Structure, location, and lipid perturbations of melittin at the membrane interface

Melittin is arguably the most widely studied amphipathic, membrane-lytic alpha-helical peptide. Although several lines of evidence suggest an interfacial membrane location at low concentrations, melittin's exact position and depth of penetration into the hydrocarbon core are unknown. Furthermore, the structural basis for its lytic action remains largely a matter of conjecture. Using a novel x-ray absolute-scale refinement method, we have now determined the location, orientation, and likely conformation of monomeric melittin in oriented phosphocholine lipid multilayers. Its helical axis is aligned parallel to the bilayer plane at the depth of the glycerol groups, but its average conformation differs from the crystallographic structure. As observed earlier for another amphipathic alpha-helical peptide, the lipid perturbations induced by melittin are remarkably modest. Small bilayer perturbations thus appear to be a general feature of amphipathic helices at low concentrations. In contrast, a dimeric form of melittin causes larger structural perturbations under otherwise identical conditions. These results provide direct structural evidence that self-association of amphipathic helices may be the crucial initial step toward membrane lysis.

The lipid charge density at the bilayer surface modulates the effects of melittin on membranes

The influence of melittin on two DMPA membrane systems at pH 4.2 and 8.2 has been investigated by solid-state 31P and 2H NMR, as a function of temperature and peptide concentration. Melittin promotes greater morphological changes for both systems in the fluid phase, the effect being larger at pH 4.2. Close inspection of fatty acyl chain dynamics suggests that some parallels can be drawn between the DMPA/melittin at pH 8.2 and PC/melittin systems. In addition, at pH 8.2 a direct neutralization at the interface of one of the lipid negative charges by a positive charge of the peptide occurs, as can be monitored by 31P NMR at the molecular level. For the system at pH 4.2 and at high temperature, a lipid-to-peptide molar ratio of 30 is sufficient to transform the whole system into an isotropic phase, proposed to be inverted micelles. When the system is cooled down towards the gel phase one observes an intermediate hexagonal phase in a narrow range of temperature.

Pressure-dependent changes in the structure of the melittin alpha-helix determined by NMR

A novel method is described, which uses changes in NMR chemical shifts to characterise the structural change in a protein with pressure. Melittin in methanol is a small alpha-helical protein, and its chemical shifts change linearly and reversibly with pressure between 1 and 2000 bar. An improved relationship between structure and HN shift has been calculated, and used to drive a molecular dynamics-based calculation of the change in structure. With pressure, the helix is compressed, with the H-O distance of the NH-O=C hydrogen bonds decreased by 0.021 +/- 0.039 A, leading to an overall compression along the entire helix of about 0.4 A, corresponding to a static compressibility of 6 x 10(-6) bar(-1). The backbone dihedral angles phi and psi are altered by no more than +/- 3 degrees for most residues with a negative correlation coefficient of -0.85 between phi(i) and psi(i - 1), indicating that the local conformation alters to maintain hydrogen bonds in good geometries. The method is shown to be capable of calculating structural change with high precision, and the results agree with structural changes determined using other methodologies.

Targeted destruction of androgen-sensitive and -insensitive prostate cancer cells and xenografts through luteinizing hormone receptors

BACKGROUND

We have prepared a conjugate of a lytic peptide (hecate) and a 15-amino acid segment of the beta-chain of LH to test the concept that this conjugate will target cancer cells expressing LH receptors.

METHODS

Hecate-betaLH was added in vitro to cultures of Chinese hamster ovary (CHO) cells with and without LH receptors and to prostate cancer cells in the presence or absence of steroids, follicle-stimulating hormone (FSH), epidermal growth factor (EGF), or betaLH. PC-3 xenografts were established in male athymic nude mice and treated once a week for 3 weeks with hecate-betaLH via the lateral tail vein.

RESULTS

The conjugate showed concentration-dependent toxicity for the following prostate cancer cell lines: BRF 41 T>DU145>PC-3>LNCaP, according to their LH receptor capacities. Steroid removal reduced sensitivity to the drug in a reversible manner. Hecate-betaLH reduced the tumor burden in the nude mice from 60 to 12.5 mg/g body weight.

