Micro-organism and Cell Viability on Antimicrobially Modified Titanium

When titanium is anodized by discharge in NaCl solution, both antimicrobial activity and osteoconductivity are conferred. The viability of adherent micro-organisms and cells on antimicrobial titanium remains uncertain. We hypothesized that a thin peroxidation barrier would efficiently destroy adherent bacteria, whereas adherent osteoblastic cells would be viable, since these cells adhere to the surface indirectly though serum proteins. The efficacy of antimicrobial titanium appears to be based on peroxidation, since peroxidation products were detected in parallel with the destruction of bacterial cell-surface structures. The peroxidation effect of antimicrobial titanium was confined to the surface within narrow limits. The viability of osteoblastic cells on the surface was strongly dependent on the presence of serum protein, whereas that of adherent Streptococcus mutans was not affected by the presence of serum proteins. Therefore, differences in the adherent systems used by bacteria and osteoblastic cells are important determinants of their viability on antimicrobial titanium.

Loosening xyloglucan accelerates the enzymatic degradation of cellulose in wood

In order to create trees in which cellulose, the most abundant component in biomass, can be enzymatically hydrolyzed highly for the production of bioethanol, we examined the saccharification of xylem from several transgenic poplars, each overexpressing either xyloglucanase, cellulase, xylanase, or galactanase. The level of cellulose degradation achieved by a cellulase preparation was markedly greater in the xylem overexpressing xyloglucanase and much greater in the xylems overexpressing xylanase and cellulase than in the xylem of the wild-type plant. Although a high degree of degradation occurred in all xylems at all loci, the crystalline region of the cellulose microfibrils was highly degraded in the xylem overexpressing xyloglucanase. Since the complex between microfibrils and xyloglucans could be one region that is particularly resistant to cellulose degradation, loosening xyloglucan could facilitate the enzymatic hydrolysis of cellulose in wood.

Xyloglucan for generating tensile stress to bend tree stem

In response to environmental variation, angiosperm trees bend their stems by forming tension wood, which consists of a cellulose-rich G (gelatinous)-layer in the walls of fiber cells and generates abnormal tensile stress in the secondary xylem. We produced transgenic poplar plants overexpressing several endoglycanases to reduce each specific polysaccharide in the cell wall, as the secondary xylem consists of primary and secondary wall layers. When placed horizontally, the basal regions of stems of transgenic poplars overexpressing xyloglucanase alone could not bend upward due to low strain in the tension side of the xylem. In the wild-type plants, xyloglucan was found in the inner surface of G-layers during multiple layering. In situ xyloglucan endotransglucosylase (XET) activity showed that the incorporation of whole xyloglucan, potentially for wall tightening, began at the inner surface layers S1 and S2 and was retained throughout G-layer development, while the incorporation of xyloglucan heptasaccharide (XXXG) for wall loosening occurred in the primary wall of the expanding zone. We propose that the xyloglucan network is reinforced by XET to form a further connection between wall-bound and secreted xyloglucans in order to withstand the tensile stress created within the cellulose G-layer microfibrils.

Use of an immunochromatographic kit for the rapid detection of Mycobacterium tuberculosis from broth cultures

In settings of high human immunodeficiency virus (HIV) prevalence, culture confirmation, preferably by liquid culture, is required for the diagnosis of tuberculosis (TB). However, long delays with phenotypic identification offsets the short turnaround time of liquid cultures. We report here the advantages of using a commercial immunochromatographic (ICT) assay targeting the Mycobacterium tuberculosis protein 64 (MPT-64) Ag and compare it with the Accuprobe MTB complex molecular probe assay. The performance of the ICT kit was excellent, with sensitivity, specificity, positive and negative predictive values of respectively 97%, 100%, 100%, and 92%. The kit requires a 15-min assay time, is easy to perform and is a good method for simplifying the diagnosis of TB.

Does removable partial denture quality affect individuals' oral health?

