Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.

Comparison of the different methods of width estimation in unerupted canine and premolars

BACKGROUND

There are different methods for determining the required space for unerupted teeth. However, the accuracy of these techniques varies depending on ethnic differences. Therefore, the current study was performed to compare the accuracy of four methods for estimating the mesiodistal width of unerupted canines and premolars in a population of northern Iran.

METHODS

The present cross-sectional study was conducted on 50 pairs of dental casts of patients aged 12-24 years old. The mesiodistal width of the teeth was measured with a digital caliper by two observers (ICC < 0.9), and the mean value was recorded. The space required for eruption of canines and premolars was obtained by the Tanaka-Johnson formula and the Moyers tables and compared with the actual value by paired t test.

RESULTS

The Tanaka-Johnson formula had overestimation in the maxilla and mandible, which was statistically significant (p < 0.001). The values obtained from the Moyers tables in different confidence levels were not accurate. However, the 65% level for the mandible had almost no difference from the actual value (P = 0.996 and r2 = 0.503). Furthermore, linear regression was obtained based on the total mesiodistal width of the maxillary first molar and mandibular central incisor (maxilla: Yx= 0.613X + 2.23 and mandible: Ym= 0.618X + 1.6) and the total mesiodistal width of the mandibular first molar and maxillary central incisor in each jaw (maxilla: Yx = 0.424X + 5.021 and mandible: Ym = 0.447X + 3.631).

CONCLUSION

The Tanaka-Johnson method was overestimated in the population of northern Iran. The 85% and 75% confidence levels of the Moyers table have the best clinical results for the maxilla and mandible, respectively. Regression based on maxillary first molars and mandibular central incisors has better results.

Evaluation of changes in root canal length and accuracy of the electronic apex locator during different stages of endodontic treatment and retreatment

This study evaluated changes in the root canal length (RCL) and the accuracy of the electronic apex locator (EAL) during the different stages of endodontic treatment and retreatment. Fifty-six mesial root canals of mandibular molars were selected. The actual root canal length (AL) of the canals was obtained by inserting a size 15 hand file up to the apical foramen, under magnification. The electronic lengths were obtained at the "APEX" mark of Root ZX II, using an alginate model. Both measurements were performed at three different stages of the initial root canal treatment-unflared, flared, and concluded-and at two stages of retreatment, after achieving patency and repreparation. Data were statistically analyzed and the significance level established was 5%. All stages produced a significant reduction in the AL (p < 0.05). The greatest variation was observed between the unflared-flared stages (0.2 mm) and between concluded-patency stages (0.09 mm), with no difference between them (p > 0.05). The accuracy of Root ZX II was negatively affected after achieving patency, presenting statistically significant difference compared to the other stages (p < 0.05). A significant reduction in the RCL was observed along the different stages of endodontic treatment and retreatment. The EAL was accurate to measure the root canals in most stages, except after achieving patency for endodontic retreatment. Determining and monitoring the RCL is an essential step towards a favorable prognosis, since it reduced along the different stages evaluated. Root ZX II was not accurate for endodontic retreatment.

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification

INTRODUCTION

Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification.

METHODS

In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05).

RESULTS

All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658).

CONCLUSION

Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

Correlation Theory of the Maxillary Central Incisor, Face and Dental Arch Shape in the Serbian Population

Background and Objectives: According to the modified Williams theory, the shape of the maxillary central incisor corresponds to the shape of the maxillary alveolar ridge (dental arch) and the shape of the face. Moreover, the standards of beauty suggest that the center of the face of an individual with a full set of teeth should match the center of the maxillary and mandibular dental arches. The purpose of this study is to conduct a comparative cross-sectional study on the matching of the shape of the face, maxillary central incisor and maxillary dental arch as well as the matching of the midfacial line and dental arches in subjects with complete dentition. Materials and Methods: The study included 90 subjects of both sexes. The matching of the shape of the face and midfacial line, i.e., dental arches and maxillary incisors, was determined by analysing photographs, whereas the shape of the dental arch was determined by analysing plaster models. Results: No significant gender-related differences were found either in the shape of the maxillary central incisor that matched the shape of the maxillary dental arch (p = 0.349) or in the shape of the dental arch that matched the shape of the face (p = 0.697). However, a significant difference was noted in the shape of the teeth that matched the shape of the face (p = 0.043), which was more significantly impaired in men. In addition, the matching of the mid-face and the mid-dental arch was significantly greater in women (p = 0.016). Conclusions: The modified Williams theory was confirmed in most subjects, thus it can be considered a relevant guideline when determining the shape of teeth after their loss. The highest percentage of matching in both sexes was with the shape of the face and dental arch. There was no positive correlation between the middle of the maxillary and mandibular dental arch in most cases.

In Vitro Comparison of the Accuracy of Cone-Beam Computed Tomography Scanning and Electronic Apex Locators in Detection of Simulated Root Perforations in Different Localizations

INTRODUCTION

This study aimed to compare the accuracy of cone-beam computed tomographic (CBCT) scanning and 2 different electronic apex locators (EALs) in the detection of simulated root canal perforations in different localizations.

METHODS

Eighty human mandibular premolars were prepared and divided into 2 groups according to the localization of the perforation area, having a 1-mm diameter. The distance between the occlusal edge and the beginning of the perforation was measured under a stereomicroscope (actual working length) using 2 EALs (Propex II [Dentsply Maillefer, Ballaigues, Switzerland] and Dentaport ZX [J. Morita, Tokyo, Japan]) (electronic working length) and CBCT images (CBCT working length). The calculations were made by subtracting the actual working length from the electronic working length and the CBCT working length to determine the differences.

RESULTS

In the apical third perforation group, there was a significant difference between Dentaport ZX and CBCT imaging. There was no significant difference between Dentaport ZX and Propex II and Propex II and CBCT measurements. In the middle third perforation group, Propex II was significantly more successful than CBCT imaging. In addition, there was no significance between the accuracy of Propex II in detecting the perforation area between the apical third perforation group and the middle third perforation group. CBCT imaging was more accurate in detecting the perforation area in the apical third perforation group than in the middle third perforation group.

CONCLUSIONS

In cases in which the root canal perforation was in the apical third of the root, both the EAL and CBCT imaging were successful in determining the perforation area, whereas the success rate of all devices used in this study decreased when the perforation area was in the middle third of the root.

Evaluation of accuracy of an electronic apex locator in presence of sodium hypochlorite in primary teeth with and without resorption

This study compared the accuracy of Root ZX mini apex locator in presence of sodium hypochlorite (NaOCl) in primary molars with and without apical resorption. Sixty-four extracted primary lower molar teeth with 32 root resorption and 32 without resorption were selected. To determine the actual working length (AWL), a K-file was inserted into the root canal until the tip of the file was visible at the major foramen or the resolution level. It was then withdrawn 1 mm. This value was recorded as AWL. The teeth were then divided subgroups (with/without NaOCl). To determine the electronic working length, a Root ZX mini apex locator in canals with/without NaOCl was used. A K-file was inserted into the canal to just beyond the foramen, as indicated by the flashing "APEX" bar, and the electronic working length was determined by subtracting 1 mm from this length. The deviation of the Root ZX mini measurement from the AWL was determined. Student's t-test was used for statistical analysis. In teeth with no resorption, the measurement accuracy rates (within+/-0.5 mm) of non-NaOCl and NaOCl groups were 84.37% and 81.25%, respectively (p > 0.05); within+/-1 mm, the non-NaOCl and NaOCl demonstrated 100% and 96.87% accuracy, respectively (p > 0.05). In teeth with resorption, the measurement accuracy rates (within+/-0.5 mm) was 81.25% for the non-NaOCl and 62.50% for the NaOCl, respectively (p < 0.05). The measurement accuracy rates (within+/-1 mm) of the non-NaOCl and NaOCl was 96.87% and 84.37%, respectively (p < 0.05). The presence of NaOCl in the root canal affected the accuracy of the Root ZX mini in primary teeth with apical resorption, but not in teeth without resorption.

