The Effects of Light Spectrum and Intensity, Seeding Density, and Fertilization on Biomass, Morphology, and Resource Use Efficiency in Three Species of Brassicaceae Microgreens

Light is a critical component of indoor plant cultivation, as different wavelengths can influence both the physiology and morphology of plants. Furthermore, fertilization and seeding density can also potentially interact with the light recipe to affect production outcomes. However, maximizing production is an ongoing research topic, and it is often divested from resource use efficiencies. In this study, three species of microgreens-kohlrabi; mustard; and radish-were grown under five light recipes; with and without fertilizer; and at two seeding densities. We found that the different light recipes had significant effects on biomass accumulation. More specifically, we found that Far-Red light was significantly positively associated with biomass accumulation, as well as improvements in height, leaf area, and leaf weight. We also found a less strong but positive correlation with increasing amounts of Green light and biomass. Red light was negatively associated with biomass accumulation, and Blue light showed a concave downward response. We found that fertilizer improved biomass by a factor of 1.60 across species and that using a high seeding density was 37% more spatially productive. Overall, we found that it was primarily the main effects that explained microgreen production variation, and there were very few instances of significant interactions between light recipe, fertilization, and seeding density. To contextualize the cost of producing these microgreens, we also measured resource use efficiencies and found that the cheaper 24-volt LEDs at a high seeding density with fertilizer were the most efficient production environment for biomass. Therefore, this study has shown that, even with a short growing period of only four days, there was a significant influence of light recipe, fertilization, and seeding density that can change morphology, biomass accumulation, and resource input costs.

Effect of inoculation density of bone marrow mesenchymal stem cells cultured on calcium phosphate cement scaffold on osteogenic differentiation

BACKGROUND

Calcium phosphate cements (CPCs) are biocompatible materials that have been evaluated as scaffolds in bone tissue engineering. At present, the stem cell density of inoculation on CPC scaffold varies.

OBJECTIVE

The aim of this study is to analyze the effect of seeding densities on cell growth and osteogenic differentiation of bone marrow mesenchymal stem cells (BMMSCs) on a calcium phosphate cements (CPCs) scaffold.

METHODS

BMMSCs derived from minipigs were seeded onto a CPC scaffold at three densities [1 million/mL (1M), 5 million/mL (5M) and 25 million/mL 25M)], and cultured for osteogenic induction for 1, 4 and 8 days.

RESULTS

Well adhered and extended BMMSCs on the CPC scaffold showed significantly different proliferation rates within each seeding density group at different time points (P < 0.05). The number of live cells per unit area in 1M, 5M and 25M increased by 3.5, 3.9 and 2.5 folds respectively. The expression of ALP peaked at 4 days post inoculation with the fold-change being 2.6 and 2.8 times higher in 5M and 25M respectively as compared to 1M. The expression levels of OC, Coll-1 and Runx-2 peaked at 8 days post inoculation.

CONCLUSIONS

An optimal seeding density may be more conducive for cell proliferation, differentiation, and extracellular matrix synthesis on scaffolds. We suggest the optimal seeding density should be 5 million/mL.

[Research progress of different cell seeding densities and cell ratios in cartilage tissue engineering]

OBJECTIVE

To review the research progress of different cell seeding densities and cell ratios in cartilage tissue engineering.

METHODS

The literature about tissue engineered cartilage constructed with three-dimensional scaffold was extensively reviewed, and the seeding densities and ratios of most commonly used seed cells were summarized.

RESULTS

Articular chondrocytes (ACHs) and bone marrow mesenchymal stem cells (BMSCs) are the most commonly used seed cells, and they can induce hyaline cartilage formation in vitro and in vivo. Cell seeding density and cell ratio both play important roles in cartilage formation. Tissue engineered cartilage with good quality can be produced when the cell seeding density of ACHs or BMSCs reaches or exceeds that in normal articular cartilage. Under the same culture conditions, the ability of pure BMSCs to build hyaline cartilage is weeker than that of pure ACHs or co-culture of both.

