A two-step continuous ultrasound assisted production of biodiesel fuel from waste cooking oils: a practical and economical approach to produce high quality biodiesel fuel

A transesterification reaction of waste cooking oils (WCO) with methanol in the presence of a potassium hydroxide catalyst was performed in a continuous ultrasonic reactor of low-frequency 20 kHz with input capacity of 1 kW, in a two-step process. For the first step, the transesterification was carried out with the molar ratio of methanol to WCO of 2.5:1, and the amount of catalyst 0.7 wt.%. The yield of fatty acid methyl esters (FAME) was about 81%. A yield of FAME of around 99% was attained in the second step with the molar ratio of methanol to initial WCO of 1.5:1, and the amount of catalyst 0.3 wt.%. The FAME yield was extremely high even at the short residence time of the reactants in the ultrasonic reactor (less than 1 min for the two steps) at ambient temperature, and the total amount of time required to produce biodiesel was 15h. The quality of the final biodiesel product meets the standards JIS K2390 and EN 14214 for biodiesel fuel.

Characteristics of the abundance of polychlorinated dibenzo-p-dioxin and dibenzofurans, and dioxin-like polychlorinated biphenyls in sediment samples from selected Asian regions in Can Gio, Southern Vietnam and Osaka, Japan

The levels of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs) were determined in sediment samples from Can Gio, South Vietnam, and Osaka, Japan. Can Gio is known for the defoliation of its mangrove forests by aerial spraying with Agent Orange during the Vietnam War, whereas Osaka is renowned for a PCDD/PCDF pollution accident at a municipal solid-waste incinerator. For comparison, we also analyzed PCDD/PCDFs and DL-PCBs in sediment samples from Hue and Hanoi, Vietnam. The toxic equivalent quantity (TEQ) values in Can Gio were as high as those in Hue, Hanoi, and suburban areas of Osaka, but much lower than those in urban areas of Osaka. The proportion of the World Health Organization (WHO)-TEQ value contributed by 2,3,7,8-tetrachlorinated dibenzo-p-dioxin (TCDD) in Can Gio was approximately 30%, higher than the values in the other sample areas. These data suggest that residual sedimentary TCDD that originated from aerial spraying of Agent Orange occur in only low concentrations in Can Gio. The main contributors to WHO-TEQ values in Can Gio are natural sources, as in Hue. In contrast, commercial PCBs are the dominant contributors to WHO-TEQ values in Hanoi. In Osaka, agrochemicals used in rice cultivation, the incineration of solid waste, and commercial PCBs equally contributed to WHO-TEQ values at suburban locations. The dumping of incinerator-related materials and/or the inadequate management of commercial PCBs have resulted in significantly elevated WHO-TEQ values of 240-370 ng kg(-1)dw at urban locations in Osaka.

Ultrasound-assisted production of biodiesel fuel from vegetable oils in a small scale circulation process

Biodiesel production from canola oil with methanol was performed in the presence of a base-catalyst by a circulation process at room temperature. In this process, the transesterification was accelerated by ultrasonic irradiation of low frequency (20 kHz) with an input capacity of 1 kW. The influences of various parameters on the transesterification reaction, including the amount of catalyst, the molar ratio of methanol to oil and the reaction time, were investigated. The objective of this work was to produce biodiesel satisfying the biodiesel-fuel standards of low energy consumption and material savings. The optimal conditions were: methanol/oil molar ratio of 5:1 and 0.7 wt.% catalyst in oil. Under these conditions, the conversion of triglycerides to fatty acid methyl esters was greater than 99% within the reaction time of 50 min. Crude biodiesel was purified by washing with tap water and drying at 70 degrees C under reduced pressure.

Seasonal change in the atmospheric concentration of particulate polycyclic aromatic hydrocarbons in Ho Chi Minh City, Vietnam

We analyzed atmospheric particulate polycyclic aromatic hydrocarbons (PAHs) in Ho Chi Minh City, Vietnam, for 19 months. The average concentrations of total PAHs at dry and rainy seasons were 4.28 +/- 2.83 and 15.71 +/- 8.21 ng m(-3), respectively. The use of motorcycles without catalytic converters, estimated to be main emission sources of PAHs, would be higher during the dry season. PAH concentrations show a negative correlation with sunshine duration (r = -0.51). Furthermore, the ratio of average PAH concentration in the dry season to that in the rainy season shows a positive correlation with photolytic half-life (r = 0.94). Thus, seasonal changes in PAH concentrations are attributable to their photolytic degradation.

