Survival, growth and tag retention of juvenile European eel (Anguilla anguilla L.) with implanted 12 mm passive integrated transponder tags and acoustic tags

To evaluate the efficiency of tagging juvenile European eels with implanted 12 mm passive integrated transponder (PIT) tags or Eel/Lamprey acoustic transmitters (ELATs), the authors studied tag retention, survival and growth of eels (7-25 g). Experimental eels were obtained from an eel farm, tagged and then released in a series of shallow dug-out ponds with a surface area of c. 200 m² . Tagged and control eels were distributed evenly, with 50 tagged and 50 control eels in each of four ponds, giving a total of 200 tagged and 200 control eels mixed. After 76 days, the ponds were drained, and eels were sampled and measured. A total of 344 eels (86%) were recaptured, indicating high survival. Tag retention was 99% as only one of the recaptured PIT-tagged eels had lost the tag and none of the ELAT tagged. The results demonstrated that tagging juvenile eels >16 cm with these small tags is indeed feasible. The growth of tagged and control fish was differentiated but generally low in length and negative in mass but did not differ between the three groups.

Assessing DNA for fish identifications from reference collections: the good, bad and ugly shed light on formalin fixation and sequencing approaches

Natural history collections are repositories of biodiversity and are potentially used by molecular ecologists for comparative taxonomic, phylogenetic, biogeographic and forensic purposes. Specimens in fish collections are preserved using a combination of methods with many fixed in formalin and then preserved in ethanol for long-term storage. Formalin fixation damages DNA, thereby limiting genetic analyses. In this study, the authors compared the DNA barcoding and identification success for frozen and formalin-fixed tissues obtained from specimens in the CSIRO Australian National Fish Collection. They studied 230 samples from fishes (consisting of >160 fish species). An optimized formalin-fixed, paraffin-embedded DNA extraction method resulted in usable DNA from degraded tissues. Four mini barcoding assays of the mitochondrial DNA (mtDNA) were characterized with Sanger and Illumina amplicon sequencing. In the good quality DNA (without exposure to formalin), up to 88% of the specimens were correctly matched at the species level using the cytochrome oxidase subunit 1 (COI) mini barcodes, whereas up to 58% of the specimens exposed to formalin for less than 8 weeks were correctly identified to species. In contrast, 16S primers provided higher amplification success with formalin-exposed tissues, although the COI gene was more successful for identification. Importantly, the authors found that DNA of a certain size and quality can be amplified and sequenced despite exposure to formalin, and Illumina sequencing provided them with greater power of resolution for taxa identification even when there was little DNA present. Overall, within parameter constraints, this study highlights the possibilities of recovering DNA barcodes for identification from formalin-fixed fish specimens, and the authors provide guidelines for when successful identification could be expected.

A field evaluation of long-term effects of PIT tagging

Passive integrated transponder (PIT)-tagging is commonly used in behavioural studies of fish, although long-term evaluations of effects from tagging under natural conditions are scarce. We PIT-tagged common bream Abramis brama, European perch Perca fluviatilis, pike Esox lucius and roach Rutilus rutilus, released them in their lakes of origin and recaptured them after 103-3269 days. Overall, tagged fish did not differ in condition from non-tagged fish, except for small R. rutilus that had a lower length-specific body mass in one lake in 1 year. We conclude that PIT-tagging in general has negligible long-term effects on fish condition.

Computer-aided photo-identification of a rare stingray, Megatrygon microps

A protocol for photo-identification of individual Megatrygon microps has been defined. One hundred and four identification photographs were taken between 2005 and 2019. Spot patterns on the dorsal surface were used to identify individuals. Unique scarring on eight M. microps re-observed provided an independent confirmation of pattern stability of up to 761 days. Previous studies lacked statistical testing used to validate this photo-identification approach. I³ S photo-matching software was used to successfully match images, identifying 69 individuals. A photo-matching software facilitates an open-source platform for identifying individual M. microps, allowing for better population assessments.

