P3HT-Based Polymer Solar Cells with 8.25% Efficiency Enabled by a Matched Molecular Acceptor and Smart Green-Solvent Processing Technology

A novel molecular acceptor of TrBTIC (2,7,12-tris((2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile-7-benzothiadiazole-2-)truxene) is designed by attaching the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile-benzothiadiazole (BTIC) electron-deficient unit to an electron-rich truxene core. TrBTIC has excellent solubility in common solvents and features good energy level matching with poly(3-hexylthiophene) (P3HT). Interestingly, P3HT can be readily dissolved in warm 1,2,4-trimethylbenzene (TMB), a green solvent, but crystallizes slowly with long-term aging in TMB at room temperature. A prephase separation can thus occur before active blend film deposition, and the separation degree can be easily controlled by varying the aging time. After 40 min of aging, the resulting active blend has the most appropriate phase separation with uniform nanowires, which forms favorable interpenetrating networks for exciton dissociation and charge transport. As a result, the device performance is improved from 6.62% to 8.25%. Excitingly, 8.25% is a new record for P3HT-based solar cells. The study not only provides an efficient nonfullerene acceptor for matching P3HT donors but also develops a promising processing technology to realize high-performance P3HT-based polymer solar cells with an efficiency over 8%.

Nanoscale Visualization and Multiscale Electrochemical Analysis of Conductive Polymer Electrodes

Conductive polymers are exceptionally promising for modular electrochemical applications including chemical sensors, bioelectronics, redox-flow batteries, and photoelectrochemical systems due to considerable synthetic tunability and ease of processing. Despite well-established structural heterogeneity in these systems, conventional macroscopic electroanalytical methods-specifically cyclic voltammetry-are typically used as the primary tool for structure-property elucidation. This work presents an alternative correlative multimicroscopy strategy. Data from laboratory and synchrotron-based microspectroscopies, including conducting-atomic force microscopy and synchrotron nanoscale infrared spectroscopy, are combined with potentiodynamic movies of electrochemical fluxes from scanning electrochemical cell microscopy (SECCM) to reveal the relationship between electrode structure and activity. A model conductive polymer electrode system of tailored heterogeneity is investigated, consisting of phase-segregated domains of poly(3-hexylthiophene) (P3HT) surrounded by contiguous regions of insulating poly(methyl methacrylate) (PMMA), representing an ultramicroelectrode array. Isolated domains of P3HT are shown to retain bulk-like chemical and electronic structure when blended with PMMA and possess approximately equivalent electron-transfer rate constants compared to pure P3HT electrodes. The nanoscale electrochemical data are used to model and predict multiscale electrochemical behavior, revealing that macroscopic cyclic voltammograms should be much more kinetically facile than observed experimentally. This indicates that parasitic resistances rather than redox kinetics play a dominant role in macroscopic measurements in these conductive polymer systems. SECCM further demonstrates that the ambient degradation of the P3HT electroactivity within P3HT/PMMA blends is spatially heterogeneous. This work serves as a roadmap for benchmarking the quality of conductive polymer films as electrodes, emphasizing the importance of nanoscale electrochemical measurements in understanding macroscopic properties.

P3HT Nanofibrils Thin-Film Transistors by Adsorbing Deposition in Suspension

A novel film preparation method utilizing polymer suspension, entitled adsorbing deposition in suspensions (ADS), has been proposed. The poly(3-hexylthiophene) (P3HT) toluene solution forms P3HT nanofibrils dispersed suspension by aging. P3HT nanofibrils are highly crystallized with sharp vibronic absorption spectra. By the ADS method, only P3HT nanofibrils in suspension can be deposited on the substrate surface without any disordered fraction from the dissolved P3HT in suspension. Formed ADS film contains only the nanostructured conjugated polymer. Fabricated polymer thin-film transistor (TFT) utilizing ADS P3HT film shows good TFT performances with low off current, narrow subthreshold swing and large on/off current ratio.

