A pH/ROS-responsive antioxidative and antimicrobial GelMA hydrogel for on-demand drug delivery and enhanced osteogenic differentiation in vitro

Long-term inflammation, including those induced by bacterial infections, contributes to the superfluous accumulation of reactive oxygen species (ROS), further aggravating this condition, decreasing the local pH, and adversely affecting bone defect healing. Conventional drug delivery scaffold materials struggle to meet the demands of this complex and dynamic microenvironment. In this work, a smart gelatin methacryloyl (GelMA) hydrogel was synthesized for the dual delivery of proanthocyanidin and amikacin based on the unique pH and ROS responsiveness of boronate complexes. Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the co-crosslinking of two boronate complexes with GelMA. The addition of the boronate complexes improved the mechanical properties, swelling ratio, degradation kinetics and antioxidative properties of the hydrogel. The hydrogel exhibited pH and ROS responses and a synergistic control over the drug release. Proanthocyanidin was responsively released to protect mouse osteoblast precursor cells from oxidative stress and promote their osteogenic differentiation. The hydrogel responded to pH changes and released sufficient amikacin in a timely manner, thereby exerting an efficient antimicrobial effect. Overall, the hydrogel delivery system exhibited a promising strategy for solving infectious and inflammatory problems in bone defects and promoting early-stage bone healing.

Catalase-templated nanozyme-loaded microneedles integrated with polymyxin B for immunoregulation and antibacterial activity in diabetic wounds

Diabetic wounds are characterized by chronic trauma, with long-term non-healing attributed to persistent inflammation and recurrent bacterial infections. Exacerbation of the inflammatory response is largely due to increased levels of reactive oxygen species (ROS). In this study, catalase (CAT) was used as a biological template to synthesize nanozyme-supported natural enzymes (CAT-Mn(SH)x) using a biomimetic mineralization method. Subsequently, polymyxin B (CAT-Mn(SH)x@PMB) was immobilized on its surface through electrostatic assembly. CAT-Mn(SH)x@PMB demonstrates the ability for slow and sustained release of hydrogen sulfide (H2S). Finally, CAT-Mn(SH)x@PMB loaded microneedles (MNs) substrate were synthesized using polyvinyl alcohol (PVA) and hydroxyethyl methacrylate (HEMA), and named CAT-(MnSH)x@PMB-MNs. It exhibited enhanced enzyme and antioxidant activities, along with effective antibacterial properties. Validation findings indicate that it can up-regulate the level of M2 macrophages and reduce the level of pro-inflammatory cytokine tumor necrosis factor-α (TNF-α). Additionally, it promotes angiogenesis and rapid nerve regeneration, thereby facilitating wound healing through its dual anti-inflammatory and antibacterial effects. Hence,this study introduces a time-space tissue-penetrating and soluble microneedle patch with dual anti-inflammatory and antibacterial effects for the treatment of diabetic wounds.

3D-printed piezocatalytic hydrogels for effective antibacterial treatment of infected wounds

Bacterial-infected wound repair has become a significant public health concern. This study developed a novel 3D-printed piezocatalytic SF-MA/PEGDA/Ag@BT (SPAB) hydrogels were fabricated by using digital light processing. These hydrogels exhibited high consistency, mechanical properties and good biocompatibility. Besides, the SPAB hydrogels exhibited excellent piezocatalytic performance and thus could induce piezoelectric polarization under ultrasound to generate reactive oxygen species (ROS). The SPAB hydrogels possessed an antibacterial rate of 99.23 % and 99.96 % for Escherichia coli and Staphylococcus aureus, respectively, under 5 min of ultrasonic stimulation (US) in vitro. The US-triggered piezocatalytic performance could increase antibacterial activity and improve the healing process of the infected wound. Therefore, the 3D printed piezocatalytic SPAB hydrogels could be unutilized as wound dressing in the field of bacterial-infected wound repair.

In silico exploration of phenolics as modulators of penicillin binding protein (PBP) 2× of Streptococcus pneumoniae

Infections caused by multidrug-resistant Streptococcus pneumoniae remain the leading cause of pneumonia-related deaths in children < 5 years globally, and mutations in penicillin-binding protein (PBP) 2 × have been identified as the major cause of resistance in the organism to beta-lactams. Thus, the development of new modulators with enhanced binding of PBP2x is highly encouraged. In this study, phenolics, due to their reported antibacterial activities, were screened against the active site of PBP2x using structure-based pharmacophore and molecular docking techniques, and the ability of the top-hit phenolics to inhibit the active and allosteric sites of PBP2x was refined through 120 ns molecular dynamic simulation. Except for gallocatechin gallate and lysidicichin, respectively, at the active and allosteric sites of PBP2x, the top-hit phenolics had higher negative binding free energy (ΔGbind) than amoxicillin [active site (- 19.23 kcal/mol), allosteric site (- 33.75 kcal/mol)]. Although silicristin had the best broad-spectrum effects at the active (- 38.41 kcal/mol) and allosteric (- 50.54 kcal/mol) sites of PBP2x, the high thermodynamic entropy (4.90 Å) of the resulting complex might suggest the need for its possible structural refinement for enhanced potency. Interestingly, silicristin had a predicted synthetic feasibility score of < 5 and quantum calculations using the DFT B3LYP/6-31G+ (dp) revealed that silicristin is less stable and more reactive than amoxicillin. These findings point to the possible benefits of the top-hit phenolics, and most especially silicristin, in the direct and synergistic treatment of infections caused by S. pneumoniae. Accordingly, silicristin is currently the subject of further confirmatory in vitro research.

Galectin-8-like isoform X1 mediates antibacterial, antiviral, and antioxidant responses in red-lip mullet (Planiliza haematocheilus) through positive modulation of pro-inflammatory cytokine, chemokine, and enzymatic antioxidant activity

Galectin 8 belongs to the tandem repeat subclass of the galectin superfamily. It possesses two homologous carbohydrate recognition domains linked by a short peptide and preferentially binds to β-galactoside-containing glycol-conjugates in a calcium-independent manner. This study identified Galectin-8-like isoform X1 (PhGal8X1) from red-lip mullet (Planiliza haematocheilus) and investigated its role in regulating fish immunity. The open reading frame of PhGal8X1 was 918bp, encoding a soluble protein of 305 amino acids. The protein had a theoretical isoelectric (pI) point of 7.7 and an estimated molecular weight of 34.078 kDa. PhGal8X1 was expressed in various tissues of the fish, with prominent levels in the brain, stomach, and intestine. PhGal8X1 expression was significantly (p < 0.05) induced in the blood and spleen upon challenge with different immune stimuli, including polyinosinic:polycytidylic acid, lipopolysaccharide, and Lactococcus garvieae. The recombinant PhGal8X1 protein demonstrated agglutination activity towards various bacterial pathogens at a minimum effective concentration of 50 μg/mL or 100 μg/mL. Subcellular localization observations revealed that PhGal8X1 was primarily localized in the cytoplasm. PhGal8X1 overexpression in fathead minnow cells significantly (p < 0.05) inhibited viral hemorrhagic septicemia virus (VHSV) replication. The expression levels of four proinflammatory cytokines and two chemokines were significantly (p < 0.05) upregulated in PhGal8X1 overexpressing cells in response to VHSV infection. Furthermore, overexpression of PhGal8X1 exhibited protective effects against oxidative stress induced by H2O2 through the upregulation of antioxidant enzymes. Taken together, these findings provide compelling evidence that PhGal8X1 plays a crucial role in enhancing innate immunity and promoting cell survival through effective regulation of antibacterial, antiviral, and antioxidant defense mechanisms in red-lip mullet.

Evaluation of bioactivity and antibacterial properties of Ti6Al4V-based green biocomposite implant encompassing TiO2 nanotube arrays and garlic extract

This study involved the incorporation of an antibacterial garlic extract into titanium oxide nanotubes (TNTs) formed via the anodization of Ti6Al4V implants. The garlic extract, obtained through low-temperature extraction aided by ultrasound waves, was loaded into the nanotubes. The presence of the nanotubes was confirmed through X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). Fourier-transform infrared spectroscopy (FT-IR) and gas chromatography-mass spectrometry (GC-MS) were used to investigate the presence of bioactive compounds, particularly sulfur compounds responsible for garlic's antibacterial effects. The impact of loading two concentrations (0.1 and 0.2 g per milliliter) of garlic extract on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria was examined. Results indicated a decrease in the growth range of S. aureus from 109 to 106 (CFU/ml) and E. coli from 1011 to 109 (CFU/ml) upon treatment. Additionally, cell adhesion and viability tests conducted on MG63 cells revealed an 8% increase in cell viability with the 0.1 g per milliliter concentration and a 35% decrease with the 0.2 g per milliliter concentration of garlic extract after 72 h of incubation (They have been evaluated by Microculture tetrazolium (MTT) assay). GC-MS analysis identified the presence of diethyl phthalate compounds in the garlic extract, suggesting a potential correlation with cellular toxicity observed in the sample with the higher concentration (0.2 g per milliliter) of garlic extract. Overall, the TNTs loaded with 0.1 g per milliliter of garlic extract simultaneously demonstrated antibacterial activity, cell viability, adhesion, and growth enhancement.