The Effect of Coronal Pre-flaring and Type of Root Canal Irrigation on Working Length Accuracy Using Electronic Apex Locators

Background: Successful root canal treatment is influenced by the apical extent of root canal preparation and the eventual root canal filling. Achieving the full working length until the apical constriction, which is usually 0.5 - 1 mm shorter than the anatomical apex, is crucial. Electronic apex locators were used to detect the working length more accurately. There are six generations of electronic apex locators in the market. The selection of the appropriate irrigation with each apex locator for accurate working length determination is not fully investigated. Methods: The actual working lengths of 120 freshly extracted human single-rooted teeth were measured and compared with their working lengths using 3 rd generation (Root ZX) followed by 6 th generation (Raypex 6) apex locators in dry medium, presence of 5.25% sodium hypochlorite, and 2% chlorhexidine, without coronal pre-flaring and after coronal pre-flaring using the same irrigating media. Data were collected, tabulated, and afterward analyzed using one-way ANOVA with post-hoc to evaluate the significant difference in average working length between actual working length, Root ZX, and Raypex 6 apex locator working lengths accuracy. Results: The significant results were shown in roots that were coronally pre-flared and their working lengths were measured in a dry medium using Raypex 6 apex locator. While using the Root ZX apex locator, the most accurate results were shown in roots that were coronally pre-flared and their working lengths were measured while using a chlorhexidine irrigating solution. Conclusions: It is concluded that it is very important to know the specific irrigating medium to be used with each specific electronic apex locator to achieve the most accurate working length results.

The difference distance between the apical foramen and the anatomical apex in primary teeth-An in vitro study

INTRODUCTION

The apex area in the primary teeth changes continuously due to the physiologic resorption, therefore; the apical foramen (AF) may not correspond to the anatomic apex (AA), which gives a big challenge to achieve successful endodontic treatment. The aim of this research was to study the difference distance (DD) between the position of the AA and AF, besides the difference acceptance (DA) in primary teeth, and the effect of the following variables: root canal curvature, resorption degree, and canal size on DD and DA separately.

METHODS

In this research, 180 root canals from 60 primary teeth were studied. Two lengths of each canal were measured by a K-file from a certain point in the crown; the first length was until the AA and the second was until the AF. Then DD was obtained by calculating the difference between those two lengths. Statistical analysis tests were done. A p value of <.05 was considered significant at a 95% confidence level.

RESULTS

The percentage of canals with 0 mm DD was 34.4%, while it was 1.1% with DD of 6 mm. The percentages of acceptable ( ≤ 2 mm) and unacceptable ( > 2 mm) difference were 84.4% and 15.6%, respectively. There was a significant difference in the DD value between the three groups of curvature degree and the three groups of canal size. There was a significant difference between the DA in the three groups of canal size.

CONCLUSION

DD has a wide variation value in primary teeth regardless of the degree of root resorption, which has not affected this value or the accepted difference; however, DD and acceptable difference values are somehow affected by the degree of root curvature and canal size. We recommend adding acceptable difference as a criterion when considering pulpectomy treatment in primary teeth.

The relationship of tooth crown dimensions between first molar and central incisor in maxilla

The purpose of this study was to investigate a correlation between the cusp dimensions of the first molar and mesiodistal crown diameters of the central incisors in the maxilla. The study materials were composed of dental casts from 29 modern Japanese female subjects with a mean age of 20 years and 8 months. The mesiodistal crown diameters of the maxillary central incisors were measured. The mesiodistal and bucco-lingual crown diameters and the cusp diameters of the maxillary first molars, such as the paracone, metacone, protocone, and hypocone, were also measured. The crown areas and indices of the first molars were calculated. The Spearman's single rank correlation coefficients between the mean values for the crown dimensions of the first molars and the mesiodistal crown diameters of the central incisors were calculated. The hypocone cusp diameter and the hypocone index were the largest compared to those of the paracone, protocone, and metacone cusps. The bucco-lingual diameter and hypocone cusp diameter of the first molars positively correlated with the mesiodistal crown diameters of the central incisors on the same sides. There were positive correlations between the hypocone index of the first molars and the mesiodistal crown diameters of the central incisors. Based on the results, if a large hypocone is observed in eruption of the maxillary first molars, it will be predictable that of the mesiodistal crown diameter of the maxillary central incisor large.

Influence of Embedding Medium on iPex Electronic Apex Locator Accuracy: An Ex Vivo Comparative Study Using Alginate, Saline, and Gelatin Models

AIM

Accurate working length determination during root canal treatment is essential for achieving successful outcomes. This study aimed to evaluate the impact of embedding medium on the accuracy of iPex electronic apex locator (EAL).

MATERIALS AND METHODS

Sixty-one extracted single-rooted teeth were decoronated and coronally flared with Gates-Glidden burs. Actual canal length (ACL) was obtained by introducing a size 8 K-file until its tip reached the most coronal border of the apical foramen. This step was performed thrice and then averaged. Deducting 0.5 mm from the ACL provided the working length (WL). The teeth were randomly placed in plastic containers filled with freshly mixed alginate, gelatin, or saline, with the lip clip placed in the medium. The blinded operator obtained electronic measurements using iPex by advancing a K-file with a size compatible with the canal attached to the file clip and advanced until the 0.0 mark, then withdrawn to the 0.5 mark. This step was performed thrice and then averaged. Data were analyzed using ANOVA and Tukey's post hoc test, with significance level set at 5% (α = 0.05).

RESULTS

The mean difference between WL and iPex length obtained in the gelatin model was significantly longer than the difference with mean iPex length in alginate (p = 0.005) and in saline (p < 0.001). There was no significant difference between iPex readings obtained in alginate and saline (p = 0.249).

CONCLUSION

The use of freshly mixed alginate or saline for ex vivo assessment of iPex is recommended, whereas the use of gelatin could increase the chances of readings longer than looked for.

CLINICAL SIGNIFICANCE

Identifying the optimum embedding medium for ex vivo testing of EALs permits the comparison and assessment of several factors affecting EALs' precision under standardized conditions. This helps in understanding EAL performance in vivo and in optimizing its clinical utilization.

Variations in the morphology of apical constriction affecting electronic readings: An in vitro investigation using 3D-printed tooth models

We investigated the interference of apical constriction position and diameter on the accuracy of electronic apex locators using 3D-printed tooth models. Single-rooted tooth models with the same length, canal taper and major foramen, but variation in apical constriction position or size, were designed and 3D-printed. A mounting model was custom-made for precise measurement of both marks (0.5 and APEX/0.0) of two electronic apex locators. The electronic measurements of both devices were correlated significantly to the major foramen rather than apical constriction. The mean measurements of the group with 0.45 mm in apical constriction width were significantly shorter than those of the other groups for both marks of the two devices (p < 0.05). The variations in apical constriction position and width negatively affected the precision of the 0.5 mark of the tested devices. The 0.0 or APEX mark was consistently located the major foramen.

An in vitro evaluation of the WIRELE-x electronic apex locator

This study evaluated the accuracy of the Wirele-X (Forum Tec, Ashkelon, Israel), a novel Bluetooth-enabled wireless electronic apex locator. Thirty-one extracted teeth with mature apices were used. Under 10X magnification, the actual canal lengths were determined. The teeth were embedded in alginate and electronic canal lengths were obtained using the Root ZX II and Wirele-X electronic apex locators. The actual canal lengths and electronic canal lengths were compared with Student's t-test. The average distance from the file tip to the actual canal length was -0.11 mm (±0.16) for the Root ZX II, and - 0.07 mm (±0.21) for the Wirele-X. There were no statistically significant differences between the two electronic apex locators in their ability to determine the actual canal length (p > 0.05). The wireless apex locator (Wirele-X) and the wired apex locator (Root ZX II) were found to be equally accurate.

Accuracy of different electronic apex locators in determination of minimum Root perforation diameter

This study aims to evaluate the ability of Raypex 6, Propex Pixi, Dentaport ZX, Apex ID, Propex II and Dr.'s Finder NEO to detect minimum root canal perforation diameter. One hundred single-rooted, extracted human teeth were artificially perforated by 5 burs in different diameters (0.25-1.25 mm) in 5 mm above the apex. Twenty teeth were assigned to each group. The actual canal lengths (AL) were measured under stereomicroscope followed by a measurement of electronic canal length (EL) using each electronic apex locator (EAL). None of the EALs were able to detect the perforation at diameters of 0.50 and 0.25 mm. Although all EALs used in our study were unable to detect perforations at diameters of 0.5 mm and 0.25 mm, they were highly successful in the determination of simulated root perforations at diameters of 1.25, 1 and 0.75 mm.

Aging changes in maxillary anterior teeth in untreated individuals: an observational longitudinal study

OBJECTIVE

The aging of the occlusion and tooth wears influence the smile design This study aimed at evaluating the aging changes of maxillary anterior teeth in nontreated subjects.

