Removal of organic contaminants from wastewater with GO/MOFs composites

Graphene oxide/metal-organic frameworks (GO/MOFs) have been prepared via solvothermal synthesis with ferrous sulfate heptahydrate, zirconium acetate and terephthalic acid for the purpose of removing organic pollutants from wastewater. The composites were analyzed using scanning electron microscopy, infrared spectrometry, and XRD. Tetracycline hydrochloride and orange II were implemented as model pollutants to evaluate the efficacy of the GO/MOFs in water purification, in which 50 mg of Zr/Fe-MOFs/GO was mixed with 100 mL of 10 mg/L, 20 mg/L, 30 mg/L, or 50 mg/L tetracycline hydrochloride solution and 25 mg/L, 35 mg/L, 45 mg/L, or 60 mg/L orange II solution, respectively. The removal efficacy after 4 hours was determined to be 96.1%, 75.8%, 55.4%, and 30.1%, and 98.8%, 91.9%, 71.1%, and 66.2%, respectively. The kinetics of pollutant removal was investigated for both tetracycline hydrochloride and orange II and excellent correlation coefficients of greater than 0.99 were obtained. The high efficacy of these MOFs in pollutant removal, coupled with their inexpensive preparation indicates the feasibility of their implementation in strategies for treating waste liquid. As such, it is anticipated that Zr/Fe-MOFs/GO composites will be widely applied in wastewater purification.

UiO-66-NH2 and Zeolite-Templated Carbon Composites for the Degradation and Adsorption of Nerve Agents

Composites of metal-organic frameworks and carbon materials have been suggested to be effective materials for the decomposition of chemical warfare agents. In this study, we synthesized UiO-66-NH2/zeolite-templated carbon (ZTC) composites for the adsorption and decomposition of the nerve agents sarin and soman. UiO-66-NH2/ZTC composites with good dispersion were prepared via a solvothermal method. Characterization studies showed that the composites had higher specific surface areas than pristine UiO-66-NH2, with broad pore size distributions centered at 1-2 nm. Owing to their porous nature, the UiO-66-NH2/ZTC composites could adsorb more water at 80% relative humidity. Among the UiO-66-NH2/ZTC composites, U0.8Z0.2 showed the best degradation performance. Characterization and gas adsorption studies revealed that beta-ZTC in U0.8Z0.2 provided additional adsorption and degradation sites for nerve agents. Among the investigated materials, including the pristine materials, U0.8Z0.2 also exhibited the best protection performance against the nerve agents. These results demonstrate that U0.8Z0.2 has the optimal composition for exploiting the degradation performance of pristine UiO-66-NH2 and the adsorption performance of pristine beta-ZTC.

3D Metal-Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis, Crystal Structures, Gas Adsorption, and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.

Covalent Organic Framework Composites: Synthesis and Analytical Applications

In the recent years, composite materials containing covalent organic frameworks (COFs) have raised increasing interest for analytical applications. To date, various synthesis techniques have emerged that allow for the preparation of crystalline and porous COF composites with various materials. Herein, we summarize the most common methods used to gain access to crystalline COF composites with magnetic nanoparticles, other oxide materials, graphene and graphene oxide, and metal nanoparticles. Additionally, some examples of stainless steel, polymer, and metal-organic framework composites are presented. Thereafter, we discuss the use of these composites for chromatographic separation, environmental remediation, and sensing.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

Sensitive detection of carcinoembryonic antigen (CEA) by a sandwich-type electrochemical immunosensor using MOF-Ce@HA/Ag-HRP-Ab2 as a nanoprobe

