Self-discharge of electrochemical capacitors based on soluble or grafted quinone

The self-discharge of hybrid electrochemical capacitors based on the redox activity of electrolyte additives or grafted species to the electrode material is investigated simultaneously for the cell and each individual electrode.

In situ formation of bromobenzene diazonium ions and their spontaneous reaction with carbon-coated LiFePO4 in organic media

In this study, the diazotization of bromoaniline in the presence of carbon-coated LiFePO₄ and the grafting of bromobenzene moieties are investigated.

Increasing the Affinity Between Carbon-Coated LiFePO4/C Electrodes and Conventional Organic Electrolyte by Spontaneous Grafting of a Benzene-Trifluoromethylsulfonimide Moiety

The grafting of benzene-trifluoromethylsulfonimide groups on LiFePO4/C was achieved by spontaneous reduction of in situ generated diazonium ions of the corresponding 4-amino-benzene-trifluoromethylsulfonimide. The diazotization of 4-amino-benzene-trifluoromethylsulfonimide was a slow process that required a high concentration of precursors to promote the spontaneous grafting reaction. Contact angle measurements showed a hydrophilic surface was produced after the reaction that is consistent with grafting of benzene-trifluoromethylsulfonimide groups. Elemental analysis data revealed a 2.1 wt % loading of grafted molecules on the LiFePO4/C powder. Chemical oxidation of the cathode material during the grafting reaction was detected by X-ray diffraction and quantified by inductively coupled plasma atomic emission spectrometry. Surface modification improves the wettability of the cathode material, and better discharge capacities were obtained for modified electrodes at high C-rate. In addition, electrochemical impedance spectroscopy showed the resistance of the modified cathode was lower than that of the bare LiFePO4/C film electrode. Moreover, the modified cathode displayed superior capacity retention after 200 cycles of charge/discharge at 1 C.

Electrochemical formation of an ultrathin electroactive film from 1,10-phenanthroline on a glassy carbon electrode in acidic electrolyte

The electrochemical reduction of 1,10-phenanthroline in aqueous acidic electrolyte at a glassy carbon electrode led to the covalent modification of the electrode. Thereafter, the deposited film can be switched to an electroactive form by electrochemical oxidation. An electroactive film can be also generated by alternate reductive and oxidative voltammetric cycling in a 1,10-phenanthroline/aqueous sulfuric acid solution. First, the electrochemical procedure for the formation of a film is presented. Second, the morphology and chemical structure of 1,10-phenanthroline coatings were investigated by atomic force microscopy, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy, and electrochemical techniques. The ultrathin (<15 nm) electrodeposited films consist of oligomeric species. The coatings deposited in alternate and/or continuous reductive and oxidative steps contain oxygen atoms incorporated into the oligomer backbone. The preliminary results point out the formation of a dione derivative that is responsible for the electroactivity of the grafted layer.

Harvested white-tailed deer as sentinel hosts for early establishing Ixodes scapularis populations and risk from vector-borne zoonoses in southeastern Canada

Due to recent establishment of the blacklegged tick, Ixodes scapularis Say, in southeastern Canada, tick-borne zoonoses (Lyme disease, human granulocytotropic anaplasmosis, and babesiosis) are of growing concern for public health. Using white-tailed deer (Odocoileus virginianus) culled in southwestern Quebec during 2007-2008, we investigated whether hunter-killed deer could act as sentinels for early establishing tick populations and for tick-borne pathogens. Accounting for environmental characteristics of culling sites, and age and sex of deer, we investigated whether their tick infestation levels could identify locations of known tick populations detected in active surveillance, presumed tick populations detected by passive surveillance, or both. We also used spatial cluster analyses to identify spatial patterns of tick infestation and occurrence of tick-borne zoonoses infection in ticks collected from the deer. Adult ticks were found on 15% of the 583 deer examined. Adult male deer had the greatest number (approximately 90%) of adult ticks. Overall, 3, 15, and 0% of the ticks collected were polymerase chain reaction (PCR)-positive for Borrelia burgdorferi, Anaplasma phagocytophilum, and Babesia microti, respectively. Our statistical analyses suggest that sex and age of deer, temperature, precipitation, and an index of tick dispersion by migratory birds were significantly associated with tick infestation levels. Cluster analysis identified significant clusters of deer carrying ticks PCR-positive for A. phagocytophilum, and for deer carrying two or more I. scapularis. Our study suggests that hunter-killed deer may be effective as sentinels for emerging areas of tick-borne anaplasmosis. They may have limited use as sentinels for early emerging I. scapularis tick populations and emerging Lyme disease risk.