Discovery of novel Thymol-TPP antibiotics that eradicate MRSA persisters

The high prevalence of methicillin-resistant Staphylococcus aureus (MRSA) strains and the formation of non-growing, dormant "persisters" subsets help bacteria evade antibiotic treatment and enhance bacterial resistance, which poses a serious threat to human life and health. It is urgent to discover novel antibacterial therapies effective against MRSA persisters. Thymol is a common nutraceutical with weak antibacterial and antitumor activities. A series of Thymol triphenylphosphine (TPP) conjugates (TPP-Thy3) was designed and synthesized. These compounds showed significantly improved inhibitory activity against Gram-positive bacteria compared with Thymol. Among them, Thy3d displayed a low probability of resistance selection and showed excellent biocompatibility. Interestingly, Thy3d elicited a rapid killing effect of MRSA persisters (99.999%) at high concentration. Fluorescence experiments, electron microscopy, molecular dynamics simulation and bilayer experiment confirmed that Thy3d conjugates exerted potent antimicrobial activity by disrupting the integrity of the membrane of bacterial even the persister. Furthermore, Thy3d exhibited considerable efficacy in a mouse model of subcutaneous murine MRSA infection. In summary, TPP-Thy3 conjugates are a series of novel antibacterial agents and could serve as a new therapeutic strategy for combating antibiotic resistance.

MoOxNWs with mechanical damage - oriented synergistic photothermal / photodynamic therapy for highly effective treating wound infections

Reactive oxygen species (ROS)-based therapy has emerged as a promising antibacterial strategy. However, it faces the limitations of uncontrollable space-time release and excessive lipid peroxidation, which may lead to a series of metabolic disorders and decreased immune function. In this study, mechanical damage by molybdenum oxide nanowires (MoOxNWs) is introduced as a synergistic factor to enhance the photothermal and photodynamic effects for controllable and efficient antibacterial therapy. Through their sharp ends, the nanowires can effectively pierce and damage the bacterial cells, thus facilitating the entry of externally generated ROS into the cells. The ROS are generated via photodynamic effect of the nanowires under a mere 5 min of near-infrared light irradiation. This approach enhances the photothermal (by 27.3 %) and photodynamic properties of ROS generation. MoOxNWs (100 μg·mL-1) achieve sterilisation rates of 97.67 % for extended-spectrum β-lactamase-producing E. coli and 96.34 % for methicillin-resistant Staphylococcus aureus, which are comparable or even exceeding the efficacy of most MoOx-based antibacterial agents. Moreover, they exhibit good biocompatibility and low in vivo toxicity.

Rational molecular design converting fascaplysin derivatives to potent broad-spectrum inhibitors against bacterial pathogens via targeting FtsZ

The filamentous temperature-sensitive mutant Z protein (FtsZ), a key player in bacterial cell division machinery, emerges as an attractive target to tackle the plight posed by the ever growing antibiotic resistance over the world. Therefore in this regard, agents with scaffold diversities and broad-spectrum antibacterial activity against Gram-positive and Gram-negative pathogens are highly needed. In this study, a new class of marine-derived fascaplysin derivatives has been designed and synthesized by Suzuki-Miyaura cross-coupling. Some compounds exhibited potent bactericidal activities against a panel of Gram-positive (MIC = 0.024-6.25 μg/mL) and Gram-negative (MIC = 1.56-12.5 μg/mL) bacteria including methicillin-resistant S. aureus (MRSA). They exerted their effects by dual action mechanism via disrupting the integrity of the bacterial cell membrane and targeting FtsZ protein. These compounds stimulated polymerization of FtsZ monomers and bundling of the polymers, and stabilized the resulting polymer network, thus leading to the dysfunction of FtsZ in cell division. In addition, these agents showed negligible hemolytic activity and low cytotoxicity to mammalian cells. The studies on docking and molecular dynamics simulations suggest that these inhibitors bind to the hydrophilic inter-domain cleft of FtsZ protein and the insights obtained in this study would facilitate the development of potential drugs with broad-spectrum bioactivities.

Discovery of indolylacryloyl-derived oxacins as novel potential broad-spectrum antibacterial candidates

The emergence of serious bacterial resistance towards clinical oxacins poses a considerable threat to global public health, necessitating the development of novel structural antibacterial agents. Seven types of novel indolylacryloyl-derived oxacins (IDOs) were designed and synthesized for the first time from commercial 3,4-difluoroaniline via an eight-step procedure. The synthesized compounds were characterized by modern spectroscopic techniques. All target molecules were evaluated for antimicrobial activities. Most of the prepared IDOs showed a broad antibacterial spectrum and strong activities against the tested strains, especially ethoxycarbonyl IDO 10d (0.25-0.5 μg/mL) and hydroxyethyl IDO 10e (0.25-1 μg/mL) exhibited much superior antibacterial efficacies to reference drug norfloxacin. These highly active IDOs also displayed low hemolysis, cytotoxicity and resistance, as well as rapid bactericidal capacity. Further investigations indicated that ethoxycarbonyl IDO 10d and hydroxyethyl IDO 10e could effectively reduce the exopolysaccharide content and eradicate the formed biofilm, which might delay the development of drug resistance. Preliminary exploration of the antibacterial mechanism revealed that active IDOs could not only destroy membrane integrity, resulting in changes in membrane permeability, but also promote the accumulation of reactive oxygen species, leading to the production of malondialdehyde and decreased bacterial metabolism. Moreover, they exhibited the capability to bind with DNA and DNA gyrase, forming supramolecular complexes through various noncovalent interactions, thereby inhibiting DNA replication and causing bacterial death. All the above results suggested that the newly developed indolylacryloyl-derived oxacins should hold great promise as potential multitargeting broad-spectrum antibacterial candidates to overcome drug resistance.

Dual site reactivity of indole-3-Schiff bases with S/Se/Cl substituted ketenes for stereoselective C-4 substituted indole-β-lactams, biological evaluations, magic chloro effect and molecular docking studies

A convenient methodology for C-4 indole-β-lactam hybrids with chloro, sulphur and seleno substitutions through dual site reactivity of indole-3-Schiff bases towards ketenes has been developed. The reaction proceeded in a stereospecific manner with the exclusive formation of trans-β-lactams assigned with respect to C3-H and C4-H. The synthesized novel β-lactams have been characterized with the help of elemental analysis (CHNS) and spectroscopic techniques viz.1H NMR, 13C NMR, DEPT 135, HSQC and IR. The trans configuration was further estabilished based on X-ray crystallographic data. Examination of antibacterial properties unveiled that only derivatives 5a and 5b, featuring chloro substitution, exhibited potent activities, underscoring the emergence of the recently coined term "magic chloro effect". Molecular docking analysis provided additional support for the observed in vitro antibacterial activities of compounds 5a-b.

Gallium and silver-doped titanium surfaces provide enhanced osteogenesis, reduce bone resorption and prevent bacterial infection in co-culture

Bacterial infection remains a significant problem associated with orthopaedic surgeries leading to surgical site infection (SSI). This unmet medical need can become an even greater complication when surgery is due to malignant bone tumor. In the present study, we evaluated in vitro titanium (Ti) implants subjected to gallium (Ga) and silver (Ag)-doped thermochemical treatment as strategy to prevent SSI and improve osteointegration in bone defects caused by diseases such as osteoporosis, bone tumor, or bone metastasis. Firstly, as Ga has been reported to be an osteoinductive and anti-resorptive agent, its performance in the mixture was proved by studying human mesenchymal stem cells (hMSC) and pre-osteoclasts (RAW264.7) behaviour. Then, the antibacterial potential provided by Ag was assessed by resembling "The Race for the Surface" between hMSC and Pseudomonas aeruginosa in two co-culture methods. Moreover, the presence of quorum sensing molecules in the co-culture was evaluated. The results highlighted the suitability of the mixture to induce osteodifferentiation and reduce osteoclastogenesis in vitro. Furthermore, the GaAg surface promoted strong survival rate and retained osteoinduction potential of hMSCs even after bacterial inoculation. Therefore, GaAg-modified titanium may be an ideal candidate to repair bone defects caused by excessive bone resorption, in addition to preventing SSI. STATEMENT OF SIGNIFICANCE: This article provides important insights into titanium for fractures caused by osteoporosis or bone metastases with high incidence in surgical site infection (SSI) because in this situation bacterial infection can become a major disaster. In order to solve this unmet medical need, we propose a titanium implant modified with gallium and silver to improve osteointegration, reduce bone resorption and avoid bacterial infection. For that aim, we study osteoblast and osteoclast behavior with the main novelty focused on the antibacterial evaluation. In this work, we recreate "the race for the surface" in long-term experiments and study bacterial virulence factors (quorum sensing). Therefore, we believe that our article could be of great interest, providing a great impact on future orthopedic applications.

