Chromatographic and traditional albumin isotherms on cellulose: a model for wound protein adsorption on modified cotton

Albumin is the most abundant protein found in healing wounds. Traditional and chromatographic protein isotherms of albumin binding on modified cotton fibers are useful in understanding albumin binding to cellulose wound dressings. An important consideration in the design of cellulosic wound dressings is adsorption and accumulation of proteins like albumin at the solid-liquid interface of the biological fluid and wound dressing fiber. To better understand the effect of fiber charge and molecular modifications in cellulose-containing fibers on the binding of serum albumin as observed in protease sequestrant dressings, albumin binding to modified cotton fibers was compared with traditional and chromatographic isotherms. Modified cotton including carboxymethylated, citrate-crosslinked, dialdehyde and phosphorylated cotton, which sequester elastase and collagenase, were compared for their albumin binding isotherms. Albumin isotherms on citrate-cellulose, cross-linked cotton demonstrated a two-fold increased binding affinity over untreated cotton. A comparison of albumin binding between traditional, solution isotherms and chromatographic isotherms on modified cellulose yielded similar equilibrium constants. Application of the binding affinity of albumin obtained in the in vitro protein isotherm to the in vivo wound dressing uptake of the protein is discussed. The chromatographic approach to assessment of albumin isotherms on modified cellulose offers a more rapid approach to evaluating protein binding on modified cellulose over traditional solution approaches.

Flame retardant behavior of polyelectrolyte-clay thin film assemblies on cotton fabric

Cotton fabric was treated with flame-retardant coatings composed of branched polyethylenimine (BPEI) and sodium montmorillonite (MMT) clay, prepared via layer-by-layer (LbL) assembly. Four coating recipes were created by exposing fabric to aqueous solutions of BPEI (pH 7 or 10) and MMT (0.2 or 1 wt %). BPEI pH 10 produces the thickest films, while 1 wt % MMT gives the highest clay loading. Each coating recipe was evaluated at 5 and 20 bilayers. Thermogravimetric analysis showed that coated fabrics left as much as 13% char after heating to 500 degrees C, nearly 2 orders of magnitude more than uncoated fabric, with less than 4 wt % coming from the coating itself. These coatings also reduced afterglow time in vertical flame tests. Postburn residues of coated fabrics were examined with SEM and revealed that the weave structure and fiber shape in all coated fabrics were preserved. The BPEI pH 7/1 wt % MMT recipe was most effective. Microcombustion calorimeter testing showed that all coated fabrics reduced the total heat release and heat release capacity of the fabric. Fiber count and strength of uncoated and coated fabric are similar. These results demonstrate that LbL assembly is a relatively simple method for imparting flame-retardant behavior to cotton fabric. This work lays the foundation for using these types of thin film assemblies to make a variety of complex substrates (foam, fabrics, etc.) flame resistant.

A three-dimensional finite element model of maximal grip loading in the human wrist

The aim of this work was to create an anatomically accurate three-dimensional finite element model of the wrist, applying subject-specific loading and quantifying the internal load transfer through the joint during maximal grip. For three subjects, representing the anatomical variation at the wrist, loading on each digit was measured during a maximal grip strength test with simultaneous motion capture. The internal metacarpophalangeal joint load was calculated using a biomechanical model. High-resolution magnetic resonance scans were acquired to quantify bone geometry. Finite element analysis was performed, with ligaments and tendons added, to calculate the internal load distribution. It was found that for the maximal grip the thumb carried the highest load, an average of 72.2 +/- 20.1 N in the neutral position. Results from the finite element model suggested that the highest regions of stress were located at the radial aspect of the carpus. Most of the load was transmitted through the radius, 87.5 per cent, as opposed to 12.5 per cent through the ulna with the wrist in a neutral position. A fully three-dimensional finite element analysis of the wrist using subject-specific anatomy and loading conditions was performed. The study emphasizes the importance of modelling a large ensemble of subjects in order to capture the spectrum of the load transfer through the wrist due to anatomical variation.

