model-based process control and be adopted for other ADC conjugation reaction types.

Real-Time Reaction Monitoring of Azide-Alkyne Cycloadditions Using Benchtop NMR-Based Signal Amplification by Reversible Exchange (SABRE)

Rufinamide, possessing a triazole ring, is a new antiepileptic drug (AED) relatively well-absorbed in the lower dose range (10 mg/kg per day) and is currently being used in antiepileptic medications. Triazole derivatives can interact with various enzymes and receptors in biological systems via diverse non-covalent interactions, thus inducing versatile biological effects. Strain-promoted azide-alkyne cycloaddition (SPAAC) is a significant method for obtaining triazoles, even under physiological conditions, in the absence of a copper catalyst. To confirm the progress of chemical reactions under biological conditions, research on reaction monitoring at low concentrations is essential. This promising strategy is gaining acceptance for applications in fields such as drug development and nanoscience. We investigated the optimum Ir catalyst and magnetic field for achieving maximum proton hyperpolarization transfer in triazole derivatives. These reactions were analyzed using signal amplification by reversible exchange (SABRE) to overcome the limitations of low sensitivity in nuclear magnetic resonance spectroscopy, when monitoring copper-free click reactions in real time. Finally, a more versatile copper-catalyzed click reaction was monitored in real time, using a 60 MHz benchtop NMR system, in order to analyze the reaction mechanism.

Pd Reaction Intermediates in Suzuki-Miyaura Cross-Coupling Characterized by Mass Spectrometry

Palladium-catalyzed Suzuki-Miyaura (SM) coupling is widely utilized in the construction of carbon-carbon bonds. In this study, nanoelectrospray ionization mass spectrometry (nanoESI-MS) is applied to simultaneously monitor precatalysts, catalytic intermediates, reagents, and products of the SM cross-coupling reaction of 3-Br-5-Ph-pyridine and phenylboronic acid. A set of Pd cluster ions related to the monoligated Pd (0) active catalyst is detected, and its deconvoluted isotopic distribution reveals contributions from two neutral molecules. One is assigned to the generally accepted Pd(0) active catalyst, seen in MS as the protonated molecule, while the other is tentatively assigned to an oxidized catalyst which was found to increase as the reaction proceeds. Oxidative stress testing of a synthetic model catalyst 1,5-cyclooctadiene Pd XPhos (COD-Pd-XPhos) performed using FeCl3 supported this assignment. The formation and conversion of the oxidative addition intermediate during the catalytic cycle was monitored to provide information on the progress of the transmetalation step.

Improvement of High-Throughput Experimentation Using Synthesis Robots by the Implementation of Tailor-Made Sensors

A small, low-cost, self-produced photometer is implemented into a synthesis robot and combined with a modified UV chamber to enable automated sampling and online characterization. In order to show the usability of the new approach, two different reversible addition–fragmentation chain transfer (RAFT) polymers were irradiated with UV light. Automated sampling and subsequent characterization revealed different reaction kinetics depending on polymer type. Thus, a long initiation time (20 min) is required for the end-group degradation of poly(ethylene glycol) ether methyl methacrylate (poly(PEGMEMA)), whereas poly(methyl methacrylate) (PMMA) is immediately converted. Lastly, all photometric samples are characterized via size-exclusion chromatography using UV and RI detectors to prove the results of the self-produced sensor and to investigate the molar mass shift during the reaction.

Enabling Technology for Supramolecular Chemistry

Supramolecular materials-materials that exploit non-covalent interactions-are increasing in structural complexity, selectivity, function, stability, and scalability, but their use in applications has been comparatively limited. In this Minireview, we summarize the opportunities presented by enabling technology-flow chemistry, high-throughput screening, and automation-to wield greater control over the processes in supramolecular chemistry and accelerate the discovery and use of self-assembled systems. Finally, we give an outlook for how these tools could transform the future of the field.

