Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

Biofilm formation on medical devices can induce complications. Graphene oxide/silver nanoparticles (GO/AgNPs) coated nickel-titanium (NiTi) alloy has been successfully produced. Therefore, the aim of this study was to determine the anti-bacterial and anti-biofilm effects of a GO/AgNPs coated NiTi alloy prepared by Electrophoretic deposition (EPD). GO/AgNPs were coated on NiTi alloy using various coating times. The surface characteristics of the coated NiTi alloy substrates were investigated and its anti-biofilm and anti-bacterial effect on Streptococcus mutans biofilm were determined by measuring the biofilm mass and the number of viable cells using a crystal violet assay and colony counting assay, respectively. The results showed that although the surface roughness increased in a coating time-dependent manner, there was no positive correlation between the surface roughness and the total biofilm mass. However, increased GO/AgNPs deposition produced by the increased coating time significantly reduced the number of viable bacteria in the biofilm (p < 0.05). Therefore, the GO/AgNPs on NiTi alloy have an antibacterial effect on the S. mutans biofilm. However, the increased surface roughness does not influence total biofilm mass formation (p = 0.993). Modifying the NiTi alloy surface using GO/AgNPs can be a promising coating to reduce the consequences of biofilm formation.

Pain in Oral and Maxillofacial Surgery and Implant Dentistry: Types and Management

Over the years, the pain has been defined numerous times in several ways. In oral and maxillofacial surgery, the occurrence of pain, especially postoperatively, is anticipated. Pain arises as a combination of various processes after tissue damage. Distinct pain experiences in oral surgery were depicted in several previous studies, adding knowledge to the field. The management of these encounters has been suggested over time, improving treatment approaches in the clinical setting. This review aims to understand the pain and its types and intervention in the field of oral and maxillofacial surgery.

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients’ GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.

Characteristics of Periodontal Tissues in Prosthetic Treatment with Fixed Dental Prostheses

The objective of the present study was to investigate the effects of various types of fixed prostheses on periodontal tissues and explore the association of gingival biotype and gum recession in relation to prosthesis types. The study participants (N = 95) were divided into three groups based on the type of dental prosthesis: Group-I: cobalt-chrome (Co-Cr) ceramic prosthesis fabricated by the conventional method (n = 35); Group-II: consisted of patients with Co-Cr ceramic prostheses fabricated by a computer-aided design and computer aided manufacturing (CAD/CAM) technique (n = 30); and Group-III: zirconia-based prostheses fabricated by the CAD/CAM technique (n = 30). Following the use of prostheses, periodontal examinations were performed using the Community Periodontal Index (CPI) and Modified Approximal Plaque Index (MAPI). In addition, the gingival biotype was examined using a probe transparency method. The Statistical Package for the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA), was used to analyze the results, and the significance level was set at p = 0.05. It showed the MAPI results after the use of prosthetic rehabilitation for 12 months of periodontitis in 87.9% ± 15.4 of patients in Group-I, in 80.6% ± 17.97 in those in Group-II, and in 62.5% ± 21.4 in those in Group-III (p < 0.01). The CPI index results indicated a high prevalence of periodontal disease in all groups. The number of people with healthy periodontium constituted 17.1% of patients in Group-I, 24.2% in Group-II, and 37.1% in Group-III. Our study concluded that prosthetic treatment with periodontal diseases showed better outcomes while using dental prostheses fabricated by the CAD/CAM technique compared to the conventionally fabricated dental prostheses. The thin gingival biotype is more often associated with gingival recession than the thick biotype.

Characteristics of Periodontal Tissues in Prosthetic Treatment with Fixed Dental Prostheses

