Modulation of physico-chemical and technofunctional properties of quinoa protein isolate: Effect of precipitation acid

The typically low solubility and gelation capacity of plant proteins can impose challenges in the design of high-quality plant-based foods. The acid used during the precipitation step of plant protein isolate extraction can influence protein functionality. Here, acetic acid and citric acid were used to extract quinoa protein isolate (QPI) from quinoa flour, as these acids are more kosmotropic than the commonly used HCl, promoting the stabilisation of the native protein structure. While proximate analysis showed that total protein was similar for the three isolates, precipitation with kosmotropic acids increased soluble protein, which correlated positively with gel strength. Microstructure analysis revealed that these gels contained a less porous protein network with lipid droplet inclusions. This study shows that the choice of precipitation acid offers an opportunity to tailor the properties of quinoa protein isolate for application, a strategy that is likely applicable to other plant protein isolates.

Techno-functional properties and allergenicity of mung bean (Vigna radiata) protein isolates from Imara and KPS2 varieties

Mung bean is an increasingly cultivated legume. This study compared mung bean varieties 'KPS2' from Thailand (Th) and 'Imara' from Tanzania (T) with a focus on protein composition, allergenicity, and techno-functional properties. Two rounds alkaline-acid extraction were performed to produce mung bean protein isolate (MBPI - Th1/T1 and Th2/T2), supernatant (S) and protein-poor residue (PPR). Mass spectrometric analysis revealed high abundance of 8 s-vicilin and 11 s-legumin in MBPI and S. Extraction removed considerable amounts of the seed albumin allergen but increased the relative abundance of cupins in MBPI. Higher vicilin levels were found in Th1 samples, contributed to increased protein solubility above pH 6.5. Th formed stronger gels which were more stable at higher frequencies. In contrast, T proteins were structurally more flexible, leading to its improved foaming ability. This study provides the knowledge and methods for appropriate selection of mung bean varieties for various food applications.

Fibrillation of soy protein isolate in the presence of metal ions: Structure and gelation behavior

The structure and functional properties of protein fibrils are closely related to environmental factors in fibrillation. Herein, soy protein isolate fibrils (SPIFs, 22 mg/mL) were prepared under acid-heating conditions in the presence of 100 mM metal ions (K+, Na+, Ca2+, Mg2+, and Fe3+). Except for Fe3+, fibrillation and subsequent larger fibril aggregates were promoted, ultimately leading to gel formation. Compared with K+ or Na+, the addition of Ca2+ or Mg2+ resulted in more organized SPIF structures with increased β-sheet contents and higher ThT fluorescence intensities. Furthermore, both of them resulted in longer fibrils with an average contour length of 700-800 nm, which significantly enhanced the storage modulus. However, the presence of Fe3+ accelerated protein hydrolysis and inhibited SPIF formation, resulting in samples consistently exhibited liquid behavior. These findings provide a foundation for understanding the influence of metal ions on regulating the fibrillation and gelling properties of SPIFs.

Acid-induced pea protein gels pretreated with media milling: Gelling properties and the formation mechanism

This study explored the effect of stirred media mill (SMM) processing on the acid-induced gelling properties of pea protein. Results showed that SMM treatment enhanced the gel strength from 75.06 g to 183.89 g and increased the water holding capacity from 46.64 % to 73.50 %. The minimum gelation concentration achieved for SMM-treated pea protein was 4 %, significantly lower than that of heat-pretreated pea protein (9 %). SMM decreased protein aggregate size from 104 μm to 180 nm. Microscopy analysis revealed that the small aggregates facilitated the formation of uniform gel networks with tight connections. Linear rheology indicated that small protein aggregates resulted in slower gelation rates with a higher G' for the formed gels. The SMM-pretreated protein gel showed strain hardening, shear thinning behaviors, and satisfactory stability to withstand large-amplitude oscillatory shear. Overall, SMM emerges as a promising technology for producing protein gel products with strong mechanical attributes and customizable rheological properties.

