LncRNA ABHD11-AS1 promotes tumor progression in papillary thyroid carcinoma by regulating EPS15L1/EGFR signaling pathway

OBJECTIVES

lncRNA ABHD11 antisense RNA 1 (ABHD11-AS1) acts as an oncogene involved in papillary thyroid carcinoma (PTC) occurrence and progression. ABHD11-AS1 exerts biologic functions by some miRNAs and proteins to regulate multiple targets. Identification of novel mechanism of ABHD11-AS1 could be helpful in therapeutic targeting for PTC treatment.

METHODS

Differentially expressed lncRNAs were selected from TCGA database. qRT-PCR analysis was applied to examine the expression of ABHD11-AS1 in PTC cell lines and tissues. The relationship of ABHD11-AS1 expression and clinicopathological features was analyzed by Kaplan-Meier analysis. Two PTC cell lines (TPC-1 and KTC-1) were transfected with pcDNA 3.1, pcDNA3.1-ABHD11-AS1, si-NC and si-ABHD11-AS1, respectively, to verify the ABHD11-AS1 oncogene-regulating capacity to promote tumor progression. The cell metastasis and proliferation had been evaluated both in vitro and in vivo.

RESULTS

High expression of ABHD11-AS1 was found in PTC tissues (P < 0.01), which was significantly correlated with lymph node metastasis (P < 0.05). ABHD11-AS1 overexpression noticeably promoted cell proliferation, migration, and invasion capabilities, which were obviously decreased upon ABHD11-AS1 knockdown. ABHD11-AS1 positively regulated EGFR/EPS15L1 pathway, as EGFR, EPS15L1, STAT3, and p-STAT3 were activated.

CONCLUSION

ABHD11-AS1 promotes tumor progression in PTC by regulating EPS15L1/EGFR pathway.

Ultraviolet-sensing metasurface for programmable electromagnetic scattering field manipulation by combining light control with a microwave field

Combining digital information science with metasurface technology is critical for achieving arbitrary electromagnetic wave manipulation. However, there is a scarcity of contemporary scholarly studies on this subject. In this paper, we propose an Ultraviolet (UV) sensing metasurface for programmable electromagnetic scattering field manipulation by combining light control with a microwave field. The active sensing of UV light and the real-time reaction of the scattering are achieved by integrating four UV sensors on the metasurface. On the metasurface, a UV sensor ML8511 and a voltage driver module are coupled to control each row of the Positive-Intrinsic-Negative (PIN) diodes. Due to the light sensing capability of the UV sensor, the on or off state of the PIN diode integrated into the programmable metasurface can be switched efficiently through the change of light. When the incident wave changes, various discrete data are transmitted to the FPGA. Then the FPGA performs the corresponding voltage distribution to control the state of the PIN diode. Finally, different metasurface coding sequences are generated to realize different electromagnetic functions. As a result, the spatial distribution of sensing light by sensors can be used to determine the electromagnetic field and connect sensing optical information with the microwave field. The simulation and measured results show that this design is feasible. This work provides a dimension for electromagnetic waves modulation.

[Cross-sectional study of association between dietary pattern and cognitive performance in people aged 50 and above years in Shanghai]

Objective: To investigate the association between dietary pattern and cognitive performance in local residents aged ≥50 years in Shanghai. Methods: Data were obtained from the second round of Study of Global Ageing and Adult Health (SAGE) survey in Shanghai. Dietary patterns were surveyed by factor analysis. Cognitive tests were conducted to assess subjects' cognitive performance, including verbal recall, verbal fluency and digit test. Multiple linear regression analysis was used to evaluate the relationship between dietary patterns and cognition performance. Results: A total of 4 132 subjects with complete dietary and cognitive performance test data were included. Factor analysis was used to obtain three dietary patterns: including plant-based pattern, high animal-food pattern, high salt-oil pattern. After controlling for gender, age, education level and other factors, it was found that plant-based pattern (β=0.26,95%CI: 0.17-0.36) and high animal-food pattern (β=0.18, 95%CI:0.06-0.29) were positively associated with total cognitive test score while high salt-oil pattern (β=-0.28, 95%CI:-0.85--0.07) was negatively associated with verbal fluency test score. Conclusion: A dietary pattern with high intake of plant food and appropriate intake of animal food might be associated with better cognitive function of residents aged ≥50 years.