The objective of the present study was to investigate the effects of various types of fixed prostheses on periodontal tissues and explore the association of gingival biotype and gum recession in relation to prosthesis types. The study participants (N = 95) were divided into three groups based on the type of dental prosthesis: Group-I: cobalt-chrome (Co-Cr) ceramic prosthesis fabricated by the conventional method (n = 35); Group-II: consisted of patients with Co-Cr ceramic prostheses fabricated by a computer-aided design and computer aided manufacturing (CAD/CAM) technique (n = 30); and Group-III: zirconia-based prostheses fabricated by the CAD/CAM technique (n = 30). Following the use of prostheses, periodontal examinations were performed using the Community Periodontal Index (CPI) and Modified Approximal Plaque Index (MAPI). In addition, the gingival biotype was examined using a probe transparency method. The Statistical Package for the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA), was used to analyze the results, and the significance level was set at p = 0.05. It showed the MAPI results after the use of prosthetic rehabilitation for 12 months of periodontitis in 87.9% ± 15.4 of patients in Group-I, in 80.6% ± 17.97 in those in Group-II, and in 62.5% ± 21.4 in those in Group-III (p < 0.01). The CPI index results indicated a high prevalence of periodontal disease in all groups. The number of people with healthy periodontium constituted 17.1% of patients in Group-I, 24.2% in Group-II, and 37.1% in Group-III. Our study concluded that prosthetic treatment with periodontal diseases showed better outcomes while using dental prostheses fabricated by the CAD/CAM technique compared to the conventionally fabricated dental prostheses. The thin gingival biotype is more often associated with gingival recession than the thick biotype.

Dental-Facial Midline: An Esthetic Based Classification

Background:

The facial midline and dental midline play an important role in facial esthetics, cosmetic dentistry, facial plastic surgery, and anthropologic studies.

Objective:

This study studied the dental-facial midline in Nepalese subjects and to classify the midline.

Methods:

The study was conducted in 150 Nepalese subjects, mostly consisting of University students (80 males and 70 females). After obtaining ethical approval, facial and dental midlines were analyzed using a scale.

Results:

It showed 26 (18%) study subjects showed the coincidence of the facial midline with the maxillary and mandibular dental midlines. It showed that only 44 (30%) subjects showed the coincidence of facial midline with only maxillary dental midline, and 26 (17%) subjects showed the facial midline coincidence with only mandibular dental midline. The dental midline discrepancy was more prevalent in the maxillary arch and more prevalent on the right side. Midline discrepancy is seen more in males compared to females. The majority of the deviation showed 1 mm, followed by 2 mm, and 3 mm.

Conclusion:

The coincidence of the facial midline with both the maxillary and mandibular dental midlines is uncommon. Midline discrepancy is seen more in males compared to females. The majority of the subjects show a mild discrepancy of 1 mm. The midline discrepancy was more seen on the right side and in the maxillary arch.

Dental Practice during COVID-19 in Nepal: A Descriptive Cross-sectional Study

Introduction:

Currently, coronavirus disease (COVID-19) has become pandemic and spread globally. In Nepal, the number of COVID-19 is increasing day-by-day. This research was done to find out the impact of COVID-19 on dentists, patients, and dental practice in Nepal.

Methods:

This study is a cross-sectional study conducted using an online survey from May 10 to17, 2020. A questionnaire was designed and uploaded in Freeonlinesurveys.com. Following ethical approval, the questionnaire was distributed among 500 dentists, and 406 dentists participated in the study. The survey link was dispersed to the Nepali dentists through social media and e-mail, and the results of the responses were received online. The questionnaire consisted of a total of 34 closed-ended questions containing three parts; demographic details, knowledge of dentists on COVID-19, and the impact of COVID-19 on dentists, patients, and dental treatments.

Results:

It showed that majority of the participants were females 243 (60%) of the age group 25-29 years with the clinic as the workplace. Patients receive dental treatments only from 40 (10%) of the dentist. A high number of dentists: 284 (70%) were severely affected by the financial burden and were not receiving a salary during this lockdown. About 349(86%) of the dentist think they should do regular dental treatments, but only 101 (25%) think the dentist should do only dental emergency treatments for COVID-19 infected cases.

Conclusions:

Dentists, patients, and dental practice are severely affected by the COVID-19. The majority of the dentists have faced financial burdens. The dental treatments should be done with high standards of care and infection control following proper recommendations.