A Quarterthiophene-Based Dye as an Efficient Interface Modifier for Hybrid Titanium Dioxide/Poly(3-hexylthiophene)(P3HT) Solar Cells

This work focused on studying the influence of dyes, including a thiophene derivative dye with a cyanoacrylic acid group ((E)-2-cyano-3-(3′,3′′,3′′′-trihexyl-[2,2′:5′,2′′:5′′,2′′′- quaterthiophene]-5-yl) acrylicacid)(4T), on the photovoltaic performance of titanium dioxide (TiO₂)/poly(3-hexyl thiophene)(P3HT) solar cells. The insertion of dye at the interface improved the efficiency regardless of the dye used. However, 4T dye significantly improved the efficiency by a factor of three when compared to the corresponding control. This improvement is mainly due to an increase in short circuit current density (J_SC), which is consistent with higher hole-mobility reported in TiO₂/P3HT nanocomposite with 4T dye. Optical absorption data further revealed that 4T extended the spectral response of the TiO₂/P3HT nanocomposite, which could also enhance the J_SC. The reduced dark current upon dye insertion ensured the carrier recombination was controlled at the interface. This, in turn, increased the open circuit voltage. An optimized hybrid TiO₂/P3HT device with 4T dye as an interface modifier showed an average efficiency of over 2% under-simulated irradiation of 100 mWcm⁻² (1 sun) with an Air Mass 1.5 filter.

Energetic disorder in perovskite/polymer solar cells and its relationship with the interfacial carrier losses

Previous reports have observed a direct relationship between the polymer poly(3-hexylthiophene) molecular weight (MW) and the perovskite solar cell (PSC) efficiency. Herein, we analyse how the differences in MW and the differences in energetic disorder influence the interfacial carrier losses in the PSCs under operation conditions and explain the observed differences. This article is part of a discussion meeting issue 'Energy materials for a low carbon future'.

The Different Outcomes of Electrochemical Copolymerisation: 3-Hexylthiophene with Indole, Carbazole or Fluorene

Electrochemical polymerisation is reported to be a method for readily producing copolymers of various conjugated molecules. We employed this method for mixtures of indole, carbazole or fluorene with 3-hexylthiophene (HT), in order to obtain their soluble copolymers. Although polymer films were obtained, infrared (IR) and Raman investigations showed that instead of the expected linear copolymers, polyindole and polycarbazole N-substituted with HT, as well as a poly(3-hexylthiophene) (PHT)/polyfluorene blend were produced instead. Boron trifluoride diethyl etherate was also used in an attempt to promote copolymerisation, but the produced deposits were found to be highly degraded.

Controlled Self-Assembly of Conjugated Polymers via a Solvent Vapor Pre-Treatment for Use in Organic Field-Effect Transistors

A facile solution-processing strategy toward well-ordered one-dimensional nanostructures of conjugated polymers via a non-solvent vapor treatment was demonstrated, which resulted in enhancements to the charge transport characteristics of the polymers. The amount of crystalline poly(3-hexylthiophene) (P3HT) nanofibers was precisely controlled by simply varying the exposure time of solutions of P3HT solutions to non-solvent vapor. The effects of non-solvent vapor exposure on the molecular ordering and morphologies of the resultant P3HT films were systematically investigated using ultraviolet-visible (UV-vis) spectroscopy, polarized optical microscopy (POM), grazing incidence X-ray diffraction (GIXRD), and atomic force microscopy (AFM). The non-solvent vapor facilitates the π–π stacking in P3HT to minimize unfavorable interactions between the poor solvent molecules and P3HT chains. P3HT films deposited from the non-solvent vapor-treated P3HT solutions exhibited an approximately 5.6-fold improvement in charge carrier mobility as compared to that of pristine P3HT films (7.8 × 10⁻² cm² V⁻¹ s⁻¹ vs. 1.4 × 10⁻² cm² V⁻¹ s⁻¹). The robust and facile strategy presented herein would be applicable in various opto-electronics applications requiring precise control of the molecular assembly, such as organic photovoltaic cells, field-effect transistors, light-emitting diodes, and sensors.