Identification and charactering of APX genes provide new insights in abiotic stresses response in Brassica napus

Ascorbate peroxidase (APX) plays an important role in scavenging H₂O₂ and balancing ROS content in plant cells, which is of great significance for the growth and development of life and resistance to external stress. However, up to now, APXs in Brassica napus (B. napus) have not been systematically characterized. In this study, a total of 26 BnaAPX genes were identified, which were distributed on 13 chromosomes and divided into five phylogenetic branches. Gene structure analysis showed that they had a wide varied number of exons while BnaAPXs proteins contained more similar motifs in the same phylogenetic branches. qRT-PCR analysis of 26 BnaAPX gene expression patterns showed that three putative cytosol BnaAPX genes BnaAPX1, BnaAPX2, BnaAPX9, two putatice microsomal genes BnaAPX18 and BnaAPX25 were up-regulated rapidly and robustly under high salt, water shortage and high temperature stresses. In addition, the above three abiotic stresses led to a significant increase in APX activity. The results provide basic and comprehensive information for further functional characterization of APX gene family in B. napus.

Cambridge hybrid closed-loop algorithm in children and adolescents with type 1 diabetes: a multicentre 6-month randomised controlled trial

BACKGROUND

Closed-loop insulin delivery systems have the potential to address suboptimal glucose control in children and adolescents with type 1 diabetes. We compared safety and efficacy of the Cambridge hybrid closed-loop algorithm with usual care over 6 months in this population.

METHODS

In a multicentre, multinational, parallel randomised controlled trial, participants aged 6-18 years using insulin pump therapy were recruited at seven UK and five US paediatric diabetes centres. Key inclusion criteria were diagnosis of type 1 diabetes for at least 12 months, insulin pump therapy for at least 3 months, and screening HbA1c levels between 53 and 86 mmol/mol (7·0-10·0%). Using block randomisation and central randomisation software, we randomly assigned participants to either closed-loop insulin delivery (closed-loop group) or to usual care with insulin pump therapy (control group) for 6 months. Randomisation was stratified at each centre by local baseline HbA1c. The Cambridge closed-loop algorithm running on a smartphone was used with either (1) a modified Medtronic 640G pump, Medtronic Guardian 3 sensor, and Medtronic prototype phone enclosure (FlorenceM configuration), or (2) a Sooil Dana RS pump and Dexcom G6 sensor (CamAPS FX configuration). The primary endpoint was change in HbA1c at 6 months combining data from both configurations. The primary analysis was done in all randomised patients (intention to treat). Trial registration ClinicalTrials.gov, NCT02925299.

FINDINGS

Of 147 people initially screened, 133 participants (mean age 13·0 years [SD 2·8]; 57% female, 43% male) were randomly assigned to either the closed-loop group (n=65) or the control group (n=68). Mean baseline HbA1c was 8·2% (SD 0·7) in the closed-loop group and 8·3% (0·7) in the control group. At 6 months, HbA1c was lower in the closed-loop group than in the control group (between-group difference -3·5 mmol/mol (95% CI -6·5 to -0·5 [-0·32 percentage points, -0·59 to -0·04]; p=0·023). Closed-loop usage was low with FlorenceM due to failing phone enclosures (median 40% [IQR 26-53]), but consistently high with CamAPS FX (93% [88-96]), impacting efficacy. A total of 155 adverse events occurred after randomisation (67 in the closed-loop group, 88 in the control group), including seven severe hypoglycaemia events (four in the closed-loop group, three in the control group), two diabetic ketoacidosis events (both in the closed-loop group), and two non-treatment-related serious adverse events. There were 23 reportable hyperglycaemia events (11 in the closed-loop group, 12 in the control group), which did not meet criteria for diabetic ketoacidosis.

INTERPRETATION

The Cambridge hybrid closed-loop algorithm had an acceptable safety profile, and improved glycaemic control in children and adolescents with type 1 diabetes. To ensure optimal efficacy of the closed-loop system, usage needs to be consistently high, as demonstrated with CamAPS FX.

FUNDING

National Institute of Diabetes and Digestive and Kidney Diseases.

