Robust Saliva-Based RNA Extraction-Free One-Step Nucleic Acid Amplification Test for Mass SARS-CoV-2 Monitoring

Early diagnosis with rapid detection of the virus plays a key role in preventing the spread of infection and in treating patients effectively. In order to address the need for a straightforward detection of SARS-CoV-2 infection and assessment of viral spread, we developed rapid, sensitive, extraction-free one-step reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP) tests for detecting SARS-CoV-2 in saliva. We analyzed over 700 matched pairs of saliva and nasopharyngeal swab (NSB) specimens from asymptomatic and symptomatic individuals. Saliva, as either an oral cavity swab or passive drool, was collected in an RNA stabilization buffer. The stabilized saliva specimens were heat-treated and directly analyzed without RNA extraction. The diagnostic sensitivity of saliva-based RT-qPCR was at least 95% in individuals with subclinical infection and outperformed RT-LAMP, which had at least 70% sensitivity when compared to NSBs analyzed with a clinical RT-qPCR test. The diagnostic sensitivity for passive drool saliva was higher than that of oral cavity swab specimens (95% and 87%, respectively). A rapid, sensitive one-step extraction-free RT-qPCR test for detecting SARS-CoV-2 in passive drool saliva is operationally simple and can be easily implemented using existing testing sites, thus allowing high-throughput, rapid, and repeated testing of large populations. Furthermore, saliva testing is adequate to detect individuals in an asymptomatic screening program and can help improve voluntary screening compliance for those individuals averse to various forms of nasal collections.

Disruption of disulfides within RBD of SARS-CoV-2 spike protein prevents fusion and represents a target for viral entry inhibition by registered drugs

The SARS‐CoV‐2 pandemic imposed a large burden on health and society. Therapeutics targeting different components and processes of the viral infection replication cycle are being investigated, particularly to repurpose already approved drugs. Spike protein is an important target for both vaccines and therapeutics. Insights into the mechanisms of spike‐ACE2 binding and cell fusion could support the identification of compounds with inhibitory effects. Here, we demonstrate that the integrity of disulfide bonds within the receptor‐binding domain (RBD) plays an important role in the membrane fusion process although their disruption does not prevent binding of spike protein to ACE2. Several reducing agents and thiol‐reactive compounds are able to inhibit viral entry. N‐acetyl cysteine amide, L‐ascorbic acid, JTT‐705, and auranofin prevented syncytia formation, viral entry into cells, and infection in a mouse model, supporting disulfides of the RBD as a therapeutically relevant target.

Coiled-coil heterodimers with increased stability for cellular regulation and sensing SARS-CoV-2 spike protein-mediated cell fusion

Coiled-coil (CC) dimer-forming peptides are attractive designable modules for mediating protein association. Highly stable CCs are desired for biological activity regulation and assay. Here, we report the design and versatile applications of orthogonal CC dimer-forming peptides with a dissociation constant in the low nanomolar range. In vitro stability and specificity was confirmed in mammalian cells by enzyme reconstitution, transcriptional activation using a combination of DNA-binding and a transcriptional activation domain, and cellular-enzyme-activity regulation based on externally-added peptides. In addition to cellular regulation, coiled-coil-mediated reporter reconstitution was used for the detection of cell fusion mediated by the interaction between the spike protein of pandemic SARS-CoV2 and the ACE2 receptor. This assay can be used to investigate the mechanism of viral spike protein-mediated fusion or screening for viral inhibitors under biosafety level 1 conditions.

A Nanoscaffolded Spike-RBD Vaccine Provides Protection against SARS-CoV-2 with Minimal Anti-Scaffold Response

The response of the adaptive immune system is augmented by multimeric presentation of a specific antigen, resembling viral particles. Several vaccines have been designed based on natural or designed protein scaffolds, which exhibited a potent adaptive immune response to antigens; however, antibodies are also generated against the scaffold, which may impair subsequent vaccination. In order to compare polypeptide scaffolds of different size and oligomerization state with respect to their efficiency, including anti-scaffold immunity, we compared several strategies of presentation of the RBD domain of the SARS-CoV-2 spike protein, an antigen aiming to generate neutralizing antibodies. A comparison of several genetic fusions of RBD to different nanoscaffolding domains (foldon, ferritin, lumazine synthase, and β-annulus peptide) delivered as DNA plasmids demonstrated a strongly augmented immune response, with high titers of neutralizing antibodies and a robust T-cell response in mice. Antibody titers and virus neutralization were most potently enhanced by fusion to the small β-annulus peptide scaffold, which itself triggered a minimal response in contrast to larger scaffolds. The β-annulus fused RBD protein increased residence in lymph nodes and triggered the most potent viral neutralization in immunization by a recombinant protein. Results of the study support the use of a nanoscaffolding platform using the β-annulus peptide for vaccine design.