Use of geopolymers as tunable and sustained silver ion release mediums

Silver was incorporated up to 3.4% (w/w) into the geopolymer structure via precipitation as Ag2O by dispersing the geopolymer powder in an aqueous solution of AgNO3. The precipitates were mainly located in the fine pores within the nanoparticles of the geopolymer network. The fine pores enabled the formation of very fine precipitates, mainly between 2 and 5 nm. The silver-incorporated geopolymer was found to have a sustained Ag+ release that can be tuned down by a thermal treatment, e.g., calcination. The Ag+ release amount could be reduced by about 30-fold after calcination at 850 °C. Calcination reduces the specific surface area, causes shrinkage, and makes the geopolymer structure less pervious. The size of the precipitates remains stable even up to 1050 °C, despite a large amount of sintering-related shrinkage. These results suggest that geopolymers could be a tunable Ag+ source for various antibacterial applications.

Application of Novel Ruthenium (II) Polypyridyl Complexes as Robust DNA Probes, Optical Material and Antimicrobials-An Experimental and DFT Approach

The nature of the interaction of DNA with heteroleptic Ruthenium (II) Polypyridyl complexes of the type [Ru (A)2TPIP]2+, where TPIP = 2-(1-p-tolyl-1H pyrazol-4 -yl)-1H-imidazo [4, 5-f[1. 10] phenanthroline and A = 1,10 phenanthroline (1),4,4'-dimethyl-1,10-ortho Phenanthroline (2), 2,2' - bipyridine (3) and 4, 4' dimethyl 2, 2'- bipyridine (4), has been investigated by experimentaland molecular docking approaches. The order of the DNA binding affinities of the synthesised complexes is 1 > 2 > 3 > 4. The findings imply that the unsubstituted complex has a better affinity to bind with DNA than the substituted (dmp and dmb) emphasizing the significance of the auxiliary ligand. Additionally, as the medium's ionic strength drops, the DNA/Ru ratio rises, or when water is displaced by glycerol, the intercalation of complexes into DNA increases. DFT calculations at the B3LYP/LANL2MB level was used for molecular geometry (Ground State) and electronic characteristic calculations. The HOMO-LUMO gap of the Ru [II] complex is less than the intercalator and hence kinetically labile. Among the complexes, the bpy complex has shown utmost non-linear optical properties (α = -153.9099 10-24esu and β = 3.8498 10-30esu). The docking study shows the significance of the Metal-intercalator's shorter length may increase DNA binding affinity. This study divulges that the Ruthenium (II) polypyridyl complexes bind to DNA preponderantly by intercalation supporting Viscosity studies. All the complexes have a considerable attraction for guanine. The standard disk diffusion method reveals that complexes (1, 2, 3 and 4) have good antibacterial activity.

Synthesis of N-doped and P-doped silicon quantum dots and their applications for tetracycline detection in the honey samples and antibacterial properties

The abuse of tetracycline can lead to its residue in animal derived foods, posing many potential hazards to human health. Therefore, rapid and accurate detection of tetracycline is an important means to ensure food safety. Nitrogen doped and phosphorus doped silicon quantum dots (N-SiQDs, P-SiQDs) with remarkable optical stability were fabricated via a one-pot hydrothermal procedure in this study. Upon the excitation at 346 nm, N-SiQDs and P-SiQDs emitted fluorescence at 431 nm and 505 nm, respectively. Two SiQDs had the potential to serve as a probe for detecting low concentrations of tetracycline (TC), employing a mechanism of the static quenching effect. The calibration curves of N-SiQDs and P-SiQDs were linear within the range of 0-0.8 μM and 0-0.4 μM, the limits of detection were low as 5.35 × 10-4 μmol/L and 6.90 × 10-3 μmol/L, respectively. This method could be used successfully to detect TC in honey samples. Moreover, the remarkable antibacterial efficacy of two SiQDs could be attributed to the generation of a large number of intracellular reactive oxygen species. The SEM images showed that the structure of bacterial cell was disrupted and the surface became irregular when treated with both SiQDs. These properties enabled potential usage of SiQDs as excellent antibacterial material for different biomedical applications.

Medicinal and chemosensing applications of chitosan based material: A review

Chitosan (CTS), has emerged as a highly intriguing biopolymer with widespread applications, drawing significant attention in various fields ranging from medicinal to chemosensing. Key characteristics of chitosan include solubility, biocompatibility, biodegradability and reactivity, making it versatile in numerous sectors. Several derivatives have been documented for their diverse therapeutic properties, such as antibacterial, antifungal, anti-diabetic, anti-inflammatory, anticancer and antioxidant activities. Furthermore, these compounds serve as highly sensitive and selective chemosensor for the detection of various analytes such as heavy metal ions, anions and various other species in agricultural, environmental and biological matrixes. CTS derivatives interacting with these species and give analytical signals. In this review, we embark on an exploration of the latest advancements in CTS-based materials, emphasizing their noteworthy contributions to medicinal chemistry spanning the years from 2021 to 2023. The intrinsic biological and physiological properties of CTS make it an ideal platform for designing materials that interact seamlessly with biological systems. The review also explores the utilization of chitosan-based materials for the development of colorimetric and fluorimetric chemosensors capable of detecting metal ions, anions and various other species, contributing to advancements in environmental monitoring, healthcare diagnostics, and industrial processes.

Sustainable bioactive food packaging based on electrospun zein-polycaprolactone nanofibers integrated with aster yomena extract loaded halloysite nanotubes

Compostable zein-polycaprolactone (PZ) electrospun nanofiber integrated with different concentrations of Aster yomena extract loaded halloysite nanotubes (A. yomena-HNT) as bioactive nanofibrous food packaging is reported. SEM micrographs reveal heterogeneous nanofibers. A. yomena extract used in the study showed weak antioxidant activity with AAI and TEAC values of 0.229 and 0.346. In vitro, release profile over 7 days of A. yomena indicates a controlled, sustained, and prolonged release. The prepared nanofibers were effective against both gram-positive and gram-negative bacteria. The prepared composite nanofibers were rendered biocompatible and nontoxic when subjected to WST-1 and LDH assay after incubating with NIH 3T3 mouse fibroblast cell line. PZ-15 nanofiber packaging showed the best postharvest quality preservation in Black mulberry fruits after 4 days of storage at 25 °C and 85 % Rh. Moreover, the in vitro decomposition test reveals that the fabricated nanofibers decompose in the soil and do not pose as a threat to the environment.

An injectable sequential dual-crosslinking catechol-functionalized hyaluronic acid hydrogel for enhanced regeneration of full-thickness burn injury

Severe burn injuries with massive dermal loss are often underestimated despite their significant impact on morbidity and mortality. Resembling the natural extracellular matrix (ECM), hyaluronic acid (HA)-based dressings have been extensively explored as suitable candidates for burn wound treatment. However, native HA hydrogel's limitations, such as low mechanical strength, rapid degradation, and uncontrollable drug delivery, hinder its efficacy, especially for full-thickness burns requiring injectable hydrogels with robust antibacterial and angiogenic capabilities. Herein, we present a novel multifunctional sequential dual-curing hydrogel system, combining hyperbranched poly(DMA-DMAPMA-PEGDA) (DDP) polymer with thiolated hyaluronic acid (HA-SH). The DDP copolymer, featuring multi-vinyls and catechol functionalities, facilitates two curing reactions taking place sequentially with HA-SH under physiological conditions, balancing convenient injection with the mechanical strength essential for effective wound management. Furthermore, the resulting DDP/HA hydrogels demonstrate enhanced therapeutic attributes, including intrinsic angiogenic and antimicrobial effects, setting them as promising dressing options for deep burn wound therapy.