One-step fabrication of soft calcium superhydrophobic surfaces by a simple electrodeposition process

A simple, one-step electrodeposition process was rapidly performed on a metal substrate to fabricate calcium superhydrophobic surfaces in an electrolyte containing calcium chloride (CaCl₂), myristic acid (CH₃(CH₂)₁₂COOH), and ethanol, which can avoid the intricate post-processing of surface treatment. The morphology and surface chemical compositions of the fabricated superhydrophobic surfaces were systematically examined by means of SEM, XRD, and FTIR, respectively. The results indicate that the deposited surfaces were mainly composed of calcium myristate, which can dramatically lower surface free energy. The shortest process for constructing a superhydrophobic surface is about 0.5 min, and the maximum contact angle of the as-prepared surfaces can reach as high as 166°, showing excellent superhydrophobicity. By adjusting the electrodeposition time, the structure of the cathodic surface transforms from the turfgrass structure, loose flower structures, larger and dense flower structures, secondary flower structures, and then into tertiary or more flower structures. The superhydrophobic surfaces showed excellent rebound performance with a high-speed camera. After a pressing force, their hardness increases, but the superhydrophobic performance is not weakened. Inversely, the bouncing performance is enhanced. This electrodeposition process offers a promising approach for large areas of superhydrophobic surfaces on conductive metals and strongly impacts the dynamics of water droplets.

We investigated a one-step method for calcium superhydrophobic surface preparation and researched the formation process of loose, flower-like microstructures. Also, we found that the pressing force strongly impacts the dynamics of water droplets.

Systematic analysis of CCCH zinc finger family in Brassica napus showed that BnRR-TZFs are involved in stress resistance

BACKGROUND

CCCH zinc finger family is one of the largest transcription factor families related to multiple biotic and abiotic stresses. Brassica napus L., an allotetraploid oilseed crop formed by natural hybridization between two diploid progenitors, Brassica rapa and Brassica oleracea. A systematic identification of rapeseed CCCH family genes is missing and their functional characterization is still in infancy.

RESULTS

In this study, 155 CCCH genes, 81 from its parent B. rapa and 74 from B. oleracea, were identified and divided into 15 subfamilies in B. napus. Organization and syntenic analysis explained the distribution and collinearity relationship of CCCH genes, the selection pressure and evolution of duplication gene pairs in B. napus genome. 44 diploid duplication gene pairs and 4 triple duplication gene groups were found in B. napus of CCCH family and the segmental duplication is attributed to most CCCH gene duplication events in B. napus. Nine types of CCCH motifs exist in B. napus CCCH family members, and motif C-X_7/8-C-X₅-C-X₃-H is the most common and a new conserved CCH motif (C-X₅-C-X₃-H) has been identified. In addition, abundant stress-related cis-elements exist in promoters of 27 subfamily IX (RR-TZF) genes and their expression profiles indicated that RR-TZF genes could be involved in responses to hormone and abiotic stress.

CONCLUSIONS

The results provided a foundation to understand the basic characterization and genes evolution of CCCH gene family in B. napus, and provided potential targets for genetic engineering in Brassicaceae crops in pursuit of stress-tolerant traits.

Recent advances in the contribution of circRNAs to cisplatin chemotherapy resistance in cancers

Worldwide, cancer is a serious threat to the health of citizens of every country, with the incidence and mortality increasing year by year. Cisplatin is the first-line anticancer drug commonly used in clinics and is widely used for the treatment of solid tumors including lung, gastric, liver, bladder, and ovarian cancer. Although cisplatin-based chemotherapy has a high clinical response efficacy, patients will inevitably develop drug resistance after repeated using, leading to severe restrictions of its application. Circular RNAs (circRNAs) are a promising class of non-coding RNAs capable of promoting or suppressing cancer via functioning as miRNAs sponges. Recently, an increasing amount of evidence shows that circRNAs are closely related to the cisplatin resistance of cancers. Therefore, standing at the perspective of the cisplatin chemotherapy resistance, this paper reviews the research progress of circRNAs related to cisplatin resistance of various cancers.

