Performance evaluation of CA242 by flow fluorescence assay

ABSTRACT

Carbohydrate antigen 24-2 (CA24-2) is usually used as a biomarker for the diagnosis of pancreatic cancer and colorectal cancer. Currentlly, a new quantitative assay kit for CA242 by flow fluorometry assay (FFA) was developed by Shanghai Tellgen Cooperation Co. Ltd. China. Therefore, we conducted the performance evaluation for it.According to the "Guiding principles on performance analysis of diagnostic reagents in vitro" and "American association of clinical laboratory standardization guidelines EP15-A2", the accuracy, precision, linear range, reportable range, biological reference interval verification, carry-over contamination rate, anti-interference capability and cross reaction of the assay kit used in TESMI F3999-Luminex200 automatic immunoassay system were evaluated. In addition, the assay kit was performed in parallel to CanAg kit (CanAg Diagnostics Products Beijing Co., Ltd.) to analyze the correlation between the 2 kits.The bias of accuracy of the new assay kit was less than 12.5% and the coefficient of variations (CVs) of precision were all less than 10.0%. The linear range of CA242 concentration of the testing kit was between 3.46 U/ml and 434.76 U/ml and the reportable range was 6.00 to 535.13 U/ml. The CA242 reference interval 0.00 to 20.00 U/ml was suitable for use in laboratory. The carry-over contamination rate was -0.14%. Correlation analysis showed a satisfactory relevance and consistency (r = 0.982, P < .001) between the new assay kit and CanAg kit, with a regression equation Y = 1.0012X to 0.878 (R2 = 0.9647, P < .001). No statistically significant difference between serum samples without interferences and samples containing lipemia, bilirubin and hemoglobin. And no cross reaction existed between the assay kit and the other tumor markers, such as carbohydrate antigen 125 (CA125), alpha-fetoprotein (AFP), and cytokeratin-19 soluble fragment (CYFRA21-1).The new CA242 quantitative assay kit possesses good detection performance when it is used in TESMI F3999-Luminex200 automatic immunoassay system, which can be used for the examination of CA242 in clinical practice.

Green conventional and first-order derivative fluorimetry methods for determination of trimebutine and its degradation product (eudesmic acid). Emphasis on the solvent and pH effects on their emission spectral properties

In this report, the fluorescence properties of the antimuscarinic drug trimebutine maleate (TRB) were fully studied and characterized. TRB exhibited intrinsic fluorescence that is greatly dependent on the local environmental factors including the solvent nature and the pH. Yet, its fluorescence was not significantly influenced by the existence of some surface active agents and polymer. The outcomes of this investigation verified that TRB fluorescence emission is intense in ethanol: 1.0 M aqueous acetic acid (9:1, v/v) with emission maxima at 357 nm and excitation maxima at 270 nm. Whereas, going towards higher pH causes fluorescence quenching. These conditions permitted ultrasensitive fluorimetric determination of TRB over the concentration range of 2.00-1500.0 ng/mL with a lower detection limit of 0.40ng/mL Application for the determination of TRB in tablets, ampoule and suspension was successfully achieved with %recoveries ranged between 98.21-100.17%. Furthermore, a first order derivative fluorimetric method was validated for resolving and simultaneous determination of TRB and its degradation product and impurity, eudesmic acid (EUA) making use of the pH-mediated fluorescence spectral shift of EUA. An ethanolic solution containing acetate buffer (pH 5.3) was used for this goal with excitation at 255 nm and measurement of the first order derivative peak amplitudes at respective zero-crossing points of 375 and 351 nm over the corresponding concentration ranges of 20.00-500.00 and 10.00-300.00 ng/mL for TRB and EUA, respectively. The two methods were assessed regarding greenness and eco-friendship by the National Environmental Methods Index and analytical eco-scale score approaches which confirmed their excellent greenness and safety.

Bio-barcode triggered isothermal amplification in a fluorometric competitive immunoassay for the phytotoxin abrin

Abrin is one of the most toxic phytotoxins to date, and is a potential biological warfare agent. A bio-barcode triggered isothermal amplification for fluorometric determination of abrin is described. Free abrin competes with abrin-coated magnetic microparticles (MMP) probes to bind to gold nanoparticle (AuNP) probes modified with abrin antibody and bio-barcoded DNA. Abundant barcodes are released from the MMP-AuNP complex via dithiothreitol treatment. This triggers an exponential amplification reaction (EXPAR) that is monitored by real-time fluorometry, at typical excitation/emission wavelengths of 495/520 nm. The EXPAR assay is easily operated, highly sensitive and specific. It was used to quantify abrin in spiked commercial samples. The detection limit (at S/N = 3; for n = 6) is 5.6 pg·mL^-1 which is considerably lower than previous reports. This assay provides a universal sensing platform and has great potential for determination of various analytes, including small molecules, proteins, DNA, and cells. Graphical abstract Schematic representation of the bio-barcode triggered exponential amplification reaction (EXPAR) for a fluorometric competitive immunoassay for abrin. The limit of detection is 5.6 pg mL^-1 with a large dynamic range from 10 pg mL^-1 to 1 µg mL^-1.

Gold-decorated magnetic nanoparticles modified with hairpin-shaped DNA for fluorometric discrimination of single-base mismatch DNA

The authors describe the use of gold-decorated magnetic nanoparticles (Au/MNPs) in discriminating DNA sequences with a single-base (guanine) mismatch. The Au/MNPs were characterized through dynamic light scattering, X-ray diffraction, superconducting quantum interference device, and UV/visible spectroscopy. They were then conjugated to a probe oligomer consisting of a hairpin-shaped DNA sequence carrying two signalling fluorophores: fluorescein at its 3' end and pyrene in the loop region. When interacting with the target DNA sequences, the hybridized probe-target duplex renders the pyrene signal (at excitation/emission wavelengths of 345/375 nm) either quenched or unquenched. Quenching (or nonquenching) of the pyrene fluorescence depends on the presence of a guanine (or a nonguanine) nucleotide at the designated polymorphic site. The linear range of hybridization in these Au/MNPs is from 0.1 nM to 1.0 μM of ssDNA. Conceivably, this system may serve as a single-nucleotide polymorphism probe. Graphical Abstract Schematic presentation of probe-conjugated Au/MNP preparation (upper panel) and working principle to discriminate DNA with or without single-base (guanine) mismatch sequences at the polymorphic sites (lower panel). Py denotes pyrene-hooked pyrrolocytidine; F denotes fluorescein.

