Simultaneous Measurement of Proton and Lepton Kinematics in Quasielasticlike ν_{μ}-Hydrocarbon Interactions from 2 to 20 GeV

Neutrino charged-current quasielastic-like scattering, a reaction category extensively used in neutrino oscillation measurements, probes nuclear effects that govern neutrino-nucleus interactions. This Letter reports the first measurement of the triple-differential cross section for ν_{μ} quasielastic-like reactions using the hydrocarbon medium of the MINERvA detector exposed to a wideband beam spanning 2≤E_{ν}≤20  GeV. The measurement maps the correlations among transverse and longitudinal muon momenta and summed proton kinetic energies, and compares them to predictions from a state-of-art simulation. Discrepancies are observed that likely reflect shortfalls with modeling of pion and nucleon intranuclear scattering and/or spectator nucleon ejection from struck nuclei. The separate determination of leptonic and hadronic variables can inform experimental approaches to neutrino-energy estimation.

Changes in laboratory value improvement and mortality rates over the course of the pandemic: an international retrospective cohort study of hospitalised patients infected with SARS-CoV-2

OBJECTIVE

To assess changes in international mortality rates and laboratory recovery rates during hospitalisation for patients hospitalised with SARS-CoV-2 between the first wave (1 March to 30 June 2020) and the second wave (1 July 2020 to 31 January 2021) of the COVID-19 pandemic.

DESIGN, SETTING AND PARTICIPANTS

This is a retrospective cohort study of 83 178 hospitalised patients admitted between 7 days before or 14 days after PCR-confirmed SARS-CoV-2 infection within the Consortium for Clinical Characterization of COVID-19 by Electronic Health Record, an international multihealthcare system collaborative of 288 hospitals in the USA and Europe. The laboratory recovery rates and mortality rates over time were compared between the two waves of the pandemic.

PRIMARY AND SECONDARY OUTCOME MEASURES

The primary outcome was all-cause mortality rate within 28 days after hospitalisation stratified by predicted low, medium and high mortality risk at baseline. The secondary outcome was the average rate of change in laboratory values during the first week of hospitalisation.

RESULTS

Baseline Charlson Comorbidity Index and laboratory values at admission were not significantly different between the first and second waves. The improvement in laboratory values over time was faster in the second wave compared with the first. The average C reactive protein rate of change was -4.72 mg/dL vs -4.14 mg/dL per day (p=0.05). The mortality rates within each risk category significantly decreased over time, with the most substantial decrease in the high-risk group (42.3% in March-April 2020 vs 30.8% in November 2020 to January 2021, p<0.001) and a moderate decrease in the intermediate-risk group (21.5% in March-April 2020 vs 14.3% in November 2020 to January 2021, p<0.001).

CONCLUSIONS

Admission profiles of patients hospitalised with SARS-CoV-2 infection did not differ greatly between the first and second waves of the pandemic, but there were notable differences in laboratory improvement rates during hospitalisation. Mortality risks among patients with similar risk profiles decreased over the course of the pandemic. The improvement in laboratory values and mortality risk was consistent across multiple countries.

Poly(3-hydroxybutyrate) biosynthesis under non-sterile conditions: Piperazine as nitrogen substrate control switch

Poly(3-hydroxybutyrate) (PHB), as a kind of bioplastics for sustainable development, can be synthesized by various microorganisms, however, the high cost of its microbial fermentation is a challenge for its large-scale application. In this study, piperazine degrading strain, Paracoccus sp. TOH, was developed as an excellent chassis for open PHB fermentation with piperazine as controlling element. Whole-genome analysis showed that TOH possesses multi-substrate metabolic pathways to synthesize PHB. Next, TOH could achieve a maximum PHB concentration of 2.42 g L^-1, representing a yield of 0.36 g-PHB g^-1-glycerol when C/N ratio was set as 60:1 with 10 g L^-1 glycerol as substrate. Furthermore, TOH could even synthesize 0.39 g-PHB g^-1-glycerol under non-sterile conditions when piperazine was fed with a suitable rate of 1 mg L^-1 h^-1. 16S rRNA gene sequencing analysis showed that microbial contamination could be effectively inhibited through the regulation of piperazine under non-sterile conditions and TOH dominated the microbial community with a relative abundance of 72.3% at the end of the operational period. This study offers an inspired open PHB fermentation system with piperazine as the control switch, which will realize the goal of efficient industrial biotechnology as well as industrial wastewater treatment.