Tailored Modulation of Cellular Pro-inflammatory Responses With Disaccharide Lipid A Mimetics

Pro-inflammatory signaling mediated by Toll-like receptor 4 (TLR4)/myeloid differentiation-2 (MD-2) complex plays a crucial role in the instantaneous protection against infectious challenge and largely contributes to recovery from Gram-negative infection. Activation of TLR4 also boosts the adaptive immunity which is implemented in the development of vaccine adjuvants by application of minimally toxic TLR4 activating ligands. The modulation of pro-inflammatory responses via the TLR4 signaling pathway was found beneficial for management of acute and chronic inflammatory disorders including asthma, allergy, arthritis, Alzheimer disease pathology, sepsis, and cancer. The TLR4/MD-2 complex can recognize the terminal motif of Gram-negative bacterial lipopolysaccharide (LPS)—a glycophospholipid lipid A. Although immense progress in understanding the molecular basis of LPS-induced TLR4-mediated signaling has been achieved, gradual, and predictable TLR4 activation by structurally defined ligands has not yet been attained. We report on controllable modulation of cellular pro-inflammatory responses by application of novel synthetic glycolipids—disaccharide-based lipid A mimetics (DLAMs) having picomolar affinity for TLR4/MD-2. Using crystal structure inspired design we have developed endotoxin mimetics where the inherently flexible β(1 → 6)-linked diglucosamine backbone of lipid A is replaced by a conformationally restricted α,α-(1↔1)-linked disaccharide scaffold. The tertiary structure of the disaccharide skeleton of DLAMs mirrors the 3-dimensional shape of TLR4/MD-2 bound E. coli lipid A. Due to exceptional conformational rigidity of the sugar scaffold, the specific 3D organization of DLAM must be preserved upon interaction with proteins. These structural factors along with specific acylation and phosphorylation pattern can ensure picomolar affinity for TLR4 and permit efficient dimerization of TLR4/MD-2/DLAM complexes. Since the binding pose of lipid A in the binding pocket of MD-2 (±180°) is crucial for the expression of biological activity, the chemical structure of DLAMs was designed to permit a predefined binding orientation in the binding groove of MD-2, which ensured tailored and species-independent (human and mice) TLR4 activation. Manipulating phosphorylation and acylation pattern at the sugar moiety facing the secondary dimerization interface allowed for adjustable modulation of the TLR4-mediated signaling. Tailored modulation of cellular pro-inflammatory responses by distinct modifications of the molecular structure of DLAMs was attained in primary human and mouse immune cells, lung epithelial cells and TLR4 transfected HEK293 cells.

Triangular in Vivo Self-Assembling Coiled-Coil Protein Origami

Coiled-coil protein origami (CCPO) polyhedra are designed self-assembling nanostructures constructed from coiled coil (CC)-forming modules connected into a single chain. For testing new CCPO building modules, simpler polyhedra could be used that should maintain most features relevant to larger scaffolds. We show the design and characterization of nanoscale single-chain triangles, composed of six concatenated parallel CC dimer-forming segments connected by flexible linker peptides. The polypeptides self-assembled in bacteria in agreement with the design, and the shape of the polypeptides was confirmed with small-angle X-ray scattering. Fusion with split-fluorescent protein domains was used as a functional assay in bacteria, based on the discrimination between the correctly folded and misfolded nanoscale triangles comprising correct, mismatched, or truncated modules. This strategy was used to evaluate the optimal size of linkers between CC segments which comprised eight amino acid residues.