Sandwich-type electrochemical immunosensor was one of the main methods for detecting carcinoembryonic antigen (CEA). In this work, using Ce-MoF as the skeleton precursor, hyaluronic acid (HA) was coated on the surface of Ce-metal organic framework (Ce-MoF), which loaded with silver nanoparticles (Ag NPs) and horseradish peroxidase (HRP) to catalyze H₂O₂ and double amplified the current signal. Thus, a sensitive sandwich-type electrochemical immunosensor (Ce-MoF@ HA/Ag-HRP) was designed to detect carcinoembryonic antigen (CEA). The designed immunosensor used Au NPs to enhance the ability of attach more the first antibody (Ab₁). This was due to Au NPs had good electrical conductivity and biocompatibility to accelerate electron transfer on the surface of the electrode. HA was riched in -COOH, -OH and had excellent biocompatibility, which can carry more Ag NPs to catalyze H₂O₂. Finally, the prepared sandwich-type electrochemical immunosensor had excellent biocompatibility and great catalytic performance. The immunosensor can be tested within 30 min and the logarithm of the current signal and CEA concentration showed a broad linear response range of 1 pg ml^-1-80 ng ml^-1, and the detection limit of CEA was 0.2 pg ml^-1. More importantly, the proposed immunosensor had good reproducibility, selectivity, stability and without matrix effect. This confirmed that the proposed immunosensor had broad prospects in early clinical trials.

MnO2/rGO/CNTs Framework as a Sulfur Host for High-Performance Li-S Batteries

Lithium-sulfur batteries are very promising next-generation energy storage batteries due to their high theoretical specific capacity. However, the shuttle effect of lithium-sulfur batteries is one of the important bottlenecks that limits its rapid development. Herein, physical and chemical dual adsorption of lithium polysulfides are achieved by designing a novel framework structure consisting of MnO2, reduced graphene oxide (rGO), and carbon nanotubes (CNTs). The framework-structure composite of MnO2/rGO/CNTs is prepared by a simple hydrothermal method. The framework exhibits a uniform and abundant mesoporous structure (concentrating in ~12 nm). MnO2 is an α phase structure and the α-MnO2 also has a significant effect on the adsorption of lithium polysulfides. The rGO and CNTs provide a good physical adsorption interaction and good electronic conductivity for the dissolved polysulfides. As a result, the MnO2/rGO/CNTs/S cathode delivered a high initial capacity of 1201 mAh g-1 at 0.2 C. The average capacities were 916 mAh g-1, 736 mAh g-1, and 547 mAh g-1 at the current densities of 0.5 C, 1 C, and 2 C, respectively. In addition, when tested at 0.5 C, the MnO2/rGO/CNTs/S exhibited a high initial capacity of 1010 mAh g-1 and achieved 780 mAh g-1 after 200 cycles, with a low capacity decay rate of 0.11% per cycle. This framework-structure composite provides a simple way to improve the electrochemical performance of Li-S batteries.

Highly bioactive zeolitic imidazolate framework-8-capped nanotherapeutics for efficient reversal of reperfusion-induced injury in ischemic stroke

Rational design of potent antioxidative agent with high biocompatibility is urgently needed to treat ischemic reperfusion-induced ROS-mediated cerebrovascular and neural injury during ischemia strokes. Here, we demonstrate an in situ synthetic strategy of bioactive zeolitic imidazolate framework-8-capped ceria nanoparticles (CeO₂@ZIF-8 NPs) to achieve enhanced catalytic and antioxidative activities and improved stroke therapeutic efficacy. This nanosystem exhibits prolonged blood circulation time, reduced clearance rate, improved BBB penetration ability, and enhanced brain accumulation, where it effectively inhibits the lipid peroxidation in brain tissues in middle cerebral artery occlusion mice and reduces the oxidative damage and apoptosis of neurons in brain tissue. CeO₂@ZIF-8 also suppresses inflammation- and immune response-induced injury by suppressing the activation of astrocytes and secretion of proinflammatory cytokines, thus achieving satisfactory prevention and treatment in neuroprotective therapy. This study also sheds light on the neuroprotective action mechanisms of ZIF-8-capped nanomedicine against reperfusion-induced injury in ischemic stroke.

Swell and Destroy: A Metal-Organic Framework-Containing Polymer Sponge That Immobilizes and Catalytically Degrades Nerve Agents

