A Self-Healing System for Polydicyclopentadiene Thermosets

Self-healing offers promise for addressing structural failures, increasing lifespan, and improving durability in polymeric materials. Implementing self-healing in thermoset polymers faces significant manufacturing challenges, especially due to the elevated temperature requirements of thermoset processing. To introduce self-healing into structural thermosets, the self-healing system must be thermally stable and compatible with the thermoset chemistry. This article demonstrates a self-healing microcapsule-based system stable to frontal polymerization (FP), a rapid and energy-efficient manufacturing process with a self-propagating exothermic reaction (≈200 °C). A thermally latent Grubbs-type complex bearing two N-heterocyclic carbene ligands addresses limitations in conventional G2-based self-healing approaches. Under FP's elevated temperatures, the catalyst remains dormant until activated by a Cu(I) co-reagent, ensuring efficient polymerization of the dicyclopentadiene (DCPD) upon damage to the polyDCPD matrix. The two-part microcapsule system consists of one capsule containing the thermally latent Grubbs-type catalyst dissolved in the solvent, and another capsule containing a Cu(I) coagent blended with liquid DCPD monomer. Using the same chemistry for both matrix fabrication and healing results in strong interfaces as demonstrated by lap-shear tests. In an optimized system, the self-healing system restores the mechanical properties of the tough polyDCPD thermoset. Self-healing efficiencies greater than 90% via tapered double cantilever beam tests are observed.

Low-Loss Dielectric Ink for Printed Radio Frequency and Microwave Devices

Direct write printing is restricted by the lack of dielectric materials that can be printed with high resolution and offer dissipation factors at radio frequency (RF) within the range of commercial RF laminates. Herein, we outline the development of dielectric materials with dielectric loss below 0.006 in X and Ku frequency bands (8.2-18 GHz), the range required for radio frequency and microwave applications. The described materials were designed for printability and processability, specifically a prolonged viscosity below 1000 cps and a robust cure procedure, which requires minimal heat treatment. In the first stage of this work, nonpolar ring-opening metathesis polymerization (ROMP) is demonstrated at room temperature in an open-air environment with a low-viscosity monomer, 5-vinyl-2-norbornene, using the second-generation Grubbs catalyst (G-II). Differential scanning calorimetry (DSC) was used to study how the catalyst activity is increased with heating at various stages in the reaction, which is then used as a strategy to cure the material after printing. The resulting cured poly(5-vinyl-2-norbornene) material is then characterized for dielectric and mechanical performance before and after a secondary heat treatment, which mimics processing procedures to incorporate subsequent printed conductor layers for multilayer applications. After the secondary heat treatment, the material exhibits a 55.0% reduction in the coefficient of thermal expansion (CTE), an increase in glass-transition temperature (T_g) from 32.4 to 46.1 °C, and an increased 25 °C storage modulus from 428 to 1031 MPa while demonstrating a minimal change in dielectric loss. Lastly, samples of the developed dielectric material are printed with silver overtop to demonstrate how the material can be effectively incorporated into fully printed, multilayer RF applications.

Effect of Chain Structure on the Various Properties of the Copolymers of Fluorinated Norbornenes with Cyclooctene

Fluorinated polymers are attractive due to their special thermal, surface, gas separation, and other properties. In this study, new diblock, multiblock, and random copolymers of cyclooctene with two fluorinated norbornenes, 5-perfluorobutyl-2-norbornene and N-pentafluorophenyl-exo-endo-norbornene-5,6-dicarboximide, are synthesized by ring-opening metathesis copolymerization and macromolecular cross-metathesis in the presence of the first- to third-generation Grubbs' Ru-catalysts. Their thermal, surface, bulk, and solution characteristics are investigated and compared using differential scanning calorimetry, water contact angle measurements, gas permeation, and light scattering, respectively. It is demonstrated that they are correlated with the chain structure of the copolymers. The properties of multiblock copolymers are generally closer to those of diblock copolymers than of random ones, which can be explained by the presence of long blocks capable of self-organization. In particular, diblock and multiblock fluorine-imide-containing copolymers show a tendency to form micelles in chloroform solutions well below the overlap concentration. The results obtained may be of interest to a wide range of researchers involved in the design of functional copolymers.

A Facile Strategy for the Development of Recyclable Multifunctional Liquid Crystal Polymers via Post-Polymerization Modification and Ring-Opening Metathesis Polymerization

Post-polymerization modification (PPM) offers a versatile approach for engineering multifunctional polymers, but this advantage has not been fully exploited to fabricate multifunctional liquid crystal polymers (LCPs). Here, we design a facile synthetic approach towards multifunctional LCP by combining the ring-opening metathesis polymerization (ROMP) with PPM, in which ROMP helps to prepare a reactive LCP precursor with high molecular weight, and PPM provides a facilitation to introduce functional groups into the precursor. Consequently, a photo- and humidity-responsive linear LCP (LLCP) is demonstrated to show the potential of this synthetic strategy to diversify functions of the LCPs. Under light irradiation and humidity changes, the deformation modes of the LLCP films are converted to complex shapes (bending, twisting, and curling). The obtained dual-responsive LLCP with high molecular weight possesses excellent processability and recyclability, making it possible to construct 3D shape actuators with programmable deformation behaviors under light/humidity.