Self-assembly and regulation of protein cages from pre-organised coiled-coil modules

Coiled-coil protein origami (CCPO) is a modular strategy for the de novo design of polypeptide nanostructures. CCPO folds are defined by the sequential order of concatenated orthogonal coiled-coil (CC) dimer-forming peptides, where a single-chain protein is programmed to fold into a polyhedral cage. Self-assembly of CC-based nanostructures from several chains, similarly as in DNA nanotechnology, could facilitate the design of more complex assemblies and the introduction of functionalities. Here, we show the design of a de novo triangular bipyramid fold comprising 18 CC-forming segments and define the strategy for the two-chain self-assembly of the bipyramidal cage from asymmetric and pseudo-symmetric pre-organised structural modules. In addition, by introducing a protease cleavage site and masking the interfacial CC-forming segments in the two-chain bipyramidal cage, we devise a proteolysis-mediated conformational switch. This strategy could be extended to other modular protein folds, facilitating the construction of dynamic multi-chain CC-based complexes.

Coiled-coil protein origami is a strategy for the de novo design of polypeptide nanostructures based on coiled-coil dimer forming peptides, where a single chain protein folds into a polyhedral cage. Here, the authors design a single-chain triangular bipyramid and also demonstrate that the bipyramid can be self-assembled as a heterodimeric complex, comprising pre-defined subunits.

Designed folding pathway of modular coiled-coil-based proteins

Natural proteins are characterised by a complex folding pathway defined uniquely for each fold. Designed coiled-coil protein origami (CCPO) cages are distinct from natural compact proteins, since their fold is prescribed by discrete long-range interactions between orthogonal pairwise-interacting coiled-coil (CC) modules within a single polypeptide chain. Here, we demonstrate that CCPO proteins fold in a stepwise sequential pathway. Molecular dynamics simulations and stopped-flow Förster resonance energy transfer (FRET) measurements reveal that CCPO folding is dominated by the effective intra-chain distance between CC modules in the primary sequence and subsequent folding intermediates, allowing identical CC modules to be employed for multiple cage edges and thus relaxing CCPO cage design requirements. The number of orthogonal modules required for constructing a CCPO tetrahedron can be reduced from six to as little as three different CC modules. The stepwise modular nature of the folding pathway offers insights into the folding of tandem repeat proteins and can be exploited for the design of modular protein structures based on a given set of orthogonal modules.

Novel Regeneration Approach for Creating Reusable FO-SPR Probes with NTA Surface Chemistry

To date, surface plasmon resonance (SPR) biosensors have been exploited in numerous different contexts while continuously pushing boundaries in terms of improved sensitivity, specificity, portability and reusability. The latter has attracted attention as a viable alternative to disposable biosensors, also offering prospects for rapid screening of biomolecules or biomolecular interactions. In this context here, we developed an approach to successfully regenerate a fiber-optic (FO)-SPR surface when utilizing cobalt (II)-nitrilotriacetic acid (NTA) surface chemistry. To achieve this, we tested multiple regeneration conditions that can disrupt the NTA chelate on a surface fully saturated with His6-tagged antibody fragments (scFv-33H1F7) over ten regeneration cycles. The best surface regeneration was obtained when combining 100 mM EDTA, 500 mM imidazole and 0.5% SDS at pH 8.0 for 1 min with shaking at 150 rpm followed by washing with 0.5 M NaOH for 3 min. The true versatility of the established approach was proven by regenerating the NTA surface for ten cycles with three other model system bioreceptors, different in their size and structure: His6-tagged SARS-CoV-2 spike fragment (receptor binding domain, RBD), a red fluorescent protein (RFP) and protein origami carrying 4 RFPs (Tet12SN-RRRR). Enabling the removal of His6-tagged bioreceptors from NTA surfaces in a fast and cost-effective manner can have broad applications, spanning from the development of biosensors and various biopharmaceutical analyses to the synthesis of novel biomaterials.

A guide to the design of synthetic gene networks in mammalian cells

Synthetic biology aims to harness natural and synthetic biological parts and engineering them in new combinations and systems, producing novel therapies, diagnostics, bioproduction systems, and providing information on the mechanism of function of biological systems. Engineering cell function requires the rewiring or de novo construction of cell information processing networks. Using natural and synthetic signal processing elements, researchers have demonstrated a wide array of signal sensing, processing and propagation modules, using transcription, translation, or post-translational modification to program new function. The toolbox for synthetic network design is ever-advancing and has still ample room to grow. Here, we review the diversity of synthetic gene networks, types of building modules, techniques of regulation, and their applications.