Organophosphorus chemical warfare agents function as potent neurotoxins. Whilst the destruction of nerve agents is most readily achieved by hydrolysis, their storage and transport are hazardous and lethal in milligram doses, with any spillage resulting in fatalities. Furthermore, current decontamination and remediation measures are limited by a need for stoichiometric reagents, solvents, and buffered solutions, complicating the process for the treatment of bulk contaminants. Herein, we report a composite polymer material capable of rendering bulk VX unusable by immobilization within a porous polymer until a metal-organic framework (MOF) catalyst fully hydrolyzes the neurotoxin. This is an all-in-one capability that minimizes the use of multiple reagents, facilitated by a porous high internal phase emulsion-based polystyrene monolith housing an active zirconia MOF catalyst (MOF-808); the porous polymer absorbs and immobilizes the liquid agents, while the MOF enables hydrolysis. The dichotomous hierarchy of porous materials facilitates the containment and rapid hydrolysis of VX (>80% degradation in 8 h) in the presence of excess H₂O. This composite can further enable the hydrolysis of neat VX with reliance on ambient humidity (>95% in 11 days). Potentially, 4.5 kg of the composite can absorb, immobilize, and degrade the contents of a standard chemical drum/barrel (208 L, 55 gal) of the chemical warfare agent (CWA). We believe that this composite is the first example of what will be the go-to approach for CWA immobilization and degradation in the future. Furthermore, we believe that this demonstration of a catalytically reusable absorbent sponge provides a signpost for the development of similar materials where immobilization of a substrate in a catalytically active environment is desirable.

Highly Stable Zinc-Based Metal-Organic Frameworks and Corresponding Flexible Composites for Removal and Detection of Antibiotics in Water

Antibiotic contamination of water bodies is a major environmental concern. Exposure to superfluous antibiotics is an ecological stressor correlated to the development of antibiotic resistance. Thus, it is imperative that effective methods are developed to simultaneously detect and remove such antibiotics so as to avoid inadvertent release. Herein, two flexible three-dimensional (3D) zinc-based metal-organic frameworks (MOFs) {[Zn₂(bcob)(OH)(H₂O)]·DMA}_n (ROD-Zn1) and {[Zn(Hbcob)]·(solvent)}_n (ROD-Zn2) (H₃bcob = 1,3-bis((4'-carboxylbenzyl)oxy)benzoic acid) with rod second building units (SBUs) are successfully prepared. Their exceptional water and chemical stabilities (toward both acid and base), fast sorption kinetics, and unique framework endow the MOFs with excellent uptake capacity toward various antibiotics in the aqueous environment. The adsorption performance was further optimized by one-pot preparation of MOF-melamine foam (MF) hybrid composites, resulting in a hierarchical microporous-macroporous MOF@MF system (ROD-Zn1@MF and ROD-Zn2@MF), which are readily recyclable after adsorptive capture. The mechanisms of adsorption have been deeply investigated by static and competitive adsorption experiments. In addition, the MOFs exhibit excellent fluorescent properties and quenched by trace amounts of antibiotics in water solution. Therefore, ROD-Zn1 and ROD-Zn2 present a dual-functional performance, being promising candidates for detection and removal of antibiotics.

Hemin-Bridged MOF Interface with Double Amplification of G-Quadruplex Payload and DNAzyme Catalysis: Ultrasensitive Lasting Chemiluminescence MicroRNA Imaging

Here, we report a double-amplified sensing platform for ultrasensitive chemiluminescence (CL) miRNA detection in real patients' blood in which a hemin-bridged metal-organic framework (MOF) is employed as a functional interface to boost the payload and catalysis of G-quadruplex (G4) DNAzymes. Hemin is here used as the organic ligand for the MOF synthesis, which endows the MOF with an intrinsic peroxidase-like catalytic activity. Most importantly, the MOF surface provides a large amount of binding sites for polymeric G4 DNAzymes that are produced by miRNA-triggered rolling circle amplification reactions, and meanwhile, the interfaced G4 DNAzymes on MOFs (G4/MOFzymes) display an about 100-fold higher catalytic activity than those in solution. By using the G4/MOFzyme catalysts in the luminol/H₂O₂ CL system, the amplification detection of two acute myocardial infarction (AMI)-related miRNAs (low to 1 fM seen with naked eyes) is achieved in human serum with a smartphone as a portable imaging detector, which provides a facile methodology for point-of-care (POC) diagnosis of AMI. Compared with previous smartphone-based counterparts not requiring sophisticated equipment, this new facile methodology shows both 6 orders of magnitude higher sensitivity and an ∼50-fold longer duration for CL miRNA imaging. These unique features allow our developed G4/MOFzymes to be further employed as a novel luminescent ink for printing commonly used patterns.

