Effects of micronized and nano-copper azole on marine benthic communities

The widespread use of copper nanomaterials (CuNMs) as antibacterial and antifouling agents in consumer products increases the risk for metal contamination and adverse effects in aquatic environments. Information gaps exist on the potential toxicity of CuNMs in marine environments. We exposed field-collected marine meio- and macrobenthic communities to sediments spiked with micronized copper azole (MCA) using a novel method that brings intact benthic cores into the laboratory and exposes the organisms via surface application of sediments. Treatments included field and laboratory controls, 3 spiked sediments: low-MCA (51.9 mg/kg sediment), high-MCA (519 mg/kg sediment), and CuSO₄ (519 mg/kg sediment). In addition, single-species acute testing was performed with both MCA and CuSO_4. Our results indicate that meio- and macrofaunal assemblages exposed to High-MCA and CuSO₄ treatments differed significantly from both the laboratory control and the low-MCA treatments. Differences in macrofauna were driven by decreases in 3 Podocopa ostracod species, the bivalve Gemma gemma, and the polychaetes Exogone verugera and Prionospio heterobranchia relative to the laboratory control. Differences in the meiofaunal community are largely driven by nematodes. The benthic community test results were more sensitive than the single-species test results. Findings of this investigation indicate that CuNMs represent a source of risk to marine benthic communities comparable to that of dissolved Cu. Environ Toxicol Chem 2018;37:362-375. Published 2017 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.

Particle-bound metal transport after removal of a small dam in the Pawtuxet River, Rhode Island, USA

The Pawtuxet River in Rhode Island, USA, has a long history of industrial activity and pollutant discharges. Metal contamination of the river sediments is well documented and historically exceeded toxicity thresholds for a variety of organisms. The Pawtuxet River dam, a low-head dam at the mouth of the river, was removed in August 2011. The removal of the dam was part of an effort to restore the riverine ecosystem after centuries of anthropogenic impact. Sediment traps were deployed below the dam to assess changes in metal concentrations and fluxes (Ag, Cd, Cr, Cu, Ni, Pb, and Zn) from the river system into Pawtuxet Cove. Sediment traps were deployed for an average duration of 24 days each, and deployments continued for 15 months after the dam was removed. Metal concentrations in the trapped suspended particulate matter dropped after dam removal (e.g., 460 to 276 mg/kg for Zn) and remained below preremoval levels for most of the study. However, particle-bound metal fluxes increased immediately after dam removal (e.g., 1206 to 4248 g/day for Zn). Changes in flux rates during the study period indicated that river volumetric flow rates acted as the primary mechanism controlling the flux of metals into Pawtuxet Cove and ultimately upper Narragansett Bay. Even though suspended particulate matter metal concentrations initially dropped after removal of the dam, no discernable effect on the concentration or flux of the study metals exiting the river could be associated with removal of the Pawtuxet River dam. Integr Environ Assess Manag 2017;13:675-685. Published 2016. This article is a US Government work and is in the public domain in the USA.

Aggregation, Sedimentation, Dissolution, and Bioavailability of Quantum Dots in Estuarine Systems

To understand their fate and transport in estuarine systems, the aggregation, sedimentation, and dissolution of CdSe quantum dots (QDs) in seawater were investigated. Hydrodynamic size increased from 40 to 60 nm to >1 mm within 1 h in seawater, and the aggregates were highly polydispersed. Their sedimentation rates in seawater were measured to be 4-10 mm/day. Humic acid (HA), further increased their size and polydispersity, and slowed sedimentation. Light increased their dissolution and release of dissolved Cd. The ZnS shell also slowed release of Cd ions. With sufficient light, HA increased the dissolution of QDs, while with low light, HA alone did not change their dissolution. The benthic zone in estuarine systems is the most probable long-term destination of QDs due to aggregation and sedimentation. The bioavailability of was evaluated using the mysid Americamysis bahia. The 7-day LC50s of particulate and dissolved QDs were 290 and 23 μg (total Cd)/L, respectively. For mysids, the acute toxicity appears to be from Cd ions; however, research on the effects of QDs should be conducted with other organisms where QDs may be lodged in critical tissues such as gills or filtering apparatus and Cd ions may be released and delivered directly to those tissues.

