Broadband Superabsorber Operating at 1500 °C Using Dielectric Bilayers

Many technological applications in photonics require devices to function reliably under extreme conditions, including high temperatures. To this end, materials and structures with thermally stable optical properties are indispensable. State-of-the-art thermal photonic devices based on nanostructures suffer from severe surface diffusion-induced degradation, and the operational temperatures are often restricted. Here, we report on a thermo-optically stable superabsorber composed of bilayer refractory dielectric materials. The device features an average absorptivity ∼95% over >500 nm bandwidth in the near-infrared regime, with minimal temperature dependence up to 1500 °C. Our results demonstrate an alternative pathway to achieve high-temperature thermo-optically stable photonic devices.

Toward Edge Engineering of Two-Dimensional Layered Transition-Metal Dichalcogenides by Chemical Vapor Deposition

The manipulation of edge configurations and structures in atomically-thin transition metal dichalcogenides (TMDs) for versatile functionalization has attracted intensive interest in recent years. The chemical vapor deposition (CVD) approach has shown promise for TMD edge engineering of atomic edge configurations (1H, 1T or 1T'-zigzag or armchair edges) as well as diverse edge morphologies (1D nanoribbons, 2D dendrites, 3D spirals, etc.). These edge-rich TMD layers offer versatile candidates for probing the physical and chemical properties and exploring potential applications in electronics, optoelectronics, catalysis, sensing, and quantum technologies. In this Review, we present an overview of the current state-of-the-art in the manipulation of TMD atomic edges and edge-rich structures using CVD. We highlight the vast range of distinct properties associated with these edge configurations and structures and provide insights into the opportunities afforded by such edge-functionalized crystals. The objective of this Review is to motivate further research and development efforts to use CVD as a scalable approach to harness the benefits of such crystal-edge engineering.

Photonic Integrated Circuit Based Temperature Sensor forOut-of-Autoclave Composite Parts Production Monitoring

The use of composite materials has seen widespread adoption in modern aerospace industry. This has been facilitated due to their favourable mechanical characteristics, namely, low weight and high stiffness and strength. For broader implementation of those materials though, the out-of-autoclave production processes have to be optimized, to allow for higher reliability of the parts produced as well as cost reduction and improved production speed. This optimization can be achieved by monitoring and controlling resin filling and curing cycles. Photonic Integrated Circuits (PICs), and, in particular, Silicon Photonics, owing to their fast response, small size, ability to operate at higher temperatures, immunity to electromagnetic interference, and compatibility with CMOS fabrication techniques, can offer sensing solutions fulfilling the requirements for composite material production using carbon fibres. In this paper, we demonstrate a passive optical temperature sensor, based on a 220 nm height Silicon-on-Insulator platform, embedded in a composite tool used for producing RTM-6 composite parts of high quality (for use in the aerospace industry). The design methodology of the photonic circuit as well as the experimental results and comparison with the industry standard thermocouples during a thermal cycling of the tool are presented. The optical sensor exhibits high sensitivity (85 pm/°C), high linearity (R2 = 0.944), and is compatible with the RTM-6 production process, operating up to 180 °C.

Chirality in Light-Matter Interaction

The scientific effort to control the interaction between light and matter has grown exponentially in the last 2 decades. This growth has been aided by the development of scientific and technological tools enabling the manipulation of light at deeply sub-wavelength scales, unlocking a large variety of novel phenomena spanning traditionally distant research areas. Here, the role of chirality in light-matter interactions is reviewed by providing a broad overview of its properties, materials, and applications. A perspective on future developments is highlighted, including the growing role of machine learning in designing advanced chiroptical materials to enhance and control light-matter interactions across several scales.

Circular Polarized Light Emission in Chiral Inorganic Nanomaterials

Chiral inorganic nanostructures strongly interact with photons changing their polarization state. The resulting circularly polarized light emission (CPLE) has cross-disciplinary importance for a variety of chemical/biological processes and is essential for development of chiral photonics. However, the polarization effects are often complex and their interpretation is dependent on the several structural parameters of the chiral nanostructure. CPLE in nanostructured media has multiple origins and several optical effects are typically convoluted into a single output. Analyzing CPLE data obtained for nanoclusters, nanoparticles, nanoassemblies, and nanocomposites from metals, chalcogenides, perovskite, and other nanostructures, it is shown here that there are several distinct groups of nanomaterials for which CPLE is dominated either by circularly polarized luminescence (CPL) or circularly polarized scattering (CPS); there are also many nanomaterials for which they are comparable. The following points are also demonstrated: 1) CPL and CPS contributions involve light-matter interactions at different structural levels; 2) contribution from CPS is especially strong for nanostructured microparticles, nanoassemblies, and composites; and 3) engineering of materials with strongly polarized light emission requires synergistic implementation of CPL and CPS effects. These findings are expected to guide development of CPLE materials in a variety of technological fields, including 3D displays, information storage, biosensors, optical spintronics, and biological probes.