Poly(3-hexylthiophene) Grafting and Molecular Dilution: Study of a Class of Conjugated Graft Copolymers

A type of graft copolymer based on polysiloxane and regioregular poly(3-hexylthiophene) (P3HT) has been synthesised and its properties have been studied alongside those of its parent conjugated polymer-regioregular P3HT. Electrochemical analysis has revealed more significant changes in conformation of the copolymer film than was observed for P3HT. UV-Vis-NIR spectroelectrochemical investigation provided evidence of improved doping reversibility of the copolymer, despite its marginally increased band gap, as also confirmed by electroconductometric analysis. Evidence has been shown, indicating that polaron mobilities in both P3HT and the copolymer are higher than those of bipolaronic charge carriers, even though both systems exhibit standard doping/dedoping patterns. The grafted copolymer was tested in bulk heterojunction solar cells. Preliminary studies show a great potential of these polymers for application in photovoltaics. Power conversion efficiency of up to 2.46% was achieved despite the dilution of the P3HT chains in the copolymer.

Large-Scale Alignment of Polymer Semiconductor Nanowires for Efficient Charge Transport via Controlled Evaporation of Confined Fluids

Long-range alignment of conjugated polymers is as critical as polymer chain packing for achieving efficient charge transport in polymer thin films used in electronic and optoelectronic devices. Here, the present study reports a facile, scalable strategy that enables the deposition of macroscopically aligned polymer semiconductor nanowire (NW)-array films with highly enhanced charge carrier mobility, using a modified controlled evaporative self-assembly (MCESA) technique. Organic field-effect transistors (OFETs) based on highly oriented poly(3-hexylthiophene) (P3HT)-NW films exhibit more than 10-fold enhancement of carrier mobility, with the highest mobility of 0.13 cm² V^-1 s^-1, compared to the OFETs based on pristine P3HT films. Significantly, large-area aligned P3HT NW-films, which are deposited over 12 arrays of transistors on a 4 in. wafer by an MCESA coating, result in lower device performance variation (i.e., standard deviation ≈ ±0.0172 (16%) cm² V^-1 s^-1) as well as an excellent average device performance (i.e., average charge mobility ≈ 0.11 cm² V^-1 s^-1), compared to those obtained using the conventional CESA coating, overcoming a critical challenge in the field of OFETs.

Investigation of the Effects of Non-Conjugated Co-Grafts on the Spectroelectrochemical and Photovoltaic Properties of Novel Conjugated Graft Copolymers Based on Poly(3-hexylthiophene)

A new type of polysiloxane copolymers, with conjugated–regioregular poly(3-hexylthiophene) (P3HT) and non-conjugated-poly(ethylene glycol) (PEG)-grafts have been synthesised, and their properties have been studied alongside those of the parent conjugated polymer (P3HT). Spectroelectrochemical and conductometric analyses revealed an early rise of the conductance of the polymers. Once spectral changes begin taking place, the conductance is stable, implying a loss of mobility of charge carriers, even though standard doping/dedoping patterns are observed. Prototype bulk heterojunction solar cells have been fabricated, based on P3HT/[6,6]-Phenyl-C61-butyric acid methyl ester (PCBM), as well as by substituting P3HT for each of the copolymers. The prototype solar cells achieved PCEs of up to 2.11%. This is one of the highest reported power conversion efficiency (PCE) for devices based on P3HT with low average molecular weight M_n = 12 kDa. Strong correlation between the structure of the copolymer and its photovoltaic performance was found. Elongation of PEG copolymer chain and the use of methyl group instead of terminal hydroxyl groups significantly improved photovoltaic performance.

Hybrid density functional study on the electronic structures and properties of P3HT-PbS and P3HT-CdS hybrid interface for photovoltaic applications