Sonochemical decomposition of organic acids in aqueous solution: understanding of molecular behavior during cavitation by the analysis of a heterogeneous reaction kinetics model

The sonochemical decomposition of a low concentration of butyric acid was performed in an aqueous solution by use of 200 kHz ultrasound to discuss the reaction kinetics and molecular behavior during cavitation. Taking into account a Langmuir-type adsorption model, we propose a heterogeneous reaction kinetics model, which is based on the local reaction zone at the interface region of the cavitation bubbles, where the adsorption and desorption of butyric acid molecules from the bulk solution occur during bubble oscillation and then the existing molecules inside the local reaction zone are finally decomposed. To confirm our proposed kinetics model, the rates of decomposition were investigated as a function of the initial concentration of butyric acids in the different pH solutions. It was confirmed that our model could be reasonably applied to explain the obtained results and the pseudo rate constant (k) and the equilibrium constant (K) were able to be calculated: k is 8.0 microM min(-1) (pH 2) and 3.5 microM min(-1) (pH 10), and K is 5.7 x 10(-3) microM(-1) (pH 2) and 8.0 x 10(-3) microM(-1) (pH 10), respectively. By the analysis of the obtained K values, it was clear that the ionized organic acid molecules are relatively difficult to accumulate at the reaction zone, because of their lower hydrophobicity compared with that of the neutral ones. The results obtained in the sonochemical decomposition of benzoic acid were also able to be analyzed with the proposed kinetics model. In addition, we proposed an opinion toward the interpretation of a Langmuir-type adsorption model which has often been applied to explain heterogeneous reaction systems.

Effect of reaction vessel diameter on sonochemical efficiency and cavitation dynamics

The influence of reaction vessel diameter on the sonochemical yield was investigated by using reaction vessels with five different diameters. It was revealed that the formation of H(2)O(2) and chloride ion, from the sonolysis of pure water and 1,2,4-trichlorobenzene aqueous solution, was affected by the reaction vessel diameter. That is, these yields increased as the reaction vessel diameter increased up to ø 90 mm and then decreased over ø 90 mm. From the analyses of the measurement of sonochemiluminescence and the calorimetry, it was suggested that active cavitation bubbles were formed at certain zones. In the case of a larger diameter reaction vessel, it was suggested that bubble nuclei that have not grown up to the resonance size, escaped from the sonication zone to the non-sonication zone and dissolved away. As a result, the number of active cavitation bubbles and the yields of H(2)O(2) and chloride ion would decrease in the case of a larger diameter reaction vessel.

Influence of adding salt on ultrasonic atomization in an ethanol-water solution

Ethanol was enriched by ultrasonic atomization. Enrichment ratios were increased by adding salt to the ethanol solution. Different enrichment ratios were observed for different types of salts in a range of low ethanol concentrations. The enrichment ratio was significantly improved by adding K(2)CO(3) or (NH(4))(2)SO(4). It is concluded that this is due to enhanced interfacial adsorption of the ethanol. Addition of Na(2)CO(3) to the ethanol solution also enhanced the interfacial adsorption of the ethanol, but the effect was relatively small. Addition of NaCl to the ethanol solution did not enhance the interfacial adsorption of the ethanol.

Concentrations of atmospheric polycyclic aromatic hydrocarbons in particulate matter and the gaseous phase at roadside sites in Hanoi, Vietnam

We analyzed the concentrations of polycyclic aromatic hydrocarbons (PAHs) in both particulate matter (PM) and the gaseous phase at 10 roadside sites in Hanoi, Vietnam. The average concentrations of 47 PAHs ( summation 47PAHs) were 63 +/- 82 ng m(-3) in PM and 480 +/- 300 ng m(-3) in the gaseous phase. The PAHs mainly originated from motorcycles without catalytic converters. The highest concentrations of summation 47PAHs in both PM and the gaseous phase were observed at a terminal for buses and trucks. The operation of large commercial vehicles led to increased PAH pollution at the terminal site.