Fluorometric determination of glucose based on a redox reaction between glucose and aminopropyltriethoxysilane and in-situ formation of blue-green emitting silicon nanodots

A method is described for fluorometric detection of glucose. It is based on the finding that silicon nanodots (SNDs) are formed from glucose and aminopropyltriethoxysilane (APTES) under mild experimental conditions. The SNDs thus formed have an average diameter of ∼2 nm, exhibit good water dispersibility, blue fluorescence (with excitation/emission maxima at 410/475 nm), broad pH tolerance, and are photostable. The assay was applied to the quantification of glucose with high sensitivity, good specificity, and over a wide detection range (from 10 μM to 0.9 mM). It was applied to the determination of glucose in spiked serum samples and gave satisfactory results and recoveries. Graphical abstract Schematic presentation of serum glucose detection based on a redox reaction between glucose and aminopropyltriethoxysilane and in-situ formation of blue-green emitting silicon nanodots.

Practical fluorimetric assay for the detection of anticancer drug SN-38 in human plasma

The implementation of therapeutic drug monitoring in the routine clinical practice in oncology is mainly limited by the lack of therapeutic indexes for the majority of the anticancer drugs, and by the absence of suitable analytical tools, which can accurately quantify in real time the concentration of the administered drugs and their relevant metabolites in biological fluids. In this work, a simple and efficient fluorimetric determination of SN-38, the active metabolite of the anticancer drug irinotecan, was developed and applied to human plasma samples. The intrinsic fluorescence of SN-38 allowed its quantification in the range 10-500 ng mL^-1 with a LOQ of 5.0 ng mL^-1 and a LOD of 1.5 ng mL^-1. Low interferences due to main metabolites of irinotecan and comedications, commonly associated with administration of irinotecan, were observed. A validation study, according to FDA and EMA guidelines for bioanalytical method validation, was carried out and, finally, blind samples were analyzed in parallel with a HPLC-MS method obtaining an excellent agreement between the two techniques.

Reliability of maximal mitochondrial oxidative phosphorylation in permeabilized fibers from the vastus lateralis employing high-resolution respirometry

The purpose was to assess the impact of various factors on methodological errors associated with measurement of maximal oxidative phosphorylation (OXPHOS) in human skeletal muscle determined by high-resolution respirometry in saponin-permeabilized fibers. Biopsies were collected from 25 men to assess differences in OXPHOS between two muscle bundles and to assess the correlation between OXPHOS and the wet weight of the muscle bundle. Biopsies from left and right thighs of another five subjects were collected on two occasions to compare limbs and time-points. A single muscle specimen was used to assess effects of the anesthetic carbocaine and the influence of technician. The difference in OXPHOS between two fiber-bundles from the same biopsy exhibited a standard error of measurement (SEM) of 10.5 pmol · s-1  · mg-1 and a coefficient of variation (CV) of 15.2%. The differences between left and right thighs and between two different time-points had SEMs of 9.4 and 15.2 pmol · s-1  · mg-1 and CVs of 23.9% and 33.1%, respectively. The average (±SD) values obtained by two technicians monitoring different bundles of fibers from the same biopsy were 31.3 ± 7.1 and 26.3 ± 8.1 pmol · s-1  · mg-1 . The time that elapsed after collection of the biopsy (up to a least 5 h in preservation medium), wet weight of the bundle (from 0.5 to 4.5 mg) and presence of an anesthetic did not influence OXPHOS. The major source of variation in OXPHOS measurements is the sample preparation. The thigh involved, time-point of collection, size of fiber bundles, and time that elapsed after biopsy had minor or no effect.

Liquid Chromatography with a Fluorimetric Detection Method for Analysis of Paralytic Shellfish Toxins and Tetrodotoxin Based on a Porous Graphitic Carbon Column

Paralytic shellfish toxins (PST) traditionally have been analyzed by liquid chromatography with either pre- or post-column derivatization and always with a silica-based stationary phase. This technique resulted in different methods that need more than one run to analyze the toxins. Furthermore, tetrodotoxin (TTX) was recently found in bivalves of northward locations in Europe due to climate change, so it is important to analyze it along with PST because their signs of toxicity are similar in the bioassay. The methods described here detail a new approach to eliminate different runs, by using a new porous graphitic carbon stationary phase. Firstly we describe the separation of 13 PST that belong to different groups, taking into account the side-chains of substituents, in one single run of less than 30 min with good reproducibility. The method was assayed in four shellfish matrices: mussel (Mytillus galloprovincialis), clam (Pecten maximus), scallop (Ruditapes decussatus) and oyster (Ostrea edulis). The results for all of the parameters studied are provided, and the detection limits for the majority of toxins were improved with regard to previous liquid chromatography methods: the lowest values were those for decarbamoyl-gonyautoxin 2 (dcGTX2) and gonyautoxin 2 (GTX2) in mussel (0.0001 mg saxitoxin (STX)·diHCl kg⁻¹ for each toxin), decarbamoyl-saxitoxin (dcSTX) in clam (0.0003 mg STX·diHCl kg⁻¹), N-sulfocarbamoyl-gonyautoxins 2 and 3 (C1 and C2) in scallop (0.0001 mg STX·diHCl kg⁻¹ for each toxin) and dcSTX (0.0003 mg STX·diHCl kg⁻¹ ) in oyster; gonyautoxin 2 (GTX2) showed the highest limit of detection in oyster (0.0366 mg STX·diHCl kg⁻¹). Secondly, we propose a modification of the method for the simultaneous analysis of PST and TTX, with some minor changes in the solvent gradient, although the detection limit for TTX does not allow its use nowadays for regulatory purposes.

Development and validation of HPLC method with fluorometric detection for quantification of bisnaphthalimidopropyldiaminooctane in animal tissues following administration in polymeric nanoparticles

A simple, sensitive and specific high-performance liquid chromatography method for the quantification of bisnaphthalimidopropyldiaminooctane (BNIPDaoct), a potent anti-Leishmania compound, incorporated into poly(d,l-lactide-co-glycolic acid) (PLGA) nanoparticles was developed and validated toward bioanalysis application. Biological tissue extracts were injected into a reversed-phase monolithic column coupled to a fluorimetric detector (λexc=234nm, λem=394nm), using isocratic elution with aqueous buffer (acetic acid/acetate 0.10M, pH 4.5, 0.010M octanesulfonic acid) and acetonitrile, 60:40 (v/v) at a flow rate of 1.5mLmin(-1). The run time was 6min, with a BNIPDaoct retention time of 3.3min. Calibration curves were linear for BNIPDaoct concentrations ranging from 0.002 to 0.100μM. Matrix effects were observed and calibration curves were performed using the different organ (spleen, liver, kidney, heart and lung) extracts. The method was found to be specific, accurate (97.3-106.8% of nominal values) and precise for intra-day (RSD<1.9%) and inter-day assays (RSD<7.2%) in all matrices. Stability studies showed that BNIPDaoct was stable in all matrices after standing for 24h at room temperature (20°C) or in the autosampler, and after three freeze-thaw cycles. Mean recoveries of BNIPDaoct spiked in mice organs were >88.4%. The LOD and LOQ for biological matrices were ≤0.8 and ≤1.8nM, respectively, corresponding to values ≤4 and ≤9nmolg(-1) in mice organs. The method developed was successfully applied to biodistribution assessment following intravenous administration of BNIPDaoct in solution or incorporated in PLGA nanoparticles.