Regulating the Thermodynamics and Thermal Properties of Depolymerizable Polycyclooctenes through Substituent Effects

Chemical recycling to monomer (CRM) is a promising route for transitioning to a circular polymer economy. To develop new CRM systems with useful properties, it is important to understand the effects of monomer structure on polymerization/depolymerization behavior. In earlier work, this group demonstrated chemically recyclable polymers prepared by ring-opening metathesis polymerization of trans-cyclobutane fused cyclooctenes (tCBCO). Here, it is investigated how different substituents on cyclobutane impact the thermodynamics and thermal properties of tCBCO polymers. Introducing additional substituents to a cis-diester functionalized tCBCO is found to favor the conversion of polymerization; increased polymerization conversion is also observed when the cis-diester is isomerized into its trans counterpart. The effects of these structural features on the thermal properties are also studied. These findings can provide important insights into designing next-generation CRM polymers.

Chiral Polymers from Norbornenes Based on Renewable Chemical Feedstocks

Optically active polymers are of great interest as materials for dense enantioselective membranes, as well as chiral stationary phases for gas and liquid chromatography. Combining the versatility of norbornene chemistry and the advantages of chiral natural terpenes in one molecule will open up a facile route toward the synthesis of diverse optically active polymers. Herein, we prepared a set of new chiral monomers from cis-5-norbornene-2,3-dicarboxylic anhydride and chiral alcohols of various natures. Alcohols based on cyclic terpenes ((-)-menthol, (-)-borneol and pinanol), as well as commercially available alcohols (S-(-)-2-methylbutanol-1, S-(+)-3-octanol), were used. All the synthesized monomers were successfully involved in ring-opening metathesis polymerization, affording polymers in high yields (up to 96%) and with molecular weights in the range of 1.9 × 10⁵-5.8 × 10⁵ (M_w). The properties of the metathesis polymers obtained were studied by TGA and DSC analysis, WAXD, and circular dichroism spectroscopy. The polymers exhibited high thermal stability and good film-forming properties. Glass transition temperatures for the prepared polymers varied from -30 °C to +139 °C and, therefore, the state of the polymers changed from rubbery to glassy. The prepared polymers represent a new attractive platform of chiral polymeric materials for enantioselective membrane separation and chiral stationary phases for chromatography.

Bioactive PCL-Peptide and PLA-Peptide Brush Copolymers for Bone Tissue Engineering

We report the modular synthesis of bioactive brush-type polycaprolactone-peptide and polylactide-peptide copolymers for applications in bone tissue engineering. The brush copolymers containing pendant side chains of polycaprolactone (PCL) or polylactide (PLA) and PEGylated peptides, including linear Arg-Gly-Asp and collagen-like peptide (Gly-Pro-Hyp)3, were synthesized by ring-opening metathesis polymerization with high conversions and low dispersities (<1.5). These PCL-peptide and PLA-peptide copolymers exhibited good thermal stability for material processing using melt-extrusion-based methods. The copolymers were blended with commercial PCL or PLA, extruded into filaments, and 3D printed using fused filament fabrication methods. These bioactive PCL and PLA materials promoted osteogenic differentiation in vitro and showed good biocompatibility in in vivo murine model study. The promising results presented herein will serve as a useful guide for the design and functionalization of PCL or PLA materials for use in bone tissue engineering.

Anisotropic Foams via Frontal Polymerization

The properties of foams, an important class of cellular solids, are most sensitive to the volume fraction and openness of its elementary compartments; size, shape, orientation, and the interconnectedness of the cells are other important design attributes. Control of these morphological traits would allow the tailored fabrication of useful materials. While approaches like ice templating have produced foams with elongated cells, there is a need for rapid, versatile, and energy-efficient methods that also control the local order and macroscopic alignment of cellular elements. Here, a fast and convenient method is described to obtain anisotropic structural foams using frontal polymerization. Foams are fabricated by curing mixtures of dicyclopentadiene and a blowing agent via frontal ring-opening metathesis polymerization (FROMP). The materials are characterized using microcomputed tomography (micro-CT) and an image analysis protocol to quantify the morphological characteristics. The cellular structure, porosity, and hardness of the foams change with blowing agent, concentration, and resin viscosity. Moreover, a full factorial combination of variables is used to correlate each parameter with the structure of the obtained foams. The results demonstrate the controlled production of foams with specific morphologies using the simple and efficient method of frontal polymerization.