METHODS

The sample comprised dental models of 23 subjects (13 male, 10 female) with normal occlusions, taken at 13 (T1), 17 (T2) and 61 (T3) years of age. The following variables were measured in the maxillary anterior teeth using digital dental models: crown width/height proportion, anterior view width, crown angulation, gingival and incisal steps between central/lateral incisors and central incisors/canines. Interphase comparisons were evaluated using repeated measures analysis of variance followed by Tukey tests or Friedman tests. Sexual differences were evaluated using t tests (P < 0.05).

RESULTS

From 13 to 61 years of age, a decrease of crown width/height proportion (P = 0.008 and P =  < 0.001, for the lateral incisor and canines, respectively) and mesiodistal angulation (P =  < 0.001, P = 0.001 and P = 0.025 for the central incisor, lateral incisor and canines, respectively) of the maxillary anterior teeth were observed. The steps of the gingival margin and the incisal steps decreased with aging.

CONCLUSIONS

From adolescence to late adulthood, untreated individuals with normal occlusions demonstrated changes in the maxillary anterior teeth that may impair the smile esthetics and attractiveness.

Genetic Correlation, Pleiotropy, and Molar Morphology in a Longitudinal Sample of Australian Twins and Families

This study aims to expand our understanding of the genetic architecture of crown morphology in the human diphyodont dentition. Here, we present bivariate genetic correlation estimates for deciduous and permanent molar traits and evaluate the patterns of pleiotropy within (e.g., m1–m2) and between (e.g., m2–M1) dentitions. Morphology was observed and scored from dental models representing participants of an Australian twin and family study (deciduous n = 290, permanent n = 339). Data collection followed Arizona State University Dental Anthropology System standards. Genetic correlation estimates were generated using maximum likelihood variance components analysis in SOLAR v.8.1.1. Approximately 23% of deciduous variance components models and 30% of permanent variance components models yielded significant genetic correlation estimates. By comparison, over half (56%) of deciduous–permanent homologues (e.g., m2 hypocone–M1 hypocone) were significantly genetically correlated. It is generally assumed that the deciduous and permanent molars represent members of a meristic molar field emerging from the primary dental lamina. However, stronger genetic integration among m2–M1/M2 homologues than among paired deciduous traits suggests the m2 represents the anterior-most member of a “true” molar field. The results indicate genetic factors act at distinct points throughout development to generate homologous molar form, starting with the m2, which is later replaced by a permanent premolariform crown.

[Esthetic proportions of maxillary anterior tooth among 300 normal occlusion college students in Shanxi province]

Objective: To explore the relationship between the width ratios of maxillary anterior teeth, the width/height ratios of maxillary central incisor and the esthetic proportions among individual normal occlusion, and to provide reference for the esthetic design of anterior teeth. Methods: A total of 300 Shanxi Medical University students who were residents from Shanxi province with normal occlusion (110 males, 190 females, aged 18-30 years) were recruited in this study from October 2020 to March 2021. Standardized digital photographs of the maxillary anterior tooth in natural head position were obtained, the perceived width of the maxillary anterior teeth (maxillary central incisors, lateral incisors and canines) on the left and right sides and height of maxillary central incisor were measured on the standardized digital photographs, then the width ratios of adjacent maxillary anterior teeth including the lateral incisor/central incisor width ratio (LI∶CI), the canine/lateral incisor width ratio (C∶LI), and the width/height ratios (W/H ratio) of the maxillary central incisor were calculated. The independent sample t test was used to compare the sex differences of each measurement project, Single sample t test was used to compare the difference of adjacent maxillary anterior teeth width ratios with golden proportion (0.618 and 0.618), Preston proportion (0.66 and 0.84), the recurring esthetic dental (RED) proportion (0.70 and 0.70). The percentage of anterior tooth width/intercanine width was calculated, the number and proportion of teeth conforming to golden percentage (25%, 15%, 10%)±1% or modified golden percentage (22.5%, 15.0%, 12.5%)±1% were calculated. The number and proportion of width/height ratio of maxillary central incisor ranged from 0.75 to 0.85 was counted. Results: The widths of maxillary central incisor, lateral incisor and canine were (8.50±0.52), (6.23±0.53) and (5.18±0.55) mm, respectively, the corresponding tooth of male [(8.74±0.49), (6.37±0.52), (5.41±0.47) mm] was significantly higher than that of female [(8.37±0.50), (6.15±0.52), (5.04±0.54) mm] (t=6.40, 3.55, 6.23,P<0.05). The width ratio of maxillary lateral incisor/central incisor was 0.73±0.05, and there was no significant difference between genders (t=-1.06, P>0.05). The width ratio of canine/lateral incisor was 0.84±0.10, and it was significantly higher in male (0.85±0.10) than in female (0.82±0.10) (t=2.42, P<0.05). Two width ratios of maxillary anterior teeth were significantly different from golden proportion and the RED proportion (t=38.50, 35.74, 11.48, 22.20, P<0.05). The lateral incisor/central incisor was significantly different from that of Preston proportion (t=24.66, P<0.05), while the canine/lateral incisor was not significantly different from that of Preston proportion (t=-0.92, P>0.05). In this study, a total of 0% (0/600) of central incisors, 63.0% (378/600) of lateral incisors and 5.8% (35/600) of canines met the golden percentage±1%. There were 42.8% (257/600) of central incisors, 63.0% (378/600) of lateral incisors and 56.7% (340/600) of canines met the modified golden percentage±1%. The width/height ratio of maxillary central incisors was 0.86±0.08, and there was no significant difference between genders (t=-0.88, P>0.05). Only 36.3% (218/600) of the subjects in this study ranged from 0.75 to 0.85. Conclusions: Gender differences should be considered in the esthetic design of anterior teeth; for the width ratios of maxillary anterior teeth, the golden proportion, the RED proportion and golden percentage do not accord with the natural tooth morphological characteristics of Shanxi nationality college students in normal occlusion. Preston proportion and modified golden percentage are of more reference value. The width/height ratio of maxillary central incisors is different from 0.75-0.85.

Central incisors shape and proportions prevalence in Argentinian university students: by visual assessment and a new standardized method

The aim of this study was to analyze the dimensions of the clinical crown of upper central incisors and the prevalence of tooth shapes by two different protocols. Assessment was performed on each of the 111 dental stone type V maxillae models of students of dentistry from Buenos Aires University [93 females and 18 males, mean age 23.70 (± 2.26) years] The mesial and distal-vestibular angles were defined on each right upper incisor, and the following segments were defined: AB (zenith - incisal edge), CD, EF, GH (apical, middle, and incisal thirds - vestibule - mesial and vestibule-distal angles) and their lengths were determined with a precision caliper. Then, the CD/AB, EF/AB and mean CD-EF/AB ratios were calculated. Shapes were assessed by four independent observers, three of whom evaluated digital images of the models, while the fourth had no access to the images, and determined the shapes using an algorithm developed from the dimensions of the studied segments. Rates and confidence intervals were determined, and Fleiss' Kappa was calculated to assess the agreement among the evaluators who worked with the images and among all of them. Average incisor length was 10 mm, and widths at CD and EF were 7.35 mm (0.65) and 8.27 mm (0.58), respectively. Regarding shapes, 51.58% (47.90-55.20) of the incisors were identified as square, 18.02% (14.50-21.90) as ovoid and 30.41% (30.00-30.90) as triangular. Fleiss' Kappa agreement was 0.71 (0.62-0.80). The application of the proposed algorithm provided a considerable level of agreement among the observers. Regarding tooth size, both the average segment length and the proportions were similar to those reported by various authors.

Equation for Tooth Size Prediction from Mixed Dentition Analysis for Taiwanese Population: A Pilot Study

Background: In mixed dentition analysis, estimation of the mesiodistal width of unerupted permanent canines and premolars is essential for successful diagnosis and treatment planning. The present study aimed to develop a simple linear equation to predict permanent tooth sizes from mixed dentition analysis for Taiwanese people. Methods: The sample comprised 200 dental casts, derived from Taiwanese patients (100 males and 100 females; age, 12–35 years). Mesial distal tooth widths were measured in dental casts with a digital caliper. A student’s t-test was conducted to detect tooth size correlations with gender-specific differences, as well as intra-arch counterparts. Standard linear regression was conducted to develop a simple equation representing predictions of canine-premolar relationships. Results: All teeth were not significantly different between the left and right sides, regardless of gender and upper or lower arches. In terms of types of teeth, males had larger tooth dimensions in both arches than females. New regression equations for estimating the dimensions of the unerupted canines and premolars in the Taiwanese population were developed. Conclusions: Using a sample of Taiwanese people, new models derived for females and males separately were developed, which should provide highly accurate predictions for unerupted canines and premolars in the Taiwanese population.

