Voltammetric ion-selective electrodes for the selective determination of cations and anions

A general theory has been developed for voltammetric ion sensing of cations and anions based on the use of an electrode coated with a membrane containing an electroactive species, an ionophore, and a supporting electrolyte dissolved in a plasticizer. In experimental studies, a membrane coated electrode is fabricated by the drop coating method. In one configuration, a glassy carbon electrode is coated with a poly(vinyl chloride) based membrane, which contains the electroactive species, ionophore, plasticizer and supporting electrolyte. In the case of a cation sensor, ionophore facilitated transfer of the target cation from the aqueous solution to the membrane phase occurs during the course of the reduction of the electroactive species present in the membrane in order to maintain charge neutrality. The formal potential is calculated from the cyclic voltammogram as the average of the reduction and oxidation peak potentials and depends on the identity and concentration of the ion present in the aqueous solution phase. A plot of the formal potential versus the logarithm of the concentration exhibits a close to Nernstian slope of RT/F millivolts per decade change in concentration when the concentration of K(+) and Na(+) is varied over the concentration range of 0.1 mM to 1 M when K(+) or Na(+) ionophores are used in the membrane. The slope is close to RT/2F millivolts for a Ca(2+) voltammetric ion-selective electrode fabricated using a Ca(2+) ionophore. The sensor measurement time is only a few seconds. Voltammetric sensors for K(+), Na(+), and Ca(2+) constructed in this manner exhibit the sensitivity and selectivity required for determination of these ions in environmentally and biologically important matrixes. Analogous principles apply to the fabrication of anion voltammetric sensors.

Socioeconomic deprivation adversely affects survival of patients with rectal cancer

Background

The aim was to examine the influence of socioeconomic deprivation on stage at presentation, perioperative mortality, permanent stoma rates and overall survival in patients with rectal cancer.

Methods

Data on patient demographics, mode and stage of presentation, and short- and longer-term outcomes were extracted from a database of patients with rectal cancer. Comparisons were made after stratification into quintiles of socioeconomic deprivation.

Results

In total 486 patients were identified. Fewer patients from the most deprived group than from the least deprived group underwent resectional surgery (79·2 versus 93 per cent; P = 0·005). Permanent stoma rates among patients who had surgery were 40·8 and 30 per cent respectively (P = 0·110). The overall 5-year survival rate was 32·8 per cent for the most deprived compared with 64·0 per cent for the least deprived patients (P < 0·001). Respective rates for those who underwent resectional surgery were 49·9 and 72 per cent (P = 0·030).

Conclusion

In rectal cancer, socioeconomic deprivation appears to be associated with poorer outcomes and survival. This has important implications for healthcare planning.

Tuning the Electrocrystallization Parameters of Semiconducting Co[TCNQ]2-Based Materials To Yield either Single Nanowires or Crystalline Thin Films

Electrocrystallization of single nanowires and/or crystalline thin films of the semiconducting and magnetic Co[TCNQ]2(H2O)2 (TCNQ=tetracyanoquinodimethane) charge-transfer complex onto glassy carbon, indium tin oxide, or metallic electrodes occurs when TCNQ is reduced in acetonitrile (0.1 M [NBu4][ClO4]) in the presence of hydrated cobalt(II) salts. The morphology of the deposited solid is potential dependent. Other factors influencing the electrocrystallization process include deposition time, concentration, and identity of the Co2+(MeCN) counteranion. Mechanistic details have been elucidated by use of cyclic voltammetry, chronoamperometry, electrochemical quartz crystal microbalance, and galvanostatic methods together with spectroscopic and microscopic techniques. The results provide direct evidence that electrocrystallization takes place through two distinctly different, potential-dependent mechanisms, with progressive nucleation and 3-D growth being controlled by the generation of [TCNQ]*- at the electrode and the diffusion of Co2+(MeCN) from the bulk solution. Images obtained by scanning electron microscopy reveal that electrocrystallization of Co[TCNQ]2(H2O)2 at potentials in the range of 0.1-0 V vs Ag/AgCl, corresponding to the [TCNQ]0/*- diffusion-controlled regime, gives rise to arrays of well-separated, needle-shaped nanowires via the overall reaction 2[TCNQ]*-(MeCN)+Co2+(MeCN)+2H2O right harpoon over left harpoon {Co[TCNQ]2(H2O)2}(s). In this potential region, nucleation and growth occur at randomly separated defect sites on the electrode surface. In contrast, at more negative potentials, a compact film of densely packed, uniformly oriented, hexagonal-shaped nanorods is formed. This is achieved at a substantially increased number of nucleation sites created by direct reduction of a thin film of what is proposed to be cobalt-stabilized {(Co2+)([TCNQ2]*-)2} dimeric anion. Despite the potential-dependent morphology of the electrocrystallized Co[TCNQ]2(H2O)2 and the markedly different nucleation-growth mechanisms, IR, Raman, elemental, and thermogravimetric analyses, together with X-ray diffraction, all confirmed the formation of a highly pure and crystalline phase of Co[TCNQ]2(H2O)2 on the electrode surface. Thus, differences in the electrodeposited material are confined to morphology and not to phase or composition differences. This study highlights the importance of the electrocrystallization approach in constructing and precisely controlling the morphology and stoichiometry of Co[TCNQ]2-based materials.