Nuclear Magnetic Resonance Spectroscopy for Quantitative Analysis: A Review for Its Application in the Chemical, Pharmaceutical and Medicinal Domains

Nuclear magnetic resonance (NMR) is a rapid and accurate analytical tool for qualification and quantification. The capacity of NMR of being quantitative can also justify the calibration of other analytical methods. In pharmaceutical domain, quantitative NMR (qNMR) can be applied in the identification and quantification of drug simultaneously. The early drug development stage requires a minimum sample for analysis. Thus, priority should be given to utilize this technique to attain results with least investment, rapid analysis time and minimum sample consumption. This technique is a significant phenomenon to identify impurities, drug substance, residual solvents of in-process control (IPC) samples and characterizing the formulations. From an analyst's perspective, qNMR proved to be a routine practice in pharmaceutical industry to qualify any drug product. The absolute and relative methods offer great help in quantifying the component of interest in the process control samples and finished products. This review highlights the evolution of NMR application in the pharmaceutical industry, where determining the purity of drug substance, drug product and establishing the identity of impurities and its level are the challenging aspects. NMR in medicinal field emerging as a numero uno for Covid-19 severity detection and its dire consequences, accelerated vaccine development and the mapping of SAR-COV-2 RNA and proteins via chemical shift assignments.

A comparison of non-uniform sampling and model-based analysis of NMR spectra for reaction monitoring

Nuclear magnetic resonance (NMR) spectroscopy is widely used for applications in the field of reaction and process monitoring. When complex reaction mixtures are studied, NMR spectra often suffer from low resolution and overlapping peaks, which places high demands on the method used to acquire or to analyse the NMR spectra. This work presents two NMR methods that help overcome these challenges: 2D non-uniform sampling (NUS) and a recently proposed model-based fitting approach for the analysis of 1D NMR spectra. We use the reaction of glycerol with acetic acid as it produces five reaction products that are all chemically similar and, hence, challenging to distinguish. The reaction was measured on a high-field 400 MHz NMR spectrometer with a 2D NUS-heteronuclear single quantum coherence (HSQC) and a conventional 1D ¹ H NMR sequence. We show that comparable results can be obtained using both 2D and 1D methods, if the 2D volume integrals of the 2D NUS-HSQC NMR spectra are calibrated. Further, we monitor the same reaction on a low-field 43 MHz benchtop NMR spectrometer and analyse the acquired 1D ¹ H NMR spectra with the model-based approach and with partial least-squares regression (PLS-R), both trained using a single, calibrated data set. Both methods achieve results that are in good quantitative agreement with the high-field data. However, the model-based method was found to be less sensitive to the training data set used than PLS-R and, hence, was more robust when the reaction conditions differed from that of the training data.

Benefits of time-resolved nonuniform sampling in reaction monitoring: The case of aza-Michael addition of benzylamine and acrylamide

Monitoring of chemical reactions is best carried out using methods that sample the test object at a rate greater than the time scale of the processes taking place. The recently proposed time-resolved nonuniform sampling (TR-NUS) method allows the use of two-dimensional (2D) nuclear magnetic resonance (NMR) spectra for this purpose and provides a time resolution equivalent to that achievable using one-dimensional spectra. Herein, we show that TR-NUS acquired data eliminates 2D spectral line disturbances and enables more accurate signal integration and kinetics conclusions. The considerations are exemplified with a seemingly simple aza-Michael reaction of benzylamine and acrylamide. Surprisingly, the product identification is possible only using 2D spectra, although credible monitoring requires TR-NUS.

Exploration of continuous-flow benchtop NMR acquisition parameters and considerations for reaction monitoring

This study focused on fundamental data acquisition parameter selection for a benchtop nuclear magnetic resonance (NMR) system with continuous flow, applicable for reaction monitoring. The effect of flow rate on the mixing behaviors within a flow cell was observed, along with an exponential decay relationship between flow rate and the apparent spin-lattice relaxation time (T1*) of benzaldehyde. We also monitored sensitivity (as determined by signal-to-noise ratios; SNRs) under various flow rates, analyte concentrations, and temperatures of the analyte flask. Results suggest that a maximum SNR can be achieved with low to medium flow rates and higher analyte concentrations. This was consistent with data collected with parameters that promote either slow or fast data acquisition. We further consider the effect of these conditions on the analyte's residence time, T1*, and magnetic field inhomogeneity that is a product of continuous flow. Altogether, our results demonstrate how fundamental acquisition parameters can be manipulated to achieve optimal data acquisition in continuous-flow NMR systems.