An appraisal of the Maltese national livestock database with regard to bovines

The creation of a centralised national livestock database for the islands of Malta and Gozo is of crucial importance for the identification and traceability of bovines. It is also important for compliance with the legal obligations that followed Malta's accession to the European Union in May 2004. This paper describes how the processes of identification, registration and traceability of bovines have changed since Malta's accession. The validation and integration of data originating from different departmental sections (such as the identification and registration section), the slaughterhouse and the National Veterinary Laboratory, ensures that any discrepancies are highlighted and can be investigated. Events recorded in the database enable the compliance and eligibility of bovine producers to be cross-checked when applications for European Union benefits are made. The main drawbacks and weak points of the system include financial costs for the government department, potentially late notification of the births and deaths of newborn calves, and insufficient uptake among bovine producers of the latest technology for notification of events such as births, deaths and movement of bovines.

[Literature review of the influences on error rates when identifying equids with transponder and hot-iron branding]

Although equids have had to be tagged with a transponder since 2009, breeding associations in Germany disagree as to which method is best suited for identification (with or without hot iron branding). Therefore, the aim of this systematic literature review was to gain an overview of how effective identification is using transponders and hot iron branding and as to which factors influence the success of identification. Existing literature showed that equids can be identified by means of transponders with a probability of 85-100%, whereas symbol brandings could be identified correctly in 78-89%, whole number brandings in 0-87% and single figures in 37-92% of the readings, respectively. The successful reading of microchips can be further optimised by a correctly operated implantation process and thorough training of the applying persons. affect identification with a scanner. The removal of transponders for manipulation purposes is virtually impossible. Influences during the application of branding marks can hardly, if at all, be standardised, but influence the subsequent readability relevantly. Therefore, identification by means of hot branding cannot be considered sufficiently reliable. Impaired quality of identification can be reduced during reading but cannot be counteracted. Based on the existing studies it can be concluded that the transponder method is the best suited of the investigated methods for clearly identifying equids, being forgery-proof and permanent. It is not to be expected that applying hot branding in addition to microchips would optimise the probability of identification relevantly.

Rapid temperature-dependent wound closure following adipose fin clipping of Atlantic salmon Salmo salar L

Three groups of Atlantic salmon were kept at a constant temperature of 4, 10 and 14 °C. The adipose fins were removed; six fish/group were sampled at 11 subsequent time points post-clipping. Samples were prepared for histopathological examination to study the course of re-epithelization. A score sheet was developed to assess the regeneration of epidermal and dermal cell types. Wounds were covered by a thin epidermal layer between 4 and 6 h post-clipping at 10 and 14 °C. In contrast, wound closure was completed between 6 and 12 h in fish held at a constant temperature of 4 °C. By 18 h post-clipping, superficial cells, cuboidal cells, prismatic basal cells and mucous cells were discernible in all temperature groups, rapidly progressing towards normal epidermal structure and thickness. Within the observation period, only minor regeneration was found in the dermal layers. A positive correlation between water temperature and healing rates was established for the epidermis. The rapid wound closure rate, epidermal normalization and the absence of inflammatory reaction signs suggest that adipose fin clipping under anaesthesia constitutes a minimally invasive method that may be used to mark large numbers of salmon presmolts without compromising fish welfare.

[Comparison of susceptibility artifacts generated by microchips with different geometry at 1.5 Tesla magnet resonance imaging. A phantom pilot study referring to the ASTM standard test method F2119-07]

OBJECTIVE

Ferromagnetic material in microchips, used for animal identification, causes local signal increase, signal void or distortion (susceptibility artifact) on MR images. To measure the impact of microchip geometry on the artifact's size, an MRI phantom study was performed.

MATERIAL AND METHODS

Microchips of the labels Datamars®, Euro-I.D.® and Planet-ID® (n  =  15) were placed consecutively in a phantom and examined with respect to the ASTM Standard Test Method F2119-07 using spin echo (TR 500 ms, TE 20 ms), gradient echo (TR 300 ms, TE 15 ms, flip angel 30°) and otherwise constant imaging parameters (slice thickness 3 mm, field of view 250 x 250 mm, acquisition matrix 256 x 256 pixel, bandwidth 32 kHz) at 1.5 Tesla. Image acquisition was undertaken with a microchip positioned in the x- and z-direction and in each case with a phase-encoding direction in the y- and z-direction. The artifact size was determined with a) a measurement according to the test method F2119-07 using a homogeneous point operation, b) signal intensity measurement according to Matsuura et al. and c) pixel counts in the artifact according to Port and Pomper.