The efficiency of charge transport mainly depends on the interfacial energy level alignment between the conjugated polymer and the inorganic substrate. It provides an accurate understanding, predicting as well as controlling the optimal power conversion efficiency of various type of hybrid photovoltaic systems. In this article, we use hybrid functional (HSE06) to study the electronic structures and properties at the interface of poly(3-hexylthiophene)(P3HT)/CdS and P3HT/PbS for solar cell applications. We found that the dangling bonds at the inorganic surface introduce in-gap states and greatly reduce the device performance. We used pseudo-hydrogen atoms as the passivation agent to remove the dangling bonds and eliminate the in-gap states to construct the energy alignment at the hybrid interface. The calculated interfacial density of states reveal a better performance in P3HT/CdS, compared to P3HT/PbS. P3HT/CdS possesses a LUMO_P3HT /CBM_CdS and HOMO_P3HT /VBM_CdS energy offset large enough for sufficient exciton separation across the interface and prevents charge recombination. In contrast, the reason for low power conversion efficiency in P3HT/PbS lies on its HOMO_P3HT /VBM_PbS offset which is too small to break the exciton binding energy for charge separation. Moreover, we reported the dependency of the energy level alignment and open circuit voltage on the interfacial molecular orientations. Our DFT calculation can be used to predict candidate materials for the development of efficiency optoelectronic devices. © 2018 Wiley Periodicals, Inc.

A scanning probe microscopy study of nanostructured TiO2/poly(3-hexylthiophene) hybrid heterojunctions for photovoltaic applications

The nanoscale morphology of photoactive hybrid heterojunctions plays a key role in the performances of hybrid solar cells. In this work, the heterojunctions consist of a nanocolumnar TiO₂ surface covalently grafted with a monolayer of poly(3-hexylthiophene) (P3HT) functionalized with carboxylic groups (-COOH). Through a joint analysis of the photovoltaic properties at the nanoscale by photoconductive-AFM (PC-AFM) and surface photovoltage imaging, we investigated the physical mechanisms taking place locally during the photovoltaic process and the correlation to the nanoscale morphology. A down-shift of the vacuum level of the TiO₂ surface upon grafting was measured by Kelvin probe force microscopy (KPFM), evidencing the formation of a dipole at the TiO₂/P3HT-COOH interface. Upon in situ illumination, a positive photovoltage was observed as a result of the accumulation of photogenerated holes in the P3HT layer. A positive photocurrent was recorded in PC-AFM measurements, whose spatial mapping was interpreted consistently with the corresponding KPFM analysis, offering a correlated analysis of interest from both a theoretical and material design perspective.

Understanding the Intrinsic Carrier Transport in Highly Oriented Poly(3-hexylthiophene): Effect of Side Chain Regioregularity

The fundamental understanding of the influence of molecular structure on the carrier transport properties in the field of organic thermoelectrics (OTEs) is a big challenge since the carrier transport behavior in conducting polymers reveals average properties contributed from all carrier transport channels, including those through intra-chain, inter-chain, inter-grain, and hopping between disordered localized sites. Here, combining molecular dynamics simulations and experiments, we investigated the carrier transport properties of doped highly oriented poly(3-hexylthiophene) (P3HT) films with different side-chain regioregularity. It is demonstrated that the substitution of side chains can not only take effect on the carrier transport edge, but also on the dimensionality of the transport paths and as a result, on the carrier mobility. Conductive atomic force microscopy (C-AFM) study as well as temperature-dependent measurements of the electrical conductivity clearly showed ordered local current paths in the regular side chain P3HT films, while random paths prevailed in the irregular sample. Regular side chain substitution can be activated more easily and favors one-dimensional transport along the backbone chain direction, while the irregular sample presents the three-dimensional electron hopping behavior. As a consequence, the regular side chain P3HT samples demonstrated high carrier mobility of 2.9 ± 0.3 cm²/V·s, which is more than one order of magnitude higher than that in irregular side chain P3HT films, resulting in a maximum thermoelectric (TE) power factor of 39.1 ± 2.5 μW/mK² at room temperature. These findings would formulate design rules for organic semiconductors based on these complex systems, and especially assist in the design of high performance OTE polymers.

