26
|
Tofangchiha M, Hematzadeh S, Vali ME, Ghonche MRA, Mirzadeh M, Reda R, Testarelli L. Anatomical localization of posterior superior alveolar artery: A retrospective study by cone-beam computed tomography. Dent Med Probl 2022; 59:407-412. [PMID: 36196513 DOI: 10.17219/dmp/145894] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2021] [Revised: 11/21/2021] [Accepted: 01/16/2022] [Indexed: 11/05/2022] Open
Abstract
BACKGROUND Familiarity with the anatomy of the arteries in the sinus wall is essential to prevent the perforation of the sinus membrane and bleeding during dental implant surgery. OBJECTIVES The aim of the study was to evaluate the anatomical position of the posterior superior alveolar artery (PSAA), using cone-beam computed tomography (CBCT). MATERIAL AND METHODS A total of 245 CBCT scans met the eligibility criteria for this cross-sectional study. The vertical distance from the lower border of the artery to the lower border of the sinus floor, the diameter of the artery, and the type of artery (intrasinusoidal, intraosseous or superficial) in the first and second premolar and molar regions were measured. The data was analyzed with the t tests, the one-way analysis of variance (ANOVA) and the χ2 tests. RESULTS The maxillary PSAA was recognized in 187 (76.3%) scans. The mean distance between the artery and the floor of the sinus was 6.87 ±3.68 mm. The mean diameter of the artery was 1.37 ±0.61 mm. The greatest mean diameter of the artery was observed in the second premolar region, and the smallest in the first molar region. As many as 63.6% of the arteries were intraosseous, 28.9% intrasinusoidal, and 7.5% superficial. CONCLUSIONS Due to the high prevalence of the intraosseous type, in most cases of sinus lift surgery there is an increased possibility of PSAA damage. As the largest diameter of the artery was observed in the second premolar region, the possibility of severe bleeding during sinus lift surgery in this area is increased. The average distance between the artery and the floor of the sinus was approx. 7 mm. Consequently, it is recommended that the lower border of the sinus access window should be as high as 7 mm to the floor of the sinus.
Collapse
|
27
|
Reda R, Zanza A, Bhandi S, De Biase A, Testarelli L, Miccoli G. Surgical-anatomical evaluation of mandibular premolars by CBCT among the Italian population. Dent Med Probl 2022; 59:209-216. [DOI: 10.17219/dmp/143546] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022] Open
|
28
|
Guarnieri R, Reda R, Di Nardo D, Miccoli G, Zanza A, Testarelli L. Clinical, radiographic, and biochemical evaluation of two-piece versus one-piece single implants with a laser-microgrooved collar surface after 5 years of functional loading. Clin Implant Dent Relat Res 2022; 24:676-682. [PMID: 35749154 DOI: 10.1111/cid.13118] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2022] [Revised: 05/06/2022] [Accepted: 06/11/2022] [Indexed: 12/29/2022]
Abstract
AIM To compare the clinical and radiographic conditions and the expression of pro-inflammatory cytokines in peri-implant crevicular fluid (PICF) at two-piece/bone level (TP/BL) versus one-piece/tissue level (OP/TL) single implants with a laser-microgrooved collar after at least 5 years of loading. MATERIALS AND METHODS In total, 20 single TP/BL implants and 20 contralateral OP/TL implants, both with a laser-microgrooved collar surface, in 20 systemically and periodontally healthy subjects (12 males and 8 females, between the age of 36 and 64 [mean age of 49.7 ± 12.3 years]), were examined. Levels of IL-1β, IL-1RA, IL-6, IL-8, IL-17, b-FGF, G-CSF, GM-CSF, IFN, MIP-1β, TNF-α, and VEGF were assessed in PICF using the Bio-Plex 200 Suspension Array System. Plaque index (PI), probing depth (PD), bleeding on probing (BOP), and gingival recession (REC) were recorded. Radiographic crestal bone levels (CBL) were assessed at the mesial and distal aspects of the implant sites. RESULTS The mean PI, PD, BOP, and REC values had no significant differences in either group. A higher mean value of CBL with statistical difference was detected for TP/BL compared with OP/TL implants. The levels of IL-1β, IL-6, IL-8, GM-CSF, and MIP-1β and TNF-α were higher at TP/BL implants than at OP/TL implants. However, only IL-1β, IL-6, and TNF-α values presented significant differences between the groups. CONCLUSIONS Although after 5 years of loading single TP/BL and OP/TL implants with a laser-microgrooved collar surface presented similar good clinical conditions, a higher proinflammatory state and higher crestal bone loss were detected for TP/BL implants.