Relationship between adherence to study and clinic visits in systemic lupus erythematosus patients: data from the LUMINA cohort

The aim of this study was to examine the relationship between nonadherence with study visits and with regularly scheduled clinic visits after adjusting for other patient and disease characteristics. One hundred and forty-one LUMINA patients with appointment data in the institutions’ computerized systems (UAB and UTH) were studied. ‘No shows’ were assessed as the percentage of appointments not attended for either rheumatology, other clinics and LUMINA visits (from zero to 100%). Eighty-nine percent of the patients were women, 40% were Caucasians, 55% African-Americans and 5% Hispanics. ‘No shows’ to rheumatology were associated with non-Caucasian ethnicity, younger age, single marital status, lack of home ownership, ‘no shows’ to other clinics and to the LUMINA study, greater disease activity and to some disease manifestations (serositis, renal involvement, positive anti-dsDNA antibodies). In multivariable analyses, features predictive of rheumatology ‘no shows’ were lack of home ownership, ‘no shows’ to LUMINA study visits, renal involvement and serosal manifestations. Nonadherence with study visits and with regularly scheduled care at rheumatology clinics were associated. Other factors predictive of nonadherence to recommended care were lack of home ownership (a measurement of low socioeconomic status) and the presence of disease manifestations (i.e., renal or serosal involvement). These data should be considered when caring for patients with SLE.

Environmental biodegradability of [¹⁴C] single-walled carbon nanotubes by Trametes versicolor and natural microbial cultures found in New Bedford Harbor sediment and aerated wastewater treatment plant sludge

Little is known about environmental biodegradability or biotransformations of single-walled carbon nanotubes (SWNT). Because of their strong association with aquatic organic matter, detailed knowledge of the ultimate fate and persistence of SWNT requires investigation of possible biotransformations (i.e., biodegradation) in environmental media. In the present study, [(14)C]SWNT were utilized to track biodegradation over 6 mo by pure liquid culture of the fungus Trametes versicolor and mixed bacterial isolates from field-collected sediment or aerated wastewater treatment plant sludge. The mixed cultures were chosen as more environmentally relevant media where SWNT will likely be deposited under both aerobic and anaerobic conditions. Activity of [(14)C] was assessed in solid, aqueous, and (14)CO2 gaseous phases to determine amounts of intact SWNT, partially soluble SWNT degradation products, and mineralized SWNT, respectively, during the 6 mo of the experiment. Mass balances based on radiocarbon activity were approximately 100% over 6 mo, and no significant degradation of SWNT was observed. Approximately 99% of the [(14)C] activity remained in the solid phase, 0.8% in the aqueous phase, and less than 0.1% was mineralized to (14)CO2, regardless of culture type. These results suggest that SWNT are not readily biodegraded by pure fungal cultures or environmental microbial communities, and are likely persistent in environmental media.

Toxicity, bioaccumulation, and biotransformation of silver nanoparticles in marine organisms

The toxicity, bioaccumulation, and biotransformation of citrate and polyvinylpyrrolidone (PVP) coated silver nanoparticles (NPs) (AgNP-citrate and AgNP-PVP) in marine organisms via marine sediment exposure was investigated. Results from 7-d sediment toxicity tests indicate that AgNP-citrate and AgNP-PVP did not exhibit toxicity to the amphipod (Ampelisca abdita) and mysid (Americamysis bahia) at ≤75 mg/kg dry wt. A 28-d bioaccumulation study showed that Ag was significantly accumulated in the marine polychaete Nereis virens (N. virens) in the AgNP-citrate, AgNP-PVP and a conventional salt (AgNO3) treatments. Synchrotron X-ray absorption spectroscopy (XAS) results showed the distribution of Ag species in marine sediments amended with AgNP-citrate, AgNP-PVP, and AgNO3 was AgCl (50–65%) > Ag2S (32–42%) > Ag metal (Ag0) (3–11%). In N virens, AgCl (25–59%) and Ag2S (10–31%) generally decreased and, Ag metal (32–44%) increased, relative to the sediments. The patterns of speciation in the worm were different depending upon the coating of the AgNP and both types of AgNPs were different than the AgNO3 salt. These results show that the AgNP surface capping agents influenced Ag uptake, biotransformation, and/or excretion. To our knowledge, this is the first demonstration of the bioaccumulation and speciation of AgNPs in a marine organism (N. virens).

