In-vitro-Studie zur Untersuchung eines neuen Speichelersatzmittels (Saliva natura®) auf Schmelz und Dentin

BACKGROUND

Hyposalivation is an important chronic side effect of radiotherapy in the head and neck area, and patients often alleviate their symptoms using saliva substitutes. The aim of this study was to evaluate the effects of two commercially available saliva substitutes (Saliva natura and Glandosane) on the mineral loss of bovine enamel and dentin in vitro. An aqueous remineralization solution served as control.

METHODS

Each 45 bovine enamel and dentin specimens were prepared. Prior to (control of sound dentin) and after (control of demineralized dentin) demineralization (37 degrees C; enamel: pH 4.95; 14 d; dentin: pH 5.0; 7 d) one third of each specimens surface was covered with nail varnish. Subsequently, the specimens (n = 15) were exposed to Glandosane and Saliva natura as well as a remineralization solution for 14 days (37 degrees C). Specimens were examined using transversal microradiography.

RESULTS

Compared to Saliva natura and the reminerlization solution, Glandosane induced both significantly increased mineral losses as well as lesion depths of the enamel specimens (p < 0.05; ANOVA, Bonferroni). After exposure of the dentin specimens to Saliva natura a significantly increased mineral loss could be observed (p < 0.001), whereas no differences in mineral loss could be observed for the enamel specimens (p = 0.078; t-test).

CONCLUSIONS

Within the limitations of an in vitro study it can be concluded that Glandosane revealed a demineralizing potential on bovine enamel as well as on dentin and should not be recommended for dentate patients. Since Saliva natura has a demineralizing effect on dentin, a further improvement regarding the remineralizing capacity would be desirable.

Effect of a fluoridated food item on enamel in situ

After the consumption of food items prepared with fluoridated salt elevated fluoride concentrations can be observed in saliva, whereby enamel mineralization is supposed to be positively affected. The aim of this double-blind (with respect to fluoride), placebo-controlled, randomized, cross-over study was to evaluate the effects of the consumption of either a fluoridated (effect) or a placebo food item on the mineral content of sound and pre-demineralized human enamel in situ. During both phases of the study 8 enamel specimens in each of 10 intraoral appliances were positioned, either recessed or flush with the acrylic surface. One of the flanges was brushed twice daily with fluoride-free toothpaste prior to the storage of the appliance in sucrose solution. The subjects were asked to refrain from other sources of fluorides except for the consumption of either a highly fluoride-containing (0.5 mg) or a placebo cookie (3 times daily) during the respective study phase. Mineral content and lesion depth were measured in the enamel specimens and fluoride concentrations in saliva and urine. Significantly increased urinary and salivary (immediately after food consumption) fluoride concentrations compared to baseline were observed during the effect phase. In the absence of fluorides more pronounced demineralization was observed, especially for the recessed specimens of both surface conditions. Brushing was shown to inhibit demineralization, particularly during the placebo phase. In conclusion, fluorides added to food items seem to be efficacious to inhibit enamel demineralization in plaque-covered enamel but might be less effective if oral hygiene is adequate.

Effect of various Ca2+/PO4(3-) concentrations of linseed-based saliva substitutes on enamel in vitro

Remineralization might be hampered by various polymers used in saliva substitutes. Thus, the present study evaluated the effects of various calcium and phosphate concentrations of linseed-based solutions on the mineral loss of pre-demineralized bovine enamel in vitro. A commercially available saliva substitute (Salinum) based on linseed was tested as well. Enamel specimens were prepared from bovine incisors and embedded in epoxy resin. One-third of each sample was covered with nail varnish (control of sound enamel). After demineralization (37 degrees Celsius; pH 5.0; 14 days) another third of the samples was nail-varnished again. Subsequently, the specimens (n = 10) were exposed to 12 linseed-based solutions (Ca(2+) addition 0-2 mM; PO4(3-) addition 0-3.2 mM) at pH 5.5 and 6.5 as well as to Salinum) for 14 days (37 degrees Celsius). The differences in mineral loss between the values prior to and after the storage in the various solutions were evaluated from microradiographs of thin sections (100 mum). The general linear model revealed a significant dependency for the mineral loss on 'calcium' (P = 0.003), but not on 'pH' (P = 0.397) and 'phosphate' (P = 0.094). Salinum) induced a significant greater mineral loss compared with equivalently saturated solutions (P < 0.05; anova, Bonferroni). The solution with the highest calcium and phosphate concentration showed the greatest mineral gain (P = 0.033; paired t-test). The addition of calcium and phosphate seems to have a positive effect on the remineralizing qualities of linseed-based saliva substitutes.