Solvent Additive-Assisted Anisotropic Assembly and Enhanced Charge Transport of π-Conjugated Polymer Thin Films

Charge transport in π-conjugated polymer films involves π-π interactions within or between polymer chains. Here, we demonstrate a facile solution processing strategy that provides enhanced intra- and interchain π-π interactions of the resultant polymer films using a good solvent additive with low volatility. These increased interactions result in enhanced charge transport properties. The effect of the good solvent additive on the intra- and intermolecular interactions, morphologies, and charge transport properties of poly(3-hexylthiophene) (P3HT) films is systematically investigated. We found that the good solvent additive facilitates the self-assembly of P3HT chains into crystalline fibrillar nanostructures by extending the solvent drying time during thin-film formation. As compared to the prior approach using a nonsolvent additive with low volatility, the solvent blend system containing a good solvent additive results in enhanced charge transport in P3HT organic field-effect transistor (OFET) devices [from ca. 1.7 × 10^-2 to ca. 8.2 × 10^-2 cm² V^-1 s^-1 for dichlorobenzene (DCB) versus 4.4 × 10^-2 cm² V^-1 s^-1 for acetonitrile]. The mobility appears to be maximized over a broad spectrum of additive concentrations (1-7 vol %), indicative of a wide processing window. Detailed analysis results regarding the charge injection and transport characteristics of the OFET devices reveal that a high-boiling-point solvent additive decreases both the contact resistance ( R_c) and channel resistance ( R_ch), contributing to the mobility enhancement of the devices. Finally, the platform presented here is proven to be applicable to alternative good solvent additives with low volatility, such as chlorobenzene (CB) and trichlorobenzene (TCB). Specifically, the mobility enhancement of the resultant P3HT films increases in the order CB (bp 131 °C) < DCB (bp 180 °C) < TCB (bp 214 °C), suggesting that solvent additives with higher boiling points provide resultant films with preferable molecular ordering and morphologies for efficient charge transport.

Fabrication of a P3HT-ZnO Nanowires Gas Sensor Detecting Ammonia Gas

In this study, an organic-inorganic semiconductor gas sensor was fabricated to detect ammonia gas. An inorganic semiconductor was a zinc oxide (ZnO) nanowire array produced by atomic layer deposition (ALD) while an organic material was a p-type semiconductor, poly(3-hexylthiophene) (P3HT). P3HT was suitable for the gas sensing application due to its high hole mobility, good stability, and good electrical conductivity. In this work, P3HT was coated on the zinc oxide nanowires by the spin coating to form an organic-inorganic heterogeneous interface of the gas sensor for detecting ammonia gas. The thicknesses of the P3HT were around 462 nm, 397 nm, and 277 nm when the speeds of the spin coating were 4000 rpm, 5000 rpm, and 6000 rpm, respectively. The electrical properties and sensing characteristics of the gas sensing device at room temperature were evaluated by Hall effect measurement and the sensitivity of detecting ammonia gas. The results of Hall effect measurement for the P3HT-ZnO nanowires semiconductor with 462 nm P3HT film showed that the carrier concentration and the mobility were 2.7 × 10¹⁹ cm⁻³ and 24.7 cm²∙V⁻¹∙s⁻¹ respectively. The gas sensing device prepared by the P3HT-ZnO nanowires semiconductor had better sensitivity than the device composed of the ZnO film and P3HT film. Additionally, this gas sensing device could reach a maximum sensitivity around 11.58 per ppm.

High-Efficiency Perovskite Solar Cell Based on Poly(3-Hexylthiophene): Influence of Molecular Weight and Mesoscopic Scaffold Layer

Here, we investigated the effect of the molecular weight (MW) of poly 3-hexylthiophene (P3HT) hole-transport material on the performance of perovskite solar cells (PSCs). We found that by increasing the MW the photovoltaic performances of the cells are enhanced leading to an improvement of the overall efficiency. P3HT-based PSCs with a MW of 124 kDa can achieve an overall average efficiency of 16.2 %, double with respect to the ones with a MW of 44 kDa. Opposite to spiro-OMeTAD-based PSCs, the photovoltaic parameters of the P3HT-based devices are enhanced by increasing the mesoporous TiO₂ layer thickness from 250 to 500 nm. Moreover, for a titania scaffold layer thickness of 500 nm, the efficiency of P3HT-based PSCs with high MW is larger than the spiro-OMeTAD based PSCs with the same scaffold layer thickness. Recombination reactions of the devices were also investigated by voltage decay and electrochemical impedance spectroscopy. We found that the relationship between P3HT MW and cell performance is related to the reduction of charge recombination and to the increase of the P3HT light absorption by increasing the MW.