Quantitative aspects of calcium fluorimetry

Ca(2+) indicator dyes by necessity are Ca(2+) chelators, because it is the binding of Ca(2+) to dye molecules that induces the change in fluorescence on which the Ca(2+) signal is based. As chelators, once introduced into a cell, they contribute to cellular Ca(2+) buffering. It has been a question of much debate to what extent this added Ca(2+) buffer (exogenous Ca(2+) buffer) changes Ca(2+) homeostasis and the signals of interest. I discuss this problem here, emphasizing the distinction between the influence of the dyes on amplitudes (which may be not so severe) and on the dynamics of Ca(2+) signals (which may be drastic). Once the Ca(2+)-buffering action of dyes relative to intrinsic Ca(2+) buffers is understood for a given preparation, Ca(2+) dyes can be used as very versatile tools for studying both Ca(2+) concentrations and Ca(2+) fluxes. I describe in detail some of my own experiences in calibrating the indicator dye Fura-2. These refer exclusively to experiments in which the dye is loaded into the cell via a patch pipette because acetoxymethyl ester loading introduces problems that very often prohibit precise quantitative conclusions.

In situ measurements of phytoplankton fluorescence using low cost electronics

Chlorophyll a fluorometry has long been used as a method to study phytoplankton in the ocean. In situ fluorometry is used frequently in oceanography to provide depth-resolved estimates of phytoplankton biomass. However, the high price of commercially manufactured in situ fluorometers has made them unavailable to some individuals and institutions. Presented here is an investigation into building an in situ fluorometer using low cost electronics. The goal was to construct an easily reproducible in situ fluorometer from simple and widely available electronic components. The simplicity and modest cost of the sensor makes it valuable to students and professionals alike. Open source sharing of architecture and software will allow students to reconstruct and customize the sensor on a small budget. Research applications that require numerous in situ fluorometers or expendable fluorometers can also benefit from this study. The sensor costs US$150.00 and can be constructed with little to no previous experience. The sensor uses a blue LED to excite chlorophyll a and measures fluorescence using a silicon photodiode. The sensor is controlled by an Arduino microcontroller that also serves as a data logger.

Combined fluorimetric caspase 3/7 assay and bradford protein determination for assessment of polycation-mediated cytotoxicity

Cationic polyplexes and lipoplexes are widely used as artificial systems for nucleic acid delivery into the cells, but they can also induce cell death. Mechanistic understanding of cell toxicity and biological side effects of these cationic entities is essential for optimization strategies and design of safe and efficient nucleic acid delivery systems. Numerous methods are presently available to detect and delineate cytotoxicity and cell death-mediated signals in cell cultures. Activation of caspases is part of the classical apoptosis program and increased caspase activity is therefore a well-established hallmark of programmed cell death. Additional methods to monitor cell death-related signals must, however, also be carried out to fully define the type of cell toxicity in play. These may include methods that detect plasma membrane damage, loss of mitochondrial membrane potential, phosphatidylserine exposure, and cell morphological changes (e.g., membrane blebbing, nuclear changes, cytoplasmic swelling, cell rounding). Here we describe a 96-well format protocol for detection of capsase-3/7 activity in cell lysates, based on a fluorescent caspase-3 assay, combined with a method to simultaneously determine relative protein contents in the individual wells.

Optimization of variable fluorescence measurements of phytoplankton communities with cyanobacteria

Excitation-emission fluorescence matrices of phytoplankton communities were simulated from laboratory-grown algae and cyanobacteria cultures, to define the optical configurations of theoretical fluorometers that either minimize or maximize the representation of these phytoplankton groups in community variable fluorescence measurements. Excitation sources that match the photosystem II (PSII) action spectrum of cyanobacteria do not necessarily lead to equal representation of cyanobacteria in community fluorescence. In communities with an equal share of algae and cyanobacteria, inducible PSII fluorescence in algae can be retrieved from community fluorescence under blue excitation (450-470 nm) with high accuracy (R (2) = 1.00). The highest correlation between community and cyanobacterial variable fluorescence is obtained under orange-red excitation in the 590-650 nm range (R (2) = 0.54). Gaussian band decomposition reveals that in the presence of cyanobacteria, the emission detection slit must be narrow (up to 10 nm) and centred on PSII chlorophyll-a emission (~683 nm) to avoid severe dampening of the signal by weakly variable phycobilisomal fluorescence and non-variable photosystem I fluorescence. When these optimizations of the optical configuration of the fluorometer are followed, both cyanobacterial and algal cultures in nutrient replete exponential growth exhibit values of the maximum quantum yield of charge separation in PSII in the range of 0.65-0.7.

Long wavelength fluorescence lifetime standards for front-face fluorometry

With the increased development and use of fluorescence lifetime-based sensors, fiber optic sensors, fluorescence lifetime imaging microscopy (FLIM), and plate and array readers, , calibration standards are essential to ensure the proper function of these devices and accurate results. For many devices that utilize a "front face excitation" geometry where the excitation is nearly coaxial with the direction of emission, scattering-based lifetime standards are problematic and fluorescent lifetime standards are necessary. As more long wavelength (red and near-infrared) fluorophores are used to avoid background autofluorescence, the lack of lifetime standards in this wavelength range has only become more apparent . We describe an approach to developing lifetime standards in any wavelength range, based on Förster resonance energy transfer (FRET). These standards are bright, highly reproducible, have a broad decrease in observed lifetime, and an emission wavelength in the red to near infrared making them well suited for the laboratory and field applications as well. This basic approach can be extended to produce lifetime standards for other wavelength regimes.