Structural evolution of maize starches with different amylose content during pasting and gelation as evidenced by Rapid Visco Analyser

This study examined multi-scale structural alterations of maize starches varying in amylose content during pasting and gelation, using Rapid Visco Analyser (RVA). At 50 °C, starch granules maintained their morphology with low viscosity. As the temperature increased to 95 °C, helical and crystal structures were destroyed, leading to granule swelling, distortion and porosity, as identified by Wide Angle X-ray Scattering and Fourier Transforms Infrared measurements at 90% moisture. This resulted in increased viscosity and the formation of a loose gel network structure. Subsequently, maintaining the temperature at 95 °C caused a decrease in viscosity as most granules disappeared, forming a reorganized flaky gel structure with larger pores. As the temperature decreased, gel porosity reduced. In high amylose content starch, the viscosity remained low and granules were partially gelatinized since the heating temperature was below the gelatinization temperature. This study is the first to detail starch multilevel structural dynamics during RVA gelatinization.

Insight into the mechanisms of combining direct current magnetic field with phosphate in promoting emulsifying properties of myofibrillar protein

This study investigated the combined effects of direct-current magnetic field (DC-MF, 9.5 mT) and tetrasodium-pyrophosphate (TSPP, 1-5 g/L) on emulsified gel properties of porcine myofibrillar protein (MP). Results showed that MP at DC-MF and 3 g/L TSPP had decreased spectrum intensity of UV and fluorescence compared to that without DC-MF, owing to the changes of MP tertiary structure caused by DC-MF, especially tryptophan and tyrosine. The emulsion treated with DC-MF behaved better emulsifying activity and stability than that without DC-MF under such condition. And emulsion had lower creaming index and better storage stability. Gels prepared by this MP emulsion had low porosity and stable structure, accompanying with smaller size and more uniform distribution of oil droplets. Microstructure images showed that gels were covered with microporous structure, which was conducive to the good WHC of the emulsified gels (97.12%). These results showed the feasibility of DC-MF and TSPP in improving MP emulsion/emulsified gel.

Effect of vegetable oils on the thermal gel properties of PSE-like chicken breast meat protein isolate-based emulsion gels

To enhance the gel properties of PSE (pale, soft, and exudative)-like chicken meat protein isolate (PPI), the effect of peanut, corn, soybean, and sunflower oils on the gel properties of PPI emulsion gels was investigated. Vegetable oils improved emulsion stability and gel strength and enhanced viscosity and elasticity. The gel strength of the PPI-sunflower oil emulsion gel increased by 163.30 %. The thermal denaturation temperature and enthalpy values were increased. They decreased the particle size of PPI emulsion (P < 0.05) and changed the three-dimensional network structure of PPI emulsion gels from reticular to sheet with a smooth surface and pore-reduced lamellar. They elevated the content of immobile water PPI emulsion gels, decreased the α-helix and β-turn, and increased the β-sheet and random coil. Vegetable oil improved the gel properties of PPI in the following order: sunflower oil > soybean oil > corn oil ≈ peanut oil > control group.

Injectable hydrogels based on alginates grafted with LCST side-chains of different chemistry

A homologous series of thermoassociating copolymers was prepared by grafting onto alginates different amounts of three different temperature responsive polymers: poly(N-isopropylacrylamide), poly(di(ethylene glycol)methacrylate) and poly(ethylene oxide-co-propylene oxide). From a large set of analytical techniques combining rheology, calorimetry, NMR and SAXS, the relevant parameters controlling the sol/gel transition and the gel properties, mainly the degree of entanglement of macromolecules and the fraction of responsive stickers, were highlighted and interpreted objectively by considering the particularities of the phase diagrams of LCST polymers. Complementary analyses were implemented to investigate adhesiveness, injectabilty, gel swelling and molecular release in physiological environment of thermogelling formulations. In particular, it is shown that steady shear experiments allow to predict the injection forces by taking into account the characteristics of the system (syringe and needle), and that the rapid gelation of the formulations when they are heated at 37 °C delays the release of small molecules into the environment. The overall set of data is discussed in the framework of scaling relations in order to draw quantitative guidelines for the design of injectable thermoresponsive hydrogels.