Resin infiltration of natural caries lesions

Infiltration of non-cavitated caries lesions with light-curing resins could lead to an arrest of lesion progression. The aim of this study was to evaluate the penetration of a conventional adhesive into natural enamel caries after pre-treatment with two different etching gels in vitro. Extracted human molars and premolars showing proximal white-spot lesions were cut across the lesions perpendicular to the surface. Corresponding lesion halves were etched for 120 sec with either 37% phosphoric acid gel (H(3)PO(4)) or 15% hydrochloric acid gel (HCl), and subsequently infiltrated with an adhesive. Specimens were observed by confocal microscopy. Mean penetration depths (SD) in the HCl group [58 (37) microm] were significantly increased compared with those of the H(3)PO(4) group [18 (11) microm] (p < 0.001; Wilcoxon). It can be concluded that etching with 15% hydrochloric acid gel is more suitable than 37% phosphoric acid gel as a pre-treatment for caries lesions intended to be infiltrated.

Surface layer erosion of natural caries lesions with phosphoric and hydrochloric acid gels in preparation for resin infiltration

The infiltration of proximal enamel lesions with low-viscosity light curing resins could be a viable approach to stop lesion progression. However, penetration of sealant might be hampered by the comparatively highly mineralized surface layers of natural lesions. Therefore, the aim of this study was to compare the efficacy of three different etching gels in removing the surface layer in various etching times. Extracted human molars and premolars showing proximal white spot lesions were cut across the demineralized areas. Ninety-six lesions expected from visual examination to be confined to the outer enamel (C1) were selected. The cut surface and half of each lesion were varnished, thus serving as control. Subsequently, the lesions were etched with either phosphoric (37%) or hydrochloric (5 or 15%) acid gel for 30-120 s (n = 8/group). Specimens were examined using confocal microscopy and transversal microradiography. Surface layer reduction was significantly increased in lesions etched with 15% HCl gel for 90 and 120 s compared to those etched with H(3)PO(4) gel for 30-120 s (p < 0.05). No significant differences regarding the depths of erosion in the lesions compared to sound enamel could be observed (p > 0.05). An effective reduction in the surface layer of natural enamel caries can be achieved by etching with 15% hydrochloric acid gel for 90-120 s.

Effects of luting agent and thermocycling on bond strengths to root canal dentine

AIM

To investigate the effects of luting agent and thermocycling on bond strengths to root canal dentine.

METHODOLOGY

Extracted maxillary canines (n =144) were root filled and divided into six groups of 24 teeth each. Fibre posts (FRC Postec) were inserted using six luting agents: Panavia F, Multilink, Variolink II, PermaFlo DC, RelyX Unicem and Clearfil Core. Each root was sliced into six discs (thickness 1 mm) representing the coronal, middle and apical part of the root canal. Push-out tests were performed 24 h after post insertion (n = 12) as well as after thermocycling (5000x; 5-55 degrees C, 30 s) (n = 12). Statistical analysis was conducted using analysis of variance (anova) followed by post-hoc comparisons (Tukey-B). The influence of thermocycling on bond strengths was investigated for each material and region separately using t-tests.

RESULTS

The bond strengths were significantly affected by the luting agent (P < 0.001), the root position (P = 0.003) and thermocycling (P < 0.001; three-way anova). RelyX had significantly higher bond strengths compared with all other materials (P < 0.05; Tukey-B). The apical region of the root canal had significantly higher bond strengths compared with the middle and coronal region (P < 0.05; Tukey-B). After thermocycling for RelyX a significant increase in bond strengths was detected for the middle and apical region (P < 0.01; t-test, Bonferroni factor 18).