Overcoming the Low Driving Force in Forming Depolymerizable Polymers through Monomer Isomerization

While depolymerizable polymers have been intensely pursued as a potential solution to address the challenges in polymer sustainability, most depolymerization systems are characterized by a low driving force in polymerization, which poses difficulties for accessing diverse functionalities and architectures of polymers. Here, we address this challenge by using a cyclooctene-based depolymerization system, in which the cis-to-trans alkene isomerization significantly increases the ring strain energy to enable living ring-opening metathesis polymerization at monomer concentrations ≥0.025 M. An additional trans-cyclobutane fused at the 5,6-position of the cyclooctene reduces the ring strain energy of cyclooctene, enabling the corresponding polymers to depolymerize into the cis-cyclooctene monomers. The use of excess triphenylphosphine was found to be essential to suppress secondary metathesis and depolymerization. The high-driving-force living polymerization of the trans-cyclobutane fused trans-cyclooctene system holds promise for developing chemically recyclable polymers of a wide variety of polymer architectures.

Ring-Opening Metathesis Polymerization of a Macrobicyclic Olefin Bearing a Sacrificial Silyloxide Bridge

Ring-opening metathesis polymerization (ROMP) has been regarded as a powerful tool for sequence-controlled polymerization. However, the traditional entropy-driven ROMP of macrocyclic olefins suffers from the lack of ring strain and poor regioselectivity, whereas the relay-ring-closing metathesis polymerization inevitably brings some unnecessary auxiliary structure into each monomeric unit. We developed a macrobicyclic olefin system bearing a sacrificial silyloxide bridge on the α,β'-positions of the double bond as a new class of sequence-defined monomer for regioselective ROMP. The monomeric sequence information is implanted in the macro-ring, while the small ring, a 3-substituted cyclooctene structure with substantial ring tension, can provide not only narrow polydispersity, but also high regio-/stereospecificity. Besides, the silyloxide bridge can be sacrificially cleaved by desilylation and deoxygenation reactions to provide clean-structured, non-auxiliaried polymers.

Near-Infrared-Emitting Boron-Difluoride-Curcuminoid-Based Polymers Exhibiting Thermally Activated Delayed Fluorescence as Biological Imaging Probes

Near-infrared-emitting polymers were prepared using four boron-difluoride-curcuminoid-based monomers using ring-opening metathesis polymerization (ROMP). Well-defined polymers with molecular weights of ≈20 kDa and dispersities <1.07 were produced and exhibited near-infrared (NIR) emission in solution and in the solid state with photoluminescence quantum yields (Φ_PL ) as high as 0.72 and 0.18, respectively. Time-resolved emission spectroscopy revealed thermally activated delayed fluorescence (TADF) in polymers containing highly planar dopants, whereas room-temperature phosphorescence dominated with twisted species. Density functional theory demonstrated that rotation about the donor-acceptor linker can give rise to TADF, even where none would be expected based on calculations using ground-state geometries. Incorporation of TADF-active materials into water-soluble polymer dots (Pdots) gave NIR-emissive nanoparticles, and conjugation of these Pdots with antibodies enabled immunofluorescent labeling of SK-BR3 human breast-cancer cells.

An Ion-Pairing Approach to Stereoselective Metal-Free Ring-Opening Metathesis Polymerization

Stereochemistry can have a profound impact on polymer and materials properties. Unfortunately, straightforward methods for realizing high levels of stereocontrolled polymerizations are often challenging to achieve. In a departure from traditional metal-mediated ring-opening metathesis polymerization (ROMP), we discovered a remarkably simple method for controlling alkene stereochemistry in photoredox mediated metal-free ROMP. Ion-pairing, initiator sterics, and solvation effects each had profound impact on the stereochemistry of polynorbornene (PNB). Simple modifications to the reaction conditions produced PNB with trans alkene content of 25 to >98 %. High cis content was obtained from relatively larger counterions, toluene as solvent, low temperatures (-78 °C), and initiators with low Charton values. Conversely, smaller counterions, dichloromethane as solvent, and enol ethers with higher Charton values enabled production of PNB with high trans content. Data from a combined experimental and computational investigation are consistent with the stereocontrolling step of the radical cationic mechanism proceeding under thermodynamic control.

Crosslinked Polydicyclopentadiene Nanoparticles via Ring-Opening Metathesis Polymerization-Induced Self-Assembly Approach

In this communication, the preparation of crosslinked polydicyclopentadiene (PDCPD) nanoparticles via ring-opening metathesis polymerization (ROMP)-induced self-assembly approach is reported. For the ROMPs, the macromolecular chain transfer agents (Macro-CTAs) are synthesized via the ring-opening polymerization (ROP) of ε-caprolactone (CL) with cis-2-butene-1,4-diol as the initiator. The ROMPs are performed with chloroform, tetrahydrofuran, toluene, 1,4-dioxane, and N,N-dimethylacetamide as the solvents, respectively, which are catalyzed with Grubbs second generation catalyst. It is found that the crosslinked PDCPD nanoparticles are obtained with spherical, cylindrical to planar morphologies, depending on the molecular weights of Macro-CTAs, the concentrations of DCPD and the natures of solvents. The polymerization induced self-assembly (ROMPISA) by the use of a non-norbornene-based macromolecular chain transfer agent provides a new and efficient approach to prepare crosslinked polymer nanoparticles.