The impact of oral disorders and interventions on individuals' perceived oral health and oral-health-related quality of life (OHRQoL) is being increasingly recognized as an important health component. This study examined the association between denture quality and OHRQoL in individuals wearing removable partial dentures (RPDs). The study participants were 245 consecutive patients (mean age: 63.3 +/- 8.7 yrs) at a university-based prosthodontic clinic who wore RPDs for more than one month. RPD quality and OHRQoL were determined by means of a 100-mm visual analog scale (VAS) and the 49-item Oral Health Impact Profile-Japanese version (OHIP-J49), respectively. Linear regression analysis between RPD quality and OHRQoL revealed that a 10-mm VAS increase in RPD quality rating was related to -2.8 OHIP-J49 units (95% confidence interval: -4.5 to -1.1, p = 0.001), which represents an improvement in OHRQoL. The results suggest that RPD quality influences individuals' OHRQoL to a clinically significant extent.

Feasibility of oral health-related quality of life assessment in prosthodontic patients using abbreviated Oral Health Impact Profile questionnaires

To report about the feasibility of oral health-related quality of life assessment using two short forms of the Oral Health Impact Profile - OHIP-J14 and OHIP-J5 - in prosthodontic patients. Using the item pool of the Japanese version of the OHIP, two short forms based on a 14-item English-language version and a 5-item German-language questionnaire were derived. To test construct validity, the associations between summary scores of two short versions and self-reported oral health and self-reported denture quality have been investigated. Responsiveness was tested in 30 patients treated for their removable partial denture. Test-retest reliability using a time interval of 2 weeks and internal consistency were also tested. Associations between the two short form summary scores and self-reported oral health and denture quality supported construct validity of the instruments. Acceptable reliability for OHIP-J14 and OHIP-J5 was indicated by intra-class correlation coefficients of 0.73 and 0.75 (test-retest reliability) and CRONBACH'S alpha of 0.94 and 0.81 (internal consistency) respectively. Responsiveness was sufficient for OHIP-J14 and OHIP-J5 indicated by 'medium' effect sizes (0.50 and 0.57 respectively). In addition to sufficient discriminative psychometric properties, the ability to measure change of perceived oral health make OHIP-J14 and OHIP-J5 suitable for outcomes research.

The characterization of PCDDs, PCDFs and coplanar PCBs during the past 50 years in Gwangyang Bay, South Korea

The PCDD/DFs and coplanar PCBs (co-PCBs) in sediment samples from Gwangyang Bay in South Korea was investigated. The total concentration of dioxins and their toxic equivalent quantity (TEQ; calculated with the WHO 2005 Toxic Equivalency Factors) value in the surface sediment of the outer site (261 pg g(-1) TOC, 4.4 pg-TEQ g(-1)) were 3-fold higher than the inner site (90 pg g(-1) TOC, 1.1 pg-TEQ g(-1)) in the Bay. The dioxin in the sediment samples was found to come from a mixture of the impurities of pentachlorophenol (PCP), chloronitrofen (CNP) and combustion based on the result of hierarchical cluster analysis (HCA). These dioxin sources have been influenced by the characterization associated with this region which was both an agricultural-centered and industrial-centered area. According to principal component analysis (PCA) related to the Kow values for the congener-specific composition of co-PCBs in the sediment core, the Kanechlor (KC)-500 and the atmospheric deposition were identified as the possible sources. The maximum burden in the sediment core was 1.3 kg for 1967-1974 and the total burdens of PCDD/DFs and co-PCBs in the sediment core were estimated to be 6.6 kg during the past 50 years. The cumulative burdens of dioxin are still increasing in Gwangyang Bay.

Overexpression of poplar cellulase accelerates growth and disturbs the closing movements of leaves in sengon