Ultrafast Antisolvent Growth of Single-Crystal CsPbBr3 Microcavity for Whispering-Gallery-Mode Lasing

In recent years, all-inorganic cesium lead bromide (CsPbBr₃) perovskites have garnered considerable attention for their prospective applications in green photonics and optoelectronic devices. However, the development of efficient and economical methods to obtain high-quality micron-sized single-crystalline CsPbBr₃ microplatelets (MPs) has become a challenge. Here, we report the synthesis of CsPbBr₃ MPs on Si/SiO₂ substrate by optimizing the ultrafast antisolvent method (FAS). This technique is able to produce well-dispersed, uniformly sized, and morphologically regular tetragonal phase single crystals, which can give strong green emission at room temperature, with excellent stability and excitonic character. Moreover, the crystals demonstrated lasing with a whispering gallery mode with a low threshold. These results suggest that the single-crystalline CsPbBr₃ MPs synthesized by this method are of high optical quality, holding vast potential for future applications in photonic devices.

Photonic Artifacts in Ratiometric Luminescence Nanothermometry

Ongoing developments in science and technology require temperature measurements at increasingly higher spatial resolutions. Nanocrystals with temperature-sensitive luminescence are a popular thermometer for these applications offering high precision and remote read-out. Here, we demonstrate that ratiometric luminescence thermometry experiments may suffer from systematic errors in nanostructured environments. We place lanthanide-based luminescent nanothermometers at controlled distances of up to 600 nm from a Au surface. Although this geometry supports no absorption or scattering resonances, distortion of the emission spectra of the thermometers due to the modified density of optical states results in temperature read-out errors of up to 250 K. Our simple analytical model explains the effects of thermometer emission frequencies, experimental equipment, and sample properties on the magnitude of the errors. We discuss the relevance of our findings in several experimental scenarios. Such errors do not always occur, but they are expected in measurements near reflecting interfaces or scattering objects.

Photonic nanoparticles: emerging theranostics in cancer treatment

This review explores the potential of photonic nanoparticles for cancer theranostics. Photonic nanoparticles offer unique properties and photonics capabilities that make them promising materials for cancer treatment, particularly in the presence of near-infrared light. However, the size of the particles is crucial to their absorption of near-infrared light and therapeutic potential. The limitations and challenges associated with the clinical use of photonic nanoparticles, such as toxicity, immune system clearance, and targeted delivery to the tumor are also discussed. Researchers are investigating strategies such as surface modification, biodegradable nanoparticles, and targeting strategies to improve biocompatibility and accumulation in the tumor. Ongoing research suggests that photonic nanoparticles have potential for cancer theranostics, further investigation and development are necessary for clinical use.

Impact of averaging fNIRS regional coherence data when monitoring people with long term post-concussion symptoms

Significance

Functional near-infrared spectroscopy (fNIRS), with its measure of delta hemoglobin concentration, has shown promise as a monitoring tool for the functional assessment of neurological disorders and brain injury. Analysis of fNIRS data often involves averaging data from several channel pairs in a region. Although this greatly reduces the processing time, it is uncertain how it affects the ability to detect changes post injury.

Aim

We aimed to determine how averaging data within regions impacts the ability to differentiate between post-concussion and healthy controls.

Approach

We compared interhemispheric coherence data from 16 channel pairs across the left and right dorsolateral prefrontal cortex during a task and a rest period. We compared the statistical power for differentiating groups that was obtained when undertaking no averaging, vs. averaging data from 2, 4, or 8 source detector pairs.

Results

Coherence was significantly reduced in the concussion group compared with controls when no averaging was undertaken. Averaging all 8 channel pairs before undertaking the coherence analysis resulted in no group differences.

Conclusions

Averaging between fiber pairs may eliminate the ability to detect group differences. It is proposed that even adjacent fiber pairs may have unique information, so averaging must be done with caution when monitoring brain disorders or injury.