A Boron Difluoride Hydrazone (BODIHY) Polymer Exhibits Aggregation-Induced Emission

Polymers that exhibit aggregation-induced emission (AIE) find use, for example, as cell-imaging agents and as fluorometric sensors due to their unique optical properties. However, the structural diversity of AIE-active polymers has not necessarily advanced at the same rate as their applications. In this work, ring-opening metathesis polymerization is used to synthesize the first example of a polymer (M_n  = 61,600 g mol^-1 , Đ = 1.32) containing boron difluoride hydrazone (BODIHY) heterocycles in its repeating unit. The BODIHY monomer and polymer described absorb and emit in the visible region in solution (λ_abs  = 428 and 429 nm, λ_em  = 528 and 526 nm) and as thin films (λ_abs  = 443 and 440 nm, λ_em  = 535 and 534 nm). Monomer (Φ_Film  = 10%) and polymer (Φ_Film  = 6%) exhibit enhanced emission as thin films compared to solution (Φ_Soln  ≤ 1%) as well as AIE upon the addition of water to DMF solutions as a result of restriction of intramolecular motion. Enhancement factors for the monomer and polymer are determined to be 58 and 15, respectively. The title BODIHY polymer exhibited an earlier onset of AIE and enhanced sensitivity to solution viscosity when compared to the parent monomer.

Influence of Interfacial Bonding on the Mechanical and Impact Properties Ring-Opening Metathesis Polymer (ROMP) Silica Composites

Polymers formed by ring-opening metathesis polymerization (ROMP) such as poly(dicyclopentadiene) (pDCPD) exhibit a technologically desirable combination of high toughness, high glass transition temperature, and outstanding low-temperature performance. However, because of their nonpolar molecular structure, they tend to suffer from relatively low elastic moduli and poor adhesion to common fillers, fibers, and substrates, limiting their utility as adhesives and composite binders without specialized bonding agents. Here, we investigate the mechanical properties of a pDCPD-based copolymer filled with well-defined spherical microparticles having four distinct surface chemistries capable of strong, moderate, or weak bonding to the matrix with surfaces ranging from polar to nonpolar. Measurements in uniaxial tension, quasi-static fracture, and high-velocity impact are complemented by digital image correlation (DIC), scanning electron microscopy (SEM) fractography, and X-ray computed tomography (X-μCT) of subcritically loaded crack tips, yielding insight into the complex roles played by interfacial bonding in strength, stiffness, and toughening mechanisms of an already tough polymer. Analysis using quantitative fracture and impact mechanism models provided valuable guidelines for designing heterogeneous systems that combine structural and tough performance.

Photoinduced Strain-Assisted Synthesis of a Stiff-Stilbene Polymer by Ring-Opening Metathesis Polymerization

Developing a novel strategy to synthesize photoresponsive polymers is of significance owing to their potential applications. We report a photoinduced strain-assisted synthesis of main-chain stiff-stilbene polymers by using ring-opening metathesis polymerization (ROMP), activating a macrocyclic π-bond connected to a stiff-stilbene photoswitch through a linker. Since the linker acts as an external constraint, the photoisomerization to the E-form leads to the stiff-stilbene being strained and thus reactive to ROMP. The photoisomerization of Z-form to E-form was investigated using time-dependent NMR studies and UV/Vis spectroscopy. The DFT calculation showed that the E-form was less stable due to a lack of planarity. By the internal strain developed due to the linker constraint through photoisomerization, the E-form underwent ROMP by a second generation Grubbs catalyst. In contrast, Z-form did not undergo polymerization under similar conditions. The MALDI-TOF spectrum of E-form after polymerization showed the presence of oligomers of >5.2 kDa.

Synthesis, conjugating capacity and biocompatibility evaluation of a novel amphiphilic polynorbornene

Polynorbornenes, prepared by the ‘living’ and ‘controlled’ ring-opening metathesis polymerization (ROMP) method, have emerged as a stimuli-sensitive new class of polymer carriers. Herein, we reported a novel amphiphilic diblock polynorbornene, PNCHO-b-PNTEG, containing active benzaldehyde units, which exhibited good conjugating capacity to amino-containing molecules (e.g., doxorubicin (DOX)) via the pH-sensitive Schiff base linkage. The copolymer and its conjugate with DOX, DOX-PNCHO-b-PNTEG, were adequately analyzed by various techniques including ¹H NMR, ¹³C NMR, gel permeation chromatography, etc. Especially, the formed conjugate of DOX-PNCHO-b-PNTEG could self-assemble into near-spherical micelles with the diameter of 81 ± 10 nm, and exhibit acid-triggered DOX release behavior, and the release rate could be adjusted by changing the environmental pH value. The excellent biological safety of PNCHO-b-PNTEG was further demonstrated by the results from both in vitro toxicity evaluation to murine fibroblast cells (L-929 cells) and in vivo evaluation of acute developmental toxicity and cell death in zebrafish embryos. Hence, the present polynorbornene-based PNCHO-b-PNTEG possesses great potential application as a biocompatible polymeric carrier and could be employed to fabricate various pH-sensitive conjugates.