In this study, poplar (Populus alba) cellulase (PaPopCel1) was overexpressed in a tropical Leguminosae tree, sengon (Paraserianthes falcataria), by the Agrobacterium tumefaciens method. PaPopCel1 overexpression increased the length and width of stems with larger leaves, which showed a moderately higher density of green color than leaves of the wild type. The pairs of leaves on the transgenic plants closed more slowly during sunset than those on the wild-type plants. When main veins from each genotype were excised and placed on a paper towel, however, the leaves of the transgenic plants closed more rapidly than those of the wild-type plant. Based on carbohydrate analyses of cell walls, the leaves of the transgenic plants contained less wall-bound xyloglucan than those of the wild-type plants. In situ xyloglucan endotransglucosylase activity showed that the incorporation of whole xyloglucan, potentially for wall tightening, occurred in the parenchyma cells (motor cells) of the petiolule pulvinus attached to the main vein, although the transgenic plant incorporated less whole xyloglucan than the wild-type plant. These observations support the hypothesis that the paracrystalline sites of cellulose microfibrils are attacked by poplar cellulase, which loosens xyloglucan intercalation, resulting in an irreversible wall modification. This process could be the reason why the overexpression of poplar cellulase both promotes plant growth and disturbs the biological clock of the plant by altering the closing movements of the leaves of the plant.

Effect of direct retainer and major connector designs on RPD and abutment tooth movement dynamics

Designs of removable partial dentures are suggested to affect the mobility of abutment teeth and removable partial denture (RPD) during oral functions. This study aimed to examine the effect of direct retainer and major connector designs on RPD dynamics under simulated loading. Six different Kennedy class II maxillary RPDs were fabricated on a maxillary model. These dentures involved 3 different direct retainers (wrought-wire clasp, RPA clasp, and conical crown telescopic retainer) and 2 different major connectors (Co-Cr major connector and heat-cured acrylic resin with a metal strengthener). Using an experimental model with simulated periodontal ligaments and mucosa that were fabricated using silicone impression material, three-dimensional displacements of the RPDs were measured under a simulated 30-N loading with a displacement transducer type M-3. Significant effects of "direct retainer design" on bucco-palatal displacements and "major connector" on mesio-distal displacements were revealed by 2 x 3 two-way analysis of variance of abutment teeth movements (P < 0.001 and P = 0.002, respectively). Additionally, analysis of variance of RPD displacements revealed significant effects of "direct retainer design" on corono-apical displacements and "major connector" on mesio-distal displacements (P = 0.001 and P = 0.028, respectively). Rigid direct retainers and rigid major connectors decrease the movements of both abutment tooth and RPD.

Influence of altered occlusal guidance on masticatory muscle activity during clenching

This study investigated the influence of experimentally altered occlusal guidance on masticatory muscle activity. Twenty healthy human subjects (15 males and five females with an average age of 26.5 years) volunteered to participate in this study. Metallic occlusal overlays were fabricated for the lower working side canine and overlaid on the second molar and the non-working side second molar to simulate a canine-protected occlusion, group function occlusion and bilateral balanced occlusion. Electromyography (EMG) activities in the bilateral masseter, anterior and posterior temporalis were recorded during maximal clenching. The experimental occlusal pattern revealed to have statistically significant effects on EMG activity. As the most characteristic change, EMG activity in the anterior temporalis significantly increased in the simulated group function occlusion and the simulated bilateral balanced occlusion compared with the simulated cuspid protected occlusion. The increased teeth contacts to the posterior region altered the unilateral pattern of the anterior temporalis activity to the bilateral pattern, while that of masseter activity remained unchanged.

Standardization of three-dimensional images in obstetrics and gynecology: consensus statement

Standardization of the display of ultrasound images has so far only been achieved in transabdominal two-dimensional (2D) sonography. In contrast, there is a lack of uniformity in the demonstration of transvaginal 2D ultrasound images. The described non-uniformity frequently leads to confusion in the assessment of an image, in particular with regard to the accurate anatomical assignment of left/right and dorsal/ventral. Three-dimensional (3D) sonography offers a unique opportunity to avoid this confusion in the interpretation of ultrasound images, because, independent of primary volume acquisition, the volume can always be rotated so that the stored object can at all times be visualized in a known anatomical position, rendering it of no importance whether the image acquired transvaginally is demonstrated from above or from below. This will also be important in allowing fusion of ultrasound image data with computed tomographic, magnetic resonance and/or positron emission tomography images. In this article we suggest that standardization of transabdominal and transvaginal 3D images does not only provide the inexperienced physician/sonographer with a guide to spatial orientation, but also serves to avoid erroneous topographical interpretations.