Stability and aggregation of silver and titanium dioxide nanoparticles in seawater: role of salinity and dissolved organic carbon

The behavior and fate of nanoparticles (NPs) in the marine environment are largely unknown and potentially have important environmental and human health implications. The aggregation and fate of NPs in the marine environment are greatly influenced by their interactions with seawater and dissolved organic carbon (DOC). In the present study, the stability and aggregation of 30-nm-diameter silver nanoparticles (AgNPs) capped with citrate and polyvinylpyrrolidone (PVP; AgNP-citrate and AgNP-PVP) and 21-nm-diameter titanium dioxide (TiO(2)) NPs as affected by seawater salinity and DOC were investigated by measuring hydrodynamic diameters and zeta potentials. The added DOC (in humic acid form) stabilized the 3 types of NPs when the seawater salinities were ≤5 parts per thousand (ppt), but the stabilizing effect of DOC was reduced by a higher salinity (e.g., 30 ppt). In addition, AgNP-PVP was more stable than AgNP-citrate in seawater, indicating that surface capping agents and stabilization mechanisms govern the stability and aggregation of NPs. Statistical analysis showed that salinity is the most dominant influence on the stability and aggregation of AgNPs and TiO(2) NPs, followed by DOC. These findings expand our knowledge on the behavior of AgNPs and TiO2 NPs in seawater and indicate that the fate of these NPs will be primarily to aggregate in the water column, precipitate, and accumulate in sediments following release into the marine environment.

A molecular-based approach for examining responses of eukaryotes in microcosms to contaminant-spiked estuarine sediments

Ecotoxicological information for most contaminants is limited to a small number of taxa, and these are generally restricted to comparatively hardy organisms that are readily extractable from test media and easily identifiable. Advances in DNA sequencing can now provide a comprehensive view of benthic invertebrate diversity. The authors applied 454 pyrosequencing to examine the responses of benthic communities in microcosms exposed to sediments with elevated concentrations of triclosan, the endpoint being eukaryl communities that have successfully vertically migrated through the manipulated sediments. The biological communities associated with the 3 treatments (control triclosan, low triclosan [14 mg/kg], and high triclosan [180 mg/kg]) clustered into 3 groups: control/low (n = 6 controls and 4 low), moderate (n = 2 low), and high (n = 5 high). One sample was discarded as an outlier. The most pronounced change as a response to triclosan was the loss of number of metazoan operational taxonomic units (OTUs), indicative of the control/low and moderate groups, with this being most evident in the range of taxa associated with the classes Chromadorea and Bivalvia and the phylum Kinorhyncha. The authors also describe a range of other taxa that aided discrimination between the groups; compare findings with traditionally obtained meio- and macrofaunal communities obtained from the same experiment; and illustrate some of the advantages and limitations associated with both the molecular and traditional approaches. The described approach illustrates the capacity for amplicon sequencing to provide ecologically relevant information that can be used to strengthen an understanding of how sedimentary communities respond to a range of environmental stressors.

What's causing toxicity in sediments? Results of 20 years of toxicity identification and evaluations

Sediment toxicity identification and evaluation (TIE) methods have been used for 20 yr to identify the causes of toxicity in sediments around the world. In the present study, the authors summarize and categorize results of 36 peer-reviewed TIE studies (67 sediments) into nonionic organic, cationic, ammonia, and "other" toxicant groups. Results are then further categorized according to whether the study was performed in freshwater or marine sediments and whether the study was performed using whole-sediment or interstitial-water TIE methods. When all studies were grouped, nonionic organic toxicants, either singly or in combination with other toxicants, were implicated in 70% of all studies. When studies were divided into interstitial-water TIE methodology compared with whole-sediment TIE methodology, results indicated that studies performed using interstitial-water TIE methods reported nonionic organic toxicity slightly more often than toxicity from cationic metals (67% compared with 49%). In contrast, studies using whole-sediment TIE methods report nonionic organic chemical toxicity, either singly or in combination with another toxicant, in 90% of all sediments tested. Cationic metals play a much smaller role in whole-sediment TIE studies-fewer than 20% of all sediments had a metals signal. The discrepancy between the 2 methods can be attributed to exposure differences. Contrary to earlier findings, ammonia generally plays only a minor role in sediment toxicity.