RESULTS

There was a significant difference in artifact size between the three microchips tested (Wilcoxon p = 0.032). A two- to three-fold increase in microchip volume generated an up to 76% larger artifact, depending on the sequence type, phase-encoding direction and chip position to B0.

CONCLUSION AND CLINICAL RELEVANCE

The smaller the microchip geometry, the less is the susceptibility artifact. Spin echoes (SE) generated smaller artifacts than gradient echoes (GE). In relation to the spatial measurement of the artifact, the switch in phase-encoding direction had less influence on the artifact size in GE- than in SE-sequences. However, the artifact shape and direction of SE-sequences can be changed by altering the phase. The artifact size, caused by the microchip, plays a major clinical role in the evaluation of MRI from the head, shoulder and neck regions.

Surgical wound healing in radio-tagged adult Pacific lamprey Entosphenus tridentatus held on different substrata

Radio-tagged adult Pacific lamprey Entosphenus tridentatus held in a raceway with Plexiglas-lined walls and bottom healed more slowly and retained sutures longer than fish held in an all-concrete raceway or one with Plexiglas walls and a cobble-lined bottom. On all substrata, healing depended on when sutures were lost, and fish that lost their sutures in <14 days post-surgery healed faster than those that kept sutures longer. Long-term suture retention led to tissue trauma, infection and poor survival.

Data quality of the Cattle Tracing System in Great Britain

The Cattle Tracing System (cts) of Great Britain was examined to investigate the quality of its data in terms of known errors and omissions, and their distribution. The proportions of erroneous or missing data have decreased steadily over time, with a marked improvement in the quality of the data since 2001, when recording became mandatory. There is little variation between regions in the quality of the data, but there are potentially important variations between the types of agricultural premises that cattle move to and from, and in other factors correlated with the type of premises, such as the age of the animals and the number of animal movements associated with the premises.

[Proposals for designing the food chain information for the implementation of the risk-oriented ante- and post-mortem meat inspection]

The recent crises in the meat industry due to meat-associated risks such as salmonella, nitrofen and dioxin prove that the traditional ante- and post mortem inspection of slaughter animals and carcasses is not any longer able to recognise and prevent the risks of today. Therefore, the EU Commission has issued Reg. (EC) 853/2004 and Reg. (EC) 854/2004 that regulate the transition of the traditional meat inspection, which demands inspecting each individual carcass in the same way, to a risk-based meat inspection, which is using relevant pieces of information about the previous production stages for making risk-based decisions on the intensity of the inspection of slaughter pig batches. The new EU legislation is not any longer prescribing exactly the inspection procedure, but defines the food safety goals. The consequence is that there are still various ideas and opinions on how to implement a reasonable risk-based meat inspection, and, in particular, on how to design the "relevant food chain information". The present paper is describing the legal framework and the objectives of the risk-based meat inspection, and proposals for designing the food chain information for the implementation of the risk-based ante- and post-mortem meat inspection are made and discussed.

Review of identification and traceability legislation for pigs in Australia

OBJECTIVE

To assess Australia's capability to trace pig movements in the event of an exotic disease outbreak by highlighting the commonalities and inconsistencies between the various state and territory legislations in defining how pig producers are located; their pigs are identified; and whether movement records are required post-farm gate.

PROCEDURE

A review of the identification and traceability legislation applicable to pigs in Australia was undertaken over a 6 month period. The appropriate legislative Acts and Regulations were downloaded from the Australasian Legal Information Institute internet site (http://www.austlii.edu.au/) and reviewed.

RESULTS

The Australian pig industry currently uses the branding method (tattooing) to identify pigs for sale or slaughter, with each state responsible for its own pig identification and movement control systems. Areas of concern identified included inconsistencies with the minimum weight or age of pigs that require identification; discrepancies between methods of tattoo registration and shortfalls in documentation for recording pig movements.

CONCLUSION

Our findings highlight the flaws in Australia's current state legislative Acts and Regulations for identifying pigs and tracking their movements, which compromise the ability of jurisdictions to meet the endorsed National Performance Standards. Improvements in these areas will enhance security to the pig and other livestock industries in the event of future exotic disease outbreaks.