A novel DISC1-interacting partner DISC1-Binding Zinc-finger protein: implication in the modulation of DISC1-dependent neurite outgrowth

Disrupted-in-schizophrenia 1 (DISC1) is a gene disrupted by a (1;11) (q42.1;q14.3) translocation that segregates with major psychiatric disorders in a Scottish family. To investigate how DISC1 confers susceptibility to psychiatric disorders, we previously identified fasciculation and elongation protein zeta-1 and Kendrin as DISC1-interacting molecules in a yeast two-hybrid screen of a human brain complementary DNA library. Here, we have further identified a novel DISC1-interacting protein, termed DISC1-Binding Zinc-finger protein (DBZ), which has a predicted C(2)H(2)-type zinc-finger motif and coiled-coil domains. DBZ was co-immunoprecipitated with DISC1 in lysates of PC12 cells and rat brain tissue. The domain of DISC1 interacting with DBZ was close to the translocation breakpoint in the DISC1 gene. DBZ messenger RNA (mRNA) was expressed in human brains, but not in peripheral tissues. In situ hybridization revealed high expression of DBZ mRNA in the hippocampus, olfactory tubercle, cerebral cortex and striatum in rats. Because this pattern of localization was similar to that of the pituitary adenylate cyclase (PAC(1)) receptor for pituitary adenylate cyclase-activating polypeptide (PACAP), which has recently been implicated in neuropsychological functions, we examined whether DISC1/DBZ interaction was involved in the PACAP signaling pathway. PACAP upregulated DISC1 expression and markedly reduced the association between DISC1 and DBZ in PC12 cells. A DISC1-binding domain of DBZ reduced the neurite length in PC12 cells after PACAP stimulation and in primary cultured hippocampal neurons. The present results provide some new molecular insights into the mechanisms of neuronal development and neuropsychiatric disorders.

Japanese version of the Oral Health Impact Profile (OHIP-J)

The objective of the study was to develop a Japanese version of the Oral Health Impact Profile (OHIP). The original 49 items were translated using a forward-backward method following accepted cultural adaptation guidelines. A de novo development of Japanese items was conducted to establish content validity. The associations between the OHIP summary score and self-reported oral health (n = 220) and self-reported denture quality (n = 155) were investigated for construct validity. The association between the OHIP summary score and six oral conditions (n = 227) were also tested. The responsiveness of the instrument was established by comparing the score before and after using newly fabricated removable partial dentures (n = 30). The test-retest reliability (n = 37) and internal consistency (n = 251) were also calculated. After the de novo development, five new items were added to the OHIP. The priori hypothesized associations between the OHIP score and oral health conditions were confirmed (P < 0.001). The change in the OHIP scores from 63.6 to 40.6 (P < 0.001) supports the responsiveness of the instrument. Intra-class correlation coefficients of 0.81 and Cronbach's alpha of 0.98 indicate high test-retest reliability and internal consistency of the instrument's summary score. Sufficient discriminative and evaluative psychometric properties of the currently developed Japanese version of the OHIP in typical target populations make the instrument suitable for assessing the oral health-related quality of life in cross-sectional as well as longitudinal studies.

Misreporting of dietary energy, protein, potassium and sodium in relation to body mass index in young Japanese women

OBJECTIVE

Although under-reporting of dietary intake is more common in persons with a high body mass index (BMI), it is not well known whether or not misreporting is selective for different foods (and hence energy and nutrients), particularly in non-Western populations. We examined misreporting of dietary intake against biomarkers and its relation with BMI in young Japanese women.

DESIGN

Cross-sectional study.

SUBJECTS

A total of 353 female Japanese dietetic students aged 18-22 years (mean BMI: 21.4 kg/m(2), mean fat intake: 29.8% of energy).

METHODS

Misreporting of dietary energy, protein, potassium and sodium (assessed by a self-administered diet history questionnaire) was examined against respective biomarkers (estimated energy expenditure and 24-h urinary excretion). Reporting accuracy was calculated as the ratio of reported intake to that estimated from corresponding biomarkers (complete accuracy: 1.00).

