Internal Nanoparticle Structure of Temperature-Responsive Self-Assembled PNIPAM-b-PEG-b-PNIPAM Triblock Copolymers in Aqueous Solutions: NMR, SANS, and Light Scattering Studies

In this study, we report detailed information on the internal structure of PNIPAM-b-PEG-b-PNIPAM nanoparticles formed from self-assembly in aqueous solutions upon increase in temperature. NMR spectroscopy, light scattering, and small-angle neutron scattering (SANS) were used to monitor different stages of nanoparticle formation as a function of temperature, providing insight into the fundamental processes involved. The presence of PEG in a copolymer structure significantly affects the formation of nanoparticles, making their transition to occur over a broader temperature range. The crucial parameter that controls the transition is the ratio of PEG/PNIPAM. For pure PNIPAM, the transition is sharp; the higher the PEG/PNIPAM ratio results in a broader transition. This behavior is explained by different mechanisms of PNIPAM block incorporation during nanoparticle formation at different PEG/PNIPAM ratios. Contrast variation experiments using SANS show that the structure of nanoparticles above cloud point temperatures for PNIPAM-b-PEG-b-PNIPAM copolymers is drastically different from the structure of PNIPAM mesoglobules. In contrast with pure PNIPAM mesoglobules, where solidlike particles and chain network with a mesh size of 1-3 nm are present, nanoparticles formed from PNIPAM-b-PEG-b-PNIPAM copolymers have nonuniform structure with "frozen" areas interconnected by single chains in Gaussian conformation. SANS data with deuterated "invisible" PEG blocks imply that PEG is uniformly distributed inside of a nanoparticle. It is kinetically flexible PEG blocks which affect the nanoparticle formation by prevention of PNIPAM microphase separation.

Shape Modification of Water-in-CO2 Microemulsion Droplets through Mixing of Hydrocarbon and Fluorocarbon Amphiphiles

An oxygen-rich hydrocarbon (HC) amphiphile has been developed as an additive for supercritical CO2 (scCO2). The effects of this custom-designed amphiphile have been studied in water-in-CO2 (w/c) microemulsions stabilized by analogous fluorocarbon (FC) surfactants, nFG(EO)2, which are known to form spherical w/c microemulsion droplets. By applying contrast-variation small-angle neutron scattering (CV-SANS), evidence has been obtained for anisotropic structures in the mixed systems. The shape transition is attributed to the hydrocarbon additive, which modifies the curvature of the mixed surfactant films. This can be considered as a potential method to enhance physicochemical properties of scCO2 through elongation of w/c microemulsion droplets. More importantly, by studying self-assembly in these mixed systems, fundamental understanding can be developed on the packing of HC and FC amphiphiles at water/CO2 interfaces. This provides guidelines for the design of fluorine-free CO2 active surfactants, and therefore, practical industrial scale applications of scCO2 could be achieved.

Sulfosuccinate and Sulfocarballylate Surfactants As Charge Control Additives in Nonpolar Solvents

A series of eight sodium sulfonic acid surfactants with differently branched tails (four double-chain sulfosuccinates and four triple-chain sulfocarballylates) were studied as charging agents for sterically stabilized poly(methyl methacrylate) (PMMA) latexes in dodecane. Tail branching was found to have no significant effect on the electrophoretic mobility of the latexes, but the number of tails was found to influence the electrophoretic mobility. Triple-chain, sulfocarballylate surfactants were found to be more effective. Several possible origins of this observation were explored by comparing sodium dioctylsulfosuccinate (AOT1) and sodium trioctylsulfocarballylate (TC1) using identical approaches: the inverse micelle size, the propensity for ion dissociation, the electrical conductivity, the electrokinetic or ζ potential, and contrast-variation small-angle neutron scattering. The most likely origin of the increased ability of TC1 to charge PMMA latexes is a larger number of inverse micelles. These experiments demonstrate a small molecular variation that can be made to influence the ability of surfactants to charge particles in nonpolar solvents, and modifying molecular structure is a promising approach to developing more effective charging agents.

Pd- 3 -C6H9 complexes of the Trost modular ligand: high nuclearity columnar aggregation controlled by concentration, solvent and counterion

Under optimised conditions, the Trost modular ligand (TML) series induces high levels of asymmetric induction in an extraordinarily wide range of reactions involving palladium π-allyl intermediates. Prior mechanistic investigations into reactions involving Pd-η3-C6H9 intermediates have focussed on the monomeric 13-membered ring formed via P,P-chelation of the ligand to Pd. However, it is also recognised that ring-opening oligomerisation provides a pool of high nuclearity Pd-η3-C6H9 species that, by affording a low level, or even the opposite sense, of asymmetric induction relative to the mononuclear species, are responsible for a reduction in selectivity under non-optimised conditions. Herein we describe an investigation by NMR spectroscopy, molecular mechanics, molecular dynamics, and small-angle neutron scattering (SANS), of a Pd-η3-C6H9 cation bearing the 1,2-diaminocyclohexane TML ligand (2). Using both nondeuterated and perdeuterated (D47) isotopologues of the resulting complexes ([1]+), we show that a two-stage oligomerisation-aggregation process forms self assembled cylindrical aggregates of very high nuclearity (up to 56 Pd centres). We also investigate how concentration, solvent and counter-anion all modulate the extent of oligomerisation.