Design, Synthesis, and Self-Assembly of Janus Bottlebrush Polymers

Janus bottlebrush polymers are a class of special molecular brushes, which have two immiscible side chains on the repeating unit of the backbone. The characteristic architectures of Janus bottlebrush polymers enable unique self-assembly properties and broad applications. Recently, remarkable advances of Janus bottlebrush polymers have been achieved for polymer chemistry and material science. This review summarizes the synthetic strategies of Janus bottlebrush polymers, and highlights the self-assembly applications. Finally, the challenges and opportunities are proposed for the further development.

Ring-Opening Metathesis Polymerization of endo- and exo-Norbornene Lactones

New ester-functionalized bicyclic aliphatic polymers are synthesized through the ring-opening metathesis polymerization (ROMP) of endo- and exo-norbornene lactones (endo-NBL and exo-NBL) and their oxa-norbornene analogue (exo-oxa-NBL) followed by hydrogenation. The polymerizability between endo- and exo-NBLs, and the thermal properties between the six types of polymers before and after hydrogenation are compared and discussed. The ROMP of all three monomers proceeded in a living fashion under optimized conditions, which is confirmed by chain extension experiments. Endo-NBL shows a much lower homo- and copolymerizability than exo-NBL probably owing to six-membered chelation to the Ru center and steric hindrance in the ruthenacyclobutane intermediate. Stereo-block and stereo-gradient copolymers of poly(endo-NBL) and poly(exo-NBL) are also synthesized. The hydrogenation catalyzed by RuHCl(CO)(PPh₃ )₃ in the mixed solvents of o-xylene and N,N-dimethyl acetamide (DMAc) results in more than 95% conversion. The obtained hydrogenated polymers, H-poly(endo-NBL) and H-poly(exo-NBL), are amorphous, soluble in chlorinated aliphatic solvents, and thermally stable until 400 °C without a weight loss. Their glass transition temperatures are 163 and 131 °C, respectively; the values are appropriate in terms of both thermal stability and processing deformation for the application of transparent resin materials.

Synthesis and Characterization of Anionic Poly(cyclopentadienylene vinylene) and Its Use in Conductive Hydrogels

The use of π-conjugated polymers (CPs) in conductive hydrogels remains challenging due to the water-insoluble nature of most CPs. Conjugated polyelectrolytes (CPEs) are promising alternatives because they have tunable electronic properties and high water-solubility, but they are often difficult to synthesize and thus have not been widely adopted. Herein, we report the synthesis of an anionic poly(cyclopentadienylene vinylene) (aPCPV) from an insulating precursor under mild conditions and in high yield. Functionalized aPCPV is a highly water-soluble CPE that exhibits low cytotoxicity, and we found that doping hydrogels with aPCPV imparts conductivity. We also anticipate that this synthetic strategy, due to its ease and high efficiency, will be widely used to create families of not-yet-explored π-conjugated vinylene polymers.

PEG/PPG-PDMS-Adamantane-based Crosslinked Terpolymer Using the ROMP Technique to Prepare a Highly Permeable and CO2-Selective Polymer Membrane

In this study, precursor molecules based on PEG/PPG and polydimethylsiloxane (PDMS), both widely used rubbery polymers, were copolymerized with bulky adamantane into copolymer membranes. Ring-opening metathesis polymerization (ROMP) was employed during the polymerization process to create a structure with both ends crosslinked. The precursor molecules and corresponding polymer membranes were characterized using various analytical methods. The polymer membranes were fabricated using different compositions of PDMS and adamantane, to determine how the network structure affected their gas separation performance. PEG/PPG, in which CO2 is highly soluble, was copolymerized with PDMS, which has high permeability, and adamantane, which controlled the crosslinking density with a rigid and bulky structure. It was confirmed that the resulting crosslinked polymer membranes exhibited high solubility and diffusivity for CO2. Further, their crosslinked structure using ROMP technique made it possible to form good films. The membranes fabricated in the present study exhibited excellent performance, i.e., CO2 permeability of up to 514.5 Barrer and CO2/N2 selectivity of 50.9.

Cell Engineering with Functional Poly(oxanorbornene) Block Copolymers

Cell-based therapies are gaining prominence in treating a wide variety of diseases and using synthetic polymers to manipulate these cells provides an opportunity to impart function that could not be achieved using solely genetic means. Herein, we describe the utility of functional block copolymers synthesized by ring-opening metathesis polymerization (ROMP) that can insert directly into the cell membrane via the incorporation of long alkyl chains into a short polymer block leading to non-covalent, hydrophobic interactions with the lipid bilayer. Furthermore, we demonstrate that these polymers can be imbued with advanced functionalities. A photosensitizer was incorporated into these polymers to enable spatially controlled cell death by the localized generation of 1 O2 at the cell surface in response to red-light irradiation. In a broader context, we believe our polymer insertion strategy could be used as a general methodology to impart functionality onto cell-surfaces.