Electrocrystallization of Phase I, CuTCNQ (TCNQ = 7,7,8,8-Tetracyanoquinodimethane), on indium tin oxide and boron-doped diamond electrodes

The electrochemical reduction of TCNQ to TCNQ*- in acetonitrile in the presence of [Cu(MeCN)4]+ has been undertaken at boron-doped diamond (BDD) and indium tin oxide (ITO) electrodes. The nucleation and growth process at BDD is similar to that reported previously at metal electrodes. At an ITO electrode, the electrocrystallization of more strongly adhered, larger, branched, needle-shaped phase I CuTCNQ crystals is detected under potential step conditions and also when the potential is cycled over the potential range of 0.7 to -0.1 V versus Ag/AgCl (3 M KCl). Video imaging can be used at optically transparent ITO electrodes to monitor the growth stage of the very large branched crystals formed during the course of electrochemical experiments. Both in situ video imaging and ex situ X-ray diffraction and scanning electron microscopy (SEM) data are consistent with the nucleation of CuTCNQ taking place at a discrete number of preferred sites on the ITO surface. At BDD electrodes, ex situ optical images show that the preferential growth of CuTCNQ occurs at the more highly conducting boron-rich areas of the electrode, within which there are preferred sites for CuTCNQ formation.

Electrochemical studies of porphyrin-appended dendrimers

The electrochemical properties of porphyrin-appended dendrimers containing 2-, 4-, 8-, 16-, 32- and 64-porphyrin macrocycles in their free-base and zinc(II) forms have been investigated. Both series gave diffusional based voltammetric responses in dichloromethane. There was minimal effect of dendrimer generation on the redox potentials. Multiple pi-cation and anion radicals as well as dications and dianions were formed on the surface of the dendrimers on oxidation or reduction as appropriate, with each cyclic voltammetric wave representing electron transfer to or from multiple non-interacting porphyrin sites. Electrostatic interactions in the higher generation dendrimers result in kinetic effects being observed for the highly charged species generated when each porphyrin unit is doubly or triply oxidised. The number of electrons transferred on reduction or oxidation of the dendrimers was evaluated using steady-state microelectrode voltammetry. For the lower generations of species a good correlation was observed between numbers of electrons transferred and number of porphyrin entities per molecule; for the dendrimers containing 32 and 64 units, however, slight negative deviations were observed, possibly due to electrostatic interactions as the porphyrins become closer packed.

Effects of chewing gum on responses to routine painful procedures in children

In infants, sweet taste and sucking on a pacifier both have analgesic effects. Animal studies suggest that sweet taste may involve opioids, while rhythmic oral movements, as with a pacifier, increase the release of serotonin, which is involved in the gating of nociceptive afferents. The present study was designed to see if these effects produce an analgesic effect in children. Two studies were performed, during blood draws in a pediatric test center in 7- to 12-year-old children, and during vaccination at school in 9- to 11-year-old children. Using unsweetened or sweetened chewing gum, there were four groups: control, sweet, chew, and sweet plus chew. Overall, there was no effect of either sweet taste or chewing on pain responses. However, in boys sweet taste tended to increase pain ratings, but only in conjunction with chewing, while in girls sweet taste tended to decrease pain ratings in conjunction with chewing and increased them in the absence of chewing. Ratings of pain intensity and affective state were correlated. Affective state before the painful stimulus was related to pain response in the girls and in the boys in the test center, but not in the schools. In the schools, the presence of peers may have influenced the ratings.