Effects-directed analysis (EDA) and toxicity identification evaluation (TIE): Complementary but different approaches for diagnosing causes of environmental toxicity

Currently, 2 approaches are available for performing environmental diagnostics on samples like municipal and industrial effluents, interstitial waters, and whole sediments to identify anthropogenic contaminants causing toxicological effects. One approach is toxicity identification evaluation (TIE), which was developed primarily in North America to determine active toxicants to whole-organism endpoints. The second approach is effects-directed analysis (EDA), which has origins in both Europe and North America. Unlike TIE, EDA uses primarily in vitro endpoints with an emphasis on organic contaminants as the cause of observed toxicity. The 2 approaches have fundamental differences that make them distinct techniques. In EDA, the sophisticated and elegant fractionation and chemical analyses performed to identify the causes of toxicity with a high degree of specificity often compromise contaminant bioavailability. In contrast, in TIE, toxicant bioavailability is maintained and is considered critical to accurately identifying the causes of environmental toxicity. However, maintaining contaminant bioavailability comes with the cost of limiting, at least until recently, the use of the types of sophisticated fractionation and elegant chemical analyses that have resulted in the high specificity of toxicant diagnosis performed in EDA. The present study provides an overview of each approach and highlights areas where the 2 approaches can complement one another and lead to the improvement of both.

Bioaccumulation and toxicity of single-walled carbon nanotubes to benthic organisms at the base of the marine food chain

As the use of single-walled carbon nanotubes (SWNTs) increases over time, so does the potential for environmental release. This research aimed to determine the toxicity, bioavailability, and bioaccumulation of SWNTs in marine benthic organisms at the base of the food chain. The toxicity of SWNTs was tested in a whole sediment exposure with the amphipod Ampelisca abdita and the mysid Americamysis bahia. In addition, SWNTs were amended to sediment and/or food matrices to determine their bioavailability and bioaccumulation through these routes in A. abdita, A. bahia, and the estuarine amphipod Leptocheirus plumulosus. No significant mortality to any species via sediment or food matrices was observed at concentrations up to 100 ppm. A novel near-infrared fluorescence spectroscopic method was utilized to measure and characterize the body burdens of pristine SWNTs in nondepurated and depurated organisms. We did not detect SWNTs in depurated organisms but quantified them in nondepurated A. abdita fed SWNT-amended algae. After a 28-d exposure to [(14) C]SWNT-amended sediment (100 µg/g) and algae (100 µg/g), [(14) C]SWNT was detected in depurated and nondepurated L. plumulosus amphipods at 0.50 µg/g and 5.38 µg/g, respectively. The results indicate that SWNTs are bioaccessible to marine benthic organisms but do not appear to accumulate or cause toxicity.

Linkage of genomic biomarkers to whole organism end points in a Toxicity Identification Evaluation (TIE)

Aquatic organisms are exposed to many toxic chemicals and interpreting the cause and effect relationships between occurrence and impairment is difficult. Toxicity Identification Evaluation (TIE) provides a systematic approach for identifying responsible toxicants. TIE relies on relatively uninformative and potentially insensitive toxicological end points. Gene expression analysis may provide needed sensitivity and specificity aiding in the identification of primary toxicants. The current work aims to determine the added benefit of integrating gene expression end points into the TIE process. A cDNA library and a custom microarray were constructed for the marine amphipod Ampelisca abdita. Phase 1 TIEs were conducted using 10% and 40% dilutions of acutely toxic sediment. Gene expression was monitored in survivors and controls. An expression-based classifier was developed and evaluated against control organisms, organisms exposed to low or medium toxicity diluted sediment, and chemically selective manipulations of highly toxic sediment. The expression-based classifier correctly identified organisms exposed to toxic sediment even when little mortality was observed, suggesting enhanced sensitivity of the TIE process. The ability of the expression-based end point to correctly identify toxic sediment was lost concomitantly with acute toxicity when organic contaminants were removed. Taken together, this suggests that gene expression enhances the performance of the TIE process.