Emerging SiC Applications beyond Power Electronic Devices

In recent years, several new applications of SiC (both 4H and 3C polytypes) have been proposed in different papers. In this review, several of these emerging applications have been reported to show the development status, the main problems to be solved and the outlooks for these new devices. The use of SiC for high temperature applications in space, high temperature CMOS, high radiation hard detectors, new optical devices, high frequency MEMS, new devices with integrated 2D materials and biosensors have been extensively reviewed in this paper. The development of these new applications, at least for the 4H-SiC ones, has been favored by the strong improvement in SiC technology and in the material quality and price, due to the increasing market for power devices. However, at the same time, these new applications need the development of new processes and the improvement of material properties (high temperature packages, channel mobility and threshold voltage instability improvement, thick epitaxial layers, low defects, long carrier lifetime, low epitaxial doping). Instead, in the case of 3C-SiC applications, several new projects have developed material processes to obtain more performing MEMS, photonics and biomedical devices. Despite the good performance of these devices and the potential market, the further development of the material and of the specific processes and the lack of several SiC foundries for these applications are limiting further development in these fields.

Dielectrics for Two-Dimensional Transition-Metal Dichalcogenide Applications

Despite over a decade of intense research efforts, the full potential of two-dimensional transition-metal dichalcogenides continues to be limited by major challenges. The lack of compatible and scalable dielectric materials and integration techniques restrict device performances and their commercial applications. Conventional dielectric integration techniques for bulk semiconductors are difficult to adapt for atomically thin two-dimensional materials. This review provides a brief introduction into various common and emerging dielectric synthesis and integration techniques and discusses their applicability for 2D transition metal dichalcogenides. Dielectric integration for various applications is reviewed in subsequent sections including nanoelectronics, optoelectronics, flexible electronics, valleytronics, biosensing, quantum information processing, and quantum sensing. For each application, we introduce basic device working principles, discuss the specific dielectric requirements, review current progress, present key challenges, and offer insights into future prospects and opportunities.

Narrowband, Angle-Tunable, Helicity-Dependent Terahertz Emission from Nanowires of the Topological Dirac Semimetal Cd3As2

All-optical control of terahertz pulses is essential for the development of optoelectronic devices for next-generation quantum technologies. Despite substantial research in THz generation methods, polarization control remains difficult. Here, we demonstrate that by exploiting band structure topology, both helicity-dependent and helicity-independent THz emission can be generated from nanowires of the topological Dirac semimetal Cd₃As₂. We show that narrowband THz pulses can be generated at oblique incidence by driving the system with optical (1.55 eV) pulses with circular polarization. Varying the incident angle also provides control of the peak emission frequency, with peak frequencies spanning 0.21-1.40 THz as the angle is tuned from 15 to 45°. We therefore present Cd₃As₂ nanowires as a promising novel material platform for controllable terahertz emission.

Hierarchically Structured Deformation-Sensing Mechanochromic Pigments

Mechanochromic materials alter their color in response to mechanical force and are useful for both fundamental studies and practical applications. Several approaches are used to render polymers mechanochromic, but they generally suffer from limitations in sensing range, capacity to provide quantitative information, and their capability to enable broad and simple implementation. Here, is it reported that these problems can be overcome by combining photonic structures, which alter their reflection upon deformation, with covalent mechanophores, whose spectral properties change upon mechanically induced bond scission, in hierarchically structured mechanochromic pigments. This is achieved by synthesizing microspheres consisting of an elastic polymer with spiropyran-based cross-links and non-close-packed silica nanoparticles. A strain of less than 1% can be detected in a shift of the reflection band from the photonic structure, while the onset strain for the conversion of the spiropyran into fluorescent merocyanine ranges from 30% to 70%, creating a broad strain detection range. The two responses are tailorable and synergistic, permitting the activation strain for the mechanophore response to be tuned. The mechano-sensing photonic pigments are demonstrated to be readily incorporated into different polymeric materials of interest and quantitatively probe spatially heterogeneous deformations over a large strain range.

Constraining Continuous Topology Optimizations to Discrete Solutions for Photonic Applications

Photonic topology optimization is a technique used to find the permittivity distribution of a device that optimizes an electromagnetic figure-of-merit. Two common versions are used: continuous density-based optimizations that optimize a gray scale permittivity defined over a grid, and discrete level-set optimizations that optimize the shape of the material boundary of a device. In this work we present a method for constraining a continuous optimization such that it is guaranteed to converge to a discrete solution. This is done by inserting a constrained suboptimization with low computational overhead cost at each iteration of an overall gradient-based optimization. The technique adds only one hyperparameter with straightforward behavior to control the aggressiveness of binarization. Computational examples are provided to analyze the hyperparameter behavior, show this technique can be used in conjunction with projection filters, show the benefits of using this technique to provide a nearly discrete starting point for subsequent level-set optimization, and show that an additional hyperparameter can be introduced to control the overall material/void fraction. This method excels for problems where the electromagnetic figure-of-merit is majorly affected by the binarization requirement and situations where identifying suitable hyperparameter values becomes challenging with existing methods.