CONCLUSIONS

Bond strengths were affected significantly by luting agent and root position. RelyX had higher bond strengths compared with other materials. The apical region of the canals was characterized by significantly higher bond strengths.

Microradiographic study on the effects of mucin-based solutions used as saliva substitutes on demineralised bovine enamel in vitro

Sialic acids and proteins bound to mucins are known to form complexes with calcium, and this mechanism may hamper the remineralization of calcium-containing mucin-based saliva substitutes. Thus, the aim of this investigation was to evaluate the effects of adding various concentrations of calcium phosphate to self-made mucin-containing solutions on demineralised bovine enamel in vitro. Bovine specimens were prepared, embedded in epoxy resin, and polished to 4000 grit. Subsequently, the surfaces of the specimens were partially covered with nail varnish, thus serving as a control of sound enamel, and demineralised (37 degrees C; pH 5.0) for 14 (19 groups; n=10) or 28 days (three groups; n=9). After demineralization, the specimens were exposed to mucin-based solutions (30 g/l) with various saturations with respect to apatites containing 0.1 mM NaF, CaCl(2) (0-20 mM) and KH(2)PO(4) (0-52 mM) at two different pH values (5.5 or 6.5). A fluoride-free solution and the commercially available saliva substitute Saliva Orthana (Orthana, Kastrup, Copenhagen Denmark) served as controls. The differences in mineral loss (DeltaDeltaZ) between the values prior to (DeltaZ(Demin)) and after storage (DeltaZ(Effect)) in the various solutions were evaluated from microradiographs of thin sections (100 microm). The general linear model revealed a significant dependency of DeltaDeltaZ for calcium (P=0.006), but not for phosphate (P=0.081) or pH (P=0.114). DeltaZ(Effect) was only significantly reduced compared with DeltaZ(Demin) in the group with the highest saturation with respect to hydroxyapatite (P<0.05; t-test). In conclusion, mucin-based saliva substitutes with an adequate composition are able to remineralize bovine enamel in vitro.

Effects of Irradiation on in situ Remineralization of Human and Bovine Enamel Demineralized in vitro

The objective of this study was to evaluate the effects of irradiation and surface condition on in situ remineralization of demineralized human and bovine enamel. Specimens (n=96) obtained from 24 human molars and 24 bovine incisors were prepared. The surfaces of half of the specimens were abraded while the others remained natural. Each of the 12 human and bovine abraded and sound specimens was irradiated fractionally up to 46.5 Gy (3.1 Gy/day, 5 days/week), while the remaining samples were not irradiated. Prior to and following the demineralization (pH 5.0; 14 days) all specimens were partly covered with nail varnish (control). After in vitro demineralization 2 irradiated and 2 nonirradiated specimens were inserted into both buccal aspects of 12 intraoral appliances, which were worn by 12 persons for a period of 6 weeks. All samples were brushed twice a day with a fluoride-containing toothpaste. Mineral analyses revealed a significant influence on mineral loss (DeltaZdemin), mineral gain (DeltaDeltaZ), lesion depth (LDdemin), and lesion depth reduction (DeltaLD) of the variables 'material' and 'irradiation' (p<0.05; ANOVA). Reciprocal interactions could be observed between these two variables for DeltaZdemin, DeltaDeltaZ, and LDdemin, due to significantly reduced values found for the irradiated, abraded bovine specimens compared to the nonirradiated ones (p<0.05; Bonferroni post hoc test). It can be concluded that neither irradiation nor abrasion influenced in vitro demineralization or in situ remineralization of the human specimens, whereas abrasion hampered demineralization in irradiated, bovine specimens.

Progression of Sealed Initial Bovine Enamel Lesions under Demineralizing Conditions in vitro