Use of a novel sediment exposure to determine the effects of triclosan on estuarine benthic communities

Triclosan (5-chloro-2-[2,4-dichlorophenoxy]phenol) is a relatively new, commonly used antimicrobial compound found in many personal care products. Triclosan is toxic to marine organisms at the micrograms per liter level, can photodegrade to a dioxin, can accumulate in humans, and has been found to be stable in marine sediments for over 30 years. To determine the effects of triclosan on marine benthic communities, intact sediment cores were brought into the laboratory and held under flowing seawater conditions. A 2-cm layer of triclosan-spiked sediment was applied to the surface, and after a two-week exposure the meio- and macrofaunal communities were assessed for differences in composition relative to nonspiked cores. A high triclosan treatment (180 mg/kg dry wt) affected both the meio- and the macrobenthic communities. There were no discernible differences with a low-triclosan treatment (14 mg/kg dry wt). This exposure method is effective for testing the benthic community response to sediment contaminants, but improvements should be made with regard to the amount and method of applying the overlying sediment to prevent smothering of fragile benthic organisms.

Diagnosis of potential stressors adversely affecting benthic communities in New Bedford Harbor, MA (USA)

Diagnosing the causes of impaired ecosystems in the marine environment is critical for effective management action. When ecological impairment is based on toxicological or biological criteria (i.e., degraded benthic community composition or toxicity test results), managers are faced with the additional problem of diagnosing the cause of impairment before plans can be initiated to reduce the pollutant loading. We evaluated a number of diagnostic tools to determine their ability to identify pollutants in New Bedford Harbor (NBH), Massachusetts (USA), using a modified version of the US Environmental Protection Agency's (USEPA) stressor identification (SI) guidance. In this study, we linked chemical sources and toxic chemicals in the sediment with spatial concentration studies; we also linked toxic chemicals in the sediment with toxicity test results using toxicity identification and evaluation (TIE) studies. We used geographical information systems (GIS) maps to determine sources and to aid in determining spatially integrated inorganic nitrogen (SIIN). The SIIN values of reference and test estuaries were quantified and compared. Using this approach, we determined that toxic chemicals continue to be active stressors in NBH and that a moderate nutrient stress exists, but we were unable to link the nutrient stressor with a source. Also excess sedimentation was evaluated, but it does not appear to be an active stressor in this harbor. The research included an evaluation of the effectiveness of tools under development that may be used to evaluate stressors in water bodies. We found that the following tools were useful in diagnosing active stressors: toxicity tests, toxicity identification and evaluation (TIE) methods, comparison of grain size-normalized total organic carbon (TOC) ratios with reference sites, and comparison of SIIN with reference sites. This approach allowed us to successfully evaluate stressors in NBH retrospectively; however, a limitation in using retrospective data sets is that the approach may underestimate current or newly emerging stressors.

Effects of triclosan on marine benthic and epibenthic organisms

Triclosan is an antimicrobial compound that has been widely used in consumer products such as toothpaste, deodorant, and shampoo. Because of its widespread use, triclosan has been detected in various environmental media, including wastewater, sewage sludge, surface waters, and sediments. Triclosan is acutely toxic to numerous aquatic organisms, but very few studies have been performed on estuarine and marine benthic organisms. For whole sediment toxicity tests, the sediment-dwelling estuarine amphipod, Ampelisca abdita, and the epibenthic mysid shrimp, Americamysis bahia, are commonly used organisms. In the present study, median lethal concentration values (LC50) were obtained for both of these organisms using water-only and whole sediment exposures. Acute 96-h water-only toxicity tests resulted in LC50 values of 73.4 and 74.3 µg/L for the amphipod and mysid, respectively. For the 7-d whole sediment toxicity test, LC50 values were 303 and 257 mg/kg (dry wt) for the amphipod and mysid, respectively. Using equilibrium partitioning theory, these whole sediment values are equivalent to interstitial water LC50 values of 230 and 190 µg/L for the amphipod and mysid, respectively, which are within a threefold difference of the observed 96-h LC50 water-only values. Triclosan was found to accumulate in polychaete tissue in a 28-d bioaccumulation study with a biota-sediment accumulation factor of 0.23 kg organic carbon/kg lipid. These data provide some of the first toxicity data for triclosan with marine benthic and epibenthic species while also indicating a need to better understand the effects of other forms of sediment carbon, triclosan ionization, and organism metabolism of triclosan on the chemical's behavior and toxicity in the aquatic environment.