Cytomorphometric Analysis of Inflammation Dynamics in the Periodontium Following the Use of Fixed Dental Prostheses

Cytomorphometry is used in the sampling of biological materials and diagnostic procedures. The use of cytological studies in periodontal diseases is not well described in the literature. Our study aimed to quantitatively assess the inflammation dynamics using cytomorphometric analysis of the periodontium before and after the use of fixed dental prostheses. Following ethics approval, a total of 105 subjects were divided in 3 groups as gingivitis (n = 23), periodontitis (n = 58), and healthy periodontium (control) (n = 24). The fixed dental prostheses (crowns and fixed partial dentures) were fabricated from cobalt-chrome metal-ceramic prostheses using the conventional method (C/M-CoCr), cobalt-chrome metal-ceramic prostheses by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (C/C-CoCr), and zirconia-based ceramic prostheses by the CAD/CAM technique (C/C-Zr) among subjects with gingivitis and periodontitis. The gingival crevicular fluid (GCF) was obtained from subjects before and after the use of the prostheses. The total count of epithelial cells and the connective tissue cells or polymorphonuclear neutrophils (PMNs) in GCF were studied using cytomorphometric analysis. The Statistical Package Tor the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA) was used to analyze the results and the significance level was set at p = 0.05. The data for before and after the use of the prostheses were compared using independent t-Tests. Similarly, the results after the use of prostheses in gingivitis, periodontitis, and control in each type of prostheses were compared using One-way ANOVA with post hoc using Scheffe. The total epithelial cells and the PMNs were determined along with the epithelium/leukocyte index. Regardless of the prostheses type used, no significant change in the parameters was identified among patients with a healthy periodontium, before and after prosthetic treatment. In all study groups, a statistically increase (p value < 0.05) was observed in the oral epithelial cell counts and a statistically decrease (p < 0.05) in the PMNs count following the use of the fixed prostheses. Data on cytomorphometric analysis could enable the selection of the most appropriate prostheses for use in patients with periodontal pathologies. When choosing prostheses, changes in the composition of GCF could be considered as a useful criterion for their use.

Can Coronavirus Disease-19 Lead to Temporomandibular Joint Disease?

BACKGROUND: The coronavirus disease (COVID-19) has become pandemic spreading globally. The outbreak of COVID-19 has led to psychological problems and compromised the mental health of the people. Temporomandibular disorder (TMD) shows the pain and dysfunction of the masticatory apparatus. History of trauma, stress, psychosocial impairment, drinking alcohol, and catastrophizing are related to the TMD. AIM: We aimed to present some background information, in which COVID-19 may be correlated with TMD. METHODS: The outbreak of COVID-19 has led to psychological problems and compromised the mental health of the people. RESULTS: The outbreak of COVID-19 has led to psychological problems and compromised the mental health of the people, not those only who suffered from coronavirus but also to those in self-isolation, social-distancing, and quarantined. TMD shows the pain and dysfunction of the masticatory apparatus, and one of the major causes of TMD is stress and psychosocial impairment apart from drinking alcohol and history of trauma. Hence, TMD may be correlated with COVID-19. The consequences of anxiety, depression, and stress in people from the outbreak of COVID-19 may lead to TMD. CONCLUSION: Hence, COVID-19 may be correlated with TMD as one of the major causes of TMD is stress and psychosocial impairment.

Polyetherketoneketone (PEKK): An emerging biomaterial for oral implants and dental prostheses

Polyetherketoneketone (PEKK) is a new evolving polymeric material. The present article comprehensively reviewed an overview of various applications of PEKK in prosthodontics and oral implantology, highlighting its prospects for clinical applications. PEKK biomaterials is an elastic material with good shock absorbance and fracture resistance and present ultra-high performance among all thermoplastic composites for excellent mechanical strength, chemical resistance, and high thermal stability. Available articles on PEKK for dental applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect resources. PEKK presents suitable physical, mechanical, and chemical properties for applications in prosthodontics and oral implantology. PEKK has good potential for a wide range of dental applications, including tooth restorations, crowns, bridge, endoposts, denture framework, implant-supported fixed prosthesis, and dental implants. PEKK dental implants have shown lesser stress shielding compared to titanium for dental implant applications. Further modifications and improving material properties can result in broader applications in the field of dentistry. Long term evaluations are needed as PEKK is recently applied in dentistry, and there are limited studies published on PEKK.