Regulating molecular brush structure on cotton textiles for efficient antibacterial properties

The molecular brush structures have been developed on cotton textiles for long-term and efficient broad-spectrum antimicrobial performances through the cooperation of alkyl-chain and quaternary ammonium sites. Results show that efficient antibacterial performances can be achieved by the regulation of the alkyl chain length and quaternary ammonium sites. The antibacterial efficiency of the optimized molecular brush structure of [3-(N,N-Dimethylamino)propyl]trimethoxysilane with cetyl modification on cotton textiles (CT-DM-16) can reach more than 99 % against both E. coli and S. aureus. Alkyl-chain grafting displayed significantly improvement in the antibacterial activity against S. aureus with (N,N-Diethyl-3-aminopropyl)trimethoxysilane modification on cotton textiles (CT-DE) based materials. The positive N sites and alkyl chains played important roles in the antibacterial process. Proteomic analysis reveals that the contributions of cytoskeleton and membrane-enclosed lumen in differentially expressed proteins have been increased for the S. aureus antibacterial process, confirming the promoted puncture capacity with alkyl-chain grafting. Theoretical calculations indicate that the positive charge of N sites can be enhanced through alkyl-chain grafting, and the possible distortion of the brush structure in application can further increase the positive charge of N sites. Uncovering the regulation mechanism is considered to be important guidance to develop novel and practical antibacterial materials.

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive

OBJECTIVES

The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility.

METHODS

Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated.

RESULTS

TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity.

CONCLUSIONS

The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Development and characterization of a topical gel, containing lavender (Lavandula angustifolia) oil loaded solid lipid nanoparticles

Gels loaded with nanocarriers offer interesting ways to create novel therapeutic approaches by fusing the benefits of gel and nanotechnology. Clinical studies indicate that lavender oil (Lav-O) has a positive impact on accelerating wound healing properly based on its antimicrobial and anti-inflammatory effects. Initially Lav-O loaded Solid Lipid Nanoparticles (Lav-SLN) were prepared incorporating cholesterol and lecithin natural lipids and prepared SLNs were characterized. Next, a 3% SLN containing topical gel (Lav-SLN-G) was formulated using Carbopol 940. Both Lav-SLN and Lav-SLN-G were assessed in terms antibacterial effects against S. aureus. Lav-SLNs revealed a particle size of 19.24 nm, zeta potential of -21.6 mv and EE% of 75.46%. Formulated topical gel presented an acceptable pH and texture properties. Minimum Inhibitory/Bactericidal Concentration (MIC/MBC) against S. aureus for LAv-O, Lav-SLN and Lav-SLN-G were 0.12 and 0.24 mgml- 1, 0.05 and 0.19 mgml- 1 and 0.045, 0.09 mgml- 1, respectively. Therefore, SLN can be considered as an antimicrobial potentiating nano-carrier for delivery of Lav-O as an antimicrobial and anti-inflammatory agent in topical gel.

Novel chitosan-based smart bio-nanocomposite films incorporating TiO2 nanoparticles for white bread preservation

Chitosan (CS)-based bio-nanocomposite food packaging films were prepared via solvent-casting method by incorporating a unique combination of additives and fillers, including polyvinyl alcohol (PVA), glycerol, Tween 80, castor oil (CO), and nano titanium dioxide (TiO2) in various proportions to enhance film properties. For a comprehensive analysis of the synthesized films, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile testing, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and UV-vis spectrophotometry were employed. Furthermore, the antimicrobial efficacy of the films against S. aureus, E. coli, and A. niger was examined to assess their potential to preserve food from foodborne pathogens. The results claimed that the inclusion of castor oil and TiO2 nanoparticles considerably improved antimicrobial properties, UV-vis light barrier properties, thermal stability, optical transparency, and mechanical strength of the films, while reducing their water solubility, moisture content, water vapor and oxygen permeability. Based on the overall analysis, CS/PVA/CO/TiO2-0.3 film can be selected as the optimal one for practical applications. Furthermore, the practical application of the optimum film was evaluated using white bread as a model food product. The modified film successfully extended the shelf life of bread to 10 days, surpassing the performance of commercial LDPE packaging (6 days), and showed promising attributes for applications in the food packaging sector. These films exhibit superior antimicrobial properties, improved mechanical strength, and extended shelf life for food products, marking a sustainable and efficient alternative to conventional plastic packaging in both scientific research and industrial applications.

LSPR sensing for in situ monitoring the Ag dissolution of Au@Ag core-shell nanoparticles in biological environments

Silver nanoparticles (AgNPs) are extensively used as an antibacterial agent, and monitoring the dissolution behavior of AgNPs in native biological environments is critical in both optimizing their performance and regulating their safety. However, current assessment methods rely on sophisticated analytical tools that are off-site and time-consuming with potential underestimations, due to complicated sample preparation. Although localized surface plasmon resonance (LSPR) sensing offers a facile method for the detection of AgNP dissolution, it is limited by low sensitivity and poor nanoparticle stability in native biological environments. Herein, we constructed a highly sensitive and stable LSPR sensor using gold-silver core-shell nanoparticles (Au@AgNPs), in combination with polymeric stabilizing agents, for the direct measurement of the Ag shell dissolution in native biological media. The high sensitivity was attributed to the acute and large LSPR shift generated by bimetallic nanoparticles. The sensor was used for the real-time monitoring of the Ag dissolution of Au@AgNPs during their co-culture with both bacteria and fibroblast cells. The media pH was found to dominate the Ag dissolution process, where Au@AgNPs exhibited bactericidal effects in the bacteria environment with relatively low pH, but they showed little toxicity towards fibroblast cells at pH 7.4. The minimum inhibition concentration of Au@AgNPs for bacterial growth was found similar to that of AgNO3 in terms of released Ag amount. Thus, stabilized Au@AgNPs not only allow the in-situ monitoring of Ag dissolution via LSPR sensing but also constitute an effective antibacterial agent with controlled toxicity, holding great potential for future biomedical and healthcare applications.

Acer tegmentosum extract-mediated silver nanoparticles loaded chitosan/alginic acid scaffolds enhance healing of E. coli-infected wounds

This work developed Acer tegmentosum extract-mediated silver nanoparticles (AgNPs) loaded chitosan (CS)/alginic acid (AL) scaffolds (CS/AL-AgNPs) to enhance the healing of E. coli-infected wounds. The SEM-EDS and XRD results revealed the successful formation of the CS/AL-AgNPs. FTIR analysis evidenced that the anionic group of AL (-COO-) and cationic amine groups of CS (-NH3+) were ionically crosslinked to form scaffold (CS/AL). The CS/AL-AgNPs exhibited significant antimicrobial activity against both Gram-positive (G+) and Gram-negative (G-) bacterial pathogens, while being non-toxic to red blood cells (RBCs), the hen's egg chorioallantoic membrane (HET-CAM), and a non-cancerous cell line (NIH3T3). Treatment with CS/AL-AgNPs significantly accelerated the healing of E. coli-infected wounds by regulating the collagen deposition and blood parameters as evidenced by in vivo experiments. Overall, these findings suggest that CS/AL-AgNPs are promising for the treatment of infected wounds.

Synergistic impact of heat and salicylic acid pretreatment on gluten films: Characterization and functional properties

This study investigates how wheat gluten (WG) films in the presence of salicylic acid are influenced by thermal pretreatment. Unlike previous methods conducted at low moisture content, our procedure involves pretreating WG at different temperatures (65 °C, 75 °C, and 85 °C), in a solution with salicylic acid. This pretreatment aims to enhance protein unfolding, thus providing more opportunities for protein-protein interactions during the subsequent solvent casting into films. A significant increase in β-sheet structures was observed in FTIR spectra of samples pretreated at 75 °C and 85 °C, showing a prominent peak in the range of 1630-1640 cm-1. The pretreatment at 85 °C was found to be effective in improving the water resistivity of the films by up to 247 %. Moreover, it led to a significant enhancement of 151 % in tensile strength and a 45 % increase in the elastic modulus. The reduced solubility observed in films derived from pretreated WG suggests the development of an intricate protein network arising from protein-protein interactions during the pretreatment and film formation. Thermal pretreatment at 85 °C significantly enhances the structural and mechanical properties of WG films, including improved water resistivity, tensile strength, and intricate protein network formation.