CONCLUSIONS

We conclude that the hecate-betaLH conjugate selectively kills androgen-dependent and-independent prostate cancer cells both in vivo and in vitro; its toxicity depends on the number of LH receptor sites present.

Paramecium calmodulin mutants defective in ion channel regulation associate with melittin in the absence of calcium but require it for tertiary collapse

Calmodulin (CaM) is a small acidic protein essential to calcium-mediated signal transduction. Conformational change driven by calcium binding controls its selective activation of myriad target proteins. In most well characterized cases, both homologous domains of CaM interact with a target protein. However, physiologically separable roles for the two domains were demonstrated by mutants of Paramecium tetraurelia [Kung, C. et al. (1992) Cell Calcium 13, 413], some of which have altered calcium affinities [Jaren, O. R. et al. (2000) Biochemistry 39, 6881]. To determine whether these mutants can associate with canonical targets in a calcium-dependent manner, their ability to bind melittin was assessed using analytical gel permeation chromatography, analytical ultracentrifugation, and fluorescence spectroscopy. The Stokes radius of wild-type PCaM and 11 of the mutants decreased dramatically upon binding melittin in the presence of calcium. Fluorescence spectra and sedimentation velocity studies showed that melittin bound to wild-type PCaM and mutants in a calcium-independent manner. However, there were domain-specific perturbations. Mutations in the N-domain of PCaM did not affect the spectrum of melittin (residue W19) under apo or calcium-saturated conditions, whereas most of the mutations in the C-domain did. These data are consistent with a calcium-dependent model of sequential target association whereby melittin (i) binds to the C-domain of PCaM in the absence of calcium, (ii) remains associated with the C-domain upon calcium binding to sites III and IV, and (iii) subsequently binds to the N-domain upon calcium binding to sites I and II of CaM, causing tertiary collapse.

Membrane molecule reorientation in an electric field recorded by attenuated total reflection Fourier-transform infrared spectroscopy

Electric fields play an important role in the physiological function of macromolecules. Much is known about the role that electric fields play in biological systems, but membrane molecule structure and orientation induced by electric fields remain essentially unknown. In this paper, we present a polarized attenuated total reflection (ATR) experiment we designed to study the effect of electric fields on membrane molecule structure and orientation by Fourier-transform infrared (FTIR) spectroscopy. Two germanium crystals used as the internal reflection element for ATR-FTIR experiments were coated with a thin layer of polystyrene as insulator and used as electrodes to apply an electric field on an oriented stack of membranes made of dioleylphosphatidylcholine (DOPC) and melittin. This experimental set up allowed us for the first time to show fully reversible orientational changes in the lipid headgroups specifically induced by the electric potential difference.

Peptide-membrane interactions studied by a new phospholipid/polydiacetylene colorimetric vesicle assay

Interactions between peptides and lipid membranes play major roles in numerous physiological processes, such as signaling, cytolysis, formation of ion channels, and cellular recognition. We describe a new colorimetric technique for studying peptide-membrane interactions. The new assay is based on supramolecular assemblies composed of phospholipids embedded in a matrix of polydiacetylene (PDA) molecules. The phospholipid/PDA vesicle solutions undergo visible color changes upon binding of membrane peptides. Experiments utilizing various analytical techniques confirm that the blue-to-red color transitions of the phospholipid/PDA vesicles are directly related to adoption of helical conformations by the peptides and their association with the lipids. Spectroscopic data indicate that the colorimetric transitions are correlated with important molecular parameters, such as the degree of penetration of the peptides into lipid bilayers, and the mechanisms of peptide-lipid binding. The results suggest that the new colorimetric assay could be utilized for studying interactions and organization of membrane peptides.