Endodontic length measurements using 3D Endo, cone-beam computed tomography, and electronic apex locator

BACKGROUND

The objective of this study is to investigate the accuracy of the 3D Endo software, cone-beam computed tomography (CBCT) software, and the electronic apex locator (EAL) in endodontic length determination.

METHODS

302 root canals in 111 human extracted molars were chosen. Access cavity was performed, and root canal lengths were measured with a digital caliper for actual length (AL) and EAL for electronic length. Teeth were then scanned using CBCT device at voxel size of 0.10 mm. It measured root canal lengths using the CBCT (Romexis Viewer), 3D Endo for proposed length (3D-PL) and correct length (3D-CL). Mean differences between the four methods with the AL were calculated and compared. Fisher's exact test, paired t-test, Bland-Altman plot were used to test the differences among the experimental modalities in working length determination at the significance of 0.05.

RESULTS

The accuracy in the range of ± 0.5 mm of the EAL ProPex II was highest among the experimental modalities, however this method disagreed with the actual length.

CONCLUSIONS

The correct working length after adjustment from the semi-automatically length by the 3D Endo software and Romexis Viewer measurements agreed with the AL.

FGF10 and FGF13 genetic variation and tooth-size discrepancies

OBJECTIVES

To explore whether variations in odontogenesis-related genes are associated with tooth-size discrepancies.

MATERIALS AND METHODS

Measurements of the width of permanent teeth were obtained from dental casts of 62 orthodontic patients (age 15.65 ± 6.82 years; 29 males and 33 females). Participants were classified according to the anterior and overall Bolton ratios as without tooth-size discrepancy or with maxillary or mandibular tooth-size excess. Genomic DNA extracted from buccal cells was used, and 13 single nucleotide polymorphisms (SNPs) across nine genes were genotyped by polymerase chain reaction using TaqMan chemistry. χ2 or Fisher exact tests were applied to determine the overrepresentation of genotypes/alleles depending on the type of tooth-size discrepancy (α = .05; corrected P value: P < 5.556 × 10-3). Odds ratios (ORs) and their correspondent 95% confidence intervals (CIs) were also calculated to investigate the risk of this phenotype for the SNPs having significant association.

RESULTS

Individuals carrying the FGF10 rs900379 T allele were more likely to have larger mandibular teeth (OR = 3.74; 95% CI: 1.65-8.47; P = .002). This effect appeared to be stronger when two copies of the risk allele (TT) were found (recessive model, OR = 6.16; 95% CI: 1.71-22.16; P = .006). On the other hand, FGF13 rs5931572 rare homozygotes (AA, or male A hemizygotes) had increased risk of displaying tooth-size discrepancies when compared with the common homozygotes (GG, or male G hemizygotes; OR = 10.32; 95% CI: 2.20-48.26; P = .003).

CONCLUSIONS

The results suggest that FGF10 and FGF13 may contribute to the presence of tooth-size discrepancies.

Determination of Root Canal Length Up to Perforation Area Using Different Electronic Apex Locators and CBCT Images Obtained at Different Voxel Sizes: A Comparative Ex Vivo Study

OBJECTIVE

To compare the accuracy of electronic apex locators in the presence of blood and CBCT images obtained with two different voxel sizes (0.125 mm and 0.25 mm) in determining root canal length up to the perforation area.

METHODS

Forty extracted, single-rooted human teeth were selected and an artificial root perforation (0.4 ± 0.1 or 1.0 ± 0.2 mm diameter) was created in the middle third of the root. The actual root canal length up to the perforation area was determined under a stereomicroscope. CBCT images were obtained with a voxel size of 0.125 mm and 0.25 mm. The root canal length up to the perforation area was measured on CBCT images and recorded as the radiographic length. The teeth were embedded in alginate and root canal length up to the perforation area was measured using two different EALs (DentaPort ZX [Morita, Tokyo, Japan] and Gold Reciproc motor [VDW, Munich, Germany]) and recorded as the electronic length.

RESULTS

In teeth with an artificial root perforation 0.4 mm in diameter, the measurements obtained with DentaPort ZX were more accurate than with the Gold Reciproc motor (P ˂ 0.05), and on CBCT images, more accurate measurements were obtained with a voxel size of 0.125 mm compared to 0.25 mm (P ˂ 0.05). In teeth with an artificial root perforation 1.0 mm in diameter, the radiographic length was closer to actual length than the electronic length (P ˂ 0.05).

CONCLUSION

In artificial root perforations with a diameter of 0.4 mm, CBCT gives more reliable results than EALs. Both EAL and CBCT measurements were closer to actual length in artificial perforations that were 1.0 mm in diameter.

Evaluation of Maxillary Anterior Teeth Width and Their Relation to the Calculated Values for Smile Designing

AIM AND OBJECTIVE

The present study was conducted to determine the golden proportion, golden mean, and the Preston proportion of the individuals between the widths of six maxillary anterior teeth and to determine which proportional formula exists in the population.

MATERIALS AND METHODS

This study was conducted among 60 participants between 18 years and 30 years of age with an esthetic smile. They were grouped into 30 females and 30 males. Maxillary arch impressions were made using irreversible hydrocolloid material from each individual. The width of the anterior teeth on the graph paper was analyzed by using digital vernier caliper. The data were statistically analyzed by one way ANOVA test.

RESULTS

The study revealed that the formula of golden proportion and golden mean had no statistical differences between males and females but the Preston proportion has shown statistical differences in the total population.

CONCLUSION

From the current study, it was concluded that the formulas of golden mean and golden proportion proposed by Ward can be used for smile designing and full mouth rehabilitations.

CLINICAL SIGNIFICANCE

Demand for smiles has gained its importance with time. The golden proportion, golden mean, and the Preston proportion are the guidelines used by the professional for better esthetic proportion in the dentition.

Evaluation of Dental Crowding and Spacing in Relation to Tooth Size and Arch Dimensions in a Sample of Sudanese Adults

AIMS AND OBJECTIVES

This study aimed to compare tooth size and arch dimensions between normal, crowded, and spaced groups in a Sudanese sample.

MATERIAL AND METHODS

A sample of 312 university students, were selected and divided into normal, crowded, and spaced groups. Each group included 104 students with equal males to females ratios. Age was ranged from 16 to 26 years. Mesiodistal (MD) tooth width of all teeth (except molars), arch perimeters, and dimension at the level of intercanine, interpremolar, and intermolar were measured for each group. ANOVA and student t-test were performed for the comparison between groups.

RESULTS

The MD dimensions of all teeth are greater in crowded arches as compared to the teeth in normal dental arches, except for the width of the maxillary, left second premolar in females, and mandibular left second premolar in male. Spaced arches were presented with significantly smaller MD width in all teeth when compared to normal arches, except for the width of maxillary right second premolar, maxillary left first premolar, mandibular right and left second premolars in female, and maxillary right second premolar in male. Crowded arches exhibit the largest total tooth material followed by normal and spaced dentition. Spaced arches show the widest arch dimension and perimeters followed by normal and crowded dentitions.

CONCLUSIONS

Both tooth size and arch dimensions contribute to dental crowding and spacing.

CLINICAL RELEVANCE

Since the size of the teeth and dental arches affect the space availability of the dentition. These factors should be considered in the initial stages of orthodontic treatment planning to avoid compromised treatment outcomes.

The influence of periapical lesions on the repeatability of two electronic apex locators in vivo

OBJECTIVES

To determine the influence of periapical lesions on the repeatability of two electronic apex locators (EALs), Root ZX II, and RomiApex A-15, in maxillary anterior teeth, in vivo.

MATERIALS AND METHODS

After approval by the local ethics committee, 43 maxillary anterior teeth scheduled for root canal therapy were assigned to two groups. The periapical lesion (PAL) group included 21 teeth with necrotic pulps and radiographically visible periapical lesion, and the normal periapex (NPA) group consisted of 22 teeth with vital pulps and no periapical lesion. In each canal, Root ZX II and RomiApex A-15 were used to determine working length defined as the "zero" reading on the display. Two consecutive measurements were performed with each EAL on each tooth and a second operator measured the endodontic file with a digital caliper without knowledge of the EAL being used or the tooth diagnosis. The absolute value of the difference between the first and second measurement (measurement pairs) was calculated. Repeatability was evaluated by the Bland-Altman method, and an aligned ranks transformation ANOVA was conducted to compare the EALs.

RESULTS

The median absolute difference between measurement pairs was significantly lower (p < 0.001) and the limits of agreement were narrower in the NPA group. Among the EALs, median absolute differences were significantly smaller for Root ZX (p < 0.001).