Evaluation of potassium ferrate activated biochar for the simultaneous adsorption of copper and sulfadiazine: Competitive versus synergistic

Combined pollution caused by organic pollutants and heavy metals pose a significant challenge to the adsorption process. In this study, iron-modified biochar (Fe-BC) was prepared by using ferrate (K₂FeO₄) and wheat stalk as the precursors for the adsorption of copper (Cu²⁺) and sulfadiazine (SDZ), especially under combined pollution scenarios. Iron modification not only enlarged the surface area but also loaded iron oxide nanoparticles on biochar surface. Accordingly, Fe-BC exhibited better adsorption capability of Cu²⁺ and SDZ than the pristine biochar (BC). The corresponding maximum adsorption capacities of Fe-BC₇₀₀ were 46.85 mg g^-1 and 45.43 mg g^-1 towards Cu²⁺ and SDZ, respectively. Interestingly, the adsorption was elevated in binary-pollutants system, suggesting a synergistic effect, which was probably attributed to the mutual bridging effects and complexation between Cu²⁺ and SDZ. The loaded iron oxide particles could serve as a physical barrier to separate the adsorptions of Cu²⁺ and SDZ and thus inhibited the competitive adsorption. Meanwhile, theoretical calculation demonstrated that sulfonamide group was the most probable binding site. Columns packed with Fe-BC₇₀₀ showed better performances for Cu²⁺ and SDZ removal in binary system (635.73 BV for Cu²⁺ and 4846.26 BV for SDZ) than in single systems (571.60 BV for Cu²⁺ and 3572.06 BV for SDZ), which was consistent with batch adsorption experiments. These results demonstrated the potential application of Fe-BC₇₀₀ for simultaneous adsorption of Cu²⁺ and SDZ and provided a cost-effective way for the remediation of organic and inorganic pollutants.

Risk factors for residual disease at re-TUR in a large cohort of T1G3 patients

INTRODUCTION AND OBJECTIVES

The goals of transurethral resection of a bladder tumor (TUR) are to completely resect the lesions and to make a correct diagnosis in order to adequately stage the patient. It is well known that the presence of detrusor muscle in the specimen is a prerequisite to minimize the risk of under staging. Persistent disease after resection of bladder tumors is not uncommon and is the reason why the European Guidelines recommended a re-TUR for all T1 tumors. It was recently published that when there is muscle in the specimen, re-TUR does not influence progression or cancer specific survival. We present here the patient and tumor factors that may influence the presence of residual disease at re-TUR.

MATERIAL AND METHODS

In our retrospective cohort of 2451 primary T1G3 patients initially treated with BCG, pathology results for 934 patients (38.1%) who underwent re-TUR are available. 74% had multifocal tumors, 20% of tumors were more than 3 cm in diameter and 26% had concomitant CIS. In this subgroup of patients who underwent re-TUR, there was no residual disease in 267 patients (29%) and residual disease in 667 patients (71%): Ta in 378 (40%) and T1 in 289 (31%) patients. Age, gender, tumor status (primary/recurrent), previous intravesical therapy, tumor size, tumor multi-focality, presence of concomitant CIS, and muscle in the specimen were analyzed in order to evaluate risk factors of residual disease at re-TUR, both in univariate analyses and multivariate logistic regressions.

RESULTS

The following were not risk factors for residual disease: age, gender, tumor status and previous intravesical chemotherapy. The following were univariate risk factors for presence of residual disease: no muscle in TUR, multiple tumors, tumors > 3 cm, and presence of concomitant CIS. Due to the correlation between tumor multi-focality and tumor size, the multivariate model retained either the number of tumors or the tumor diameter (but not both), p < 0.001. The presence of muscle in the specimen was no longer significant, while the presence of CIS only remained significant in the model with tumor size, p < 0.001.

CONCLUSIONS

The most significant factors for a higher risk of residual disease at re-TUR in T1G3 patients are multifocal tumors and tumors more than 3 cm. Patients with concomitant CIS and those without muscle in the specimen also have a higher risk of residual disease.