Effect of limited proteolysis and CaCl2 on the rheology, microstructure and in vitro digestibility of pea protein-carboxymethyl cellulose mixed gel

Limited proteolysis, CaCl2 and carboxymethyl cellulose (CMC) have individually demonstrated ability to increase the gel strength of laboratory-extracted plant proteins. However, the syneresis effects of their combination on the gelling capacity of commercial plant protein remains unclear. This was investigated by measuring the rheological property, microstructure and protein-protein interactions of gels formed from Alcalase hydrolyzed or intact pea proteins in the presence of 0.1 % CMC and 0-25 mM CaCl2. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed the molecular weight of pea protein in the mixture were < 15 kDa after hydrolysis. The hydrolysates showed higher intrinsic fluorescence intensity and lower surface hydrophobicity than the intact proteins. Rheology showed that the storage modulus (G') of hydrolyzed pea protein (PPH)-based gels sightly decreased compared to those of native proteins. 5-15 mM CaCl2 increased the G' for both PP and PPH-based gels and decreased the strain in the creep-recovery test. Scanning electron microscopy (SEM) showed the presence of smaller protein aggregates in the PPH-based gels compared to PP gels and the gel network became denser, and more compact and heterogenous in the presence of 15 and 25 mM CaCl2. The gel dissociation assay revealed that hydrophobic interactions and hydrogen bonds were the dominant forces to maintain the gel structure. In vitro digestion showed that the soluble protein content in PPH-based gels was 10 ∼ 30 % higher compared to those of the PP counterpart. CaCl2 addition reduced protein digestibility with a concentration dependent behavior. The results obtained show contrasting effects of limited proteolysis and CaCl2 on the gelling capacity and digestibility of commercial pea proteins. These findings offer practical guidelines for developing pea protein-based food products with a balanced texture and protein nutrition through formulation and enzymatic pre-treatment.

N-Hydroxyalkanamide Based Organo/hydrogels as Novel Scaffolds for pH-Dependent Metronidazole and Theophylline Release

The traditional delivery of metronidazole and theophylline presents challenges like bitter taste, variable absorption, and side effects. However, gel-based systems offer advantages including enhanced targeted drug delivery, minimized side effects, and improved patient compliance, effectively addressing these challenges. Consequently, a cost-effective synthesis of N-hydroxyalkanamide gelators with varying alkyl chain lengths was achieved in a single-step reaction procedure. These gelators formed self-assembled aggregates in DMSO/water solvent system, resulting in organo/hydrogels at a minimum gelation concentration of 1.5 % w/v. Subsequently, metronidazole and theophylline were encapsulated within the gel core and released through gel-to-sol transition triggered by pH variation at 37 °C, while maintaining the structural-activity relationship. UV-vis spectroscopy was employed to observe the drug release behavior. Furthermore, in vitro cytotoxicity assays revealed cytotoxic effects against A549 lung adenocarcinoma cells, indicating anti-proliferative activity against human lung cancer cells. Specifically, the gel containing theophylline (16HAD+Th) exhibited cytotoxicity on cancerous A549 cells with IC50 values of 19.23±0.6 μg/mL, followed by the gel containing metronidazole (16HAD+Mz) with IC50 values of 23.75±0.7 μg/mL. Moreover, the system demonstrated comparable antibacterial activity against both gram-negative (E. coli) and gram-positive bacteria (S. aureus).

Laboratory-scale characterization of slow-release permanganate gel (SRP-G) for the in-situ treatment of chlorinated-solvent groundwater plumes