Peri-implantitis Update: Risk Indicators, Diagnosis, and Treatment

Despite the success rates of dental implants, peri-implantitis presents as the most common complication in implant dentistry. This review discusses various factors associated with peri-implantitis and various available treatments, highlighting their advantages and disadvantages. Relevant articles on peri-implantitis published in English were reviewed from August 2010 to April 2020 in MEDLINE/PubMed, Scopus, and ScienceDirect. The identified risk indicators of peri-implant diseases are plaque, smoking, history of periodontitis, surface roughness, residual cement, emergence angle >30 degrees, radiation therapy, keratinized tissue width, and function time of the implant, sex, and diabetes. Peri-implantitis treatments can be divided into nonsurgical (mechanical, antiseptic, and antibiotics), surface decontamination (chemical and laser), and surgical (air powder abrasive, resective, and regenerative). However, mechanical debridement alone may fail to eliminate the causative bacteria, and this treatment should be combined with other treatments (antiseptics and surgical treatment). Surface decontamination using chemical agents may be used as an adjuvant treatment; however, the definitive clinical benefit is yet not proven. Laser treatment may result in a short-term decrease in periodontal pocket depth, while air powder abrasive is effective in cleaning a previously contaminated implant surface. Surgical elimination of a pocket, bone recontouring and plaque control are also effective for treating peri-implantitis. The current evidence indicates that regenerative approaches to treat peri-implant defects are unpredictable.

Quackery in Dental Practice in Nepal

Quackery and fraud in dental practice, seen in many countries, is also rampant in Nepal, and they are unethical practices. There is a growing need for strict enforcement of government policy measures to eliminate quackery and fraudulent dental practice in Nepal. The government should mobilize all dental workforce (dental specialists, dentists, and dental auxiliaries) and aware of their responsibilities and limitations. This article presents a brief review showing some cases of malpractice in dentistry in Nepal.

Corrosion Resistance of Graphene oxide/Silver Coatings on Ni-Ti alloy and Expression of IL-6 and IL-8 in Human Oral Fibroblasts

Graphene based materials (GBMs) have potentials for dental and medical applications. GBMs may cause changes in the levels of cytokine released in the body. This study aimed to study the corrosion resistance of graphene oxide (GO) and GO/silver (GO/Ag) nanocomposite coated nickel-titanium (NiTi) alloy by electrophoretic deposition and to access the viability of human pulp fibroblasts, and the interleukin (IL)-6 and IL-8 expression level. The bare and coated NiTi samples were characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), Raman spectroscopy, surface profilometry, and X-ray diffraction (XRD). The corrosion resistance of the bare NiTi and coated NiTi samples were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy in 3.5% NaCl solution. The cell viability of human pulp fibroblasts was accessed by the treated culture medium of the bare NiTi and coated NiTi alloys containing 1% fetal bovine serum. IL-6 and IL-8 expression levels were studied by human enzyme-linked immunosorbent assay (ELISA). Data were analyzed using One-way ANOVA (α  =  0.05). Both the GO-coated NiTi and GO/Ag-coated NiTi alloys showed better corrosion resistance, a lower rate of corrosion, and higher protection efficiency than the bare NiTi alloy. The coated NiTi alloys were biocompatible to human pulp fibroblasts and showed upregulation of IL-6 and IL-8 levels.

Evaluation of Fracture Resistance and Sites of Failure of Different Dowel Core Restorations: An In-Vitro Study

Background:

Dowel Cores are often required in endodontically treated tooth to aid retention and resistance for a final prosthetic crown. Studies concerning the role of post-core systems on the fracture resistance with different dowel material remain controversial.

Aim:

This experimental study aimed to investigate the fracture resistance strength and failure mode of 3 dowel systems (glass fiber, indirect resin, and prefabricated metal with resin core).

Methods:

Twenty-one extracted human maxillary central incisors were first endodontically treated and then separated into 3 equal groups randomly;1st group consisted of glass fiber dowel, 2nd group consisted of indirect resin dowel, and 3rd group consisted of the prefabricated metal dowel. All specimens were restored with resin core and indirect resin crown. A testing force was applied with a universal testing machine (at 135 o angle) at 3 mm from the incisal edge of crown and forces were measured. Statistical tests were done using One-way ANOVA and Chi-square Test.