99mTc-labeling of a hydrazinonicotinamide-conjugated vitronectin receptor antagonist useful for imaging tumors

This report describes the (99m)Tc labeling of a HYNIC-conjugated vitronectin receptor antagonist (SQ168 = [2-[[[5-[carboonyl]-2-pyridinyl]hydrazono]methyl]benzenesulfonic acid]-Glu(cyclo[Lys-Arg-Gly-Asp-D-Phe])-cyclo[Lys-Arg-Gly-Asp-D-Phe]). The ternary ligand complex [(99m)Tc(SQ168)(tricine)(TPPTS)] (RP593) was prepared using a non-SnCl(2)-containing formulation. The corresponding (99)Tc analogue, [(99)Tc]RP593, was also prepared and characterized by HPLC and LC-MS. A HPLC concordance experiment using RP593 and [(99)Tc]RP593 showed that the same technetium complex was prepared at both the tracer and macroscopic levels. The LC-MS data is completely consistent with the 1:1:1:1 composition for Tc:SQ168:tricine:TPPTS and provides direct evidence that the two radiometric peaks in the radio-HPLC chromatogram of RP593 are indeed due to the resolution of diastereomers. In an in vitro receptor binding assay, [(99)Tc]RP593 was shown to have comparable binding affinity for the vitronectin receptor to that of SQ168 itself.

Towards developing a non-SnCl2 formulation for RP444, a new radiopharmaceutical for thrombus imaging

There are many factors influencing the yield and radiochemical purity (RCP) of the radiopharmaceutical RP444. These include heating temperature, heating time, pH, the use of a buffering agent and a bulking agent, as well as the component (XV066, tricine, TPPTS, and Na99mTcO4) concentration. Through a series of radiolabeling experiments, we found that a formulation comprised of 20 microg of XV066, 6.5 mg of tricine, 40 mg of mannitol, 5 mg of TPPTS, and 0.1 mg of Pluronic acid dissolved in 1.0 mL of 250 mM succinate buffer (pH 5.0) gives the best RCP for RP444. The formulation can be lyophilized to form a stable crystal "cake". The radiolabeling is achieved by adding 1.5 mL generator eluant (33-133 mCi of Na99mTcO4) to a lyophilized vial and heating the reaction mixture at 100 degrees C for 10 min. Using this formulation, RP444 is prepared consistently in high yield with RCP > or = 90%. Formation of [99mTc]colloid is minimal (< 0.5%).

Phase change in tetraphenylphosphonium perchlorate

The title compound, C(24)H(20)P(+).ClO(4)(-), undergoes a sudden reversible phase change in the region of 173-180 K which involves ordering of three quarters of the perchlorate anions.

Solid formulations of binucleate Rhizoctonia isolates suppress Rhizoctonia solani and Pythium ultimum in potting medium

Two isolates of binucleate Rhizoctonia spp., previously selected for efficacy in suppression of Rhizoctonia solani and Pythium spp., as well as plant growth promotion, were incorporated into various solid substrate formulations. These formulated products were assayed at three doses in three glass-house experiments for biocontrol of damping-off diseases in Capsicum annuum. R. solani anastomosis group 4 or Pythium ultimum var. sporangiiferum were incorporated into pasteurized potting medium with each formulated binucleate Rhizoctonia product. All formulations were effective against both pathogens in at least two experiments, but some formulations of one isolate of binucleate Rhizoctonia did not give consistent control of R. solani in one experiment. The most consistent formulation, which provided control of both pathogens at all doses of binucleate Rhizoctonia, was the simple substrate of rice hulls. The implications for commercialization of a biocontrol product are discussed.

