Illuminating the dark side of indoor oxidants

The chemistry of oxidants and their precursors (oxidants*) plays a central role in outdoor environments but its importance in indoor air remains poorly understood. Ozone (O3) chemistry is important in some indoor environments and, until recently, ozone was thought to be the dominant oxidant indoors. There is now evidence that formation of the hydroxyl radical by photolysis of nitrous acid (HONO) and formaldehyde (HCHO) may be important indoors. In the past few years, high time-resolution measurements of oxidants* indoors have become more common and the importance of event-based release of oxidants* during activities such as cleaning has been proposed. Here we review the current understanding of oxidants* indoors, including drivers of the formation and loss of oxidants*, levels of oxidants* in indoor environments, and important directions for future research.

Effect of catalyst calcination temperature in the visible light photocatalytic oxidation of gaseous formaldehyde by multi-element doped titanium dioxide

The present study investigates the influence of calcination temperature on the properties and photoactivity of multi-element doped TiO₂. The photocatalysts were prepared by incorporating silver (Ag), fluorine (F), nitrogen (N), and tungsten (W) into the TiO₂ structure via the sol-gel method. Spectroscopic techniques were used to elucidate the correlation between the structural and optical properties of the doped photocatalyst and its photoactivity. XRD results showed that the mean crystallite size increased for undoped photocatalysts and decreased for the doped photocatalysts when calcination was done at higher temperatures. UV-Vis spectra showed that the absorption cut-off wavelength shifted towards the visible light region for the as-synthesized photocatalysts and band gap narrowing was attributed to multi-element doping and calcination. FTIR spectra results showed the shifting of OH-bending absorption bands towards increasing wave numbers. The activity of the photocatalysts was evaluated in terms of gaseous formaldehyde removal under visible light irradiation. The highest photocatalytic removal of gaseous formaldehyde was found at 88%. The study confirms the effectiveness of multi-element doped TiO₂ to remove gaseous formaldehyde in air by visible light photocatalysis and the results have a lot of potential to extend the application to other organic air contaminants.

Portable photocatalytic air cleaners: efficiencies and by-product generation

Portable photocatalytic air cleaners were investigated in 24 and 48 m(3) emission test chambers with regard to efficiency and by-product generation. For this purpose, formaldehyde, decane, 1,2-dichlorobenzene, toluene, α-pinene and heptanal were doped at sub-ppm concentration levels into the chambers individually and in mixtures. By way of specified test protocols, efficiencies could be distinguished but were strongly dependant on the choice of test compounds, especially on whether single or multi compound dosing was used, and on long-term effects. Initial clean air delivery rates (CADRs) up to 137 m(3)/h were measured. Typical by-products were found in significant concentrations. The main ones were formaldehyde up to 50 ppb (62 μg/m(3)) and acetone up to 80 ppb (190 μg/m(3)). Other aldehydes were also found, but at smaller levels. The detection of chloroacetone, a strong irritating compound, at concentrations up to 15 ppb (57 μg/m(3)) strengthens the importance of such investigations especially in cases were chloro-organic compounds are involved.

TiO₂ sol-gel for formaldehyde photodegradation using polymeric support: photocatalysis efficiency versus material stability

Photocatalysts supported on polymers are not frequently used in heterogeneous photocatalysis because of problems such as wettability and stability that affect photocatalysis conditions. In this work, we used polypropylene as support for TiO2 sol-gel to evaluate its stability and efficiency under UV radiation. We also tested the effect of the thermo-pressing PP/TiO2 system on the photocatalytic efficiency and stability under UV radiation. The films were characterized by scanning electron microscopy (SEM), UV-Vis spectroscopy and X-ray diffraction (XRD). The SEM micrographs showed that the films of TiO2 sol-gel onto PP has approximately 1.0-μm thick and regular surface and the generation of polypropylene nanowires on hot-pressed samples. XRD showed the formation of TiO2 anatase on the surface of the films made by dip-coating. All photocatalysts were tested in decontaminating air-containing gaseous formaldehyde (70 ppmv) presenting degradation of the target compound to the limit of detection. The photocatalysts showed no deactivation during the entire period tested (30 h), and its reuse after washing showed better photocatalytic performance than on first use. The photocatalyst showed the best results were tested for 360 h with no observed deactivation. Aging studies showed that the film of TiO2 causes different effects on the photostability of composites, with stabilizing effect when exposed to most energetic UVC radiation (λmax = 254 nm) and degradative effects when exposed to UVA radiation (λmax = 365 nm).