NMR spectroscopy goes mobile: Using NMR as process analytical technology at the fume hood

Nuclear magnetic resonance (NMR) is potentially a very powerful process analytical technology (PAT) tool as it gives an atomic resolution picture of the reaction mixture without the need for chromatography. NMR is well suited for interrogating transient intermediates, providing kinetic information via NMR active nuclei, and most importantly provides universally quantitative information for all species in solution. This contrasts with commonly used PAT instruments, such as Raman or Flow-infrared (IR), which requires a separate calibration curve for every component of the reaction mixture. To date, the large footprint of high-field (≥400 MHz) NMR spectrometers and the immobility of superconducting magnets, coupled with strict requirements for the architecture for the room it is to be installed, have been a major obstacle to using this technology right next to fume hoods where chemists perform synthetic work. Here, we describe the use of a small, lightweight 60 MHz Benchtop NMR system (Nanalysis Pro-60) located on a mobile platform, that was used to monitor both small and intermediate scale Grignard formation and coupling reactions. We also show how low field NMR can provide a deceptively simple yes/no answer (for a system that would otherwise require laborious off-line testing) in the enrichment of one component versus another in a kilogram scale distillation. Benchtop NMR was also used to derive molecule specific information from Flow-IR, a technology found in most manufacturing sites, and compare the ease at which the concentrations of the reaction mixtures can be derived by NMR versus IR.

Chemical Reaction Monitoring using Zero-Field Nuclear Magnetic Resonance Enables Study of Heterogeneous Samples in Metal Containers

We demonstrate that heterogeneous/biphasic chemical reactions can be monitored with high spectroscopic resolution using zero-field nuclear magnetic resonance spectroscopy. This is possible because magnetic susceptibility broadening is negligible at ultralow magnetic fields. We show the two-step hydrogenation of dimethyl acetylenedicarboxylate with para-enriched hydrogen gas in conventional glass NMR tubes, as well as in a titanium tube. The low frequency zero-field NMR signals ensure that there is no significant signal attenuation arising from shielding by the electrically conductive sample container. This method paves the way for in situ monitoring of reactions in complex heterogeneous multiphase systems and in reactors made of conductive materials while maintaining resolution and chemical specificity.

Live Monitoring of Strain-Promoted Azide Alkyne Cycloadditions in Complex Reaction Environments by Inline ATR-IR Spectroscopy

The strain-promoted azide alkyne cycloaddition (SPAAC) is a powerful tool for forming covalent bonds between molecules even under physiological conditions, and therefore found broad application in fields ranging from biological chemistry and biomedical research to materials sciences. For many applications, knowledge about reaction kinetics of these ligations is of utmost importance. Kinetics are commonly assessed and studied by NMR measurements. However, these experiments are limited in terms of temperature and restricted to deuterated solvents. By using an inline ATR-IR probe we show that the cycloaddition of azides and alkynes can be monitored in aqueous and even complex biological fluids enabling the investigation of reaction kinetics in various solvents and even human blood plasma under controlled conditions in low reaction volumes.

Extending Surface-Enhanced Raman Spectroscopy to Liquids Using Shell-Isolated Plasmonic Superstructures

Plasmonic superstructures (PS) based on Au/SiO₂ were prepared for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) in liquid phase applications. These superstructures are composed of functionalized SiO₂ spheres with plasmonic Au nanoparticles (NPs) on their surface. Functionalization was performed with (3-aminopropyl)trimethoxysilane, (3-mercaptopropyl)trimethoxysilane and poly(ethylene-imine) (PEI). Of these three, PEI-functionalized spheres showed the highest adsorption density of Au NPs in TEM, UV/Vis and dynamic light scattering (DLS) experiments. Upon decreasing the Au NP/SiO₂ sphere size ratio, an increase in adsorption density was also observed. To optimize plasmonic activity, 61 nm Au NPs were adsorbed onto 900 nm SiO₂ -PEI spheres and these PS were coated with an ultrathin layer (1-2 nm) of SiO₂ to obtain Shell-Isolated Plasmonic Superstructures (SHIPS), preventing direct contact between Au NPs and the liquid medium. Zeta potential measurements, TEM and SHINERS showed that SiO₂ coating was successful. The detection limit for SHINERS using SHIPS and a 638 nm laser was around 10^-12  m of Rhodamine (10^-15  m for uncoated PS), all with acquisition settings suitable for catalysis applications.