Neutron Scattering Studies of the Effects of Formulating Amphotericin B with Cholesteryl Sulfate on the Drug's Interactions with Phospholipid and Phospholipid-Sterol Membranes

Langmuir surface pressure, small-angle neutron scattering (SANS), and neutron reflectivity (NR) studies have been performed to determine how formulation of the antifungal drug amphotericin B (AmB), with sodium cholesteryl sulfate (SCS)-as in Amphotec-affects its interactions with ergosterol-containing (model fungal cell) and cholesterol-containing (model mammalian cell) membranes. The effects of mixing AmB in 1:1 molar ratio with cholesteryl sulfate (yielding AmB-SCS micelles) are compared against those of free AmB, using monolayers and bilayers formed from palmitoyloleoylphosphatidylcholine (POPC) in the absence and presence of 30 mol % ergosterol or cholesterol, in all cases employing a 1:0.05 molar ratio of lipid:AmB. Analyses of the (bilayer) SANS and (monolayer) NR data indicate that the equilibrium changes in membrane structure induced in sterol-free and sterol-containing membranes are the same for free AmB and AmB-SCS. Stopped-flow SANS experiments, however, reveal that the structural changes to vesicle membranes occur far more rapidly following exposure to AmB-SCS vs free drug, with the kinetics of these changes varying with membrane composition. With POPC vesicles, the structural changes induced by AmB-SCS become apparent only after several minutes, and equilibrium is reached after ∼30 min. The corresponding onset of changes in POPC-ergosterol and POPC-cholesterol vesicles, however, occurs within ∼5 s, with equilibrium reached after 10 and 120 s, respectively. The rate of insertion of AmB into POPC-sterol membranes is thus increased through formulation as AmB-SCS. Moreover, the differences in monolayer surface pressure and SANS structure-change equilibration times suggest significant rearrangement of AmB within these membranes following insertion. The reduced times to equilibrium for the POPC-ergosterol vs POPC-cholesterol systems are consistent with the known differences in affinity of AmB for these two sterols, and the reduced time to equilibrium for AmB-SCS interaction with POPC-ergosterol membranes vs that for free AmB is consistent with the reduced host toxicity of Amphotec.

Effect of Fluorocarbon and Hydrocarbon Chain Lengths in Hybrid Surfactants for Supercritical CO2

Hybrid surfactants containing both fluorocarbon (FC) and hydrocarbon (HC) chains have recently been shown to solubilize water and form elongated reversed micelles in supercritical CO2. To clarify the most effective FC and HC chain lengths, the aggregation behavior and interfacial properties of hybrid surfactants FCm-HCn (FC length m/HC length n = 4/2, 4/4, 6/2, 6/4, 6/5, 6/6, and 6/8) were examined in W/CO2 mixtures as functions of pressure, temperature, and water-to-surfactant molar ratio (W0). The solubilizing power of hybrid surfactants for W/CO2 microemulsions was strongly affected by not only the FC length but also by that of the HC. Although the surfactants having short FC and/or HC tails (namely, m/n = 4/2, 4/4, and 6/2) did not dissolve in supercritical CO2 (even at ∼17 mM, ≤400 bar, temperature ≤ 75 °C, and W0 = 0-40), the other hybrid surfactants were able to yield transparent single-phase W/CO2 mixtures identified as microemulsions. The solubilizing power of FC6-HCm surfactants reached a maximum (W0 ∼ 80 at 45 °C and 350 bar) with a hydrocarbon length, m, of 4. The W0 value of 80 is the highest for a HC-FC hybrid surfactant, matching the highest value reported for a FC surfactant which contained more FC groups. High-pressure small-angle neutron scattering measurements from FCm-HCn/D2O/CO2 microemulsions were consistent with growth of the microemulsion droplets with increasing W0. In addition, not only spherical reversed micelles but also nonspherical assemblies (rodlike or ellipsoidal) were found for the systems with FC6-HCn (n = 4-6). At fixed surfactant concentration and W0 (17 mM and W0 = 20), the longest reversed micelles were obtained for FC6-HC6 where a mean aspect ratio of 6.3 was calculated for the aqueous cores.

Adsorption of F127 onto single-walled carbon nanotubes characterized using small-angle neutron scattering

Aqueous single-walled carbon nanotube dispersions are often made using polymers from the pluronic family of amphiphilic block copolymers; however, relatively few studies have been conducted using small-angle neutron scattering techniques to discover the mechanism by which they act. SANS results reported here show that a relatively simple core-shell cylinder model can be used to fit data successfully at different contrasts. The results across all contrasts showed that the best fit gave an inner nanotube radius of 10 Å, corresponding to small nanotube bundles with a small amount of water present (20%), and a polydisperse adsorbed layer thickness of 61 Å, with a water content of 94% in the adsorbed layer. The data fitting is thus consistent with a small SWCNT bundle surrounded by an extended and water-swollen F127 adsorbed layer. Comparing the scattering from F127/SWCNT at different contrasts, it has been found that the polymer-decorated SWCNTs are contrast matched at a D2O/H2O volume ratio of 0.36:0.64, corresponding to a scattering-length density of 1.92 × 10(-6) Å(-2).

Structure of Sodium Carboxymethyl Cellulose Aqueous Solutions: A SANS and Rheology Study

We report a small angle neutron scattering (SANS) and rheology study of cellulose derivative polyelectrolyte sodium carboxymethyl cellulose with a degree of substitution of 1.2. Using SANS, we establish that this polymer is molecularly dissolved in water with a locally stiff conformation with a stretching parameter. We determine the cross sectional radius of the chain ( 3.4 Å) and the scaling of the correlation length with concentration (ξ = 296 c^−1/2Å for c in g/L) is found to remain unchanged from the semidilute to concentrated crossover as identified by rheology. Viscosity measurements are found to be in qualitative agreement with scaling theory predictions for flexible polyelectrolytes exhibiting semidilute unentangled and entangled regimes, followed by what appears to be a crossover to neutral polymer concentration dependence of viscosity at high concentrations. Yet those higher concentrations, in the concentrated regime defined by rheology, still exhibit a peak in the scattering function that indicates a correlation length that continues to scale as. © 2014 The Authors. Journal of Polymer Science Part B: Polymer Physics Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015, 53, 492–501

Low-surface energy surfactants with branched hydrocarbon architectures

Surface tensiometry and small-angle neutron scattering have been used to characterize a new class of low-surface energy surfactants (LSESs), "hedgehog" surfactants. These surfactants are based on highly branched hydrocarbon (HC) chains as replacements for environmentally hazardous fluorocarbon surfactants and polymers. Tensiometric analyses indicate that a subtle structural modification in the tails and headgroup results in significant effects on limiting surface tensions γcmc at the critical micelle concentration: a higher level of branching and an increased counterion size promote an effective reduction of surface tension to low values for HC surfactants (γcmc ∼ 24 mN m(-1)). These LSESs present a new class of potentially very important materials, which form lamellar aggregates in aqueous solutions independent of dilution.