Charge Transport in Intermixed Regions of All-Polymer Solar Cells Studied by Conductive Atomic Force Microscopy

Charge transport in intermixed regions of all-polymer solar cells based on a blend of poly(3-hexylthiophene) (P3HT; electron donor) with poly[2,7-(9,9-didodecylfluorene)-alt-5,5-(4',7'-bis(2-thienyl)-2',1',3'-benzothiadiazole)] (PF12TBT; electron acceptor) was studied by conductive atomic force microscopy (C-AFM). For a blend film fabricated from a chlorobenzene solution, intermixed regions were detected between the P3HT-rich and PF12TBT-rich domains. The overall hole current in the intermixed regions remained almost constant, both before and after thermal annealing at 80 °C, but it increased in the P3HT-rich domains. For a blend film fabricated from a chloroform solution, the entire observed area constituted an intermixed region, both before and after thermal annealing. The overall hole current in this film was significantly improved following thermal annealing at 120 °C. These finely mixed structures with efficient charge transport yielded a maximum power conversion efficiency of 3.5%. The local charge-transport properties in the intermixed region, as observed via C-AFM, was found to be closely related to the photovoltaic properties, rather than the bulk-averaged properties or topological features.

Stereoregular Brush Polymers and Graft Copolymers by Chiral Zirconocene-Mediated Coordination Polymerization of P3HT Macromers

Two poly(3-hexylthiophene) (P3HT) macromers containing a donor polymer with a polymerizable methacrylate (MA) end group, P3HT-CH₂-MA and P3HT-(CH₂)₂-MA, have been synthesized, and P3HT-(CH₂)₂-MA has been successfully homopolymerized and copolymerized with methyl methacrylate (MMA) into stereoregular brush polymers and graft copolymers, respectively, using chiral ansa-zirconocene catalysts. Macromer P3HT-CH₂-MA is too sterically hindered to polymerize by the current Zr catalysts, but macromer P3HT-(CH₂)₂-MA is readily polymerizable via either homopolymerization or copolymerization with MMA in a stereospecific fashion with both C₂-ligated zirconocenium catalyst 1 and Cs-ligated zirconocenium catalyst 2. Thus, highly isotactic (with mm% ≥ 92%) and syndiotactic (with rr% ≥ 93%) brush polymers, it-PMA-g-P3HT and st-PMA-g-P3HT, as well as well-defined stereoregular graft copolymers with different grafted P3HT densities, it-P(M)MA-g-P3HT and st-P(M)MA-g-P3HT, have been synthesized using this controlled coordination-addition polymerization system under ambient conditions. These stereoregular brush polymers and graft copolymers exhibit both thermal (glass and melting) transitions with Tg and Tm values corresponding to transitions within the stereoregular P(M)MA and crystalline P3HT domains. Acceptor molecules such as C60 can be effectively encapsulated inside the helical cavity of st-P(M)MA-g-P3HT to form a unique supramolecular helical crystalline complex, thus offering a novel strategy to control the donor/acceptor solar cell domain morphology.

Ethylene Detection Based on Organic Field-Effect Transistors With Porogen and Palladium Particle Receptor Enhancements

Ethylene sensing is a highly challenging problem for the horticulture industry because of the limited physiochemical reactivity of ethylene. Ethylene plays a very important role in the fruit life cycle and has a significant role in determining the shelf life of fruits. Limited ethylene monitoring capability results in huge losses to the horticulture industry as fruits may spoil before they reach the consumer, or they may not ripen properly. Herein we present a poly(3-hexylthiophene-2,5-diyl) (P3HT)-based organic field effect transistor as a sensing platform for ethylene with sensitivity of 25 ppm V/V. To achieve this response, we used N-(tert-Butoxy-carbonyloxy)-phthalimide and palladium particles as additives to the P3HT film. N-(tert-Butoxy-carbonyloxy)-phthalimide is used to increase the porosity of the P3HT, thereby increasing the overall sensor surface area, whereas the palladium (<1 μm diameter) particles are used as receptors for ethylene molecules in order to further enhance the sensitivity of the sensor platform. Both modifications give statistically significant sensitivity increases over pure P3HT. The sensor response is reversible and is also highly selective for ethylene compared to common solvent vapors.