Significant challenges remain for the remediation of chlorinated-solvent plumes in groundwater, such as trichloroethene (TCE) and tetrachloroethene (PCE). A novel slow-release permanganate gel (SRP-G) technique may show promise for the in-situ treatment (remediation) of chlorinated contaminant plumes in groundwater. A series of laboratory experiments were conducted to characterize the primary physical factors that influence SRP-G gelation processes to optimize SRP-G performance for plume treatment. Specifically, experiments were conducted to quantify gel zeta potential, particle size distribution, and viscosity to determine SRP-G gelation characteristics and processes. These experiments tested various concentrations of two SRP-G amendment solutions (NaMnO4 and KMnO4) prepared with 30-wt.% and 50-wt.% colloidal silica to determine such influences on zeta potential, particle size distribution, and viscosity. The results of this study show that SRP-G solutions with low zeta potential and relatively high pH favor more rapid SRP-G gelation. The concomitant interaction of the predominantly negatively charged colloidal silica particles and the positively charged dissociated cations (Na+ and K+) in the SRP-G solution had the effect of stabilizing charge imbalance via attraction of particles and thereby inducing a greater influence on the gelation process. Gel particle size distribution and changes in viscosity had a significant influence on SRP-G solution gelation. The addition of permanganate (NaMnO4 or KMnO4) increased the average particle size distribution and the viscosity of the SRP-G solution and decreased the overall gelation time. SRP-G amendments (NaMnO4 or KMnO4) prepared with 50-wt.% colloidal silica showed more effective gelation (and reduced gelation time) compared to SRP-G amendments prepared with 30-wt.% colloidal silica. Under the conditions of these experiments, it was determined that both the 7-wt.% NaMnO4 solution and 90 mg/L KMnO4 solution using 50-wt.% colloidal silica would be the optimal injection SRP-G solution concentrations for this in-situ treatment technique.

A novel approach has been developed to produce pure plant-based gel soy yogurt by combining soy proteins (7S/11S), high pressure homogenization, and glycation reaction

This research sought to examine how the physicochemical characteristics of soy globulins and different processing techniques influence the gel properties of soy yogurt. The goal was to improve these gel properties and rectify any texture issues in soy yogurt, ultimately aiming to produce premium-quality plant-based soy yogurt. In this research study, the investigation focused on examining the impact of 7S/11S, homogenization pressure, and glycation modified with glucose on the gel properties of soy yogurt. A plant-based soy yogurt with superior gel and texture properties was successfully developed using a 7S/11S globulin-glucose conjugate at a 1:3 ratio and a homogenization pressure of 110 MPa. Compared to soy yogurt supplemented with pectin or gelatin, this yogurt demonstrated enhanced characteristics. These findings provide valuable insights into advancing plant protein gels and serve as a reference for cultivating new soybean varieties by soybean breeding experts.

Effects of different temperatures on the physicochemical characteristics, microstructure and protein structure of preserved egg yolk

To clarify the mechanism of lower temperatures promoted the solidification of preserved egg yolk, the effects of temperature (4 °C, 10 °C and 25 °C) on the physicochemical properties, microstructure and protein structure of preserved egg yolk were studied. Results showed that the exterior egg yolk (EEY) exhibited higher pH, hardness and free sulfhydryl content at low-temperature pickling. The microstructure showed that the EEY gradually formed a denser gel network structure at lower temperatures. Electrophoresis results and Fourier transform infrared spectroscopy (FTIR) indicated that there were different degrees of protein degradation and cross-linking of proteins in the IEY (the interior egg yolk) and EEY and the decrease of β-sheets in the secondary structure was accompanied by an increase of β-turns during the formation of egg yolk gels. These results indicated that egg yolk solidification was faster and denser gel structure at 4 °C and 10 °C.

Solvent-Driven Self-Assembly of One-Dimensional Lepidocrocite Titanium-Oxide-Based Nanofilaments

Herein, the self-assembly of one-dimensional titanium oxide lepidocrocite nanofilaments in 10 different water miscible organic solvents was investigated. The nanofilament snippets, with minimal cross sections of ∼5 × 7 Å2 and lengths around 30 nm, begin as an aqueous colloidal suspension. Upon addition, and brief mixing, of the colloidal suspension into a given solvent, a multitude of morphologies─seemingly based on the hydrophilicity and polarity of the solvent─emerge. These morphologies vary between sheets, highly networked webs, and discrete fibers, all with no apparent change in the lepidocrocite structure. On the micro- and nanoscale, the morphologies are reminiscent of biological, rather than inorganic, materials. The results of this work give insight into the self-assembly of these materials and offer new pathways for novel macrostructures/morphologies assembled from these highly adsorbent and catalytically active low-dimensional materials.