Interaction between surfactants and colloidal latexes in nonpolar solvents studied using contrast-variation small-angle neutron scattering

The interaction between deuterium-labeled Aerosol OT surfactant (AOT-d34) and sterically stabilized poly(methyl methacrylate) (PMMA) latex particles dispersed in nonpolar solvents has been studied using contrast-variation small-angle neutron scattering (CV-SANS). The electrophoretic mobilities (μ) of the latexes have been measured by phase-analysis light scattering, indicating that μ is negative. Two analogues of the stabilizers for the particles have been studied as free polymers in the absence of PMMA latexes: poly(12-hydroxystearic acid) (PHSA) polyester and poly(methyl methacrylate)-graft-poly(12-hydroxystearic acid) (PMMA-graft-PHSA) stabilizer copolymer. The scattering from both PHSA in dodecane and PMMA-graft-PHSA in toluene is consistent with extended polymer chains in good solvents. In dodecane, PMMA-graft-PHSA forms polymer micelles, and SANS is consistent with ellipsoidal aggregates formed of around 50 polymer chains. CV-SANS measurements were performed by measuring SANS from systems of PHSA, PMMA-graft-PHSA, and PMMA latexes with 10 and 100 mM surfactant solutions of AOT-d34 in both polymer/particle and AOT contrast-matched solvent. No excess scattering above the polymer or surfactant was found for PHSA in dodecane or PMMA-graft-PHSA in dodecane and toluene. This indicates that AOT does not significantly interact with the free polymers. Excess scattering was observed for systems with AOT-d34 and PMMA latexes dispersed in particle contrast-matched dodecane, consistent with the penetration of AOT into the PMMA latexes. This indicates that AOT does not interact preferentially with the stabilizing layers but, rather, is present throughout the colloids. Previous research ( Langmuir 2010, 26, 6967-6976 ) suggests that AOT surfactant is located in the latex PHSA-stabilizer layer, but all the results in this study are consistent with AOT poorly interacting with alkyl-stabilizer polymers.

Shape transitions in supercritical CO2 microemulsions induced by hydrotropes

The ability to induce morphological transitions in water-in-oil (w/o) and water-in-CO2 (w/c) microemulsions stabilized by a trichain anionic surfactant 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate (TC14) with simple hydrotrope additives has been investigated. High-pressure small-angle neutron scattering (SANS) has revealed the addition of a small mole fraction of hydrotrope can yield a significant elongation in the microemulsion water droplets. For w/o systems, the degree of droplet growth was shown to be dependent on the water content, the hydrotrope mole fraction, and chemical structure, whereas for w/c microemulsions a similar, but less significant, effect was seen. The expected CO2 viscosity increase from such systems has been calculated and compared to related literature using fluorocarbon chain surfactants. This represents the first report of hydrotrope-induced morphology changes in w/c microemulsions and is a significant step forward toward the formation of hydrocarbon worm-like micellar assemblies in this industrially relevant solvent.

On the role of specific interactions in the diffusion of nanoparticles in aqueous polymer solutions

Understanding nanoparticle diffusion within non-Newtonian biological and synthetic fluids is essential in designing novel formulations (e.g., nanomedicines for drug delivery, shampoos, lotions, coatings, paints, etc.), but is presently poorly defined. This study reports the diffusion of thiolated and PEGylated silica nanoparticles, characterized by small-angle neutron scattering, in solutions of various water-soluble polymers such as poly(acrylic acid) (PAA), poly(N-vinylpyrrolidone) (PVP), poly(ethylene oxide) (PEO), and hydroxyethylcellulose (HEC) probed using NanoSight nanoparticle tracking analysis. Results show that the diffusivity of nanoparticles is affected by their dimensions, medium viscosity, and, in particular, the specific interactions between nanoparticles and the macromolecules in solution; strong attractive interactions such as hydrogen bonding hamper diffusion. The water-soluble polymers retarded the diffusion of thiolated particles in the order PEO > PVP > PAA > HEC whereas for PEGylated silica particles retardation followed the order PAA > PVP = HEC > PEO. In the absence of specific interactions with the medium, PEGylated nanoparticles exhibit enhanced mobility compared to their thiolated counterparts despite some increase in their dimensions.

The structures of salicylate surfactants with long alkyl chains in non-aqueous media

The self-assembled structures formed by alkyl salicylate surfactants, as a function of metal headgroup counterion, in dodecane and toluene have been investigated. Results from optical microscopy are combined with small angle neutron scattering to show that moisture in the organic phase can have a dramatic effect on the observed structures. A simple acidic cation produces a cluster of surfactant chains irrespective of the oil type or presence of water. However, systems with an alkali metal counterion (potassium or sodium) result in cylindrical micelles in dry dodecane changing to lamellar structures in the wet case and fuzzy spheres in dry toluene changing to bidisperse emulsions with the presence of water. However, if magnesium or calcium counterions are used, this leads to different structures, depending on the oil type and the presence of moisture.