Investigation of the Effect of Thermal Annealing on Poly(3-hexylthiophene) Nanofibers by Scanning Probe Microscopy: From Single-Chain Conformation and Assembly Behavior to the Interfacial Interactions with Graphene Oxide

Poly(3-hexylthiophene) (P3HT) has been widely used in devices owing to its excellent properties and structural features. However, devices based on pure P3HT have not exhibited high performance. Strategies, such as thermal annealing and surface doping, have been used to improve the electrical properties of P3HT. In this work, different from previous studies, the effect of thermal annealing on P3HT nanofibers are examined, ranging from the single polymer chain conformation to chain packing, and the interfacial interactions with graphene oxide (GO) at nanoscale dimensions, by using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). High-resolution STM images directly show the conformational changes of single polymer chains after thermal annealing. The morphology of P3HT nanofibers and the surface potential changes of the P3HT nanofibers and GO is further investigated by AFM and KPFM at the nanoscale, which demonstrate that the surface potentials of P3HT decrease, whereas that of GO increases after thermal annealing. All of the results demonstrate the stronger interfacial interactions between P3HT and GO occur after thermal treatments due to the changes in P3HT chain conformation and packing order.

Parasitic Capacitance Effect on Dynamic Performance of Aerosol-Jet-Printed Sub 2 V Poly(3-hexylthiophene) Electrolyte-Gated Transistors

Printed, low-voltage poly(3-hexylthiophene) (P3HT) electrolyte-gated transistors (EGTs) have favorable quasi-static characteristics, including sub 2 V operation, carrier mobility (μ) of 1 cm²/(V s), ON/OFF current ratio of 10⁶, and static leakage current density of 10^-6 A/cm². Here we study the dynamic performance of P3HT EGTs in which the semiconductor, dielectric, and gate electrode were deposited using aerosol-jet printing; the source and drain electrodes were patterned by conventional microlithography. With a source-to-drain separation of 2.5 μm, the highest theoretical achievable switching frequency is ∼10 MHz, assuming the movement of charge through the semiconductor is the limiting step. However, the measured maximum switching frequency of P3HT EGTs to date is ∼1 kHz, implying that another process is slowing the response. By systematically varying the device geometry, we show that the frequency is limited by the capacitance between the gate and drain (i.e., parasitic capacitance). The traditional scaling of switching time with the square of channel length (L) does not hold for P3HT EGTs. Rather, minimizing the size of the drain electrode increases the maximum switching speed. We achieve 10 kHz for P3HT EGTs with source/drain electrode dimensions of 2.5 μm × 50 μm and channel dimensions of 2.5 μm × 50 μm. Further improvements will require additional shrinkage of electrode dimensions as well as consideration of other factors such as ion gel thickness and carrier mobility.

Controlled Growth of Well-Defined Conjugated Polymers from the Surfaces of Multiwalled Carbon Nanotubes: Photoresponse Enhancement via Charge Separation

The installation of heterojunctions on the surfaces of carbon nanotubes (CNTs) is an effective method for promoting the charge separation processes needed for CNT-based electronics and optoelectronics applications. Conjugated polymers are proven state-of-the-art candidates for modifying the surfaces of CNTs. However, all previous attempts to incorporate conjugated polymers to CNTs resulted in unordered interfaces. Herein we show that well-defined chains of regioregular poly(3-hexylthiophene) (P3HT) were successfully grown from the surfaces of multiwalled CNTs (MWNTs) using surface-initiated Kumada catalyst-transfer polycondensation. The polymerization was found to proceed in a controlled manner as chains of tunable lengths were prepared through variation of the initial monomer-to-initiator ratio. Moreover, it was determined that large-diameter MWNTs afforded highly ordered P3HT aggregates, which exhibited a markedly bathochromically shifted optical absorption due to a high grafting density induced planarization of the polymer chains. Using ultrafast spectroscopy, the heterojunctions formed between the MWNTs and P3HT were shown to effectively overcome the binding energy of excitons, leading to photoinduced electron transfer from P3HT to MWNTs. Finally, when used as prototype devices, the individual MWNT-g-P3HT core-shell structures exhibited excellent photoresponses under a low illumination density.