CONCLUSIONS

Measurements were more repeatable when no periapical lesion was present. Root ZX showed better repeatability than RomiApex.

CLINICAL RELEVANCE

Periapical lesions seem to influence successive in vivo measurements with EALs.

[Esthetic proportions of maxillary anterior teeth of 120 Chinese adults]

OBJECTIVE

To analyze the esthetic proportions of maxillary anterior teeth in term of the apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown in 120 Chinese adults.

METHODS

Maxillary gypsum casts were obtained from the dental laboratories of stomatological hospitals in North China, Southeast China, and Southwest China, according to the inclusion criteria and exclusion criteria. Standardized digital photographs of each cast were recorded. The apparent widths and actual widths and heights of the central incisors, lateral incisors and canines were determined by ImageJ software for the calculation of apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown. The ideal apparent widths proportion (Golden proportion and Preston proportion) and width/height ratio (0.80) were tested. The gender, arch side, and regional differences were investigated.

RESULTS

The apparent widths proportion of the lateral/central incisor was 0.724±0.047, of the canine/lateral incisor was 0.814±0.092. The width/height ratio of the central incisor was 0.848±0.072, of the lateral incisor was 0.834±0.094, of the canine was 0.883±0.098. The esthetic proportions were different from the predicted ideal ratio (P < 0.001). The apparent widths proportion of lateral/central incisor was significantly larger in the right side than that in the left side (0.730± 0.044 vs. 0.718±0.050), and was significantly smaller in North China than that in Southwest China (0.711±0.051 vs. 0.731±0.044). The width/height ratio of the central incisor was significantly larger in the female than that in the male (0.855±0.074 vs. 0.835±0.068), and in the right side than that in the left side (0.855±0.073 vs. 0.842±0.072). The width/height ratio of the lateral incisor was significantly larger in the female than that in the male (0.843±0.097 vs. 0.817±0.084).

CONCLUSION

The apparent widths proportion of adjacent teeth and the width/height ratio of the clinical crown in Chinese adults are different from the foreigner's. The esthetic proportion parameters have significant population specificity, and the measurements cannot be generalized as well as it should be applied with caution.

Analysis of Crown Morphology and Gingival Shape in the Maxillary Anterior Dentition

From a sample of 108 periodontally healthy volunteers with different combinations of morphometric data related to maxillary central anterior teeth and the surrounding soft tissues, this article aims to categorize gingival phenotypes according to tooth and gingival parameters, as well as assess the relationships between tooth shape and gingival characteristics, such as the papillary height (PH) and faciolingual thickness (FLT) of the papilla base. The periodontal phenotypes of 108 volunteers were confirmed using the periodontal probe transmission method for Kan classification. The FLT, PH, and the crown width to crown length (CW/CL) ratio for maxillary anterior teeth were measured. K-clustering was used to classify the anterior tooth shape into three groups: triangular, square, and compound. The mean CW/CL ratio for the maxillary anterior tooth position of the thick phenotype was greater than that of the thin phenotype. The PH and FLT for the maxillary anterior interdental papillae were greater for the thin phenotype group than for the thick phenotype group. A negative correlation was observed between the CW/CL ratio and both PH and FLT (P < .05 for both). However, a significant positive correlation was observed between FLT and PH. CW/CL ratio, FLT, and PH were all associated with the gingival phenotype with significant statistical correlations (P < .05 for all). Triangular teeth were correlated with scallop-shaped gingiva in the faciolingual area, while square teeth were associated with a flat gingiva.

The landscape of tooth shape: Over 20 years of dental topography in primates

Diet plays an incontrovertible role in primate evolution, affecting anatomy, growth and development, behavior, and social structure. It should come as no surprise that a myriad of methods for reconstructing diet have developed, mostly utilizing the element that is not only most common in the fossil record but also most pertinent to diet: teeth. Twenty years ago, the union of traditional, anatomical analyses with emerging scanning and imaging technologies led to the development of a new method for quantifying tooth shape and reconstructing the diets of extinct primates. This method became known as dental topography.

Accuracy of electronic apical functions of a new integrated motor compared to the visual control of the working length-an ex vivo study

OBJECTIVES

To evaluate ex vivo the efficacy of the integrated motor Tri Auto ZX2 in controlling the apical extent of preparation compared to conventional visual control (CVC) of the working length (WL).

MATERIALS AND METHODS

Eighty standardized mandibular premolars were divided into five groups (n = 16). In the CVC group, instruments were used in continuous rotation (CR) and visual control performed by means of rubber stoppers. For each of the remaining groups, it was assigned a combination of a motion (CR or optimal torque reverse (OTR)), and an apical function (Auto Apical Reverse (AAR) or Optimum Apical Stop (OAS)). Root canals were prepared using the apical functions at 0.5 mark using an alginate model. Difference between the final WL and the actual length post-instrumentation was calculated. Data were analyzed statistically with the significance set at 5% (ANOVA, Tukey HSD).

RESULTS

There was no difference in the mean WL among the groups, except between the CR combined to OAS compared to CVC (P > 0.05). Although CVC resulted in two cases beyond the foramen, no significant difference was found among the groups when comparing the distributions of measurements (P > 0.05).

CONCLUSIONS

All combinations of motion and apical control functions of Tri Auto ZX2 provided an adequate apical limit ex vivo, similar to the visual control using rubber stoppers.

CLINICAL RELEVANCE

TriAuto ZX2 was efficient to control the apical extent of preparation dispensing the need for calibrating the files, regardless of the different settings. This motor might potentially prevent over-instrumentation by continuously monitoring the apical limit.

[Analysis of the relationship among maxillary anterior teeth width, anterior arch perimeter and anterior segment depth]

OBJECTIVE

To analyze the relationship between the width of the maxillary anterior teeth and the anterior arch perimeter, to analyze the change rule of the width of the anterior teeth and the anterior arch perimeter, when altered the convexity of the anterior arch, with the width of the maxillary anterior arch keeping constant, and to provide a reliable basis for later digitized and personalized aesthetic analysis of front teeth.

METHODS

In the study, 61 front teeth complete and well-arranged models had been selected from the working models after the prostheses in Department of Prosthodontics, Peking University School and Hospital of Stomatology, including 22 male models and 39 female models. A photograph was taken from the occlusal surface of each model using the fixed magnification with a single lens reflex camera. The width of anterior teeth, the width of anterior arch and the convexity of anterior arch had been measured using the Photoshop software. The ratio of the width of the anterior teeth to the width of the anterior arch was calculated. Keeping the width of anterior arch unchanged, the layer free transformation function used to add or decrease the curvature of the anterior arch from 1-5 mm, each circumference of the anterior arch was measured. According to the proportion of their anterior teeth in the anterior arch perimeter, the width of each anterior teeth crown under different convexities of anterior arch was calculated. SPSS 23.0 was used to analyze the ratio of the width anterior teeth to the anterior arch perimeter and correlation between the convexity of the anterior arch and the width of the anterior teeth.

RESULTS

The percentages of the median length of the anterior arch in the central incisor, lateral incisor and canine were 36.2%±1.3%, 30.2%±1.5%, and 33.6%±1.4%, respectively. The proportions were normal distributions and not related to the perimeter of the anterior arch. When the width of the anterior arch was constant, there was a positive correlation between the convexity of anterior arch in the range of 5 mm and the width of anterior teeth or the front arch circumference. With each increase or decrease of 1 mm of the convexity of anterior arch, the width of the middle incisor increased or decreased by about 0.18 mm, the half circumference of the anterior arch increased or decreased by about 0.50 mm.

CONCLUSION

The width of the anterior teeth in the middle-distal direction remained stable in the anterior arch circumference. Within a certain range, when the width of the maxillary anterior arch remains unchanged, the width of the anterior teeth and the perimeter of the anterior teeth are positively correlated to the convexity of the anterior arch.

Analysis of tooth anatomy in adults with ideal occlusion: A preliminary study

INTRODUCTION

The aim of this study was to investigate the vestibular anatomy of teeth in samples of adult Italian and Mozambican subjects in ideal occlusion and permanent dentition and identify any anatomic characteristics that may influence bonding in the straight-wire technique.