Learning about SANS instruments and data reduction from round robin measurements on samples of polystyrene latex

Measurements of a well-characterized `standard' sample can verify the performance of an instrument. Typically, small-angle neutron scattering instruments are used to investigate a wide range of samples and may often be used in a number of configurations. Appropriate `standard' samples are useful to test different aspects of the performance of hardware as well as that of the data reduction and analysis software. Measurements on a number of instruments with different intrinsic characteristics and designs in a round robin can not only better characterize the performance for a wider range of conditions but also, perhaps more importantly, reveal the limits of the current state of the art of small-angle scattering. The exercise, followed by detailed analysis, tests the limits of current understanding as well as uncovering often forgotten assumptions, simplifications and approximations that underpin the current practice of the technique. This paper describes measurements of polystyrene latex, radius 720 Å, with a number of instruments. Scattering from monodisperse, uniform spherical particles is simple to calculate and displays sharp minima. Such data test the calibrations of intensity, wavelength and resolution as well as the detector response. Smoothing due to resolution, multiple scattering and polydispersity has been determined. Sources of uncertainty are often related to systematic deviations and calibrations rather than random counting errors. The study has prompted development of software to treat modest multiple scattering and to better model the instrument resolution. These measurements also allow checks of data reduction algorithms and have identified how they can be improved. The reproducibility and the reliability of instruments and the accuracy of parameters derived from the data are described.

Aggregation properties of p-phenylene vinylene based conjugated oligoelectrolytes with surfactants

The amphiphilic properties of conjugated oligoelectrolytes (COE) and their sensitivity to the polarity of their microenvironment lead to interesting aggregation behavior, in particular in their interaction with surfactants. Photoluminescence (PL) spectroscopy, liquid-phase atomic force microscopy, small-angle neutron scattering, small-angle X-ray scattering, and grazing-incidence X-ray diffraction were used to examine interactions between cationic p-phenylene vinylene based oligoelectrolytes and surfactants. These techniques indicate the formation of COE/surfactant aggregates in aqueous solution, and changes in the photophysical properties are observed when compared to pure aqueous solutions. We evaluate the effect of the charge of the surfactant polar headgroup, the size of the hydrophobic chain, and the role of counterions. At low COE concentrations (micromolar), it was found that these COEs display larger emission quantum efficiencies upon incorporation into micelles, along with marked blue-shifts of the PL spectra. This effect is most pronounced in the series of anionic surfactants, and the degree of blue shifts as a function of surfactant charge is as follows: cationic < nonionic < anionic surfactants. In anionic surfactants, such as sodium dodecyl sulfate (SDS), the PL spectra show vibronic resolution above the critical micelle concentration of the surfactant, suggesting more rigid structures. Scattering data indicate that in aqueous solutions, trimers appear as essentially 3-dimensional particles, while tetra- and pentamers form larger, cylindrical particles. When the molar ratio of nonionic C12E5 surfactant to 1,4-bis(4-{N,N-bis-[(N,N,N-trimethylammonium)hexyl]amino}-styryl)benzene tetraiodide (DSBNI) is close to one, the size of the formed DSBNI-C12E5 particles corresponds to the full coverage of individual oligomers. When these particles are transferred into thin films, they organize into a cubic in-plane pattern. If anionic SDS is added, the formed DSBNI-SDS particles are larger than expected for full surfactant coverage, and particles may thus contain several oligomers. This tendency is attributed to the merging of DSBNI oligomers due to the charge screening and, thus, reduced water solubility.

Nanostructures in water-in-CO2 microemulsions stabilized by double-chain fluorocarbon solubilizers

High-pressure small-angle neutron scattering (HP-SANS) studies were conducted to investigate nanostructures and interfacial properties of water-in-supercritical CO2 (W/CO2) microemulsions with double-fluorocarbon-tail anionic surfactants, having different fluorocarbon chain lengths and linking groups (glutarate or succinate). At constant pressure and temperature, the microemulsion aqueous cores were found to swell with an increase in water-to-surfactant ratio, W0, until their solubilizing capacities were reached. Surfactants with fluorocarbon chain lengths of n = 4, 6, and 8 formed spherical reversed micelles in supercritical CO2 even at W0 over the solubilizing powers as determined by phase behavior studies, suggesting formation of Winsor-IV W/CO2 microemulsions and then Winsor-II W/CO2 microemulsions. On the other hand, a short C2 chain fluorocarbon surfactant analogue displayed a transition from Winsor-IV microemulsions to lamellar liquid crystals at W0 = 25. Critical packing parameters and aggregation numbers were calculated by using area per headgroup, shell thickness, the core/shell radii determined from SANS data analysis: these parameters were used to help understand differences in aggregation behavior and solubilizing power in CO2. Increasing the microemulsion water loading led the critical packing parameter to decrease to ~1.3 and the aggregation number to increase to >90. Although these parameters were comparable between glutarate and succinate surfactants with the same fluorocarbon chain, decreasing the fluorocarbon chain length n reduced the critical packing parameter. At the same time, reducing chain length to 2 reduced negative interfacial curvature, favoring planar structures, as demonstrated by generation of lamellar liquid crystal phases.

Evidence for a critical micelle concentration of surfactants in hydrocarbon solvents

The concentration-dependent aggregation of two surfactants, anionic sodium dioctylsulfosuccinate (Aerosol OT or AOT) and nonionic pentaethylene glycol monododecyl ether (C12E5), has been studied in cyclohexane-D12 using small-angle neutron scattering (SANS). A clear monomer-to-aggregate transition has been observed for both surfactants, spherical inverse micelles for AOT and hank-like micelles for C12E5. This suggests that a critical micelle concentration exists for surfactants of these kinds in nonpolar solvents. The nature of the transition is different for the two surfactants. AOT aggregates are the same size and shape with decreasing concentration until a sharp critical micelle concentration, after which they cannot be detected. However, C12E5 aggregates gradually decrease in size. These differences demonstrate that the strength of the solvophobic effect can influence the formation of surfactant aggregates in nonaqueous solvents.