Distribution, magnitude and characterization of the toxicity of Ukrainian estuarine sediments

During the Soviet era, Ukraine was an important industrial and agricultural region of the Soviet Union. This industrial and agricultural activity resulted in contamination of Ukraine's estuaries with legacy anthropogenic pollutants. Investigations on the toxicological effects of this estuarine contamination have been limited. For this research, we measured the toxicity of contaminated sediments from four Ukrainian estuaries to several aquatic organisms over 3 years. Sediment chemical analyses and whole sediment toxicity identification evaluations (TIEs) were also performed to determine the classes of contaminants contributing to toxicity. Toxic sediments were observed in several of the Ukrainian estuaries and chemical analyses of the sediments demonstrated anthropogenic contaminants were widely distributed. Contaminants were also detected in macrobenthic organisms collected from the sediments. Several lines of evidence, including TIEs, indicated hydrophobic organic chemicals (HOCs) were contributing substantially to observed toxicity. This information can guide environmental managers to prioritize portions of the estuaries requiring remediation.

Assessment of supercritical fluid extraction use in whole sediment toxicity identification evaluations

Supercritical fluid extraction (SFE) with pure CO(2) was assessed as a confirmatory tool in phase III of whole sediment toxicity identification evaluations (TIEs). The SFE procedure was assessed on two reference sediments and three contaminated sediments by using a combination of toxicological and chemical measurements to quantify effectiveness. Sediment toxicity pre- and post-SFE treatment was quantified with a marine amphipod (Ampelisca abdita) and mysid (Americamysis bahia), and nonionic organic contaminants (NOCs) polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were measured in sediments, overlying waters, and interstitial waters. In general, use of SFE with the reference sediments was successful, with survival averaging 91% in post-SFE treatments. Substantial toxicity reductions and contaminant removal from sediments and water samples generated from extracted sediments of up to 99% in two of the contaminated sediments demonstrated SFE effectiveness. Furthermore, toxicological responses for these SFE-treated sediments showed comparable results to those from the same sediments treated with the powdered coconut charcoal addition manipulation. These data demonstrated the utility of SFE in phase III of a whole sediment TIE. Conversely, in one of the contaminated sediments, the SFE treatments had no effect on sediment toxicity, whereas sediment concentrations of PCBs and PAHs were reduced. We propose that, for some sediments, the SFE treatment may result in the release of otherwise nonbioavailable cationic metals that subsequently cause toxicity to test organisms. Overall, SFE treatment was found to be effective for reducing the toxicity and concentrations of NOCs in some contaminated sediments. However, these studies suggest that SFE treatment may enhance toxicity with some sediments, indicating that care must be taken when applying SFE and interpreting the results.

Limitations of reverse polyethylene samplers (RePES) for evaluating toxicity of field contaminated sediments

Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In the present study, RePES were used with field contaminated sediments. The RePES was not capable of recreating the pattern of toxicity with the amphipod and mysid observed with intact field sediments. Decreased survival in the RePES exposures as compared to the whole sediment exposures was most likely caused by an overexposure to NOCs due to a lack of surrogate black carbon in the RePES system. As an alternative, aqueous phase studies were performed in which polyethylene was allowed to equilibrate with slurries of intact sediments for 3 weeks. Three weeks was found to be an insufficient amount of time for the polyethylene to equilibrate with the sediment. An additional study demonstrated 3 months was sufficient for lower contaminant concentrations, but might not be an adequate amount of time for more highly contaminated sediments. The aqueous phase transfer approach may be useful if equilibration is sufficiently long, although this length of time may be impractical for use in certain applications, such as toxicity identification evaluations (TIEs).