Combined experiments and molecular simulations for understanding the thermo-responsive behavior and gelation of methylated glucans with different glycosidic linkages

HYPOTHESIS

Elucidation of the micro-mechanisms of sol-gel transition of gelling glucans with different glycosidic linkages is crucial for understanding their structure-property relationship and for various applications. Glucans with distinct molecular chain structures exhibit unique gelation behaviors. The disparate gelation phenomena observed in two methylated glucans, methylated (1,3)-β-d-glucan of curdlan (MECD) and methylated (1,4)-β-d-glucan of cellulose (MC), notwithstanding their equivalent degrees of substitution, are intricately linked to their unique molecular architectures and interactions between glucan and water.

EXPERIMENTS

Density functional theory and molecular dynamics simulations focused on the electronic property distinctions between MECD and MC, alongside conformational variations during thermal gelation. Inline attenuated total reflection Fourier transform infrared spectroscopy tracked secondary structure alterations in MECD and MC. To corroborate the simulation results, additional analyses including circular dichroism, rheology, and micro-differential scanning calorimetry were performed.

FINDINGS

Despite having similar thermally induced gel networks, MECD and MC display distinct physical gelation patterns and molecular-level conformational changes during gelation. The network of MC gel was formed via a "coil-to-ring" transition, followed by ring stacking. In contrast, the MECD gel comprised compact irregular helices accompanied by notable volume shrinkage. These variations in gelation behavior are ascribed to heightened hydrophobic interactions and diminished hydrogen bonding in both systems upon heating, resulting in gelation. These findings provide valuable insights into the microstructural changes during gelation and the thermo-gelation mechanisms of structurally similar polysaccharides.

Effects of heat treatment at different moisture of mung bean flour on the structural, gelation and in vitro digestive properties of starch

Effects of heat treatment (100 °C) at different moisture content (13-70 %) on the structural, gelation and digestive properties of starch in real mung bean flour (MBF) systems are investigated. The results showed that the structural destruction of the starch, the starch-lipid complexion and starch-protein interaction were promoted with increasing moisture content. The starch-protein interaction was mainly driven by hydrophobic interaction forces, leading the increase of total phase transition enthalpy. Even though starch retained ordered structure after heating at 50 %-70 % moisture, the typical pasting curve almost disappeared. The less leached amylose to construct the continuous phase, and more flexible amylopectin swollen granules dispersed in the matrix may weakened the viscoelasticity of the gels. As a result, two distinct gel textures were presented: soft solids with good water-binding capacity (below 30 %) and pasty fluids (above 40 %). Starch-lipid/protein interactions were demonstrated to retard the digestion rate of starch during MBS gelatinization according to the two-stage first-order kinetic and LOS (logarithm of the slope) models.

Gelation behavior and mechanism of low methoxyl pectin in the presence of erythritol and sucrose: The role of co-solutes

Co-solutes such as sucrose and sugar alcohol play a significant part in low methoxyl pectin (LMP) gelation. To explore their gelation mechanism, we investigated the gelation behavior of LMP in the presence of erythritol and sucrose with Ca2+. Results revealed that the introduction of erythritol and sucrose improved the hardness of the gels, fixed more free water, accelerated the rate of gel structuring, and enhanced the gel strength. FT-IR confirmed the reinforced hydrogen bonding and hydrophobic forces between the pectin chains after introducing co-solutes. And it could be observed clearly by SEM that the cross-linking density of gel network enhanced with co-solutes. Furthermore, gel disruption experiments suggested the presence of ionic interaction, hydrogen bonding, and hydrophobic forces in LMP gels. Finally, we concluded that the egg-box regions cross-linked only by LMP and Ca2+ were too weak to form a stable gel network structure. Adding co-solutes could increase the amount of cross-linking between pectin chains and enlarge the cross-linking zones, which favored the formation of a dense gel network by more hydrogen bonding and hydrophobic forces. Sucrose gels had superior physicochemical properties and microstructure than erythritol gels due to sucrose's excellent hydration capacity and chemical structure characteristics.

