Analysis of Evodiae Fructus by capillary electrochromatography-mass spectrometry with methyl-vinylimidazole functionalized organic polymer monolilth as stationary phases

Evodiae Fructus is used as a traditional Chinese medicine for the treatment of several kinds of diseases with its bioactive constituents. In this study, a capillary electrochromatography-mass spectrometry (CEC-MS) method was developed to determine three bioactive compounds including evodiamine, rutaecarpine and limonin in Evodiae Fructus fruit. Home-developed monolithic columns with methyl-vinylimidazole functionalized organic polymer monolilth as stationary phases were used in CEC-MS with excellent separation selectivity and high efficiency. The CEC-MS methods provided 4-16 folds improvement of LODs when compared with CEC-UV method. The conditions, which could affect separation efficiency and detection sensitivity, were optimized. Under optimum conditions, baseline separation with high detection sensitivity was obtained. The method showed good linearity (R² >0.99) of 0.8-160 μg mL^-1 with low limits of detection of 0.15-0.31 μg mL^-1. Relative standard deviations of migration time and relative peak areas were <13.89%. Recoveries of evodiamine, rutaecarpine and limonin in Evodiae Fructus fruit were tested and calculated, which ranged from 102% to 113%. Finally, the three bioactive compounds in Evodiae Fructus herb samples from different regions were analyzed and studied. It has been demonstrated that the developed method has great potential for quality control of Evodiae Fructus herb.

Advances in capillary electro-chromatography

Capillary electrochromatography (CEC) is a micro-scale separation technique which is a hybrid between capillary electrophoresis (CE) and liquid chromatography (LC). CEC can be performed in packed, monolithic and open-tubular columns. In recent three years (from 2016 to 2018), enormous attention for CEC has been the development of novel stationary phases. This review mainly covers the development of novel stationary phases for open-tubular and monolithic columns. In particular, some biomaterials attracted increasing interest. There are no significant breakthroughs in technology and principles in CEC. The typical CEC applications, especially chiral separations are described.

Fabrication of a ferrocene-based monolithic column with a network structure and its application in separation of protein and small molecules

A novel ferrocene-based monolith with a network structure was fabricated via in situ free radical polymerization using vinyl ferrocene as the co-monomer within a stainless-steel column (50 × 4.6 mm i.d.) for the separation of proteins from complex bio-samples, taking merit of the specific absorption of ferrocene to protein, including human plasma, egg white, and standard proteins. The morphology and pore size distribution indicate that the optimized monolith has a relatively uniform structure with the network. The results showed that 26 fractions were separated from human plasma, and the column efficiency of the aromatic small molecule, naphthalene, was up to 30,560 plates m^-1. The homemade monolith showed excellent selectivity for intact proteins, mainly depending on the hydrophobic chromatography mechanism of ferrocene. In addition, the electrostatic interaction and hydrogen-bond interaction were the additional interactions in the chromatographic separation owing to the sandwich structure of ferrocene present in the monolithic column.

Evaluation of meter-long monolithic columns for selected reaction monitoring mass spectrometry

Proteome is extremely complex as many proteins with a large dynamic range are involved. Nano-liquid chromatography/mass spectrometry-based proteomics has made it possible to separate and identify thousands of proteins in one shot. Although the number of identified proteins in proteomics has significantly improved, it is necessary to increase detection sensitivity to clearly identify low-abundant proteins. In this study, we developed meter-long monolithic columns with a small inner diameter and applied them to selected reaction monitoring-based proteomics for improving proteomic detection sensitivity. Bovine serum albumin tryptic digests were analyzed with optimized selected reaction monitoring methods, and separation efficiency and detection sensitivity in each monolithic column were evaluated. As a result, peak capacity increased by about 1.8-fold and peak area of peptide levels increased by about 2.3-fold. Although flow rate was reduced during analysis with columns of a smaller inner diameter, the peak area reproducibility was maintained. These data displayed the value of meter-long monolithic columns with small inner diameter for selected reaction monitoring-based proteomics.