CONCLUSION

Due to the effect of scaffold materials, growth factors, and cell passages, optimal cell seeding density and cell ratio need further study.

Effect of cell density on formation of three-dimensional cartilaginous constructs using fibrin & human osteoarthritic chondrocytes

Background & objectives:

Seeding density is one of the major parameters affecting the quality of tissue-engineered cartilage. The objective of this study was to evaluate different seeding densities of osteoarthritis chondrocytes (OACs) to obtain the highest quality cartilage.

Methods:

The OACs were expanded from passage 0 (P0) to P3, and cells in each passage were analyzed for gross morphology, growth rate, RNA expression and immunochemistry (IHC). The harvested OACs were assigned into two groups: low (1×10⁷ cells/ml) and high (3×10⁷ cells/ml) cell density. Three-dimensional (3D) constructs for each group were created using polymerised fibrin and cultured for 7, 14 and 21 days in vitro using chondrocyte growth medium. OAC constructs were analyzed with gross assessments and microscopic evaluation using standard histology, IHC and immunofluorescence staining, in addition to gene expression and biochemical analyses to evaluate tissue development.

Results:

Constructs with a high seeding density of 3×10⁷ cells/ml were associated with better quality cartilage-like tissue than those seeded with 1×10⁷ cells/ml based on overall tissue formation, cell association and extracellular matrix distribution. The chondrogenic properties of the constructs were further confirmed by the expression of genes encoding aggrecan core protein and collagen type II.

Interpretation & conclusions:

Our results confirmed that cell density was a significant factor affecting cell behaviour and aggregate production, and this was important for establishing good quality cartilage.

Bench-to-bedside optimization of mesenchymal stem cell isolation, processing, and expansion for in vivo administration

Aim: In this study, we aimed at identifying the optimal conditions for isolation, processing and expansion of mesenchymal stem cells (MSCs). Methods: Porcine bone marrow was obtained from either small- or large-volume bone marrow aspirate (BMA). Next, three BMA processing methods were compared. Finally, the best condition was selected from various culture parameters, including basal media, supplementation and seeding density. Results: Our results demonstrate that a small-volume BMA and direct plating yields significantly higher concentration of MSCs. Basal media supplementation with 10% platelet lysate and seeding density of 1000 cells/cm² can generate large numbers of multipotent MSCs with augmented function and low population doublings. Conclusion: This work provides guidance for preparation of robust MSCs for future clinical trials.

Canola Root-Associated Microbiomes in the Canadian Prairies

Canola is one of the most economically important crops in Canada, and the root and rhizosphere microbiomes of a canola plant likely impact its growth and nutrient uptake. The aim of this study was to determine whether canola has a core root microbiome (i.e., set of microbes that are consistently selected in the root environment), and whether this is distinct from the core microbiomes of other crops that are commonly grown in the Canadian Prairies, pea, and wheat. We also assessed whether selected agronomic treatments can modify the canola microbiome, and whether this was associated to enhanced yield. We used a field experiment with a randomized complete block design, which was repeated at three locations across the canola-growing zone of Canada. Roots and rhizosphere soil were harvested at the flowering stage of canola. We separately isolated total extractable DNA from plant roots and from adjacent rhizosphere soil, and constructed MiSeq amplicon libraries for each of 60 samples, targeting bacterial, and archaeal 16S rRNA genes and the fungal ITS region. We determined that the microbiome of the roots and rhizosphere of canola was consistently different from those of wheat and pea. These microbiomes comprise several putative plant-growth-promoting rhizobacteria, including Amycolatopsis sp., Serratia proteamaculans, Pedobacter sp., Arthrobacter sp., Stenotrophomonas sp., Fusarium merismoides, and Fusicolla sp., which correlated positively with canola yield. Crop species had a significant influence on bacterial and fungal assemblages, especially within the roots, while higher nutrient input or seeding density did not significantly alter the global composition of bacterial, fungal, or archaeal assemblages associated with canola roots. However, the relative abundance of Olpidium brassicae, a known pathogen of members of the Brassicaceae, was significantly reduced in the roots of canola planted at higher seeding density. Our results suggest that seeding density and plant nutrition management modified the abundance of other bacterial and fungal taxa forming the core microbiomes of canola that are expected to impact crop growth. This work helps us to understand the microbial assemblages associated with canola grown under common agronomic practices and indicates microorganisms that can potentially benefit or reduce the yield of canola.