The relation between MRI neuroactivation changes and response rate on a word-fluency task

This study investigated the functional magnetic resonance imaging response of the left premotor cortex activated during a word-fluency task. We hypothesized that a cortical region crossing the boundary between Brodmann's areas 44 and 6 would show bias toward output during word generation (i.e., the more words generated the greater the activation), supporting the view that this region is involved in the motor planning of speech rather than the search component of word generation. Ten participants were shown letters with different word-generational frequencies, and these were correlated with magnetic resonance signal changes over the region. Significant differences (p = .05) were found in the neuroactivation changes between groups of letters associated with high and low overt frequencies. This finding supports our hypothesis concerning the role of areas 44 and 6 in word-generation tasks.

The ferromagnetic pillow: a potential MR hazard not detectable by a hand-held magnet

This paper describes an incident in which an apparently normal hospital pillow became a ferromagnetic missile when brought into the proximity of a 1.5 T MR system owing to a fine internal spring system within the pillow. Measurements revealed that the 1 kg pillow reached a maximum velocity of 33.7 km h(-1) after undergoing a maximum acceleration of 9.9g. Non-pathological cervical spines should sustain the measured forces and torques without significant injury. However, the effect could be injurious or even fatal to patients suffering from an existing cervical instability, for example due to rheumatoid arthritis. Of more general concern is the fact that the use of a powerful hand-held magnet did not reveal the presence of ferromagnetic components in this instance. Large objects containing sparsely distributed ferromagnetic materials may not be deflected by such a magnet but could still represent a hazard in the MR environment.

Method of determination of three dimensional index finger moment arms and tendon lines of action using high resolution MRI scans

High-resolution MRI scans, in conjunction with CAD software, were used to determine the three-dimensional moment arms and force vector direction cosines for 11 structures passing the interphalangeal and metacarpophalangeal joints of the index finger. The results are presented for five different angles of joint flexion for a single subject. The moment arm data obtained differ from previous studies, where results have been derived from tendon excursion techniques or geometrical models. These dissimilarities have been accounted for by the differences in experimental techniques.

Thermal injuries associated with MRI

Most physicians are aware of the absolute contraindications to magnetic resonance imaging (MRI). However, less familiar is the potential for an MRI-induced thermal or electrical burn associated with electrical monitoring devices. Although detailed studies concerning the burn hazard in MRI have not been reported, it is widely believed that direct electromagnetic induction in looped cables associated with the patient is responsible for the excessive heating and it is on this theory that present guidelines are based. Recent reports have however indicated that other mechanisms may cause the heating of metal, either in or on the patient. This document reviews numerous reported burn injuries sustained during MRI and addresses the underlying heating mechanisms possibly causing these events.

Investigation of the factors responsible for burns during MRI

Numerous reported burn injuries have been sustained during clinical MRI procedures. The aim of this study was to investigate the possible factors that may be responsible for such burns. Experiments were performed to investigate three possible mechanisms for causing heating in copper wire during MRI: direct electromagnetic induction in a conductive loop, induction in a resonant conducting loop, and electric field resonant coupling with a wire (the antenna effect). Maximum recorded temperature rises were 0.6 degrees C for the loop, 61.1 degrees C for the resonant loop, and 63.5 degrees C for the resonant antenna. These experimental findings suggest that, contrary to common belief, it is unlikely that direct induction in a conductive loop will result in thermal injury. Burn incidents are more likely to occur due to the formation of resonant conducting loops and from extended wires forming resonant antenna. The characteristics of resonance should be considered when formulating safety guidelines.

Estimation of torque on mechanical heart valves due to magnetic resonance imaging including an estimation of the significance of the Lenz effect using a computational model

Mitral and aortic valve replacement is a procedure which is common in cardiac surgery. Some of these replacement valves are mechanical and contain moving metal parts. Should the patient in whom such a valve has been implanted be involved in magnetic resonance imaging, there is a possible dangerous interaction between the moving metal parts and the static magnetic field due to the Lenz effect. Mathematical models of two relatively common forms of single-leaflet valves have been derived and the magnitude of the torque which opposes the motion of the valve leaflet has been calculated for a valve disc of solid metal. In addition, a differential model of a ring-strengthener valve type has been considered to determine the likely significance of the Lenz effect in the context of the human heart. For common magnetic field strengths at present, i.e. 1 to 2 T, the effect is not particularly significant. However, there is a marked increase in back pressure as static magnetic field strength increases. There are concerns that, since field strengths in the range 3 to 4 T are increasingly being used, the Lenz effect could become significant. At 5 to 10 T the malfunction of the mechanical heart valve could cause the heart to behave as though it is diseased. For unhealthy or old patients this could possibly prove fatal.