Silver nanoparticles-coated monolithic column for in-tube solid-phase microextraction of monounsaturated fatty acid methyl esters

Based on our developed sodium hyaluronate-functionalized urea-formaldehyde (HA-UF) monolith, a silver nanoparticles-coated monolithic column has been fabricated via the interaction between silver nanoparticles (Ag NPs) and HA. The successful coating of Ag NPs on the parent monolith was proven by SEM, EDAX, UV-vis spectrum and XPS. Nitrogen adsorption desorption isotherms and Barret-Joyner-Halenda (BJH) pore size distributions of the parent and resultant monolith were also performed. Due to the Ag⁺-like affinity interaction caused by the contact of unsaturated compounds and Ag NPs, the Ag NPs-coated monolith showed satisfactory extraction efficiency towards these compounds, and was applied for in-tube solid-phase microextraction (SPME) of monounsaturated fatty acid methyl esters (MUFAMEs). Several factors for in-tube SPME, such as ACN percentage in the sampling solution, elution volume, sampling and elution flow rate, were investigated with respect to the extraction efficiency of model MUFAMEs. Under the optimized SPME conditions, a simple in tube SPME-Ag⁺-HPLC method for detection of model MUFAMEs has been proposed, the limits of detection (LODs) were less than 5.2 μg/kg, and the recoveries of spiked French fry samples were ranged from 86.6% to 96.1% with relative standard deviations (RSDs) less than 5.2%. This study provided an Ag NPs-coated monolith with good reproducibility and repeatable extraction performance, and developed an efficient method for in-tube SPME of MUFAMEs in practical food samples.

Ionic liquid-copolymerized monolith incorporated with zeolitic imidazolate framework-8 as stationary phases for enhancing reversed phase selectivity in capillary electrochromatography

A novel ionic liquid (1-allyl-methylimidazolium chloride, AlMeIm⁺Cl^-) polymer monolith poly(ionic liquid-co-ethylene dimethacrylate) incorporated with zeolitic imidazolate framework-8 (ZIF-8-poly(IL-co-EDMA)) was firstly synthesized as stationary phases of monolithic column for capillary electrochromatography by one-step copolymerization. Incorporation of ZIF-8 into ionic liquid polymer monolith evidently enhanced the separation selectivity for four alkylbenzenes in reversed phase capillary electrochromatography (CEC), due to the synergistic effect derived from the same imidazole ring structure of ionic liquid and organic ligands of ZIF-8. Meanwhile, electroosmotic flow (EOF) was generated by ionic liquid in a wide range of pH values from 2.0 to 12.0. The resultant monolithic columns were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR). The results indicated that the prepared monolithic columns had good permeability and mechanism stability. The resultant monolithic columns were applied for the separation of neutral compounds, anilines and phenols. The highest column efficiency was 2.07 × 10⁵ plates m^-1 (theoretical plates, N) for toluene. Under optimal conditions, reproducibility was obtained with relative standard deviations (RSDs) of the retention time for run-to-run, day-to-day, column-to-column and batch-to-batch were in the range of 1.58 - 3.19%, 1.92 - 3.87%, 3.84 - 4.96% and 2.63 - 4.33%, respectively. Incorporation ZIF-8 into ionic liquid polymer monolith was a promising way for the application of new materials in the fabrication of novel monolithic columns.

Monolith columns for liquid chromatographic separations of intact proteins: A review of recent advances and applications

In this article we survey 256 references (with an emphasis on the papers published in the past decade) on monolithic columns for intact protein separation. Protein enrichment and purification are included in the broadly defined separation. After a brief introduction, we describe the types of monolithic columns and modes of chromatographic separations employed for protein separations. While the majority of the work is still in the research and development phase, papers have been published toward utilizing monolithic columns for practical applications. We survey these papers as well in this review. Characteristics of selected methods along with their pros and cons will also be discussed.