Collapse
|
29
|
Seracchiani M, Reda R, Zanza A, D'Angelo M, Russo P, Luca T. Mechanical performance and Metallurgical Characteristic of Five Different Single-File Reciprocating Instruments: a Comparative in Vitro and Laboratory Study. J Endod 2022; 48:1073-1080. [PMID: 35667568 DOI: 10.1016/j.joen.2022.05.009] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2022] [Revised: 04/16/2022] [Accepted: 05/26/2022] [Indexed: 11/18/2022]
Abstract
INTRODUCTION Since there are no data regarding an instrument recently introduced on the market (OneRECI), the aim of the study was to assess its mechanical and metallurgical properties comparing them with those of widespread reciprocating instruments such as Reciproc, Reciproc Blue, EdgeOne Fire and WaveOne Gold. METHODS A total of 65 NiTi files from five different reciprocating systems (OneRECI, Reciproc, Reciproc Blue, EdgeOne Fire and WaveOne Gold) were evaluated throughout a combined mechanical and metallurgical method. Mechanical performances of the selected file were examined subjecting each specimen to cyclic fatigue, torsional and bending resistance tests, whilst their metallurgical properties were assessed analyzing the nickel-titanium alloy composition and the phase transformation temperatures respectively through an energy-dispersive X-ray spectroscopy (EDX) and a differential scanning calorimetry (DSC). One-way ANOVA and post hoc Tukey's was performed with significance level set to a 95% confidence level. RESULTS The EDX showed a similar alloy composition for all of the tested files, with nickel percentage of about 52-53% and a corresponding percentage of titanium of 47-48%, whilst the DSC analysis, although evidenced martensitic characteristics for all files, showed differences in terms of phase transformation temperatures. Overall, OneRECI showed the best mechanical performances in terms of cyclic fatigue and torsional resistance (respectively of 32.95 ± 2.33 s and 0.76 ± 0.03 Ncm) and flexibility (48.4 ± 4.1 g), with statistically significant differences for all tests (p<0.05). Reciproc files showed the worst flexibility and cyclic fatigue resistance, respectively of 157.2 ± 8.3 g and 9.27 ± 1.18 s, whilst the EdgeOne Fire showed the lowest torsional resistance (0.39 ± 0.12 Ncm), whit statistically significant differences (p<0.05). CONCLUSIONS Within the limitation of this study, the recently introduced file OneRECI showed the best mechanical performance in comparison to the tested instruments, with an equiatomic composition of the NiTi alloy and a martensitic behavior.
Collapse
|
30
|
Tofangchiha M, Ebrahimi A, Adel M, Kermani F, Mohammadi N, Reda R, Testarelli L. In vitro evaluation of Kedo-S and RaCe rotary files compared to hand files in preparing the root canals of primary molar teeth. Front Biosci (Elite Ed) 2022; 14:14. [PMID: 35730455 DOI: 10.31083/j.fbe1402014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/01/2021] [Revised: 01/21/2022] [Accepted: 01/24/2022] [Indexed: 11/06/2022]
Abstract
BACKGROUND AND AIMS Considering the advantages of rotary files in instrumenting the root canals of permanent teeth and a lack of adequate data on the use of these systems in primary teeth, the present study aimed to evaluate two rotary files and compare them with hand files in the cleaning efficacy of the root canals of primary molar teeth. MATERIALS AND METHODS In the present study, three groups of teeth were prepared with Kedo-S paediatric rotary file system, RaCe (reamer with alternating cutting edges), and hand files (n = 40). The groups were evaluated under a stereomicroscope concerning the cleaning efficacy of the files after cleaning the teeth in the apical, middle, and coronal thirds. The data were analyzed with SPSS 24 (IBM Corporation, USA, 2016) using Fisher's exact test and chi-squared test; statistical significance was set at p < 0.05. RESULTS There were no significant differences in the apical and middle thirds between the different study groups. However, there were significant differences in the coronal third between the hand file and Kedo-S (p = 0.016) and RaCe and Kedo-S (p = 0.001) groups. CONCLUSIONS The present study showed that Kedo-S files were more effective than RaCe and hand files in the coronal area than the hand and RaCe files.
Collapse
|
31
|
Zanza A, Russo P, Di Matteo P, Reda R, Di Nardo D, Gambarini G, Testarelli L. Mechanical properties and metallurgical features of two similar endodontic rotary instruments with different heat treatments (FireWire™ and Gold). Sci Prog 2022; 105:368504221103763. [PMID: 35656775 PMCID: PMC10364944 DOI: 10.1177/00368504221103763] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The aim of this study was to explain the mechanical differences between EdgeTaper Platinum (ETP) and ProTaper Gold (PTG) determining the transition temperatures and the composition of the alloy of ETP, since no data are present in literature. A total of 130 instruments were selected: 65 ETP F2 and 65 PTG F2. 20 instruments per type were submitted to each mechanical tests. The cyclic fatigue and torsional tests were performed at a pre-set temperature of 35 °C ± 1 °C. During the cyclic fatigue test, Time to fracture, number of cycles to fracture (NCF) and the fragment length (FL) were recorded. During the static torsional, Torque to Fracture (TtF) and FL were recorded. The fracture surface of 5 randomly selected fragments from each test was examined through a Scanning Electron Microscopy (SEM) and an EDX analysis was performed. 20 instruments per type were submitted to a bending test The force generated (grams) to bend each was recorded. Recorded data of mechanical and metallurgical tests were statistically analyzed using a one-way analysis of variance (ANOVA) test with significance set to a 95% confidence level. ETP F2 showed a higher cyclic fatigue resistance and bending ability than PTG F2, with a statistically significant difference (p < 0.05). PTG showed a higher torsional resistance with a statistically significant difference (p < 0.05). DSC analysis of 5 samples for each instrument type pointed out that the austenite finish temperature of PTG was higher than the ETP, respectively of 49.99 ± 3.31 (°C) and 38.92 ± 1.75 (°C). EDX analysis confirmed the near-equiatomic composition of the Ni-Ti alloys, with a presence of a third component recognized as rubidium in the ETP samples. ETP showed higher flexibility in comparison with PTG, despite the latter is characterized by a more martensitic characterization. since its Af temperature is higher than the ETP.