Effect of the antimicrobial peptide, D-hecate, on trichomonads

Tritrichomonas foetus and Trichomonas vaginalis are protozoan parasites that cause sexually transmitted diseases in cattle and humans, respectively. There is a need for new antimicrobial agents to treat or prevent trichomoniasis because there are currently no approved chemotherapeutic agents against T. foetus and resistance of T. vaginalis to metronidazole does occur. Therefore, we evaluated the effect of a novel antimicrobial peptide, D-hecate, on the viability of 6 isolates of T. foetus and T. vaginalis in vitro. Tritrichomonas foetus and T. vaginalis were grown to mid log phase (24 hr) or late log/stationary phase (48 hr). Parasites at 10(6)/ml were mixed with equal volumes of D-hecate to final concentrations of 10 microM, 20 microM. and 40 microM of D-hecate. Controls had minimal essential medium (MEM) alone. The numbers of viable parasites were determined microscopically after 10, 20, and 30 min of incubation at 37 C with D-hecate or MEM. Our results show that D-hecate killed all 6 isolates of T. foetus and T. vaginalis evaluated. The killing effect was dependent on the concentration of the peptide, incubation time, and phase of growth of the parasites. Ultrastructural studies of parasites treated with 10 microM of D-hecate revealed extensive damage to the plasma membrane of most T. foetus and T. vaginalis cells, while a few cells were distorted but remained intact. D-Hecate may be a useful chemotherapeutic agent for the treatment of trichomoniasis.

Orientation of membrane-bound melittin studied by a combination of HPLC and liquid secondary ion mass spectrometry (LSIMS)

Combining two analytical techniques, HPLC and liquid secondary ion mass spectrometry, the orientation of liposomal membrane-bound melittin was analyzed through its trypsin-digested products. We found that trypsin can access all proteolytic sites of the membrane-bound melittin when the liposomes have no transmembrane potential, whereas the proteolytic site near the N terminus of melittin is blocked when the liposomes have a negative transmembrane potential. The results suggest that the negative transmembrane potential may induce the melittin molecules to insert into the membrane perpendicularly, whereas melittin lies flat on the membrane surface in the absence of a negative potential.

Conformational studies of a melittin-inhibitor complex

The conformation of a melittin-inhibitor complex was studied by solution NMR, solid-state NMR, and circular dichroism. In solution, binding was studied by titrating inhibitor against melittin in dimethyl sulfoxide, methanol, aqueous buffer, and dodecylphosphocholine micelles. The change in chemical shift of Trp19 resonances and the formation of a precipitate at 1:1 molar ratio indicated that the inhibitor was bound to melittin. Solid-state NMR also showed a change in chemical shift of two labeled carbons of melittin near Pro14 and a change in 1HT1 relaxation times when complexed with inhibitor. Rotational resonance experiments of melittin labeled in the proline region indicated a change in conformation for melittin complexed with inhibitor. This observation was also supported by circular dichroism measurements, indicating a reduction in alpha-helical structure for increasing ratios of inhibitor bound to melittin.

Conformation and dynamics of melittin bound to magnetically oriented lipid bilayers by solid-state (31)P and (13)C NMR spectroscopy

The conformation and dynamics of melittin bound to the dimyristoylphosphatidylcholine (DMPC) bilayer and the magnetic orientation in the lipid bilayer systems were investigated by solid-state (31)P and (13)C NMR spectroscopy. Using (31)P NMR, it was found that melittin-lipid bilayers form magnetically oriented elongated vesicles with the long axis parallel to the magnetic field above the liquid crystalline-gel phase transition temperature (T(m) = 24 degrees C). The conformation, orientation, and dynamics of melittin bound to the membrane were further determined by using this magnetically oriented lipid bilayer system. For this purpose, the (13)C NMR spectra of site-specifically (13)C-labeled melittin bound to the membrane in the static, fast magic angle spinning (MAS) and slow MAS conditions were measured. Subsequently, we analyzed the (13)C chemical shift tensors of carbonyl carbons in the peptide backbone under the conditions where they form an alpha-helix and reorient rapidly about the average helical axis. Finally, it was found that melittin adopts a transmembrane alpha-helix whose average axis is parallel to the bilayer normal. The kink angle between the N- and C-terminal helical rods of melittin in the lipid bilayer is approximately 140 degrees or approximately 160 degrees, which is larger than the value of 120 degrees determined by x-ray diffraction studies. Pore formation was clearly observed below the T(m) in the initial stage of lysis by microscope. This is considered to be caused by the association of melittin molecules in the lipid bilayer.