Threading the needle: Achieving simplicity and performance in cellulose alkanoate ω-carboxyalkanoates for amorphous solid dispersion

Most active pharmaceutical ingredients (APIs) suffer from poor water solubility, often keeping them from reaching patients. To overcome the issues of poor drug solubility and subsequent low bioavailability, amorphous solid dispersions (ASDs) have garnered much attention. Cellulose ester derivatives are of interest for ASD applications as they are benign, sustainable-based, and successful in commercial drug delivery systems, e.g. in osmotic pump systems and as commercial ASD polymers. Synthesis of carboxy-pendant cellulose esters is a challenge, due in part to competing reactions between carboxyls and hydroxyls, forming ester crosslinks. Herein we demonstrate proof-of-concept for a scalable synthetic route to simple, yet highly promising ASD polymers by esterifying cellulose polymers through ring-opening of cyclic succinic or glutaric anhydride. We describe the complexity of such ring-opening reactions, not previously well-described, and report ways to avoid gelation. We report synthesis, characterization, and preliminary in vitro ASD evaluations of fifteen such derivatives. Synthetic routes were designed to accommodate these criteria: no protecting groups, no metal catalysts, mild conditions with standard reagents, simple purification, and one-pot synthesis. Finally, these designed ASD polymers included members that maintained fast-crystallizing felodipine in solution and release it from an ASD at rather high 20 % drug loading (DL).

Rheology and gelation of aqueous carboxymethylated curdlan solution: Impact of the degree of substitution

Curdlan is a unique (1,3)-β-D-glucan with bioactivity and exceptional gelling properties. By chemical functionalization such as carboxymethylation, the physicochemical properties of curdlan can be significantly tailored. However, how the carboxymethylation extent of curdlan affects its rheology and gelation characteristics has yet to be fully understood. Herein, we investigated the impact of the degree of substitution (DS, ranging from 0.04 to 0.97) on the rheological and gelation behavior of carboxymethylated curdlan (CMCD). It was found that CMCD with DS below 0.20, resembling native curdlan, still retained its gelling capability. As the DS increased beyond 0.36, there was a significant increase in its water solubility instead of gelation, resulting in transparent solutions with steady/complex viscosities adhering to the Cox-Merz rule. Moreover, CMCD with high DS demonstrated the ability to undergo in-situ gelation in the presence of metal ions, attributed to the nonspecific electrostatic binding. Additionally, in vitro cytocompatibility testing showed positive compatibility across varying DS in CMCD. This research offers a holistic understanding of the viscosifying and gelling behaviors of CMCD with varying DS, thereby fostering their practical application as thickeners and gelling agents in fields ranging from food and biomedicine to cosmetics and beyond.

Synergistic effects of microbial transglutaminase and apple pectin on the gelation properties of pea protein isolate and its application to probiotic encapsulation

The low gelation capacity of pea protein isolate (PPI) limits their use in food industry. Therefore, microbial transglutaminase (MTG) and apple pectin (AP) were combined to modify PPI to enhance its gelling characteristics, and the mechanism of MTG-induced PPI-AP composite gel generation was investigated. PPI (10 wt%) could not form a gel at 40 °C, while MTG-treated PPI (10 wt%) formed a self-supporting gel at 40 °C. Subsequently, the addition of AP further promoted the crosslinking of PPI and significantly improved the water holding capacity, rheology, and strength of PPI gels, which was attributed to both hydrogen and isopeptide bonds in the composite gel. Additionally, the PPI-AP composite gel showed excellent protection ability, and the survival rate of probiotics could reach over 90%, which could be used as an effective delivery system. This study verified that MTG and AP were efficient in enhancing the functional quality of PPI gels.