Potential MR hazard to patients with metallic heart valves: the Lenz effect

The Lenz effect on the motion of metal containing moving parts of artificial heart valves has not been considered to date. In this paper the basic theory is outlined and a simple model applied to estimate worst-case forces on such valves. The results indicate a potential for forces over 100 times greater than for the more widely recognized ferromagnetic interation. Resistive pressure effects comparable to cardiac pressure differences may occur for such valves in the mitral position even at fields as low as 1.5 T. The effect will increase linearly with field strength. Additional monitoring and perhaps even exclusion of such patients may be prudent, even at 1.5 T.

Early 1H magnetic resonance spectroscopy of acute head injury: four cases

In an attempt to examine in vivo the early metabolic consequences of severe acute head injury, 1H MRS was performed in four patients from 8 to 25 h (mean 15 h) following trauma. In three of these patients, decompressive surgery was performed 4-5 h prior to the MRS. High levels of lactate (area of lactate peak >50% of the mean areas of the NAA, choline-containing, and creatine-containing compound peaks) were found at 8 h posttrauma in the one patient who was not operated on and at 10 h posttrauma in one of the patients who underwent surgery. In the other two postoperative patients, at 18 and 25 h after trauma, lactate levels were found to be low (lactate peak <20% of the mean area of the other three peaks). In the one patient who had a follow-up at 6 days and who had the largest initial lactate levels, these remained high. These findings suggest that high levels of lactate may not be an inevitable consequence of severe head injury and that similar MRS studies should be performed on each individual patient before therapies to reduce lactate are considered. There appeared to be no correlation between the relative amounts of lactate and outcome.

Structure and functional relationships in human pur H

1. The human pur H (ATIC) gene encoding a bifunctional protein, hPurH, which carries the penultimate and final enzymatic activities of the purine nucleotide synthesis pathway, AICARFT & IMPCH, has been cloned and sequenced. The gene product, hPurH has been overexpressed in E. coli, purified to homogeneity and crystallized. 2. The human pur H gene lies on chromosome 2, between band q34 and q35. There is at least one intron of 278 bp near the 5' end. 3. Truncation mutant studies demonstrate two non-overlapping functional domains in the protein arranged as indicated in Figure 5. The existence of a linker or interaction region between the catalytic domains remains to be established. 4. Cleland-type kinetic inhibition experiments indicate that the AICARFT reaction is of the ordered, sequential type with the reduced folate cofactor binding first. 5. The reaction has a broad pH optimum in the alkaline range, with a maximum at about pH 8.2. 6. Preliminary transient phase kinetic studies show the presence of a "burst" indicating that a late step in the reaction sequence is rate limiting. 7. A PurH crystal structure is that of a dimer, with a putative single binding site for the reduced folate cofactor formed using elements from each of the monomer subunits. Probable binding sites for AICAR and FAICAR can be identified on each monomer. 8. Equilibrium sedimentation studies show hPurH apoprotein to be a monomer:dimer equilibrium mixture with a kD of 0.55 uM. 9. The crystal structure has permitted identification of a number of candidate amino acid residues likely to be involved in catalysis and/or substrate binding. Among these, we have thus far completed studies on two, Lysine 265 and Histidine 266. These appear to be critically involved in the AICARFT reaction, although whether their role(s) are in catalysis or binding remains to be determined.

Errors in MR stereotaxy due to undetected extraneous metal objects

MR stereotaxic procedures are being increasingly used, particularly in functional neurosurgery where very high levels of localization accuracy are required. Whilst many studies have investigated intrinsic causes of non-linearity, potential errors due to an extrinsic cause are not generally appreciated. It is not uncommon to find objects such as hair clips, paper clips and pins inside high-field magnets. They can remain undetected for long periods because they can reach positions not open to visual inspection and because they often do not produce observable deterioration in routine image quality. In this study we measured the maximum absolute positional shifts caused by such objects and found that these can be significant (> 1 mm, even up to 200 mm from one such object). Additional measurements were performed using an MR compatible Leksell stereotaxic frame to calculate actual stereotaxic coordinate errors. The encompassing nature of the frame is such that some degree of compensation for such nonlinearities is inherent, and so errors for areas of the brain more proximal to the object are found to be reduced but not eliminated. Stereotaxic coordinate errors will not be reduced in nonencompassing designs and in frameless stereotaxy. The prevalence of such objects in clinical systems and the measures required to detect their presence are discussed. The need for quality control testing before each stereotaxic procedure is highlighted.