Stability of a melittin pore in a lipid bilayer: a molecular dynamics study

We have investigated the configuration and the stability of a single membrane pore bound by four melittin molecules and embedded in a fully hydrated bilayer lipid membrane. We used molecular dynamics simulations up to 5.8 ns. It is found that the initial tetrameric configuration decays with increasing time into a stable trimer and one monomer. This continuous transformation is accompanied by a lateral expansion of the aqueous pore exhibiting a final size comparable to experimental findings. The expansion-induced formation of an interface between the pore-lining acyl chains of the lipids and the pore water ("hydrophobic pore") is transformed into an energetically more favorable toroidal pore structure where some lipid heads are translocated from the rim to the central part of the interface ("hydrophilic pore"). The expansion of the pore is supported by the electrostatic repulsion among the alpha-helices. It is hypothesized that pore growth, and hence cell lysis, is induced by a melittin-mediated line tension of the pore.

Membrane-induced conformational change of proteins

Many proteins exhibit both a water-soluble and a membrane-bound state. The proteins in the membrane-bound state obtain a distinct structure from that in the bulk, which exists in many important biological processes. In the present paper we would stress that the variation of the physical chemistry properties of the microenvironment adjacent to the membrane-surface region play an important role in the process of the membrane-induced conformational changes of the proteins.

Protein-induced membrane disorder: a molecular dynamics study of melittin in a dipalmitoylphosphatidylcholine bilayer

A molecular dynamics simulation of melittin in a hydrated dipalmitoylphosphatidylcholine (DPPC) bilayer was performed. The 19, 000-atom system included a 72-DPPC phospholipid bilayer, a 26-amino acid peptide, and more than 3000 water molecules. The N-terminus of the peptide was protonated and embedded in the membrane in a transbilayer orientation perpendicular to the surface. The simulation results show that the peptide affects the lower (intracellular) layer of the bilayer more strongly than the upper (extracellular) layer. The simulation results can be interpreted as indicating an increased level of disorder and structural deformation for lower-layer phospholipids in the immediate vicinity of the peptide. This conclusion is supported by the calculated deuterium order parameters, the observed deformation at the intracellular interface, and an increase in fractional free volume. The upper layer was less affected by the embedded peptide, except for an acquired tilt relative to the bilayer normal. The effect of melittin on the surrounding membrane is localized to its immediate vicinity, and its asymmetry with respect to the two layers may result from the fact that it is not fully transmembranal. Melittin's hydrophilic C-terminus anchors it at the extracellular interface, leaving the N-terminus "loose" in the lower layer of the membrane. In general, the simulation supports a role for local deformation and water penetration in melittin-induced lysis. As for the peptide, like other membrane-embedded polypeptides, melittin adopts a significant 25 degree tilt relative to the membrane normal. This tilt is correlated with a comparable tilt of the lipids in the upper membrane layer. The peptide itself retains an overall helical structure throughout the simulation (with the exception of the three N-terminal residues), adopting a 30 degree intrahelical bend angle.

Mechanistic studies of multipole storage assisted dissociation

The degree and onset of fragmentation in multipole storage assisted dissociation (MSAD) have been investigated as functions of several hexapole parameters. Strict studies of hexapole charge density (number of ions injected) and hexapole storage time were made possible by placing a pulsed shutter in front of the entrance to the mass spectrometer. The results obtained show that the charge density is the most critical parameter, but also dependencies on storage time, radio-frequency (rf) -amplitude, and pressure are seen. From these data, and from simulations of the ion trajectories inside the hexapole, a mechanism for MSAD, similar to the ones for sustained off-resonance irradiation (SORI), and for low energy collisionally induced dissociation in the collision multipole of a triple quadrupole mass spectrometer, is proposed. It is believed that, at higher charge densities, ions are pushed to larger hexapole radii where the electric potential created by the rf field is higher, forcing the ions to oscillate radially to higher amplitudes and thereby reach higher (but still relatively low) kinetic energies. Multiple collisions with residual gas molecules at these elevated energies then heat up the molecules to their dissociation threshold. Further support for this mechanism is obtained from a comparison of MSAD and SORI spectra which are almost identical in appearance.