Toward Uniformly Dispersed Battery Electrode Composite Materials: Characteristics and Performance

Battery electrodes are complex mesoscale systems comprised of electroactive components, conductive additives, and binders. In this report, methods for processing electrodes with dispersion of the components are described. To investigate the degree of material dispersion, a spin-coating technique was adopted to provide a thin, uniform layer that enabled observation of the morphology. Distinct differences in the distribution profile of the electrode components arising from individual materials physical affinities were readily identified. Hansen solubility parameter (HSP) analysis revealed pertinent surface interactions associated with materials dispersivity. Further studies demonstrated that HSPs can provide an effective strategy to identify surface modification approaches for improved dispersions of battery electrode materials. Specifically, introduction of surfactantlike functionality such as oleic acid (OA) capping and P3HT-conjugated polymer wrapping on the surface of nanomaterials significantly enhanced material dispersity over the composite electrode. The approach to the surface treatment on the basis of HSP study can facilitate design of composite electrodes with uniformly dispersed morphology and may contribute to enhancing their electrical and electrochemical behaviors. The conductivity of the composites and their electrochemical performance was also characterized. The study illustrates the importance of considering electronic conductivity, electron transfer, and ion transport in the design of environments incorporating active nanomaterials.

A Physicochemical Approach Toward Extending Conjugation and the Ordering of Solution-Processable Semiconducting Polymers

Poly(3-hexylthiophene)s (P3HTs) were synthesized with a well-controlled molecular weight (Mw) and degree of regioregularity; additionally, π-conjugated P3HT structures in both solutions and films were systematically investigated. Conjugated P3HT phases in spin-cast films significantly changed from ordered nanorods, -fibrils, and -ribbons to less-ordered granules, depending on the conformation of the P3HT chains in solutions. The chain conformations could be physicochemically adjusted by modifying chain lengths (from 5 to 45 kDa), solvents, and ultrasonication. Highly extended conformations of the P3HT in ultrasound-treated solutions yielded longer degree of conjugation both the intra- and intermolecularly. When toluene was used as a marginal solvent, ultrasonicated 0.1 wt % 29 kDa P3HT solutions could be used to yield highly ordered aggregates in spin-cast films, including nanoribbons or nanosheets, with field-effect mobility (μFET) up to ∼0.1 cm(2) V(-1) s(-1) being measured for organic field-effect transistors (OFETs). However, ultrasonicated chloroform systems with good P3HT solubility (for P3HT Mw ≥ 20 kDa) yielded featureless conducting layers even at 0.4 wt % P3HT content. However, these film-based OFETs yielded μFET values up to 0.04 cm(2) V(-1) s(-1), which were much greater than 0.004 cm(2) V(-1) s(-1) for the nonultrasonicated systems.

Effects of Regioregularity and Molecular Weight on the Growth of Polythiophene Nanofibrils and Mixes of Short and Long Nanofibrils To Enhance the Hole Transport

Morphological control over polythiophenes has been widely studied; however the impacts of regioregularity (RR) and molecular weight (MW) on their structural development have not been investigated systematically. This study examined a representative polythiophene, poly(3-hexylthiophene) (P3HT), to reveal that small differences in the RR can produce a large difference in the growth of nanofibrils. Low-RR P3HTs generated neat long nanofibrils (LNFs), whereas high-RR P3HTs formed short nanofibrils (SNFs). This study identified a critical RR (96-98%) depending on their MW, below which P3HT grew into LNFs and above which P3HT grew into SNFs. This study also found that the mixing ratio between high-RR P3HT and a low-RR P3HT in the solution phase is strongly correlated with the relative populations of SNF and LNF in the coated film. This study suggested that mixing high-RR and low-RR polymers may be a good strategy to optimize the electrical properties of polythiophenes for target applications. As an example, a mixture of high-RR (75%) P3HT and low-RR P3HT (25%) improved considerably the power conversion efficiency of bulk heterojunction polymer solar cells compared with the values obtained from the pure high-RR P3HT and the pure low-RR P3HT.