Evolution of the Electromagnetic Manipulation: From Tunable to Programmable and Intelligent Metasurfaces

Looking back on the development of metamaterials in the past 20 years, metamaterials have gradually developed from three-dimensional complex electromagnetic structures to a two-dimensional metasurface with a low profile, during which a series of subversive achievements have been produced. The form of electromagnetic manipulation of the metasurface has evolved from passive to active tunable, programmable, and other dynamic and real-time controllable forms. In particular, the proposal of coding and programmable metasurfaces endows metasurfaces with new vitality. By describing metamaterials through binary code, the digital world and the physical world are connected, and the research of metasurfaces also steps into a new era of digitalization. However, the function switch of traditional programmable metamaterials cannot be achieved without human instruction and control. In order to achieve richer and more flexible function regulation and even higher level metasurface design, the intelligence of metamaterials is an important direction in its future development. In this paper, we review the development of tunable, programmable, and intelligent metasurfaces over the past 5 years, focusing on basic concepts, working principles, design methods, manufacturing, and experimental validation. Firstly, several manipulation modes of tunable metasurfaces are discussed; in particular, the metasurfaces based on temperature control, mechanical control, and electrical control are described in detail. It is demonstrated that the amplitude and phase responses can be flexibly manipulated by the tunable metasurfaces. Then, the concept, working principle, and design method of digital coding metasurfaces are briefly introduced. At the same time, we introduce the active programmable metasurfaces from the following aspects, such as structure, coding method, and three-dimensional far-field results, to show the excellent electromagnetic manipulation ability of programmable metasurfaces. Finally, the basic concepts and research status of intelligent metasurfaces are discussed in detail. Different from the previous programmable metamaterials, which must be controlled by human intervention, the new intelligent metamaterials control system will realize autonomous perception, autonomous decision-making, and even adaptive functional manipulation to a certain extent.

Modeling of Wetting Transition of Liquid Metals on Organic Liquid Surfaces

Wettability of liquid metal gallium is of vital significance in the field of modern industries, such as direct writing printing and microfluidics. A liquid interface is a recently developed and promising approach to regulate wettability but has not been well applied in liquid metals yet. This study focuses on the wetting performance of gallium droplets on organic liquid films. The results show that the organic liquid film could change the wetting state of the gallium droplet. Based on the solid substrate roughness and surface tension of the organic liquid, we could estimate whether the gallium droplet is in a slippery Wenzel or a Cassie state. Subsequently, we apply the thermodynamic stable model on different organic liquid films by spreading parameters to predict a priori whether an arbitrary combination of solid roughness and organic liquid is suitable for designing lubricant-infused surfaces (LIS) used in gallium droplets. More interestingly, we found that the "cloaking" could delay surface oxide formation, which will benefit the manipulation of liquid metal droplets. This paper would provide a better understanding of wettability of liquid metal on an organic liquid surface.

Resveratrol Relieves Hyperoxia-Induced Brain Injury in Neonatal Rats by Activating Sirt1

OBJECTIVE

Neonatal rats with hyperoxia-induced brain injury were treated with resveratrol to investigate its protective effects through analyzing changes in reactive oxygen species (ROS), Sirt1, p53, and acetylated p53 levels.

STUDY DESIGN

Neonatal rats were randomly divided into hyperoxia and resveratrol intervened groups. Rats in both groups were placed in a hyperoxia chamber for 7 days to induce hyperoxia-induced brain injury. The rats in the resveratrol intervened group were administered resveratrol 60 μg/g body weight daily, whereas those in the hyperoxia group were administered a dimethyl sulfoxide-based solvent. Brain tissues were collected, and hematoxylin and eosin (H&E) and TUNEL staining, ROS measurements, real time-polymerase chain reaction, and western blotting were performed.

RESULTS

H&E and TUNEL staining revealed increased cell damage and apoptosis in brain tissue from hyperoxia-exposed animals compared with the findings in animals in the resveratrol intervened group. Real time-polymerase chain reaction and western blotting identified increases in Sirt1 expression and decreases in p53 expression in the resveratrol intervened group. In addition, acetylated p53 protein expression was lower in the intervened group than in the hyperoxia group.

CONCLUSION

Resveratrol alleviated brain apoptosis induced by hyperoxia in neonatal rats by upregulating Sirt1-mediated pathways, suggesting its potentially beneficial role in the treatment of brain injury induced by hyperoxia.