Fe-Loaded MOF-545(Fe): Peroxidase-Like Activity for Dye Degradation Dyes and High Adsorption for the Removal of Dyes from Wastewater

Methods to remove dye pollutants with natural enzyme, like horseradish peroxidase (HRP), are still limited due to high costs and low stability levels. The development of such a method with similar enzymatic activity is important and could be helpful in wastewater disposal. A metal organic framework material, Fe-loaded MOF-545 (Fe), was synthesized in our study as a new way to remove dyes due to its peroxidase-like activity. The structural characterizations of Fe-loaded MOF-545(Fe) was investigated using scanning electron microscopy (SEM), UV-Vis absorption spectra, and X-ray diffraction (XRD). The peroxidase-like (POD-like) activity of Fe-loaded MOF-545(Fe) was investigated under different pH and temperature conditions. Because of the Fe added into the MOF-545 structure, the absorption of Fe-loaded MOF-545(Fe) for acid (anionic) dyes (methyl orange (MO)) was better than for basic (cationic) dyes (methylene blue (MB)). The Fe-loaded MOF-545(Fe) could give a significant color fading for MO and MB over a short time (about two hours) with peroxidase-like activity. The remarkable capacity of Fe-loaded MOF-545(Fe) to remove the MO or MB is due to not only physical adsorption, but also degradation of the MO and MB with POD-like activity. Therefore, Fe-loaded MOF-545(Fe) has significant potential regarding dye removal from wastewater.

Hydrothermal Synthesize of HF-Free MIL-100(Fe) for Isoniazid-Drug Delivery

Sustainable development of drug delivery materials with good biocompatibility and controlled-release is a popular topic among researchers. In this research study, we demonstrated the potential of the metal-organic framework, that is MIL-100(Fe), as a drug delivery platform for isoniazid (INH). The MIL-100(Fe) was prepared by using the hydrofluoric acid-free hydrothermal method. Several physical measurements were conducted to characterize the MIL-100(Fe), including x-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen sorption, and thermal-gravimetric (TG). The synthesized MIL-100(Fe) has octahedron-shaped particles with superior properties, that is large surface area (1456.10 m2/g) and pore volume (1.25 cm3/g). The drug loading rate and capacity were determined by means of adsorption kinetic and isotherm. The studied INH@MIL-100(Fe) adsorption system kinetics follow the pseudo-first-order model, while the isotherm system follows the Langmuir model with the maximum adsorption capacity of 128.5 mg/g at 30 °C. MIL-100(Fe) shows adequate biocompatibility, also exhibits a reasonable and controlled drug release kinetics. The results obtained show that MIL-100 (Fe) can be a good choice of drug delivery platform among other available platforms.

Metal-Organic Frameworks of MIL-100(Fe, Cr) and MIL-101(Cr) for Aromatic Amines Adsorption from Aqueous Solutions

MIL-100(Fe, Cr) and MIL-101(Cr) were synthesized by the hydrothermal method and applied to the adsorptions of five aromatic amines from aqueous solutions. These three metal-organic frameworks (MOFs) were well characterized by powder X-ray diffraction (PXRD), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and surface area analysis. The adsorption mechanism of three MOFs and the effects of the structures of MOFs on the adsorption of aromatic amines were discussed. The results show that the cavity system and suitable hydrogen bond acceptor were important factors for the adsorption for five aromatic amines of aniline, 1-naphthalamine, o-toluidine, 2-amino-4-nitrotoluene and 2-nitroaniline: (a) the saturated adsorption capacity of aniline, 1-naphthylamine and o-toluidine on MIL-100(Fe) were 52.0, 53.4 and 49.6 mg/g, respectively, which can be attributed to the intermolecular hydrogen bond interaction and cavity system diffusion. (b) The adsorption capacity of 2-nitroaniline and 2-amino-4-nitrotoluene on MIL-101(Cr) were 54.3 and 25.0 mg/g, respectively, which can be attributed to the more suitable pore size of MIL-101(Cr) than that of MIL-100(Fe, Cr). The MOFs of MIL-100(Fe) and MIL-101(Cr) can be potential materials for removing aromatic amines from aqueous solutions.