Early changes in peritumorous oedema and contralateral white matter after dexamethasone: a study using proton magnetic resonance spectroscopy

AIMS

To study the mechanism of action of steroids in patients with peritumorous oedema.

METHODS

To investigate early cerebral metabolic changes proton magnetic resonance spectroscopy (1H-MRS) was used before and 11 to 14 hours after treatment with dexamethasone (12 mg oral loading and 4 mg four times daily maintenance). Nine patients (two men, seven women, mean age 54) with pronounced oedema associated with various intracranial tumours (two astrocytomas, three meningiomas, two glioblastoma, and two metastases) were examined using MRI and MRS. SE1500/135 volume selected MRS (mean volume 21 ml) were performed on an oedematous region and a contralateral region. All spectra were acquired with and without water suppression. Metabolite peak area ratios were determined.

RESULTS

Regions of oedema had significantly (P < 0.01) higher unsuppressed water than the contralateral regions, as expected. There was no change at this early time point after dexamethasone. The ratio of the area of choline containing compounds to that creatine and phosphocreatine compounds was determined after which the serial ratios of these before and after were calculated (a serial ratio of 1.0 would indicate no change in the choline to creatine ratios after steroid administration). The mean serial ratios for the area of oedema were 1.02 (SEM 0.08) and 1.10 (0.08) for the contralateral volume of interest, indicating no significant changes. However, significant changes (P < 0.02) were found in the N-acetyl-aspartate (NAA)/choline serial ratios (0.86 (0.06) in the area of oedema, 1.20 (0.10) in contralateral brain) and the NAA/creatine serial ratios (0.86 (0.08) for the oedema, 1.25 (0.11) in contralateral brain).

CONCLUSIONS

Such rapid changes may be explained either by relatively large alterations in the relaxation characteristics of NAA or, more controversially, by actual changes in the amounts of NAA. It is proposed that steroids act primarily by causing early metabolic changes that are later expressed in improvements in intracranial volume relations.

Habituation-like effects cause a significant decrease in response in MRI neuroactivation during visual stimulation

A wide range of rest/stimulus cycle durations (40-360 sec) is reported to have been used by various groups for MRI neuroactivation studies of the visual cortex. In this paper we demonstrate a clear habituation-like response for longer cycle durations which results in a halving of apparent activation between cycle durations of 138 and 276 sec. This has important implications, not only in terms of optimizing the technique, but also in providing an insight into the underlying physiological mechanisms.

Single-chain recombinant human cytomegalovirus protease. Activity against its natural protein substrate and fluorogenic peptide substrates

We report here the production of active recombinant single-chain human cytomegalovirus protease in Escherichia coli and development of a continuous assay for this protease. In order to produce the human cytomegalovirus (HCMV) protease for structural studies and accurate kinetic analysis, mutation of alanine 143 at an internal cleavage site was introduced to prevent auto-proteolysis. The resulting soluble 29-kDa A143Q protease was purified to homogeneity as a stable single-chain protein by hydrophobic interaction and ionic-exchange chromatography. The in vivo protein substrate, assembly protein precursor, was also expressed and purified for activity studies. To develop a continuous protease assay, fluorescent synthetic peptide substrates similar to the cleavage sequence P5 to P5' of the maturation site containing anthranilic acid and nitrotyrosine as a resonance energy transfer donor-acceptor pair were designed. Purified HCMV A143Q protease cleaved the recombinant assembly protein precursor with Km and kcat values of 3.0 +/- 1.0 microM and 13.3 +/- 1.6 min-1. The Km for peptide substrates is at least 45-fold higher than for the natural protein substrate, but the kcat values are similar. A sensitive assay was developed using fluorescent peptide substrates, which can detect nM HCMV protease activity.