METHODS

Linear measurements and coordinates of each curve representing the clinical crown height and width of each tooth were acquired from digital models of each subject categorized to 1 of 2 groups: Italian (18 males, 22 females; mean age, 29.6 ± 5.7 years) or Mozambican (14 males, 15 females; mean age, 23.4 ± 5.9 years). All subjects had normal dentition and no previous orthodontic treatment, fillings, or prostheses. Method error and systematic error were calculated according to the Dahlberg formula (S² = ∑ d²/2n) and dependent Student t test (P <0.05), respectively. Tooth symmetry was investigated through a paired-samples t test (P <0.05) and sex difference via an independent-samples t test (P <0.05). After neither asymmetry nor sexual dimorphism was found, all data were pooled, inverting the signs of the X coordinates and then mirroring data. Subsequently, a 2-samples t test (P <0.05) and a multivariate cluster analysis were performed on the mirrored data to compare the 2 groups and to identify any within-group diversity for number of clusters for each tooth. Means of all linear measurements and coordinates (crown height and width) calculated for each cluster were reported and compared using a standard 2-samples t test (P <0.05).

RESULTS

Two clusters were identified for the maxillary second premolars and molars in Italian subjects, whereas in the Mozambican subjects, there were 2 clusters for the maxillary first premolars and lateral incisors and 3 clusters for the maxillary canines and central incisors. The mandibular arch was remarkably homogeneous, with only 1 cluster per tooth in each group. In the mandibular arch, statistical differences were recorded between ethnic groups in crown height at the central incisors and second molars and in crown width in the sector from the second premolar to the second molar.

CONCLUSIONS

There were considerable differences both between and within racial groups in crown height, crown width, and numbers of clusters, which should be taken into account during bonding. Although single-bracket placement guides specific for ethnicity may be feasible for the mandibular arch, the significant diversity in number of clusters in the maxillary arch indicates that more accurate bracket placement guides that take into account such heterogeneity are required.

Applicability of the Existence of Golden Standard and Golden Percentage in the Population of Jaipur, Rajasthan, India: A Comparative Study

AIM

An evaluation for the existence of the golden percentage and golden standard in Jaipur population: a comparative study.

MATERIALS AND METHODS

Sample includes a total of 300 dentulous casts of participants including 150 males and 150 females. The cast belongs to the students, patients, and their attendants of Jaipur origin by birth who visited the Jaipur Dental College and Hospital. The width and height of maxillary teeth were measured by using a digital caliper. A grid was used to measure apparent widths of teeth. Student's t test was used to analyze the data using SPSS for Windows software (version 21) at the level of significance p < 0.05.

RESULTS

The mean and standard deviation (SD) for the golden percentage of right and left central incisors, right and left lateral incisors, and for right and left canines was found to be statistically significant from the ideal golden percentage (p < 0.05). The difference between mean and SD of the golden standard for right and left central incisors from the standard (80%) was statistically significant (p < 0.05).

CONCLUSION

The golden percentage and golden standard did not exist in Jaipur population.

CLINICAL SIGNIFICANCE

The result of this study shows deviation from the ideal golden percentage and golden standard for Jaipur population which can be used clinically as a guideline for esthetic results.

Assessing the accuracy of two posterior tooth-size discrepancy prediction methods based on virtual occlusal setups

OBJECTIVE

To assess accuracy of the Bolton and Johnson/Bailey (JB) analyses in identifying clinically significant posterior tooth-size discrepancies using virtually constructed occlusal setups.

MATERIALS AND METHODS

Virtual models and cone-beam computed tomography data sets from 30 patients were utilized to construct 60 (two per patient) virtual posterior occlusal setups. Observed discrepancies in cusp-embrasure relationships were compared to estimated posterior interarch tooth-size discrepancies (ITSDs) calculated via Bolton and JB posterior analyses. Clinical significance for discrepancies was established at >1 mm from ideal cusp-embrasure relationships in accordance with current American Board of Orthodontics methodology. Data within groups were normally distributed, thus comparisons were completed via paired t-tests. Paired nominal data were analyzed utilizing McNemar's test, and simple linear regression was used to model the relationship of predicted to observed discrepancies.

RESULTS

McNemar's test revealed significant differences (P ≤ .05) between the Bolton and JB groups' frequencies in matching the virtual setups correctly. JB predictions matched 100% (right) and 97% (left) setups; whereas, Bolton predictions matched only 23% (right and left) setups. A positive correlation was observed between JB predictions and cusp-embrasure discrepancies, demonstrating that average posterior discrepancy values increased 0.28 mm for every 1 mm predicted via the JB analysis.

CONCLUSIONS

The JB analysis correctly characterized, but overestimated, the degree of posterior ITSDs corresponding to a clinically significant discrepancy in the virtual setups. Algebraically calculated posterior ITSDs based on the Overall and Anterior Bolton ratios were not accurate predictors of discrepancies observed in the virtual setups. Both Bolton and JB demonstrated weaknesses that limit precise identification of clinically significant ITSDs.

Comparison of Accuracy and Reliability of Working Length Determination Using Cone Beam Computed Tomography and Electronic Apex Locator: A Systematic Review

AIM

To compare the accuracy and reliability of cone beam computed tomography (CBCT) and electronic apex locator (EAL) in determining the working length (WL).

BACKGROUND

A comprehensive literature search was conducted across several databases and gray literature. A total of 1,358 potentially relevant journal articles were identified with publication dates ranging from 1996 to 2017. After screening and applying the inclusion and exclusion criteria, five studies were identified as eligible for review. Data extraction was completed in two blinded pairs, cross-referenced and subsequently merged. Discrepancies were resolved through collaborator mediation. Meta-analysis was not undertaken due to heterogeneity between included studies.

REVIEW RESULTS

In all five studies, no statistically significant difference was found between CBCT and EAL measurements of WL. The reliability of CBCT compared with EAL was not determined.

CONCLUSION

Due to significant heterogeneity between the included studies, the accuracy of CBCT compared to EAL couldn't be determined. Based on limited evidence, CBCT appeared to be as accurate as EAL. There was weak evidence suggesting that CBCT was reliable. Also the superiority of one method over the other could not be determined. These results should be interpreted judiciously. Further research is required to conclusively evaluate the accuracy and reliability of CBCT compared with EAL.

CLINICAL SIGNIFICANCE

Preexisting CBCT scans may be appropriate for WL determination but acquiring a new CBCT for endodontic treatment is inadvisable due to cost and the as low as reasonably achievable (ALARA) principle.

A Review on Comparison of Tooth Size Discrepancies among Angle's Class I, II, and III Malocclusion: Is There a Significance?

AIM

The contemporary article aims to review and compare various literatures concerning different conclusions regarding the correlation between tooth size discrepancy (TSD) and Angle's malocclusion groups.

BACKGROUND

Acquiring the ideal occlusion plays one of the major roles while designing the treatment plan for an orthodontic patient, any alterations in the individual tooth sizes are called TSD and will hinder this prime requirement. By determining the correct tooth size ratio, it further helps in acquiring the accurate interdigitation, balanced occlusion, and also predicting the orthodontic treatment results. Various investigations were carried out to know the correlation between tooth size discrepancies and different malocclusion groups, of which, a few reported a statistically significant difference whereas others reported no significant difference.

REVIEW RESULTS

A computerized database quest was operated utilizing the Medline database (Pubmed/Medline) for original research and review articles. Publications between 1946 and 2018 were included. Four hundred twenty-one articles were recovered from database search and, among them, 66 articles were selected to review the full-article.

CONCLUSION

Although a comparison was done between the tooth-size ratios and malocclusion groups (classes I, II, and III), many investigators noted no significant difference but there is an inadequacy in the data particularly related to subgroups of Angle's classification of malocclusion among these investigations; therefore, further studies are required to interpret this correlation.

CLINICAL SIGNIFICANCE

As there is high incidence of tooth size discrepancies noted in the previous literature orthodontist, Bolton's analysis regardless of malocclusion group, sex, and ethnicity is highly recommended.

Tooth crown mesiodistal measurements for the determination of sexual dimorphism across a range of populations: A systematic review and meta-analysis

OBJECTIVE

The aim of this study was to determine whether the tooth crown sexual dimorphism pattern reported in previous small studies can be generalized for a broader range of populations.

LITERATURE REVIEW

A systematic literature review was performed by two independent examiners. The following databases were searched from October 2015 to July 2016: PubMed, Scopus, Lilacs, ScienceDirect, Medline, and Cochrane Reviews. No language restrictions were applied to the search.

SELECTION CRITERIA

The inclusion criteria comprised original studies investigating mesiodistal permanent teeth that reported the sample population and standard deviation. All right-sided teeth, except the third molars, were measured and separated by sex in the included studies. Thirty-one studies were included in the quantitative data synthesis and meta-analysis. Studies of non-human teeth, skeletal remains, or an overly specific study population were excluded.