Can sediment total organic carbon and grain size be used to diagnose organic enrichment in estuaries?

Eutrophication (i.e., nutrient enrichment, organic enrichment, and oxygen depletion) is one of the most common sources of impairment in Clean Water Act 303(d)-listed waters in the United States. Although eutrophication can eventually cause adverse effects to the benthos, it may be difficult to diagnose. Sediment organic carbon (OC) content has been used as an indicator of enrichment in sediments, but the amount of surface area available for carbon adsorption must be considered. We investigated the utility of the relationship between OC and sediment grain size as an indicator of eutrophication. Data from the U.S. Environmental Protection Agency's Environmental Monitoring and Assessment Program was used to test this relationship. However, anthropogenic contaminants are also capable of causing adverse effects to the benthos and often co-occur with elevated levels of OC. Contaminant analysis and toxicity tests were not consistently related to enrichment status as defined by relationship between total OC and grain size. Although variability in response occurred, reflecting the variance in the water column factors (dissolved oxygen, chlorophyll a, and nutrients) and limited sample sizes, the data supported the hypothesis that sites designated as enriched were eutrophied. Dissolved oxygen levels were reduced at enriched sites, whereas chlorophyll a and nutrients were higher at enriched sites. This suggests that the relationship of OC to grain size can be used as a screening tool to diagnose eutrophication.

Bioavailability assessment of a contaminated field sediment from Patrick Bayou, Texas, USA: toxicity identification evaluation and equilibrium partitioning

Contaminated sediments are commonly found in urbanized harbors. At sufficiently high contaminant levels, sediments can cause toxicity to aquatic organisms and impair benthic communities. As a result, remediation is necessary and diagnosing the cause of sediment toxicity becomes imperative. In the present study, six sediments from a highly industrialized area in Patrick Bayou (TX, USA) were subjected to initial toxicity testing with the mysid, Americamysis bahia, and the amphipod, Ampelisca abdita. All sediments were toxic to the amphipods, while sites PB4A, PB6A, and PB9 were the only sites toxic to mysids. Due to its toxicity to both test organisms, site PB6A was chosen for a marine whole sediment phase I toxicity identification evaluation (TIE). Results of the TIE found toxicity to amphipods was primarily due to nonionic organic contaminants (NOCs), rather than cationic metals or ammonia. Causes of mysid toxicity in the TIE were less clear. An assessment of metal bioavailability using equilibrium partitioning (EqP) approaches supported the results of the TIE that cationic metals were not responsible for observed toxicity in PB6A for either organism. Toxic units (TU) calculated on measured concentrations of NOCs in the sediment yielded a total TU of 1.25, indicating these contaminants are contributing to the observed sediment toxicity. Using a combination of these TIE and EqP assessment tools, this investigation was capable of identifying NOCs as the likely class of contaminants causing acute toxicity to amphipods exposed to Patrick Bayou sediment. The cause of mysid toxicity was not definitively determined, but unmeasured NOCs are suspected.

Do toxicity identification and evaluation laboratory-based methods reflect causes of field impairment?

Sediment toxicity identification and evaluation (TIE) methods are relatively simple laboratory methods designed to identify specific toxicants or classes of toxicants in sediments; however, the question of whether the same toxicant identified in the laboratory is causing effects in the field remains unanswered. The objective of our study was to determine if laboratory TIE methods accurately reflect field effects. A TIE performed on sediments collected from the Elizabeth River (ER) in Virginia identified polycyclic aromatic hydrocarbons (PAHs) as the major toxicants. Several lines of evidence indicated PAHs were the major toxic agents in the field, including elevated PAH concentrations in ER sediments, comet assay results from in situ caged Merceneria merceneria, and chemical analyses of exposed M. merceneria, which indicated high PAH concentrations in the bivalve tissue. Our final evidence was the response from test organisms exposed to ER sediment extracts and then ultraviolet (UV) radiation. UV radiation caused a toxic diagnostic response unique to PAHs. The aggregation of these various lines of evidence supports the conclusion that PAHs were the likely cause of effects in laboratory- and field-exposed organisms, and that laboratory-based TIE findings reflect causes of field impairment