The NLRP3 inhibitor MCC950 inhibits IL-1β production in PBMC from 19 patients with Cryopyrin-Associated Periodic Syndrome and in 2 patients with Schnitzler’s Syndrome

Background: The cryopyrin-associated periodic syndromes (CAPS) are a group of inherited disorders associated with systemic auto-inflammation. CAPS result from gain-of-function mutations in NLRP3, which result in formation of an intracellular protein complex known as the NLRP3 inflammasome. This leads to overproduction of IL-1β and other pro-inflammatory signals, resulting in inflammatory symptoms. Treatments for NLRP3-related diseases are biologic agents that directly target IL-1β. We sought to determine if the orally available small molecule NLRP3 inhibitor MCC950 could inhibit IL-1β ex vivo in a cohort of patients with autoinflammatory disease. Methods: Patients were recruited to donate blood, from which PBMCs were isolated and assayed in the presence of MCC950 to determine inhibitory efficacy. Results: We found that apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC) and mature IL-1β was higher in ex vivo PBMCs from CAPS patients than healthy donors. MCC950 inhibited production of mature IL-1β in PBMC from CAPS patients with a range of mutations and blocked NLRP3 activity in an in vitro mutation reconstitution assay. Similar results were observed with PBMC from two patients with Schnitzler’s Syndrome, another auto-inflammatory disease. Conclusions: The NLRP3 inflammasome inhibitor MCC950 blocked constitutive activation of NLRP3 observed in the PBMCs of CAPS patients. This study highlights the potential utility of NLRP3 inhibition by a small molecule for rare autoinflammatory diseases that are driven by NLRP3.

Distinctive probiotic features share common TLR2-dependent signalling in intestinal epithelial cells

The underlying mechanisms of probiotics and postbiotics are not well understood, but it is known that both affect the adaptive and innate immune responses. In addition, there is a growing concept that some probiotic strains have common core mechanisms that provide certain health benefits. Here, we aimed to elucidate the signalization of the probiotic bacterial strains Lactobacillus paragasseri K7, Limosilactobacillus fermentum L930BB, Bifidobacterium animalis subsp. animalis IM386 and Lactiplantibacillus plantarum WCFS1. We showed in in vitro experiments that the tested probiotics exhibit common TLR2- and TLR10-dependent downstream signalling cascades involving inhibition of NF-κB signal transduction. Under inflammatory conditions, the probiotics activated phosphatidylinositol 3-kinase (PI3K)/Akt anti-apoptotic pathways and protein kinase C (PKC)-dependent pathways, which led to regulation of the actin cytoskeleton and tight junctions. These pathways contribute to the regeneration of the intestinal epithelium and modulation of the mucosal immune system, which, together with the inhibition of canonical TLR signalling, promote general immune tolerance. With this study we identified shared probiotic mechanisms and were the first to pinpoint the role of anti-inflammatory probiotic signalling through TLR10.

Engineering and Rewiring of a Calcium-Dependent Signaling Pathway

An important feature of synthetic biological circuits is their response to physicochemical signals, which enables the external control of cellular processes. Calcium-dependent regulation is an attractive approach for achieving such control, as diverse stimuli induce calcium influx by activating membrane channel receptors. Most calcium-dependent gene circuits use the endogenous nuclear factor of activated T-cells (NFAT) signaling pathway. Here, we employed engineered NFAT transcription factors to induce the potent and robust activation of exogenous gene expression in HEK293T cells. Furthermore, we designed a calcium-dependent transcription factor that does not interfere with NFAT-regulated promoters and potently activates transcription in several mammalian cell types. Additionally, we demonstrate that coupling the circuit to a calcium-selective ion channel resulted in capsaicin- and temperature-controlled gene expression. This engineered calcium-dependent signaling pathway enables tightly controlled regulation of gene expression through different stimuli in mammalian cells and is versatile, adaptable, and useful for a wide range of therapeutic and diagnostic applications.