MAIN RESULTS

Thirty-one trials, involving 6481 participants, provided data for the meta-analysis of teeth. Sexual dimorphism in mesiodistal crowns was found in all teeth across a range of populations, principally in lower canines (5.73%) and maxillary canines (4.72%), followed by the lower second molars (3.54%) and upper second molars(3.20%), and finally in the lower first molars(3.14%) and upper first molars(2.64%).

CONCLUSIONS

A small degree of sexual dimorphism exists in all human teeth. Second molars and canines show the greatest sexual dimorphism. Additionally, smaller racial differences are present in mesiodistal crowns among groups living in different geographic areas; however, it is not possible to establish a single value applicable for all populations.

Relationship between different points on the face and the width of maxillary central teeth in a Turkish population

STATEMENT OF PROBLEM

Dentists may have difficulty determining the appropriate widths of the maxillary central incisors (CW) when restoring teeth for patients with edentulism. Anthropological measurements can help.

PURPOSE

The purpose of this observational study was to evaluate the relationship between different anthropological distances on the face and the CW in a young Turkish population.

MATERIAL AND METHODS

A total of 210 Turkish dental students without dental and facial deformities participated in this study. Two different digital photographs of their face (relaxed and smiling) were taken. The intercommissural width (ICW), intermedial canthus width (MCW), interlateral canthus width (LCW), interpupillary width (IPW), interalar width (IAW), and CW were measured. The t test, Pearson correlation analysis, and multiple linear regression analysis were performed to determine the relationship between facial measurements and CW (α=.05).

RESULTS

A significant correlation was found between facial measurements (r=0.516[ICW], r=-0.534[IAW], r=-0.639[MCW], r=-0.599[LCW], and r=-0.683[IPW]) and CW in both sexes. All facial measurements, except ICW and IPW in women and MCW in men, had a significant effect on CW according to the multiple linear regression analysis.

CONCLUSIONS

IAW and LCW can be used to determine CW in both sexes. The ICW and IPW can be specific anthropological measurements for men, and the MCW can be a specific anthropological measurement for women to determine CW.

Genetic contributions to dental dimensions in brown-mantled tamarins (Saguinus fuscicollis) and rhesus macaques (Macaca mulatta)

OBJECTIVES

The use of dental metrics in phylogenetic reconstructions of fossil primates assumes variation in tooth size is highly heritable. Quantitative genetic studies in humans and baboons have estimated high heritabilities for dental traits, providing a preliminary view of the variability of dental trait heritability in nonhuman primate species. To expand upon this view, the heritabilities and evolvabilities of linear dental dimensions are estimated in brown-mantled tamarins (Saguinus fuscicollis) and rhesus macaques (Macaca mulatta).

MATERIALS AND METHODS

Quantitative genetic analyses were performed on linear dental dimensions collected from 302 brown-mantled tamarins and 364 rhesus macaques. Heritabilities were estimated in SOLAR using pedigrees from each population, and evolvabilities were calculated manually.

RESULTS

Tamarin heritability estimates range from 0.19 to 0.99, and 25 of 26 tamarin estimates are significantly different from zero. Macaque heritability estimates range from 0.08 to 1.00, and 25 out of 28 estimates are significantly different from zero.

DISCUSSION

Dental dimensions are highly heritable in captive brown-mantled tamarins and free-ranging rhesus macaques. The range of heritability estimates in these populations is broadly similar to those of baboons and humans. Evolvability tends to increase with heritability, although evolvability is high relative to heritability in some dimensions. Estimating evolvability helps to contextualize differences in heritability, and the observed relationship between evolvability and heritability in dental dimensions requires further investigation.

Assessment and correlation of gingival angle, gingival zenith angle, and gingival thickness: a cross-sectional study

BACKGROUND

In the maxillary esthetic zone, gingival tissue characteristics play an important role in designing and achieving a beautiful smile. The gingival line, gingival angle (GA), and gingival zenith angle (GZA) can provide an insight into the dimensional soft tissue requisites in procedures involving reconstruction of the papillae and gingival margins. The hypothesis of the present study was that these parameters could be influenced by an individual's gender and age.

PURPOSE

The present study aimed to evaluate the GA, GZA, and gingival thickness (GT) in the maxillary anterior teeth and to correlate these findings with the age and gender of the study patients.

MATERIALS AND METHODS

In 160 periodontally healthy patients equally divided into two groups (Group I: 21 to 40 years; Group II: 41 to 60 years) with equitable gender distribution were evaluated for the parameters of GA, GZA, and GT in the maxillary anterior teeth.

RESULTS

The mean values of GA and GZA were consistently lower for female patients in both the age groups for the three tooth types - central incisor (CI), lateral incisor (LI), and canine (CA). The mean GT values for females and males in Group I was 1.15 ± 0.21 and 2.56 ± 0.26 mm, while for Group II it was 1.13 ± 0.21 and 2.54 ± 0.27 mm, respectively, indicating the presence of a thick gingival biotype in males.

CONCLUSION

The results of the present study reveal that GA and GZA are greater in males than in females, irrespective of age. A significantly higher GT was observed in males than in females. However, there was no evident direct correlation between GA and GZA or between GZA and GT.

Maxillary Anterior Teeth Proportions for Creating Esthetically Pleasuring Smile in Nepalese Patients

NA.

Assessment of gingival zenith position and its level relative to age and gender in maxillary anterior teeth

OBJECTIVE

The gingival tissues surrounding the maxillary anterior teeth play a pivotal role in fostering a beautiful smile. The gingival zenith position (GZP) and its spatial orientation in the mesiodistal and apicocoronal direction can provide a valuable reference point. The present study was undertaken to evaluate the GZP and gingival zenith line (GZL) in maxillary anterior teeth in different age groups and genders.

METHOD AND MATERIALS

The study population comprised 124 periodontally healthy patients equally divided into 21 to 40 years (Group I) and 41 to 60 years (Group II) age groups and gender distribution. The parameters of vertically bisected midline (VBM), GZP, and GZL were evaluated for all the teeth.

RESULTS

The GZP was distally placed in 54.68% and 78.12% of the central incisors for males and females in Group I, while in Group II it was 65.62% and 75.00% respectively. The majority of lateral incisors and canines had coincidence of the GZP and VBM. The GZL was found to be at an apical position with reference to the GZP of lateral incisors.

CONCLUSION

A distal deviation of GZP was observed for central incisors, while the GZP coincided with the VBM for lateral incisors and canines. The GZL was apically placed in relation to the GZP of lateral incisors. These elements can be taken up as reference points in periodontal and restorative procedures.

Dental arch dimensions, form and tooth size ratio among a Saudi sample

Objectives:

To determine the dental arch dimensions and arch forms in a sample of Saudi orthodontic patients, to investigate the prevalence of Bolton anterior and overall tooth size discrepancies, and to compare the effect of gender on the measured parameters.

Methods:

This study is a biometric analysis of dental casts of 149 young adults recruited from different orthodontic centers in Jeddah, Saudi Arabia. The dental arch dimensions were measured. The measured parameters were arch length, arch width, Bolton’s ratio, and arch form. The data were analyzed using IBM SPSS software version 22.0 (IBM Corporation, New York, USA); this cross-sectional study was conducted between April 2015 and May 2016.

Results:

Dental arch measurements, including inter-canine and inter-molar distance, were found to be significantly greater in males than females (p<0.05). The most prevalent dental arch forms were narrow tapered (50.3%) and narrow ovoid (34.2%), respectively. The prevalence of tooth size discrepancy in all cases was 43.6% for anterior ratio and 24.8% for overall ratio. The mean Bolton’s anterior ratio in all malocclusion classes was 79.81%, whereas the mean Bolton’s overall ratio was 92.21%. There was no significant difference between males and females regarding Bolton’s ratio.

Conclusion:

The most prevalent arch form was narrow tapered, followed by narrow ovoid. Males generally had larger dental arch measurements than females, and the prevalence of tooth size discrepancy was more in Bolton’s anterior teeth ratio than in overall ratio.

Canine and Premolar Root Dimensions in Chinese. A Reference for Osteoodontokeratoprosthesis Surgery

PURPOSE

Osteoodontokeratoprosthesis (OOKP) surgery is used to restore vision in end-stage corneal disorders, where an autogenous tooth supporting an optical cylinder is implanted through the cornea under a buccal mucosal graft. The ideal tooth for OOKP is a healthy single-rooted permanent tooth with sufficient buccolingual/palatal root diameter to accommodate an optical cylinder. The aim of this study was to determine the buccolingual/palatal diameters of canine and premolar roots in Chinese, for selection of teeth for OOKP surgery.

