51
|
Scholz TL, Midha PA, Anderson LJ, Ku DN. PneumoniaCheck: A Device for Sampling Lower Airway Aerosols. J Med Device 2010. [DOI: 10.1115/1.4002760] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022] Open
Abstract
The pathogens causing pneumonia are difficult to identify because a high quality specimen from the lower lung is difficult to obtain. A new specimen collection device is designed to collect aerosol specimens selectively from the lower lung generated during deep coughing. The PneumoniaCheck device utilizes a separation reservoir and Venturi valve to segregate contents from the upper and lower airways. The device also includes several specially designed features to exclude oral contaminants from the sample and a filter to collect the aerosolized pathogens. Verification testing of PneumoniaCheck demonstrates effective separation of upper airway gas from the lower airway gas (p<0.0001) and exclusion of both liquid and viscous oral material (p<0.0001) from the collection chamber. The filters can collect 99.9997% of virus and bacteria sized particles from the sampled lower lung aerosols. The selective collection of specimens from the lower airway may aid in the diagnosis of specific pathogens causing pneumonia.
Collapse
|
52
|
Weaver JD, Ku DN. Mechanical Evaluation of Polyvinyl Alcohol Cryogels for Covered Stents. J Med Device 2010. [DOI: 10.1115/1.4001863] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023] Open
Abstract
Covered stents could reduce restenosis rates by preventing cellular migration with a physical barrier and may have reduced thrombotic complications if an appropriate material is selected. Previous Dacron™ or poly(tetrafluoroethylene) (PTFE) covered stents have had mixed clinical results in part because they are too thick and too thrombogenic at small diameters. Ideally, the covering should be as thin as a stent strut, mechanically able to expand as much as a stent, and durable enough to withstand deployment. As an alternative to PTFE, thin polyvinyl alcohol (PVA) cryogel membranes were tested for their ability to stretch with uniaxial tension tests and for puncture strength with a modified ASTM method. Additionally, PVA cryogel covered stents were made by coating expanded bare metal stents. These covered stents were then hand-crimped onto a balloon catheter and expanded. PVA cryogel membranes were made as thin as 100 μm—thinner than some stent struts—and stretched to approximately 3.0 times their original diameter (similar to a stent during deployment). PVA cryogel membranes resisted puncture well with an average push-through displacement of 4.77 mm—allowing for safe deployment in vessels of up to 9 mm in diameter. Push-through displacement did not depend on membrane thickness in the range tested—a trait that could reduce stent profile without increased risk of puncture. All the PVA cryogel covered stents tolerated the crimping and expansion process well and there was little to no visible membrane damage. In conclusion, based on the results of these mechanical tests, PVA cryogels are mechanically suitable for covered stent membranes. This work represents a first step toward the creation of a new class of covered stent, which could prevent complications from both restenosis and thrombosis.
Collapse
|
53
|
Carroll GT, Devereux PD, Ku DN, McGloughlin TM, Walsh MT. Experimental validation of convection-diffusion discretisation scheme employed for computational modelling of biological mass transport. Biomed Eng Online 2010; 9:34. [PMID: 20642816 PMCID: PMC2918622 DOI: 10.1186/1475-925x-9-34] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2009] [Accepted: 07/19/2010] [Indexed: 11/10/2022] Open
Abstract
BACKGROUND The finite volume solver Fluent (Lebanon, NH, USA) is a computational fluid dynamics software employed to analyse biological mass-transport in the vasculature. A principal consideration for computational modelling of blood-side mass-transport is convection-diffusion discretisation scheme selection. Due to numerous discretisation schemes available when developing a mass-transport numerical model, the results obtained should either be validated against benchmark theoretical solutions or experimentally obtained results. METHODS An idealised aneurysm model was selected for the experimental and computational mass-transport analysis of species concentration due to its well-defined recirculation region within the aneurysmal sac, allowing species concentration to vary slowly with time. The experimental results were obtained from fluid samples extracted from a glass aneurysm model, using the direct spectrophometric concentration measurement technique. The computational analysis was conducted using the four convection-diffusion discretisation schemes available to the Fluent user, including the First-Order Upwind, the Power Law, the Second-Order Upwind and the Quadratic Upstream Interpolation for Convective Kinetics (QUICK) schemes. The fluid has a diffusivity of 3.125 x 10-10 m2/s in water, resulting in a Peclet number of 2,560,000, indicating strongly convection-dominated flow. RESULTS The discretisation scheme applied to the solution of the convection-diffusion equation, for blood-side mass-transport within the vasculature, has a significant influence on the resultant species concentration field. The First-Order Upwind and the Power Law schemes produce similar results. The Second-Order Upwind and QUICK schemes also correlate well but differ considerably from the concentration contour plots of the First-Order Upwind and Power Law schemes. The computational results were then compared to the experimental findings. An average error of 140% and 116% was demonstrated between the experimental results and those obtained from the First-Order Upwind and Power Law schemes, respectively. However, both the Second-Order upwind and QUICK schemes accurately predict species concentration under high Peclet number, convection-dominated flow conditions. CONCLUSION Convection-diffusion discretisation scheme selection has a strong influence on resultant species concentration fields, as determined by CFD. Furthermore, either the Second-Order or QUICK discretisation schemes should be implemented when numerically modelling convection-dominated mass-transport conditions. Finally, care should be taken not to utilize computationally inexpensive discretisation schemes at the cost of accuracy in resultant species concentration.
Collapse
|
54
|
Tang D, Yang C, Kobayashi S, Zheng J, Woodard PK, Teng Z, Billiar K, Bach R, Ku DN. 3D MRI-based anisotropic FSI models with cyclic bending for human coronary atherosclerotic plaque mechanical analysis. J Biomech Eng 2009; 131:061010. [PMID: 19449964 DOI: 10.1115/1.3127253] [Citation(s) in RCA: 66] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Heart attack and stroke are often caused by atherosclerotic plaque rupture, which happens without warning most of the time. Magnetic resonance imaging (MRI)-based atherosclerotic plaque models with fluid-structure interactions (FSIs) have been introduced to perform flow and stress/strain analysis and identify possible mechanical and morphological indices for accurate plaque vulnerability assessment. For coronary arteries, cyclic bending associated with heart motion and anisotropy of the vessel walls may have significant influence on flow and stress/strain distributions in the plaque. FSI models with cyclic bending and anisotropic vessel properties for coronary plaques are lacking in the current literature. In this paper, cyclic bending and anisotropic vessel properties were added to 3D FSI coronary plaque models so that the models would be more realistic for more accurate computational flow and stress/strain predictions. Six computational models using one ex vivo MRI human coronary plaque specimen data were constructed to assess the effects of cyclic bending, anisotropic vessel properties, pulsating pressure, plaque structure, and axial stretch on plaque stress/strain distributions. Our results indicate that cyclic bending and anisotropic properties may cause 50-800% increase in maximum principal stress (Stress-P1) values at selected locations. The stress increase varies with location and is higher when bending is coupled with axial stretch, nonsmooth plaque structure, and resonant pressure conditions (zero phase angle shift). Effects of cyclic bending on flow behaviors are more modest (9.8% decrease in maximum velocity, 2.5% decrease in flow rate, 15% increase in maximum flow shear stress). Inclusion of cyclic bending, anisotropic vessel material properties, accurate plaque structure, and axial stretch in computational FSI models should lead to a considerable improvement of accuracy of computational stress/strain predictions for coronary plaque vulnerability assessment. Further studies incorporating additional mechanical property data and in vivo MRI data are needed to obtain more complete and accurate knowledge about flow and stress/strain behaviors in coronary plaques and to identify critical indicators for better plaque assessment and possible rupture predictions.
Collapse
|
55
|
Yang C, Tang D, Kobayashi S, Zheng J, Woodard PK, Teng Z, Bach R, Ku DN. Cyclic Bending Contributes to High Stress in a Human Coronary Atherosclerotic Plaque and Rupture Risk: In Vitro Experimental Modeling and Ex Vivo MRI-Based Computational Modeling Approach. MOLECULAR & CELLULAR BIOMECHANICS : MCB 2008; 5:259-274. [PMID: 19412353 PMCID: PMC2675879] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Many acute cardiovascular syndromes such as heart attack and stroke are caused by atherosclerotic plaque ruptures which often happen without warning. MRI-based models with fluid-structure interactions (FSI) have been introduced to perform flow and stress/strain analysis for atherosclerotic plaques and identify possible mechanical and morphological indices for accurate plaque vulnerability assessment. In this paper, cyclic bending was added to 3D FSI coronary plaque models for more accurate mechanical predictions. Curvature variation was prescribed using the data of a human left anterior descending (LAD) coronary artery. Five computational models were constructed based on ex vivo MRI human coronary plaque data to assess the effects of cyclic bending, pulsating pressure, plaque structure, and axial stretch on plaque stress/strain distributions. In vitro experiments using a hydrogel stenosis model with cyclical bending were performed to observe effect of cyclical bending on flow conditions. Our results indicate that cyclical bending may cause more than 100% or even up to more than 1000% increase in maximum principal stress values at locations where the plaque is bent most. Stress increase is higher when bending is coupled with axial stretch, non-smooth plaque structure, or resonant pressure conditions (zero phase angle shift). Effects of cyclic bending on flow behaviors are more modest (21.6% decrease in maximum velocity, 10.8% decrease in flow rate, maximum flow shear stress changes were < 5%). Computational FSI models including cyclic bending, plaque components and structure, axial stretch, accurate in vivo measurements of pressure, curvature, and material properties should lead to significant improvement on stress-based plaque mechanical analysis and more accurate coronary plaque vulnerability assessment.
Collapse
|
56
|
Ku DN, Flannery CJ. Development of a flow-through system to create occluding thrombus. Biorheology 2007; 44:273-284. [PMID: 18094451] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
Occlusive thrombosis accounts for many heart attacks and strokes. These acute events are difficult to catch in patients and animal test methods may be misleading because anti-thrombotic therapeutics often do not cross-react with different species. This paper presents a new flow-through system that leads to rapid occlusive thrombosis in arterial flow conditions. Whole porcine blood is perfused through a tubular test section. The growing thrombus is visualized in real time from early platelet attachment, through accumulation, to occlusion. The progression of flow rate reduction provides a clear distinguishing parameter between thrombus formation and embolization. Thrombus growth rate is a linear function of very high shear rate beyond 40,000 s(-1). The histology of the thrombus reveals predominantly platelet accumulation and growth as a rough surface with tendrils. This flow-through system may be useful for the economic testing of new anti-thrombosis therapies.
Collapse
|
57
|
Abstract
Over 7 million Americans suffer from chronic venous insufficiency (CVI), a disease that affects the venous system of the lower extremities. Problems associated with CVI include ulcerations, bleeding, swelling, and varicose veins, as well as deep vein thrombosis and pulmonary embolism. The presence of CVI is the result of incompetent, or malfunctioning, one-way vein valves in leg veins. There are few effective clinical therapies for treating CVI and there are currently no prosthetic vein valves commercially available. The purpose of this study was to define clinically relevant design requirements, develop functional tests for assessing a prosthetic vein valve, and design and fabricate a functional prosthetic vein valve for eventual clinical use. Engineering design methods were used to develop the valve, building a product based on well-defined consumer needs and design specifications. Emphasis was placed on creating a valve with potential clinical functionality. This clinical functionality was distilled into three major design criteria: that the valve (1) withstand backpressure of 300mmHg with less than 1.0mL∕min of leakage; (2) open with distal pressure gradients less than 5mmHg; and (3) meet criteria 1 and 2 after 500,000cycles of opening and closing. Hydrostatic testing was conducted to measure the opening pressure and reflux leak rate of the valve. Cyclic life functionality was assessed using a cyclic flow loop simulating physiologic conditions of cyclic flow and pressure found in leg veins. The valve opened with a pressure of 2.6mmHg±0.7mmHg, which matches physiologic vein valve function. The valve also withstood 300mmHg of backpressure with less than 0.5mL∕min of leakage, and maintained this performance even after 508,000cycles of opening and closing in simulated physiologic conditions. The valve’s burst pressure was a minimum of 530mmHg±10mmHg, six times greater than physiologic pressure natural vein valves experience. The valve continued to function well in an environment of vein-like tube expansion. The newly designed bi-leaflet prosthetic valve is comprised of a flexible, biocompatible material. Bench test results have shown that the valve is hydrodynamically functional and meets the mechanical design criteria for backpressure competency and opening pressure after 500,000cycles. Finally, the valve can be manufactured easily with low cost.
Collapse
|
58
|
Denozière G, Ku DN. Biomechanical comparison between fusion of two vertebrae and implantation of an artificial intervertebral disc. J Biomech 2006; 39:766-75. [PMID: 16439247 DOI: 10.1016/j.jbiomech.2004.07.039] [Citation(s) in RCA: 146] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2004] [Accepted: 07/09/2004] [Indexed: 12/20/2022]
Abstract
Surgical treatments for lower back pain can be distributed into two main groups: fusion (arthrodesis) and disc replacement (arthroplasty). The objective of this study was to compare, under severe loading conditions, the biomechanics of the lumbar spine treated either by fusion or total disc replacement (TDR). A three-dimensional model of a two-level ligamentous lumbar segment was created and simulated through static analyses with the finite-element method (FEM) software ABAQUS. The model was validated by comparing mobility, pressure on the facets, force in the ligaments, maximum stresses, disc bulge, and endplate deflection with measured data given in the literature. The FEM analysis predicted that the mobility of the model after arthrodesis on the upper level was reduced in all rotational degrees of freedom by an average of approximately 44%, relative to healthy normal discs. Conversely, the mobility of the model after TDR on the upper level was increased in all rotational degrees of freedom by an average of approximately 52%. The level implanted with the artificial disc showed excessive ligament tensions (greater than 500 N), high facet pressures (greater than 3 MPa), and a high risk of instability. The mobility and the stresses in the level adjacent to the arthroplasty were also increased. In conclusion, the model for an implanted movable artificial disc illustrated complications common to spinal arthroplasty and showed greater risk of instability and further degeneration than predicted for the fused model. This modeling technique provides an accurate means for assessing potential biomechanical risks and can be used to improve the design of future artificial intervertebral discs.
Collapse
|
59
|
Denozière G, Ku DN. Biomechanical comparison between fusion of two vertebrae and implantation of an artificial intervertebral disc. J Biomech 2006. [PMID: 16439247 DOI: 10.1016/j.jbiomech.2004.07.039.] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Surgical treatments for lower back pain can be distributed into two main groups: fusion (arthrodesis) and disc replacement (arthroplasty). The objective of this study was to compare, under severe loading conditions, the biomechanics of the lumbar spine treated either by fusion or total disc replacement (TDR). A three-dimensional model of a two-level ligamentous lumbar segment was created and simulated through static analyses with the finite-element method (FEM) software ABAQUS. The model was validated by comparing mobility, pressure on the facets, force in the ligaments, maximum stresses, disc bulge, and endplate deflection with measured data given in the literature. The FEM analysis predicted that the mobility of the model after arthrodesis on the upper level was reduced in all rotational degrees of freedom by an average of approximately 44%, relative to healthy normal discs. Conversely, the mobility of the model after TDR on the upper level was increased in all rotational degrees of freedom by an average of approximately 52%. The level implanted with the artificial disc showed excessive ligament tensions (greater than 500 N), high facet pressures (greater than 3 MPa), and a high risk of instability. The mobility and the stresses in the level adjacent to the arthroplasty were also increased. In conclusion, the model for an implanted movable artificial disc illustrated complications common to spinal arthroplasty and showed greater risk of instability and further degeneration than predicted for the fused model. This modeling technique provides an accurate means for assessing potential biomechanical risks and can be used to improve the design of future artificial intervertebral discs.
Collapse
|
60
|
Swieszkowski W, Ku DN, Bersee HEN, Kurzydlowski KJ. An elastic material for cartilage replacement in an arthritic shoulder joint. Biomaterials 2006; 27:1534-41. [PMID: 16188311 DOI: 10.1016/j.biomaterials.2005.08.032] [Citation(s) in RCA: 58] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2005] [Accepted: 08/16/2005] [Indexed: 11/15/2022]
Abstract
Inevitable complications after total shoulder replacements, mainly due to wear and loosening of glenoid components, have stimulated research on a new glenoid implant design. The aim of this study is to analyse a new design concept of the glenoid component with the articular surface made of artificial cartilage-specifically a poly(vinyl-alcohol)cryogel (PVA-c). Based on the performed experiments and hyperelasticity law the material model of the PVA-c is defined. Mechanical effects of using a cryogel layer with different geometries in glenoid components are analysed using a finite element method. The analysis allows for identification of design solutions with reduced, lower than failure, strains and stresses in the cryogel. The layer shape similar to the glenoid cartilage shows the most favourable mechanical effects. This indicates a high potential of using this soft material for the articular surface. Replacing the polyethylene with a cryogel layer results in a significant reduction in contact stresses together with the growth in contact area. This can promote fluid film lubrication and lower the wear, thus lower implant failure. Moreover, soft cryogel, having shock absorbing properties, may result in lower stresses at the implant-bone, thus lowering the risk of implant loosening. This study indicates a high importance of an elastic implant for restoring full function of the articular surface in a glenoid component.
Collapse
|
61
|
Tang D, Yang C, Kobayashi S, Ku DN. Effect of a lipid pool on stress/strain distributions in stenotic arteries: 3-D fluid-structure interactions (FSI) models. J Biomech Eng 2004; 126:363-70. [PMID: 15341174 DOI: 10.1115/1.1762898] [Citation(s) in RCA: 98] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Nonlinear 3-D models with fluid-structure interactions (FSI) based on in vitro experiments are introduced and solved by ADINA to perform flow and stress/strain analysis for stenotic arteries with lipid cores. Navier-Stokes equations are used as the governing equations for the fluid. Hyperelastic Mooney-Rivlin models are used for both the arteries and lipid cores. Our results indicate that critical plaque stress/strain conditions are affected considerably by stenosis severity, eccentricity, lipid pool size, shape and position, plaque cap thickness, axial stretch, pressure, and fluid-structure interactions, and may be used for possible plaque rupture predictions.
Collapse
|
62
|
Han HC, Ku DN, Vito RP. Arterial wall adaptation under elevated longitudinal stretch in organ culture. Ann Biomed Eng 2003; 31:403-11. [PMID: 12723681 DOI: 10.1114/1.1561291] [Citation(s) in RCA: 53] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Arteries in vivo are subjected to large longitudinal stretch which may change significantly due to vascular disease and surgery. However, little is known about the effect of longitudinal stretch on vascular function and wall remodeling, although the effects of tensile and shear stress from blood pressure and flow have been well documented. To study the effect of longitudinal stretch on vascular function and wall remodeling, porcine carotid arteries were longitudinally stretched 20% more than in vivo for 5 days while being maintained in an ex vivo organ culture system under conditions of pulsatile flow at physiologic pressure. Vessel viability was demonstrated by strong vasomotor responses to norepinephrine (NE, 10(-6) M), carbachol (10(-6) M), and sodium nitroprusside (10(-5) M), as well as by dense staining for mitochondrial activity and a low occurrence of cell necrosis. Cell proliferation was examined by incorporation of bromodeoxyuridine (BrdU). Results showed that arteries maintain normal structure and viability after 5 days in organ culture. Both the stretched and control arteries demonstrated significant contractile responses. For example, both stretched and control arteries showed approximately 10% diameter contraction in response to NE. Stretched arteries contained 8% BrdU-positive cells compared to 5% in controls (p<0.05). These results indicate that longitudinal stretch promotes cell proliferation in arteries while maintaining arterial function.
Collapse
MESH Headings
- Adaptation, Physiological/drug effects
- Adaptation, Physiological/physiology
- Animals
- Carbachol/pharmacology
- Carotid Arteries/cytology
- Carotid Arteries/drug effects
- Carotid Arteries/physiology
- Cell Division/drug effects
- Cell Division/physiology
- Cell Survival/drug effects
- Cell Survival/physiology
- Elasticity
- Mechanotransduction, Cellular/drug effects
- Mechanotransduction, Cellular/physiology
- Muscle, Smooth, Vascular/cytology
- Muscle, Smooth, Vascular/drug effects
- Muscle, Smooth, Vascular/physiology
- Nitroprusside/pharmacology
- Norepinephrine/pharmacology
- Organ Culture Techniques/methods
- Physical Stimulation/methods
- Stress, Mechanical
- Swine
- Tissue Engineering/methods
- Vasoconstriction/drug effects
- Vasoconstriction/physiology
Collapse
|
63
|
Lutostansky EM, Karner G, Rappitsch G, Ku DN, Perktold K. Analysis of hemodynamic fluid phase mass transport in a separated flow region. J Biomech Eng 2003; 125:189-96. [PMID: 12751280 DOI: 10.1115/1.1543547] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
The mass transfer behavior in the recirculation region downstream of an axisymmetric sudden expansion was examined. The Reynolds number, 500, and Schmidt number, 3200, were selected to model the mass transfer of molecules, such as ADP, in the arterial system. In a first step the transient mass transport applying zero diffusive flux at the wall was analyzed using experiments and two computational codes. The two codes were FLUENT, a commercially available finite volume method, and FTSP, a finite element code developed at Graz University of Technology. The comparison of the transient wall concentration values determined by the three methods was excellent and provides a measure of confidence for computational mass transfer calculations in convection dominated, separated flows. In a second step the effect of the flow separation on the stationary mass transport applying a permeability boundary condition at the water-permeable wall was analyzed using the finite element code FTSP. The results show an increase of luminal ADP surface concentration in the upstream and in the downstream tube of the sudden expansion geometry in the range of six and twelve percent of the bulk flow concentration. The effect of flow separation in the downstream tube on the wall concentration is a decrease of about ten percent of the difference between wall concentration and bulk concentration occurring at nearly fully developed flow at the downstream region at a distance of 66 downstream tube diameters from the expansion. The decrease of ADP flux into the wall is in the range of three percent of the flux at the downstream region.
Collapse
|
64
|
Han HC, Oshinski JN, Ku DN, Pettigrew RI. A left ventricle model to predict post-revascularization ejection fraction based on cine magnetic resonance images. J Biomech Eng 2002; 124:52-5. [PMID: 11871605 DOI: 10.1115/1.1428555] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
The left ventricular ejection fraction (LVEF) is an important clinical indicator of the cardiac function and long-term outcome for patients with coronary artery disease. A biomechanical model of the left ventricle was developed to quantitatively predict post-revascularization LVEF based on noninvasive magnetic resonance imaging. The myocardium was categorized into normal, hibernating, and infarcted regions from the ventricular short-axis images. Assuming that hibernating tissue would potentially regain contractility after revascularization, the expected maximum post-revascularization LVEF was calculated for four patients with chronic left ventricular dysfunction. The predictions were within three ejection fraction points of the follow-up LVEFs. This model may be useful to estimate the outcome and efficacy of revascularization plans.
Collapse
|
65
|
Abstract
The cardiovascular system is an internal flow loop with multiple branches circulating a complex liquid. The hallmarks of blood flow in arteries are pulsatility and branches, which cause wall stresses to be cyclical and nonuniform. Normal arterial flow is laminar, with secondary flows generated at curves and branches. Arteries can adapt to and modify hemodynamic conditions, and unusual hemodynamic conditions may cause an abnormal biological response. Velocity profile skewing can create pockets in which the wall shear stress is low and oscillates in direction. Atherosclerosis tends to localize to these sites and creates a narrowing of the artery lumen--a stenosis. Plaque rupture or endothelial injury can stimulate thrombosis, which can block blood flow to heart or brain tissues, causing a heart attack or stroke. This small lumen and elevated shear rate in a stenosis create conditions that accelerate platelet accumulation and occlusion. The relationship between thrombosis and fluid mechanics is complex, especially in the post-stenotic flow field. New convection models have been developed to predict clinical from platelet thrombosis in diseased arteries. Future hemodynamic studies should address the complex mechanics of flow-induced, large-scale wall motion and convection of semisolid particles and cells in flowing blood.
Collapse
|
66
|
Tang D, Yang C, Kobayashi S, Ku DN. Steady flow and wall compression in stenotic arteries: a three-dimensional thick-wall model with fluid-wall interactions. J Biomech Eng 2001; 123:548-57. [PMID: 11783725 DOI: 10.1115/1.1406036] [Citation(s) in RCA: 56] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Severe stenosis may cause critical flow and wall mechanical conditions related to artery fatigue, artery compression, and plaque rupture, which leads directly to heart attack and stroke. The exact mechanism involved is not well understood. In this paper a nonlinear three-dimensional thick-wall model with fluid-wall interactions is introduced to simulate blood flow in carotid arteries with stenosis and to quantify physiological conditions under which wall compression or even collapse may occur. The mechanical properties of the tube wall were selected to match a thick-wall stenosis model made of PVA hydrogel. The experimentally measured nonlinear stress-strain relationship is implemented in the computational model using an incremental linear elasticity approach. The Navier-Stokes equations are used for the fluid model. An incremental boundary iteration method is used to handle the fluid-wall interactions. Our results indicate that severe stenosis causes considerable compressive stress in the tube wall and critical flow conditions such as negative pressure, high shear stress, and flow separation which may be related to artery compression, plaque cap rupture, platelet activation, and thrombus formation. The stress distribution has a very localized pattern and both maximum tensile stress (five times higher than normal average stress) and maximum compressive stress occur inside the stenotic section. Wall deformation, flow rates, and true severities of the stenosis under different pressure conditions are calculated and compared with experimental measurements and reasonable agreement is found.
Collapse
|
67
|
Oshinski JN, Han HC, Ku DN, Pettigrew RI. Quantitative prediction of improvement in cardiac function after revascularization with MR imaging and modeling: initial results. Radiology 2001; 221:515-22. [PMID: 11687698 DOI: 10.1148/radiol.2212010124] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
PURPOSE To evaluate a model that can be used quantitatively to predict changes in postrevascularization left ventricular function based on classification of myocardial tissue as hibernating, scarred, or normal with cine magnetic resonance (MR) imaging. MATERIALS AND METHODS Eleven patients with chronic left ventricular dysfunction were studied before and after revascularization with cine MR imaging. Regional myocardial contractility and wall thickness were used in the model to predict postrevascularization ejection fraction (EF). The actual EF from the postrevascularization MR images was compared with the EF from the prerevascularization images predicted with the model by using regression analysis and Bland-Altman analysis. RESULTS Correlation between the actual EF after revascularization and the EF predicted by using the model yielded an R value of 0.98, with a standard error of 1.3 EF percentage points. Predicting changes in function in a myocardial segment was less successful because only 55% of segments classified as hibernating actually improved resting function after revascularization. In nonimproved segments, 78% were either adjacent to infarcted segments or had nontransmural wall thinning. CONCLUSION A simple mathematical model combined with functional information provided by MR imaging was used to predict improvements in global EF resulting from revascularization.
Collapse
|
68
|
Han HC, Ku DN. Contractile responses in arteries subjected to hypertensive pressure in seven-day organ culture. Ann Biomed Eng 2001; 29:467-75. [PMID: 11459340 DOI: 10.1114/1.1376391] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Early stage changes in hypertensive arteries have a significant effect on the long-term adaptation of the arteries. Compared to the long-term adaptation, little is known about the early dimensional and functional changes in hypertensive arteries in the first few days of hypertension. To study the early stage changes in hypertensive arteries, porcine common carotid arteries were cultured for seven days in a simplified ex vivo artery organ culture system with pulsatile flow under hypertensive (200+/-30 mm Hg) or normotensive (100+/-20 mm Hg) pressure conditions while maintaining a physiological mean wall shear stress of 15 dyn/cm2. Vessel viability was demonstrated by contractile diameter responses to norepinephrine (NE), carbachol (CCh), and sodium nitroprusside (SNP) as well as staining for mitochondrial activity and cell apoptosis/necrosis. The results show that arteries demonstrated strong contractile responses to NE, CCh, and SNP, basal tone, and viable mitochondria in the organ culture system for seven days. Hypertensive arteries demonstrated a stronger contractile response than normotensive arteries (p<0.05). Diameter enlargement was observed in hypertensive arteries as compared to arteries cultured under normotensive conditions. In conclusion, the pulsatile culture system can maintain arteries viable with active vasomotion tone for up to seven days. Hypertensive pressure causes arterial adaptation by significantly increasing arterial diameter and contractile response within the first seven days.
Collapse
MESH Headings
- Adaptation, Physiological
- Biomedical Engineering
- Carbachol/pharmacology
- Carotid Artery, Common/drug effects
- Carotid Artery, Common/pathology
- Carotid Artery, Common/physiopathology
- Hypertension/pathology
- Hypertension/physiopathology
- Muscle, Smooth, Vascular/drug effects
- Muscle, Smooth, Vascular/pathology
- Muscle, Smooth, Vascular/physiopathology
- Nitroprusside/pharmacology
- Norepinephrine/pharmacology
- Organ Culture Techniques
- Perfusion
- Pulsatile Flow
- Time Factors
- Vasoconstriction/drug effects
- Vasoconstriction/physiology
Collapse
|
69
|
Wootton DM, Markou CP, Hanson SR, Ku DN. A mechanistic model of acute platelet accumulation in thrombogenic stenoses. Ann Biomed Eng 2001; 29:321-9. [PMID: 11339329 DOI: 10.1114/1.1359449] [Citation(s) in RCA: 78] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Thrombosis on an atherosclerotic lesion can cause heart attack or stroke. Thrombosis may be triggered by plaque rupture or erosion, creating a thrombogenic stenosis. To measure and model this situation, collagen-coated stenoses have been exposed to nonanticoagulated blood in a baboon ex vivo shunt. The maximum rate of platelet accumulation, measured using a gamma camera, was highest in the throat region of moderate and severe stenoses, and increased with increasing stenosis severity. A species transport model of platelet accumulation was developed, which included mechanisms of convection, shear-enhanced diffusion, near-wall platelet concentration, and a kinetic model of platelet activation and aggregation. The model accurately reproduced the average spatial pattern and time rate of platelet accumulation in the upstream and throat regions of the stenosis, where shear-enhanced diffusivity increased platelet transport in the stenosis throat. Downstream of the throat where flow is complicated by recirculation, the model computed a transport-limited region with lower than measured platelet accumulation, suggesting that fluid-phase platelet activation may significantly affect both transport and adhesion rates in the poststenotic region. This model may provide an initial quantitative estimate of the likelihood of occlusive thrombus in individual patients due to plaque erosion, artery spasm, incomplete angioplasty, or plaque rupture.
Collapse
|
70
|
Stammen JA, Williams S, Ku DN, Guldberg RE. Mechanical properties of a novel PVA hydrogel in shear and unconfined compression. Biomaterials 2001; 22:799-806. [PMID: 11246948 DOI: 10.1016/s0142-9612(00)00242-8] [Citation(s) in RCA: 359] [Impact Index Per Article: 15.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
Poly(vinyl alcohol) (PVA) hydrogels have been proposed as promising biomaterials to replace diseased or damaged articular cartilage. A critical barrier to their use as load-bearing tissue replacements is a lack of sufficient mechanical properties. The purpose of this study was to characterize the functional compressive and shear mechanical properties of a novel PVA hydrogel. Two formulations of the biomaterial were tested, one with a lower water content (75% water), and the other with higher water content (80% water). The compressive tangent modulus varied with biomaterial formulation and was found to be statistically strain magnitude and rate dependent. Over a strain range of 10-60%, the compressive modulus increased from approximately 1-18 MPa, which is within the range of the modulus of articular cartilage. The shear tangent modulus (0.1-0.4 MPa) was also found to be strain magnitude dependent and within the range of normal human articular cartilage, but it was not statistically dependent on strain rate, This behavior was attributed to the dominance of fluid flow and related frictional drag on the viscoelastic behavior. Compressive failure of the hydrogels was found to occur between 45 and 60% strain, depending on water content.
Collapse
|
71
|
Mavromatis K, Fukai T, Tate M, Chesler N, Ku DN, Galis ZS. Early effects of arterial hemodynamic conditions on human saphenous veins perfused ex vivo. Arterioscler Thromb Vasc Biol 2000; 20:1889-95. [PMID: 10938008 DOI: 10.1161/01.atv.20.8.1889] [Citation(s) in RCA: 37] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Exposure to the arterial hemodynamic environment is thought to be a potential trigger for the pathological remodeling of saphenous vein grafts. Using matched pairs of freshly isolated human saphenous vein, we analyzed the early effects of ex vivo hemodynamic conditions mimicking the venous (native) compared with arterial (graft) environment on the key components of vascular remodeling, ie, matrix metalloproteinase (MMP)-9 and MMP-2 and cell proliferation. Interestingly, we found that arterial conditions halved latent MMP-9 (50+/-11%, P=0.01) and MMP-2 (44+/-6%, P=0.005) levels relative to matched vein pairs maintained ex vivo under venous perfusion for up to 3 days. Immunostaining supported decreased MMP levels in the innermost area of arterially perfused veins. Either decreased synthesis or increased posttranslational processing may decrease MMP zymogen levels. Biosynthetic radiolabeling showed that arterial perfusion actually increased MMP-9 and MMP-2 production. When we then examined potential pathways for MMP zymogen processing, we found that arterial conditions did not affect the expression of MT-MMP-1, a cell-associated MMP activator, but that they significantly increased the levels of superoxide, another MMP activator, suggesting redox-dependent MMP processing. Additional experiments indicated that increased superoxide under arterial conditions was due to diminished scavenging by decreased extracellular superoxide dismutase. Arterial perfusion also stimulated cell proliferation (by 220% to 750%) in the majority of vein segments investigated. Our observations support the hypothesis that arterial hemodynamic conditions stimulate early vein graft remodeling. Furthermore, physiological arterial flow may work to prevent pathological remodeling, particularly the formation of intimal hyperplasia, through rapid inactivation of secreted MMPs and, possibly, through preferential stimulation of cell proliferation in the outer layers of the vein wall.
Collapse
|
72
|
Chesler NC, Ku DN, Galis ZS. Transmural pressure induces matrix-degrading activity in porcine arteries ex vivo. THE AMERICAN JOURNAL OF PHYSIOLOGY 1999; 277:H2002-9. [PMID: 10564157 DOI: 10.1152/ajpheart.1999.277.5.h2002] [Citation(s) in RCA: 57] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Extracellular matrix components must be degraded and resynthesized for vascular remodeling to occur. We hypothesized that the hemodynamic environment regulates activity of matrix metalloproteinases (MMPs), the primary agents for in vivo matrix degradation, during vascular remodeling in response to changes in transmural pressure and shear stress. Pathological hemodynamic conditions were reproduced in an ex vivo system in which we maintained porcine carotid arteries for 24 and 48 h. Total levels of MMP-2 and MMP-9 extracted from tissue homogenates and analyzed by SDS-PAGE zymography were stimulated by transmural pressure and were unaffected by shear stress changes. Degradation of two specific gelatinase substrates, gelatin and elastin, increased with increasing pressure, but the degradation was not affected by shear stress changes in tissue specimens analyzed using in situ zymography (gelatin) and fluorescent measurement of endogenous elastin degradation (elastin). Our results suggest that transmural pressure activates at least two members of the MMP family and that activity of these enzymes is accompanied by degradation of matrix components, effects that may be implicated in hypertensive vascular remodeling.
Collapse
|
73
|
Tang D, Yang J, Yang C, Ku DN. A nonlinear axisymmetric model with fluid-wall interactions for steady viscous flow in stenotic elastic tubes. J Biomech Eng 1999; 121:494-501. [PMID: 10529916 DOI: 10.1115/1.2835078] [Citation(s) in RCA: 37] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Arteries with high-grade stenoses may compress under physiologic conditions due to negative transmural pressure caused by high-velocity flow passing through the stenoses. To quantify the compressive conditions near the stenosis, a nonlinear axisymmetric model with fluid-wall interactions is introduced to simulate the viscous flow in a compliant stenotic tube. The nonlinear elastic properties of the tube (tube law) are measured experimentally and used in the model. The model is solved using ADINA (Automatic Dynamic Incremental Nonlinear Analysis), which is a finite element package capable of solving problems with fluid-structure interactions. Our results indicate that severe stenoses cause critical flow conditions such as negative pressure and high and low shear stresses, which may be related to artery compression, plaque cap rupture, platelet activation, and thrombus formation. The pressure filed near a stenosis has a complex pattern not seen in one-dimensional models. Negative transmural pressure as low as -24 mmHg for a 78 percent stenosis by diameter is observed at the throat of the stenosis for a downstream pressure of 30 mmHg. Maximum shear stress as a high as 1860 dyn/cm2 occurs at the throat of the stenoses, while low shear stress with reversed direction is observed right distal to the stenosis. Compressive stresses are observed inside the tube wall. The maximal principal stress and hoop stress in the 78 percent stenosis are 80 percent higher than that from the 50 percent stenosis used in our simulation. Flow rates under different pressure drop conditions are calculated and compared with experimental measurements and reasonable agreement is found for the prebuckling stage.
Collapse
|
74
|
Markou CP, Lutostansky EM, Ku DN, Hanson SR. A novel method for efficient drug delivery. Ann Biomed Eng 1998; 26:502-11. [PMID: 9570232 DOI: 10.1114/1.97] [Citation(s) in RCA: 19] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Local delivery of anti-thrombotic and anti-restenotic drugs is desired to achieve high concentrations of agents which may be rapidly degraded systemically or which exhibit very short half-lives in vivo. In this article, the operating characteristics of a novel local drug delivery method are described and its effectiveness demonstrated computationally and experimentally. Computational models used a finite volume method to determine the concentration field. Optical dye density measurements of Evans blue in saline were performed in an in vitro steady flow system. Modeling parameters were kept in the physiologic range. Experimental flow visualization studies demonstrated high concentrations of infusate near the vessel wall. Computational studies predicted high, clinically significant drug concentrations along the wall downstream of the infusion device. When the radial infusion velocity is large (infusion flow rate, Qinf>0.5% of the main flow rate, Q), the wall concentration of the infused drug remains high, e.g., levels are greater than 80% of the infusate concentration 5 cm downstream of the infusion device. At lower infusion rates (Qinf<0.001Q), the drug concentration at the wall decreases exponentially with axial distance to less than 25% of the infusate concentration 5 cm downstream of the infusion device, although therapeutic drug levels are still readily maintained. The near wall drug concentration is a function of flow conditions, infusion rate, and the drug diffusivity. Good agreement was obtained between computational and experimental concentration measurements. Flow simulation and experimental results indicate that the technique can effectively sustain high local drug concentrations for inhibition of thrombosis and vascular lesion formation.
Collapse
|
75
|
Downing JM, Ku DN. Effects of frictional losses and pulsatile flow on the collapse of stenotic arteries. J Biomech Eng 1997; 119:317-24. [PMID: 9285345 DOI: 10.1115/1.2796096] [Citation(s) in RCA: 34] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
High-grade stenosis can produce conditions in which the artery may collapse. A one-dimensional numerical model of a compliant stenosis was developed from the collapsible tube theory of Shapiro. The model extends an earlier model by including the effects of frictional losses and unsteadiness. The model was used to investigate the relative importance of several physical parameters present in the in vivo environment. The results indicated that collapse can occur within the stenosis. Frictional loss was influential in reducing the magnitude of collapse. Large separation losses could prevent collapse outright even with low downstream resistances. However, the degree of stenosis was still the primary parameter governing the onset of collapse. Pulsatile solutions demonstrated conditions that produce cyclic collapse within the stenosis. This study predicts certain physiologic conditions in which collapse of arteries may occur for high-grade stenoses.
Collapse
|