Efficient Synthesis of Asymmetric Miktoarm Star Polymers

Asymmetric miktoarm star polymers comprising an unequal number of chemically-distinct blocks connected at a common junction produce unique material properties, yet existing synthetic strategies are beleaguered by complicated reaction schemes that are restricted in both monomer scope and yield. Here, we introduce a new synthetic approach coined "μSTAR" - Miktoarm Synthesis by Termination After Ring-opening metathesis polymerization - that circumvents these traditional synthetic limitations by constructing the block-block junction in a scalable, one-pot process involving (1) grafting-through polymerization of a macromonomer followed by (2) in-situ enyne-mediated termination to install a single mikto-arm with exceptional efficiency. This modular μSTAR platform cleanly generates AB n and A(BA') n miktoarm star polymers with unprecedented versatility in the selection of A and B chemistries as demonstrated using many common polymer building blocks: poly(siloxane), poly(acrylate), poly(methacrylate), poly(ether), poly(ester), and poly(styrene). The average number of B or BA' arms (n) is easily controlled by the molar equivalents of macromonomer relative to Grubbs catalyst in the initial ring-opening metathesis polymerization step. While these materials are characterized by dispersity in n that arises from polymerization statistics, they self-assemble into mesophases that are identical to those predicted for precise miktoarm stars as evidenced by small-angle X-ray scattering experiments and self-consistent field theory simulations. In summary, the μSTAR technique provides a significant boost in design flexibility and synthetic simplicity while retaining the salient phase behavior of precise miktoarm star materials.

Unprecedented Selectivity of Ruthenium Iodide Benzylidenes in Olefin Metathesis Reactions

The development of selective olefin metathesis catalysts is crucial to achieving new synthetic pathways. Herein, we show that cis-diiodo/sulfur-chelated ruthenium benzylidenes do not react with strained cycloalkenes and internal olefins, but can effectively catalyze metathesis reactions of terminal dienes. Surprisingly, internal olefins may partake in olefin metathesis reactions once the ruthenium methylidene intermediate has been generated. This unexpected behavior allows the facile formation of strained cis-cyclooctene by the RCM reaction of 1,9-undecadiene. Moreover, cis-1,4-polybutadiene may be transformed into small cyclic molecules, including its smallest precursor, 1,5-cyclooctadiene, by the use of this novel sequence. Norbornenes, including the reactive dicyclopentadiene (DCPD), remain unscathed even in the presence of terminal olefin substrates as they are too bulky to approach the diiodo ruthenium methylidene. The experimental results are accompanied by thorough DFT calculations.

An Efficient Ring-Closure Method for Preparing Well-Defined Cyclic Polynorbornenes

An efficient bimolecular ring-closure method is developed to prepare the well-defined cyclic polynorbornenes by combining the living ring-opening metathesis polymerization (ROMP) with the self-accelerating double strain-promoted azide-alkyne cycloaddition (DSPAAC) reaction. In this method, ROMP is used to synthesize the well-defined linear polynorbornenes with both azide terminals by virtue of a N-hydroxysuccinimide-ester-functionalized Grubbs initiator following the modification of polymer end groups. DSPAAC click reaction is then used to ring-close the linear polymer precursors and prepare the corresponding well-defined cyclic polynorbornenes using the sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) as small linkers. The self-accelerating DSPAAC ring-closing reaction facilitates this method to efficiently prepare pure cyclic polynorbornenes in the presence of a molar excess of DIBOD small linkers to the linear polynorbornene precursors. This is the first report to prepare well-defined polynorbornenes with cyclic topology based on the ring-closure strategy for cyclic polymers.

Barbiturate derived amphiphilic homopolymers: synthesis, characterization, self-assembly and anticancer drug delivery

Aim: Our aim was to synthesis and characterization of amphiphilic norbornene-derived thiobarbiturate homopolymers (NDTH 1-4) for drug delivery. Methods: Ring-opening metathesis polymerization technique was used to prepare a series of homopolymers. The hydrophobicity is introduced by increasing the number of carbon chains ([-CH₂-]_n; n = 1, 2, 3 & 4) in between norbornene backbone and thiobarbiturate species. Results: These vesicular aggregates have been used as anticancer Doxorubicin drug delivery vehicles at the acidic (5.5) and physiological (7.4) pHs. Confocal laser-scanning microscopy has demonstrated that the drug-loaded vesicles are easily internalized into living cells. Conclusion: Amphiphilic norbornene-derived thiobarbiturate homopolymer assemblies showed efficient nanocarrier for effective anticancer drug delivery.

Expanding the materials space of DNA via organic-phase ring-opening metathesis polymerization

Herein, we develop a facile route to bring DNA to the organic phase, which greatly expands the types of structures accessible using DNA macromonomers. Phosphotriester- and exocyclic amine-protected DNA was synthesized and further modified with a norbornene moiety, which enables homopolymerization via ring-opening metathesis to produce brush-type DNA graft polymers in high yields. Subsequent deprotection cleanly reveals the natural phosphodiester DNA. The method not only achieves high molecular weight DNA graft polymers but when carried out at low monomer:catalyst ratios, yields oligomers that can be further fractionated to molecularly pure, monodisperse entities with one through ten DNA strands per molecule. In addition, we demonstrate substantial simplification in the preparation of traditionally difficult DNA-containing structures, such as DNA/poly(ethylene glycol) diblock graft copolymers and DNA amphiphiles. We envision that the marriage of oligonucleotides with the vast range of organic-phase polymerizations will result in many new classes of materials with yet unknown properties.