Determination of Ochratoxin A traces in foodstuffs: Comparison of an automated on-line two-dimensional high-performance liquid chromatography and off-line immunoaffinity-high-performance liquid chromatography system

Automated on-line two-dimensional high-performance liquid chromatography method (2D-HPLC) is proposed to determine Ochratoxin A (OTA) in food samples as an alternative to OTA immunoaffinity column (IAC). An on-line 2D-HPLC system is designed for the analysis of OTA using an affinity-based monolithic column in the first dimension and reversed-phase C18 column in the second dimension. Initially, optimal OTA separation efficiency is determined through traditional HPLC system consisting of a P(HEMAPA) monolithic column coupled with HPLC system. Secondly, after providing optimum conditions, OTA determination was investigated through the 2D-HPLC system. According to results, 2D-HPLC system showed good linearity in the range 0.5 to 20 ng/mL with limit of detection (LOD) and limit of quantification (LOQ) values of 21.2 pg/mL and 64.3 pg/mL, respectively. The P(HEMAPA)-4 monolithic column displayed good recovery of OTA ranging from 104.34% to 107.33%. Relative standard deviations (RSD) varied in the range 0.21% to 1.31% thus indicating the efficiency of P(HEMAPA)-4 monolithic column developed for OTA.

Green synthesis of monolithic column incorporated with graphene oxide using room temperature ionic liquid and eutectic solvents for capillary electrochromatography

In this work, a hybrid monolith incorporated with graphene oxide (GO) was prepared in the first time with binary green porogens of deep eutectic solvents (DESs) and room temperature ionic liquids (RTILs). GO was modified with 3-(trimethoxysilyl) propylmethacrylate (γ-MPS), and the resultant GO-MPS can be incorporated into poly (methacrylic acid-co-butylmethacrylate-co-ethylene glycol dimethacrylate) monoliths covalently. A hybrid monolithic column with high permeability and homogeneity can be achieved due to good dispersion of GO-MPS in the green solvents. The GO-MPS incorporated monolith was characterized by transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis and nitrogen adsorption tests. The separation of small organic molecules of alkylphenones and alkylbenzenes was used to evaluate the performance of GO-MPS grafted monolith. The GO-MPS grafted monolith displayed the maximum column efficiency of 147,000 plates/m, about twice higher than the GO-free monolith. In addition, all of the retention and selectivity of small molecules of alkylphenones and alkylbenzenes increased due to the addition of GO-MPS. The results demonstrated that the use of DESs and RTILs is a powerful approach for the preparation of GO incorporated polymer monoliths. The monolith was further applied to the separation of tryptic digests from bovine serum albumin, and the result indicated its potential in the analysis of some complex samples.

RpeakChrom: Novel R package for the automated characterization and optimization of column efficiency in high-performance liquid chromatography analysis

Characterization of chromatographic columns using the traditional van Deemter method is limited by the necessity of calculating extra-column variance, issue particularly relevant when modeling asymmetrical peaks eluted from monolithic columns. A novel R package that implements Parabolic Variance Modified Gaussian approach for accurate peak modeling, van Deemter equation and two alternatives approaches, based on van Deemter, has been developed to calculate the height equivalent to a theoretical plate (HETP). To assess package capabilities conventional packed reverse-phase and monolithic HPLC columns were characterized. Peaks eluted from the monolithic column showed a high value of factor asymmetry due, in part, to the contribution of extra-column factors. Such deviation can be circumvented by the two alternatives approaches implemented in the R-package. Furthermore, increased values of eddy diffusion and mass transfer kinetics terms in HETP were observed for the packed column, while accuracy was below 9% in all cases. These results showed the usefulness of the R-package for both modeling chromatographic peaks and assessing column efficiency. The RpeakChrom package could become a helpful tool for testing new stationary phases during column development and to evaluate column during its lifetime. This R tool is freely available from CRAN (https://CRAN.R-project.org/package=RpeakChrom).

Rapid simultaneous determination of indacaterol maleate and glycopyrronium bromide in inhaler capsules using a validated stability-indicating monolithic LC method

Background

Chronic obstructive pulmonary disease (COPD) is a major cause of morbidity and mortality worldwide. A combination of indacaterol maleate with glycopyrronium bromide has recently been approved as a once-daily maintenance therapy in patients with COPD. The very low dose (μg level/capsule) renders the analysis of such products challenges. This study reports for the first time about HPLC method for the quality control of such combination and it is a stability indicating at the same time.