Synthesis of α-fluoro-α,β-unsaturated esters monitored by 1D and 2D benchtop NMR spectroscopy

For optimization and control of pharmaceutically and industrially important reactions, chemical information is required in real time. Instrument size, handling, and operation costs are important criteria to be considered when choosing a suitable analytical method apart from sensitivity and resolution. This present study explores the use of a robust and compact nuclear magnetic resonance (NMR) spectrometer to monitor the stereo-selective formation of α-fluoro-α,β-unsaturated esters from α-fluoro-β-keto esters via deprotonation and deacylation in real time. These compounds are precursors of various pharmaceutically active substances. The real-time study revealed the deprotonation and deacylation steps of the reaction. The reaction was studied at temperatures ranging from 293 to 333 K by interleaved one-dimensional ¹ H and ¹⁹ F and two-dimensional ¹ H-¹ H COSY experiments. The kinetic rate constants were evaluated using a pseudo first-order kinetic model. The activation energies for the deprotonation and deacylation steps were determined to 28 ± 2 and 63.5 ± 8 kJ/mol, respectively. This showed that the deprotonation step is fast compared with the deacylation step and that the deacylation step determines the rate of the overall reaction. The reaction was repeated three times at 293 K to monitor the repeatability and stability of the system. The compact NMR spectrometer provided detailed information on the mechanism and kinetics of the reaction, which is essential for optimizing the synthetic routes for stepwise syntheses of pharmaceutically active substances.

Assigning the ESI mass spectra of organometallic and coordination compounds

Electrospray ionization mass spectrometry (ESI-MS) is a useful technique for solving organometallic and coordination chemistry characterization problems that are difficult to address using traditional methods. However, assigning the ESI mass spectra of such compounds can be challenging, and the considerations involved in doing so are quite different from assigning the mass spectra of purely organic samples. This is a tutorial article for organometallic/coordination chemists using ESI-MS to analyze pure compounds or reaction mixtures. The fundamentals of assigning ESI mass spectra are discussed within the context of organometallic and coordination systems. The types of ions commonly observed by ESI-MS are categorized and described. Finally, a step-by-step guide for the assignment of organometallic and coordination chemistry ESI mass spectra is provided along with two case studies.

Monitoring Hydrogenation Reactions using Benchtop 2D NMR with Extraordinary Sensitivity and Spectral Resolution

Low-field benchtop nuclear magnetic resonance (BT-NMR) spectrometers with Halbach magnets are being increasingly used in science and industry as cost-efficient tools for the monitoring of chemical reactions, including hydrogenation. However, their use of low-field magnets limits both resolution and sensitivity. In this paper, we show that it is possible to alleviate these two problems through the combination of parahydrogen-induced polarization (PHIP) and fast correlation spectroscopy with time-resolved non-uniform sampling (TR-NUS). PHIP can enhance NMR signals so that substrates are easily detectable on BT-NMR spectrometers. The interleaved acquisition of one- and two-dimensional spectra with TR-NUS provides unique insight into the consecutive moments of hydrogenation reactions, with a spectral resolution unachievable in a standard approach. We illustrate the potential of the technique with two examples: the hydrogenation of ethylphenyl propiolate and the hydrogenation of a mixture of two substrates - ethylphenyl propiolate and ethyl 2-butynoate.

TReNDS-Software for reaction monitoring with time-resolved non-uniform sampling

NMR spectroscopy, used routinely for structure elucidation, has also become a widely applied tool for process and reaction monitoring. However, the most informative of NMR methods-correlation experiments-are often useless in this kind of applications. The traditional sampling of a multidimensional FID is usually time-consuming, and thus, the reaction-monitoring toolbox was practically limited to 1D experiments (with rare exceptions, e.g., single-scan or fast-sampling experiments). Recently, the technique of time-resolved non-uniform sampling (TR-NUS) has been proposed, which allows to use standard multidimensional pulse sequences preserving the temporal resolution close to that achievable in 1D experiments. However, the method existed only as a prototype and did not allow on-the-fly processing during the reaction. In this paper, we introduce TReNDS: free, user-friendly software kit for acquisition and processing of TR-NUS data. The program works on Bruker, Agilent, and Magritek spectrometers, allowing to carry out up to four experiments with interleaved TR-NUS. The performance of the program is demonstrated on the example of enzymatic hydrolysis of sucrose.