Ferrous-activated persulfate oxidation of triclosan in soil and groundwater: The roles of natural mineral and organic matter

Contamination of antimicrobial agents such as Triclosan (TCS) in soil and groundwater possess high risk to human health and ecological systems. Present study systematically studied the degradation of TCS in soil and groundwater by Fe²⁺ activated persulfate (Fe²⁺/PS) oxidation process and special attention was paid on revealing the influence of remediation process on soil physicochemical and microbial characteristics. Experimental results demonstrated that TCS was readily degraded in soil upon Fe²⁺/PS oxidation system. Higher Fe²⁺/PS concentration and lower pH value may promote the TCS degradation. Besides added Fe²⁺, the naturally present Fe (III)-O and dissolved Fe from iron containing minerals may also activate PS for TCS degradation. SO₄^•-, HO•, R^• and ¹O₂ were identified to be involved in the reaction system while addition of Fe²⁺-chelating agents, e.g., oxalic acid and ethylene diamine tetraacetic acid (EDTA) may slightly promote the degradation. Low concentration of Cl^- facilitated TCS degradation and high concentration of Cl^- slowed down the degradation. The presence of HCO₃^- may inhibit the degradation. Fe²⁺/PS oxidation process may partly reduce the soil organic matter content and diversely affect the composition of various C functional groups on soil. It also induced the breakdown of large soil aggregates and reduced the soil porosity, especially at macroporosity region. Phospholipid Fatty Acid test indicated that soil microbial community structure has been altered and the actinomycetes, fungi and Gram-negative bacteria decreased largely. The feasibility of remediation of TCS using Fe²⁺/PS oxidation in various natural groundwater samples was evaluated. Finally, five degradation intermediates of TCS by Fe²⁺/PS oxidation in soil were enriched by solid phase extraction and were identified by liquid chromatography-triple quadrupole mass spectrometry for proposing detailed transformation pathways.

Degradation of Atrazine, Simazine and Ametryn in an arable soil using thermal-activated persulfate oxidation process: Optimization, kinetics, and degradation pathway

This study examined the feasibility of applying thermal-activated persulfate (PS) oxidation for remediation of soil co-contaminated with s-triazine herbicides including Atrazine (ATZ), Simazine (SIM) and Ametryn (AME). Homogeneous activation using heating method (50 °C) was selected. Results showed that thermal-activated PS oxidation process may successfully degrade ATZ in soil and degradation efficiency was increased along the arising activation temperature. Higher PS dosages and depressed initial pH were beneficial for degradation while increasing initial ATZ concentration may hamper the degradation. The oxidation process may lead to changes of surface functional groups on soil. The presence of Cl^-, HCO₃^- and H₂PO₄^- at both of low and high concentrations may inhibit the degradation of ATZ. Soil depths may apparently influence the ATZ degradation which followed 0-10 < 10-30 < 30-60 cm mainly depending on the soil organic matter (SOM) contents. Thermal-activated PS may effectively degrade ATZ, SIM and AME under co-contaminated condition and the more favorable of ethyl group towards SO₄^- than isopropyl and methylation groups was detected. Both of SO₄^- and HO were identified to be responsible for degradation. Finally, degradation intermediates of ATZ, SIM and AME were identified by LC-Q-TOF-MS and detailed transformation pathways for three pesticides were proposed, respectively.

Synergistic Adsorption and Oxidation of Ciprofloxacin by Biochar Derived from Metal-Enriched Phytoremediation Plants: Experimental and Computational Insights

Biochar is a promising candidate for the adsorptive removal of organic/inorganic pollutants, yet its role in metal-free catalyzed advanced oxidation processes still remains ambiguous. In this work, five biochar samples (PPBKx, where x represents the pyrolysis temperature) were prepared by using metal-enriched phytoremediation plant residue as the feedstock. Notably, PPBK exhibited a high specific surface area (as high as 1090.7 m² g^-1) and outstanding adsorption capacity toward ciprofloxacin (CIP, as much as 1.51 ± 0.19 mmol g^-1). By introducing peroxymonosulfate (PMS, 5 mM) as the chemical oxidant, over 2 mmol g^-1 CIP was synergistically adsorbed and oxidized within 30 min although PMS itself could not oxidize CIP efficiently, suggesting the formation of reactive oxidative species. Theoretical calculations revealed that PMS anions preferentially adsorbed on the activated C atoms adjacent to the graphitic N dopant, where the carbon matrix served as the electron donor, instead of as an electron mediator. The adsorbed PMS possessed a smaller molecular orbital energy gap, indicating that it was much easier to be activated than free PMS anions. Surface-bound reactive species were elucidated to be the dominant contributor through chemical quenching experiments and electrochemical characterizations. The catalytic activity of PPBK700 could be greatly retained in repeated oxidations because of the stable N species, which serve as the active catalytic sites, while the CIP adsorption was greatly deteriorated because of the diminishing active adsorption sites (carbon matrix edge) caused by the partial oxidation of PMS. This work not only provides a facile and low-cost approach for the synthesis of functional biochar toward environmental remediation but also deepens the understanding of biochar-catalyzed PMS activation and nonradical oxidation.