The use of sealants for the infiltration of proximal enamel lesions could be a promising alternative to the common strategies of remineralization and operative treatment. The aim of the present study was to compare the progression of sealed initial enamel lesions after exposure to a demineralizing solution in vitro. In each of 54 bovine enamel specimens three subsurface lesions were created. Two of the lesions were etched with phosphoric acid and sealed with either a fissure sealant or with various adhesives (1-5) for 15 s or 30 s, respectively, whereas one lesion remained as the untreated control. Subsequently, half of each specimen was covered with nail varnish (baseline) and the other half was reexposed to a demineralizing solution for 14 days (experimental). The specimens were cut perpendicularly to the surface, infiltrated with a low-viscosity fluorescent resin and observed with a confocal laser scanning microscope (CLSM). For lesions sealed with the fissure sealant and adhesives 1-3, the progression of lesion depth (0-31 microm) was significantly decreased (p<0.01; paired t test) compared with the untreated control (57 microm). For the fissure sealant and adhesives 1 and 3 extended penetration times (30 s) resulted in significantly reduced lesion progression compared to 15 s. It can be concluded that filling of the pores in initial enamel lesions with the fissure sealant and adhesives 1-3 can inhibit further demineralization in vitro.

Caries and fluorosis in 6- and 9-year-old children residing in three communities in Iran

OBJECTIVES

The aim of this study was to investigate the caries and fluorosis prevalence among 6- and 9-year-old students in three communities in Iran with varying urbanization and fluoride in piped water.

METHODS

Data were obtained from 523 dental examinations of 6- and 9-year olds in an upper middle class district in Teheran (T) (0.3 mg F/l), the city of Semnan (S) (1.3 mg F/l), and the village Dibaj (D) (0.2 mg F/l).

RESULTS

Children in the naturally fluoridated town showed slightly higher dmfs/dfs (SD) values for both 6-year olds [S: 9.1 (9.2), T: 7.2 (7.4), D: 7.1 (6.1)] and 9-year olds [S: 6.0 (6.2), T: 4.4 (4.2), D: 5.0 (4.7)], whereas the mean dmft/dft values as well as the numbers of caries-free children were comparable. A lower prevalence of dental restorations was reported for both Semnan and Dibaj compared with Teheran. A higher prevalence of fluorosis [Tooth Surface Index of Dental Fluorosis (TSIF) 3-7] was observed in the naturally fluoridated town compared with the low-fluoridated communities.

CONCLUSIONS

The ingestion of naturally fluoridated water (1.3 mg F/l) seemed to have a negligible effect on caries prevalence, but resulted in higher prevalence of dental fluorosis. It is emphasized that the study population was not adjusted for socioeconomic status, availability of dental care nor for exposures to other sources of fluoride. Nevertheless, it can be concluded that caries prevalence in Iran is quite low compared with that in other countries in the Middle East and that the elevated fluoride levels in the drinking water in Semnan may contribute to the development of mild to severe fluorosis.

Profilometric and Microradiographic Studies on the Effects of Toothpaste and Acidic Gel Abrasivity on Sound and Demineralized Bovine Dental Enamel

The objective of this study was to assess the abrasive effects of toothpastes and acidic F gels on sound and demineralized enamel. Pairs of enamel specimens were cut from bovine incisors, embedded in epoxy resin and polished. An artificial subsurface lesion of 80-90 microm depth was created in one specimen from each pair. The samples were covered with adhesive tape, thereby exposing the enamel for abrasivity testing. All samples were divided into six groups of 15 and brushed with a slurry (1:3) of F gel or toothpaste and human saliva. Brushing with water (control) or with slurry was carried out (16,000 strokes) using a medium toothbrush (load 275 g) mounted in a brushing machine. Abrasion was evaluated using laser profilometry, and was about 50% less on sound than on demineralized enamel (p < 0.001). In the latter, brushing with water (0.09 +/- 0.03 microm) or with fluoride-free gel (0.08 +/- 0.03 microm) resulted in negligible wear. With a medium-abrasive paste (1.76 +/- 0.85 microm) and an acidic F gel (2.48 +/- 0.72 microm), brushing abrasion was significantly greater (p < 0.001) than with a low-abrasive paste (0.84 +/- 0.38 microm). The greatest wear (16.6 +/- 10.8 microm) was observed with high-abrasive paste (p < 0.001), and here transversal microradiography revealed a complete loss of the pseudointact surface after brushing. In vitro formed caries-like lesions can be abraded (by toothbrushing) more easily than sound enamel; hence, initial white spot lesions should preferably be brushed with oral hygiene products of low abrasivity.