Localized in situ generation of diazonium cations by electrocatalytic formation of a diazotization reagent

A new one-step electrochemical approach for the localized generation of diazonium cations in the diffusion layer of an electrode by taking advantage of the electrocatalytic properties of the electrode for the formation of the diazotization agent (nitrite) is proposed. Once nitrite anions are formed by electrocatalytic reduction of nitrate, they immediately react with an arylamine to produce the corresponding diazonium cations, which can be electrochemically readily reduced at the electrode surface. By this method, spontaneous modification of the electrode surface can be avoided. Furthermore, because the potential of the electrochemical nitrate reduction depends strongly on the nature of the electrode material, we also demonstrate that selective grafting can be achieved on a surface, which consists of two different materials: copper-gold or copper-glassy carbon substrates.

Catechol-modified activated carbon prepared by the diazonium chemistry for application as active electrode material in electrochemical capacitor

Activated carbon (Black Pearls 2000) modified with electroactive catechol groups was evaluated for charge storage application as active composite electrode material in an aqueous electrochemical capacitor. High surface area Black Pearls 2000 carbon was functionalized by introduction of catechol groups by spontaneous reduction of catechol diazonium ions in situ prepared in aqueous solution from the corresponding amine. Change in the specific surface area and pore texture of the carbon following grafting was monitored by nitrogen gas adsorption measurements. The electrochemical properties and the chemical composition of the catechol-modified carbon electrodes were investigated by cyclic voltammetry. Such carbon-modified electrode combines well the faradaic capacitance, originating from the redox activity of the surface immobilized catechol groups, to the electrochemical double layer capacitance of the high surface area Black Pearls carbon. Due to the faradaic contribution, the catechol-modified electrode exhibits a higher specific capacitance (250 F/g) than pristine carbon (150 F/g) over a potential range of -0.4 to 0.75 V in 1 M H(2)SO(4). The stability of the modified electrode evaluated by long-time charge/discharge cycling revealed a low decrease of the capacitance of the catechol-modified carbon due to the loss of the catechol redox activity. Nonetheless, it was demonstrated that the benefit of redox groups persists for 10, 000 constant current charge/discharge cycles.

Bioeconomic modelling of raccoon rabies spread management impacts in Quebec, Canada

Beginning in 2006, point infection control operations and aerial distribution of oral rabies vaccines along the US border were performed in Quebec, Canada, to control the potential spread of raccoon rabies. A benefit-cost analysis assessed the economic efficiency of this rabies control programme into the future. In this study, a mathematical simulation model was used to determine the potential spread of raccoon rabies from the 2006 index case, and incidence rates of human post-exposure prophylaxis (PEP), animal testing and human exposure investigations were calculated. Benefits were calculated as the potential savings from reduced numbers of human PEP, animal testing and human exposure investigations owing to control, which ranged from $47 million to $53 million. Programme cost scenarios were based on projections of total expenditures, which ranged from $33 million to $49 million. Economic efficiency was indicated for approximately half of the modelled scenarios, with the greatest benefit-cost ratios resulting from reduced future programme costs.

Formation and reactivity of 3-diazopyridinium cations and influence on their reductive electrografting on glassy carbon

The in situ generation of 3-diazonium cations from 3-aminopyridine and their subsequent stability under experimental conditions used for electrografting of pyridine groups were investigated by spectroscopy and electrochemistry. UV spectroscopy revealed the rapid kinetics for the reaction of 3-aminopyridine with sodium nitrite in HCl to form the 3-diazopyridinium cation with a second-order rate constant of 550 ± 20 L mol(-1) s(-1) at 22 °C. UV spectroscopy showed that the 3-diazopyridinium ion was relatively unstable and its transformation into 3-hydroxypyridine was proven by (1)H NMR. Its hydrolytic decomposition was investigated by NMR and followed first-order kinetics with a rate constant of (53 ± 5) × 10(-3) s(-1) at 22 °C. These results enable us to establish the appropriate conditions for the electrografting of pyridine from the corresponding diazonium cations generated in situ. The electrochemical modification of glassy carbon electrodes with pyridine was characterized by cyclic voltammetry and the resulting grafted layer by electrochemical impedance spectroscopy in the presence of Fe(CN)(6)(3-/4-) as redox probes. The effect of diazotization time before electrochemical reduction on the blocking effect of the grafted layer was investigated and showed that an increase of the diazotization time led to less efficient grafting. The presence of immobilized pyridine on the electrode surface was demonstrated by X-ray photoelectron spectroscopy measurements, and a surface coverage of 8.8 × 10(-10) mol cm(-2) was estimated for the grafted pyridine groups. The significance of these results for researchers using the in situ generation approach for electrochemical and chemical grafting is discussed.