Results

A rapid, simple, precise and reproducible HPLC method was developed and validated for simultaneous determination of indacaterol maleate and glycopyrronium bromide using tenoxicam as an internal standard. The chromatographic separation was achieved on an onyx monolithic C18 column (100 × 4.6 mm) using a mobile phase consisting of acetonitrile and 30 mM phosphate buffer (pH 3.5) (30:70, v/v), run at a flow rate of 2 mL/min with UV detection at 210 nm. The total analysis time was less than 3 min. The HPLC method was validated for linearity, limits of detection and quantitation, precision, accuracy, system suitability and robustness. Calibration curves were obtained in the concentration ranges of 1–44 µg/mL for indacaterol maleate and 0.5–20 µg/mL for glycopyrronium bromide. Stability tests were done through exposure of the analyte solution for different stress conditions and the results indicate no interference of degradants with HPLC method.

Conclusions

The method was successfully applied for the quantitative analysis of indacaterol maleate and glycopyrronium bromide both individually and in a combined pharmaceutical inhaler capsules to support the quality control and to assure the therapeutic efficacy of the two drugs. The simple procedure involved in sample preparation and the short run-time added the important property of high throughput to the method. Graphical abstract

Off-line mixed-mode liquid chromatography coupled with reversed phase high performance liquid chromatography-high resolution mass spectrometry to improve coverage in lipidomics analysis

The confident identification and in-depth profiling of molecular lipid species remain to be a challenge in lipidomics analysis. In this work, an off-line two-dimensional mixed-mode and reversed-phase liquid chromatography (RPLC) method combined with high-field quadrupole orbitrap mass spectrometer (Q Exactive HF) was developed to profile lipids from complex biological samples. In the first dimension, 22 different lipid classes were separated on a monolithic silica column with elution order from neutral to polar lipids. A total of 13 fractions were collected and run on a RPLC C30 column in the second dimension for further separation of the lipid molecular species based on their hydrophobicity, with the elution order being determined by both the length and degree of unsaturation in the fatty-acyl chain. The method was applied to analyze lipids extracted from rat plasma and rat liver. Fatty acid methyl ester analysis by gas chromatography-mass spectrometry was used to identify the fatty acyls from total lipid extracts, which provided a more confident identification of the lipid species present in these samples. More than 800 lipids were identified in each sample and their molecular structures were confidentially confirmed using tandem mass spectrometry (MS/MS). The number of lipid molecular species identified in both rat plasma and rat liver by this off-line two-dimensional method is approximately twice of that by one-dimensional RPLC-MS/MS employing a C30 column. This off-line two-dimensional mixed-mode LC-RPLC-MS/MS method is a promising technique for comprehensive lipid profiling in complex biological matrices.

Green approach using monolithic column for simultaneous determination of coformulated drugs

Green chemistry and sustainability is now entirely encompassed across the majority of pharmaceutical companies and research labs. Researchers' attention is careworn toward implementing the green analytical chemistry principles for more eco-friendly analytical methodologies. Solvents play a dominant role in determining the greenness of the analytical procedure. Using safer solvents, the greenness profile of the methodology could be increased remarkably. In this context, a green chromatographic method has been developed and validated for the simultaneous determination of phenylephrine, paracetamol, and guaifenesin in their ternary pharmaceutical mixture. The chromatographic separation was carried out using monolithic column and green solvents as mobile phase. The use of monolithic column allows efficient separation protocols at higher flow rates, which results in short time of analysis. Two-factor three-level experimental design was used to optimize the chromatographic conditions. The greenness profile of the proposed methodology was assessed using eco-scale as a green metrics and was found to be an excellent green method with regard to the usage and production of hazardous chemicals and solvents, energy consumption, and amount of produced waste. The proposed method improved the environmental impact without compromising the analytical performance criteria and could be used as a safer alternate for the routine analysis of the studied drugs.