Veterinary accreditation and some new imperatives for national preparedness

IN the first of a 5-part series of articles examining the role of the veterinary profession in national preparedness, the authors examine the skills, knowledge, and aptitudes expected of accredited veterinarians and discuss additional skills and knowledge likely to be expected in the future.

An overview of microbial food safety programs in beef, pork, and poultry from farm to processing in Canada

Canada's vision for the agri-food industry in the 21st century is the establishment of a national food safety system employing hazard analysis and critical control point (HACCP) principles and microbiological verification tools, with traceability throughout the gate-to-plate continuum. Voluntary on-farm food safety (OFFS) programs, based in part on HACCP principles, provide producers with guidelines for good production practices focused on general hygiene and biosecurity. OFFS programs in beef cattle, swine, and poultry are currently being evaluated through a national recognition program of the Canadian Food Inspection Agency. Mandatory HACCP programs in federal meat facilities include microbial testing for generic Escherichia coli to verify effectiveness of the processor's dressing procedure, specific testing of ground meat for E. coli O157:H7, with zero tolerance for this organism in the tested lot, and Salmonella testing of raw products. Health Canada's policy on Listeria monocytogenes divides ready-to-eat products into three risk categories, with products previously implicated as the source of an outbreak receiving the highest priority for inspection and compliance. A national mandatory identification program to track livestock from the herd of origin to carcass inspection has been established. Can-Trace, a data standard for all food commodities, has been designed to facilitate tracking foods from the point of origin to the consumer. Although much work has already been done, a coherent national food safety strategy and concerted efforts by all stakeholders are needed to realize this vision. Cooperation of many government agencies with shared responsibility for food safety and public health will be essential.

Evaluation of retinal images for identifying individual dogs

OBJECTIVE

To F whether vessels in the ocular fundus changed over the lifetime of Beagles and whether any changes were substantial enough to likely preclude positive identification of individual dogs by use of their retinal vascular patterns.

ANIMALS

18 Beagles.

PROCEDURES

Fundic photographs of both eyes of 18 Beagles taken at 1 or 3, 5, and 7 or 9 years of age were digitalized. Photographs were analyzed by use of 2 software programs. One was used to determine vessel numbers and widths and the other to determine the locations of the 3 largest vessels. Measurements were compared over time periods in the life of each dog. Only observations made at baseline (1 or 3 years of age) and again at 5 and 9 years of age were included in the statistical analysis, as these points were common to all dogs.

RESULTS

No significant changes in numbers or locations of the blood vessels were detected over time. Widths of the vessels decreased significantly as the dogs aged.

CONCLUSIONS AND CLINICAL RELEVANCE

The ocular fundus of Beagles changed over each dog's lifetime in that the retinal blood vessels became smaller but did not change in number or location. Results suggest that digitalized retinal images can likely be used to identify dogs over their lifetimes.

Assessment of the management practices facilitating the establishment and spread of exotic diseases of pigs in the Sydney region

OBJECTIVE

To assess management factors that would influence the establishment and spread of exotic diseases in pigs in the Sydney region.

DESIGN

Saleyard and pig producer practices that could assist the initiation and subsequent spread of exotic diseases in pigs were surveyed and assessed over a 12 month period.

PROCEDURE

Two saleyards in the Sydney region selling pigs were attended weekly for 12 months (2002-2003) to collect details on vendors and purchasers of pigs. Pig producer locations were mapped. All pig farmers on the Department of Primary Industries temporary brand register were surveyed to record management practices and knowledge of exotic diseases. Swine brands were inspected to determine their quality as a tracing mechanism.

RESULTS

There were 101 pig sale days during the survey period with 13,869 pigs sold. There were 305 vendors, of whom 95% were identifiable through saleyard records. However, only 40% of the 377 purchasers were identifiable. More than one third of the 1749 transactions were for cash without the identity of the purchaser being recorded at the saleyards. Some 3% of pigs failed to sell and were returned to the property of origin. A total of 64 of 132 pig producers in the Sydney region were surveyed and 52 responded with survey information. The production systems of pig producers were predominately intensive or semi-intensive (88%) with 69% of these operators being small hobby producers. Pigs were mostly fed household and commercial scraps that were free of meat scraps, however, 2 producers were found to be feeding meat scraps (swill) illegally. Some 56% of producers surveyed did not have a tattoo swine brand and of the 23 producers with registered brands, 3 were not available for inspection or were not functional and 2 used the brand irregularly.