Adsorption and photocatalytic oxidation of formaldehyde on a clay-TiO2 composite

We investigated the adsorption capacity and photocatalytic removal efficiency of formaldehyde using a hectorite-TiO(2) composite in a bench flow reactor. The same experimental conditions were applied to pure TiO(2) (Degussa P25) as a reference. The catalysts were irradiated with either a UVA lamp (365 nm) or with one of two UVC lamps of 254 nm and 254+185 nm, respectively. Formaldehyde was introduced upstream at concentrations of 100-500 ppb, with relative humidity (RH) in the range 0-66% and residence times between 50 and 500 ms. Under dry air and without illumination, saturation of catalyst surfaces was achieved after ≈ 200 min for P25 and ≈ 1000 min for hectorite-TiO(2). The formaldehyde uptake capacity by hectorite-TiO(2) was 4.1 times higher than that of P25, almost twice the BET surface area ratio. In the presence of humidity, the difference in uptake efficiency between both materials disappeared, and saturation was achieved faster (after ≈ 200 min at 10% RH and ≈ 60 min at 65% RH). Under irradiation with each of the three UV sources, removal efficiencies were proportional to the Ti content and increased with contact time. The removal efficiency decreased at high RH. A more complete elimination of formaldehyde was observed with the 254+185 nm UV source.

A methodology for modeling photocatalytic reactors for indoor pollution control using previously estimated kinetic parameters

A methodology for modeling photocatalytic reactors for their application in indoor air pollution control is carried out. The methodology implies, firstly, the determination of intrinsic reaction kinetics for the removal of formaldehyde. This is achieved by means of a simple geometry, continuous reactor operating under kinetic control regime and steady state. The kinetic parameters were estimated from experimental data by means of a nonlinear optimization algorithm. The second step was the application of the obtained kinetic parameters to a very different photoreactor configuration. In this case, the reactor is a corrugated wall type using nanosize TiO(2) as catalyst irradiated by UV lamps that provided a spatially uniform radiation field. The radiative transfer within the reactor was modeled through a superficial emission model for the lamps, the ray tracing method and the computation of view factors. The velocity and concentration fields were evaluated by means of a commercial CFD tool (Fluent 12) where the radiation model was introduced externally. The results of the model were compared experimentally in a corrugated wall, bench scale reactor constructed in the laboratory. The overall pollutant conversion showed good agreement between model predictions and experiments, with a root mean square error less than 4%.

An efficient deprotection of oximes to carbonyls catalyzed by silica sulfuric acid in water under ultrasound irradiation

Deprotection of oximes to the corresponding carbonyl compounds in silica sulfuric acid/surfactant/paraformaldehyde system can be carried out in excellent yields at 50 degrees C in water under ultrasound irradiation.

Photodegradation kinetics of formaldehyde using light sources of UVA, UVC and UVLED in the presence of composed silver titanium oxide photocatalyst

This study investigated the surface modification of photocatalyst and photodecomposition of formaldehyde from indoor pollution source. This study explored the feasibility of the application of the ultraviolet light emitting diode (UVLED) instead of the traditional ultraviolet (UV) lamp to treat the formaldehyde. The photocatalytic decomposition of formaldehyde at various initial concentrations was elucidated according to the Langmuir-Hinshelwood model. The reaction rate constant (k) and adsorption equilibrium constant (K(L)) over 0.334 g silver titanium oxide photocatalyst (Ag/TiO2) coated on glass sticks with 254 nm ultraviolet lamp (UVC), 365 nm ultraviolet lamp (UVA), and UVLED are 650 ppmv min(-1) and 2 x 10(-4)ppmv(-1), 500 ppmv min(-1) and 1.04 x 10(-4)ppmv(-1), and 600 ppmv min(-1) and 2.52 x 10(-5)ppmv(-1), respectively. A comparison of the simulation results with the experimental data was also made, indicating good agreement. The magnitudes of energy effectiveness (E(e)) are in the order of UVLED (0.6942 mg kW(-1)h(-1))>UVA (0.007 mg kW(-1)h(-1))>UVC (0.0053 mg kW(-1)h(-1)). The E(e) of UVLED is 131 times larger than that of UVC. The UVLED can save a lot of energy in comparison with the traditional UV lamps. Thus, this study showed the feasible and potential use of UVLED in photocatalysis.