Development and validation of HPLC method with fluorometric detection for quantification of bisnaphthalimidopropyldiaminooctane in animal tissues following administration in polymeric nanoparticles

A simple, sensitive and specific high-performance liquid chromatography method for the quantification of bisnaphthalimidopropyldiaminooctane (BNIPDaoct), a potent anti-Leishmania compound, incorporated into poly(d,l-lactide-co-glycolic acid) (PLGA) nanoparticles was developed and validated toward bioanalysis application. Biological tissue extracts were injected into a reversed-phase monolithic column coupled to a fluorimetric detector (λexc=234nm, λem=394nm), using isocratic elution with aqueous buffer (acetic acid/acetate 0.10M, pH 4.5, 0.010M octanesulfonic acid) and acetonitrile, 60:40 (v/v) at a flow rate of 1.5mLmin(-1). The run time was 6min, with a BNIPDaoct retention time of 3.3min. Calibration curves were linear for BNIPDaoct concentrations ranging from 0.002 to 0.100μM. Matrix effects were observed and calibration curves were performed using the different organ (spleen, liver, kidney, heart and lung) extracts. The method was found to be specific, accurate (97.3-106.8% of nominal values) and precise for intra-day (RSD<1.9%) and inter-day assays (RSD<7.2%) in all matrices. Stability studies showed that BNIPDaoct was stable in all matrices after standing for 24h at room temperature (20°C) or in the autosampler, and after three freeze-thaw cycles. Mean recoveries of BNIPDaoct spiked in mice organs were >88.4%. The LOD and LOQ for biological matrices were ≤0.8 and ≤1.8nM, respectively, corresponding to values ≤4 and ≤9nmolg(-1) in mice organs. The method developed was successfully applied to biodistribution assessment following intravenous administration of BNIPDaoct in solution or incorporated in PLGA nanoparticles.

Exoproteome analysis of Clostridium cellulovorans in natural soft-biomass degradation

Clostridium cellulovorans is an anaerobic, cellulolytic bacterium, capable of effectively degrading various types of soft biomass. Its excellent capacity for degradation results from optimization of the composition of the protein complex (cellulosome) and production of non-cellulosomal proteins according to the type of substrates. In this study, we performed a quantitative proteome analysis to determine changes in the extracellular proteins produced by C. cellulovorans for degradation of several types of natural soft biomass. C. cellulovorans was cultured in media containing bagasse, corn germ, rice straw (natural soft biomass), or cellobiose (control). Using an isobaric tag method and a liquid chromatograph equipped with a long monolithic silica capillary column/mass spectrometer, we identified 372 proteins in the culture supernatant. Of these, we focused on 77 saccharification-related proteins of both cellulosomal and non-cellulosomal origins. Statistical analysis showed that 18 of the proteins were specifically produced during degradation of types of natural soft biomass. Interestingly, the protein Clocel_3197 was found and commonly involved in the degradation of every natural soft biomass studied. This protein may perform functions, in addition to its known metabolic functions, that contribute to effective degradation of natural soft biomass.

A one-step preparation method of monolithic enzyme reactor for highly efficient sample preparation coupled to mass spectrometry-based proteomics studies

Mass spectrometry (MS) coupled to sample preparation and separation techniques has become a primary tool for proteomics studies. However, due to sample complexity, it is often challenging to achieve fast and efficient sample preparation prior to MS analysis. In recent decades, monolithic materials have been developed not only as chromatographic media, but also as efficient solid supports for immobilizing multiple types of affinity reagents. Herein, the N-acryloxysuccinimide-co-acrylamide-co-N,N'-methylenebisacrylamide (NAS-AAm-Bis) monolith was fabricated within silanized 200 μm i.d. fused-silica capillaries and was used as an immobilized enzyme reactor (IMER). The column was conjugated with trypsin/Lys-C and Lys-N enzymes to allow enzymatic digestions to occur while protein mixture was loaded onto the IMER column followed by MS-based proteomics analysis. Similar MS signal and protein sequence coverage were observed using protein standard bovine serum albumin (BSA) compared to in-solution digestion. Furthermore, mouse serum, yeast, and human cell lysate samples were also subjected to enzymatic digestion by both IMER (in seconds to minutes) and conventional in solution digestion (overnight) for comparison in large-scale proteomics studies. Comparable protein identification results obtained by the two methods highlighted the potential of employing NAS-based IMER column for fast and highly efficient sample preparation for MS analysis in proteomics studies.