Dimeric peptoids as antibacterial agents

Building upon our previous study on peptoid-based antibacterials which showed good activity against Gram-positive bacteria only, herein we report the synthesis of 34 dimeric peptoid compounds and the investigation of their activity against Gram-positive and Gram-negative pathogens. The newly designed peptoids feature a di-hydrophobic moiety incorporating phenyl, bromo-phenyl, and naphthyl groups, combined with variable lengths of cationic units such as amino and guanidine groups. The study also underscores the pivotal interplay between hydrophobicity and cationicity in optimizing efficacy against specific bacteria. The bromophenyl dimeric guanidinium peptoid compound 10j showed excellent activity against S. aureus 38 and E. coli K12 with MIC of 0.8 μg mL-1 and 6.2 μg mL-1, respectively. Further investigation into the mechanism of action revealed that the antibacterial effect might be attributed to the disruption of bacterial cell membranes, as suggested by tethered bilayer lipid membranes (tBLMs) and cytoplasmic membrane permeability studies. Notably, these promising antibacterial agents exhibited negligible toxicity against mammalian red blood cells. Additionally, the study explored the potential of 12 active compounds to disrupt established biofilms of S. aureus 38. The most effective biofilm disruptors were ethyl and octyl-naphthyl guanidinium peptoids (10c and 10 k). These compounds 10c and 10 k disrupted the established biofilms of S. aureus 38 with 51 % at 4x MIC (MIC = 17.6 μg mL-1 and 11.2 μg mL-1) and 56 %-58 % at 8x MIC (MIC = 35.2 μg mL-1 and 22.4 μg mL-1) respectively. Overall, this research contributes insights into the design principles of cationic dimeric peptoids and their antibacterial activity, with implications for the development of new antibacterial compounds.

In vitro evaluation of the antimicrobial properties of terpinen-4-ol on apical periodontitis-associated bacteria

Manuka oil and tea tree oil are essential oils with known antibacterial properties that are believed to be caused by one main component: terpinen-4-ol. Terpinen-4-ol has potent antibacterial activity against caries-related microorganisms. However, few studies have investigated the antimicrobial effects of terpinen-4-ol on bacteria in apical periodontitis. Thus, the objective of the present study was to evaluate the antibacterial and antibiofilm potential of terpinen-4-ol against Enterococcus faecalis, Porphyromonas gingivalis, Prevotella intermedia, and Fusobacterium nucleatum, which have all been detected in apical periodontitis. The minimum inhibitory and minimum bactericidal concentrations of terpinen-4-ol were determined to assess its activity against biofilms. The minimum inhibitory concentration of terpinen-4-ol was 0.25% against E. faecalis and F. nucleatum, 0.05% against P. gingivalis, and 0.1% against P. intermedia. The minimum bactericidal concentration of terpinen-4-ol was 1.0% against E. faecalis, 0.2% against P. gingivalis and P. intermedia, and 0.5% against F. nucleatum. In the biofilm evaluations, all terpinen-4-ol-treated bacteria had significant reductions in biofilm viability compared with controls in experiments assessing attachment inhibitory activity. Furthermore, structural alterations and decreased bacterial cell clumping were observed under scanning electron microscopy, and significantly decreased cell survival was noted using fluorescence microscopy. Together, these results suggest that terpinen-4-ol is a potential antibacterial agent with bactericidal properties, and can also act on established biofilms.

Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials

OBJECTIVE

Remineralising composites with antibacterial properties may seal the cavity and prevent secondary caries. This study aimed at developing experimental flowable composites containing different concentrations of fluoride-doped calcium phosphate fillers and evaluating their remineralising and antibacterial properties.

METHODS

Experimental resin-based composites containing different concentrations (0-20 %) of fluoride-doped calcium phosphate fillers (VS10/VS20) were formulated. The release of calcium (Ca), phosphate (PO) and fluoride (F) ions was assessed for 30 days. Remineralisation properties were evaluated through ATR-FTIR and SEM/EDX after storage in simulated body fluid (SBF). The metabolic activity and viability of Streptococcus gordonii was also evaluated through ATP, CFU and live/dead confocal microscopy. The evaluation of specific monomer elution from the experimental composites was conducted using high-performance liquid chromatography (HPLC).

RESULTS

The composites containing VS10 showed the highest release of Ca, those containing VS20 released more F over time (p < 0.05), while there was no significant difference in terms of PO ions release between the groups (p > 0.05). A quick 7-day mineral precipitation was observed in the tested composites containing VS10 or VS20 at 10 %; these materials also showed the greatest antibacterial activity (p < 0.05). Moreover, the tested composites containing VS10 presented the lowest elution of monomers (p < 0.05).

CONCLUSIONS

Innovative composites were developed with low monomers elution, evident antibacterial activity against S. gordonii and important remineralisation properties due to specific ions release.

CLINICAL SIGNIFICANCE

Novel composites containing fluoride-doped calcium phosphates may be promising to modulate bacteria growth, promote remineralisation and reduce the risk of cytotoxicity related to monomers' elution.

Effect of DES lignin incorporation on physicochemical, antioxidant and antimicrobial properties of carboxymethyl cellulose-based films

Herein, three pretreated grapevine lignins were incorporated into carboxymethyl cellulose films. The effects of traditional NaOH pretreated lignin and DES (ChCl-LA, ChCl-LA & K2CO3-EG) pretreated lignin on film properties were compared. Modern analytical techniques were employed to systematically characterize the pretreated lignin and the different CMC-lignin films. The results showed that DES lignin was of high purity, low molecular weight, and homogeneous structure. It outperformed traditional NaOH lignin in terms of compatibility with CMC, enabling it to perform its bioactivity and physicochemical functions in films. This feature effectively enhanced the hydrophobicity, UV shielding ability, water vapor barrier, thermal stability, mechanical properties, and biological activity of CMC-DES lignin film. NMR (2D HSQC) showed that the excellent antioxidant and antibacterial capabilities of CMC-DES lignin film are due to the retention of butyl (S) and p-hydroxyphenyl (H) units in DES lignin, resulting in its rich phenolic hydroxyl content. The detailed structural elucidation of DES lignin's chemical interactions with CMC provided valuable insights into the advantageous properties observed in the films, presenting innovative solutions for applications in the food packaging and preservation industries.

KGRT peptide incorporated hydrogel with antibacterial activity for wound healing by optimizing cellular functions via ERK/eNOS signaling

Bacterial infected wounds, which is characterized by easy infection, multiple inflammation and slow healing, is a complex symptom, resulting from metabolic disorder of the wound microenvironment. In this study, a series of self-healing double-network hydrogels based on KGRT peptide (Lys-Gly-Arg-Thr) with antibacterial, anti-inflammatory and optimizing cellular functions were designed to promote the healing of infected wounds with full-thickness skin defects. Moreover, the dextran hydrogelintroduces a large number of side chains, which are entangled with each other in the Schiff base network to form an interpenetrating structure. The hydrogel might regulate cell metabolism, differentiation and vascular endothelial growth factor (VEGF) function. Importantly, both in vitro and in vivo data showed that hydrogel not only has good antibacterial properties (99.8 %), but also can eradicate bacterial biofilm, effectively reduce inflammation (down-regulated IL-1β, TNF-α and ROS) and accelerate chronic wound healing process by speeding-up wound closure, increasing granulation tissue thickness, collagen deposition, angiogenesis (up-regulated CD31). The hydrogel could up-regulate mRNA expression of PI3K, AKT, ERK, eNOS, HIF-1α and VEGF, which were correlated with wound healing. Consistently, the hydrogel could promote infected wounds healing and inhibit inflammation through ERK/eNOS signaling pathway. Collectively, hydrogel has excellent clinical application potential for promoting infected wound healing.

MOF/MXene-loaded PVA/chitosan hydrogel with antimicrobial effect and wound healing promotion under electrical stimulation and improved mechanical properties

Electrical stimulation modulates cell behavior and influences bacterial activity, so highly conductive, antimicrobial hydrogels are suitable for promoting wound healing. In this study, highly conductive and antimicrobial Ti3C2Tx (MXene) hydrogels composed of chitosan and poly(vinyl alcohol) and AgCu- H2PYDC MOF were developed. In PVACS/MOF/MXene (PCMM) hydrogels, the MXene layer acts as an electrical conductor. The electrical conductivity is 0.61 ± 0.01 S·cm-1. PCMM hydrogels modulate cell behavior and provide ES antimicrobial capacity under ES at 1 V. The metal ions of MOF form coordination with chitosan molecules and increase the cross-linking density between chitosan molecules, thus improving the mechanical properties of the hydrogel (tensile strength 0.088 ± 0.04 MPa, elongation at break 233 ± 11 %). The PCMM gels had good biocompatibility. The PCMM hydrogels achieved 100 % antibacterial activity against E. coli and S. aureus for 12 h. 1 V electrical stimulation of PCMM hydrogel accelerated the wound healing process in mice by promoting cell migration and neovascularization, achieving 97 ± 0.4 % wound healing on day 14. The hydrogel dressing PCMM-0.1 with MOF addition of 0.1 % had the best wound healing promoting effect and which is a promising dressing for promoting wound healing and is a therapeutic strategy worth developing.

Near-infrared light responsive gold nanoparticles coating endows polyetheretherketone with enhanced osseointegration and antibacterial properties

Polyetheretherketone (PEEK) is considered as a promising dental implant material owing to its excellent physicochemical and mechanical properties. However, its wide range of applications is limited by its biologically inert nature. In this study, a near-infrared (NIR) light responsive bioactive coating with gold nanoparticles (AuNPs) and metronidazole adhered to the PEEK surface via dopamine polymerization. Compared to pure PEEK, the hydrophilicity of the treated PEEK surface was significantly improved. In addition, under NIR light, the surface coating exhibited photothermal conversion effect, and gold nanoparticles and the antibiotic can be released from the coating. This improved the antibacterial properties of PEEK materials. Moreover, the coating was more conducive to the early adhesion of bone mesenchymal stem cells. The results of in vitro and in vivo osteogenic activity studies showed that the developed coating promoted osseointegration of PEEK implants, and NIR light irradiation further improved the antibacterial ability and osteogenic activity of PEEK implants. Through RNA sequencing, the potential underlying mechanism of promoting bone formation of the AuNPs coating combined metronidazole was interpreted. In summary, the developed coating is a potential surface treatment strategy that endows PEEK with enhanced osseointegration and antibacterial properties.

Nanotextured titanium inhibits bacterial activity and supports cell growth on 2D and 3D substrate: A co-culture study

Medical implant-associated infections pose a significant challenge to modern medicine, with aseptic loosening and bacterial infiltration being the primary causes of implant failure. While nanostructured surfaces have demonstrated promising antibacterial properties, the translation of their efficacy from 2D to 3D substrates remains a challenge. Here, we used scalable alkaline etching to fabricate nanospike and nanonetwork topologies on 2D and laser powder-bed fusion printed 3D titanium. The fabricated surfaces were compared with regard to their antibacterial properties against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, and mesenchymal stromal cell responses with and without the presence of bacteria. Finite elemental analysis assessed the mechanical properties and permeability of the 3D substrate. Our findings suggest that 3D nanostructured surfaces have potential to both prevent implant infections and allow host cell integration. This work represents a significant step towards developing effective and scalable fabrication methods on 3D substrates with consistent and reproducible antibacterial activity, with important implications for the future of medical implant technology.

Designing a bi-layer multifunctional hydrogel patch based on polyvinyl alcohol, quaternized chitosan and gallic acid for abdominal wall defect repair

In abdominal wall defect repair, surgical site infection (SSI) remains the primary cause of failure, while complications like visceral adhesions present significant challenges following patch implantation. We designed a Janus multifunctional hydrogel patch (JMP) with antibacterial, anti-inflammatory, and anti-adhesive properties. The patch comprises two distinct layers: a pro-healing layer and an anti-adhesion layer. The pro-healing layer was created by a simple mixture of polyvinyl alcohol (PVA), quaternized chitosan (QCS), and gallic acid (GA), crosslinked to form PVA/QCS/GA (PQG) hydrogels through GA's self-assembly effect and hydrogen bonding. Additionally, the PVA anti-adhesive layer was constructed using a drying-assisted salting method, providing a smooth and dense physical barrier to prevent visceral adhesion while offering essential mechanical support to the abdominal wall. The hydrogel patch demonstrates widely adjustable mechanical properties, exceptional biocompatibility, and potent antimicrobial properties, along with a sustained and stable release of antioxidants. In rat models of skin and abdominal wall defects, the JMP effectively promoted tissue healing by controlling infection, inhibiting inflammation, stimulating neovascularization, and successfully preventing the formation of visceral adhesions. These compelling results highlight the JMP's potential to improve the success rate of abdominal wall defect repair and reduce surgical complications.

In vitro antibiofilm, antibacterial, antioxidant, and antitumor activities of the brown alga Padina pavonica biomass extract

The antibiofilm, antibacterial, antioxidant, and anticancer activities of the methanolic extract of Padina pavonica L. were determined. Results deduced that the algal extract had a high biofilm formation inhibitory action done via crystal violet (CV) assay, to 88-99%. The results showed a strong antibacterial against the identified bacteria species. Staphylococcus aureus, Enterococcus faecalis, Pseudomonas aeruginosa, Klebsiella pneumonia, Bacillus subtilis, and the extract had moderate antibacterial activity against Escherichia coli, Pseudomonas fluorescens and Streptococcus agalactiae. The algal extract has a concentration-dependent DPPH radical scavenging activity (84.59%, with IC50 = 170.31 µg/ml). The inhibitory percent of P. pavonica methanolic extract in vitro antiproliferative activity was 1.79-98.25% with IC50 = 15.14 µg/ml against lung carcinoma. Phenols, terpenes, amino acids, alkaloids, flavones, alcohols, and fatty acids were among the metabolites whose biological actions were evaluated. In conclusion, for the first time, P. pavonica methanolic extract exhibited effective antibiofilm, antibacterial, antioxidant, and anticancer activities.      .

Designing of chitosan/gelatin based nanocomposite films integrated with Vachellia nilotica gum carbon dots for smart food packaging applications

Microbial growth and exposure to UV light is a persistent global concern resulting in food spoilage, therefore, smart packaging is crucial for the availability of safer and quality food. Present work describes fabrication of chitosan (CH) and gelatin (GL) based nanocomposite films by introducing green source, highly fluorescent Vachillia nilotica gum-derived carbon dots (VNG-CDs). The VNG-CDs and incorporated CH/GL nanocomposite films were characterized by UV-Visible, FTIR, XRD, SEM and TGA analysis. The FTIR and XRD data revealed that VNG-CDs, chitosan, gelatin, and glycerol are combined/interlinked to form homogeneous nanocomposite films. The inclusion of VNG-CDs to CS/GL-CDs nanocomposite film efficiently enhanced the thermal stability and improved mechanical properties. VNG-CDs added to films markedly blocked the ultraviolet light and their effectiveness improved as concentration of CDs increases, being >90 % in UVC (200-280 nm) region. The prepared CS/GL-CDs nanocomposite films manifested radical scavenging activity, reducing capability and also excellently inhibited growth of E. coli, K. pneumonia and S. aureus bacteria. The viability of CS/GL-CDs nanocomposite films examined using banana as a model fruit extending the storage time by two weeks. In conclusion, CH/GL films containing VNG-CDs can be developed into smart packaging materials with enhanced protection and antimicrobial properties.

Tetracycline hydrochloride loaded-alginate based nanoparticle-hydrogel beads for potential wound healing applications: In vitro drug delivery, release kinetics, and antibacterial activity

Novel hydrogel beads based on nanocomposite with outstanding antibacterial and swelling capabilities have been successfully produced as an efficient drug carrier for potential drug delivery systems in wound healing applications. The beads were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and EDX-Mapping analysis. Then, using tetracycline hydrochloride (TCH) as a model drug system, they were studied in vitro for their potential efficiency as pH and temperature dependent sustained drug delivery carriers. Moreover, they were assessed in terms of porosity, swelling degree, encapsulation efficiency, and in vitro release kinetics. Beads released drugs at their highest levels under alkaline circumstances (pH = 8) and at a temperature of 39 °C, with a cumulative TCH release of 96.2 % at 36 h and in accordance with the Weibull kinetics model (R2 = 0.98). Additionally, the disc diffusion experiment demonstrated the strong antibacterial activity of the synthesized beads and offered a feasible and cost-effective wound dressing material for treating infected wounds.

Marine Antimicrobial Peptides: An Emerging Nightmare to the Life-Threatening Pathogens

The emergence of multidrug-resistant pathogens due to improper usage of conventional antibiotics has created a global health crisis. Alternatives to antibiotics being an urgent need, the scientific community is forced to search for new antimicrobials. This exploration has led to the discovery of antimicrobial peptides, a group of small peptides occurring in different phyla such as Porifera, Cnidaria, Annelida, Arthropoda, Mollusca, Echinodermata, and Chordata, as a component of their innate immune system. The marine environment, possessing immense diversity of organisms, is undoubtedly one of the richest sources of unique potential antimicrobial peptides. The distinctiveness of marine antimicrobial peptides lies in their broad-spectrum activity, mechanism of action, less cytotoxicity, and high stability, which form the benchmark for developing a potential therapeutic. This review aims to (1) synthesise the available information on the distinctive antimicrobial peptides discovered from marine organisms, particularly over the last decade, and (2) discuss the distinctiveness of marine antimicrobial peptides and their prospects.