Adsorption of polymer-surfactant mixtures at the oil-water interface

Small-angle neutron scattering, zeta potential measurements, and dynamic light scattering have been used to investigate the adsorption of polymer-surfactant mixtures at the oil-water interface. The water-hexadecane interface investigated was in the form of small oil-in-water emulsion droplets stabilized by the anionic surfactant sodium dodecyl sulfate, SDS. The impact of the addition of two different cationic polymers, poly(ethyleneimine), PEI, and poly(dimethyldiallylammonium chloride), polydmdaac, on the SDS adsorption at the oil-water interface was studied. For both polymers, the addition of the polymer enhances the SDS adsorption at low SDS concentrations at the oil-water interface due to a strong surface polyelectrolyte-surfactant interaction and complexation, but the effects are not as pronounced as at the air-water interface. For PEI/SDS, the adsorption was largely independent of solution pH and increasing PEI concentration. In marked contrast to the adsorption at the air-water interface, only monolayer adsorption and no multilayer adsorption was observed. For the SDS-polydmdaac mixture, the enhanced SDS adsorption was in the form of a monolayer, and the adsorption increased with increasing polymer concentration. The strong SDS/polydmdaac surface interaction resulted in regions of emulsion instability. The zeta potential measurements showed that the combination of SDS and polydmdaac at the interface resulted in charge reversal at the interface. This correlates with the regions of emulsion stability at both high and low polymer concentrations, such that the instabilities arise in the regions of low or zero surface charge. The results presented and their interpretation represent a development in the understanding of polymer-surfactant adsorption at the oil-water interface.

Effects of structure variation on solution properties of hydrotropes: phenyl versus cyclohexyl chain tips

The physicochemical behavior of the phenyl-n-alkanoate (PhenCx) and cyclohexyl-n-alkanoate (CyclohexCx) series has been investigated, supporting previous work on the understanding of hydrotropes (Hopkins Hatzopoulos, M.; Eastoe, J.; Dowding, P.J.; Rogers, S. E.; Heenan, R.; Dyer, R. Langmuir2011, 27, 12346-12353). Electrical conductivity, surface tension, (1)H NMR, and small-angle neutron scattering (SANS) were used to study adsorption and aggregation in terms of critical aggregation concentration (cac). The PhenCx series exhibited very similar d log(cac)/dn to n-alkylbenzoates (CnBenz), exhibiting two branches of behavior, with a common inflection point at four linear carbons, whereas the CyclohexCx series showed no break point. Electrical conductivity and (1)H NMR concentration scans indicate a difference in physicochemical behavior between higher and lower homologues in both the PhenCx and CyclohexCx series. Surface tension measurements with compounds belonging to either group gave typical Gibbs adsorption profiles, having d log(cac)/dn curves consistent with limiting headgroup areas in the region of (35-55 Å(2)) indicating monolayer formation. SANS profiles showed no evidence for aggregates below the electrical conductivity determined cac values, inferring an "on-off" mode of aggregation. Analyses of SANS profiles was consistent with charged ellipsoidal aggregates, persisting from lower through to higher homologues in both the PhenCx and CyclohexCx series.

Hybrid CO2-philic surfactants with low fluorine content

The relationships between molecular architecture, aggregation, and interfacial activity of a new class of CO(2)-philic hybrid surfactants are investigated. The new hybrid surfactant CF2/AOT4 [sodium (4H,4H,5H,5H,5H-pentafluoropentyl-3,5,5-trimethyl-1-hexyl)-2-sulfosuccinate] was synthesized, having one hydrocarbon chain and one separate fluorocarbon chain. This hybrid H-F chain structure strikes a fine balance of properties, on one hand minimizing the fluorine content, while on the other maintaining a sufficient level of CO(2)-philicity. The surfactant has been investigated by a range of techniques including high-pressure phase behavior, UV-visible spectroscopy, small-angle neutron scattering (SANS), and air-water (a/w) surface tension measurements. The results advance the understanding of structure-function relationships for generating CO(2)-philic surfactants and are therefore beneficial for expanding applications of CO(2) to realize its potential using the most economic and efficient surfactants.

Are hydrotropes distinct from surfactants?

The physicochemical properties of a homologous series of sodium p-n-alkylbenzoates have been investigated. The objective was to determine whether there is a clear transition point from hydrotropic to surfactant-like behavior with increasing alkyl chain length n, so as to shed clear light on the aggregation mechanism of so-called "hydrotropes". Electrical conductivity measurements were used for a first estimation of the critical aggregation concentrations (cac). As for classical surfactants, log(cac) depends on alkyl chain length n, but two branches of behavior were observed: one having a gradient typical of long chain fatty acid salts and the other with a more shallow dependence. Surface tension (γ) measurements of high purity aqueous solutions were used to generate limiting headgroup areas A(cac), which were in the range (40-50 Å(2)) being consistent with monolayer formation. Small-angle neutron scattering conclusively shows that the lower chain length homologues (classed as hydrotropes) exhibit sharp transitions in aggregation as a function of bulk concentration, typical of regular surfactants. As such, there is little to suggest from this study that hydrotropes differ in association behavior from regular surfactants.

Low fluorine content CO2-philic surfactants

The article addresses an important, and still unresolved question in the field of CO(2) science and technology: what is the minimum fluorine content necessary to obtain a CO(2)-philic surfactant? A previous publication (Langmuir 2002, 18, 3014) suggested there should be an ideal fluorination level: for optimization of possible process applications in CO(2), it is important to establish just how little F is needed to render a surfactant CO(2)-philic. Here, optimum chemical structures for water-in-CO(2) (w/c) microemulsion stabilization are identified through a systematic study of CO(2)-philic surfactant design based on dichain sulfosuccinates. High pressure small-angle neutron scattering (HP-SANS) measurements of reversed micelle formation in CO(2) show a clear relationship between F content and CO(2) compatibility of any given surfactant. Interestingly, high F content surfactants, having lower limiting aqueous surface tensions, γ(cmc), also have better performance in CO(2), as indicated by lower cloud point pressures, P(trans). The results have important implications for the rational design of CO(2)-philic surfactants helping to identify the most economic and efficient compounds for emerging CO(2) based fluid technologies.