Collapse
|
32
|
Guarnieri R, Reda R, Di Nardo D, Miccoli G, Zanza A, Testarelli L. In Vitro Direct and Indirect Cytotoxicity Comparative Analysis of One Pre-Hydrated versus One Dried Acellular Porcine Dermal Matrix. MATERIALS 2022; 15:ma15051937. [PMID: 35269168 PMCID: PMC8911924 DOI: 10.3390/ma15051937] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 01/29/2022] [Accepted: 03/04/2022] [Indexed: 02/04/2023]
Abstract
Aim: The aim of the present study was to compare the direct and indirect cytotoxicity of a porcine dried acellular dermal matrix (PDADM) versus a porcine hydrated acellular dermal matrix (PHADM) in vitro. Both are used for periodontal and peri-implant soft tissue regeneration. Materials and methods: Two standard direct cytotoxicity tests—namely, the Trypan exclusion method (TEM) and the reagent WST-1 test (4-3-[4-iodophenyl]-2-[4-nitrophenyl]-2H-[5-tetrazolio]-1,3-benzol-desulphonated)—were performed using human primary mesenchymal stem cells (HPMSCs) seeded directly onto a PDADM and PHADM after seven days. Two standard indirect cytotoxicity tests—namely, lactate dehydrogenase (LTT) and MTT (3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl-2H-tetrazoliumbromide)—were performed using HPMSCs cultivated in eluates from the matrices incubated for 0.16 h (10 min), 1 h, and 24 h in a serum-free cell culture medium. Results: The WST and the TEM tests revealed significantly lower direct cytotoxicity values of HPMSCs on the PHADM compared with the PDADM. The indirect cytotoxicity levels were low for both the PHADM and PDADM, peaking in short-term eluates and decreasing with longer incubation times. However, they were lower for the PHADM with a statistically significant difference (p < 0.005). Conclusions: The results of the current study demonstrated a different biologic behavior between the PHADM and the PDADM, with the hydrated form showing a lower direct and indirect cytotoxicity.
Collapse
|
33
|
Guarnieri R, Zanza A, D’Angelo M, Di Nardo D, Del Giudice A, Mazzoni A, Reda R, Testarelli L. Correlation between Peri-Implant Marginal Bone Loss Progression and Peri-Implant Sulcular Fluid Levels of Metalloproteinase-8. J Pers Med 2022; 12:jpm12010058. [PMID: 35055373 PMCID: PMC8781957 DOI: 10.3390/jpm12010058] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Revised: 12/31/2021] [Accepted: 01/04/2022] [Indexed: 02/04/2023] Open
Abstract
Objectives: The aim of this retrospective study was to analyze peri-implant marginal bone loss levels/rates and peri-implant sulcular fluid levels/rates of metalloproteinase-8 in three timeframes (6 months post-surgery—restoration delivery (T0)—and 6 (T6) and 24 (T24)-months post-loading) and to evaluate if there is a correlation between peri-implant sulcular fluid levels of metalloproteinase-8 and peri-implant marginal bone loss progression. Materials and Methods: Two cohorts of patients undergoing implant surgery between January 2017 and January 2019 were selected in this retrospective study. A total of 39 patients received 39 implants with a laser-microtextured collar surface, and 41 subjects received 41 implants with a machined/smooth surface. For each patient, periapical radiographs and a software package were used to measure marginal bone loss rates. Implant fluid samples were analyzed by an enzyme-linked immunosorbent assay (ELISA) test. The modified plaque index, probing depth, and bleeding on probing were also recorded. Results: High marginal bone rates at T24 were strongly associated with elevated rates between T0 and T6. The levels of metalloproteinase-8 were significantly more elevated around implants with marginal bone loss, in relation to implants without marginal bone loss. Marginal bone loss (MBL) rates at 24 months were associated with initial bone loss rates and initial levels of metalloproteinase-8. Conclusions: Peri-implant marginal bone loss progression is statistically correlated to peri-implant sulcular fluid levels of metalloproteinase-8. Moreover, the initial high levels of marginal bone loss and metalloproteinase-8 can be considered as indicators of the subsequent progression of peri-implant MBL: implants with increased marginal bone loss rates and metalloproteinase-8 levels at 6 months after loading are likely to achieve additional marginal bone loss values.
Collapse
|
34
|
Zanza A, D’Angelo M, Reda R, Gambarini G, Testarelli L, Di Nardo D. An Update on Nickel-Titanium Rotary Instruments in Endodontics: Mechanical Characteristics, Testing and Future Perspective-An Overview. Bioengineering (Basel) 2021; 8:bioengineering8120218. [PMID: 34940371 PMCID: PMC8698980 DOI: 10.3390/bioengineering8120218] [Citation(s) in RCA: 33] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Revised: 12/10/2021] [Accepted: 12/13/2021] [Indexed: 12/21/2022] Open
Abstract
Since the introduction of Nickel-Titanium alloy as the material of choice for the manufacturing of endodontic rotary instruments, the success rate of the root canal therapies has been significantly increased. This success mainly arises from the properties of the Nickel-Titanium alloy: the biocompatibility, the superelasticity and the shape memory effect. Those characteristics have led to a reduction in time of endodontic treatments, a simplification of instrumentation procedures and an increase of predictability and effectiveness of endodontic treatments. Nevertheless, the intracanal separation of Nickel-Titanium rotary instruments is still a major concern of endodontists, with a consequent possible reduction in the outcome rate. As thoroughly demonstrated, the two main causes of intracanal separation of endodontic instruments are the cyclic fatigue and the torsional loads. As results, in order to reduce the percentage of intracanal separation research and manufacturers have been focused on the parameters that directly or indirectly influence mechanical properties of endodontic rotary instruments. This review describes the current state of the art regarding the Nickel-Titanium alloy in endodontics, the mechanical behavior of endodontic rotary instruments and the relative stresses acting on them during intracanal instrumentation, highlighting the limitation of the current literature.