Synthesis and characterization of a peptide identified as a functional element in alphaA-crystallin

Eye lens alpha-crystallin is a member of the small heat shock protein (sHSP) family and forms large multimeric structures. Earlier studies have shown that it can act like a molecular chaperone and form a stable complex with partially unfolded proteins. We have observed that prior binding of the hydrophobic protein melittin to alpha-crystallin diminishes its chaperone-like activity toward denaturing alcohol dehydrogenase, suggesting the presence of mutually exclusive sites for these proteins in alpha-crystallin. To investigate the mechanism of the interaction between alpha-crystallin and substrate proteins, we determined the melittin-binding sites in alpha-crystallin by cross-linking studies. Localization of melittin-binding sites in alpha-crystallin resulted in the identification of RTLGPFYPSR and FVIFLDVKHFSPEDLTVK of alphaA-crystallin and FSVNLDVK of alphaB-crystallin as the chaperone sites. Of these sites, FVIFLDVKHFSPEDLTVK and FSVNLDVK were identified earlier as 1,1'-bi(4-anilino) naphthalene-5,5'-disulfonic acid (bis-ANS)-binding hydrophobic sites. Here we also report the synthesis and characterization of the peptide, KFVIFLDVKHFSPEDLTVK, having the melittin as well as bis-ANS-binding sequence of alphaA-crystallin. We show that this peptide has characteristics similar to that of alphaA-crystallin by in vitro thermal aggregation assay, gel filtration study, CD spectroscopy, and bis-ANS interaction studies. The peptide sequence corresponds to the beta3 and beta4 region present in the alpha-crystallin domain of sHSP 16.5. We hypothesize that the alpha-crystallin domain in other sHSPs may have a similar function and would likely possess the anti-aggregation property even when separated from the native protein.

An enzyme-release assay for the assessment of the lytic activities of complement or antimicrobial peptides on extracellular Toxoplasma gondii

A method is described which allows the evaluation of the membrane lytic activity of either complement or antimicrobial peptides against the extracellular stage of the human protozoan parasite Toxoplasma gondii. The assay is based on lacZ transgenic parasites, determining the activity of released cytoplasmic beta-galactosidase into the culture supernatant upon membrane disintegration. This method was used to evaluate the lytic activities of (i) complement which is a natural defense mechanism in infected hosts against extracellular parasites, and (ii) antimicrobial peptides which have not been evaluated against T. gondii before. The results show that the assay provides a simple and convenient way to assess the membrane lytic activity of such compounds and that T. gondii, like other protozoan parasites, is vulnerable to the membrane-lytic effect of antimicrobial peptides.

Determining the membrane topology of peptides by fluorescence quenching

Determination of the topology of peptides in membranes is important for characterizing and understanding the interactions of peptides with membranes. We describe a method that uses fluorescence quenching arising from resonance energy transfer ("FRET") for determining the topology of the tryptophan residues of peptides partitioned into phospholipid bilayer vesicles. This is accomplished through the use of a novel lyso-phospholipid quencher (lysoMC), N-(7-hydroxyl-4-methylcoumarin-3-acetyl)-1-palmitoyl-2-hydroxy-sn-gly cero-3-phosphoethanolamine. The design principle was to anchor the methylcoumarin quencher in the membrane interface by attaching it to the headgroup of lyso-phosphoethanolamine. We show that lysoMC can be incorporated readily into large unilamellar phospholipid vesicles to yield either symmetrically (both leaflets) or asymmetrically (outer leaflet only) labeled bilayers. LysoMC quenches the fluorescence of membrane-bound tryptophan by the Förster mechanism with an apparent R(0) that is comparable to the thickness of the hydrocarbon core of a lipid bilayer (approximately 25 A). Consequently, the methylcoumarin acceptor predominantly quenches tryptophans that reside in the same monolayer as the probe. The topology of a peptide's tryptophan in membranes can be determined by comparing the quenching in symmetric and asymmetric lysoMC-labeled vesicles. Because it is essential to know that asymmetrically incorporated lysoMC remains so under all conditions, we also developed a second type of FRET experiment for assessing the rate of transbilayer diffusion (flip-flop) of lysoMC. Except in the presence of pore-forming peptides, there was no measurable flip-flop of lysoMC, indicating that asymmetric distributions of quencher are stable. We used these methods to show that N-acetyl-tryptophan-octylamide and tryptophan-octylester rapidly equilibrate across phosphatidylcholine (POPC) and phosphatidylglycerol (POPG) bilayers, while four amphipathic model peptides remain exclusively on the outer monolayer. The topology of the amphipathic peptide melittin bound to POPC could not be determined because it induced rapid flip-flop of lysoMC. Interestingly, melittin did not induce lysoMC flip-flop in POPG vesicles and was found to remain stably on the external monolayer.