Concentrating Immiscible Molecules at Solid@MOF Interfacial Nanocavities to Drive an Inert Gas-Liquid Reaction at Ambient Conditions

Gas-liquid reactions form the basis of our everyday lives, yet they still suffer poor reaction efficiency and are difficult to monitor in situ, especially at ambient conditions. Now, an inert gas-liquid reaction between aniline and CO₂ is driven at 1 atm and 298 K by selectively concentrating these immiscible reactants at the interface between metal-organic framework and solid nanoparticles (solid@MOF). Real-time reaction SERS monitoring and simulations affirm the formation of phenylcarbamic acid, which was previously undetectable because they are unstable for post-reaction treatments. The solid@MOF ensemble gives rise to a more than 28-fold improvement to reaction efficiency as compared to ZIF-only and solid-only platforms, emphasizing that the interfacial nanocavities in solid@MOF are the key to enhance the gas-liquid reaction. Our strategy can be integrated with other functional materials, thus opening up new opportunities for ambient-operated gas-liquid applications.

Mass Spectrometry for Synthesis and Analysis

Mass spectrometry is the science and technology of ions. As such, it is concerned with generating ions, measuring their properties, following their reactions, isolating them, and using them to build and transform materials. Instrumentation is an essential element of these activities, and analytical applications are one driving force. Work from the Aston Laboratories at Purdue University's Department of Chemistry is described here, with an emphasis on accelerated reactions of ions in solution and small-scale synthesis; ion/surface collision processes, including surface-induced dissociation (SID) and ion soft landing; and applications to tissue imaging. Our special interest in chirality and the chemistry behind the origins of life is also featured together with the exciting area of tissue diagnostics.

Desktop NMR and Its Applications From Materials Science To Organic Chemistry

NMR spectroscopy is an indispensable method of analysis in chemistry, which until recently suffered from high demands for space, high costs for acquisition and maintenance, and operational complexity. This has changed with the introduction of compact NMR spectrometers suitable for small-molecule analysis on the chemical workbench. These spectrometers contain permanent magnets giving rise to proton NMR frequencies between 40 and 80 MHz. The enabling technology is to make small permanent magnets with homogeneous fields. Tabletop instruments with inhomogeneous fields have been in use for over 40 years for characterizing food and hydrogen-containing materials by relaxation and diffusion measurements. Related NMR instruments measure these parameters in the stray field outside the magnet. They are used to inspect the borehole walls of oil wells and to test objects nondestructively. The state-of-the-art of NMR spectroscopy, imaging and relaxometry with compact instruments is reviewed.

Real-Time Monitoring of Enzyme-Catalysed Reactions using Deep UV Resonance Raman Spectroscopy

For enzyme-catalysed biotransformations, continuous in situ detection methods minimise the need for sample manipulation, ultimately leading to more accurate real-time kinetic determinations of substrate(s) and product(s). We have established for the first time an on-line, real-time quantitative approach to monitor simultaneously multiple biotransformations based on UV resonance Raman (UVRR) spectroscopy. To exemplify the generality and versatility of this approach, multiple substrates and enzyme systems were used involving nitrile hydratase (NHase) and xanthine oxidase (XO), both of which are of industrial and biological significance, and incorporate multistep enzymatic conversions. Multivariate data analysis of the UVRR spectra, involving multivariate curve resolution-alternating least squares (MCR-ALS), was employed to effect absolute quantification of substrate(s) and product(s); repeated benchmarking of UVRR combined with MCR-ALS by HPLC confirmed excellent reproducibility.

Progress toward reaction monitoring at variable temperatures: a new stopped-flow NMR probe design

A stopped-flow NMR probe is described that enables fast flow rates, short transfer times, and equilibration of the reactant magnetization and temperature prior to reaction. The capabilities of the probe are demonstrated by monitoring the polymerization of lactide as catalyzed by the air-sensitive catalyst 1,3-dimesitylimidazol-2-ylidene (IMes) over the temperature range of -30 to 40 °C. The incorporation of stopped-flow capabilities into an NMR probe permits the rich information content of NMR to be accessed during the first few seconds of a fast reaction. Copyright © 2016 John Wiley & Sons, Ltd.

Utilizing on- and off-line monitoring tools to follow a kinetic resolution step during flow synthesis

In situ reaction monitoring tools offer the ability to track the progress of a synthetic reaction in real time to facilitate reaction optimization and provide kinetic/mechanistic insight. Herein, we report the utilization of flow NMR, flow IR, and other off-line spectroscopy tools to monitor the progress of a flow chemistry reaction. The on-line and off-line tools were selected to facilitate the stereoselective kinetic resolution of a key racemic monomer, which lacked a chromophore, making conventional reaction monitoring difficult. Copyright © 2016 John Wiley & Sons, Ltd.