Elucidation of the recognition mechanisms for hemicellulose and pectin in Clostridium cellulovorans using intracellular quantitative proteome analysis

Clostridium cellulovorans is an anaerobic, cellulolytic bacterium, capable of effectively degrading and metabolizing various types of substrates, including cellulose, hemicellulose (xylan and galactomannan), and pectin. Among Clostridia, this ability to degrade and metabolize a wide range of hemicellulose and pectin substrates is a unique feature; however, the mechanisms are currently unknown. To clarify the mechanisms of hemicelluloses and pectin recognition and metabolism, we carried out a quantitative proteome analysis of C. cellulovorans cultured with these substrates. C. cellulovorans was cultured in the medium of glucose (control), xylan, galactomannan (Locus bean gum, LBG), or pectin for 36 h. Xylan and galactomannan were used to search for the common recognition mechanisms of hemicellulose, and pectin was used to search for unique recognition systems in C. cellulovorans. Using an isobaric tag method and liquid chromatograph/mass spectrometer equipped with a long monolithic silica capillary column, we identified 734 intracellular proteins from all substrates. We performed KEGG analyses and cluster analyses of the resulting proteins. In the KEGG analyses, we found common degradation mechanisms for hemicellulose and pectin. In the cluster analysis corresponding to the genome analysis, we detected substrate-specific clusters that include genes involved in substrate recognition, substrate degradation, and metabolism. Combining the results of the KEGG analyses and cluster analyses, we propose the mechanisms involved in the recognition and metabolism of hemicellulose and pectin in C. cellulovorans.

Phosphatidylcholine covalently linked to a methacrylate-based monolith as a biomimetic stationary phase for capillary liquid chromatography

In this study a strategy to immobilize phospholipids onto a polymer-based stationary phase is described. Methacrylate-based monoliths in capillary format (150×0.1mm) were modified by soybean phosphatidylcholine through 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide coupling to obtain stationary phases suitable to mimic cell surface membranes. The covalent coupling reaction involves the phosphate group in phospholipids; therefore, the described methodology is suitable for all types of phospholipids. Immobilization of soy bean phosphatidylcholine on the monolith was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry of the fatty alcohol profile, generated upon reductive cleavage of the fatty acyl side chains of the phospholipid on the monolith surface with lithium aluminium hydride. The prepared stationary phases were evaluated through studies on the retention of low-molar mass model analytes including neutral, acidic, and basic compounds. Liquid chromatographic studies confirmed predominant hydrophobic interactions between the analytes and the synthesized stationary phase; however, electrostatic interactions contributed to the retention as well. The synthesized columns showed high stability even with fully aqueous mobile phases such as Dulbecco's phosphate-buffered saline solution.

Profiling of drug binding proteins by monolithic affinity chromatography in combination with liquid chromatography-tandem mass spectrometry

A new approach for proteome-wide profiling drug binding proteins by using monolithic capillary affinity chromatography in combination with HPLC-MS/MS is reported. Two immunosuppresive drugs, namely FK506 and cyclosporin A, were utilized as the experimental models for proof-of-concept. The monolithic capillary affinity columns were prepared through a single-step copolymerization of the drug derivatives with glycidyl methacrylate and ethylene dimethacrylate. The capillary chromatography with the affinity monolithic column facilitates the purification of the drug binding proteins from the cell lysate. By combining the capillary affinity column purification and the shot-gun proteomic analysis, totally 33 FK506- and 32 CsA-binding proteins including all the literature reported target proteins of these two drugs were identified. Among them, two proteins, namely voltage-dependent anion-selective channel protein 1 and serine/threonine-protein phosphatase PGAM5 were verified by using the recombinant proteins. The result supports that the monolithic capillary affinity chromatography is likely to become a valuable tool for profiling of binding proteins of small molecular drugs as well as bioactive compounds.