DESIGN

This was an anatomical study on root dimensions of extracted intact teeth.

METHODS

Extracted canine and premolar teeth (excluding maxillary first premolars) were collected and the buccolingual/palatal and mesiodistal diameters of the root at the cervical line and at 2-mm intervals below the cervical line were measured with Vernier calipers. Other measurements included total tooth length, crown buccolingual/palatal diameter, and root length. Mean and minimum buccolingual/palatal root diameters were compiled for each 2-mm interval.

RESULTS

A total of 415 extracted teeth (198 male, 217 female) were collected and measured. Recorded dimensions of keratoprostheses in 55 previous OOKP surgeries were used to establish acceptable lamina dimensions to ascertain root size adequacy. Premolars in Chinese female patients were undersized in a small minority. Minimal dimensions of teeth were insufficient if at 6 mm root level, the buccolingual/palatal width was less than 5 mm, or the mesiodistal width was less than 3 mm. This was noted in female mandibular first premolars (5.6%), maxillary second premolars (4.5%), and mandibular second premolars (1.5%).

CONCLUSIONS

Canines have adequate dimensions for OOKP surgery. However, premolars in Chinese females may be undersized in a small minority.

Evaluation of Alveolar Bone Support of the Permanent Canine in Cleft and Noncleft Patients

Objective:

To quantitatively compare the alveolar bone support ratio of the permanent canine in cleft patients who received secondary alveolar bone graft with that of the population without clefts.

Design:

Retrospective study utilizing periapical radiographs of the subjects with and without clefts.

Setting:

Hospital and university based.

Patients:

Eighteen unilateral and 9 bilateral cleft patients who had secondary bone graft procedures.

Main Outcome Measures:

Alveolar bone support of the permanent canine utilizing the ratio of bone height to root length.

Results:

Average bone support for the permanent canine was 88.55% in patients with clefts and 95.59% in patients with no history of clefts. This difference was statistically significant. There was no statistically significant difference in alveolar bone support ratio between the unilateral and bilateral cleft patients.

Conclusions:

Although alveolar bone support was significantly higher in the noncleft control group, a successful level of alveolar bone support was achieved for the permanent canine on the cleft site after secondary bone graft. There was no difference in alveolar bone support achieved for the permanent canine whether the type of the cleft was unilateral or bilateral.

The Crown Size and Sexual Dimorphism of Permanent Teeth in Jordanian Cleft Lip and Palate Patients

Objective:

To provide a detailed description of crown size dimensions in the permanent dentition of Jordanian cleft lip and palate patients and to compare the findings with those of other populations.

Method:

The mesiodistal crown diameters of the permanent teeth of 47 patients with unilateral cleft lip and palate (UCLP), 25 patients with bilateral cleft lip and palate (BCLP), and 74 controls were measured.

Results:

The cleft group (UCLP and BCLP patients) generally demonstrated a smaller tooth size for both the maxillary and mandibular arches than did the control group. A sexual dimorphism pattern with males having larger teeth than females was observed for controls and UCLP patients. More males with BCLP had smaller teeth than did females. In the maxilla, the UCLP cleft-side teeth showed the largest percentage (4%) of sexual dimorphism, whereas the BCLP teeth achieved the highest percentage (3.4%) in the mandible. The UCLP cleft-side maxillary lateral incisors (13.2%) and BCLP mandibular canines (6%) displayed greater sexual dimorphism in crown size than did any other tooth class.

Conclusions:

Tooth size reduction occurred across all permanent tooth types and among early and late-forming teeth in cleft patients compared with the controls. This reduction was more pronounced in the maxillary incisor field. Males with UCLP and control males had larger teeth than did females, whereas a reversal of the normal dimorphism pattern was observed in patients with BCLP.

Reconstructing human population history from dental phenotypes

Dental phenotypic data are often used to reconstruct biological relatedness among past human groups. Teeth are an important data source because they are generally well preserved in the archaeological and fossil record, even when associated skeletal and DNA preservation is poor. Furthermore, tooth form is considered to be highly heritable and selectively neutral; thus, teeth are assumed to be an excellent proxy for neutral genetic data when none are available. However, to our knowledge, no study to date has systematically tested the assumption of genetic neutrality of dental morphological features on a global scale. Therefore, for the first time, this study quantifies the correlation of biological affinities between worldwide modern human populations, derived independently from dental phenotypes and neutral genetic markers. We show that population relationship measures based on dental morphology are significantly correlated with those based on neutral genetic data (on average r = 0.574, p < 0.001). This relatively strong correlation validates tooth form as a proxy for neutral genomic markers. Nonetheless, we suggest caution in reconstructions of population affinities based on dental data alone because only part of the dental morphological variation among populations can be explained in terms of neutral genetic differences.

Prediction of Un-erupted Canine and Premolar Tooth Size in Mixed Dentition among Bangladeshi Population

Accurate prediction of the space available to accommodate the size of the un-erupted canines and premolars plays an important role in mixed dentition in Orthodontics. This Descriptive cross sectional study was carried out in the Department of Orthodontics of Bangabandhu Sheikh Mujib Medical University from July 2014 to June 2015. Dental study models of 140 patients were taken as sample. The sample was consisted of 54 Bangladeshi males and 86 females aged between 12 to 17 years and without any previous orthodontic treatment fully erupted permanent teeth and with no dental anomalies were recruited. The study was done by measuring the mesio-distal dimensions of teeth over the dental cast. A pre-structured data collection form which includes the particulars of the patient and data was filled. All patients were having a serial number to maintain their confidentiality. The study protocol was approved by "Institutional Review Board" of Bangabandhu Sheikh Mujib Medical University (BSMMU), Dhaka, Bangladesh. Un-paired t test were used to examine differences between genders, correlation coefficients and linear regression equations were used to carry out the analysis. Descriptive statistics including means, standard deviations, and minimum-maximum values were calculated. Unpaired sample 't' tests were carried out to compare tooth size between the sexes. Logistic regression for development of new prediction formula on the basis of study sample of our population. Pearson correlation coefficient test for found the correlation between mandibular incisors and mandibular and maxillary canine and premolars in each quadrant. The difference between the present study with that of Moyers and Tanaka and Johnston were statistically significant (p<0.001). The values from Moyers and Tanaka and Johnston methods exceed while comparing to Bangladeshi population. Therefore, Moyers and Tanaka and Johnston method of prediction are not applicable for our population.

[Comparison of the accuracy of measuring root canal working length in 3 different ways]

PURPOSE

To compare the accuracy of measuring root canal working length with two different electronic apex locators and digital X-ray.

METHODS

Ninety patients treated from January 2015 to June 2016 were selected, 232 root canals in total were randomly divided into 3 groups: X-ray group, Raypex5 group and i-root group. The accuracy of working length measured was assessed according to the filling quality of related main tips. The data were analyzed with SPSS19.0 software package for Chi-square test.

RESULTS

The success rates for root canal filling of X-ray group, Raypex5 group and i-root group were 88.5%, 92.9% and 96.1% respectively with no significant difference between 3 groups (P>0.05). The success rates for root canal filling of molar teeth, premolar teeth and front teeth were 92.5%, 96.6% and 95.2% respectively with no significant difference between the 3 groups (P>0.05).

CONCLUSIONS

The clinical effect of Raypex 5 and i-root electronic apex locators for working length measuring is similar to that of conventional X-ray, but the use of electronic apex locators can avoid unnecessary ionizing radiation and improve clinical efficiency.

[Measurement of anterior teeth widths in 236 Uygur teenagers]

PURPOSE

In order to provide reference for orthodontic and esthetic dentistry, we measured anterior teeth widths, and analyzed the ratio between the teeth in 236 Uygur teenagers.

METHODS

Two hundred and thirty-six samples were selected from Uygur population,Vernier calipers was used to measure the widths of the anterior teeth. SPSS21.0 software package was used for independent sample t test, paired t test and REG regression.

RESULTS

Except for mandibular lateral incisors, significant difference was observed in anterior teeth widths between males and females, the ratio between the upper and lower central incisors in males was nearly 1.618; the ratio between upper central incisor and lower central incisor, upper central incisor and lower lateral incisor, upper canine and lower lateral incisor in females was not approaching 1.618, i.e. There was no "golden proportion". There was significant correlation between anterior teeth of Ugyur teenagers.

CONCLUSIONS

No "golden proportion" was found in anterior teeth widths of Ugyur teenagers, but a specific ratio exists.