Heat shock preconditioning mesenchymal stem cells attenuate acute lung injury via reducing NLRP3 inflammasome activation in macrophages

OBJECTIVES

Acute lung injury (ALI) remains a common cause of morbidity and mortality worldwide, and to date, there is no effective treatment for ALI. Previous studies have revealed that topical administration of mesenchymal stem cells (MSCs) can attenuate the pathological changes in experimental acute lung injury. Heat shock (HS) pretreatment has been identified as a method to enhance the survival and function of cells. The present study aimed to assess whether HS-pretreated MSCs could enhance immunomodulation and recovery from ALI.

MATERIALS AND METHODS

HS pretreatment was performed at 42 °C for 1 h, and changes in biological characteristics and secretion functions were detected. In an in vivo mouse model of ALI, we intranasally administered pretreated umbilical cord-derived MSCs (UC-MSCs), confirmed their therapeutic effects, and detected the phenotypes of the macrophages in bronchoalveolar lavage fluid (BALF). To elucidate the underlying mechanisms, we cocultured pretreated UC-MSCs with macrophages in vitro, and the expression levels of inflammasome-related proteins in the macrophages were assessed.

RESULTS

The data showed that UC-MSCs did not exhibit significant changes in viability or biological characteristics after HS pretreatment. The administration of HS-pretreated UC-MSCs to the ALI model improved the pathological changes and lung damage-related indexes, reduced the proinflammatory cytokine levels, and modulated the M1/M2 macrophage balance. Mechanistically, both the in vivo and in vitro studies demonstrated that HS pretreatment enhanced the protein level of HSP70 in UC-MSCs, which negatively modulated NLR family pyrin domain containing 3 (NLRP3) inflammasome activation in alveolar macrophages. These effects were partially reversed by knocking down HSP70 expression.

CONCLUSION

HS pretreatment can enhance the beneficial effects of UC-MSCs in inhibiting NLRP3 inflammasome activation in macrophages during ALI. The mechanism may be related to the upregulated expression of HSP70.

Systematic analysis of JmjC gene family and stress--response expression of KDM5 subfamily genes in Brassica napus

Background

Jumonji C (JmjC) proteins exert critical roles in plant development and stress response through the removal of lysine methylation from histones. Brassica napus, which originated from spontaneous hybridization by Brassica rapa and Brassica oleracea, is the most important oilseed crop after soybean. In JmjC proteins of Brassica species, the structure and function and its relationship with the parents and model plant Arabidopsis thaliana remain uncharacterized. Systematic identification and analysis for JmjC family in Brassica crops can facilitate the future functional characterization and oilseed crops improvement.

Methods

Basing on the conserved JmjC domain, JmjC homologs from the three Brassica species, B. rapa (AA), B. oleracea (CC) and B. napus, were identified from the Brassica database. Some methods, such as phylogenic analysis, chromosomal mapping, HMMER searching, gene structure display and Logos analysis, were used to characterize relationships of the JmjC homologs. Synonymous and nonsynonymous nucleotide substitutions were used to infer the information of gene duplication among homologs. Then, the expression levels of BnKDM5 subfamily genes were checked under abiotic stress by qRT-PCR.

Results

Sixty-five JmjC genes were identified from B. napus genome, 29 from B. rapa, and 23 from B. oleracea. These genes were grouped into seven clades based on the phylogenetic analysis, and their catalytic activities of demethylation were predicted. The average retention rate of B. napus JmjC genes (B. napus JmjC gene from B. rapa (93.1%) and B. oleracea (82.6%)) exceeded whole genome level. JmjC sequences demonstrated high conservation in domain origination, chromosomal location, intron/exon number and catalytic sites. The gene duplication events were confirmed among the homologs. Many of the BrKDM5 subfamily genes showed higher expression under drought and NaCl treatments, but only a few genes were involved in high temperature stress.

Conclusions

This study provides the first genome-wide characterization of JmjC genes in Brassica species. The BnJmjC exhibits higher conservation during the formation process of allotetraploid than the average retention rates of the whole B. napus genome. Furthermore, expression profiles of many genes indicated that BnKDM5 subfamily genes are involved in stress response to salt, drought and high temperature.