Single-step approach for fabrication of vancomycin-bonded silica monolith as chiral stationary phase

A vancomycin-bonded silica monolithic column for capillary electrochromatography (CEC) was prepared by a single-step in situ sol-gel approach. This sol-gel process incorporates a synthetic sol-gel precursor which contains a macrocyclic antibiotic, vancomycin, to form a porous silica network inside a fused-silica capillary. To avoid degradation of vancomycin during the column fabrication, a mild step was adopted into the sol-gel process. The performance of the vancomycin chiral stationary phase was investigated by CEC in both the reversed-phase mode and the normal-phase mode. The vancomycin chiral stationary phase was optimized with respect to vancomycin loading in the reversed-phase mode for chiral separation of thalidomide enantiomers. The best efficiency and resolution values of 94600plates/m and 5.79, respectively, were achieved. The optimized column was further applied to chiral separation of alprenolol enantiomers. A plate height of less than 7μm for the first eluted enantiomer of alprenolol was obtained in an aqueous mobile phase at a flow rate of 0.74mm/s. Using enantiomers of seven β-blockers and some other basic enantiomers as test analytes, separation efficiencies of up to 148100plates/m in the reversed-phase mode and up to 138100plates/m in the normal-phase mode were achieved.

Simultaneous determination of tylosin and josamycin residues in muscles, liver, eggs and milk by MLC with a monolithic column and time-programmed UV detection: application to baby food and formulae

Background

Tylosin and Josamycin are macrolide antibiotics. They are used in the treatment of pneumonia, arthritis and mastitis in cattle, and mycoplasma infections in poultry. The incorrect use of antibiotics has lead to the presence of antibiotic residues in foods. The residues cause toxic effects on consumers.

Results

A simple and sensitive method was optimized and validated for the analysis of tylosin and josamycin residues in food samples. Analytical separation was performed in less than 10 min using a RP C₁₈ monolithic column with time-programmed UV detection at 287 nm and 232 nm and a micellar solution of 0.17 M sodium dodecyl sulphate, 14% methanol and 0.3% triethylamine in 0.02 M phosphoric acid buffered at pH 4 as the mobile phase. The method was fully validated in accordance with ICH guidelines. The micellar method was successfully applied to quantitatively determine tylosin and josamycin residues in spiked chicken muscles, chicken liver, bovine muscles, liver, milk and eggs. It was also extended to the determination of tylosin and josamycin residues in chicken-based baby food and baby formulae. The compounds were separated by a monolithic column which, on account of its particular structure, could bear higher flow rates than usually found for this kind of analysis. High extraction efficiency for tylosin and josamycin was obtained without matrix interference in the extraction process and in the subsequent chromatographic determination. No organic solvent was used during the pretreatment step. Hence, it is considered an interesting technique for “green” chemistry.

Conclusion

The proposed method was validated and successfully applied for the determination of tylosin and josamycin residues in spiked chicken muscles, chicken liver, bovine muscles, liver, milk and eggs. It was also extended to the determination of tylosin and josamycin residues in chicken-based baby food and baby formulae.

Off-line hyphenation of boronate affinity monolith-based extraction with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for efficient analysis of glycoproteins/glycopeptides

Boronate affinity materials have attracted increasing attentions as sample enrichment platforms for glycoproteomic analysis in recent years. However, most of the boronate affinity materials that have already employed for proteomic analysis are suffering from apparent disadvantages, such as alkaline pH for binding, weak affinity, and relatively poor selectivity. Benzoboroxoles are a unique class of boronic acids which have showed excellent binding properties for the recognition of cis-diol-containing compounds. Recently, a 3-carboxy-benzoboroxole-functionalized monolithic column had been reported and it had exhibited the best selectivity and affinity as well as the lowest binding pH among all reported boronate affinity monolithic columns. In this study, an off-line hyphenation of this boronate affinity monolithic column-based extraction with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was developed and the powerfulness of this hyphenated approach in the analysis of glycoproteins and glycopeptides in complex samples was investigated. The approach was first applied to the analysis of glycopeptides in the tryptic digest of horseradish peroxidase (HRP). Totally 22 glycopeptides were identified. To the best of our knowledge, this is the best performance among all the boronic acid-functionalized materials. We further employed this approach to the analysis of intact proteins in human saliva. Totally 6 intact glycoproteins were successfully identified. As comparison, when the samples were analyzed without extraction, only a few glycopeptides were identified from the tryptic digest of HRP while no glycoproteins were found from the saliva samples.