In Situ Solid-State Reactions Monitored by X-ray Absorption Spectroscopy: Temperature-Induced Proton Transfer Leads to Chemical Shifts

The dramatic colour and phase alteration with the solid-state, temperature-dependent reaction between squaric acid and 4,4'-bipyridine has been probed in situ with X-ray absorption spectroscopy. The electronic and chemical sensitivity to the local atomic environment through chemical shifts in the near-edge X-ray absorption fine structure (NEXAFS) revealed proton transfer from the acid to the bipyridine base through the change in nitrogen protonation state in the high-temperature form. Direct detection of proton transfer coupled with structural analysis elucidates the nature of the solid-state process, with intermolecular proton transfer occurring along an acid-base chain followed by a domino effect to the subsequent acid-base chains, leading to the rapid migration along the length of the crystal. NEXAFS thereby conveys the ability to monitor the nature of solid-state chemical reactions in situ, without the need for a priori information or long-range order.

NMR spectroscopy to follow reaction progress in ionic liquids

In order to understand reaction outcomes in ionic liquids, it is crucial to be able to follow the progress of these reactions. This review highlights the advantages of NMR spectroscopy over other analytical techniques in following reaction progress in ionic liquids, particularly addressing the practical aspects of the methodology and highlighting the range of processes that can be readily followed. Copyright © 2014 John Wiley & Sons, Ltd.

Automated data evaluation and modelling of simultaneous (19) F-(1) H medium-resolution NMR spectra for online reaction monitoring

Medium-resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and process monitoring. In contrast to high-resolution online NMR (HR-NMR), MR-NMR can be operated under rough environmental conditions. A continuous re-circulating stream of reaction mixture from the reaction vessel to the NMR spectrometer enables a non-invasive, volume integrating online analysis of reactants and products. Here, we investigate the esterification of 2,2,2-trifluoroethanol with acetic acid to 2,2,2-trifluoroethyl acetate both by (1) H HR-NMR (500 MHz) and (1) H and (19) F MR-NMR (43 MHz) as a model system. The parallel online measurement is realised by splitting the flow, which allows the adjustment of quantitative and independent flow rates, both in the HR-NMR probe as well as in the MR-NMR probe, in addition to a fast bypass line back to the reactor. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra are treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprise (i) direct integration, (ii) automated line fitting, (iii) indirect hard modelling (IHM) and (iv) partial least squares regression (PLS-R). To assess the potential of these evaluation strategies for MR-NMR, prediction results are compared with the line fitting data derived from the quantitative HR-NMR spectroscopy. Although, superior results are obtained from both IHM and PLS-R for (1) H MR-NMR, especially the latter demands for elaborate data pretreatment, whereas IHM models needed no previous alignment. Copyright © 2015 John Wiley & Sons, Ltd.

Spatially resolved chemical reaction monitoring using magnetic resonance imaging

Over the previous three decades, the use of MRI for studying dynamic physical and chemical processes of materials systems has grown significantly. This mini-review provides a brief introduction to relevant principles of MRI, including methods of spatial localization, factors contributing to image contrast, and chemical shift imaging. A few historical examples of (1) H MRI for reaction monitoring will be presented, followed by a review of recent research including (1) H MRI studies of gelation and biofilms, (1) H, (7) Li, and (11) B MRI studies of electrochemical systems, in vivo glucose metabolism monitored with (19) F MRI, and in situ temperature monitoring with (27) Al MRI. Copyright © 2015 John Wiley & Sons, Ltd.

Investigation of the reaction of 1,3-dimethylurea with formaldehyde by quantitative on-line NMR spectroscopy: a model for the urea-formaldehyde system