Optical-transparent metasurface for flexible manipulation and analog information modulation

Recently, optically-transparent metasurface based on indium tin oxide (ITO) film has attracted wide attention due to its remarkable optical and electromagnetic characteristics. However, most previous researches on the ITO film mainly focus on the absorption because of its prominent loss-resistance property, but neglecting the further exploration on programmable functions. Here, we present a programmable metasurface based on an optically-transparent ITO glass, on which varactors are integrated to achieve flexible amplitude manipulation range of about 25 dB. More importantly, the presented programmable design can be applied for direct modulation on the carrier incident wave with the desired pre-designed analog wave-form. Within the 10 MHz modulation speed, both programmable amplitude manipulation and analog information modulation are demonstrated in the measurements, showing good agreement with theoretical analysis and simulations. Combining both optical transparency and programmable modulation capability, the presented metasurface will promote the potential applications in wireless communication, internet of things and other smart scenarios.

A novel approach quantifying the periorbital morphology: A comparison of direct, 2-dimensional, and 3-dimensional technologies

BACKGROUND

The measurement of anatomical structures is critical in plastic and reconstructive surgery. However, few detailed and standardized measurements have been widely used in the periorbital region. This study aimed to evaluate the feasibility of a novel detailed and standardized protocol with 2D and 3D technologies, and explore the relationship between them and direct measurements.

METHODS

Fifty healthy Caucasians (100 eyes) between 20 and 68 years old were recruited and captured for 3D photographs by VECTRA M3 3D Imaging System. Subsequently, 24 landmarks were located on each 3D photographs following a standardized protocol, and then 19 linear and 3 angular periorbital variables were measured. Furthermore, two-dimensional (2D) and direct measurements were conducted on each subject and compared with 3D measurements and one another.

RESULTS

The grand r means across all measurements were 0.77, 0.78, and 0.88 for direct vs. 2D values, direct vs. 3D values, and 3D vs. 2D values, respectively. The mean absolute differences were 1 mm (ranging from 0.2 mm to 3.7 mm) between direct and 3D measurements, 1 mm (ranging from 0.04 mm to 2.4 mm) between direct and 2D measurements, and 1 mm and 6.6° (ranging from 0.04 mm or 0.5° to 3 mm or 12.8°) between 2D and 3D measurements.

CONCLUSIONS

This study verified the feasibility of this detailed and standardized landmark localization protocol for assessing the periorbital morphology with 2D and 3D technologies. This protocol may work as a bridge communicating with all studies involving any of the three technologies in the future.

[Association between grip strength, rapid gait speed and cognition in people aged 50 and above in Shanghai during 2009-2010]

Objective: To investigate the association between grip strength, rapid gait speed and cognition in people aged 50 and above in Shanghai. Methods: Cross-sectional data was collected from the World Health Organization (WHO) study on global ageing and adult health (SAGE) wave 1 (2009-2010). A questionnaire survey was conducted among 8 643 participants aged 50 years old and above selected by using multistage random cluster sampling strategies in Shanghai. Factor analysis was applied to evaluate and generate cognitive function overall score.Association between grip strength, rapid gait speed and cognition was examined by a two-level hierarchical linear model. Results: A total of 8 175 participants were included in this study, who were (62.9±9.7) years old, including 3 782 (46.3%) males. The average grip strength and rapid gait speed of participants were (27.46±12.01) kg and (1.44±0.43) m/s respectively. The average scores of verbal recall (VR), verbal fluency (VF), forward digit span (FDS), backward digit span (BDS) and total cognitive scores were (5.72±0.09), (12.67±0.35), (6.84±0.10), (4.32±0.14) and (60.50±0.95) respectively. Grip strength was positively associated with VR, VF, FDS, BDS and overall cognition (standardized β=0.036, 0.079, 0.042, 0.046 and 0.043 respectively, P<0.05), and rapid gait speed was also positively associated with VR, VF and overall cognition (standardized β=0.040, 0.031, 0.039 respectively, P<0.05) after adjusted for age, sex, residence, education level, marital status, household income, co-morbidity of chronic conditions, BMI, drinking, smoking, fruits, vegetables intake and physical activities. Conclusion: Grip strength and rapid gait speed are both positively associated with cognitive function of people aged 50 and above, which would be indicators to evaluate their cognition.