Collapse
|
35
|
Guarnieri R, Miccoli G, Reda R, Mazzoni A, Di Nardo D, Testarelli L. Sulcus fluid volume, IL-6, and Il-1b concentrations in periodontal and peri-implant tissues comparing machined and laser-microtextured collar/abutment surfaces during 12 weeks of healing: A split-mouth RCT. Clin Oral Implants Res 2021; 33:94-104. [PMID: 34624157 DOI: 10.1111/clr.13868] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2021] [Revised: 07/08/2021] [Accepted: 09/13/2021] [Indexed: 01/21/2023]
Abstract
OBJECTIVES To compare gingival tissue healing at surgically manipulated periodontal sites and at sites receiving implants and healing abutments with machined (MS) vs laser-microtextured (LMS) surface placed with one-stage protocol. MATERIAL AND METHODS Twenty-four non-smoking patients each received two implants with one-stage protocol in a split-mouth design on the same jaw. In each patient, one implant with a MS collar and one immediate healing abutment with a MS, and one implant with a LMS collar and one immediate healing abutment with a LMS were used. Soft tissues healing at surgically manipulated periodontal tissues (T+) and at non-surgically manipulated periodontal tissues (T-) at MS implant sites and at LMS implant sites were compared by means of clinical and biochemical parameters at baseline and at 1-2-3-4-6-8 and 12 weeks. RESULTS PD and BoP mean values were statistically higher in MS than LMS implant sites (p<0.05). During early healing phase (1-4 weeks), MS and LMS peri-implant tissues and periodontal tissues at T(+) showed no statistically significant difference in crevicular fluid volume changes (p>0.05). Between 6 and 12 weeks, compared with T(+), no statistically significant difference in crevicular fluid volume and IL-6 and IL-1β concentrations was noted in LMS implant sites (p>0.05), while statistically significantly higher mean values were noted in MS implant sites (p<0.05). CONCLUSIONS Compared with T(+) and T(-), both MS and LMS implant sites presented a higher pro-inflammatory state in the early phase after surgery (1-4 weeks). At 12 weeks, only MS implant sites kept a higher pro-inflammatory state, while at LMS implant sites, it becomes similar to T(+) and T(-).
Collapse
|
36
|
Seracchiani M, Donfrancesco O, Relucenti M, Reda R, Zanza A, Gambarini G, Testarelli L. In Vitro Evaluation of a Recently Developed Rotary File: AF Rotary. BRAZILIAN DENTAL SCIENCE 2021. [DOI: 10.14295/bds.2021.v24i4.2558] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
Objective: Aim of the present study is to evaluate mechanical properties of a newly developed rotary file, AF Rotary (Fanta Dental, Shanghai, China), and to compare these features with a worldwide spread rotary file, Protaper Gold F2 (PTG F2; Dentsply Maillefer, Ballaigues, Switzerland). Material and Methods: 60 AF Rotary 25.06 and 60 PTG F2 were divided in three groups of 20 files each. A group underwent to cyclic fatigue resistance tests, second group underwent to torsional resistance tests, third group underwent to bending tests. The statistical analysis was performed using t student test with significance level set at 95% (p < 0.05). Results: AF Rotary showed significantly higher torsional resistance and cyclic fatigue resistance (p < 0.05) when compared to the PTG F2. AF Rotary also showed significantly lower bending resistance (p < 0.05) when compared to the PTG F2. Conclusion: Therefore, within the limitations of this study, the results show better performances for AF Rotary compared to PTG F2 regarding the cyclic fatigue test, the torsional test and the bending test. Since the PTG F2 is a commonly used and widely investigated instrument it could be possible to state that the AF Rotary exhibits remarkable in vitro performances.
Keywords
AF Rotary; Protaper gold; NiTi rotary instruments; Cyclic fatigue; Torsional resistance.
Collapse
|
37
|
Mahendra J, Mahendra L, Mugri MH, Sayed ME, Bhandi S, Alshahrani RT, Balaji TM, Varadarajan S, Tanneeru S, P. ANR, Srinivasan S, Reda R, Testarelli L, Patil S. Role of Periodontal Bacteria, Viruses, and Placental mir155 in Chronic Periodontitis and Preeclampsia-A Genetic Microbiological Study. Curr Issues Mol Biol 2021; 43:831-844. [PMID: 34449559 PMCID: PMC8929077 DOI: 10.3390/cimb43020060] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2021] [Revised: 07/21/2021] [Accepted: 07/22/2021] [Indexed: 12/24/2022] Open
Abstract
Previous studies assessed the involvement and impact of periodontal bacteria in preeclamptic women with chronic periodontitis. To explore further, the current study aimed to associate periodontal viruses and bacteria with mir155 levels in placental tissues of preeclamptic women with generalized chronic periodontitis. Four-hundred 45 pregnant women, 18-35 years of age, were selected and divided into four groups (controls, A, B, and C) where the Controls included 145 systemically and periodontally healthy pregnant women Group A-100 systemically healthy pregnant women with chronic periodontitis, Group B- 100 preeclamptic women with chronic periodontitis, Group C- 100 preeclamptic women without chronic periodontitis. Age, BMI, SES, and periodontal parameters such as PI, BOP, PPD, and CAL were noted. Periodontal pathogens such as Tf, Td, Pg, Pi, Fn, HSV, EBV, and HCMV were tested in subgingival plaque, placental tissues, and mir155. We observed that PI, BOP, PPD, CAL, Tf, and EBV were highly significant in Group B. We found a higher number of periodontal bacteria, viruses, and mir 155 in Group B showing a higher risk of preeclampsia. More genetic studies in this field are advised to ascertain the role of periodontopathogens and mir 155 in preeclampsia and periodontal inflammation. What is already known on this subject? Periodontal diseases pose an increased risk of developing preeclampsia and delivering preterm and/or low-birth-weight babies. What do the results of this study add? Periodontal variables such as PI, pocket depth, BOP, and clinical attachment levels, were found to be increased in the preeclamptic women with chronic periodontitis. The significant difference was seen in the relative fold expression of mir155 with higher gene expression of mir155 in groups B and A as compared to group C and controls. What are the implications of these findings for clinical practice and/or further research? In our study, mir155 correlation with the periodontal parameters and periodontal pathogens further strengthen the evidence of periodontal inflammation as a risk of preeclampsia in pregnant women especially when associated with chronic periodontitis. mir155 can be considered to be one of the genetic biomarkers and can be used as a diagnostic tool for the early detection of PE.