Evaluation of the BAX gel and fluorometric systems for the detection of foodborne Salmonella

The present study compared the sensitivity of the BAX automated fluorometric and the recently discontinued BAX gel electrophoresis systems with a standard culture method to detect Salmonella in 333 high-moisture and 171 low-moisture foods. A total of 95 naturally contaminated foods, including 63 high-moisture and 32 low-moisture foods, were detected by the standard culture method. No contaminated samples were identified exclusively by the BAX systems. By means of the analytical protocol stipulated by the manufacturer, the BAX fluorometric system detected 36 (57.1%) and 29 (90.6%) of the contaminated high- and low-moisture foods, respectively. Similar results were obtained with the BAX gel electrophoresis system, which identified 40 (63.5%) and 26 (81.3%) of the contaminated high- and low-moisture foods. The rate of false-positive reactions with the BAX systems was low. Our results indicate that the low sensitivity of the BAX systems with high-moisture foods, notably raw meats and poultry products, was serovar-independent. The high levels of background microflora that commonly occur in raw meat and on fresh fruit and vegetable products, and the high successive dilutions of test materials for PCR analysis, suggestively undermined the sensitivity of the gel and the fluorometric BAX assays. The potential benefits of immunomagnetic separation of Salmonella in preenrichment cultures, of selective broth enrichment following preenrichment to markedly reduce levels of background microflora in PCR test materials, and the use of larger portions of test materials in PCR analyses should be investigated.

Flow-injection–electrochemical oxidation fluorimetry for determination of methotrexate

A novel fluorimetric model of on-line electrochemical oxidation for the determination of methotrexate (MTX) is described in this paper. The method was based on the oxidation of MTX to a highly fluorescent product, 2,4-diaminopteridine-6-carboxylic acid, by constant potential in the electrochemical oxidation flow cell. Stopped-flow techniques were employed. Under optimal conditions, the fluorescence intensity of 2,4-diaminopteridine-6-carboxylic acid was measured at excitation and emission wavelengths of 380 and 465 nm, respectively. The calibration graph was linear over concentrations of methotrexate in the range 2.0 x 10(-7)-1.0 x 10(-5) g/mL, with a detection limit of 5.2 x 10(-8) g/mL (3sigma). The method has been successfully applied to the determination of methotrexate in human urine samples and showed a percentage recovery in the range 94.3-102.5%.

New Fluorimetric Determination of Hemoglobin Used as a Substitute of Mimietic Peroxidase

Hemoglobin (Hb) could be used as a substitute of peroxidase in the catalytic oxidation of tetra-substituted amino aluminum phthalocyanine (TAA1Pc) by H2O2. We found that the fluorescence of TAA1Pc (a red-region fluorescent dye with a maximum excitation wavelength at 606 nm and a maximum emission wavelength at 673 nm) could significantly be quenched by H2O2 in the presence of Hb. The value of F0/F (where the relative fluorescence intensity of blank solution and that of the sample solution containing Hb were given by F0 and F, respectively) is linearly related to the concentration of Hb. Based on this, a novel fluorimetric method was developed for the determination of Hb in aqueous solution. Under optimal conditions, Hb could be determined in the concentration range of 5 x 10(-11) - 12 x 10(-8) mol L(-1) with a detection limit of 1.5 x10(-11) mol L(-1). The relative standard deviation of ten replicate measurements was 1.95% for solution containing 1 x10(-9 ) mol L(-1) Hb. The proposed method has been applied to the analysis of Hb in human blood and the results were in good agreement with those reported by a hospital laboratory. So this is a new, high sensitive and precise fluorescence quenching method to determine Hb.

Modifications to increase the efficiency of the fluorometric cycling assay for cyclic ADP-ribose

Cyclic ADP-ribose (cADPR) is an intracellular messenger that triggers the release of calcium ions from intracellular stores in a variety of cell types. The fluorometric cycling assay has become the preferred method for measuring cADPR due to its high level of sensitivity (in the sub-nanomolar range) and its use of commercially available reagents. Additionally, the assay is performed in multiwell plates, making it suitable for high throughput screening using a fluorescence plate reader. The findings reported in this paper present several problems that may be encountered during various stages of the assay, and provide solutions to these problems. Modifications to the assay address reduced recovery of sample and cADPR with removal of perchloric acid (PCA) using organic solvent, reduction in diaphorase activity with heat treatment, and effects on resorufin fluorescence by pH range. Using these modifications, we report an increase of approximately 15% in recovery of brain cADPR, and show that between-subject variability is greatly reduced. We hope that these observations will encourage more widespread application of this valuable assay.

Quantifying serum antibody in bird fanciers' hypersensitivity pneumonitis

Background

Detecting serum antibody against inhaled antigens is an important diagnostic adjunct for hypersensitivity pneumonitis (HP). We sought to validate a quantitative fluorimetric assay testing serum from bird fanciers.

Methods

Antibody activity was assessed in bird fanciers and control subjects using various avian antigens and serological methods, and the titer was compared with symptoms of HP.

Results

IgG antibody against pigeon serum antigens, quantified by fluorimetry, provided a good discriminator of disease. Levels below 10 mg/L were insignificant, and increasing titers were associated with disease. The assay was unaffected by total IgG, autoantibodies and antibody to dietary hen's egg antigens. Antigens from pigeon serum seem sufficient to recognize immune sensitivity to most common pet avian species. Decreasing antibody titers confirmed antigen avoidance.

Conclusion

Increasing antibody titer reflected the likelihood of HP, and decreasing titers confirmed antigen avoidance. Quantifying antibody was rapid and the increased sensitivity will improve the rate of false-negative reporting and obviate the need for invasive diagnostic procedures. Automated fluorimetry provides a method for the international standardization of HP serology thereby improving quality control and improving its suitability as a diagnostic adjunct.

[Review of the different methods for the evaluation of the in vitro antioxidant activity of wine and study of in vivo effects]

The aim of this paper is to evaluate the significance of these methods, as well as to correlate the antioxidant activity of wines with their phenolic profile, both in qualitative and quantitative terms. Red wines show higher antioxidant capacities than white ones and the magnitude of these differences depends on the method used. The antioxidant activity of wine can not be mainly ascribed to a particular phenolic compound, instead it is explained by the global interaction of all of them. To evaluate the influence of red wine consumption in the human organism, plasma antioxidant capacity has been frequently used as biomarker, and studies have shown that it increases after wine ingestion. We can conclude that it is necessary to use a battery of methods that provide different and complementary information to properly interpret the results. Phenolic compounds undergo metabolic transformations in the organism which modify their activities. In vivo assays do consider these changes. From the studies performed up to date we can conclude that acute ingestion of wine directly acts on plasma antioxidant capacity due to phenolic compounds and indirectly influences by means of changes on plasmatic concentration of endogenous antioxidants.