Associations between Ixodes scapularis ticks and small mammal hosts in a newly endemic zone in southeastern Canada: implications for Borrelia burgdorferi transmission

Immature Ixodes scapularis infestation and Borrelia burgdorferi infection of wild small mammals were studied from June to October in 2007 and from May to October in 2008 at 71 study sites in a zone where I. scapularis populations and environmental Lyme disease risk are emerging in southwestern Quebec. Seasonal host-seeking activity of immature I. scapularis was similar to patterns reported previously in Canada and the USA: nymphal activity peaked in spring while larval activity peaked in late summer. Synchronous activity of nymphs with some larvae was observed in late spring, which could favour establishment of B. burgdorferi strains that cause short-lived infections in their hosts. White-footed mice (Peromyscus leucopus), deer mice (P. maniculatus), chipmunks (Tamias striatus), and red squirrels (Tamiasciurus hudsonicus) carried 92.0% of the larvae and 94.2% of the nymphs collected. Adult male white-footed mice carried significantly larger numbers of both larval and nymphal I. scapularis than other species and classes of small mammals (different demographic groups or physiological status: age, sex, sexual activity). We conclude that seasonality and host association were comparable to previous studies in North America, even in the context of a newly endemic pattern of low infection prevalence and low densities of host-seeking and feeding I. scapularis in southwestern Quebec. Our studies suggest that B. burgdorferi transmission cycles are focused on adult male mice (which carried 35% of all feeding ticks collected in the study), so control methods targeting this class of hosts may be particularly effective. However, our study also suggested that habitats containing a diverse host structure may dilute transmission cycles by partitioning of nymphal and larval ticks on different host species.

Optimization of the cathode material for nitrate removal by a paired electrolysis process

Ni, Cu, Cu(90)Ni(10) and Cu(70)Ni(30) were evaluated as cathode materials for the conversion of nitrate to nitrogen by a paired electrolysis process using an undivided flow-through electrolyzer. Firstly, corrosion measurements revealed that Ni and Cu(70)Ni(30) electrodes have a much better corrosion resistance than Cu and Cu(90)Ni(10) in the presence of chloride, nitrate and ammonia. Secondly, nitrate electroreduction experiments showed that the cupro-nickel electrodes are the most efficient for reducing nitrate to ammonia with a selectivity of 100%. Finally, paired electrolysis experiments confirmed the efficiency of Cu(70)Ni(30) and Cu(90)Ni(10) cathodes for the conversion of nitrate to nitrogen. During a typical electrolysis, the concentration of nitrate varied from 620ppm to less than 50ppm NO(3)(-) with an N(2) selectivity of 100% and a mean energy consumption of 20kWh/kg NO(3)(-) (compared to ∼35 and ∼220kWh/kg NO(3)(-) with Cu and Ni cathodes, respectively).

Electrochemical surface nanopatterning using microspheres and aryldiazonium

A multistep procedure to prepare heterogeneous structured surfaces with contrasted chemical functionalities at the nanometer scale is presented. Aryldiazonium cations are used for the nanopatterning of electrodes to create hybrid surfaces. The nanopatterning procedure involves the auto-organization of a polystyrene (PS) beads layer at gold or glassy carbon electrode surfaces. The deposited beads layer permits masking of a fraction of the surface from a first aryldiazonium electrografting process. By subsequent removal of the PS beads, the ungrafted surface areas become available for either another aryl diazonium electrografting or a metal electrodeposition, leading to hybrid nanostructured surfaces.

Nitrate removal by a paired electrolysis on copper and Ti/IrO(2) coupled electrodes - influence of the anode/cathode surface area ratio

In this study, nitrate removal in alkaline media by a paired electrolysis with copper cathode and Ti/IrO(2) anode enabled the conversion of nitrate to nitrogen. Optimum conditions for carrying out reduction of nitrate to ammonia and subsequent oxidation of the produced ammonia to nitrogen were found. At the copper cathode, electroreduction of nitrate to ammonia was optimal near -1.4 V vs Hg/HgO. At the Ti/IrO(2) anode, a pH value of 12, the presence of chloride and a potential fixed around 2.3 V vs Hg/HgO permitted the production of hypochlorite, leading to the oxidation of ammonia to nitrogen with a N(2) selectivity of 100%. Controlling the cathode/anode surface area ratio, and thus the current density, appeared to be a very efficient way of shifting electrode potentials to optimal values, consequently favoring the conversion of nitrate to nitrogen during a paired galvanostatic electrolysis. A cathode/anode surface area ratio of 2.25 was shown to be the most efficient to convert nitrate to nitrogen.