Collapse
|
38
|
Bhandi S, Mashyakhy M, Abumelha AS, Alkahtany MF, Jamal M, Chohan H, Raj AT, Testarelli L, Reda R, Patil S. Complete Obturation-Cold Lateral Condensation vs. Thermoplastic Techniques: A Systematic Review of Micro-CT Studies. MATERIALS (BASEL, SWITZERLAND) 2021; 14:4013. [PMID: 34300930 PMCID: PMC8304925 DOI: 10.3390/ma14144013] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/09/2021] [Revised: 07/10/2021] [Accepted: 07/12/2021] [Indexed: 01/31/2023]
Abstract
To prevent re-infection and provide a hermetic seal of the root canal system, an endodontist must aim to produce a void-free obturation. This review aimed to compare the completeness of root canal obturation between the two most prevalent methods-cold lateral condensation and warm gutta-percha techniques-using micro-CT (PROSPERO reg no. 249815). MATERIALS AND METHODS A search of Scopus, Embase, PubMed (Medline via PubMed), and Web of Science databases was done without any time restriction according to the PRISMA protocol. Articles that compared both techniques and were published in English were included. Data was extracted and the risk of bias was assessed using an adapted tool based on previous studies. RESULTS A total of 141 studies were identified by the search. Following the screening and selection of articles, 9 studies were included for review. Data was extracted manually and tabulated. Most studies had a moderate risk of bias. None determined operator skill in both methods before comparison. The data extracted from the included studies suggests that both techniques produce voids in the obturation. The thermoplasticized gutta-percha techniques may result in fewer voids compared to cold lateral condensation. CONCLUSION Considering the limitations of the included studies, it was concluded that neither technique could completely obturate the root canal. Thermoplasticized gutta-percha techniques showed better outcomes despite a possible learning bias in favor of cold lateral condensation. Establishing operator skills before comparison may help reduce this bias.
Collapse
|
39
|
Patil S, Alkahtani A, Bhandi S, Mashyakhy M, Alvarez M, Alroomy R, Hendi A, Varadarajan S, Reda R, Raj AT, Testarelli L. Ultrasound Imaging versus Radiographs in Differentiating Periapical Lesions: A Systematic Review. Diagnostics (Basel) 2021; 11:1208. [PMID: 34359291 PMCID: PMC8303698 DOI: 10.3390/diagnostics11071208] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2021] [Revised: 06/29/2021] [Accepted: 07/02/2021] [Indexed: 12/25/2022] Open
Abstract
BACKGROUND Ultrasonography is a non-invasive method of diagnosing periapical lesions while radiologic methods are more common. Periapical lesions due to endodontic infection are one of the most common causes of periapical radiolucency that need to be distinguished to help determine the course of treatment. This review aimed to examine the accuracy of ultrasound and compare it to radiographs in distinguishing these lesions in vivo. METHODS This review process followed the PRISMA guidelines. A literature search of databases (PubMed, Scopus, Embase, and Web of Science) was conducted without any restrictions on time. Articles available in English were included. The selection was done according to the inclusion and exclusion criteria. The QUADAS-2 tool was used to assess the quality of the studies. RESULTS The search provided a total of 87 articles, out of which, five were selected for the final review. In all the studies, ultrasound had higher accuracy in distinguishing periapical lesions. All the studies indicated a risk of bias, especially in patient selection. CONCLUSION Within limitations, the study indicates that ultrasound is a better diagnostic tool to distinguish periapical lesions compared to radiographs but further studies with well-designed, rigorous protocols and low risk of bias are needed to provide stronger evidence.
Collapse
|
40
|
Bhandi S, Alkahtani A, Mashyakhy M, Abumelha AS, Albar NHM, Renugalakshmi A, Alkahtany MF, Robaian A, Almeslet AS, Patil VR, Varadarajan S, Balaji TM, Reda R, Testarelli L, Patil S. Effect of Ascorbic Acid on Differentiation, Secretome and Stemness of Stem Cells from Human Exfoliated Deciduous Tooth (SHEDs). J Pers Med 2021; 11:jpm11070589. [PMID: 34206203 PMCID: PMC8304986 DOI: 10.3390/jpm11070589] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2021] [Revised: 06/16/2021] [Accepted: 06/20/2021] [Indexed: 12/23/2022] Open
Abstract
Stem cells from human exfoliated deciduous teeth (SHEDs) are considered a type of mesenchymal stem cells (MSCs) because of their unique origin from the neural crest. SHEDs can self-renewal and multi-lineage differentiation with the ability to differentiate into odontoblasts, osteoblast, chondrocytes, neuronal cells, hepatocytes, adipocytes, etc. They are emerging as an ideal source of MSCs because of their easy availability and extraordinary cell number. Ascorbic acid, or vitamin C, has many cell-based applications, such as bone regeneration, osteoblastic differentiation, or extracellular matrix production. It also impacts stem cell plasticity and the ability to sustain pluripotent activity. In this study, we evaluate the effects of ascorbic acid on stemness, paracrine secretion, and differentiation into osteoblast, chondrocytes, and adipocytes. SHEDs displayed enhanced multifaceted activity, which may have applications in regenerative therapy.