Imaging synaptic zinc: promises and perils

It is well established that some excitatory nerve terminals have high concentrations of Zn(2+) in their synaptic vesicles. For some time, it has been believed that synaptic Zn(2+) is released during neurotransmission and acts as a neuromodulator. Fluorescent Zn(2+) indicators that do not penetrate membranes offer the prospect of rendering the release of Zn(2+) visible. Here, I take a critical look at fluorimetric imaging experiments devised to determine whether Zn(2+) is released and show that they are particularly susceptible to artifacts. Moreover, I will argue that recent experiments suggest that, rather than being released, Zn(2+) is presented to the extracellular space firmly coordinated to presynaptic macromolecules.

Standardization of a fluorometric assay for measuring oxidative stress in irradiated cells

The present study was undertaken to standardize a dichlorofluorescein (DCF) assay for measurement of radiation-induced oxidation of dichlorofluorescin (DCFH) substrate in MCF-10 cells. This assay was highly sensitive and capable of detecting increased DCFH oxidation in the cells exposed to gamma radiation at doses as low as 1.5 cGy with linear dose-response curves. However, the slope of the dose-response curves varied considerably from one experiment to another and was influenced by the fluorescent substrate concentration and cell density. To make the assay reproducible so that results obtained from different experiments could be compared, a series of conversion factors and equations have been established to normalize the data for these variables. The results demonstrate that the DCF assay, as standardized in the present study, is highly reproducible with acceptable assay precision. The normalized results can be compared from one experiment to another even when the experiments were performed using different fluorescent substrate concentrations and/or cell densities. Since changes in DCFH oxidation may be related to changes that are indicative of oxidative stress in cells, this assay can be useful to quantify radiation-induced oxidative stress and evaluate the efficacy of antioxidant agents in protection against radiation-induced oxidative stress.

Hyperchylomicronaemia due to lipoprotein lipase deficiency as a cause of false-positive newborn screening for biotinidase deficiency

Two cases of molecular genetically proven lipoprotein lipase deficiency are reported. Both patients were detected owing to a false-positive neonatal screening test for biotinidase deficiency. We conclude that both the fluorimetric and the colorimetric screening tests for biotinidase deficiency used with dried blood samples are affected by severe hyperchylomicronaemia and that, most probably, severe plasma turbidity interferes with the assay.

Quantitative assay of total dsDNA with PicoGreen reagent and real-time fluorescent detection

We describe a quantitative assay of dsDNA based on real-time PCR measurement of fluorescence due to the interaction of PicoGreen dye with dsDNA. An aliquot of 1 to 5 ml of the sample is mixed with 45 ml of diluted PicoGreen reagent within an optical PCR tube. This is placed into the real-time apparatus set to read SYBR Green I dye at the end of three cycles of 94 degrees C for 30 s and 65 degrees C for 30 s. The averaged fluorescence value is converted into DNA amount using a calibration curve prepared with lambda-DNA standard. The calibration curve has a dynamic linear range from 0.20 to 50 ng and a standard deviation variability below 5.0%. In conclusion, this method allows reliable determinations on minimal amounts of DNA from biological samples and PCR products in clinical applications of molecular biology.

Determination of cellular H2O2 production

The detection of radical oxygen species (ROS) is central to the understanding of their role in signal transduction. ROS detection is based on the radical-dependent reduction of a compound with a measurable change in a chemical property. However, in vitro several of the compounds are reduced by several oxidants, which results in a lack of specificity when used to detect intracellular ROS. In contrast, by using methods that detect extracellular ROS, specificity can be corroborated by adding the appropriate competitor; for example, superoxide dismutase competes for superoxide, and catalase competes for H(2)O(2). In addition, because of the efficient activity of superoxide dismutases on superoxide and H(2)O(2) membrane permeability, determination of extracellular H(2)O(2) can detect all potential cellular sources of these ROS. In this protocol, extracellular H(2)O(2 )is measured as the limiting factor of peroxidase-mediated oxidation of homovanillic acid into a fluorescent dimer. The specificity of this reaction for H(2)O(2) is demonstrated by the addition of catalase as an H(2)O(2) scavenger. Because the assay detects small changes in fluorescence, it is highly sensitive. The high sensitivity and the specificity of this assay make it well suited to measure ROS in nonphagocytic cells where the ROS levels are in the low micromolar range. To further increase sensitivity, H(2)O(2) measurements are performed over time to ensure the detection of maximum response and to minimize the variability in response arising from cellular heterogeneity, an attribute of primary cultures.

Fluorometric assay using naphthylamide substrates for assessing novel venom peptidase activities

In the present study we examined the feasibility of using the fluorometry of naphthylamine derivatives for revealing peptidase activities in venoms of the snakes Bothrops jararaca, Bothrops alternatus, Bothrops atrox, Bothrops moojeni, Bothrops insularis, Crotalus durissus terrificus and Bitis arietans, of the scorpions Tityus serrulatus and Tityus bahiensis, and of the spiders Phoneutria nigriventer and Loxosceles intermedia. Neutral aminopeptidase (APN) and prolyl-dipeptidyl aminopeptidase IV (DPP IV) activities were presented in all snake venoms, with the highest levels in B. alternatus. Although all examined peptidase activities showed relatively low levels in arthropod venoms, basic aminopeptidase (APB) activity from P. nigriventer venom was the exception. Compared to the other peptidase activities, relatively high levels of acid aminopeptidase (APA) activity were restricted to B. arietans venom. B. arietans also exhibited a prominent content of APB activity which was lower in other venoms. Relatively low prolyl endopeptidase and proline iminopeptidase activities were, respectively, detectable only in T. bahiensis and B. insularis. Pyroglutamate aminopeptidase activity was undetectable in all venoms. All examined peptidase activities were undetectable in T. serrulatus venom. In this study, the specificities of a diverse array of peptidase activities from representative venoms were demonstrated for the first time, with a description of their distribution which may contribute to guiding further investigations. The expressive difference between snake and arthropod venoms was indicated by APN and DPP IV activities while APA and APB activities distinguished the venom of B. arietans from those of Brazilian snakes. The data reflected the relatively uniform qualitative distribution of the peptidase activities investigated, together with their unequal quantitative distribution, indicating the evolutionary divergence in the processing of peptides in these different venoms and/or the different abilities of the venoms examined to hydrolyze different peptides during envenomation.

A comparison of whole blood neutrophil chemiluminescence measured with cuvette and microtitre plate luminometers

Results obtained by measuring human whole blood neutrophil chemiluminescence (CL) using the BioOrbit 1251 cuvette luminometer and the Immunotech LM-01T microtitre plate luminometer are compared in this study. Opsonized zymosan, phorbol myristate acetate, N-formyl-Met-Leu-Phe and calcium ionophore A23187 were used as activators. The CL response of neutrophils to their stimulation with the individual types of activators tested was fully detectable using either type of the luminometers. The kinetic curves of CL activity obtained from both the cuvette and the microtitre plate luminometers had similar characteristics. The only insignificant difference observed when comparing the kinetic curves was in the rates of the CL reactions. The peak CL response of activated neutrophils was reached faster when using the luminometer BioOrbit 1251 than with the luminometer Immunotech LM-01T. A likely reason for this difference is the mode of transporting samples during the measurement, inducing different degrees of agitation. However, although this fact needs to be considered when interpreting results, both types of luminometer can be fully utilized in both research and clinical laboratories.