Sonochemical degradation of various monocyclic aromatic compounds: relation between hydrophobicities of organic compounds and the decomposition rates

Various aromatic compounds, i.e., nitrobenzene, aniline, phenol, benzoic acid, salicylic acid, 2-chlorophenol, 4-chlorophenol, styrene, chlorobenzene, toluene, ethylbenzene and n-propylbenzene were decomposed under identical ultrasonic irradiation conditions. The relationships between the initial rates of degradation of these aromatic compounds and their physicochemical parameters were systematically investigated. It was revealed that some correlations between the degradation rates and parameters of volatility, Henry's law constant and vapor pressure, were observed only in the limited high range of parameters. It was suggested that the Henry's law constant and vapor pressure had influenced on the rate of degradation for some of the tested aromatic compounds. In contrast, better correlations between the initial rates of degradation and hydrophobic parameters, water solubility and LogP (water-octanol partition coefficient), were observed over the wide range of chosen parameters. These results meant that the hydrophobicity of the compounds significantly affected their accumulation at the gas-liquid interface of the bubbles and it was the most important factor for the sonochemical degradation of aromatic compounds. In particular, for the sonolysis of water-insoluble organic compounds, LogP was found to be the representative parameter for understanding the hydrophobic properties of water-insoluble compounds.

Effect of carbon tetrachloride on sonochemical decomposition of methyl orange in water

Two types of sonicators were used for the sonochemical decomposition of methyl orange (MO) in the presence and absence of carbon tetrachloride (CCl4): One is a 45kHz ultrasonic cleaning bath (a low intensity sonicator) and the other is a 200kHz ultrasonic reactor (a high intensity sonicator). It was clearly confirmed that the rates of the sonochemical decomposition of MO increased with increasing the concentration of CCl4 in both sonicators. The enhancement effect of CCl4 was much higher in the high intensity sonicator than in the low intensity one: by the addition of 100ppm of CCl4, the decomposition ratio of MO with the high intensity sonicator became 41 times larger, while that with the low intensity sonicator became 4.8 times larger. Based on the obtained results, it was suggested that the formed cavitation phenomenon was different between sonicators. It was also suggested that the sonochemical decomposition of MO in the presence of CCl4 would be useful to evaluate the sonochemical efficiency, because the rate of MO decomposition can be effectively enhanced by the sonolysis of CCl4.

Release of nitric oxide and iodine to the atmosphere from the freezing of sea-salt aerosol components

The known room-temperature, solution-phase reaction between nitrite ions and iodide ions, which occurs in acidic conditions (pH < 5.5), is shown to be accelerated when neutral aqueous solutions are frozen. The reaction is proposed to occur in liquid "micropockets" within the ice structure at temperatures between the freezing point and the eutectic temperature. The products, nitric oxide and molecular iodine, are known to play significant roles in atmospheric compositional change, and therefore, the results obtained here, which are not dependent on acidification, may impact on observed snowpack chemistry. Investigation of the effect of oxygen on the chemical processing indicates that a chain reaction mechanism is operative.

Chemical Kinetics of Reactions in the Unfrozen Solution of Ice

Some reactions are accelerated in ice compared to aqueous solution at higher temperatures. Accelerated reactions in ice take place mainly due to the freeze-concentration effect of solutes in an unfrozen solution at temperatures higher than the eutectic point of the solution. Pincock was the first to report an acceleration model for reactions in ice,1 which successfully simulated experimental results. We propose here a modified version of the model for reactions in ice. The new model includes the total molar change involved in reactions in ice. Furthermore, we explain why many reactions are not accelerated in ice. The acceleration of reactions can be observed in the cases of (i) second- or higher-order reactions, (ii) low concentrations, and (iii) reactions with a small activation energy. Reactions with a buffer solution or additives in order to adjust ion strength, zero- or first-order reactions, or reactions containing high reactant concentrations are not accelerated by freezing. We conclude that the acceleration of reactions in the unfrozen solution of ice is not an abnormal phenomenon.

Acoustic multibubble cavitation in water: A new aspect of the effect of a rare gas atmosphere on bubble temperature and its relevance to sonochemistry

Acoustic cavitation generates transient microbubbles with extremely high temperatures and high pressures, which can provide unique reaction routes. The maximum bubble temperature attained is widely known to be dependent on the polytropic index and thermal conductivity of the dissolved gas. Here, we show for the first time experimental evidence that the bubble temperature induced by a high frequency ultrasound is almost the same among different rare gases and the chemical efficiency is in proportion to the gas solubility of rare gases, which would be closely related to the number of active bubbles.