Tryptophan fluorescence of calmodulin binding domain peptides interacting with calmodulin containing unnatural methionine analogues

The interactions between the abundant methionine residues of the calcium regulatory protein calmodulin (CaM) and several of its binding targets were probed using fluorescence spectroscopy. Tryptophan steady-state fluorescence from peptides encompassing the CaM-binding domains of the target proteins myosin light chain kinase (MLCK), cyclic nucleotide phosphodiesterase (PDE) and caldesmon site A and B (CaD A, CaD B), and the model peptide melittin showed Ca(2+)-dependent blue-shifts in their maximum emission wavelength when complexed with wild-type CaM. Blue-shifts were also observed for complexes in which the CaM methionine residues were replaced by selenomethionine, norleucine and ethionine, and when a quadruple methionine to leucine C-terminal mutant of CaM was studied. Quenching of the tryptophan fluorescence intensity was observed with selenomethionine, but not with norleucine or ethionine substituted protein. Fluorescence quenching studies with added potassium iodide (KI) demonstrate that the non-native proteins limit the solvent accessibility of the Trp in the MLCK peptide to levels close to that of the wild-type CaM-MLCK interaction. Our results show that the methionine residues from CaM are highly sensitive to the target peptide in question, confirming the importance of their role in binding interactions. In addition, we provide evidence that the nature of binding in the CaM-CaD B complex is unique compared with the other complexes studied, as the Trp residue of this peptide remains partially solvent exposed upon binding to CaM.

Molecular interactions of peptides with phospholipid vesicle membranes as studied by fluorescence correlation spectroscopy

Interactions of the peptides melittin and magainin with phospholipid vesicle membranes have been studied using fluorescence correlation spectroscopy. Molecular interactions of melittin and magainin with phospholipid membranes are performed in rhodamine-entrapped vesicles (REV) and in rhodamine-labelled phospholipid vesicles (RLV), which did not entrap free rhodamine inside. The results demonstrate that melittin makes channels into vesicle membranes since exposure of melittin to vesicles causes rhodamine release only from REV but not from RLV. It is obvious that rhodamine can not be released from RLV because the inside of RLV is free of dye molecules. In contrast, magainin breaks vesicles since addition of magainin to vesicles results in rhodamine release from both REV and RLV. As the inside of RLV is free of rhodamine, the appearance of rhodamine in solution confirms that these vesicles are broken into rhodamine-labelled phospholipid fragments after addition of magainin. This study is of pharmaceutical significance since it will provide insights that fluorescence correlation spectroscopy can be used as a rapid protocol to test incorporation and release of drugs by vesicles.

The structure, dynamics and orientation of antimicrobial peptides in membranes by multidimensional solid-state NMR spectroscopy

Linear peptide antibiotics have been isolated from amphibians, insects and humans and used as templates to design cheaper and more potent analogues for medical applications. Peptides such as cecropins or magainins are < or = 40 amino acids in length. Many of them have been prepared by solid-phase peptide synthesis with isotopic labels incorporated at selected sites. Structural analysis by solid-state NMR spectroscopy and other biophysical techniques indicates that these peptide antibiotics strongly interact with lipid membranes. In bilayer environments they exhibit amphipathic alpha-helical conformations and alignments of the helix axis parallel to the membrane surface. This contrasts the transmembrane orientations observed for alamethicin or gramicidin A. Models that have been proposed to explain the antibiotic and pore-forming activities of membrane-associated peptides, as well as other experimental results, include transmembrane helical bundles, wormholes, carpets, detergent-like effects or the in-plane diffusion of peptide-induced bilayer instabilities.