CONCLUSION

This survey has identified factors that would assist the establishment and spread of vesicular and other exotic diseases in pigs. The factors included feeding meat scraps (swill), poor farmer knowledge of exotic diseases, ineffective pig owner identification at saleyards, the practice of cash sales that precluded the collection of purchaser details, and inadequate identification of pigs. Tracing the movements of pigs under these circumstances would be difficult.

Retention of different sizes of electronic identification boluses in the forestomachs of sheep1,2

Twelve types of electronic identification ruminal boluses of different dimensions were used to obtain a model for predicting their retention in the forestomachs of sheep. Boluses (n = 1,662) were made of ceramic materials, and their dimensions varied in o.d. (9 to 21 mm), length (37 to 68 mm), volume (2.5 to 21.0 mL), and specific gravity (0.85 to 3.91). Each bolus contained a half-duplex, standardized, glass-encapsulated transponder (32 x 3.8 mm). Boluses were administered to sheep (n = 1,497) of different ages by using the appropriate balling guns, and their retention under semiintensive conditions was recorded for at least 2 yr. When a bolus was lost, the sheep was rebolused with a heavier bolus. All sheep wore 2 plastic ear tags: one for the official control of health programs and the other for farm use. To determine the anatomical limit for a bolus passing through the gastrointestinal tract, the size of the reticulo-omasal orifice was measured in 46 adult sheep (male, n = 14; female, n = 32) that died by causes not related to bolus administration during the experiment. No signs of disease or growth alteration were detected in the bolused sheep. Total ear tag losses during the experiment period were 7.5% on average. Bolus retention (5 to 100%) varied according to bolus features and age of the sheep, but it showed a plateau after 18 mo. Inadequately dimensioned boluses were regurgitated or passed through the gastrointestinal tract and were excreted with the feces. The diameter of the reticulo-omasal orifice in adult sheep differed between male and female (23.1 and 21.8 mm, respectively; P < 0.01) and was greater than the o.d. of the retained boluses. Retention rate was predicted from bolus weight and volume by a logistic regression (R2 = 0.997; P < 0.001). When retention data from the literature (59.0 to 100%) were included in the model, the adjustment was slightly lower (R2 = 0.967). As a result, the minimum bolus weight estimated to reach a 99.5% retention rate in sheep varied between 16 and 45 g when volume varied between 3 and 22 mL, for boluses with a specific gravity between 2.0 and 5.2. In conclusion, bolus retention rate in sheep varied dramatically according to their features. For safe and efficient retention of electronic identification boluses in sheep, boluses of small volume and diameter (e.g., < 15 mm) with specific gravity and weight greater than 3.0 and 20 g, respectively, are recommended.

Ways to improve the biosecurity of bovine semen

Semen production and trade is a worldwide industry. A framework, based on international standards is awaiting international and national regulation. In the perspective of biosecurity of the final product, critical notes can be made according to the semen production regulation and product safety. Process description brings the obligatory health standards for the production bulls, collection and processing of semen, identification, registration, worldwide distribution and insemination into discussion. Test frequency, test quality and demands, way of sampling and test consistency can influence product safety. New scientific knowledge can influence the value of the regulation. Whether a country is free of notifiable disease should influence decisions regarding necessary tests for the production bulls. The biosecurity of the semen production process is influenced by several factors. The effectiveness of the antibiotics used is questionable. The extenders for cryopreservation added to the semen can affect product safety. The way materials and storage containers have to be disinfected must be clear. In modern industry, tracking and tracing is an important issue. Worldwide differences in ways of identification of straws do not benefit a proper identification and registration throughout the process. Regulation could help improve the transparency of production and trade. Before anything concerning biohazard is implemented in regulation, each rule should be thoroughly based on scientific research where possible and furthermore it must be possible to enforce the regulation. The effort it takes to enforce the regulation should be in balance with the benefit it provides. An approach to alter regulation quickly is advisable. To produce a safe product that is accepted for international trade is of vital interest for the survival of artificial insemination (AI) in cattle.