Effects of peptizing conditions on nanometer properties and photocatalytic activity of TiO2 hydrosols prepared by H2TiO3

TiO2 hydrosols were prepared from metatitanic acid (H2TiO3) by chemical precipitation-peptization method under various peptizing conditions. The effects of peptizing conditions on nanosized properties and photocatalytic activity of TiO2 hydrosols were investigated. The crystal structure, crystallinity, particle size distribution, and transparency (T%) of as-obtained hydrosols were characterized by means of X-ray diffraction, transmission electron microscopy, light-scattering size analyzer, and UV-vis transmittance spectra. The results showed that the properties of hydrosols depended on peptizing conditions including a molar ratio of H+/Ti, temperature, and solid content. The photoactivity of TiO2 hydrosols was evaluated in terms of the degradation of rhodamine B (RhB) in aqueous solution, and formaldehyde (HCHO) and methyl mercaptan (CH3SH) in gaseous phase. The results showed that increase in H+/Ti ranging 0.19-0.75 led to the decrease in particle size and the increase in transparency. With increasing of temperature, particle sizes increased while the transparency and photoactivity decreased steadily when the temperature was higher than 65 degrees C. The particle size, transparency and photoactivity of the hydrosols hardly depended on solid content when it was not less than 2%. It should be confirmed that the hydrosols with higher crystallinity, smaller particle size and higher transparency could have the higher photoactivity for the degradation of RhB, CH3SH, and HCHO. In this study, the optimal peptizing conditions were determined to be H+/Ti=0.75, temperature=65 degrees C and solid content=2-6%.

Photoinduced Surface Dynamics of CO Adsorbed on a Platinum Electrode

The surface dynamics of adsorbed CO molecules formed by dissociative adsorption of HCHO at a polycrystalline Pt electrode/electrolyte solution interface was studied by picosecond time-resolved sum-frequency generation (TR-SFG) spectroscopy. A SFG peak at 2050-2060 cm(-1) was observed at the Pt electrode in HClO(4) solution containing HCHO at 0-300 mV (vs Ag/AgCl), indicating the formation of adsorbed CO at an atop site of the Pt surface as a result of dissociative adsorption of HCHO. The peak position varied with potential by approximately 33 cm(-1)/V, as previously found in an infrared reflection absorption spectroscopy (IRAS) study. Irradiation of an intense picosecond visible pulse (25 ps, 532 nm) caused an instant intensity decrease and broadening of the CO peak accompanied by the emergence of a new broad peak at approximately 1980 cm(-1) within the time resolution of the system. These results suggest a decrease and increase in the populations of CO adsorbed on atop and bridge sites, respectively, upon visible pump pulse irradiation.

Effectiveness of photocatalytic filter for removing volatile organic compounds in the heating, ventilation, and air conditioning system

Nowadays, the heating, ventilation, and air conditioning (HVAC) system has been an important facility for maintaining indoor air quality. However, the primary function of typical HVAC systems is to control the temperature and humidity of the supply air. Most indoor air pollutants, such as volatile organic compounds (VOCs), cannot be removed by typical HVAC systems. Thus, some air handling units for removing VOCs should be added in typical HVAC systems. Among all of the air cleaning techniques used to remove indoor VOCs, photocatalytic oxidation is an attractive alternative technique for indoor air purification and deodorization. The objective of this research is to investigate the VOC removal efficiency of the photocatalytic filter in a HVAC system. Toluene and formaldehyde were chosen as the target pollutants. The experiments were conducted in a stainless steel chamber equipped with a simplified HVAC system. A mechanical filter coated with Degussa P25 titania photocatalyst and two commercial photocatalytic filters were used as the photocatalytic filters in this simplified HVAC system. The total air change rates were controlled at 0.5, 0.75, 1, 1.25, and 1.5 hr(-1), and the relative humidity (RH) was controlled at 30%, 50%, and 70%. The ultraviolet lamp used was a 4-W, ultraviolet-C (central wavelength at 254 nm) strip light bulb. The first-order decay constant of toluene and formaldehyde found in this study ranged from 0.381 to 1.01 hr(-1) under different total air change rates, from 0.34 to 0.433 hr(-1) under different RH, and from 0.381 to 0.433 hr(-1) for different photocatalytic filters.

Photocatalytic degradation of formaldehyde containing wastewater from veterinarian laboratories

The photocatalytic destruction of methanol, formaline (mixture of formaldehyde, methanol and water) and formaline wastes from the preservation of vertinarian physiologic samples has been attempted by two different processes, at high concentrations of reagents and by dossification of reagents, varying pH in both. Experiment evolution has been monitored by measuring the organic matter such as TOC and formaldehyde concentrations [H2CO]. Also, methanol and methanol-formaldehyde interactions with the TiO2 surface have been analysed by FTIR spectroscopy. Results indicate that at high concentrations the catalyst surfacial alterations given by methoxy, formates or carbonates, according to the pH of the sample can profoundly affect catalyst behaviour. It has been established that reagent dossification is advantageous for enhancing photonic efficiency as it minimizes the adsorbate presence that hampers the photocatalytic process.