Photoreactive surfactants: a facile and clean route to oxide and metal nanoparticles in reverse micelles

A new class of photoreactive surfactants (PRSs) is presented here, consisting of amphiphiles that can also act as reagents in photochemical reactions. An example PRS is cobalt 2-ethylhexanoate (Co(EH)(2)), which forms reverse micelles (RMs) in a hydrocarbon solvent, as well as mixed reversed micelles with the standard surfactant Aerosol-OT (AOT). Small-angle neutron scattering (SANS) data show that mixed AOT/PRS RMs have a spherical structure and size similar to that of pure AOT micelles. Excitation of the ligand-to-metal charge transfer (LMCT) band in the PRSs promotes electron transfer from PRS to associated metal counterions, leading to the generation of metal and metal-oxide nanoparticles inside the RMs. This work presents proof of concept for employing PRSs as precursors to obtain nearly monodisperse inorganic nanoparticles: here both Co(3)O(4) and Bi nanoparticles have been synthesized at high metal concentration (10(-2) M) by simply irradiating the RMs. These results point toward a new approach of photoreactive self-assembly, which represents a clean and straightforward route to the generation of nanomaterials.

Structural studies of the monolayers and bilayers formed by a novel cholesterol-phospholipid chimera

Langmuir isotherm, neutron reflectivity, and small angle neutron scattering studies have been conducted to characterize the monolayers and vesicular bilayers formed by a novel chimeric phospholipid, ChemPPC, that incorporates a cholesteryl moeity and a C-16 aliphatic chain, each covalently linked via a glycerol backbone to phosphatidylcholine. The structures of the ChemPPC monolayers and bilayers are compared against those formed from pure dipalmitoylphoshatidylcholine (DPPC) and those formed from a 60:40 mol % mixture of DPPC and cholesterol. In accord with previous findings showing that very similar macroscopic properties were exhibited by ChemPPC and 60:40 mol % DPPC/cholesterol vesicles, it is found here that the chimeric lipid and lipid/sterol mixture have very similar monolayer structures (each having a monolayer thickness of ∼26 Å), and they also form vesicles with similar lamellar structure, each having a bilayer thickness of ∼50 Å and exhibiting a repeat spacing of ∼65 Å. The interfacial area of ChemPPC, however, is around 10 Å(2) greater than that of the combined DPPC/cholesterol unit in the mixed lipid monolayer (viz., 57 ± 1 vs 46 ± 1 Å(2), at 35 mN·m(-1)), and this difference in area is attributed to the succinyl linkage which joins the ChemPPC steroid and glyceryl moieties. The larger area of the ChemPPC is reflected in a slightly thicker monolayer solvent distribution width (9.5 vs 9 Å for the DPPC/cholesterol system) and by a marginal increase in the level of lipid headgroup hydration (16 vs 13 H(2)O per lipid, at 35 mN·m(-1)).

Super-efficient surfactant for stabilizing water-in-carbon dioxide microemulsions

The fluorinated double-tailed glutarate anionic surfactant, sodium 1,5-bis[(1H,1H,2H,2H-perfluorodecyl)oxy]-1,5-dioxopentane-2-sulfonate (8FG(EO)(2)), was found to stabilize water-in-supercritical CO(2) microemulsions with high water-to-surfactant molar ratios (W(0)). Studies were carried out here to obtain detailed information on the phase stability and nanostructure of the microemulsions by using a high-pressure UV-vis dye probe and small-angle neutron scattering (SANS) measurements. The UV-vis spectra, with methyl orange as a reporter dye, indicated a maximum attainable W(0) of 60 at 45 and 75 °C, and SANS profiles indicated regular droplet swelling with a linear relationship between the water core nanodroplet radius and W(0). This represents the highest water solubilization reported to date for any water-in-CO(2) microemulsion. Further analysis of the SANS data indicated critical packing parameters for 8FG(EO)(2) at the microemulsion interface >1.34, representing approximately 1.1 times the value for common aerosol-OT in water-in-heptane microemulsions under equivalent conditions.

Puroindoline-a, a lipid binding protein from common wheat, spontaneously forms prolate protein micelles in solution

The self-assembly in solution of puroindoline-a (Pin-a), an amphiphilic lipid binding protein from common wheat, was investigated by small angle neutron scattering, dynamic light scattering and size exclusion chromatography. Pin-a was found to form monodisperse prolate ellipsoidal micelles with a major axial radius of 112 ± 4.5 Å and minor axial radius of 40.4 ± 0.18 Å. These protein micelles were formed by the spontaneous self-assembly of 38 Pin-a molecules in solution and were stable over a wide pH range (3.5-11) and at elevated temperatures (20-65 °C). Pin-a micelles could be disrupted upon addition of the non-ionic surfactant dodecyl-β-maltoside, suggesting that the protein self-assembly is driven by hydrophobic forces, consisting of intermolecular interactions between Trp residues located within a well-defined Trp-rich domain of Pin-a.