Legume milk-based yogurt mimetics structured using glucono-δ-lactone

The potential to produce protein-structured vegan yogurts with legumes was explored to offer an alternative to conventional polysaccharide-based varieties. Glucono-δ-lactone (GDL) was employed as a slow acidifying agent and was investigated for its ability to generate cold-set, yogurt-like gels using soy and lentil milks made using minimal processing steps. Soy (5.3 % protein) and lentil (6.1 % protein) milks were successfully gelled by GDL at concentrations of 0.5 % and 1 % w/w. Soy and lentil milks experienced similar acidification profiles and demonstrated good fits with double-exponential decay models. The physical properties of these legume gels were evaluated and compared to a commercial stirred dairy yogurt. Penetration tests were carried out on intact gels, then repeated after stirring. All intact soy samples demonstrated significantly stronger gel structures compared to the commercial yogurt, and most experienced greater amounts of brittleness. Results showed that the stirring of gels caused a notable decrease in firmness and brittleness in the soy gels, making them more similar to the control. Power-law modelling of viscosity curves demonstrated that all samples experienced non-Newtonian flow behavior (n < 0.29). Susceptibility to syneresis was measured by the degree of liquid loss following centrifugation. The optimization of protein type and GDL concentration to replicate the physical properties of dairy-based yogurts can enhance their consumer acceptance and provide a more customizable and controlled approach alternative to traditional fermentation methods.

Changes in the pasting and rheological properties of wheat, corn, water caltrop and lotus rhizome starches by the addition of Annona montana mucilage

Annona montana mucilage (AMM) is a novel mucilage with unique but limited information. This study investigated the effects of AMM addition on the pasting and rheological properties of wheat starch (WS), corn starch (CS), water caltrop starch (WCS), and lotus rhizome starch (LRS). The addition of AMM generally increased the pasting temperature and peak viscosity, but reduced the setback value of all starches to varying degrees, and the initiation of viscosity-increase for cereal starch/AMM systems during pasting occurred at lower temperatures, accompanied with a distinctive two-stage swelling process as well as lower peak and final hot paste viscosity at 50 °C. AMM significantly increased the pseudoplasticity and entanglement of the systems to varying degrees (LRS > WS > WCS > CS). Under a constant shear rate of 50 s-1, the consistency level was found to fall in honey-like for cereal starch/AMM groups, and honey-like to extremely thick levels for WCS and LRS/AMM groups. Except for the WCS/AMM systems, the storage and loss modulus as well as tan increased with increasing AMM concentration. Short-term retrogradation of starch at 4 °C was pronouncedly retarded by the addition of AMM for WS, CS and WCS groups, but was less affected for LRS group.

Modulating the texture of heat-set gels of phosphorylated walnut protein isolates through Glucono-δ-lactone acidification

The gelation of walnut protein isolates has not been extensively studied, mainly due to their inherent poor dispersity. This study investigated the gelation of alkaline-extracted walnut protein isolates (AWPI) and phosphorylated walnut protein isolates (PWPI) induced by heat treatment with glucono-δ-lactone (GDL) acidification, focusing on the impact of GDL concentrations on microstructure, rheology, and texture of the resulting gels. The PWPI gel exhibited lower hardness but a smoother structure than the AWPI gel. Notably, acidification with GDL (0.6-1.2%) significantly increased the stiffness of PWPI gels, increasing storage modulus and yield stress 10-50 times, while weakening AWPI gels. Varying concentrations of GDL effectively modulated the microstructure of the PWPI gels, leading to the altered texture (from a soft-solid state to a well-self-supporting stiff-solid gel) and water holding capacity (from approximately 46% to 85%). Additionally, hydrophobic interactions and disulfide bonds were identified as the primary forces involved in the gels.

Exploring xylitol as a low-salt alternative for effective inhibition of gelation in frozen egg yolks

Xylitol and NaCl were studied as alternative inhibitors of gelation in frozen egg yolks, considering the current dietary preference for low salt and low sucrose intake. The effects of different ratios of xylitol and NaCl on gelation were investigated. Compared to the control group, all treatment groups showed decreased egg yolk particle size and turbidity, increased solubility, surface hydrophobicity, λmax, and fluorescence intensity, reduced loss of free water, and enhanced yolk fluidity. The addition of xylitol and NaCl effectively prevented ice crystal growth, minimized protein denaturation caused by water loss, and formed complexes with proteins and water lost during freezing, thereby inhibiting the aggregation of protein molecules and the formation of gels. This study presents a novel and healthier strategy for inhibiting gelation of frozen egg yolk using xylitol and NaCl.

Phase transition and gelation in cellulose nanocrystal-based aqueous suspensions studied by SANS

HYPOTHESIS

Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale.

EXPERIMENTS

By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH.

FINDINGS

Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids.