Bi2O3/Gd2O3 Meta-Aerogel with Leaf-Inspired Nanotrap Array Enables Efficient X-Ray Absorption

The increasing utilization of X-rays has generated a growing need for efficient shielding materials. However, the existing Pb-based materials suffer from a narrow X-ray absorbing range, high weight, and rigidity. Inspired by the natural leaf, which can efficiently absorb light through chlorophyll and carotenoids in confined cells, we engineer ultralight and superelastic nanofibrous Bi2O3/Gd2O3 meta-aerogels (BGAs) with X-ray nanotrap arrays by manipulating the 3D confined assembly of 1D Bi2O3 and Gd2O3 nanofibers. The BGAs can synergistically absorb X-ray photons from complementary energy ranges into the nanotraps and induce cyclic collisions with Bi2O3 and Gd2O3 nanofibers, maximizing the effective X-ray attenuation. The meta-aerogel exhibits the integrated performance of efficient X-ray shielding efficiency (60-83%, 16-90 keV), ultralow density (10 mg cm-3), and superelasticity. The production of these meta-aerogels presents an avenue for the development of next-generation X-ray protective materials and the resolution of X-ray imaging systems.

High-Performance Waterproof, Breathable, and Radiative Cooling Membranes Based on Nanoarchitectured Fiber/Meshworks

Smart membranes with protection and thermal-wet comfort are highly demanded in various fields. Nevertheless, the existing membranes suffer from a tradeoff dilemma of liquid resistance and moisture permeability, as well as poor thermoregulating ability. Herein, a novel strategy, based on the synchronous occurrence of humidity-induced electrospinning and electromeshing, is developed to synthesize a dual-network structured nanofiber/mesh for personal comfort management. Manipulating the ejection, deformation, and phase separation of spinning jets and charged droplets enables the creation of nanofibrous membranes composed of radiative cooling nanofibers and 2D nanostructured meshworks. With a combination of a true-nanoscale fiber (∼70 nm) in 2D meshworks, a small pore size (0.84 μm), and a superhydrophobic surface (151.9°), the smart membranes present high liquid repellency (95.6 kPa), improved breathability (4.05 kg m-2 d-1), and remarkable cooling performance (7.9 °C cooler than commercial cotton fabrics). This strategy opens up a pathway to the design of advanced smart textiles for personal protection.

Two-Dimensional Nanofibrous Networks by Superspreading-Based Phase Inversion for High-Efficiency Separation

Two-dimensional (2D) nanomaterials have been widely applied as building blocks of nanoporous materials for high-precision separations. However, most existing 2D nanomaterials suffer from poor continuity and a lack of interior linking, resulting in deteriorated performance when assembled into macroscopic bulk structures. Here, a unique superspreading-based phase inversion technique is proposed to directly construct 2D nanofibrous networks (NFNs) from a polymer solution. By tailoring capillary behavior, polymer solution droplets evolve into ultrathin liquid films through superspreading; manipulating phase instability, subsequently, enables the liquid film to phase invert into continuous nanostructured networks. The assembled single-layered NFNs possess integrated structural superiorities of 1D nanoscale fiber diameter (∼40 nm) and 2D lateral infinity, exhibiting a weblike nanoarchitecture with extremely small through-pores (∼100 nm). Our NFNs show remarkable performances in air filtration (PM0.3 removal) and water purification (microfiltration level). This creation of such attractive 2D fibrous nanomaterials can pave the way for versatile high-performance separation applications.

Di-(2-ethylhexyl) phthalate aggravates psoriasis-like skin lesions: In vitro and in vivo evaluation

Di-(2-ethylhexyl) phthalate (DEHP), which is a widely used phthalate (PAE), has recently received public attention owing to it causing health problems. The aim of this study was to elucidate the aggravating effects of DEHP on psoriasis and skin toxicity. Human keratinocyte (HaCaT) cells were treated with gradient concentrations of DEHP, and mice with imiquimod (IMQ)-induced psoriasiform dermatitis were hypodermically injected with 40 μg/kg/day of DEHP for seven consecutive days. The skin condition was assessed based on the psoriasis area and severity index score, which indicated the deterioration of IMQ-induced psoriasis-like skin lesions after DEHP exposure. To further analyze the effect of DEHP on psoriasis, the proliferation, inflammation, and tight junction (TJ) damage were examined, which correlated with the development and severity of psoriasis. The results showed that DEHP promoted proliferation both in vivo and in vitro, which manifested as epidermal thickening; an increase in cell viability; upregulation of Ki67, CDK2, cyclinD1, and proliferating cell nuclear antigen; and downregulation of p21. An excessive inflammatory response is an important factor that exacerbates psoriasis, and our results showed that DEHP can trigger the release of inflammatory cytokines as well as the infiltration of T cells. TJ disorders were found in mice and cells after DEHP treatment. Additionally, p38 mitogen-activated protein kinase (MAPK) was strongly activated during this process, which may have contributed to skin toxicity caused by DEHP. In conclusion, DEHP treatment promotes proliferation, inflammation, TJ disruption, and p38 MAPK activation in HaCaT cells and psoriasis-like skin lesions.

Test of CP Symmetry in Hyperon to Neutron Decays

The quantum entangled J/ψ→Σ^{+}Σ[over ¯]^{-} pairs from (1.0087±0.0044)×10^{10}  J/ψ events taken by the BESIII detector are used to study the nonleptonic two-body weak decays Σ^{+}→nπ^{+} and Σ[over ¯]^{-}→n[over ¯]π^{-}. The CP-odd weak decay parameters of the decays Σ^{+}→nπ^{+} (α_{+}) and Σ[over ¯]^{-}→n[over ¯]π^{-} (α[over ¯]_{-}) are determined to be 0.0481±0.0031_{stat}±0.0019_{syst} and -0.0565±0.0047_{stat}±0.0022_{syst}, respectively. The decay parameter α[over ¯]_{-} is measured for the first time, and the accuracy of α_{+} is improved by a factor of 4 compared to the previous results. The simultaneously determined decay parameters allow the first precision CP symmetry test for any hyperon decay with a neutron in the final state with the measurement of A_{CP}=(α_{+}+α[over ¯]_{-})/(α_{+}-α[over ¯]_{-})=-0.080±0.052_{stat}±0.028_{syst}. Assuming CP conservation, the average decay parameter is determined as ⟨α_{+}⟩=(α_{+}-α[over ¯]_{-})/2=-0.0506±0.0026_{stat}±0.0019_{syst}, while the ratios α_{+}/α_{0} and α[over ¯]_{-}/α[over ¯]_{0} are -0.0490±0.0032_{stat}±0.0021_{syst} and -0.0571±0.0053_{stat}±0.0032_{syst}, where α_{0} and α[over ¯]_{0} are the decay parameters of the decays Σ^{+}→pπ^{0} and Σ[over ¯]^{-}→p[over ¯]π^{0}, respectively.

Measurement of Energy-Dependent Pair-Production Cross Section and Electromagnetic Form Factors of a Charmed Baryon

We study the process e^{+}e^{-}→Λ_{c}^{+}Λ[over ¯]_{c}^{-} at twelve center-of-mass energies from 4.6119 to 4.9509 GeV using data samples collected by the BESIII detector at the BEPCII collider. The Born cross sections and effective form factors (|G_{eff}|) are determined with unprecedented precision after combining the single and double-tag methods based on the decay process Λ_{c}^{+}→pK^{-}π^{+}. Flat cross sections around 4.63 GeV are obtained and no indication of the resonant structure Y(4630), as reported by Belle, is found. In addition, no oscillatory behavior is discerned in the |G_{eff}| energy dependence of Λ_{c}^{+}, in contrast to what is seen for the proton and neutron cases. Analyzing the cross section together with the polar-angle distribution of the Λ_{c}^{+} baryon at each energy point, the moduli of electric and magnetic form factors (|G_{E}| and |G_{M}|) are extracted and separated. For the first time, the energy dependence of the form factor ratio |G_{E}/G_{M}| is observed, which can be well described by an oscillatory function.

Study on physicochemical properties, fatty acids, texture, antioxidant and antibacterial activities of ghee from different regions

Due to the lack of basic information on Chinese ghee and the increasing demand of consumers for natural oils, this study aims to explore and distinguish the quality characteristics of ghee in different regions of China. Ghee samples from 16 regions of Qinghai Province, Gansu Province, Xinjiang Uyghur Autonomous Region, and Tibet Autonomous Region were selected and their physicochemical properties, fatty acids, texture, antioxidant and antibacterial activities were determined. The results showed that: (1) The physicochemical properties of ghee were different from different regions, but the freshness and fat content are generally high. The results of iodine value and saponification value suggest that the fatty acid composition is good; (2) The unsaturated fatty acid/saturated fatty acid content of ghee in Tibet and Xinjiang ranges from 63.05% to 79.13%, which is better than that in other regions; (3) Gansu Diebu ghee has the highest hardness (40.69 N); (4) Ghee from different regions has good antioxidant activity, DPPH free radical scavenging activity is 30.45% to 58.06%, ABTS free radical scavenging activity is 41.14% to 65.53%, and has varying degrees of inhibition on gram-positive bacteria. In addition, yak ghee, cattle-yak ghee and cow ghee have better fatty acid composition and antibacterial ability than scalper ghee. The results of this study distinguish the differences in the quality characteristics of yak ghee in different geographical regions. Therefore, it can provide a theoretical basis for the origin tracing and quality-oriented improvement of yak ghee.

Heat-conducting elastic ultrafine fiber sponges with boron nitride networks for noise reduction

Industrial and traffic noise has become increasingly serious with the progress of industrialization. Most existing noise-absorbing materials suffer from poor heat dissipation and insufficient low-frequency (<1000 Hz) noise absorption, which not only reduces working efficiency but also leads to safety risks. Herein, heat-conducting elastic ultrafine fiber sponges with boron nitride (BN) networks were prepared by integrating direct electrospinning and impregnation method. The large acoustic contact area of ultrafine fibers and the vibration effect of BN nanosheets in a three-dimensional direction endow fiber sponges with good noise reduction, which can reduce white noise by 28.3 dB with a high noise reduction coefficient of 0.64. Moreover, thanks to good heat-conducting networks composed of BN nanosheets and porous structures, the obtained sponges exhibit superior heat dissipation with thermal conductivity of 0.159 W m-1 K-1. Besides, the introduction of elastic polyurethane and following crosslinking endow the sponges with good mechanical properties, which have almost no plastic deformation after 1000 compressions, and the tensile strength and strain are as high as 0.28 MPa and 75%. The successful synthesis of heat-conducting elastic ultrafine fiber sponges overcomes poor heat dissipation and low-frequency noise reduction of noise absorbers.

Sweat Gland-Inspired Skin-like Fabric with Directional Water Transport and Durability for Efficient Personal Moisture Management

Directional water transport textiles are an energy-free approach to improving the comfort of the human body. However, existing strategies mainly focus on enhancing the capacity of directional water transport, complicating the preparation process and limiting the long-term durability of textiles. Herein, a skin-like fabric inspired by sweat glands was prepared in one step by patterning printed hydrophobic paste on the fabric. This skin-like fabric has achieved the desired one-way water transport index (R, 721%), air permeability of 104 mm s-1, and water vapor transmission rate (298 g m-2 h-1). More significantly, due to the strong chemical bonds between the fabric and the coating, the skin-like fabric exhibited a high weight retention of 99.4% after 400 abrasion cycles and stable performance (R, 658%) after 25 h of washing. This work proposes a reliable way to prepare high-performance fabrics with durability, which show great potential for applications in functional textiles for personal moisture management.

Inhibited Grain Growth Through Phase Transition Modulation Enables Excellent Mechanical Properties in Oxide Ceramic Nanofibers up to 1700 °C

Oxide ceramics are widely used as thermal protection materials due to their excellent structural properties and earth abundance. However, in extremely high-temperature environments (above 1500 °C), the explosive growth of grain size causes irreversible damage to the microstructure of oxide ceramics, thus exhibiting poor thermomechanical stability. This problem, which may lead to catastrophic accidents, remains a great challenge for oxide ceramic materials. Here, a novel strategy of phase transition modulation is proposed to control the grain growth at high temperatures in oxide ceramic nanofibers, realizing effective regulation of the crystalline forms as well as the size uniformity of primary grains, and thus suppressing the malignant growth of the grains. The resulting oxide ceramic nanofibers have excellent mechanical strength and flexibility, delivering an average tensile strength as high as 1.02 GPa after being exposed to 1700 °C for 30 min, and can withstand thousands of flexural cycles without obvious damage. This work may provide new insight into the development of advanced oxide ceramic materials that can serve in extremely high-temperature environments with long-term durability.

Meta-Aerogel Electric Trap Enables Instant and Continuable Pathogen Killing in Face Masks

The tremendous menace of the COVID-19 pandemic has underscored the urgency for antipathogen masks to stop the transmission of airborne infectious diseases. Most prevailing antipathogen masks manifest a slower sterilization rate that lags behind the pathogen momentum traversing the masks, thereby engendering an elevated susceptibility to infection. Here we tailor nanofibrous meta-aerogel electric traps, 3D-assembled from self-knotted carbon nanotube networks in an all rigid nanofibrous skeleton. This superior configuration revolves around the creation of numerous "dielectrophoretic-aerodynamic grippers", which are capable of directional manipulation of microbes toward the region of the lethal intensive electric field. Based on this, we present a disinfection unit comprising a pair of aerogel electrodes that demonstrate a rapid killing rate (>99.99% biocidal efficacy within 0.016 s) and long-term durability (12 h of continuous operation). Additionally, a microbutton lithium cell is employed as a power supply to fabricate an antipathogen face mask with this disinfection unit, which exhibits superior pathogen inactivation efficacy compared to commercial masks. This scalable biocidal protective equipment holds great potential for use in emergency medical services.

A Fiber Sliding-Orientation Based Micromechanics Failure Model for Melt-Blown Nonwovens

The mechanical model of melt-blown nonwovens (MNs) serves as the foundation for performance optimization, which can offer helpful guidance for product material selection, structural design, and cost control. However, it is challenging to describe the micromechanics failure mechanism of MNs using the traditional mechanical model, which aims to match the model curve with the experimental result at the macrolevel. Herein, a micromechanics failure model for MNs based on sliding-orientation competition is developed. Through in situ observations of fiber position changes and the fluctuation of stress-strain curves, fiber sliding and orientation are introduced into the failure process of MNs. Due to fiber bonding and static friction, only orientation happens during the first stage of stretching. In dramatic contrast, the fibers will slide and orient in the second stage of stretching to change their positions in response to the external force. Sliding friction, fiber bonding, and static friction make up the stress of MNs, and the conflict of fiber sliding and orientation causes variations in the stress. The model has been successfully applied to polylactic acid (PLA) MNs, which proves the effectiveness of the model in MNs.

Determination of Spin-Parity Quantum Numbers for the Narrow Structure near the pΛ[over ¯] Threshold in e^{+}e^{-}→pK^{-}Λ[over ¯]+c.c

A narrow structure in the pΛ[over ¯] system near the mass threshold, named as X(2085), is observed in the process e^{+}e^{-}→pK^{-}Λ[over ¯] with a statistical significance greater than 20σ. Its spin and parity are determined for the first time to be J^{P}=1^{+} in an amplitude analysis, with a statistical significance greater than 5σ over other quantum numbers (0^{-},1^{-} and 2^{+}). The pole positions of X(2085) are measured to be M_{pole}=(2084_{-2}^{+4}±9)  MeV and Γ_{pole}=(58_{-3}^{+4}±25)  MeV, where the first uncertainties are statistical and the second ones are systematic. The analysis is based on the study of the process e^{+}e^{-}→pK^{-}Λ[over ¯] and uses the data samples collected with the BESIII detector at the center-of-mass energies sqrt[s]=4.008, 4.178, 4.226, 4.258, 4.416, and 4.682 GeV with a total integrated luminosity of 8.35  fb^{-1}.

Precise Measurement of the e^{+}e^{-}→D_{s}^{*+}D_{s}^{*-} Cross Sections at Center-of-Mass Energies from Threshold to 4.95 GeV

The process e^{+}e^{-}→D_{s}^{*+}D_{s}^{*-} is studied with a semi-inclusive method using data samples at center-of-mass energies from threshold to 4.95 GeV collected with the BESIII detector operating at the Beijing Electron Positron Collider. The Born cross sections of the process are measured for the first time with high precision in this energy region. Two resonance structures are observed in the energy-dependent cross sections around 4.2 and 4.4 GeV. By fitting the cross sections with a coherent sum of three Breit-Wigner amplitudes and one phase-space amplitude, the two significant structures are assigned masses of (4186.8±8.7±30) and (4414.6±3.4±6.1)  MeV/c^{2}, widths of (55±15±53) and (122.5±7.5±8.1)  MeV, where the first errors are statistical and the second ones are systematic. The inclusion of a third Breit-Wigner amplitude is necessary to describe a structure around 4.79 GeV.

Scalable Synthesis of Flexible Single-Atom Monolithic Catalysts for High-Efficiency, Durable CO Oxidation at Low Temperature

The creation of single-atom catalysts in a large-size, high-yield, and stable form represents an important direction for high-efficiency industrial catalysis in the future. Herein, we report a strategy to synthesize flexible single-atom monolithic catalysts (SAMCs) based on the hierarchical 3D assembly of single-atom-loaded oxide ceramic nanofibers. The nanofibers, which can be produced in a continuous and scalable manner, serve as an ideal support for single atoms spontaneously and almost completely exposed at the surface through the Kirkendall effect-enabled in situ ion migration during the spinning process, resulting in both high yield and large loading quantity. Moreover, the hierarchical 3D assembly of these nanofibers into a porous, flexible structure endows the SAMCs with the advantages of sufficient infiltration and oscillation tolerance when faced with high-throughput gaseous media, leading to both high catalytic efficiency and excellent durability. As a proof-of-concept demonstration, a Pt SAMC is synthesized, which exhibits 100% CO oxidation at low temperature (∼170 °C), excellent invariance toward high-frequency (10 Hz) oscillation, and high structural stability from 25 to 300 °C. This work is beneficial for the large-scale production of SAMCs in broad industrial applications.

First Experimental Study of the Purely Leptonic Decay D_{s}^{*+}→e^{+}ν_{e}

Using 7.33  fb^{-1} of e^{+}e^{-} collision data taken with the BESIII detector at the BEPCII collider, we report the first experimental study of the purely leptonic decay D_{s}^{*+}→e^{+}ν_{e}. Our data contain a signal of this decay with a statistical significance of 2.9σ. The branching fraction of D_{s}^{*+}→e^{+}ν_{e} is measured to be (2.1_{-0.9_{stat}}^{+1.2}±0.2_{syst})×10^{-5}, corresponding to an upper limit of 4.0×10^{-5} at the 90% confidence level. Taking the total width of the D_{s}^{*+} [(0.070±0.028)  keV] predicted with the radiative D_{s}^{*+} decay from the lattice QCD calculation as input, the decay constant of the D_{s}^{*+} is determined to be f_{D_{s}^{*+}}=(214_{-46_{stat}}^{+61}±44_{syst})  MeV, corresponding to an upper limit of 354 MeV at the 90% confidence level.

Ultralight and Superelastic Curly Micro/Nanofibrous Aerogels by Direct Electrospinning Enable High-Performance Warmth Retention

Extremely low temperature has posed huge burden on the public safety concerns and global economics, thereby calling for high-performance warmth retention materials to resist harsh environment. However, most present fibrous warmth retention materials are limited by their large fiber diameter and simple stacking structure, leading to heavy weight, weak mechanical property, and limited thermal insulation performance. Herein, an ultralight and mechanically robust polystyrene/polyurethane fibrous aerogel by direct electrospinning for warmth retention is reported. Manipulation of charge density and phase separation of charged jet allows for the direct assembly of fibrous aerogels consisting of interweaved curly wrinkled micro/nanofibers. The resultant curly wrinkled micro/nanofibrous aerogel possesses low density of 6.8 mg cm-3 and nearly full recovery from 1500-cycle deformations, exhibiting both ultralight feature and superelastic property. The aerogel also shows low thermal conductivity of 24.5 mW m-1  K-1 , making synthetic warmth retention materials superior to down feather possible. This work may shed light on developing versatile 3D micro/nanofibrous materials for environmental, biological, and energy applications.

Janus Dual Self-Strengthening Structure of Bi2 O3 /Gd2 O3 Nanofibrous Membranes for Superior X-Ray Shielding

Bi2 O3 /rare earth oxide biphasic absorbers are attractive for high-efficiency X-ray shielding due to the complementary X-ray absorption effects. However, its application is severely hindered by poor interphasic contact. Here, a new Janus interface engineering strategy is reported for the construction of continuous and flexible Bi2 O3 /Gd2 O3 crystal nanofibrous membranes (FJNMs) with micro/nano dual self-strengthening interphasic adhesion. This strategy facilitates online micro-interlocking between Bi2 O3 /Gd2 O3 nanofibers and in situ nano-grain fusion between Bi2 O3 /Gd2 O3 crystals, significantly enhancing the adhesive strength at the Bi2 O3 /Gd2 O3 interface. Additionally, the synergistic shielding effect from Bi2 O3 /Gd2 O3 absorption and multiple reflections in Bi2 O3 and Gd2 O3 crystal lattices make the nanofibrous membranes a superior X-ray radiation barrier. The FJNMs demonstrate integrated features of exceptional X-ray shielding efficiency (91%-100%), robust interfacial adhesion (lap-shear strength >3.8 MPa), prominent flexibility, lightweight, and outstanding breathability. The design concepts of fibrosing biphasic absorber assemblies pave the way for asymmetrically assembling biphasic materials, setting the stage for a fundamental shift in next-generation radiation shielding materials.

Favorable effect of herbal extract on androgenic alopecia: A case report

RATIONALE

Androgenic alopecia (AGA) is a prevalent condition with progressive miniaturization of hair follicles. Currently, reliable treatments have remained limited, and complementary medications for AGA are still being investigated. Traditional Chinese medicine formulas have conspicuous advantages in the treatment of AGA with good development prospects. Zimmer aqueous spray (ZAS) is a water spray containing Zimmer herbal extract powder (ZMWP), which consists of Ligustri lucidi Fructus, Ecliptae Herba, Fallopia multiflora (Thunb.) Harald. and Polygonatum sibiricum Delar. ex Redoute, etc. ZMWP is an active ingredient in the prevention of hair loss. Our aim is to provide evidence for the effectiveness of ZAS in the treatment of AGA.

PATIENT CONCERNS

A 41-year-old man had suffered from hair loss for 8 years.

INTERVENTIONS

The patient with moderate AGA received 3 to 4 mL ZAS daily or every other day for 3 months.

OUTCOMES

The hair density obviously increased after 3 months of therapy. The improvement of hair diameter, vellus hair rate, and 1 hair pilosebaceous unit rate were observed with a trichoscopy and quantitatively analyzed. Besides, honeycomb pigment pattern mitigated and arborized red lines.

LESSONS

The results suggested that ZMWP might have the capability of improving hair growth and attenuating AGA, which can be a promising alternative treatment of AGA.

Direct Synthesis of Elastic and Stretchable Hierarchical Structured Fiber and Graphene-Based Sponges for Noise Reduction

Noise pollution, as one of the three major pollutants in the world, has become a great burden on people's health and the global economy. Most present noise absorbers suffer large weight and inevitable compromise between good low-frequency (usually <1000 Hz) and high-frequency (typically >1000 Hz) noise reduction performance. This study presents a scalable strategy to directly synthesize ultrafine fiber sponges with ultrathin graphene-based vibrators by the synchronous occurrence of humidity-assisted electrospinning and electrospraying. The unique physical entanglements between reduced graphene oxide (rGO) nanosheets and ultrafine fibers endow hierarchical vibration structured fiber sponges (VSFSs) with excellent mechanical properties, which could withstand large shear strain (60%) and tensile stress (6000 times its weight) without damage and almost have no plastic deformation after 1000 compressions. Attribute to the vibration effect of ultrathin graphene-based vibrators and the viscous friction effect of porous fiber networks, the VSFSs achieve both good low-frequency (absorption coefficient of 0.98 in 680 Hz) and high-frequency sound absorption (absorption coefficients above 0.8 in 2000-6300 Hz) simultaneously. Furthermore, the noise reduction coefficient (NRC) of lightweight VSFSs (thickness of 30 mm) reaches 0.63, which could reduce high decibel noise by 24.4 dB, providing potential solutions for developing ideal noise-absorbing materials.

Mechanical Fourier transform for programmable metamaterials

Proactively programming materials toward target nonlinear mechanical behaviors is crucial to realize customizable functions for advanced devices and systems, which arouses persistent explorations for rapid and efficient inverse design strategies. Herein, we propose a "mechanical Fourier transform" strategy to program mechanical behaviors of materials by mimicking the concept of Fourier transform. In this strategy, an arbitrary target force-displacement curve is decomposed into multiple cosine curves and a constant curve, each of which is realized by a rationally designed multistable module in an array-structured metamaterial. Various target curves with distinct shapes can be rapidly programmed and reprogrammed through only amplitude modulation on the modules. Two exemplary metamaterials are demonstrated to validate the strategy with a macroscale prototype based on magnet lattice and a microscale prototype based on an etched silicon wafer. This strategy applies to a variety of scales, constituents, and structures, and paves a way for the property programming of materials.

Visualizing Interfacial Energy Offset and Defects in Efficient 2D/3D Heterojunction Perovskite Solar Cells and Modules

Currently, the full potential of perovskite solar cells (PSCs) is limited by chargecarrier recombination owing to imperfect passivation methods. Here, the recombination loss mechanisms owing to the interfacial energy offset and defects are quantified. The results show that a favorable energy offset can reduce minority carriers and suppress interfacial recombination losses more effectively than chemical passivation. To obtain high-efficiency PSCs, 2D perovskites are promising candidates, which offer powerful field effects and require only modest chemical passivation at the interface. The enhanced passivation and charge-carrier extraction offered by the 2D/3D heterojunction PSCs has boosted their power conversion efficiency to 25.32% (certified 25.04%) for small-size devices and to 21.48% for a large-area module (with a designated area of 29.0 cm2 ). Ion migration is also suppressed by the 2D/3D heterojunction, such that the unencapsulated small-size devices maintain 90% of their initial efficiency after 2000 h of continuous operation at the maximum power point.