Synthesis, antibacterial activity, and 3D-QASR studies of matrine-indole derivatives as potential antibiotics

Matrine and indole have antibacterial, anticancer, and other biological activities, in order to develop new antibiotics to solve the problem of multi-drug resistant bacteria. In this paper, we synthesized a series of 29 novel matrine derivatives as potential drug candidates by combining indole analogs and matrine. The antibacterial activity of these compounds was evaluated through minimum inhibitory concentration (MIC) assays against five bacterial strains (S. aureus, C. albicans, P. acnes, P. aeruginosa, and E. coli). The obtained results demonstrated promising antibacterial efficacy, particularly for compounds A20 and A18, which exhibited MICs.au values of 0.021 and 0.031 mg/ml, respectively, against S. aureus. Moreover, compounds A20 and A27 displayed remarkable MICc.al values of 2.806 and 4.519 mg/ml, respectively, against C. albicans, surpassing the performance of the clinical antibiotic penicillin G sodium (0.0368 mg/ml) and fluconazole (4.849 mg/ml). These findings underscore the significant bacteriostatic activity of the matrine derivatives. Furthermore, to gain a deeper understanding 3D-QSAR modeling was employed, revealing the critical influence of steric structure, charge distribution, hydrophobic interactions, and hydrogen bonding within the molecular structure on the bacteriostatic activity of the compounds. Additionally, molecular docking simulations shed light on the interaction between compound A20 and bacterial proteins, highlighting the involvement of hydrogen bonding, hydrophobic interactions, and π-π conjugation in the formation of stable complexes that inhibit the normal functioning of the proteins. This comprehensive analysis provided valuable insights into the antibacterial mechanism of the novel matrine derivatives, offering theoretical support for their potential application as antibiotics.

Recent advances in antimicrobial peptide-based therapy

Antimicrobial peptides (AMPs) are a group of polypeptide chains that have the property to target and kill a myriad of microbial organisms including viruses, bacteria, protists, etc. The first discovered AMP was named gramicidin, an extract of aerobic soil bacteria. Further studies discovered that these peptides are present not only in prokaryotes but in eukaryotes as well. They play a vital role in human innate immunity and wound repair. Consequently, they have maintained a high level of intrigue among scientists in the field of immunology, especially so with the rise of antibiotic-resistant pathogens decreasing the reliability of antibiotics in healthcare. While AMPs have promising potential to substitute for common antibiotics, their use as effective replacements is barred by certain limitations. First, they have the potential to be cytotoxic to human cells. Second, they are unstable in the blood due to action by various proteolytic agents and ions that cause their degradation. This review provides an overview of the mechanism of AMPs, their limitations, and developments in recent years that provide techniques to overcome those limitations. We also discuss the advantages and drawbacks of AMPs as a replacement for antibiotics as compared to other alternatives such as synthetically modified bacteriophages, traditional medicine, and probiotics.

Bio-fabrication of silver nanoparticles using Commelina erecta, L.: a mechanistic approach on synthesis, optimization, antibacterial, and antioxidant potential

The ongoing exploration of economical, sustainable, and environment-friendly methods for synthesizing monodisperse colloidal metal nanoparticles is growing day by day due to their potential application in various fields. The use of plant derivatives in nanoparticle synthesis and their suitability as sustainable catalysts have emerged as significant areas of research. In this study, silver nanoparticles were synthesized using an aqueous extract obtained from the commonly found weed Commelina erecta, L. Extensive study is conducted to optimize various synthesis parameters such as pH, reducing agent concentration, silver nitrate concentration, and temperature. The plant extract utilized in the synthesis process contained variety of antioxidants, including malic acid, phenol, benzoic acid, and catechol, which played a crucial role in both reduction and capping during the synthesis process, thereby making them suitable for biomedical applications. The optimized synthesis process yielded silver nanoparticles with a particle size of 16.2 ± 3.1 nm. These nanoparticles exhibited excellent stability and demonstrated remarkable antibacterial activity compared to the standard antibacterial agent, streptomycin. In addition, the silver nanoparticles displayed promising antioxidant activity attributed to the presence of antioxidant functional groups on their surface. This study reports, for the first time, the synthesis of silver nanoparticles using antioxidant compounds present in C. erecta, L. plant extract. The antioxidant compounds identified through GC-MS belong to phenols, phenolic acids, and carboxylic acid groups. Furthermore, the exceptional antimicrobial and antioxidant properties exhibited by the synthesized silver nanoparticles offer new possibilities for their potential applications.

Conducting biointerface of spider-net-like chitosan-adorned polyurethane/SPIONs@SrO2-fMWCNTs for bone tissue engineering and antibacterial efficacy

In pursuit of enhancing bone cell proliferation, this study delves into the fabrication of porous scaffolds through the integration of nanomaterials. Specifically, we present the development of highly conductive chitosan (CS) nanonets on fibro-porous polyurethane (PU) bio-membranes. These nanofibers comprise functionalized multiwall carbon nanotubes (fMWCNTs), well-dispersed superparamagnetic iron oxide (SPIONs), and strontium oxide (SrO2) nanoparticles. The resulting porous scaffold exhibits remarkable interfacial biocompatibility, antibacterial properties, and load-bearing capability. Through meticulous in vitro investigations, the CS-PU/SPIONs/SrO2-fMWCNTs nanofibrous scaffolds have demonstrated a propensity to promote bone cell regeneration. Notably, the integration of these nanomaterials has been found to upregulate crucial bone-related markers, including ALP, ARS, COL-I, RUNX2, and SPP-I. The evaluation of these markers, conducted through quantitative real-time polymerase chain reaction (qRT-PCR) and immunocytochemistry, substantiates the improved cell survival and enhanced osteogenic differentiation facilitated by the integrated nanomaterials. This comprehensive analysis underscores the efficacy of CS-PU/SPIONs/SrO2-fMWCNTs bioscaffolds in promoting MC3T3-E1 cell regeneration within, thereby holding promise for advancements in bone tissue engineering and regenerative medicine.

Dual-functional thermosensitive hydrogel for reducing infection and enhancing bone regeneration in infected bone defects

The contamination of bone defects is a serious therapeutic problem. The treatment of infected bone defects involves rigorous infection control followed by bone reconstruction. Considering these two processes, the development of biomaterials possessing antibacterial and osteogenic properties offers a promising approach for the treatment of infected bone defects. In this study, a dual-functional, thermosensitive, and injectable hydrogel composed of chitosan (CS), quaternized CS (QCS), and nano-hydroxyapatite (nHA) was designed, and the ratio of CS to QCS in the hydrogel was optimized to enhance the antibacterial efficacy of CS while reducing the cytotoxicity of QCS. In vitro studies demonstrated that the hydrogel with an 85 %:15 % ratio of CS to QCS exhibited excellent biocompatibility and antibacterial properties while also possessing suitable mechanical characteristics and degradability. The incorporation of nHA into the hydrogel enhanced MC3T3-E1 proliferation and osteogenic differentiation. Moreover, this hydrogel demonstrated superior in vivo therapeutic effectiveness in a rabbit model of infected bone defect. In summary, this study provides a promising material design and a comprehensive one-step treatment strategy for infected bone defects.