Rise in the pH of an unfrozen solution in ice due to the presence of NaCl and promotion of decomposition of gallic acids owing to a change in the pH

Oxidative decomposition of gallic acid occurs in alkaline solutions but hardly arises in acidic solutions. We have found that the addition of sodium chloride promotes the decomposition of gallic acid caused by freezing even under neutral and acidic conditions. Even at pH 4.5, gallic acid was decomposed by freezing in the presence of NaCl; however, in the absence of NaCl, it was hardly decomposed by freezing at pH lower than 7. Chloride ions are more easily incorporated in ice than sodium ions when the NaCl solution is frozen. The unfrozen solution in ice becomes positively charged, and as a result, protons transfer from the unfrozen solution to the ice. We measured the pH in the unfrozen solution which coexists with single-crystal ice formed from a 5 mmol dm(-3) NaCl solution and determined the pH to be 8.6 at equilibrium with CO(2) of 380 ppm or 11.3 in the absence of CO(2) compared to pH 5.6 in the original solution. From the model calculation performed for gallic acid solution in the presence of 5 mmol dm(-3) NaCl, it can be estimated that the amount of OH(-) transferred from the ice to the solution corresponds to 1.26 x 10(-5) mol dm(-3). The amount of OH(-) transferred is concentrated into the unfrozen solution and affects the pH of the unfrozen solution. Therefore, the pH in an unfrozen gallic acid solution in ice becomes alkaline, and the decomposition of gallic acid proceeds. It is expected that other base-catalyzed reactions in weakly acidic solutions also proceed by freezing in the presence of NaCl without the need for any alkaline reagents.

Impact of NOx reduction on long-term ozone trends in an urban atmosphere

We investigated the relationships between ambient O(3) concentrations and the concentrations of its precursors, NO(x) and NMHC, in Osaka, Japan. The levels of O(x)' (where [O(x)']=[O(3)]+[NO(2)]-0.1x[NO(x)] where the last term accounts for primary emissions of NO(2)) were uniform within the city even in the photochemically active season. We suggested that NO oxidation by peroxy radicals was a minor contributor, and that oxidation of locally emitted NO by background O(3) in the city was the primary control on NO(2) concentrations. Ozone concentrations increased linearly from 1985 to 2002 at a rate of 0.6 ppbv/yr, even though O(x)' concentrations remained constant after the mid 1990s. The trend for O(x)' concentrations could not be explained in terms of an increase in local O(3) production, and the trend was found to reflect background O(3) concentrations in Japan. There was a clear relationship between the NO(2)/O(x)' ratio and NO(x) concentration: the ratio decreased with decreasing NO(x) concentration. As a consequence, O(3) increased with decreasing NO(x) concentration. The reduction of NO(x) emissions was deemed to be an important factor for the recent trend of increasing O(3) concentrations in Osaka City.

Image processing methods to obtain symmetrical distribution from projection image

Flow visualization and measurement of cross-sectional liquid distribution is very effective to clarify the effects of obstacles in a conduit on heat transfer and flow characteristics of gas-liquid two-phase flow. In this study, two methods to obtain cross-sectional distribution of void fraction are applied to vertical upward air-water two-phase flow. These methods need projection image only from one direction. Radial distributions of void fraction in a circular tube and a circular-tube annuli with a spacer were calculated by Abel transform based on the assumption of axial symmetry. On the other hand, cross-sectional distributions of void fraction in a circular tube with a wire coil whose conduit configuration rotates about the tube central axis periodically were measured by CT method based on the assumption that the relative distributions of liquid phase against the wire were kept along the flow direction.

Visualization and void fraction measurement of gas-liquid two-phase flow in plate heat exchanger

Adiabatic and boiling gas-liquid two-phase flows in a simulated plate heat exchanger with a single-ribbed channel were visualized by a thermal neutron radiography method. In the experiments under adiabatic condition, the air-water two-phase flows in an aluminum test section were visualized. In the boiling two-phase flow experiments, chlorofluorocarbon R141b was used as the working fluid. Two-dimensional distributions of void fraction were measured from visualized images via some image processing techniques. As a result, it was shown that both the phases tended to flow straight in the ribbed channel, and mixing of gas and liquid phases was weak. Moreover, when working fluids flew into the test section as a gas-liquid mixture, the phase distributions were strongly affected by a liquid pool at the test section inlet.

Quantitative flow visualization of fluidized-bed heat exchanger by neutron radiography

Quantitative flow visualization of a gas-solid fluidized-bed installed vertical tube-bank has been successfully conducted using neutron radiography and image processing technique. The quantitative data of void fraction distribution as well as the fluctuation data are presented. The time-averaged void fraction is well correlated by the drift-flux model. The bubbles formed in the bed, rise along the vertical tubes and the observed bubble size is smaller than that in a free bubbling bed without tube-banks. The bubble diameter is well correlated by the modified Mori and Wen's correlation taking into account the pitch of tube arrangement. The bubble rise velocity is also well correlated by applying the drift-flux model. These results are consistent for both bed materials of Geldart's B- and A-particles, while the bubble size is significantly different between two kinds of particles.