Optically Transparent Metasurface Absorber Based on Reconfigurable and Flexible Indium Tin Oxide Film

In this paper, we present a flexible, breathable and optically transparent metasurface with ultra-wideband absorption. The designed double layer of indium tin oxide (ITO) films with specific carved structure realizes absorption and electromagnetic (EM) isolation in dual-polarization, as well as good air permeability. Under the illumination of x- and y-polarization incidence, the metasurface has low reflectivity and transmission from about 2 to 18 GHz. By employing ITO film based on polyethylene terephthalate (PET), the presented metasurface also processes the excellent flexibility and optically transparency, which can be utilized for wearable device application. In addition, the dual-layer design enables mechanically-reconfigurable property of the metasurface. The transmission and reflection coefficients in two polarizations show distinct difference when arranging the different relevant positions of two layers of the metasurface. A sample with 14*14 elements is designed, fabricated and measured, showing good agreement with the simulation results. We envision this work has various potentials in the wearable costume which demands both EM absorption and isolation.

Genome-Wide Gene Expression Profiles Analysis Reveal Novel Insights into Drought Stress in Foxtail Millet (Setaria italica L.)

Foxtail millet (Setaria italica (L.) P. Beauv) is an important food and forage crop because of its health benefits and adaptation to drought stress; however, reports of transcriptomic analysis of genes responding to re-watering after drought stress in foxtail millet are rare. The present study evaluated physiological parameters, such as proline content, p5cs enzyme activity, anti-oxidation enzyme activities, and investigated gene expression patterns using RNA sequencing of the drought-tolerant foxtail millet variety (Jigu 16) treated with drought stress and rehydration. The results indicated that drought stress-responsive genes were related to many multiple metabolic processes, such as photosynthesis, signal transduction, phenylpropanoid biosynthesis, starch and sucrose metabolism, and osmotic adjustment. Furthermore, the Δ1-pyrroline-5-carboxylate synthetase genes, SiP5CS1 and SiP5CS2, were remarkably upregulated in foxtail millet under drought stress conditions. Foxtail millet can also recover well on rehydration after drought stress through gene regulation. Our data demonstrate that recovery on rehydration primarily involves proline metabolism, sugar metabolism, hormone signal transduction, water transport, and detoxification, plus reversal of the expression direction of most drought-responsive genes. Our results provided a detailed description of the comparative transcriptome response of foxtail millet variety Jigu 16 under drought and rehydration environments. Furthermore, we identify SiP5CS2 as an important gene likely involved in the drought tolerance of foxtail millet.

Laparoscopic colorectal resection combined with simultaneous thermal ablation or surgical resection of liver metastasis: a retrospective comparative study

Objective: Colorectal liver metastasis is a critical cause of mortality. However, the safety and long-term prognosis of simultaneous colorectal tumor resection along with hepatic lesion ablation are debated. The current analysis was conducted to further clarify the controversy.Methods: In this retrospective study, we collected data of 68 patients who underwent ablation or resection for liver lesions combined with simultaneous laparoscopic primary colorectal tumor resection between September 2011 and October 2016 at the Third Affiliated Hospital of Sun Yat-sen University. Perioperative outcomes and long-term follow-up data were compared between patients in the resection and ablation groups.Results: Both groups had similar surgical duration (286.70 ± 78.33 vs. 313.67 ± 80.90 min), conversion rate (2 vs. 0), total expenses (81.51 ± 20.20 vs. 82.21 ± 27.81 kRMB, p = .914) and morbidities (11 vs. 24, p = .667). However, the postoperative hospital stays (12.82 ± 9.25 vs. 8.40 ± 2.38 d) and transfusion rates (56.52% vs. 8.89%) were significantly lower in the ablation group. The long-term overall survival (p = .714), disease-free survival (p = .680) and intra-hepatic recurrent-free survival (p = .496) were comparable between both groups.Conclusion: With respect to simultaneous treatment for both primary colorectal cancer and liver metastasis, hepatic lesion ablation was associated with lower blood loss and hospital stay duration than liver resection, without compromising the surgical safety and long-term prognosis.