Hierarchical Micro- and Mesoporous Zn-Based Metal-Organic Frameworks Templated by Hydrogels: Their Use for Enzyme Immobilization and Catalysis of Knoevenagel Reaction

Encapsulation of enzymes in metal-organic frameworks (MOFs) is often obstructed by the small size of the orifices typical of most reported MOFs, which prevent the passage of larger-size enzymes. Here, the preparation of hierarchical micro- and mesoporous Zn-based MOFs via the templated emulsification method using hydrogels as a template is presented. Zinc-based hydrogels featuring a 3D interconnecting network are first produced via the formation of hydrogen bonds between melamine and salicylic acid in which zinc ions are well distributed. Further coordination with organic linkers followed by the removal of the hydrogel template produces hierarchical Zn-based MOFs containing both micropores and mesopores. These new MOFs are used for the encapsulation of glucose oxidase and horseradish peroxidase to prove the concept. The immobilized enzymes exhibit a remarkably enhanced increased operational stability and enzymatic activity with a k_cat /k_m value of 85.68 mm s^-1 . This value is 7.7-fold higher compared to that found for the free enzymes in solution, and 2.7-fold higher than enzymes adsorbed on conventional microporous MOFs. The much higher catalytic activity of the mesoporous conjugate for Knoevenagel reactions is demonstrated, since the large pores enable easier access to the active sites, and compared with that observed for catalysis using microporous MOFs.

Toxicity screening of two prevalent metal organic frameworks for therapeutic use in human lung epithelial cells

INTRODUCTION

The flexibility and tunability of metal organic frameworks (MOFs), crystalline porous materials composed of a network of metal ions coordinated by organic ligands, confer their variety of applications as drug delivery systems or as sensing and imaging agents. However, such properties also add to the difficulty in ensuring their safe implementation when interaction with biological systems is considered.

METHODS

In the current study, we used real-time sensorial strategies and cellular-based approaches to allow for fast and effective screening of two MOFs of prevalent use, namely, MIL-160 representative of a hydrophilic and ZIF-8 representative of a hydrophobic framework. The two MOFs were synthesized "in house" and exposed to human bronchial epithelial (BEAS-2B) cells, a pertinent toxicological screening model.

RESULTS

Analysis allowed evaluation and differentiation of particle-induced cellular effects as well identification of different degrees and routes of toxicity, all in a high-throughput manner. Our results show the importance of performing screening toxicity assessments before introducing MOFs to biomedical applications.

DISCUSSION

Our proposed screening assays could be extended to a wider variety of cell lines to allow for identification of any deleterious effects of MOFs, with the range of toxic mechanisms to be differentiated based on cell viability, morphology and cell-substrate interactions, respectively.

CONCLUSION

Our analysis highlights the importance of considering the physicochemical properties of MOFs when recommending a MOF-based therapeutic option or MOFs implementation in biomedical applications.

Fe-Containing MOFs as Seeds for the Preparation of Highly Active Fe/Al-SBA-15 Catalysts in the NAlkylation of Aniline

We have successfully incorporated iron species into mesoporous aluminosilicates (Al-SBA-15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-MS), pyridine (PY) and 2,6-dimethylpyridine (DMPY) pulse chromatography titration, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The catalysts were tested in the N-alkylation reaction of aniline with benzyl alcohol for imine production. According to the results, the iron sources, acidity of catalyst and reaction conditions were important factors influencing the reaction. The catalyst showed excellent catalytic performance, achieving 97% of aniline conversion and 96% of imine selectivity under optimized conditions.

Ultrafine Silver Nanoparticles Embedded in Cyclodextrin Metal-Organic Frameworks with GRGDS Functionalization to Promote Antibacterial and Wound Healing Application

The challenge of bacterial infection increases the risk of mortality and morbidity in acute and chronic wound healing. Silver nanoparticles (Ag NPs) are a promising new version of conventional antibacterial nanosystem to fight against the bacterial resistance in concern of the drug discovery void. However, there are several challenges in controlling the size and colloidal stability of Ag NPs, which readily aggregate or coalesce in both solid and aqueous state. In this study, a template-guided synthesis of ultrafine Ag NPs of around 2 nm using water-soluble and biocompatible γ-cyclodextrin metal-organic frameworks (CD-MOFs) is reported. The CD-MOF based synthetic strategy integrates AgNO₃ reduction and Ag NPs immobilization in one pot achieving dual functions of reduced particle size and enhanced stability. Meanwhile, the synthesized Ag NPs are easily dispersible in aqueous media and exhibit effective bacterial inhibition. The surface modification of cross-linked CD-MOF particles with GRGDS peptide boosts the hemostatic effect that further enhances wound healing in synergy with the antibacterial effect. Hence, the strategy of ultrafine Ag NPs synthesis and immobilization in CD-MOFs together with GRGDS modification holds promising potential for the rational design of effective wound healing devices.