Spatial transcriptomics reveals heterogeneity of macrophages in the tumor microenvironment of granulomatous slack skin

Granulomatous slack skin (GSS) is an extremely rare subtype of cutaneous T-cell lymphoma accompanied by an abundant number of macrophages and is clinically characterized by the development of pendulous skin folds. However, the characteristics of these macrophages in GSS remain unclear. Here, we conducted a spatial transcriptomic study on one frozen GSS sample and drew transcriptomic maps of GSS for the first time. Gene expression analysis revealed the enrichment of three clusters with macrophage transcripts, each exhibiting distinct characteristics suggesting that their primary composition consists of different subpopulations of macrophages. The CD163+ /CD206+ cluster showed a tumor-associated macrophage (TAM) M2-like phenotype and highly expressed ZFP36, CCL2, TNFAIP6, and KLF2, which are known to be involved in T-cell interaction and tumor progression. The APOC1+ /APOE+ cluster presented a non-M1 or -M2 phenotype and may be related to lipid metabolism. The CD11c+ /LYZ+ cluster exhibited an M1-like phenotype. Notably, these cells strongly expressed MMP9, MMP12, CHI3L1, CHIT1, COL1A1, TIMP1, and SPP1, which are responsible for extracellular matrix (ECM) degradation and tissue remodeling. This may partially explain the symptoms of cutaneous relaxation in GSS. Further immunohistochemistry on four GSS cases demonstrated that CD11c predominantly marked granulomas and multinucleated giant cells, whereas CD163 was mainly expressed on scattered macrophages, appearing as a mutually exclusive pattern. The expression pattern of MMP9 overlapped with that of CD11c, implying that CD11c+ macrophages may be a source of MMP9. Our data shed light on the characteristics of macrophages in the GSS microenvironment and provide a theoretical basis for the application of MMP9 inhibitors to prevent cutaneous relaxation of GSS. © 2023 The Authors. The Journal of Pathology published by John Wiley & Sons Ltd on behalf of The Pathological Society of Great Britain and Ireland.

Meta-Aerogel Ion Motor for Nanofluid Osmotic Energy Harvesting

Osmotic power, also known as "blue energy", is a vast, sustainable, and clean energy source that can be directly converted into electricity by nanofluidic membranes. However, the key technological bottleneck for large-scale osmotic electricity is that macroscopic-scale bulky membrane cannot synergistically satisfy the demands of high power density and low resistance without sacrificing scalability and mechanical robustness. Here, inspired by the anatomy and working principle of electric eels, which harness osmotic energy through embedded neuron-mediated fibril nanochannels with nanoconfined transport dynamics. Fibrous nanofluidic meta-aerogel ion motors, 3D-assembled from nanofluidic cable fibers with actuatable stimulation/transport "ion highways" are engineered. The meta-aerogel exhibits the integrated coupling effect of boosted ion propulsion and surface-charge-dominated selective ion transport. Driven by osmosis, the meta-aerogel ion motor can produce an unprecedented output power density of up to 30.7 W m-2 under a 50-fold salinity gradient. Advancing ultra-selective ion transport in nanofluidic meta-aerogels may provide a promising roadmap for blue energy harvesting.

Enhancing sustainable valorization: Harmless synergistic melting treatment for high-value vitreous products from MSWI fly ash and electrolytic manganese residue

The waste-to-energy and manganese industries face significant ecological challenges due to two major risk sources: municipal solid waste incineration (MSWI) fly ash and electrolytic manganese residue (EMR), especially, the MSWI fly is classified as hazardous waste. High temperature melting is a promising method for harmless disposal of solid wastes. However, it has yet to be industrialized due to the high costs and energy consumption. This study proposes using EMR as an additive to co-melt with MSWI fly ash, aiming to develop a method that minimizes energy consumption while producing high value-added products. To this end, the phase evolution and phase-change cooling characteristics during the co-melting process of MSWI fly ash and EMR were experimentally investigated. XRD and SEM analyses revealed that pure vitreous slag can be obtained when mixtures are heated to 1500 °C for 120 min with ≥40 wt% EMR addition under natural air-cooling conditions. Additionally, to produce vitreous slag by air-cooling and increase MSWI fly ash treatment capacity, the molten mixture with 30 wt% EMR addition was adopted in the directional solidification experiments to establish a predictive model relating the average cooling rate to the glass content. The findings ultimately contribute to the advancement of melting-based industrial applications.