Quantitative measurements of mouse brain thrombin-like and thrombin inhibition activities

Thrombin-like enzymatic activity was measured in mouse brain homogenates and slices by cleavage of a peptide substrate, N-p-Tosyl-Gly-Pro-Arg-7-amido-4-methylcoumarin. The activity was localized mainly to white matter. However, it was not affected by specific thrombin inhibitors, and was found to represent the sum of at least two enzyme activities, a prolyl endopeptidase and an aminopeptidase. By specifically inhibiting this endogenous activity in combination with exogenously added thrombin, mouse brain tissue was shown to express a capacity of thrombin inhibitory activity equivalent to 0.2 mU thrombin/mg brain tissue. The present study offers a simple and reliable method for measuring total thrombin inhibitory activity in brain.

[Study on the determination of photophysical parameters of the non-protected fluid room temperature phosphorescence by lifetime method]

The heavy atom pertuber (HAP) can promote the intersystem crossing and the rates of radiative and nonradiative processes of triplet state, thus shortens the phosphorescence lifetime. The determination of kinetic parameters for luminescence process is very importance to understand luminescence process and the mechanisms of the heavy atom effects. In this paper, 1-chloronaphthalene and 1-bromonaphthalene were selected as the modal compounds, the possibility of determination of photophysical parameters for emission of nonprotected fluid room temperature phosphorescence (NP-RTP) by RTP lifetime method was studied based on the definition on the phosphorescence lifetime and relation with the concentration of HAP. The results obtained by two ways prove that the RTP lifetime method can be used to determine photophysical parameters for RTP emission.

Improved method for the fluorimetric detection of beta-D-galactosidase in water

A very convenient method to quantify coliform bacteria in water can probably be designed via the determination of the activity of the enzyme beta-D-galactosidase, whose natural occurrence is, apart from less frequently occurring aeromonads mainly restricted to this type of microorganisms. 4-methylumbelliferyl-beta-D-galactoside is used as substrate, which is hydrolyzed during the enzymatic reaction; the released 4-methylumbelliferone can be quantified fluorimetrically. In the present study the influence of various physical and chemical parameters on the determination is investigated and the experimental conditions are optimized. Most important entities are the pH value during hydrolysis, the presence of nutrients and co-factors in the sample, and the modification of the substrate. Statistical evaluation of the results obtained by changing single or multiple parameters reflects clearly their positive or negative influence on the enzyme activity. Thus, deliberate addition of surfactants, specific nutrients, salts and co-enzymes results in a significantly increased activity of beta-D-galactosidase towards the substrate, which can be advantageously exploited to increase the sensitivity of the analytical method together with a decrease of the detection limit. The influence of the parameters and the optimized conditions of the improved analytical methods are presented.

Counting of residual WBCs in WBC-reduced blood components: a multicenter evaluation of a microvolume fluorimeter by the United Kingdom National Blood Service

BACKGROUND

Implementation of universal WBC reduction of blood components means that automated analytical methods may be the only satisfactory way for production laboratories to meet increased testing requirements.

STUDY DESIGN AND METHODS

A multicenter study on the performance of a microvolume fluorimeter (IMAGN 2000, Becton Dickinson) was undertaken on 519 RBC, 353 platelet, and 27 fresh plasma units.

RESULTS

WBC counts for the RBC samples ranged from 0.02 to 6.94 x 10(6) per unit (mean, 0.57) as determined by FC and from 0.02 to 5.53 x 10(6) per unit (mean, 0.40) as determined by MVF with a mean FC bias of +0.15 x 10(6) WBCs per unit, and discrepancies outside the 95% limits of agreement were mainly associated with higher FC counts. The series of platelet samples showed means of 0.90 (range, 0.06-19.45) and 0.66 (range, 0.01-18.95) x 10(6) WBCs per unit for FC and MVF methods, respectively. FC and MVF results were in good agreement at low counts, although significant discrepancies were noted at higher counts. Overall, for the platelet units, there was a mean FC bias of +0.34 x 10(6) WBCs per unit. The intermethod agreement exceeded 99 percent for both types of blood component when the single (both UK and United States) decision point of 5.0 x 10(6) WBCs per unit was applied. The mean WBC counts for the 27 analyzed fresh plasma units were 61.8, 56.0, and 46.0 per microL by Nageotte hemocytometry, FC, and MVF, respectively.

CONCLUSIONS

This evaluation found that the level of intersite consistency for FC was relatively poor compared to that for MVF. The results nevertheless validated the broad equivalence of FC and MVF results for the current Council of Europe and UK/US decision points of <1.0 and <5.0 x 10(6) WBCs per unit.

A highly sensitive fluorimetric method for the determination of fluoride in biological material with Al3+-calcein complex

A highly sensitive fluorimetric method for the determination of fluoride was established. The method was based on quenching of the fluorescence of the Al3+-calcein complex in CCl3COOH-CH3COOK buffer solution by fluoride. The fluorescence emission was measured at lambdaex/lambdaem 480/503 nm, and the experimental variables and interference in this determination were studied. The linear calibration range was 0.8 ng/mL to 150 ng/mL and the detection limit was 0.2 ng/mL. The method was applied to determine fluoride in biological materials. The recovery was in the range of 96.3% to 104.7% and the relative standard deviation was 4.6%. The results obtained from the certified reference material by the present method agreed with the certified values.

Direct determination of 1-naphthoxylactic acid in biological fluids by non-protected fluid room temperature phosphorimetry

A selective and sensitive room-temperature phosphorimetric method for the direct determination of 1-naphthoxylactic acid (NA) in biological fluids is described. It is based on obtaining a phosphorescence signal from NA using TlNO3 as a heavy atom perturber and Na2SO3 as a deoxygenator without a protective medium. This technique is named non-protected room-temperature phosphorescence (NP-RTP), which allows to determine analytes in complex matrices without the need for tedious prior separation. Optimization of the operational conditions resulted in a detection limit for NA of 9.6 ng/mL according to the error propagation theory. The repeatability and standard deviation were also determined. This method was successfully applied to the determination of NA in urine and human serum.