Microradiographic study on the effects of salivary proteins on in vitro demineralization of bovine enamel

The aim of this investigation was to evaluate the effects of various proteins on in vitro demineralization of bovine enamel. From each of 100 bovine incisors two samples were prepared. The specimens were embedded in epoxy resin and polished up to 4000 grit. Subsequently, the specimens' surfaces were partly covered with nail varnish, thus serving as control of sound enamel. The specimens were divided randomly into five groups (n = 40) and demineralized in a solution of constant composition (pH 5.0; 10 days). For each subgroup of specimens (n = 10) 4 L were taken and either low (50% of medium conc.), medium, or high (150%) concentrations of the proteins [human albumin (100% conc. = 7 mg L(-1)), mucin (577.5 mg L(-1)), immunoglobulin G (IgG) (46 mg L(-1)), casein isolated from bovine milk (1.2 g L(-1))] or amino acid [l-Proline (7 mg L(-1))] were added to 1 L of the demineralizing solution, whereas 1 L served as control. Mineral loss and lesion depth (LD) were evaluated from microradiographs of thin sections (110 mum) by a dedicated software package (TMR 1.24). No differences were found between the five control groups (P > 0.05; ANOVA). Albumin, l-Proline, and IgG did not affect enamel demineralization, whereas the addition of both casein and mucin resulted in significant reductions of both mineral loss and LDs (P < 0.01; Tukey's test). Within the limitations of an in vitro study, the present investigation indicates that casein and mucin seem to affect enamel demineralization significantly. Thus, these proteins might be helpful as an additive to saliva substitutes or mouthwashes if the quality of saliva is altered.

[The penetration of various adhesives into early enamel lesions in vitro]

The aim of the present study was to evaluate the penetration depth (PD) and the thickness of the oxygen inhibition layer (OIL) of a fissure sealant (Helioseal, Vivadent) and various adhesives (Heliobond, Excite, Vivadent; Resulcin, Merz; Solobond M, Voco; Prompt L-Pop, 3M-Espe) applied to enamel lesions in vitro. From 27 bovine teeth 54 enamel specimens were prepared and covered with nail varnish (control) thus obtaining three windows for treatment. After demineralisation (pH 5.0, 14 d) two of the windows were etched with phosphoric acid (20%, 5 s), whereas the third area served as control. The specimens were divided randomly into six groups (n = 9) and the respective adhesive was applied (90 s), either once or twice. Light-curing followed each application. Enamel slabs (perpendicular to the surface) were cut and studied after infiltration with a fluorescent low-viscous resin using confocal microscopy (CLSM). The image of the lesion was divided into two areas with different grey values. Lesion depths were calculated (ImageJ) from the surface to that point in the lesion where the grey value clearly changed to a darker grey value. The zone with the darker grey values marked the front of demineralisation. Mean lesion depths (+/- SD) after demineralisation were measured at 105 (+/- 21) microm. After single application, Resulcin [89 (+/- 22)%] and Helioseal [98 (+/- 6)%] had almost completely penetrated the lesion. Heliobond [126 (+/- 33)%] and Excite [184 (+/- 40)%] penetrated even deeper than the defined lesion. For Excite double application decreased the OIL significantly (p = 0.03; adjusted paired t-test). Adhesives are capable to penetrate artificial initial enamel lesions completely. Follow-up studies are needed to confirm this effect for natural lesions.

Filament end-rounding quality in electric toothbrushes

OBJECTIVES

A good quality of filament tips is desirable to protect both gingiva and dental hard tissues. The aim of the present study was to compare the end-rounding quality of the filaments in 15 electric toothbrushes (Rowenta dentaclip ZH-07, dentaclip ZH 010, rotaclip ZH-11; Blend-a-dent Wellenprofil 2000 hart, Wellenprofil 2000 mittel-weich, Medic for kids; Broxo; UltraSonex; Krups 548, Waterpik BH-4U; Butler Gum; Dr. Best e-Flex3; Oral-B (EB3, EB 17-8, Plak Control Kids)).

MATERIAL AND METHODS

From each brand five brushes were chosen randomly. Five tufts were selected from each brush and studied with a scanning electron microscope (x 45) at a viewing angle of 45 degrees. The filament tips were numbered from top left to bottom right and selected filaments were judged by a well-trained, blinded second examiner according to the Silverstone & Featherstone method.