Constant Isothiocyanate-Release Potentials across Biofumigant Seeding Rates

Biofumigation is an integrated pest-management method involving the mulching of a glucosinolate-containing cover crop into a field in order to generate toxic isothiocyanates (ITCs), which are effective soil-borne-pest-control compounds. Variation in biofumigation efficacy demonstrates a need to better understand the factors affecting pest-control outcomes and develop best practices for choosing biofumigants, growth conditions, and mulching methods that allow the greatest potential isothiocyanate release. We measured the glucosinolate concentrations of six different commercial varieties of three biofumigant plant species: Brassica juncea (ISCI99, Vitasso, and Scala) Raphanus sativus (Diablo and Bento), and Sinapis alba (Ida Gold). The plants were grown in the range of commercially appropriate seeding rates and sampled at three growth stages (early development, mature, and 50% flowering). Within biofumigant species, the highest ITC-release potentials were achieved with B. juncea cv. ISCI99 and R. sativus cv. Bento. The highest ITC-release potential occurred at the 50% flowering growth stage across the species. The seeding rate had a minor impact on the ITC-release potential of R. sativus but had no significant effects on the ITC-release potentials of the B. juncea or S. alba cultivars.

Structure-function relationships in the stem cell's mechanical world B: emergent anisotropy of the cytoskeleton correlates to volume and shape changing stress exposure

In the preceding study (Part A), we showed that prescribed seeding conditions as well as seeding density can be used to subject multipotent stem cells (MSCs) to volume changing stresses and that changes in volume of the cell are associated with changes in shape, but not volume, of the cell nucleus. In the current study, we aim to control the mechanical milieu of live cells using these prescribed seeding conditions concomitant to delivery of shape changing stresses via fluid flow, while observing adaptation of the cytoskeleton, a major cellular transducer that modulates cell shape, stiffness and remodeling. We hypothesize that the spatiotemporal organization of tubulin and actin elements of the cytoskeleton changes in response to volume and shape changing stresses emulating those during development, prior to the first beating of the heart or twitching of muscle. Our approach was to quantify the change over baseline in spatiotemporal distribution of actin and tubulin in live C3H/10T1/2 model stem cells subjected to volume changing stresses induced by seeding at density as well as low magnitude, short duration, shape changing (shear) stresses induced by fluid flow (0.5 or 1.0 dyne/cm2 for 30/60/90 minutes). Upon exposure to fluid flow, both tubulin thickness (height) and concentration (fluorescence intensity) change significantly over baseline, as a function of proximity to neighboring cells (density) and the substrate (apical-basal height). Given our recently published studies showing amplification of stress gradients (flow velocity) with increasing distance to nearest neighbors and the substrate, i.e. with decreasing density and toward the apical side of the cell, tubulin adaptation appears to depend significantly on the magnitude of the stress to which the cell is exposed locally. In contrast, adaptation of actin to the changing mechanical milieu is more global, exhibiting less significant differences attributable to nearest neighbors or boundaries than differences attributable to magnitude of the stress to which the cell is exposed globally (0.5 versus 1.0 dyne/cm2). Furthermore, changes in the actin cytoskeletal distribution correlate positively with one pre-mesenchymal condensation marker (Msx2) and negatively with early markers of chondrogenesis (ColIIaI alone, indicative of pre-hypertrophic chondrogenesis) and osteogenesis (Runx2). Changes in the tubulin cytoskeletal distribution correlate positively with a marker of pericondensation (Sox9 alone), negatively with chondrogenesis (ColIIaI) and positively with adipogenesis (Ppar-gamma 2). Taken as a whole, exposure of MSCs to volume and shape changing stresses results in emergent anisotropy of cytoskeletal architecture (structure), which relate to emergent cell fate (function).