The implementation of traceability systems

Traceability is a tool to help countries meet their objectives of controlling, preventing and eradicating animal diseases. This article sets out the required steps in a traceability system. Before designing a system of traceability, one must identify the different characteristics that need to be traced throughout the various steps in the food production chain. The interaction between different sectors in defining the objectives and the resulting needs of a traceability system is fundamental. A clear legal framework is also indispensable. European Union (EU) legislation requires identification and registration for cattle, pigs, sheep and goats. For intra-EU trade these animals must be accompanied by a health certificate providing information on their identity and health status. The required identification is harmonised on an EU-wide basis with the aim of ensuring traceability for veterinary purposes. Furthermore EU legislation requires that the traceability of food, feed and food-producing animals be established at all stages of production.

Estimation of the number of genetic markers required for individual animal identification accounting for genotyping errors

Nearly all studies that consider the power of exclusion for individual identification using genetic markers ignore the possibility of erroneous genotypes, although individual genotype error rates are approximately 1% for microsatellites. Single nucleotide polymorphisms (SNPs) have lower error rates, but because of their lower information content, more SNPs than microsatellites will be required to obtain the same power of exclusion for traceability. In this study, we accounted for genotyping mistakes by requiring at least two discrepancies to reject a match. Exclusion probabilities were computed analytically and by simulation. A microsatellite with five alleles was approximately comparable in exclusion power to 2-2.25 SNPs. At least eight SNPs were required to achieve a 99% probability of rejection for a match between two individuals, while with 25 SNPs there was a <1% chance for a match between any of five million individuals.

Use of ear tags and injectable transponders for the identification and traceability of pigs from birth to the end of the slaughter line1,2

A total of 557 newborn piglets were used to compare eight identification devices, including one plastic ear tag as a control (C, n = 348) and two types of electronic ear tags (E1, n = 106; and E2, n = 103), and five types of injectable transponders (n = 557): small 12-mm (D12, n = 116; and S12, n = 110), medium 23-mm (T23, n = 108), and large (32-mm, T32, n = 115; and 34-mm, S34, n = 108). Injections were made s.c. in the auricle base (n = 248) and intraperitoneally (n = 309) using a new technique. All piglets were identified with two devices, but using electronic ear tags in conjunction with injection in the auricle was avoided on the same pig. Readability of devices was checked during fattening (until 110 kg BW) and slaughtering. On-farm losses were lower for control than for electronic ear tags (C = 1.1%; E1 = 8.8%; and E2 = 44.9%; P < 0.01); the latter also suffered electronic failures (E1 = 5.5%; and E2 = 55.1%; P < 0.001). On-farm losses of transponders injected in the auricle base were greater in large (S34 = 72.5%; and T32 = 46.3%; P < 0.05) than in small transponders (S12 = 19.4%; and D12 = 17.1%), but T23 (29.8%) only differed from S34. Transponder size did not affect on-farm losses for intraperitoneal injections in which only one loss was recorded (0.4%). All ear tags had similar losses during transportation to the slaughterhouse (1.2%), but no losses were observed in injectables. Slaughtering losses did not differ between ear tags (C = 11.2%; and E1 = 6.4%), but apart from losses, 12.8% of E1 failed electronically. Injection site affected losses and breakages during slaughtering (auricle base = 6.4%; and intraperitoneal = 0%), but recovery time did not significantly differ (auricle base = 28.6 s; and intraperitoneal = 18.9 s). Transponders in the auricle base were recovered by sight (30.2%), palpation (27.4%), or by cutting (42.5%). Intraperitoneal transponders were mainly recovered loose in the abdominal cavity (81.4%), whereas 18.6% fell on the floor. As a result, traceability varied significantly (P < 0.05) between control (86.7%) and electronic ear tags (0 to 68.1%) and injectable transponders, with the auricle base (17.8 to 75.0%) having lower values than intraperitoneal (98 to 100%). Intraperitoneal injection was a very effective tool for piglet identification and traceability, ensuring the transfer of information from farm to slaughterhouse. To warrant the use of this technique in practice, transponder recovery requires further investigation.