RESULTS

Nine of the 15 brands examined showed a high ("acceptable": >89%), four products a medium (76-84%) and two a bad (34-38%) end-rounding quality.

CONCLUSION

A good quality of filament tips is claimed by the dental profession to protect both gingiva and dental hard tissues from abrasion. This could be observed for 13 of the 15 brands examined.

Effect of Mucin Alone and in Combination with Various Dentifrices on in vitro Remineralization

The aim of this in vitro study was to evaluate the effect of combining various fluoridated dentifrices with mucin on remineralization of bovine enamel. Enamel specimens were embedded in epoxy resin, partly covered with nail varnish, and demineralized in a lactic acid solution (pH 5.0, 14 days). Parts of the demineralized areas of the specimens were then covered with nail varnish. Half of the samples were exposed to a mucin-containing (2.7 g/l) remineralizing solution, the other half to a mucin-free remineralizing solution for 30 days. In each group, the specimens were divided into four subgroups, which were brushed twice a day with a toothpaste containing sodium, stannous/amine, or amine fluoride. The specimens of the fourth subgroup were not brushed, but stored in one of the two solutions. Mineral loss and lesion depth were evaluated from microradiographs. After the remineralization period, specimens that were brushed with one of the dentifrices and stored in the mucin-containing remineralizing solution reacquired more mineral than those brushed and stored in the mucin-free solution (p < 0.05; Bonferroni post hoc test). The results indicate that mucin in combination with various fluorides seems to affect enamel remineralization significantly. Thus, mucin could be considered as an additive to saliva substitutes or mouthwashes in patients with hyposalivation.

Bristle end-rounding in toothbrushes: a comparison of different evaluation techniques, bristle position and viewing angle

OBJECTIVE

Numerous studies using various evaluation techniques have shown substantial variations in the degree of bristle end-roundness of commercially available toothbrushes. The aim of the present study was to compare the effects of the examination angle, the bristle selection and two analyzing techniques assessing bristle end-rounding measurements.

METHODOLOGY

The study was conducted in two parts. Part One used five randomly selected tufts from 20 brushes that were scanned with an electron micrograph (SEM; 45x) at two viewing angles (45 degrees and 90 degrees). Those bristle tips that were visible on both viewing angles were then judged by 1) a direct comparison to a grading scale, and 2) a shape factor (SF) analysis. In Part Two of the study, SEM images of five bristles from different tufts obtained from 40 brushes were taken at a viewing angle of 45 degrees, and five bristles from different locations within a tuft were also judged by both the direct comparison to a grading scale method, and the SF analysis, to assess bristle location.

RESULTS

The SF values and the direct comparison percentage of rounded bristles did not differ because of the viewing angle (45 degrees or 90 degrees; p > 0.05; Mann-Whitney test), but differed significantly at various SF thresholds (percentage of bristles above or below a certain degree of end-roundness) when bristles from Part One were compared to Part Two (p < 0.01, adjusted chi-square-test). Location of the bristles from either the edge of a tuft or those located in the inner part had no effect on the assessments (p > 0.05). The results from the subjective direct comparison grading did not differ from those found with the SF analysis (p > 0.05).

CONCLUSION

SF analysis is a time-consuming method for assessing bristle end-rounding, and can be as accurately done by direct comparison to a grading scale. One viewing angle (45 degrees) of bristles from different locations within a tuft can also be used to accurately assess a brush's level of end-roundness.

Initial in situ secondary caries formation: effect of various fluoride-containing restorative materials