The essential oil of Melaleuca alternifolia incorporated into hydrogel induces antimicrobial and anti-inflammatory effects on infected wounds by Staphylococcus aureus

Staphylococcus aureus is one of the most common bacterial isolates found in wounds. Thus, innovative dressings, such as hydrogels, are interesting vehicles for incorporating bioactive compounds like those from Melaleuca alternifolia essential oil (MaEO). In this study, we evaluated the antimicrobial and anti-inflammatory potential of MaEO incorporated into an alginate and chitosan hydrogel for treating wounds infected by S. aureus. The hydrogel incorporated with MaEO 1% (HMa 1%) was homogeneous with a bright pale-yellow color and the characteristic smell of Melaleuca. The incorporation of MaEO 1% does not affect the stability of the hydrogel, which was stable up to 90 days of storage. The Scanning electron microscopy analysis revealed that hydrogels showed irregular surfaces and interconnected porous structures with accumulations of oil crystals distributed throughout the formulation. HMa 1% has a high moisture content (95.1%) and can absorb simulated wound fluid. Regarding the antimicrobial effects, HMa 1% reduced the growth of S. aureus ATCC 6538 in both in vitro conditions and in an ex vivo model of wounds using porcine skin. In addition, the dairy topical treatment of murine skin lesions with HMa 1% induced a significant reduction of the wound area, inflammation score, and bacterial load, as well as tissue re-epithelialization and modulation of inflammatory mediators. Therefore, hydrogel incorporated with MaEO 1% has excellent potential to be used in the pharmacotherapy of infected wounds.

ground tubers: assessment of antioxidant and antibacterial properties and cytotoxicity evaluation using zebrafish model

Oxidative stress disorders and diseases caused by drug-resistant bacteria have emerged as significant public health concerns. Plant-based medications like protease inhibitors are growing despite adverse effects therapies. Consecutively, in this study, trypsin inhibitors from Dioscorea bulbifera L. (DbGTi trypsin inhibitor) ground tubers were isolated, purified, characterized, and evaluated for their potential cytotoxicity, antibacterial, and antioxidant activities. DbGTi protein was purified by Q-Sepharose matrix, followed by trypsin inhibitory activity. The molecular weight of the DbGTi protein was found to be approximately 31 kDa by SDS-PAGE electrophoresis. The secondary structure analysis by circular dichroism (CD) spectroscopy revealed that the DbGTi protein predominantly comprises β sheets followed by α helix. DbGTi protein showed competitive type of inhibition with Vmax = 2.1372 × 10-1 μM/min, Km = 1.1805 × 102 μM, & Ki = 8.4 × 10-9 M and was stable up to 70 °C. DbGTi protein exhibited 58 % similarity with Dioscorin protein isolated from Dioscorea alata L. as revealed by LC-MS/MS analysis. DbGTi protein showed a non-toxic effect, analyzed by MTT, Haemolytic assay and in vivo studies on zebrafish model. DbGTi protein significantly inhibited K. pneumoniae and has excellent antioxidant properties, confirmed by various antioxidant assays. The results of anti-microbial, cytotoxicity and antioxidant assays demonstrate its bioactive potential and non-toxic nature.

A novel modified polydopamine based on melanin-like materials for antibacterial, hydrophobic, and ultraviolet protective of textiles

The development of environmentally friendly multifunctional auxiliaries for textile modification is the focus of attention in textile industry in recent years. Polydopamine is an important biological macromolecule and widely used in biomedicine, nanomaterials, material surface modification and other fields. In this study, the novel multifunctional melanin-like nanoparticles (Nha-PDA NPs) were prepared and used for antibacterial, hydrophobic, and UV protective of textiles. Nha-PDA NPs were prepared with dopamine (DA) and n-hexylamine (Nha) by simple autoxidation copolymerization. Nha-PDA NPs were bound to the fabric surface through the PDA structure in Nha-PDA NPs that has been widely confirmed to have strong adhesion on the surface of many materials. The modified fabrics, Nha-PDA NPs@Cotton, had good hydrophobic, antibacterial and UV protective properties. The static water contact angles of the modified fabrics could reach 120°. The antibacterial rates of Nha-PDA NPs@Cotton against E. coli and S. aureus were above 85 %. The maximum UPF value of the modified cotton was 362, indicating that the ultraviolet protection performance was excellent. The fabric modified with multifunctional melanin-like nanoparticle provides a green way for the multifunctional modification of textiles.

Synergistic Antibacterial Activity of Gallic Acid Based Chalcone Indl 2 by Inhibiting Efflux Pump Transporters

As a part of novel discovery of drugs from natural resources, present study was undertaken to explore the antibacterial potential of chalcone Indl-2 in combination with different group of antibiotics. MIC of antibiotics was reduced up to eight folds against the different cultures of E. coli by both chalcones. Among the two compounds, the i. e. 1-(3', 4,'5'-trimethoxyphenyl)-3-(3-Indyl)-prop-2-enone (6, Indl-2), a chalcone derivative of gallic acid (Indl-2) was better along with tetracycline (TET) worked synergistically and was found to inhibit efflux transporters as obvious by ethidium bromide efflux confirmed by ATPase assays and docking studies. In combination, Indl-2 kills the MDREC-KG4 cells, post-antibiotic effect (PAE) of TET was prolonged and mutant prevention concentration (MPC) of TET was also decreased. In-vivo studies revealed that Indl-2 reduces the concentration of TNF-α. In acute oral toxicity study, Indl-2 was non-toxic and well tolerated up-to dose of 2000 mg/kg. Perhaps, the study is going to report gallic acid derived chalcone as synergistic agent acting via inhibiting the primary efflux pumps.

Intelligent carboxymethyl cellulose composite films containing Garcinia mangostana shell anthocyanin with improved antioxidant and antibacterial properties

In this study, anthocyanin from Garcinia mangostana shell extract (Mse) was used as pH indicator to prepare intelligent carboxymethyl cellulose (CMC) based composite films. The structure and properties of the CMC-based composite films were characterized and discussed in detail. Results showed that the CMC-based composite films with Mse had excellent mechanical, antibacterial and antioxidant abilities. Especially, the carboxymethyl cellulose/corn starch/Garcinia mangostana shell extract (CMC/Cst/Mse) composite film had best mechanical properties (20.62 MPa, 4.06 % EB), lowest water vapor permeability (1.80 × 10-12 g·cm/(cm2·s·Pa)), excellent ultraviolet (UV) blocking performance, and the best antibacterial and antioxidant abilities. The pH sensitivity of composite films which had Mse obviously changed with time when the fish freshness was monitored at 25 °C. Given the good pH sensitivity of the composite films, it had significant potential for application of intelligent packaging film as a food packaging material to indicate the freshness of fish.

AgBiS2@CQDs/Ti nanocomposite coatings for combating implant-associated infections by photodynamic /photothermal therapy

Biofilm-mediated implant-associated infections are one of the most serious complications of implantation surgery, posing a grave threat to patient well-being. Effectively addressing bacterial infections is crucial for the success of implantation procedures. In this study, we prepared a bismuth sulfide silver@carbon quantum dot composite coating (AgBiS2@CQDs/Ti) on a medical titanium surface by surface engineering design to treat implant-associated infections. The photocatalytic/photothermal activity test results confirmed the excellent photogenerated ROS and photothermal properties of AgBiS2@CQDs/Ti under near-infrared laser irradiation. In vitro antibacterial and in vivo anti-infection experiments showed that the coating combined with photodynamic and photothermal therapies to eradicate bacteria and disrupt mature biofilms under 1064 nm laser irradiation. Consequently, AgBiS2@CQDs/Ti shows promise as an implant coating for treating implant-associated infections post-surgery, thereby enhancing the success rate of implantation procedures. This study also provides a new idea for combating implant-associated infections.

Antibacterial and antibiofilm potentials of Rumex dentatus root extract characterized by HPLC-ESI-Q-TOF-MS

The control of infections is one of the key strategies to treat cuts, wounds, lung, and skin infections. In this study the folkloric use of Rumex dentatus (R. dentatus) roots in the mentioned conditions was scientifically investigated. The methanolic (MeOH) crude extract of R. dentatus root was fractionated (n-hexane, ethyl acetate and water) via bioassay-guided method, and its antibacterial activity was evaluated using the agar well diffusion and Minimum inhibitory concentration (MIC) assays against clinical isolate of Pseudomonas aeruginosa (P. aeruginosa). The antibiofilm activity was measured using the crystal violet staining method. The crude extract, fractions and sub-fractions tested showed the MICs values ranging from 200 to 1000 μg/mL respectively. Among the fractions, notably, the water fraction exhibited the highest activity against P. aeruginosa. The water fraction was then subjected to thin layer chromatography (TLC). Following spectrometric analysis using HPLC-ESI-Q-TOF-MS, gallic acid and emodin were identified as the primary components within the same fraction, responsible for eliciting antibacterial and antibiofilm effects. The in-silico studies conducted with AutoDock Vina on the LasR protein, using both isolated gallic acid and emodin, confirm the binding affinity of these molecules to the active sites of the LasR protein that has regulatory role in building of biofilm formation and its pathogenicity. By scientifically validating the infection-controlling properties of R. dentatus, this research provides compelling evidence that supports its traditional use as reported in folklore. Moreover, this study contributes to our understanding of the plant's potential in managing infections, thereby substantiating its traditional therapeutic application in a scientific context.