Standardization of a fluorimetric assay for the determination of tissue angiotensin-converting enzyme activity in rats

The tripeptide Hip-His-Leu was used to standardize a fluorimetric method to measure tissue angiotensin-converting enzyme (ACE) activity in rats. The fluorescence of the o-phthaldialdehyde-His-Leu adduct was compared in the presence and absence of the homogenate (25 microl) to determine whether the homogenate from different tissues interfered with the fluorimetric determination of the His-Leu product. Only homogenates from lung and renal medulla and cortex showed significantly altered fluorescence intensity. To overcome this problem, the homogenate from these tissues were diluted 10 times with assay buffer. The specificity of the assay was demonstrated by the inhibition of ACE activity with 3 microM enalaprilat (MK-422). There was a linear relationship between product formation and incubation time for up to 90 min for homogenates of renal cortex and medulla and liver, for up to 60 min for ventricles and adrenals and for up to 30 min for the aorta, lung and atrium homogenates. In addition, there was a linear relationship between product formation and the amount of protein in the homogenates within the following range: lung, 30-600 microg; renal cortex and medulla, 40-400 microg; atrium and ventricles, 20-200 microg; adrenal, 20-100 microg; aorta, 5-100 microg; liver, 5-25 microg. No peptidase activity against the His-Leu product (31 nmol), assayed in borate buffer (BB), was detected in the different homogenates except the liver homogenate, which was inhibited by 0.1 mM rho-chloromercuribenzoic acid. ACE activity in BB was higher than in phosphate buffer (PB) due, at least in part, to a greater hydrolysis of the His-Leu product in PB. ACE activity of lung increased 20% when BB plus Triton was used. Enzyme activity was stable when the homogenates were stored at -20o or -70oC for at least 30 days. These results indicate a condition whereby ACE activity can be easily and efficiently assayed in rat tissue samples homogenized in BB using a fluorimetric method with Hip-His-Leu as a substrate.

Fluorimetric determination of methylmercury as an ion-association complex with rhodamine B in the presence of iodide

A fluorimetric method for the determination of methylmercury was established. The method was based on the formation of an ionic pair between iodide-methylmercury-rhodamine B in hydrochloric acid, which can be extracted with benzene. The fluorescence emission was measured at lambda(ex)/lambda(em) 575/590 nm, and the experimental variables and possible interference were studied. The linear calibration range was 4 x 10(-8) mol/L to approximately 5 x 10(-7) mol/L with a correlation coefficient of 0.9992. The detection limit was 1 x 10(-8) mol/L. The method was used to determine methylmercury in human hair. The recovery was in the range of 91% to 105% and the relative standard deviation was 2.8%. The results agreed with those obtained by gas chromatography with electron capture detection.

Diagnostic value of fluorometric assays in the evaluation of precocious puberty

To establish normative data and determine the value of fluorometric AutoDELFIA assays (Wallac Oy) in the investigation of precocious puberty, we determined serum levels of LH, FSH, testosterone, and estradiol under basal and GnRH-stimulated conditions in 277 normal subjects at various pubertal stages and in 77 patients with precocious puberty. A substantial overlap was observed in basal and GnRH-stimulated gonadotropin levels in normal individuals of both sexes with pubertal Tanner stages 1 and 2. The 95th percentile of the normal prepubertal population was the cut-off limit between prepubertal and pubertal levels. These limits were 0.6 IU/L in both sexes for basal LH, 9.6 IU/L in boys and 6.9 IU/L in girls for peak LH after GnRH stimulation, 19 ng/dL in boys for basal testosterone, and 13.6 pg/mL in girls for basal estradiol. Basal and peak LH exceeding these limits were considered positive tests for the diagnosis of gonadotropin-dependent precocious puberty. According to these criteria, the sensitivities of basal and peak LH for the latter diagnosis were 71.4% and 100% in boys, and 62.7% and 92.2% in girls. The specificity and positive predicted value were 100% in both sexes for basal and peak LH levels. The negative predicted values for basal and peak LH were 62.5% and 100% in boys, and 40.6% and 76.5% in girls. Basal and GnRH-stimulated FSH levels overlapped among the various pubertal stages in normal subjects and were, in general, not helpful in the differential diagnosis of precocious puberty. In conclusion, basal LH levels were sufficient to establish the diagnosis of gonadotropin-dependent precocious puberty in 71.4% of boys and 62.7% of girls. In the remaining patients, a GnRH stimulation test was still necessary to confirm this diagnosis. Finally, suppressed LH and FSH levels after GnRH stimulation indicate gonadotropin-independent sexual steroid production.

Rapid semi-quantitative fluorimetric determination of citrinin in fungal cultures isolated from cheese and cheese factories

A new rapid semi-quantitative fluorimetric assay for citrinin production testing in mould cultures has been developed. The chemical structure of the citrinin makes it a weak native fluorophore. This fluorescence can be strongly enhanced in an acidic environment. A standard curve where the concentration of HCl needed to show the yellow fluorescence signal of different concentrations of citrinin was established, thus providing a semi-quantitative method to prove the capacity of toxin production of fungal cultures. Two Penicillium strains from the Spanish National Collection of Type Cultures, were studied for the toxin production on YES broth at 25 degrees C for 21 d. The culture was assayed daily for the presence/absence and quantification of citrinin by adding the HCl concentration set, and also quantified by RP-HPLC as a confirmation procedure. Experiments demonstrate that 5 d are necessary to show the presence of citrinin. As an illustration, a total of 48 strains of Penicillium isolated from cheese and cheese factories were analysed with the proposed method.

Detection of iron-deficiency anemia in hospitalized patients by zinc protoporphyrin

The diagnostic value of zinc protoporphyrin (ZPP) as an indicator of iron-deficient anemia (IDA) in hospitalized patients is assessed in this study. ZPP was measured using an AVIV hematofluorometer with a coefficient of variation (CV) less than 5% and a recovery of greater than 97%. A reference range of 53-70 mu mol/mol heme was determined for ZPP in non-anemic patients in a hospital population. Hospitalized patients (221) with low hemoglobin (< 120 g/l) were evaluated for their iron status. ZPP and other anemia tests were performed. Macrocytic patients with mean corpuscular volume (MCV) greater than 98 fl) were excluded from the study. Seventy-four microcytic patients (MCV < 80 fl) were determined as having IDA according to a diagnostic algorithm. A distribution study of these microcytic patients showed that there was a significant overlap of values between the IDA and non-IDA patients for all serum anemia tests. A receiver-operator curve analysis revealed that ZPP has a relatively high degree of diagnostic efficiency better than iron and ferritin for this patient population. At a cutoff value > 170 mu mol/mol heme, ZPP has a sensitivity of 93% and a specificity of 90%. In addition, ZPP is also elevated in normocytic patients (MCV = 80-98 fl) with low ferritin values, who may have iron depletion. From these data, it is proposed that ZPP may be used as a screening tool for IDA in hospitalized patients.