This study evaluated the effects of various restorative materials (Ariston pHc; Dyract; Vitremer; Tetric Ceram; Compoglass F, F2000; Hytac and Ketac Molar) on initial secondary caries formation in situ. Eighty-eight enamel slabs from sound human molars were sterilized (ethylene dioxide) and embedded in epoxy resin. Standardized tooth preparations were filled with the various restorative materials according to manufacturers' recommendations. One specimen from each group was inserted into one of two buccal aspects of an intraoral appliance worn by 11 volunteers for four weeks, day and night. Oral hygiene was performed without additional fluoride application. During meals and oral hygiene procedures, the appliances were stored in sucrose solution (10%). After in situ exposure, the samples were prepared for microradiographic assessment. Mineral content and lesion depth were evaluated by a dedicated software package (TMR 1.24). Lesion depth and mineral loss of the carious lesions close to Ariston pHc was significantly lower when compared to distant parts of the same lesions (p < 0.05; t-test, Bonferroni-Holm correction). All other materials containing fluoride showed no caries protective effect on surrounding enamel (p > 0.05; t-test, Bonferroni-Holm correction). A hydroxyl-, calcium- and fluoride-containing restorative material hampers demineralization next to the restoration, whereas, fluoride release of various fluoride-containing restorative materials does not affect demineralization of adjacent enamel in situ.

The effect of commercially available saliva substitutes on predemineralized bovine dentin in vitro

OBJECTIVE

The objective of this study was to evaluate the effects of various saliva substitutes (Artisial; Glandosane; Oralube; Saliva medac; Oralbalance) on the lesion depth and the mineral content of predemineralized bovine dentin in vitro.

MATERIALS AND METHODS

Ninety-six dentin samples were prepared from 24 freshly extracted bovine incisors. The samples were predemineralized (pH 5.5; 10 days), and subsequently exposed to the various artificial salivas. A carbonate-reduced mineral water (Hirschquelle) as well as the mouthwash solutions Meridol and biotène served as controls. Lesion depth and mineral loss were evaluated from microradiographs of thin sections (110 microm) by a dedicated software package (TMR 1.24).

RESULTS

After storage in Glandosane and biotène, the results indicated a significant mineral loss and an increase in lesion depth (P < 0.01; Wilcoxon). In contrast, specimens stored in Oralube showed a decrease in lesion depth and an increase in mineral content (P < 0.05; Wilcoxon).

CONCLUSIONS

Thus, the use of neither Glandosane nor biotène can be recommended in dentate patients with severe xerostomia.

Caries prevalence among 6- to 16-year-old students in Jamaica 12 years after the Introduction of salt fluoridation

The aim of this descriptive cross-sectional study was to evaluate the caries prevalence among 6- to 16-year-old students in a rural community in Jamaica, where salt fluoridation was introduced in 1987. Data were obtained from dental examinations of 1,558 students in 1999. The mean (SD) dmfs/DMFS values were 7.9 (10.7) for the 6-year-old children, 4.1 (4.9) for the 12-year-old students and 8.2 (8.1) for the 15-year-olds; mean (SD) dmft/DMFT scores were 3.2 (3.5), 2.2 (2.1) and 3.8. (3.3), respectively. An Unmet Restorative Index of 88-99.9% was observed. Opacities due to fluorosis were recorded for 48% of the children examined. The results indicate a reduced caries prevalence for all age groups since salt fluoridation began. However, since various forms of fluoride might have contributed to the reduction, conclusions concerning salt fluoridation as the main factor must be drawn with caution. The effectiveness of salt fluoridation in Jamaica should be re-examined more closely.

[Effects of saliva substitutes and mouthwash solutions on dentin]

Saliva substitutes are used by patients suffering from hyposalivation to alleviate the symptoms of severe xerostomia. Therefore, the objective of this study was to evaluate the effects of various saliva substitutes (Artisial; Glandosane; Oralube; Saliva medac; Oralbalance) on the lesion depth and the mineral content in sound bovine dentin in vitro. 96 dentine specimens were prepared from 24 freshly extracted bovine incisors and exposed for seven days to the various solutions. A carbonate-reduced mineral water (Hirschquelle) as well as the mouthwash solutions Meridol and biotène served as controls. After storage in the solutions, the specimens were cut perpendicularly to their surfaces, polished up to 4000 grit and mounted on plexiglass microscope slides. The slabs were ground to a uniform thickness of 110 mu m. Lesion depths and mineral content were evaluated from microradiographs of the prepared specimens by a dedicated software (TMR 1.24) After storage in Glandosane and biotène results indicated a significant mineral loss and increase in lesion depth (p<0.01; Kruskal-Wallis). All other solutions used did not have any effect on the integrity of the dentin samples. Thus, the use of both Glandosane as well as biotène cannot be recommended in dentate patients with severe xerostomia.