Abstract 4059: CRISPR-EXO - genetic deletion tool for treating chronic myelogenous leukemia

Chronic myeloid leukemia (CML) is a myeloproliferative neoplastic disease, occurring in 1 to 2 cases per 100.000 adults, which accounts for ~ 15 % of newly diagnosed leukemias in adult patients. The diagnosis is based upon the genetic translocation between the t(9;22)(q34;q11.2), resulting in the formation of Philadelphia fusion chromosome, coding for BCR-ABL1 oncoprotein. The life-long treatment relies on tyrosine kinase inhibitors (TKIs). In nearly in 2 % patients develop point mutations, leading to resistance to TKIs treatment. New solutions for treating cancer with genetic etiology are considered. CRISPR/Cas system, composed of guide RNA, targeting endonuclease Cas9 to specific target genomic region has been used before to mediate breakage of Philadelphia chromosome at the site of oncogenic translocation. We present a strategy to couple Cas9 to the exonuclease to promote large deletions at the cancer-specific target genomic site. Cotransfection with EXOIII exhibited the best increase in deletion formation of all tested exonucleases. To further improve the rate of genetic lesion formation, Cas9 and EXOIII were connected via coiled-coil heterodimer forming peptides, bringing the two enzymes into close proximity (CRISPR-EXO). This resulted in a potent increase of deletion formation compared to the standard CRISPR/Cas, cotransfection and genetic fusion. We performed an animal study for the use of the CRISPR-EXO system as a potential anti-cancer therapeutic tool. In case of the CRISPR-EXO system, we showed a significant increase in cell death due to higher genome editing in the BCR-ABL1 region. These findings were confirmed also in an animal cancer model, where animals with tumors, electroporated with CRISPR-EXO system showed improved survival and drastic reduction in tumor size.CRISPR-EXO upgraded CRISPR system based on tethering Cas9 protein to exonuclease EXOIII by heterodimeric coiled-coil forming peptides, resulted in highly efficient editing of BCR-ABL1 fusion gene, leading to enhanced death of CML cancer cells.

Citation Format: Duško Lainšček, Vida Forstnerič, Špela Malenšek, Mojca Skrbinek, Matjaž Sever, Roman Jerala. CRISPR-EXO - genetic deletion tool for treating chronic myelogenous leukemia [abstract]. In: Proceedings of the Annual Meeting of the American Association for Cancer Research 2020; 2020 Apr 27-28 and Jun 22-24. Philadelphia (PA): AACR; Cancer Res 2020;80(16 Suppl):Abstract nr 4059.

Adamantane Containing Peptidoglycan Fragments Enhance RANTES and IL-6 Production in Lipopolysaccharide-Induced Macrophages

We report the enhancement of the lipopolysaccharide-induced immune response by adamantane containing peptidoglycan fragments in vitro. The immune stimulation was detected by Il-6 (interleukine 6) and RANTES (regulated on activation, normal T cell expressed and secreted) chemokine expression using cell assays on immortalized mouse bone-marrow derived macrophages. The most active compound was a α-D-mannosyl derivative of an adamantylated tripeptide with L-chirality at the adamantyl group attachment, whereby the mannose moiety assumed to target mannose receptors expressed on macrophage cell surfaces. The immune co-stimulatory effect was also influenced by the configuration of the adamantyl center, revealing the importance of specific molecular recognition event taking place with its receptor. The immunostimulating activities of these compounds were further enhanced upon their incorporation into lipid bilayers, which is likely related to the presence of the adamantyl group that helps anchor the peptidoglycan fragment into lipid nanoparticles. We concluded that the proposed adamantane containing peptidoglycan fragments act as co-stimulatory agents and are also suitable for the preparation of lipid nanoparticle-based delivery of peptidoglycan fragments.

Design of novel protein building modules and modular architectures

Nature uses only a limited number of protein topologies and while several folds have evolved independently over time, there are clearly many possible topologies that have not been explored by evolution. With recent advances of protein design concepts, computational modeling tools, high resolution and high-throughput experimental methods it is now possible to design new protein architectures. The collection of building blocks and design principles widened both in size and complexity, offering an expanded toolset for building new modular folds and functional protein structures. Here we review and discuss recent achievements of protein design, focusing in particular on the use and prospects of modular approaches for assembling new protein folds.