Results:

There was no significant difference (P-value >0.05) of the fracture resistance among glass fiber dowel, indirect resin dowel and pre-fabricated dowel with indirect resin crown. The prefabricated metal dowel had maximum fracture resistance (566 ±157.771 N) followed by Glass fiber dowel (541.047 ±199.571 N) and indirect resin dowel and post (444.550 ±139.788 N).

Conclusion:

Glass fiber dowel, indirect resin dowel and prefabricated metal dowel with resin core and indirect resin crown systems showed statistically insignificant fracture strength values and mode of failure.

Bioactive Glass Applications in Dentistry

At present, researchers in the field of biomaterials are focusing on the oral hard and soft tissue engineering with bioactive ingredients by activating body immune cells or different proteins of the body. By doing this natural ground substance, tissue component and long-lasting tissues grow. One of the current biomaterials is known as bioactive glass (BAG). The bioactive properties make BAG applicable to several clinical applications involving the regeneration of hard tissues in medicine and dentistry. In dentistry, its uses include dental restorative materials, mineralizing agents, as a coating material for dental implants, pulp capping, root canal treatment, and air-abrasion, and in medicine it has its applications from orthopedics to soft-tissue restoration. This review aims to provide an overview of promising and current uses of bioactive glasses in dentistry.

Graphene Oxide/Silver Nanoparticle Coating Produced by Electrophoretic Deposition Improved the Mechanical and Tribological Properties of NiTi Alloy for Biomedical Applications

The aim of this study was to evaluate the mechanical and tribological properties of graphene oxide/silver nanoparticle (GO/AgNP) coated medical grade nickel-titanium (NiTi) alloy. The alloy substrates were coated using electrophoretic deposition at 30 V for 1, 5, and 10 min and were characterized by SEM, Raman spectroscopy, EDS, and surface profilometer. Mechanical and tribological tests were performed for hardness, Young's modulus, and friction coefficient. The data were analyzed using the Kruskal-Wallis test at a significance level of 0.05 to compare the coatings' roughness, thickness, friction coefficient, and hardness at the different coating times. The GO/AgNP coatings were confirmed with Raman spectroscopy, which demonstrated the presence of D bands and G bands at ∼1300 cm^-1 and ∼1600 cm^-1. The intensity ratios of the D and G bands (I_D/I_G) were 0.838, 0.836, and 0.837 in the 1, 5, and 10 min coated groups, respectively. The coating thickness ranged from 0.46-1.34 μm and the mean surface roughness (Ra) ranged from 50.72-69.93 nm. Increasing the coating time from 1-10 min increased the roughness, thickness, and Young's modulus of surface coating. The friction coefficients of the coated NiTi alloy were significantly lower compared with that of the uncoated NiTi allloy (p < 0.001). The GO/AgNP nanocomposite coated NiTi alloy demonstrated improved mechanical strength and a reduced friction coefficient that would be more favorable for biomedical applications.

Maxillary Anterior Teeth Proportions for Creating Esthetically Pleasuring Smile in Nepalese Patients

NA.

Relationship Between Prosthodontic Treatment and Nutritional Status: A Review

Pertinent literature search about changes or effects of prosthodontic treatment on nutritional status was performed. The articles were electronically and hand searched in all available journals including research works, reviews, randomized controlled trials and systematic reviews. The information were obtained to answer the question whether denture therapy has a role in altering nutritional intake or not. Most articles agreed that the risk of malnutrition is elevated by being edentulous. However, there were contrasting results about improvement of nutrition by providing prosthodontic treatment. Thus, many authors have emphasized the role of nutritional counseling along with denture therapy for the benefits of geriatric patients who undergo the inevitable process of being edentulous.BJHS 2018;3(1)5 : 385 - 389