Use of bovine single nucleotide polymorphism markers to verify sample tracking in beef processing

OBJECTIVE

To determine whether a selected set of 20 single nucleotide polymorphism (SNP) markers derived from beef cattle populations can be used to verify sample tracking in a commercial slaughter facility that processes primarily market (ie, culled) dairy cows.

DESIGN

Prospective, blinded validation study.

ANIMALS

165 cows and 3 bulls from 18 states (82% Holstein, 8% other dairy breeds, and 10% beef breeds).

PROCEDURE

Blood was collected by venipuncture from randomly chosen animals just prior to slaughter. The purported corresponding liver samples were collected during beef processing, and genotype profiles were obtained for each sample.

RESULTS

On the basis of SNP allele frequencies in these cattle, the mean probability that 2 randomly selected individuals would possess identical genotypes at all 20 loci was 4.3 x 10(-8). Thus, the chance of a coincidental genotype match between 2 animals was 1 in 23 million. Genotype profiles confirmed appropriate matching for 152 of the 168 (90.5%) purported blood-liver sample pairs and revealed mismatching for 16 (9.5%) pairs. For the 16 mismatched sample pairs, 33% to 76% of the 20 SNP genotypes did not match (mean, 52%). Discordance that could be attributed to genotyping error was estimated to be < 1% on the basis of results for split samples.

CONCLUSIONS AND CLINICAL RELEVANCE

Results suggest that this selected set of 20 bovine SNP markers is sufficiently informative to verify accuracy of sample tracking in slaughter plants that process beef or dairy cattle. These or similar SNP markers may facilitate high-throughput, DNA-based, traceback programs designed to detect drug residues in tissues, control of animal diseases, and enhance food safety.

Effects of sire misidentification on estimates of genetic parameters for birth and weaning weights in Hereford cattle

Birth weights (4,155) and weaning weights (3,884) of Line 1 Herefords collected at the Fort Keogh Livestock and Range Research Laboratory in Miles City, MT, between the years of 1935 to 1989 were available. To study the effect of misidentification on estimates of genetic parameters, the sire identification of calf was randomly replaced by the identification of another sire based on the fraction of progeny each sire contributed to a yearly calf crop. Misidentification rates ranged from 5 to 50% with increments of 5%. For each rate of misidentification, 100 replicates were obtained and analyzed with single-trait and two-trait analyses with a restricted maximum likelihood (REML) algorithm. Two different models were used. Both models contained year x sex combinations and ages of dam as fixed effects, calendar birth date as a fixed covariate, and random animal and maternal genetic effects and maternal permanent environment effects. Model 2 also included sire x year combinations as random effects. As the rate of misidentification increased, estimates of the direct-maternal genetic correlation increased for both traits, with both models, for all analyses. With singletrait analyses, estimates of the fraction of variance that were due to sire x year interaction effects increased slightly for birth weight (near zero) and decreased slightly (0.015 to 0.004) for weaning weight as misidentification increased. With two-trait analyses, estimates of fraction of variance that were due to sire x year effects gradually decreased for weaning weight as misidentification increased. With the two-trait analyses, and with both models, as the level of sire misidentification increased, estimates of the genetic correlation between direct effects gradually increased, and estimates of the correlation between maternal effects gradually decreased. Estimates of the direct-maternal genetic correlation were more positive with Model 2 than with Model 1 for all levels of misidentification. Results of this study indicate that misidentification of sires would severely bias estimates of genetic parameters and would reduce genetic gain from selection.

International regulation of wildlife trade: relevant legislation and organisations

Trade in wildlife brings into play a variety of legislation from several distinct areas of law. Many species of wildlife are subject to restrictions on international movement with the aim of protecting wild populations from over-exploitation. Animal health legislation is strictly applied to the movement of most animals to prevent the spread of infectious diseases between importing and exporting counties. The welfare of animals in the course of trade requires consideration and relevant legislation has been put into place, particularly in respect of transportation. A number of institutions have an impact on the trade itself or on the legislation that regulates wildlife trade on an international basis.