Use of zinc protoporphyrin measured by the Protofluor-Z hematofluorometer in screening children for elevated blood lead levels

OBJECTIVE

To determine the usefulness of zinc protoporphyrin, as measured by the Helena Protofluor-Z hematofluorometer, for detecting elevated lead levels.

DESIGN

Observational, descriptive review of laboratory records from a university toxicology laboratory.

SETTING

Inner-city university pediatric clinic and two affiliated community clinics in Chicago, Ill.

PATIENTS

Seven hundred seventy-five children younger than 7 years with paired lead-zinc protoporphyrin results.

MEASUREMENTS/RESULTS

Fifty-six percent had lead levels of at least 0.48 mumol/L and 8% had lead levels of at least 1.21 mumol/L. The sensitivity, positive predictive value, and negative predictive value of a zinc protoporphyrin level of 70 mumol/mol of hemoglobin for detecting a lead level of 0.48 mumol/L were 42%, 66%, and 50%, respectively, and for a lead level of 1.21 mumol/L were 74%, 18%, and 97%, respectively. Receiver operating characteristic curves demonstrated that for detecting lead levels of 0.48 mumol/L with zinc protoporphyrin, the probability of a true-positive result is close to that of a false-positive one.

CONCLUSION

Zinc protoporphyrin is not a reliable screening test for detecting low blood lead levels.

Fluorescence assay of glucosylceramide glucosidase using NBD-cerebroside

A sensitive fluorometric assay for glucocerebroside beta-glucosidase [Dinur, T., Grabowski, G.A., Desnick, R.J., and Gatt, S. (1984) Anal. Biochem. 136, 223-234] has been reexamined. It was found that the lipids containing the NBD moiety (12-[N-methyl-N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)] used for standardization of the assay are light-sensitive and that the yield of fluorescent light is very sensitive to the composition of the solvent used in the fluorometric measurement. Some protection against fading could be obtained by adding a free-radical trapping agent, SlowFade. The fading of the free NBD-acid, when used for standardization, could be prevented by adding ethanol to the solvent, but this reduced the fluorescence yield. It is recommended that some of the fluorescent substrate be enzymatically hydrolyzed completely to NBD-ceramide, which can be utilized as the standard without the need to add ethanol. A warning about enzyme reaction rate stability with time is given, with a suggestion for ensuring constancy of activity.

Application of DNA techniques for identification using human dental pulp as a source of DNA

Dental pulp tissue could be obtained in most cases from materials obtained under experimental conditions and from forensic casework (air accidents, burned and putrefied bodies). Teeth extracted during dental treatment (n = 30) were stored for 6 weeks and 4 years at room temperature. In addition teeth (n = 10) extracted from jaw fragments that had been stored for 15 years at room temperature, and teeth extracted post mortem from actual identification cases (n = 8) were investigated. Following extraction from dental pulp tissue the DNA concentration was measured by fluorometry. The amount of DNA obtained from the dental pulp tissue of a single tooth varied from 6 micrograms to 50 micrograms DNA. In most cases high molecular weight DNA was still present although the major portion consisted of degraded DNA. Genomic dot blot hybridization for sex determination using the biotinylated repetitive DNA probe pHY 2.1 was performed and sex was correctly classified in all cases using 50-100 ng target DNA. PCR typing of the HLA-DQ alpha and ApoB 3' VNTR systems from dental pulp tissue DNA was in agreement with the results obtained from blood, bloodstains, or lung tissue. In addition, Southern blot analysis of selected samples using the single locus VNTR probe pYNH24 was successfully performed. In all cases the DNA recovered from dental pulp was unsuitable for multilocus probe analysis.

Comparison of the urinary excretion time profile of amodiaquine in albino rabbits by fluorometric and high-performance liquid chromatographic methods

Fluorometric and high-performance liquid chromatographic (HPLC) methods have been used to study the urinary excretion time profile of amodiaquine in albino rabbits after single oral (18.5 mg) and i.v. (9 mg) administration. There was no significant difference between the total mean values obtained for the two methods (P greater than 0.05). Although the HPLC method is more selective, one can still rely on the fluorometric method to measure urine concentrations of amodiaquine for therapeutic drug monitoring where toxicological conditions are not taken into consideration.

Histamine and the stomach: chemical histamine assays

Histamine assays in gastroduodenal tissues and body fluids are not an absolute objective of scientific interest but are related to the role of histamine in health and disease. Hence, the reliability of histamine assays has to be assessed in relation to this aim. Sensitivity and specificity of the chemical histamine assays are similar in tissues and body fluids. The modern developments in a fluorometric-fluoroenzymatic assay guarantee the highest sensitivity and specificity, especially by tests that monitor specificity in each single run of histamine determinations. Precision and accuracy of histamine measurement were especially investigated for the fluorometric assay. They included tests on the coefficient of variation over the whole concentration range, long-term precision with double-sample standard control charts, comparison of several methods for histamine assay including bioassay, and long-term accuracy with the use of Cusum charts. Finally, appropriate sample preparation, sample-taking, relevant body fluids and tissues, and the right time for sample-taking were evaluated in extended methodologic studies. Histamine assays are not just methods for a normal routine laboratory. Extended knowledge about histamine release and metabolism will be necessary to analyse data in this particular field with reasonable validity.

An interlaboratory comparison of control materials for use with hematofluorometers

This interlaboratory study was conducted to examine four erythrocyte protoporphyrin control materials from Aviv Biomedical, Helena Laboratories, Kaulson Laboratories, and the New York State Department of Health for use with hematofluorometers. Our principal aims were to monitor the stability of these materials at three different storage temperatures (room, refrigerator, freezer) and, where appropriate, to validate the manufacturer's target values. Measurements for the study were generated in three reference laboratories that used a total of five hematofluorometers, three from Environmental Science Associates and two from Aviv Biomedical. Each instrument was calibrated against a consensus acetic acid-ethyl acetate extraction procedure. We found the materials from Aviv to be the most stable, followed by the New York State material. However, the target values assigned by Aviv were not within the acceptable range determined by consensus. The target values assigned by Kaulson Laboratories for their materials did fall within the acceptable consensus range, but they were the least stable of the materials evaluated. The materials from Helena Laboratories were originally designed for use as calibrators with Helena's "ProtoFluor Z" hematofluorometer, which reports in different units. They were deemed unsuitable for use as control materials with the Aviv or Environmental Science Associates hematofluorometers because of the narrow range of values and the wide scatter of results.