Polymeric materials and films in dentistry: An overview

The use of polymeric materials (PMs) and polymeric films (PMFs) has increased in medicine and dentistry. This increasing interest is attributed to not only the excellent surfaces of PMs and PMFs but also their desired mechanical and biological properties, low production cost, and ease in processing, allowing them to be tailored for a wide range of applications. Specifically, PMs and PMFs are used in dentistry for their antimicrobial, drug delivery properties; in preventive, restorative and regenerative therapies; and for corrosion and friction reduction. PMFs such as acrylic acid copolymers are used as a dental adhesive; polylactic acids are used for dental pulp and dentin regeneration, and bioactive polymers are used as advanced drug delivery systems. The objective of this article was to review the literatures on the latest advancements in the use of PMs and PMFs in medicine and dentistry. Published literature (1990–2017) on PMs and PMFs for use in medicine and dentistry was reviewed using MEDLINE/PubMed and ScienceDirect resources. Furthermore, this review also explores the diversity of latest PMs and PMFs that have been utilized in dental applications, and analyzes the benefits and limitations of PMs and PMFs. Most of the PMs and PMFs have shown to improve the biomechanical properties of dental materials, but in future, more clinical studies are needed to create better treatment guidelines for patients.

An epidemiological study on the prevalence of temporomandibular disorder and associated history and problems in Nepalese subjects

BACKGROUND

Temporomandibular disorder (TMD) represents a subgroup of painful orofacial disorders involving pain in the temporomandibular joint (TMJ) region, fatigue of the cranio-cervico-facial muscles (especially masticatory muscles), limitation of mandible movement, and the presence of a clicking sound in the TMJ. TMD is associated with multiple factors and systemic diseases. This study aimed to assess the prevalence of TMD in Nepalese subjects for the first time.

METHODS

A total of 500 medical and dental students (127 men and 373 women) participated in this study from May 2016 to September 2016. The Fonseca questionnaire was used as a tool to evaluate the prevalence of TMD, and Fonseca's Anamnestic Index (FAI) was used to classify the severity of TMD.

RESULTS

The majority of the participants with TMD had a history of head trauma, psychological stress, and dental treatment or dental problems. The prevalence of TMD in Nepalese students was mild to moderate.

CONCLUSIONS

The prevalence of TMD in Nepalese subjects was mild to moderate. The majority of the study subjects had eyesight problems, history of head trauma, psychological stress, and drinking alcohol and had received dental treatments.

Full Coverage Crowns and Resin-bonded Bridge Combination for Missing Mandibular Anterior Teeth

Most often the anterior teeth and those that are visible when a patient speaks or smiles are chosen for esthetic restorations. The mandibular anterior fixed bridge often presents problems to the dentist due to the size of the natural teeth and their visibility. In addition, due to high cost factor, many patients are not able to afford fixed partial denture for missing anterior teeth. This article describes a cost effective technique for the restoration of missing mandibular anterior teeth by fabrication of full coverage crowns and resin-bonded fixed bridge combination.

Nepalese Esthetic Dental (NED) Proportion in Nepalese Population

Background Lots of studies on maxillary anterior teeth proportions have been studied in different populations in various countries, but no studies have been conducted in Nepal on the esthetic maxillary anterior teeth proportions. Objective The study was done to investigate the maxillary anterior teeth proportions in a Nepalese population. Teeth proportions in the total population were compared with golden proportion (GP) and golden standard (GS). Method A total of 150 Nepalese subjects were divided in three facial types; broad, average and narrow group. Maxillary anterior teeth were measured from dental casts using digital calipers. The perceived width ratios of lateral to central incisor (LI/CI) and canine to lateral incisor (CN/LI), ratios of mean central incisor length to 2 central incisor widths (CIL/2CIW), and actual width to length ratios (WLRs) (%) were calculated in each facial type and compared. Mean LI/CI, CN/LI and CIL/2CIW in total population were calculated and compared with GP (0.618), and mean WLRs in the total population were compared with GS (80%). All teeth proportions were compared among three facial types. One-sample t-test and one-way ANOVA were performed to analyze the data (α = 0.05). Result The LI/CI, CN/LI, CIL/2CIW and WLRs in three facial types showed no significant difference. The LI/CI, CN/LI and CIL/2CIW in the total population were 66%, 70% and 55% respectively, and were significantly different from GP. The WLRs for CI, LI and CN in the total population were 90%, 86% and 89% respectively and significantly differed from GS. These values were considered to constitute the Nepalese Esthetic Dental (NED) proportion. Conclusion No significant difference of maxillary anterior teeth proportions were observed among three facial types. Teeth proportions in the total population significantly differed from GP and GS. We propose the NED proportion as a guideline for dental treatment in the maxillary anterior region in Nepalese populations.