99mTc-labeling of hydrazones of a hydrazinonicotinamide conjugated cyclic peptide

Eight HYNICtide hydrazones (three with aliphatic substituents and five with aromatic groups) were studied for their potential use as the final intermediate for preparation of RP444, a new radiopharmaceutical under development for imaging thrombosis. The goal of this study is to screen various hydrazones through stability testing and radiolabeling and find those which are able to remain stable without significant degradation in the manufacturing process and at the same time are reactive to produce enough free hydrazine in situ for successful (99m)Tc-labeling. In an initial screening study, only hydrazones 6 and 8, which contain aliphatic substituents, gave satisfactory (>/=90%) yields of RP444 using 50 degrees C and 30 min of heating. However, their solution instability excludes them from being used as commercial reagents. Hydrazones 1 and 4 gave >/=90% yields when the reaction mixtures were heated at 80 degrees C for 30 min. Both hydrazone 1 and hydrazone 4 can be used as the final intermediate for preparation of RP444. The combination of 40 mg of tricine, 1-10 mg of TPPTS, 20-40 microg of hydrazone 1 or 4 for 50 mCi of [(99m)Tc]pertechnetate, 20-50 microg of stannous chloride, pH 4.5 +/- 0.5, and heating at 80 degrees C for 30 min gives the best yield for RP444. It is surprising that hydrazones 1 and 4 have both the solution stability with respect to decomposition and to reaction with aldehydes and ketones and yet are able to hydrolyze in situ to produce enough free HYNICtide for the (99m)Tc-labeling.

Biocontrol of Rhizoctonia solani and Pythium ultimum on Capsicum by Trichoderma koningii in potting medium

Two isolates of Trichoderma koningii were evaluated for efficacy in control of damping-off diseases in seedlings of Capsicum annuum grown in pasteurized potting medium in a glasshouse. A selected isolate of binucleate Rhizoctonia and two fungicides were also included as standards for control of Rhizoctonia solani and Pythium ultimum var. sporangiiferum. Both isolates of T. koningii reduced seedling death caused by R. solani in one of two experiments, and by P. u. sporangii-ferum in two of three experiments. Neither isolate of T. koningii suppressed damping-off caused by either pathogen as consistently as the binucleate Rhizoctonia or fungicides. The implications of these results for commercial disease management are discussed.

RP463: a stabilized technetium-99m complex of a hydrazino nicotinamide derivatized chemotactic peptide for infection imaging

A HYNIC-conjugated chemotactic peptide (fMLFK-HYNIC) was labeled with (99m)Tc using tricine and TPPTS as coligands. The combination of fMLFK-HYNIC, tricine, and TPPTS with (99m)Tc produced a ternary ligand complex [(99m)Tc(fMLFK-HYNIC)(tricine)(TPPTS)] (RP463). RP463 was synthesized either in two steps, in which the binary ligand complex [(99m)Tc(fMLFK-HYNIC)(tricine)(2)] (RP469) was formed first and then reacted with TPPTS, or in one step by direct reduction of [(99m)Tc]pertechnetate with stannous chloride in the presence of fMLFK-HYNIC, tricine, and TPPTS. The radiolabeling yield for RP463 was usually >/=90% using 10 microg of fMLFK-HYNIC and 100 mCi of [(99m)Tc]pertechnetate. Unlike RP469, which decomposed rapidly in the absence of excess tricine coligand, RP463 was stable in solution for at least 6 h. [(99)Tc]RP463 was prepared and characterized by HPLC and electrospray mass spectrometry. In an in vitro assay, [(99)Tc]RP463 showed an IC(50) of 2 nM against binding of [(3)H]fMLF to receptors on PMNs. [(99)Tc]RP463 also induces effectively the superoxide release of polymorphonuclear leukocytes (PMNs) with an EC(50) value of 0.2 +/- 0.2 nM. The localization of RP463 in the infection foci was assessed in a rabbit infection model. RP463 was cleared from the blood faster than RP469 and was excreted mainly through the renal system. As a result of rapid blood clearance and increased uptake, the target-to-background ratios continuously increased from 1.5 +/- 0.2 at 15 min postinjection to 7.5 +/- 0.4 at 4 h postinjection. Visualization of the infected area could be as early as 2 h. A transient decrease in white blood cell count of 35% was observed during the first 30 min after injection of the HPLC-purified RP463 in the infected rabbit. This suggests that future research in this area should focus on developing highly potent antagonists for chemotactic peptide receptor or other receptors on PMNs and monocytes.

Oral contraceptives and oral antibiotics: interactions and advice in an accident and emergency setting

OBJECTIVE

(1) To determine what advice, if any, would be given by accident and emergency (A&E) doctors to women who were taking the combined oral contraceptive pill (OCP) if they had been issued with broad spectrum antibiotics and (2) after an audit programme had been instigated, whether appropriate advice was given to such women.