Structural features of helical antimicrobial peptides: their potential to modulate activity on model membranes and biological cells

Antibacterial, membrane-lytic peptides belong to the innate immune system and host defense mechanism of a multitude of animals and plants. The largest group of peptide antibiotics comprises peptides which fold into an amphipathic alpha-helical conformation when interacting with the target. The activity of these peptides is thought to be determined by global structural parameters rather than by the specific amino acid sequence. This review is concerned with the influence of structural parameters, such as peptide helicity, hydrophobicity, hydrophobic moment, peptide charge and the size of the hydrophobic/hydrophilic domain, on membrane activity and selectivity. The potential of these parameters to increase the antibacterial activity and to improve the prokaryotic selectivity of natural and model peptides is assessed. Furthermore, biophysical studies are summarized which elucidated the molecular basis for activity and selectivity modulations on the level of model membranes. Finally, the knowledge about the role of peptide structural parameters is applied to understand the different activity spectra of natural membrane-lytic peptides.

Interaction of antimicrobial peptides with biological and model membranes: structural and charge requirements for activity

Species right across the evolutionary scale from insects to mammals use peptides as part of their host-defense system to counter microbial infection. The primary structures of a large number of these host-defense peptides have been determined. While there is no primary structure homology, the peptides are characterized by a preponderance of cationic and hydrophobic amino acids. The secondary structures of many of the host-defense peptides have been determined by a variety of techniques. The acyclic peptides tend to adopt helical conformation, especially in media of low dielectric constant, whereas peptides with more than one disulfide bridge adopt beta-structures. Detailed investigations have indicated that a majority of these host-defense peptides exert their action by permeabilizing microbial membranes. In this review, we discuss structural and charge requirements for the interaction of endogenous antimicrobial peptides and short peptides that have been derived from them, with membranes.

Simulation studies of the interaction of antimicrobial peptides and lipid bilayers

Experimental studies of a number of antimicrobial peptides are sufficiently detailed to allow computer simulations to make a significant contribution to understanding their mechanisms of action at an atomic level. In this review we focus on simulation studies of alamethicin, melittin, dermaseptin and related antimicrobial, membrane-active peptides. All of these peptides form amphipathic alpha-helices. Simulations allow us to explore the interactions of such peptides with lipid bilayers, and to understand the effects of such interactions on the conformational dynamics of the peptides. Mean field methods employ an empirical energy function, such as a simple hydrophobicity potential, to provide an approximation to the membrane. Mean field approaches allow us to predict the optimal orientation of a peptide helix relative to a bilayer. Molecular dynamics simulations that include an atomistic model of the bilayer and surrounding solvent provide a more detailed insight into peptide-bilayer interactions. In the case of alamethicin, all-atom simulations have allowed us to explore several steps along the route from binding to the membrane surface to formation of transbilayer ion channels. For those antimicrobial peptides such as dermaseptin which prefer to remain at the surface of a bilayer, molecular dynamics simulations allow us to explore the favourable interactions between the peptide helix sidechains and the phospholipid headgroups.

The monolayer technique: a potent tool for studying the interfacial properties of antimicrobial and membrane-lytic peptides and their interactions with lipid membranes

Erudites of the antiquity already knew the calming effect of oil films on the sea waves. But one had to wait until 1774 to read the first scientific report on oil films from B. Franklin and again 1878 to learn the thermodynamic analysis on adsorption developed by J. Gibbs. Then, in 1891, Agnes Pockels described a technique to manipulate oil films by using barriers. Finally, in 1917, I. Langmuir introduced the experimental and theoretical modern concepts on insoluble monolayers. Since that time, and because it has been found to provide invaluable information at the molecular scale, the monolayer technique has been more and more extensively used, and, during the past decade, an explosive increase in the number of publications has occurred. Over the same period, considerable and ever-increasing interest in the antimicrobial peptides of various plants, bacteria, insects, amphibians and mammals has grown. Because many of these antimicrobial peptides act at the cell membrane level, the monolayer technique is entirely suitable for studying their physicochemical and biological properties. This review describes monolayer experiments performed with some of these antimicrobial peptides, especially gramicidin A, melittin, cardiotoxins and defensin A. After giving a few basic notions of surface chemistry, the surface-active properties of these peptides and their behavior when they are arranged in monomolecular films are reported and discussed in relation to their tridimensional structure and their amphipathic character. The penetration of these antimicrobial peptides into phospholipid monolayer model membranes, as well as their interactions with lipids in mixed films, are also emphasized.