The ROMP: A Powerful Approach to Synthesize Novel pH-Sensitive Nanoparticles for Tumor Therapy

Fast clearance, metabolism, and systemic toxicity are major limits for the clinical use of anti-cancer drugs. Histone deacetylase inhibitors (HDACi) present these defects, despite displaying promising anti-tumor properties on tumor cells in vitro and in in vivo models of cancer. The specific delivery of anti-cancer drugs into the tumor should improve their clinical benefit by limiting systemic toxicity and by increasing the anti-tumor effect. This paper deals with the synthesis of the polymeric nanoparticle platform, which was produced by Ring-Opening Metathesis Polymerization (ROMP), able to release anti-cancer drugs in dispersion, such as histone deacetylase inhibitors, into mesothelioma tumors. The core-shell nanoparticles (NPs) have stealth properties due to their poly(ethylene oxide) shell and can be viewed as universal nano-carriers on which any alkyne-modified anti-cancer molecule can be grafted by click chemistry. A cleavage reaction of the chemical bond between NPs and drugs through the contact of NPs with a medium presenting an acidic pH, which is typically a cancer tumor environment or an acidic intracellular compartment, induces a controlled release of the bioactive molecule in its native form. In our in vivo syngeneic model of mesothelioma, a highly selective accumulation of the particles in the tumor was obtained. The release of the drugs led to an 80% reduction of tumor weight for the best compound without toxicity. Our work demonstrates that the use of theranostic nanovectors leads to an optimized delivery of epigenetic inhibitors in tumors, which improves their anti-tumor properties in vivo.

Chemoselective, Postpolymerization Modification of Bioactive, Degradable Polymers

Degradable polymers promote sustainability, mitigate environmental impact, and facilitate biological applications. Tailoring degradable polymers is challenging because installing functional group-rich side chains is difficult when the backbone itself is susceptible to degradation. A convenient means of side chain installation is through postpolymerization modification (PPM). In functionalizing polyoxazinones, a class of degradable polymers generated by the ring-opening metathesis polymerization (ROMP), we predictably found PPM challenging. Even the versatile azide-alkyne cycloaddition click reaction was ineffective. To solve this problem, we screened PPM reactions whose efficiencies could be assessed using photochemistry (excimer formation). The mildest, pH-neutral process was functionalization of a ketone-containing polymer to yield either oxime (acid labile)- or alkyoxylamine (stable)-substituted polymers. Using this approach, we equipped polymers with fluorophores, reporter groups, and bioactive epitopes. These modifications imbued the polymers with distinctive spectral properties and biological activities. Thus, polyoxazinones are now tunable through a modular method to diversify these macromolecules' function.

Triply Loaded Nitroxide Brush-Arm Star Polymers Enable Metal-Free Millimetric Tumor Detection by Magnetic Resonance Imaging

Nitroxides occupy a privileged position among plausible metal-free magnetic resonance imaging (MRI) contrast agents (CAs) due to their inherently low-toxicity profiles; nevertheless, their translational development has been hindered by a lack of appropriate contrast sensitivity. Nanostructured materials with high nitroxide densities, where each individual nitroxide within a macromolecular construct contributes to the image contrast, could address this limitation, but the synthesis of such materials remains challenging. Here, we report a modular and scalable synthetic approach to nitroxide-based brush-arm star polymer (BASP) organic radical CAs (ORCAs) with high nitroxide loadings. The optimized ∼30 nm diameter "BASP-ORCA3" displays outstanding T2 sensitivity with a very high molecular transverse relaxivity ( r2 > 1000 mM-1 s-1). BASP-ORCA3 further exhibits excellent stability in vivo, no acute toxicity, and highly desirable pharmacokinetic and biodistribution profiles for longitudinal detection of tumors by MRI. When injected intravenously into mice bearing subcutaneous plasmacytomas, BASP-ORCA3 affords distinct in vivo visualization of tumors on translationally relevant time scales. Leveraging its high sensitivity, BASP-ORCA3 enables efficient mapping of tumor necrosis, which is an important biomarker to predict therapeutic outcomes. Moreover, BASP-ORCA3 allows for detection of millimetric tumor implants in a disseminated murine model of advanced-stage human ovarian cancer that possess genetic, histological, and vascular characteristics that are similar to those seen in patients. This work establishes BASP-ORCA3 as a promising metal-free spin contrast agent for MRI.