METHODS

A questionnaire was circulated to 12 doctors working in the Exeter A&E department to assess their level of knowledge in prescribing antibiotics to women taking the OCP. Notes of women aged 15-50 who had been prescribed broad spectrum antibiotics were examined to see if a contraceptive history had been taken. If the patient was found to be taking the combined OCP it was noted whether documented advice had been given about using an additional form of contraception. Six months later after two education sessions had been held, prescriptions and notes were examined. A patient education leaflet was produced to be given to these women, indicating what additional precautions should be taken after having been prescribed antibiotics.

SETTING

The A&E department of a busy district general hospital.

SUBJECTS

Women aged 15-50 who had been issued with broad spectrum antibiotics.

RESULTS

The level of knowledge in regard to contraceptive advice given to women taking the OCP among doctors working in an A&E department was poor. However, after educational sessions and the production of a patient information leaflet, there was an improvement in women receiving correct advice.

CONCLUSIONS

The clinical significance of drug interactions between oral contraceptives and antibiotics indicates the importance of asking a full contraceptive drug history of any woman of childbearing age and documenting this in the notes. Regular audit of this topic is needed to keep it at the front of doctors' minds.

A novel ternary ligand system for 99mTc-labeling of hydrazino nicotinamide-modified biologically active molecules using imine-N-containing heterocycles as coligands

A hydrazinonicotinamide-functionalized cyclic platelet glycoprotein IIb/IIIa (GPIIb/IIIa) receptor antagonist [HYNICtide, cyclo(D-Val-NMeArg-Gly-Asp-Mamb(5-(6-(6-hydrazinonicotina mido)hexanamide)))] was labeled with 99mTc using tricine and a series of imine-N-containing heterocycles as coligands. The imine-N-containing heterocycles include N-omega-Acetylhistamine (HIS-AC), N-(2-hydroxyethyl)isonicotinamide (ISONIC-HE), isonicotinic acid (ISONIC), isonicotinoyl-L-aspartic acid dimethyl ester (ISONIC-L-Asp-OMe2), 4-methyl-5-thiazoleethanol (MTE), nicotinic acid (NIC), 3-nitro-1,2,4-triazole (NTZ), 4-pyridylacetic acid (PA), 4-pyridineethanesulfonic acid (PES), and 3-pyridinesulfonic acid (PSA). The synthesis of these new ternary ligand [99mTc]HYNICtide complexes can be performed in one or two steps in high yield and high specific activity (>/=10 000 Ci/mmol HYNICtide). For example, the reaction of HYNICtide, [99mTc]pertechnetate, nicotinic acid, stannous chloride, and tricine at pH approximately 5 and 100 degreesC for 20 min results in the complex [99mTc(HYNICtide)(tricine)(NIC)] in >/=90% yield as determined by radio-HPLC. It was found that ternary ligand technetium complexes, [99mTc(HYNICtide)(tricine)(L)] (L = ISONIC, ISONIC-L-Asp-OMe2, ISONIC-HE, MTE, PA, PES, and PSA) are formed as equal mixtures of two isomeric forms. Complex [99mTc(HYNICtide)(tricine)(L)] (L = HIS-AC and NTZ) showed more than two well-resolved radiometric peaks at the retention times of interest, suggesting that they may have more than two forms in solution due to different bonding modalities of HIS-AC and NTZ. By a chirality experiment, it was found that the presence of two radiometric peaks is a result of the resolution of the two diastereomers which are formed by the combination of the chiral HYNICtide and the chiral technetium chelate. The formation of two diastereomers was also observed when a chiral imine-N-containing coligand was used for the radiolabeling of HYNIC-BA. The new ternary ligand [99mTc]HYNICtide complexes were found to be stable for up to 6 h in the reaction mixture. The high solution stability is attributed to their kinetic inertness. The composition of these complexes was determined to be 1:1:1:1 for Tc:HYNICtide:L:tricine (L = imine-N-containing heterocycles) through a series of mixed ligand experiments on the tracer (99mTc) level. The lipophilicity of the ternary ligand [99mTc]HYNICtide complexes can be systematically varied by the choice of polyaminocarboxylate and imine-N-containing coligands. Using the combination of tricine and an imine-N-containing coligand, HYNIC-derivatized peptides or other small molecules can be labeled with 99mTc in high specific activity and high stability for potential use as radiopharmaceuticals.