Universal surfactant for water, oils, and CO2

A trichain anionic surfactant sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate (TC14) is shown to aggregate in three different types of solvent: water, heptane, and liquid CO(2). Small-angle neutron scattering (SANS) has been used to characterize the surfactant aggregates in water, heptane, and dense CO(2). Surface tension measurements, and analyses, show that the addition of a third branched chain to the surfactant structural template is critical for sufficiently lowering the surface energy, tipping the balance between a CO(2)-incompatible surfactant (AOT) and CO(2)-philic compounds that will aggregate to form micelles in dense CO(2) (TC14). These results highlight TC14 as one of the most adaptable and useful surfactants discovered to date, being compatible with a wide range of solvent types from high dielectric polar solvent water to alkanes with low dielectrics and even being active in the uncooperative and challenging solvent environment of liquid CO(2).

Automated high pressure cell for pressure jump x-ray diffraction

A high pressure cell for small and wide-angle x-ray diffraction measurements of soft condensed matter samples has been developed, incorporating a fully automated pressure generating network. The system allows both static and pressure jump measurements in the range of 0.1-500 MPa. Pressure jumps can be performed as quickly as 5 ms, both with increasing and decreasing pressures. Pressure is generated by a motorized high pressure pump, and the system is controlled remotely via a graphical user interface to allow operation by a broad user base, many of whom may have little previous experience of high pressure technology. Samples are loaded through a dedicated port allowing the x-ray windows to remain in place throughout an experiment; this facilitates accurate subtraction of background scattering. The system has been designed specifically for use at beamline I22 at the Diamond Light Source, United Kingdom, and has been fully integrated with the I22 beamline control systems.

Hydrocarbon metallosurfactants for CO2

Cobalt and nickel salts of the highly branched trichain anionic surfactant sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate (TC14) are shown to be soluble in dense CO(2) at concentrations up to 6 wt % at 500 bar pressure. This is a remarkably high solubility for such hydrocarbon transition metal surfactants in CO(2). High-pressure small-angle neutron scattering (HP-SANS) has been used to study the surfactant aggregates in a normal organic solvent, cyclohexane, dense CO(2), and also mixtures of these two pure solvents. The results show that transition metal TC14 derivatives are viable compounds for incorporating reactive and functional metal ions into CO(2).

Rod-like micelles thicken CO(2)

A new approach to thicken dense liquid CO(2) is described using the principles of self-assembly of custom-made CO(2) compatible fluorinated dichain surfactants. Solutions of surfactants in CO(2) have been investigated by high-pressure phase behavior, small-angle neutron scattering (HP-SANS) and falling cylinder viscosity experiments. The results show that it is possible to control surfactant aggregation to generate long, thin reversed micellar rods in dense CO(2), which at 10 wt % can lead to viscosity enhancements of up to 90% compared to pure CO(2). This represents the first example of CO(2) viscosity modifiers based on anisotropic reversed micelles.

Surfactant aggregation in CO2/heptane solvent mixtures

The effect of improving "solvent quality" of pure liquid CO(2) with a heptane cosolvent on the phase behavior and micellization of commercially available surfactants has been explored using high-pressure small-angle neutron scattering (HP-SANS). The nonionic C(12)E(5) was found to be highly soluble in both pure CO(2) and the solvent blends, but no aggregation was detected by HP-SANS for any of the compositions studied, even up to 12 vol % surfactant. On the other hand, improving CO(2) solvent quality by adding heptane above 30 vol % promoted solubility and aggregate formation with normal sodium bis(ethylhexyl)sulfosuccinate (AOT). The solvent quality index Hildebrand solubility parameter, used to predict surfactant aggregation in pure hydrocarbon solvents (Langmuir, 2008, 24 (21), 12235-12240) has been tested here for CO(2)-heptane mixtures. The results show how solubility and efficiency of AOT, a commercially viable, well-known, and commonly used surfactant, can be boosted in alkane-containing CO(2)-rich fluids compared to pure CO(2) alone.

Fluorosurfactants at structural extremes: adsorption and aggregation

Fluorosurfactants with several structural modifications have been synthesized, and the air/water interface and bulk aggregation properties investigated. The compounds were fluorinated ethylene oxide (EO) nonionics where the number and position of the hydrophilic group(s) has been radically altered to generate linear, bolaform, and Y-shaped analogues. A noticeable structure-interfacial packing relationship was observed via both tensiometric measurements and neutron reflection studies: the limiting molecular areas, a(cmc), and surface excesses, gamma(cmc), are strongly dependent on the number and position of the EO headgroups. Differing bulk aqueous properties were also observed. Small-angle neutron scattering shows an evolution of micelle structure from cylindrical to disk-like aggregates on changing from Y-shaped to bolaform molecular structure.

Evaluating a teen STD prevention Web site

PURPOSE

Teens are at higher risk than other age groups for acquiring sexually transmitted diseases (STDs) because of biological and behavioral risk factors, but they have few STD prevention resources. Little is known about how teens use the Internet to seek this information. A pilot study was conducted to measure audience and information-seeking characteristics of the www.iwannaknow.org Web site.

METHODS

In addition to a formative content analysis and a usability study, an online survey was designed, pilot tested, revised, and launched for three months. This paper briefly describes the first two formative study components, and then focuses on the online survey.

RESULTS

The content analyses and the usability tests were useful for revising the site content and aesthetics and preparing the online survey. Fewer than half of all participants (N=3,489) were between 13 and 17 (n=1,242), the intended site demographic. Most accessed the Internet from home. The most frequent topic of interest was sexual expression, followed by teen sexuality, virginity, relationships, contraception, and then STD information and these varied by age and gender.

CONCLUSIONS

Methods and findings will assist researchers, Web site developers, and health educators to refine these evaluation methods, develop effective Web sites, and tailor STD prevention messages by age group and gender. The Internet is a cost-effective method for educating teens and those who care for or work with teens about STD risks and prevention, however, more research is needed to assess the behavioral effects of online interventions.

Ionic Liquid-in-Oil Microemulsions

Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets.