Metabolic enzyme clustering by coiled coils improves the biosynthesis of resveratrol and mevalonate

The clustering of biosynthetic enzymes is used in nature to channel reaction products and increase the yield of compounds produced by multiple reaction steps. The coupling of multiple enzymes has been shown to increase the biosynthetic product yield. Different clustering strategies have particular advantages as the spatial organization of multiple enzymes creates biocatalytic cascades with a higher efficiency of biochemical reaction. However, there are also some drawbacks, such as misfolding and the variable stability of interaction domains, which may differ between particular biosynthetic reactions and the host organism. Here, we compared different protein-based clustering strategies, including direct fusion, fusion mediated by intein, and noncovalent interactions mediated through small coiled-coil dimer-forming domains. The clustering of enzymes through orthogonally designed coiled-coil interaction domains increased the production of resveratrol in Escherichia coli more than the intein-mediated fusion of biosynthetic enzymes. The improvement of resveratrol production correlated with the stability of the coiled-coil dimers. The coiled-coil fusion-based approach also increased mevalonate production in Saccharomyces cerevisiae, thus demonstrating the wider applicability of this strategy.

Increased gene translation stringency in mammalian cells by nonsense suppression at multiple permissive sites with a single noncanonical amino acid

The considerable potential of engineered cells compels the development of strategies for the stringent control of gene expression. A promising approach is the introduction of a premature stop codon (PTC) into a selected gene that is expressed only in the presence of noncanonical amino acids through nonsense suppression. Here, different strategies of amber PTC readthrough in mammalian cells were tested. The use of a tRNA synthetase together with a TAG codon-specific tRNA achieved PTC readthrough depending on the addition of a noncanonical amino acid (4-benzoyl-L-phenylalanine; Bpa). While single TAG codon incorporation exhibited detectable expression of the reporter protein even in the absence of Bpa, the use of a double PTC enabled virtually leakage-free functional gene translation. The introduction of an additional 5'-PTC, therefore, represents a generally applicable strategy to increase stringency in gene translation.

Synthetic biology principles for the design of protein with novel structures and functions

Nature provides a large number of functional proteins that evolved during billions of years of evolution. The diversity of natural proteins encompasses versatile functions and more than a thousand different folds, which, however, represents only a tiny fraction of all possible folds and polypeptide sequences. Recent advances in the rational design of proteins demonstrate that it is possible to design de novo protein folds unseen in nature. Novel protein topologies have been designed based on similar principles as natural proteins using advanced computational modelling or modular construction principles, such as oligomerization domains. Designed proteins exhibit several interesting features such as extreme stability, designability of 3D topologies and folding pathways. Moreover, designed protein assemblies can implement symmetry similar to the viral capsids, while, on the other hand, single-chain pseudosymmetric designs can address each position independently. Recently, the design is expanding towards the introduction of new functions into designed proteins, and we may soon be able to design molecular machines.

Targeted Delivery of Adamantylated Peptidoglycan Immunomodulators in Lipid Nanocarriers: NMR Shows That Cargo Fragments Are Available on the Surface

We present an in-depth investigation of the membrane interactions of peptidoglycan (PGN)-based immune adjuvants designed for lipid-based delivery systems using NMR spectroscopy. The derivatives contain a cargo peptidoglycan (PGN) dipeptide fragment and an adamantyl group, which serves as an anchor to the lipid bilayer. Furthermore, derivatives with a mannose group that can actively target cell surface receptors on immune cells are also studied. We showed that the targeting mannose group and the cargo PGN fragment are both available on the lipid bilayer surface, thereby enabling interactions with cognate receptors. We found that the nonmannosylated compounds are incorporated stronger into the lipid assemblies than the mannosylated ones, but the latter compounds penetrate deeper in the bilayer. This might be explained by stronger electrostatic interactions available for zwitterionic nonmannosylated derivatives as opposed to the compounds in which the charged N-terminus is capped by mannose groups. The higher incorporation efficiency of the nonmannosylated compounds correlated with a larger relative enhancement in immune stimulation activities upon lipid incorporation compared to that of the derivatives with the mannose group. The chirality of the adamantyl group also influenced the incorporation efficiency, which in turn correlated with membrane-associated conformations that affect possible intermolecular interactions with lipid molecules. These findings will help in improving the development of PGN-based immune adjuvants suitable for delivery in lipid nanoparticles.