Photonic Crystal Enhanced Fluorescence: A Review on Design Strategies and Applications

Nanoscale fluorescence emitters are efficient for measuring biomolecular interactions, but their utility for applications requiring single-unit observations is constrained by the need for large numerical aperture objectives, fluorescence intermittency, and poor photon collection efficiency resulting from omnidirectional emission. Photonic crystal (PC) structures hold promise to address the aforementioned challenges in fluorescence enhancement. In this review, we provide a broad overview of PCs by explaining their structures, design strategies, fabrication techniques, and sensing principles. Furthermore, we discuss recent applications of PC-enhanced fluorescence-based biosensors incorporated with emerging technologies, including nucleic acids sensing, protein detection, and steroid monitoring. Finally, we discuss current challenges associated with PC-enhanced fluorescence and provide an outlook for fluorescence enhancement with photonic-plasmonics coupling and their promise for point-of-care biosensing as well monitoring analytes of biological and environmental relevance. The review presents the transdisciplinary applications of PCs in the broad arena of fluorescence spectroscopy with broad applications in photo-plasmonics, life science research, materials chemistry, cancer diagnostics, and internet of things.

Ultrafast One-Step Deposition Route to Fabricate Single-Crystal CsPbX3 (X = Cl, Cl/Br, Br, and Br/I) Photodetectors

Inorganic perovskites have received much attention due to their stability and high performance in luminescence, photoelectric conversion, and photodetection. However, perovskite optoelectronic devices prepared by the solution technique are still suffering from time-consuming and complex operations. In this paper, a single-crystal perovskite-based photodetector (PD) is prepared by very fast one-step deposition of synthesizing microplatelets (MPs) on the electrode directly. The saturated precursor is carefully optimized by adding appropriate antisolvent chlorobenzene (CB) to fabricate the MPs with their PL wavelength ranging from 418 to 600 nm. Furthermore, the PDs with a low dark current on order of nanoangstroms, high responsivity and detectivity of up to 10.7 A W^-1 and 10¹² Jones, respectively, and an ultrafast response rate featured by 278/287 μs (rise/decay time) are achieved. These all-inorganic perovskite PDs with a simple fabricating process and tunable detection wavelength meet the evolution tendency of PDs toward low cost and high performance, which is a high-profile strategy to realize high-performance perovskite PDs.

Membrane Targeted Azobenzene Drives Optical Modulation of Bacterial Membrane Potential

Recent studies have shown that bacterial membrane potential is dynamic and plays signaling roles. Yet, little is still known about the mechanisms of membrane potential dynamics regulation-owing to a scarcity of appropriate research tools. Optical modulation of bacterial membrane potential could fill this gap and provide a new approach for studying and controlling bacterial physiology and electrical signaling. Here, the authors show that a membrane-targeted azobenzene (Ziapin2) can be used to photo-modulate the membrane potential in cells of the Gram-positive bacterium Bacillus subtilis. It is found that upon exposure to blue-green light (λ = 470 nm), isomerization of Ziapin2 in the bacteria membrane induces hyperpolarization of the potential. To investigate the origin of this phenomenon, ion-channel-deletion strains and ion channel blockers are examined. The authors found that in presence of the chloride channel blocker idanyloxyacetic acid-94 (IAA-94) or in absence of KtrAB potassium transporter, the hyperpolarization response is attenuated. These results reveal that the Ziapin2 isomerization can induce ion channel opening in the bacterial membrane and suggest that Ziapin2 can be used for studying and controlling bacterial electrical signaling. This new optical tool could contribute to better understand various microbial phenomena, such as biofilm electric signaling and antimicrobial resistance.