Collapse
|
41
|
Ghosh S, Rao RS, Upadhyay MK, Kumari K, Sanketh DS, Raj AT, Parveen S, Alhazmi YA, Jethlia A, Mushtaq S, Sarode S, Reda R, Patil S, Testarelli L. Proliferative Verrucous Leukoplakia Revisited: A Retrospective Clinicopathological Study. Clin Pract 2021; 11:337-346. [PMID: 34205902 PMCID: PMC8293104 DOI: 10.3390/clinpract11020048] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Revised: 05/19/2021] [Accepted: 05/24/2021] [Indexed: 11/16/2022] Open
Abstract
(1) Objective: To review the criteria proposed by Cerero-Lapiedra et al. and to retrospectively identify the under-diagnosed disease in patients diagnosed with proliferative verrucous leukoplakia. (2) Materials and methods: In this study, we included patients who were diagnosed with leukoplakia (histological label consistent with the clinical diagnosis, n = 95), and cases with a final diagnosis within the spectrum of proliferative verrucous leukoplakia (n = 110) as defined by Batsakis et al. We applied the criteria proposed by Cerero-Lepiedra et al. to screen for the possible cases of proliferative verrucous leukoplakia. (3) Results: Although many of our patients satisfied specific isolated criteria, only 11 cases satisfied specific combinations of the guidelines to satisfy a diagnosis of proliferative verrucous leukoplakia. However, due to the lack of follow-up data, the disease is not confirmed in these 11 cases. (4) Conclusion: A limited number of cases of proliferative verrucous leukoplakia were diagnosed using the criteria given by Cerero-Lapiedra et al. The true natural history of the disease could not be studied due to the lack of follow-up data. (5) Clinical relevance: Proliferative verrucous leukoplakia presenting as hyperkeratosis or mild epithelial dysplasia are often not followed up, and they subsequently transform into carcinoma. Thus, clinicians must be vigilant whenever they encounter leukoplakia, especially with multifocal presentations. In such cases, the follow-up data are the key to understanding the true nature of the disease entity.
Collapse
|
42
|
Perrotti G, Baccaglione G, Clauser T, Scaini R, Grassi R, Testarelli L, Reda R, Testori T, Del Fabbro M. Total Face Approach (TFA) 3D Cephalometry and Superimposition in Orthognathic Surgery: Evaluation of the Vertical Dimensions in a Consecutive Series. Methods Protoc 2021; 4:mps4020036. [PMID: 34069808 PMCID: PMC8162563 DOI: 10.3390/mps4020036] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2021] [Revised: 05/13/2021] [Accepted: 05/14/2021] [Indexed: 11/16/2022] Open
Abstract
Background: Cephalometry is fundamental in diagnosis, analysis, and planning of orthodontic-surgical treatment as it reveals skeletal relationship between the upper and lower jaw as well as facial aesthetic parameters. Nevertheless, 3D cephalometry has still not become the exam of choice in orthognathic treatment even though today CBCT (Cone Beam Computed Tomography) is routinely used in other branches of dentistry. Methods: In a sample of 13 patients undergoing bimaxillary orthognathic surgery a chin-vertex CBCT exam was prescribed prior to orthodontic treatment (OT) and 12 months after surgery (T1). The DICOM files uploaded to MaterialiseSimplant Ortho software pro 2.1 (Materialise Co., Leuven, Belgium) were analyzed following the multiplane 3D Total Face cephalometry protocol (TFA). Results: Results comparing pre-op and post-op TFA 3D cephalometry, were then evaluated considering reference values reported in literature. The CBCT, carried out pre- and post-surgery, were subsequently analyzed employing the superimposition method using cranial base as reference. The aim of this study is to evaluate the advantages and disadvantages of the two methods in orthognathic surgery. Conclusions: Multiplane 3D TFA allows the clinician to locate where major or minor skeletal discrepancies are found with respect to ideal parameters and is also useful in classifying skeletal intermaxillary relation. The superimposition method is highly intuitive but does not provide information on the quantity and location of osteotomic movement.