Pyridinylboronic acid-functionalized organic-silica hybrid monolithic capillary for the selective enrichment and separation of cis-diol-containing biomolecules at acidic pH

Boronate affinity chromatography (BAC) is a unique means for the selective separation and enrichment of 1,2 and 1,3 cis-diol-containing compounds. However, conventional boronate affinity materials require a basic binding pH (usually≥8.5), which gives rise to not only inconvenience in operation but also the risk of degradation of labile compounds. Although the applicable pH has been expanded to 5.0 in recent years, the current boronate affinity materials still fail to meet the acidic pH end of frequently used biosamples, particularly urine (pH 4.5). In this study, we report a 3-pyridylboronic acid-functionalized organic-silica hybrid monolithic capillary that exhibited a binding pH of 4.5, the lowest so far in BAC. Such a binding pH enabled direct extraction of cis-diol-containing biomolecules such as nucleosides from urine samples without pH adjustment. The boronate affinity monolithic capillary showed enhanced affinity toward negatively charged cis-diol-containing analytes such as ribonucleotides. Moreover, it could function as an anion exchanger at acidic pH (∼2). The column was found to retain multiple compounds from urine, which can be assumed to be at least mostly if not entirely cis-diol-containing compounds.

Occurrence of deoxynivalenol in foods for human consumption from tehran, iran

The occurrence of deoxynivalenol (DON) in retail foods in Tehran (Iran) was determined using high-performance liquid chromatography technique and immunoaffinity column as the clean-up step. A method was validated for analysis of DON in rice, bread, puffed corn snack and wheat flour. The average recoveries and precision (RSD) for DON in different foods ranged 84.2-93.1% and 2.9-12.0%, respectively. A survey of DON was performed on the 72 samples of rice, bread, puffed corn snack, and wheat flour collected from Tehran retail market. The data showed that 10 samples (13.9%) out of 72 samples were contaminated with DON with the maximum level of 368.7 ng/g. The samples had contamination level lower than the maximum tolerated level of DON in foods in Iran. The total intake of DON was under the provisional maximum tolerable daily intake set for DON by the JECFA.

Rapid chromatographic determination of caseins in milk with photometric and fluorimetric detection using a hydrophobic monolithic column

Reverse-phase liquid chromatographic methods using a hydrophobic C18 monolithic column and on-line photometric and fluorimetric detection for the determination of the major casein (CN) proteins in milk are presented. The separation of αs1-CN, αs2-CN, β-CN and κ-CN was achieved in only five minutes. Fluorimetric detection enabled better analytical results than photometric detection. Thus, the dynamic ranges of the calibration graphs and detection limits obtained using fluorimetric detection were (mgmL(-)(1)): αs1-CN (0.74-10.0, 0.22), αs2-CN (0.15-10.0, 0.045), β-CN (0.68-10.0, 0.20) and κ-CN (0.21-10.0, 0.06). The analytical features of the photometric method, which does not allow the quantification of β-casein, were (mgmL(-)(1)): αs1-CN (1.5-9.0, 0.45), αs2-CN (1.4-10.0, 0.43) and κ-CN (0.4-9.0, 0.12). Precision data, expressed as relative standard deviation, ranged between 0.6% and 5.3% for the fluorimetric method and between 2.4% and 6.2% for the photometric method. Both methods were applied to the analysis of three different milk samples, obtaining recoveries in the ranges of 86.6-103.2% and 92.0-106.5% using fluorimetric and photometric detection, respectively.