Hexagonal Boron Nitride for Photonic Device Applications: A Review

Hexagonal boron nitride (hBN) has emerged as a key two-dimensional material. Its importance is linked to that of graphene because it provides an ideal substrate for graphene with minimal lattice mismatch and maintains its high carrier mobility. Moreover, hBN has unique properties in the deep ultraviolet (DUV) and infrared (IR) wavelength bands owing to its indirect bandgap structure and hyperbolic phonon polaritons (HPPs). This review examines the physical properties and applications of hBN-based photonic devices that operate in these bands. A brief background on BN is provided, and the theoretical background of the intrinsic nature of the indirect bandgap structure and HPPs is discussed. Subsequently, the development of DUV-based light-emitting diodes and photodetectors based on hBN's bandgap in the DUV wavelength band is reviewed. Thereafter, IR absorbers/emitters, hyperlenses, and surface-enhanced IR absorption microscopy applications using HPPs in the IR wavelength band are examined. Finally, future challenges related to hBN fabrication using chemical vapor deposition and techniques for transferring hBN to a substrate are discussed. Emerging techniques to control HPPs are also examined. This review is intended to assist researchers in both industry and academia in the design and development of unique hBN-based photonic devices operating in the DUV and IR wavelength regions.

Optimization of a Microwave Polarimeter for Astronomy with Optical Correlation and Detection

Cosmic Microwave Background (CMB) B-modes detection is the main focus of future CMB experiments because of the valuable information it contains, particularly to probe the physics of the very early universe. For this reason, we have developed an optimized polarimeter demonstrator sensitive to the 10-20 GHz band in which the signal received by each antenna is modulated into a Near Infrared (NIR) laser by a Mach-Zehnder modulator. Then, these modulated signals are optically correlated and detected using photonic back-end modules consisting of voltage-controlled phase shifters, a 90-degree optical hybrid, a pair of lenses, and an NIR camera. During laboratory tests, a 1/f-like noise signal related to the low phase stability of the demonstrator has been found experimentally. To solve this issue, we have developed a calibration method that allows us to remove this noise in an actual experiment, until obtaining the required accuracy level in the measurement of polarization.

Photonics-based treatments: Mechanisms and applications in oral infectious diseases

Infectious diseases remain a serious global challenge threatening human health. Oral infectious diseases, a major neglected global problem, not only affect people's lifestyles but also have an intimate association with systemic diseases. Antibiotic therapy is a common treatment. However, the emergence of new resistance problems hindered and enhanced the complication of the treatment. Currently, antimicrobial photodynamic therapy (aPDT) has long been the topic of intense interest due to the advantage of being minimally invasive, low toxicity, and high selectivity. aPDT is also becoming increasingly popular and applied in treating oral diseases such as tooth caries, pulpitis, periodontal diseases, peri-implantitis, and oral candidiasis. Photothermal therapy (PTT), another phototherapy, also plays an important role in resisting resistant bacterial and biofilm infections. In this mini-review, we summarize the latest advances in photonics-based treatments of oral infectious diseases. The whole review is divided into three main parts. The first part focuses on photonics-based antibacterial strategies and mechanisms. The second part presents applications for photonics-based treatments of oral infectious diseases. The last part discusses present problems in current materials and future perspectives.

The contribution of coherence field theory to a model of consciousness: electric currents, EM fields, and EM radiation in the brain

A paradigm in neuroscience is developing which views resonance as the phenomenon responsible for consciousness. Much progress is being made in the investigation of how resonance as oscillating flows within the brain's electric field might result in production of mind from matter. But it's mostly unknown how vibrations among features of matter such as nanoscale atomic structures and photonic waves may participate in forming the basic substance of first-person consciousness, meaning percepts such as colors, textures, sounds, thoughts, feelings et cetera. Initial evidence at the leading edge of quantum biology suggests that light and atoms combine to form synchronously resonating structures of contiguous energy which I have termed coherence fields. My hypothesis is that coherence fields as atomic nodes within expanses of integrating photonic waves are the fundamental unit of first-person percepts insofar as they arise from electromagnetic matter. A concept of quantum coherence is formulated based on a new phenomenology of matter's nanoscale properties, and this is shown to tie what we have thus far discovered of neural anatomy into a comprehensive model of how electrical impulses travel through neurons as electron currents driven by coherence at the quantum scale. Transmembrane electric fields generated by ionic currents, synaptic phase regulation, and perhaps further mechanisms have been hypothesized as responsible for local field potentials (LFP) oscillations. Some insights into how emergent, macroscopic waves in the brain's electric field may reciprocally impact LFP propagation to control arousal, attention, and volition are briefly discussed. Activation of neural tissue is closely linked to temperature variation, and it is hypothesized that this is not merely a waste byproduct but constitutes a signature of coherence field modulation, with photonic waves of a primarily infrared spectral range functioning as an interstitial medium of the basic percept field. A variety of possible routes to coherence field modulation are outlined that derive from the mechanisms of electric currents, EM fields, EM radiation, and entanglement. If future experimental designs continue to validate coherence field theory, this could set science on course to resolve the mind/body problem.