A genome-wide CRISPR/Cas9 screen identifies novel regulators of GSDMD pore formation in engineered macrophages

Cleavage of gasdermin D (GSDMD) by inflammatory caspases results in pore formation at the plasma membrane. GSDMD pores are recognized to mediate pyroptotic lysis of the cell or direct translocation of IL-1 family cytokines from the cytosol into the extracellular space depending on the quantity of pores or duration of plasma membrane occupancy. Hyperactive cells display evidence of fewer GSDMD pores compared to their pyroptotic counterparts, and recent work suggests that ESCRT-dependent membrane repair pathways oppose the cell fate towards pyroptosis through removal of GSDMD pores from the plasma membrane. To identify regulators of GSDMD pore formation at the plasma membrane, we utilized a genome-wide CRISPR/Cas9 screening platform in immortalized bone marrow derived macrophages (iBMDMs). This screen uncovered novel regulators of GSDMD pore formation in the plasma membrane.

CRISPRa-mediated FOXP3 gene upregulation in mammalian cells

BACKGROUND

Forkhead box P3+ (FOXP3 +) regulatory T cells (Tregs) are a subset of lymphocytes, critical for the maintenance of immune homeostasis. Loss-of-function mutations of the FOXP3 gene in animal models and humans results in loss of differentiation potential into Treg cells and are responsible for several immune-mediated inflammatory diseases. Strategies of increasing FOXP3 expression represent a potential approach to increase the pool of Tregs within the lymphocyte population and may be employed in therapies of diverse autoimmune conditions. In the present study, a dCas9 CRISPR-based method was systematically employed to achieve upregulation and sustained high expression of endogenous FOXP3 in HEK293 and human Jurkat T cell lines through targeting of the core promotor, three known regulatory regions of the FOXP3 gene (CNS1-3), and two additional regions selected through extensive bioinformatics analysis (Cage1 and Cage2).

RESULTS

Using an activator-domain fusion based dCas9 transcription activator, robust upregulation of FOXP3 was achieved, and an optimal combination of single guide RNAs was selected, which exerted an additive effect on FOXP3 gene upregulation. Simultaneous targeting of FOXP3 and EOS, a transcription factor known to act in concert with FOXP3 in initiating a Treg phenotype, resulted in upregulation of FOXP3 downstream genes CD25 and TNFR2. When compared to ectopic expression of FOXP3 via plasmid electroporation, upregulation of endogenous FOXP3 via the Cas9-based method resulted in prolonged expression of FOXP3 in Jurkat cells.

CONCLUSIONS

Transfection of both HEK293 and Jurkat cells with dCas9-activators showed that regulatory regions downstream and upstream of FOXP3 promoter can be very potent transcription inducers in comparison to targeting the core promoter. While introduction of genes by conventional methods of gene therapy may involve a risk of insertional mutagenesis due to viral integration into the genome, transient up- or down-regulation of transcription by a CRISPR-dCas9 approach may resolve this safety concern. dCas9-based systems provide great promise in DNA footprint-free phenotype perturbations (perturbation without the risk of DNA damage) to drive development of transcription modulation-based therapies.

Synthetic Biology for Multiscale Designed Biomimetic Assemblies: From Designed Self-Assembling Biopolymers to Bacterial Bioprinting

Nature is based on complex self-assembling systems that span from the nanoscale to the macroscale. We have already begun to design biomimetic systems with properties that have not evolved in nature, based on designed molecular interactions and regulation of biological systems. Synthetic biology is based on the principle of modularity, repurposing diverse building modules to design new types of molecular and cellular assemblies. While we are currently able to use techniques from synthetic biology to design self-assembling molecules and re-engineer functional cells, we still need to use guided assembly to construct biological assemblies at the macroscale. We review the recent strategies for designing biological systems ranging from molecular assemblies based on self-assembly of (poly)peptides to the guided assembly of patterned bacteria, spanning 7 orders of magnitude.