In Vitro Toxicity Study of a Porous Iron(III) Metal‒Organic Framework

A MIL series metal‒organic framework (MOF), MIL-100(Fe), was successfully synthesized at the nanoscale and fully characterized by TEM, TGA, XRD, FTIR, DLS, and BET. A toxicological assessment was performed using two different cell lines: human normal liver cells (HL-7702) and hepatocellular carcinoma (HepG2). In vitro cytotoxicity of MIL-100(Fe) was evaluated by the MTT assay, LDH releasing rate assay, DAPI staining, and annexin V/PI double staining assay. The safe dose of MIL-100(Fe) was 80 μg/mL. It exhibited good biocompatibility, low cytotoxicity, and high cell survival rate (HL-7702 cells' viability >85.97%, HepG2 cells' viability >91.20%). Therefore, MIL-100(Fe) has a potential application as a drug carrier.

Metal-organic frameworks induce autophagy in mouse embryonic fibroblast cells

Autophagy is the lysosomal-dependent degradation process of intracellular substances in adaptation to environmental or developmental changes. It plays an essential role in maintaining cellular homeostasis while its dysfunction is involved in various human diseases. The regulation of autophagy has attracted more and more attention with the promise for improving treatment of diseases as a potential therapeutic target. Metal-organic frameworks (MOFs), as emerging biomaterials, have been investigated in the biological and biomedical fields in recent years. Therefore, it is interesting and significant to study the effects of MOFs on living cells from safety aspects as well as the therapeutic viewpoint, especially their effects on autophagy which have not been reported yet. In this study, the effects of Fe-MIL-101_NH2 on mouse embryonic fibroblasts (MEFs) were investigated and the potential applications of these nanoparticles in the regulation of autophagy were explored. Our results demonstrated that Fe-MIL-101_NH2 induced cytoprotective autophagy in MEFs instead of cytotoxicity. The activation of autophagy kept reactive oxygen species from accumulating, which protected MEFs from apoptosis. Further exploration of the possible mechanisms of MOF-induced autophagy revealed that the inhibition of mTOR pathway as well as the enhancement of Becline1 and Atg5 contributed to autophagy induction. Our study uncovered the autophagic effects and mechanistic insights of MOFs, which will be beneficial and meaningful to the safety evaluation and the reasonable and effective usage of MOFs.

Porous Gold Nanoshells on Functional NH2 -MOFs: Facile Synthesis and Designable Platforms for Cancer Multiple Therapy

AuroShell nanoparticles (sealed gold nanoshell on silica) are the only inorganic materials that are approved for clinical trial for photothermal ablation of solid tumors. Based on that, porous gold nanoshell structures are thus critical for cancer multiple theranostics in the future owing to their inherent cargo-loading ability. Nevertheless, adjusting the diverse experimental parameters of the reported procedures to obtain porous gold nanoshell structures is challenging. Herein, a series of amino-functionalized porous metal-organic frameworks (NH₂ -MOFs) nanoparticles are uncovered as superior templates for porous gold nanoshell deposition (NH₂ -MOFs@Au_shell ) by means of a more facile and general one-step method, which combines the enriched functionalities of NH₂ -MOFs with those of porous gold nanoshells. Moreover, in order to illustrate the promising applications of this method in biomedicine, platinum nanozymes-encapsulated NH₂ -MOFs are further designed with porous gold nanoshell coating and photosensitizer chlorin e6 (Ce6)-loaded nanoparticles with continuous O₂ -evolving ability (Pt@UiO-66-NH₂ @Au_shell -Ce6). The combination of photodynamic and photothermal therapy is then carried out both in vitro and in vivo, achieving excellent synergistic therapeutic outcomes. Therefore, this work not only presents a facile strategy to fabricate functionalized porous gold nanoshell structures, but also illustrates an excellent synergistic tumor therapy strategy.