The Snf1 protein kinase and Sit4 protein phosphatase have opposing functions in regulating TATA-binding protein association with the Saccharomyces cerevisiae INO1 promoter

To identify the mechanisms by which multiple signaling pathways coordinately affect gene expression, we investigated regulation of the S. cerevisiae INO1 gene. Full activation of INO1 transcription occurs in the absence of inositol and requires the Snf1 protein kinase in addition to other signaling molecules and transcription factors. Here, we present evidence that the Sit4 protein phosphatase negatively regulates INO1 transcription. A mutation in SIT4 was uncovered as a suppressor of the inositol auxotrophy of snf1Delta strains. We found that sit4 mutant strains exhibit an Spt(-) phenotype, suggesting a more general role for Sit4 in transcription. In fact, like the gene-specific regulators of INO1 transcription, Opi1, Ino2, and Ino4, both Snf1 and Sit4 regulate binding of TBP to the INO1 promoter, as determined by chromatin immunoprecipitation analysis. Experiments involving double-mutant strains indicate that the negative effect of Sit4 on INO1 transcription is unlikely to occur through dephosphorylation of histone H3 or Opi1. Sit4 is a known component of the target of rapamycin (TOR) signaling pathway, and treatment of cells with rapamycin reduces INO1 activation. However, analysis of rapamycin-treated cells suggests that Sit4 represses INO1 transcription through multiple mechanisms, only one of which may involve inhibition of TOR signaling.

Evaluation of an enzyme-linked immunosorbent assay kit (GTI PakPlus) for the detection of antibodies against human platelet antigens

Twenty-six serum samples from 24 patients were investigated for the presence of platelet-specific antibodies in a partly retrospective (n = 15) and partly prospective (n = 9) study. The sera contained either alloantibodies to human platelet antigens (HPA) (n = 23) or were from clinically suspected cases of fetomaternal alloimmune thrombocytopenia (FMAITP) in which platelet-specific antibodies had not been detected (n = 3). Three techniques were used to detect platelet antibodies: the platelet immunofluorescence test, the monoclonal antibody immobilization of platelet antigens (MAIPA) assay and a commercially available enzyme-linked immunosorbent assay--GTI PakPlus (GTI kit). Two alkaline phosphatase-conjugated antiglobulin reagents provided by the manufacturer were used in the GTI kit: an antihuman IgG/IgA/IgM (IgGAM) conjugate and an antihuman IgG conjugate. The GTI kit with the anti-IgGAM conjugate failed to detect eight antibody specificities in seven sera (anti-HPA-1a [n = 3], anti-HPA-3a [n = 1], anti-HPA-3b [n = 1] and anti-HPA-5b [n = 3]). Greater signal-to-background ratios were achieved in the GTI kit with the anti-IgG conjugate but five antibody specificities (anti-HPA-1a [n = 1], anti-HPA-3a [n = 1], anti-HPA-3b [n = 1], anti-HPA-5b [n = 2]) remained undetectable. All the sera were detected by MAIPA assay and, furthermore, the MAIPA assay achieved the greatest signal-to-background ratio in the majority of sera tested. These findings re-emphasize the value of the MAIPA assay in reference laboratories and illustrate that the GTI kit may either fail to detect or incorrectly identify clinically significant HPA antibodies.

Prestorage white cell reduction in saline-adenine-glucose-mannitol red cells by use of an integral filter: evaluation of storage values and invivo recovery

BACKGROUND

Prestorage white cell (WBC) reduction in blood components may decrease the incidence of adverse reactions and improve component quality. A bottom-and-top system with an integral third-generation WBC-reduction filter has been studied.

STUDY DESIGN AND METHODS

Whole blood was collected from 30 healthy donors: from 20 by using a blood container system with an integral filter and from 10 controls by using a standard blood container system. Ten test units were buffy coat-depleted, stored for 72 hours at 4 degrees C, and then filtered, while an additional 10 test units were buffy coat-depleted and filtered at room temperature within 8 hours of collection. All units were stored at 4 degrees C for 42 days and sampled weekly.

RESULTS

The mean WBC content of the 72-hour, 4 degrees C units was 0.33 x 10(6), that of the room-temperature units was 2.6 x 10(6), and that of the buffy coat-depleted controls was 460 x 10(6) (p < 0.0005). No significant differences were found among lactate, glucose, sodium, potassium, and plasma hemoglobin levels in the three groups. ATP and 2,3 DPG levels were significantly better preserved in control units than in 72-hour, 4 degrees C units (p = 0.016 and p = 0.032, respectively), but not better than in the room-temperature units. Significant differences were observed between pH values in filtered units and both groups of test units (p = 0.016). In biologic terms however, these differences were small. Red cells from an additional eight healthy volunteer donors were processed by an 8-hour room-temperature method and stored for 35 days. Studies in vivo 24-hour recovery of autologous red cells were performed by transfusing a radiolabeled (51Cr plus 131I-albumin) aliquot after 35 days' storage. Good recovery (mean > 80%) was found by both the single- and double-isotope-label methods. Recovery was significantly greater when calculated by the single-isotope method (p = 0.02).

CONCLUSION

The combination of buffy coat removal and filtration in the blood container system with an integral filter achieved effective WBC reduction (> or = 3 log10 reduction from whole blood) without biologically significant detriment to in vitro or in vivo storage values.

Schistosomal lesions in the bovine uterus

Inspection of bovine female genitalia at a major abattoir in north-eastern Zimbabwe showed schistosome-induced granulomas in uterine walls. Thirty-six non-pregnant and 7 pregnant uteri of 3441 examined, had lesions either in the mid-dorsal aspect of the uterine body or in the horns. The reproductive history of the cows was not known but the 7 pregnancies appeared normal. Lesions were most severe in the myometrium and consisted of rings of multinucleated giant cells and macrophages occurring around eggs and masses of eosinophils on the outside. The parasite is presumed to be Schistosoma mattheei.