Collapse
|
43
|
Balaji TM, Varadarajan S, Jagannathan R, Mahendra J, Fageeh HI, Fageeh HN, Mushtaq S, Baeshen HA, Bhandi S, Gupta AA, Raj AT, Reda R, Patil S, Testarelli L. Melatonin as a Topical/Systemic Formulation for the Management of Periodontitis: A Systematic Review. MATERIALS 2021; 14:ma14092417. [PMID: 34066498 PMCID: PMC8124881 DOI: 10.3390/ma14092417] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/15/2021] [Revised: 04/29/2021] [Accepted: 05/02/2021] [Indexed: 01/23/2023]
Abstract
Objectives: To qualitatively and quantitatively review the use of melatonin as a topical/systemic formulation for the management of periodontitis. Materials and methods: PubMed; Scopus; and Web of Science databases were searched using the MesH terms “melatonin” and “periodontitis”. Title and abstracts were screened to eliminate irrelevant and duplicate articles. The full text data of the screened articles were assessed using the selection criteria. Results: Of 176 identified articles (PubMed-66; Scopus-56; Web of Science-52; Cross-reference-2), only 12 studies qualified to be included in the systematic review. Four studies assessed the independent effect of 1% topical melatonin formulation while 8 articles assessed the adjunctive use of systemic melatonin formulation (1–10 mg) following scaling and root planing (SRP). All studies showed an improvement in periodontal parameters such as pocket depth, clinical attachment loss, periodontal disease index, community periodontal index, gingival bleeding scores, and prognostic marker levels in saliva and serum. A meta-analysis of data from 2 studies revealed that 1–2 mg (systemic) melatonin supplementation reduced pocket depth; although the difference was not statistically significant and hence cannot be interpreted or used for conclusive evidence. Risk of Bias Assessment tool (RoBANS) and Cochrane Collaboration RoB tool elicited a high risk of bias in the included studies. GRADE (recommendation assessment, development, and evaluation) inferred a weak recommendation for the use of melatonin in periodontitis management. Conclusions: Melatonin supplementation (topical and systemic) in periodontitis patients improved key periodontal parameters including pocket depth and clinical attachment loss. Clinical relevance: Melatonin could be a potential host modulatory agent for periodontitis management; although the data from the present review should be interpreted carefully due to the associated high risk of bias.
Collapse
|
44
|
Zanza A, Seracchiani M, Di Nardo D, Reda R, Gambarini G, Testarelli L. A Paradigm Shift for Torsional Stiffness of Nickel-Titanium Rotary Instruments: A Finite Element Analysis. J Endod 2021; 47:1149-1156. [PMID: 33915175 DOI: 10.1016/j.joen.2021.04.017] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2020] [Revised: 03/16/2021] [Accepted: 04/14/2021] [Indexed: 11/29/2022]
Abstract
INTRODUCTION The aim of this study was to investigate the influence of mass and the polar moment of inertia on the torsional behavior of nickel-titanium rotary instruments to understand which parameter of cross-sectional design had a key role in terms of torsional resistance. METHODS Four different instrument models were designed and meshed using computer-aided engineering software (SolidWorks; Dassault Systems, Waltham, MA). Instrument models shared the same characteristics, except for cross-sectional design; triangle, rectangle, square, and hollow square geometry was selected. Finite element analysis was performed simulating a static torsional test using the FEEPlus internal solver (Solid Works). Von Mises stress and torsional load at fracture were calculated by the software. Linear regression analysis was performed to investigate the relationship of the polar moment of inertia, cross-sectional area, inner core radius, and mass per volume on the torsional resistance of nickel-titanium rotary instruments. RESULTS The polar moment of inertia positively affected the maximum torsional load with the highest level of correlation (R2 = 0.917). It could be stated that the higher the polar moment of inertia is, the more maximum torsional load at fracture is present. Mass and cross-sectional area had a lower level of correlation compared with the polar moment of inertia (R2 = 0.5533). According to this, 2 instruments with the same mass/mm and/or cross-sectional area could have different torsional resistance. CONCLUSIONS The polar moment of inertia can be considered as the most important cross-sectional factor in determining the torsional resistance of rotary instruments over metal mass and cross-sectional area.
Collapse
|
45
|
Bhandi S, Seracchiani M, Donfrancesco O, Reda R, Mazzoni A, Nottola S, Familiari G, Testarelli L, Gambarini G. Nickel-Titanium Rotary Instruments: An In Vitro Comparison (Torsional Resistance of Two Heat-treated Reciprocating Files). J Contemp Dent Pract 2021; 22:361-364. [PMID: 34267004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
AIM AND OBJECTIVE The present study aims to evaluate the difference in torsional resistance of two reciprocating nickel-titanium (Ni-Ti) rotary files: WaveOne Gold and EdgeOne Fire. MATERIALS AND METHODS A total of 40 nickel-titanium rotary instruments (n = 40): 20 WaveOne Gold Small (WOGS) and 20 EdgeOne Fire Small (EOFS) were divided into two groups. Each instrument was tested using a torsional resistance device already validated in previous studies to evaluate and compare torsional resistance. The static torsional test was implemented by blocking each instrument at 3 mm from the tip and rotating it until fracture with a reciprocating motion. Torque to fracture (TtF) and fragment length (FL) were measured and statistically analyzed. RESULTS Statistical analysis of TtF found significant differences between the two groups (p<0.05). The EOFS showed higher TtF if compared to WOGS, with a mean value and a standard deviation of 3.05 ± 0.07 (N cm) against 2.97 ± 0.08 (N cm). Data for FL showed no significant differences (p>0.05) between the two groups. CONCLUSION According to the results of this study, it is reasonable to assert that EOFS instruments showed a higher torsional resistance if compared to the WOGS. CLINICAL SIGNIFICANCE As evidenced by this study, EOFS should be considered as a safer solution, in terms of torsional resistance, if compared to WOGS, reducing the risk of intracanal separation due to excessive torsional load.
Collapse
|
46
|
Reda R, Zanza A. A Comprehensive In Vitro Comparison of Mechanical Properties of Two Rotary Endodontic Instruments. ACTA ACUST UNITED AC 2020. [DOI: 10.5005/jp-journals-10015-1729] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
47
|
Gambarini G, Seracchiani M, D'Angelo M, Reda R, Testarelli L. Future Trends in Endodontics: From the Virtual Assessment of the Anatomy to the Computer-driven Approach. J Contemp Dent Pract 2020; 21:1. [PMID: 32381792] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Root canal treatment is one of the most challenging practices in dentistry as the complexity and the variability of the endodontic space can often lead the operator to create false trajectories or missing canals. The technical advances in the development of even more efficient and resistant endodontic instrument reached important results in the last few years with the adoption of NiTi alloys and thermal treatments, which could increase the flexibility and the resistance of the instruments.1,2.