α,ω-Epoxide, Oxetane, and Dithiocarbonate Telechelic Copolyolefins: Access by Ring-Opening Metathesis/Cross-Metathesis Polymerization (ROMP/CM) of Cycloolefins in the Presence of Functional Symmetric Chain-Transfer Agents

Epoxide- and oxetane-α,ω-telechelic (co)polyolefins have been successfully synthesized by the tandem ring-opening metathesis polymerization (ROMP)/cross-metathesis (CM) of cyclic olefins using Grubbs' second-generation catalyst (G2) in the presence of a bifunctional symmetric alkene epoxide- or oxetane-functionalized chain-transfer agent (CTA). From cyclooctene (COE), trans,trans,cis-1,5,9-cyclododecatriene (CDT), norbornene (NB), and methyl 5-norbornene-2-carboxylate (NB^COOMe), with bis(oxiran-2-ylmethyl) maleate (CTA 1), bis(oxetane-2-ylmethyl) maleate (CTA 2), or bis(oxetane-2-ylmethyl) (E)-hex-3-enedioate (CTA 3), well-defined α,ω-di(epoxide or oxetane) telechelic PCOEs, P(COE-co-NB or -NB^COOMe)s, and P(NB-co-CDT)s were isolated under mild operating conditions (40 or 60 °C, 24 h). The oxetane CTA 3 and the epoxide CTA 1 were revealed to be significantly more efficient in the CM step than CTA 2, which apparently inhibits the reaction. Quantitative dithiocarbonatation (CS₂/LiBr, 40 °C, THF) of an α,ω-di(epoxide) telechelic P(NB-co-CDT) afforded a convenient approach to the analogous α,ω-bis(dithiocarbonate) telechelic P(NB-co-CDT). The nature of the end-capping function of the epoxide/oxetane/dithiocarbonate telechelic P(NB-co-CDT)s did not impact their thermal signature, as measured by DSC. These copolymers also displayed a low viscosity liquid-like behavior and a shear thinning rheological behavior.

Functional Precision Polymers via Stereo- and Regioselective Polymerization Using Group 6 Metal Alkylidene and Group 6 and 8 Metal Alkylidene N-Heterocyclic Carbene Complexes

The concepts of functional precision polymers and the latest accomplishments in their synthesis are summarized. Synthetic concepts based on chain growth polymerization are compared to iterative synthetic approaches. Here, the term "functional precision polymers" refers to polymers that are not solely hydrocarbon-based but contain functional groups and are characterized by a highly ordered primary structure. If insertion polymerization is used for their synthesis, olefin metathesis-based polymerization techniques, that is, ring-opening metathesis polymerization (ROMP), acyclic diene metathesis (ADMET) polymerization, and the regio- and stereoselective cyclopolymerization of α,ω-diynes are almost exclusively applied. Particularly with regio- and stereospecific ROMP and with cyclopolymerization, the synthesis of tactic polymers and copolymers with high regio-, stereo-, and sequence control can be accomplished; however, it requires carefully tailored transition metal catalysts. The fundamental synthetic concepts and strategies are outlined.

Effect of Cross-Link Density on Carbon Dioxide Separation in Polydimethylsiloxane-Norbornene Membranes

The development of high-performance materials for carbon dioxide separation and capture will significantly contribute to a solution for climate change. Herein, (bicycloheptenyl)ethyl-terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO2 permeability≈6800 Barrer; CO2 /N2 selectivity≈14) is very promising for practical applications. The key to achieving this high performance is the use of an in situ cross-linking method for difunctional PDMS macromonomers, which provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy, and gas solubility measurements, key parameters necessary for achieving excellent performance have been elucidated.

Novel Photoresponsive Linear, Graft, and Comb-Like Copolymers with Azobenzene Chromophores in the Main-Chain and/or Side-Chain: Facile One-Pot Synthesis and Photoresponse Properties

Novel photoresponsive linear, graft, and comb-like copolymers with azobenzene chromophores in the main-chain and/or side-chain are prepared via a sequential ring-opening metathesis polymerization (ROMP) and head-to-tail acyclic diene metathesis (ADMET) polymerization in a one-pot procedure using Grubbs ruthenium-based catalysts. The diluted solutions of these as-prepared copolymers containing azobenzene chromophores exhibit photochemical trans-cis isomerization under the irradiation of UV light, followed by their cis-trans back-isomerization in visible light. The rates of photoisomerization are found to be slower than those of back-isomerization, and the rate for the comb-like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side-chain graft structure.

N-heterocyclic carbene, high oxidation state molybdenum alkylidene complexes: functional-group-tolerant cationic metathesis catalysts

We synthesized the first N-heterocyclic carbene (NHC) complexes of Schrock's molybdenum imido alkylidene bis(triflate) complexes. Unlike existing bis(triflate) complexes, the novel 16-electron complexes represent metathesis active, functional-group-tolerant catalysts. Single-crystal X-ray structures of two representatives of this novel class of Schrock catalysts are presented and reactivity is discussed in view of their structural peculiarities. In the presence of monomer (substrate), these catalysts form cationic species and can be employed in ring-closing metathesis (RCM), ring-opening metathesis polymerization (ROMP), as well as in the cyclopolymerization of α,ω-diynes. Monomers containing functional groups, which are not tolerated by the existing variations of Schrock's catalyst, e.g., sec-amine, hydroxy, and carboxylic acid moieties, can be used. These catalysts therefore hold great promise in both organic and polymer chemistry, where they allow for the use of protic monomers.