Optimization with photonic wave-based annealers

Many NP-hard combinatorial optimization (CO) problems can be cast as a quadratic unconstrained binary optimization model, which maps naturally to an Ising model. The final spin configuration in the Ising model can adiabatically arrive at a solution to a Hamiltonian, given a known set of interactions between spins. We enhance two photonic Ising machines (PIMs) and compare their performance against classical (Gurobi) and quantum (D-Wave) solvers. The temporal multiplexed coherent Ising machine (TMCIM) uses the bistable response of an electro-optic modulator to mimic the spin up and down states. We compare TMCIM performance on Max-cut problems. A spatial photonic Ising machine (SPIM) convolves the wavefront of a coherent laser beam with the pixel distribution of a spatial light modulator to adiabatically achieve a minimum energy configuration, and solve a number partitioning problem (NPP). Our computational results on Max-cut indicate that classical solvers are still a better choice, while our NPP results show that SPIM is better as the problem size increases. In both cases, connectivity in Ising hardware is crucial for performance. Our results also highlight the importance of better understanding which CO problems are most likely to benefit from which type of PIM. This article is part of the theme issue 'Quantum annealing and computation: challenges and perspectives'.

Hexagonal Boron Nitride for Next-Generation Photonics and Electronics

Hexagonal boron nitride (h-BN), an insulating 2D layered material, has recently attracted tremendous interest motivated by the extraordinary properties it shows across the fields of optoelectronics, quantum optics, and electronics, being exotic material platforms for various applications. At an early stage of h-BN research, it is explored as an ideal substrate and insulating layers for other 2D materials due to its atomically flat surface that is free of dangling bonds and charged impurities, and its high thermal conductivity. Recent discoveries of structural and optical properties of h-BN have expanded potential applications into emerging electronics and photonics fields. h-BN shows a very efficient deep-ultraviolet band-edge emission despite its indirect-bandgap nature, as well as stable room-temperature single-photon emission over a wide wavelength range, showing a great potential for next-generation photonics. In addition, h-BN is extensively being adopted as active media for low-energy electronics, including nonvolatile resistive switching memory, radio-frequency devices, and low-dielectric-constant materials for next-generation electronics.

Numerical Study of GaP Nanowires: Individual and Coupled Optical Waveguides and Resonant Phenomena

The development of novel nanophotonic devices and circuits necessitates studies of optical phenomena in nanoscale structures. Catalyzed semiconductor nanowires are known for their unique properties including high crystallinity and silicon compatibility making them the perfect platform for optoelectronics and nanophotonics. In this work, we explore numerically optical properties of gallium phosphide nanowires governed by their dimensions and study waveguiding, coupling between the two wires and resonant field confinement to unveil nanoscale phenomena paving the way for the fabrication of the integrated optical circuits. Photonic coupling between the two adjacent nanowires is studied in detail to demonstrate good tolerance of the coupling to the distance between the two aligned wires providing losses not exceeding 30% for the gap of 100 nm. The dependence of this coupling is investigated with the wires placed nearby varying their relative position. It is found that due to the resonant properties of a nanowire acting as a Fabry-Perot cavity, two coupled wires represent an attractive system for control over the optical signal processing governed by the signal interference. We explore size-dependent plasmonic behaviors of the metallic Ga nanoparticle enabling GaP nanowire as an antenna-waveguide hybrid system. We demonstrate numerically that variation of the structure dimensions allows the nearfield tailoring. As such, we explore GaP NWs as a versatile platform for integrated photonic circuits.

Passive Radiative Cooling of Silicon Solar Modules with Photonic Silica Microcylinders

Passive radiative cooling is a method to dissipate excess heat from a material by the spontaneous emission of infrared thermal radiation. For a solar cell, the challenge is to enhance PRC while retaining transparency for sunlight above the bandgap. Here, we design a hexagonal array of cylinders etched into the top surface of silica solar module glass to enhance passive radiative cooling. Multipolar Mie-like resonances in the cylinders are shown to cause antireflection effects in the infrared, which results in enhanced infrared emissivity. Using Fourier transform infrared spectrometry we measure the hemispherical reflectance of the fabricated structures and find the emissivity of the silica cylinder array in good correspondence with the simulated results. The microcylinder array increases the average emissivity between λ = 7.5-16 μm from 84.3% to 97.7%, without reducing visible light transmission.