Removal of indoor pollutants under UV irradiation by a composite TiO2-zeolite sheet prepared using a papermaking technique

Toluene and formaldehyde are malodorous and cause indoor pollution. These materials have received much attention as hazardous and malodorous substances. It is well known that long-term exposure to even fairly low levels of toluene and formaldehyde brings about the risk of asthma and eczema. In this study, a composite TiO2-zeolite (ZE) sheet prepared using a papermaking technique was applied to remove toluene and formaldehyde under UV irradiation. The optimum composition of the TiO2 (Ti)-ZE sheet was studied in detail with regard to the effective removal of various indoor pollutants. Gaseous toluene and formaldehyde were removed by a composite TiO2-ZE sheet with different efficiencies depending upon the ratio of Ti/ZE in the composite sheet. The composite sheets could decompose formaldehyde and toluene repeatedly after being recharged. It was shown that the sheets are potentially applicable as highly functional materials to be placed on walls and ceilings of houses for the removal of various indoor pollutants.

Comparison of temporal changes in components of formalin guaiacol under several storage conditions

This study examined the effects of storage conditions such as time course, temperature, fluorescent light, and darkness on the components and antibacterial activity of formalin guaiacol (FG) used in endodontic treatment. We measured the quantities of formaldehyde and guaiacol in FG and antibacterial activities against Staphylococcus aureus, Porphyromonas gingivalis, and Porphyromonas endodontalis. The components and antibacterial activity of FG in the brown or transparent tightly sealed containers were not affected by temperature or fluorescent light throughout the 4 week test. However, in the loosely sealed containers, formaldehyde and guaiacol in FG sample decreased remarkably within one week, not only in a temperature- and time-dependent manner, but also under fluorescent light at 20 degrees C. Furthermore, the antibacterial activities in the FG sample were significantly attenuated in parallel with the decrease in formaldehyde levels. Fluorescent light caused color changes and crystallization of FG samples in the transparent containers. These results suggest that it is important to replace fresh FG every 5 to 7 days for endodontic treatment and that, in the dental office, it is advisable to store fresh FG in tightly sealed containers every 2 weeks to maintain its efficacy.

Microwaves and heat in aldehyde fixation: model experiments with bovine serum albumin

Most model experiments concerning tissue fixation have used low concentrations of fixatives and proteins. Here, high concentrations (up to 32%) of bovine serum albumin (BSA) were reacted with formaldehyde (1-20%) and glutaraldehyde (0.5-4%). Gels were formed between 16% BSA and 10-20% formaldehyde at room temperature, but not with percentages of formaldehyde lower than 4%. Microwave application or heating in a water bath to 50 degrees C gave a gel from 1 to 20% formaldehyde. Sixteen percent BSA also gave a gel with glutaraldehyde from 0.5 to 4%. Cone and plate viscometry showed rapidly increasing viscosity at 4% formaldehyde and 16% BSA at room temperature. At 50 degrees C, gels formed at a low concentration of formaldehyde. Tissue fixation in which the local concentrations of protein may be in excess of 30% is probably more complete than in vitro experiments in which low concentrations of reagents have been used to permit subsequent spectrometry. This was confirmed by polyacrylamide gel electrophoresis of liver.

Radiolysis of aqueous formaldehyde relevant to cometary environments

The radiation chemistry of aqueous solutions of formaldehyde was studied in order to obtain an insight into the possible role of ionizing radiation on cometary environments. Aqueous solutions of 1.0 mol dm-3 formaldehyde were exposed to gamma-radiation in the dose range from 0.01 to 1200 kGy at 298 K. The radiation chemical yield of decomposition of formaldehyde was determined to be: G(-CH2(OH)2)-26.3 +/- 1.2. The high radiation chemical yield of decomposition was explained by a chain reaction initiated by the radical CH(OH)2 with formaldehyde. Computer fitting of the experimental data gives k(CH(OH)2 + CH2(OH)2)- 8.0xl0(1) dm3 mol-1 s-1. In the computer treatment of experimental findings we used 54 equations to consider the radiolysis of water and 11 reactions for the radiolysis of aqueous formaldehyde. Based on previous estimates of the total dose of ionizing radiation that comets have accumulated over 4.6 billion years, we predict a radiation damage-depth curve of formaldehyde in comet nuclei.