Quantitative on-line NMR spectroscopy is applied to study equilibria and reaction kinetics of the reaction of formaldehyde with 1,3-dimethylurea. This reaction system serves as a model system for the much more complex but industrially relevant urea-formaldehyde system. The aim is to study individual reactions and intermediates. The 1,3-dimethylurea-formaldehyde system undergoes only four reactions and, unlike urea-formaldehyde, does not form polymers. The following reactions are studied in detail: (1) the hydroxymethylation, (2) the formation of hemiformals of the hydroxymethylated intermediate, and (3) two condensation reactions of which the first leads to methylene bridges, the other to ether bridges. NMR spectroscopic chemical shift data of the reacting species are provided for the (1) H, (13) C, and (15) N domains. Equilibrium data of reactions (1), (2), and (3) are determined by quantitative (1) H and (13) C NMR spectroscopy at molar ratios of formaldehyde to 1,3-dimethylurea between 1:2 and 16:1 at a pH value of 8.5. Reaction kinetic experiments using an NMR spectrometer coupled to a batch reactor led to a reaction kinetic model parametrized with true species concentrations. The model takes into account reactions (1), (2), and (3). It describes the reaction system well for molar ratios of 1:1, 2:1, and 4:1, temperatures of 303 to 333K, and pH values from 5.0 to 9.5. Dilution experiments with a micro mixer coupled to the NMR spectrometer are conducted to estimate the time to equilibrium of reaction (2) of which the time constant is significantly lower than those of reactions (1) and (3). Copyright © 2015 John Wiley & Sons, Ltd.

Monitoring chemical reactions by low-field benchtop NMR at 45 MHz: pros and cons

Monitoring chemical reactions is the key to controlling chemical processes where NMR can provide support. High-field NMR gives detailed structural information on chemical compounds and reactions; however, it is expensive and complex to operate. Conversely, low-field NMR instruments are simple and relatively inexpensive alternatives. While low-field NMR does not provide the detailed information as the high-field instruments as a result of their smaller chemical shift dispersion and the complex secondary coupling, it remains of practical value as a process analytical technology (PAT) tool and is complimentary to other established methods, such as ReactIR and Raman spectroscopy. We have tested a picoSpin-45 (currently under ThermoFisher Scientific) benchtop NMR instrument to monitor three types of reactions by 1D (1) H NMR: a Fischer esterification, a Suzuki cross-coupling, and the formation of an oxime. The Fischer esterification is a relatively simple reaction run at high concentration and served as proof of concept. The Suzuki coupling is an example of a more complex, commonly used reaction involving overlapping signals. Finally, the oxime formation involved a reaction in two phases that cannot be monitored by other PAT tools. Here, we discuss the pros and cons of monitoring these reactions at a low-field of 45 MHz by 1D (1) H NMR. Copyright © 2015 John Wiley & Sons, Ltd.

Copper-catalyzed reactions: Research in the gas phase

Electrospray ionization mass spectrometry (ESI-MS) is becoming an important tool for mechanistic studies in organic and organometallic chemistry. It allows investigation of reaction mixtures including monitoring of reactants, products, and intermediates, studying properties of the intermediates and their reactivity. Studying the reactive species in the gas phase can be advantageously combined with theoretical calculations. This review is focused on ESI-MS studies of copper-catalyzed reactions. Possible effects of the electrospray process on the transfer of the copper complexes to the gas phase are discussed. The plethora of mass spectrometric approaches is demonstrated on copper mediated C-H activations, cross coupling reactions, rearrangements, organocuprate chemistry, and other examples.

Efficient Sustainable Tool for Monitoring Chemical Reactions and Structure Determination in Ionic Liquids by ESI-MS

An easy and convenient procedure is described for monitoring chemical reactions and characterization of compounds dissolved in ionic liquids using the well-known tandem mass spectrometry (MS/MS) technique. Generation of wastes was avoided by utilizing an easy procedure for analysis of ionic liquid systems without preliminary isolation and purification. The described procedure also decreased the risk of plausible contamination and damage of the ESI-MS hardware and increased sensitivity and accuracy of the measurements. ESI-MS detection in MS/MS mode was shown to be efficient in ionic liquids systems for structural and mechanistic studies, which are rather difficult otherwise. The developed ESI-MS/MS approach was applied to study samples corresponding to peptide systems in ionic liquids and to platform chemical directed biomass conversion in ionic liquids.

Raman spectroscopy as a tool for monitoring mesoscale continuous-flow organic synthesis: Equipment interface and assessment in four medicinally-relevant reactions

An apparatus is reported for real-time Raman monitoring of reactions performed using continuous-flow processing. Its capability is assessed by studying four reactions, all involving formation of products bearing α,β-unsaturated carbonyl moieties; synthesis of 3-acetylcoumarin, Knoevenagel and Claisen–Schmidt condensations, and a Biginelli reaction. In each case it is possible to monitor the reactions and also in one case, by means of a calibration curve, determine product conversion from Raman spectral data as corroborated by data obtained using NMR spectroscopy.