Collapse
|
48
|
Aleandri MP, Martignoni D, Reda R, Alfaro-Fernández A, Font MI, Armengol J, Chilosi G. First Report of Olpidium bornovanus and O. virulentus on Melon in Italy. PLANT DISEASE 2014; 98:997. [PMID: 30708871 DOI: 10.1094/pdis-10-13-1041-pdn] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
A survey for the presence of Olpidium spp. on melon (Cucumis melo L.) was conducted during the beginning of 2013 in central Italy in an unheated greenhouse, located in the melon-producing coastal area of north Latium (central Italy, Viterbo Province) (42°23'09.31″N, 11°30'46.10″E) with a history of monosporascus root rot and vine decline (MRRVD). For this aim, 10 soil samples were collected adjacent to the roots of plants symptomatic of MRRVD, represented by root lesions and rots and loss of smaller feeder roots. Olpidium was baited from collected infested soil by growing melon (cv. Dinero) plants for 45 days. Bait plants grown in sterilized soil were used as negative controls. All the baited melon roots were analyzed by morphological and molecular methods. For the morphological analysis, feeder roots were clarified in a 1.5% KOH solution for 24 h (2) and observed under a light microscope to record the presence or absence of sporangia and resting spores of Olpidium spp., which were observed in baited melon plants grown in infested soil and not in control roots. In particular, stellate resting spores were referred to as O. virulentus because this species cannot be distinguished from O. brassicae, which does not colonize melon. O. bornovanus had smooth-walled resting spores with a honeycomb-like pattern (2). For molecular analysis, DNA was extracted from 21 melon roots and tested by multiplex PCR to confirm Olpidium spp. identification (2). Based on molecular identification, O. virulentus was identified in 40% of samples, and O. bornovanus was identified in 10%. There were no mixed infections in the same sample. Two amplified PCR products, corresponding to O. bornovanus and O. virulentus expected fragment sizes of 977 and 579 bp respectively, were sequenced (GenBank Accession Nos. KF661295 and KF661296). BLAST analysis of the sequences showed 99% nucleotide identity with O. bornovanus isolate CH from Japan collected in melon roots (AB205215) and O. virulentus isolate HY-1 from Japan collected in lettuce roots as reported by Sasaya and Koganezawa (3) (AB205204, formerly O. brassicae). At the end of the experiment, the root systems of all inoculated plants appeared brown, whereas neither symptoms nor sporangia and resting spores were observed in roots of control plants. Olpidium spp. are root-infecting plant pathogens of melon (4), acting as vectors of Melon necrotic spot virus (MNSV) and other destructive plant viruses (1). Moreover, they are directly involved in the induction of germination of ascospores of Monosporascus cannonballus, the causal agent of MRRVD of cucurbits (4). To our knowledge, this is the first report of O. virulentus and O. bornovanus on melon in Italy. References: (1) A. Alfaro-Fernández et al. J. Phytopathol. 91:1250, 2009. (2) J. A. Herrera-Vásquez et al. Mycol. Res. 113:602, 2009. (3) T. Sasaya and H. Koganezawa. J. Gen. Plant Pathol. 72:20, 2006. (4) M. E. Stanghellini and I. J. Misaghi. Phytopathology 101:794, 2011.
Collapse
|
49
|
Bourazza A, Kerouache A, Reda R, Mounach J, Mosseddaq R. Méningovascularite d’origine syphilitique : étude de cinq cas. Rev Neurol (Paris) 2008; 164:369-73. [DOI: 10.1016/j.neurol.2007.12.007] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2003] [Revised: 12/18/2007] [Accepted: 12/26/2007] [Indexed: 11/29/2022]
|
50
|
Litvinov YA, Bosch F, Geissel H, Kurcewicz J, Patyk Z, Winckler N, Batist L, Beckert K, Boutin D, Brandau C, Chen L, Dimopoulou C, Fabian B, Faestermann T, Fragner A, Grigorenko L, Haettner E, Hess S, Kienle P, Knöbel R, Kozhuharov C, Litvinov SA, Maier L, Mazzocco M, Montes F, Münzenberg G, Musumarra A, Nociforo C, Nolden F, Pfützner M, Plass WR, Prochazka A, Reda R, Reuschl R, Scheidenberger C, Steck M, Stöhlker T, Torilov S, Trassinelli M, Sun B, Weick H, Winkler M. Measurement of the beta+ and orbital electron-capture decay rates in fully ionized, hydrogenlike, and heliumlike 140Pr ions. PHYSICAL REVIEW LETTERS 2007; 99:262501. [PMID: 18233571 DOI: 10.1103/physrevlett.99.262501] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2007] [Indexed: 05/25/2023]
Abstract
We report on the first measurement of the beta+ and orbital electron-capture decay rates of 140Pr nuclei with the simplest electron configurations: bare nuclei, hydrogenlike, and heliumlike ions. The measured electron-capture decay constant of hydrogenlike 140Pr58+ ions is about 50% larger than that of heliumlike 140Pr57+ ions. Moreover, 140Pr ions with one bound electron decay faster than neutral 140Pr0+ atoms with 59 electrons. To explain this peculiar observation one has to take into account the conservation of the total angular momentum, since only particular spin orientations of the nucleus and of the captured electron can contribute to the allowed decay.
Collapse
|