RESULTS

Mean reporting accuracy of absolute intake (amount per day) varied considerably (0.86-1.14). Reporting accuracy of absolute intake decreased with increasing BMI (P for trend <0.001). However, no association was observed between reporting accuracy of energy-adjusted values and BMI (P for trend >0.15), indicating that BMI-dependent misreporting was canceled by energy adjustment. This was owing to positive correlation between the reporting accuracy of energy intake and that of absolute intake of the three nutrients (Pearson correlation coefficient: 0.49-0.67, P<0.0001).

CONCLUSIONS

Although differential misreporting of absolute intake was associated with BMI, differential misreporting of energy-adjusted value was not. These findings support the use of energy-adjusted values in the investigation of diet-disease relationships among lean populations with a low-fat intake.

The cationic cell-wall-peroxidase having oxidation ability for polymeric substrate participates in the late stage of lignification of Populus alba L

Previously we reported that purified Cell Wall Peroxidase-Cationic (CWPO-C) from poplar callus (Populus alba L.) oxidizes sinapyl alcohol and polymeric substrate unlike other plant peroxidases and proposed that this isoenzyme is a conceivable lignification specific peroxidase. In this study, we cloned full-length cDNA of CWPO-C and investigated the transcription of CWPO-C gene in various organs and the localization of CWPO-C protein in the differentiating xylem of poplar stem.Real-time PCR analyses indicated that CWPO-C gene is constitutively expressed in the developing xylem, leaf, and shoot but not affected by many stress treatments. Immunohistochemical analysis showed that CWPO-C locates in the middle lamellae, cell corners, and secondary cell walls of the fiber cells during the lignification. The intensity of the CWPO-C labeling increased gradually from the cell wall thickening stage to mature stage of fiber cells, which is very consistent with the increase of lignin content in the developing xylem. These results strongly support that CWPO-C is responsible for the lignification of the secondary xylem. Interestingly, immuno-labeling of CWPO-C was also observed inside of the ray parenchyma cells instead no signals were detected within the developing fiber cells. This suggests that CWPO-C is biosynthesized in the parenchyma cells and provided to the middle lamellae, the cell corners, and the cell walls to achieve lignin polymerization.

Photon emissions from rice cells elicited by N-acetylchitooligosaccharide are generated through phospholipid signaling in close association with the production of reactive oxygen species

Biophotons are ultraweak light emissions from biochemical reactions in a living body. They increase in suspension-cultured rice (Oryza sativa L.) cells when elicited by N-acetylchitooligosaccharide. Biochemical analyses were undertaken to investigate the relationship between disease response and biophotons in order to clarify the emission mechanism of biophotons caused by this elicitor. Photon emissions induced by N-acetylchitohexaose were suppressed when cells were pretreated with the reactive oxygen species (ROS)-generating inhibitors: pyrocatechol-3,5-disulfonic acid disodium salt (Tiron); diphenylene iodonium (DPI); and salicylhydroxamic acid (SHAM). Conversely, exogenously applied ROS (superoxide and hydrogen peroxide) were able to induce photon emissions. The effects of protein phosphorylation (K-252a) and the Ca(2+) signaling inhibitors, ethylene glycol-bis(beta-aminoethylether)-N,N,N',N'-tetraacetic acid (EGTA) and LaCl(3), caused photon emissions to decrease. It is clear that photon emissions from rice cells elicited by N-acetylchitohexaose are closely associated with the ROS-generating system, and are regulated by Ca(2+) signaling and protein phosphorylation. Exogenously applied phosphatidic acid (PA), the second messenger in the signal transduction of disease response, raised photon emissions in rice cells. Comparisons of photon emissions from PA and N-acetylchitohexaose regarding time courses, spectral compositions, and the inhibition ratios of several inhibitors, as well as a loss- and gain-of-function assay using the protein synthesis inhibitor cycloheximide (CHX) and PA, showed the possibility that photon emissions from rice cells elicited by N-acetylchitooligosaccharide were generated through PA, an intermediate of phospholipid signaling.

A phase II study of single-agent gefitinib as first-line therapy in patients with stage IV non-small-cell lung cancer

The aim of this study was to evaluate the efficacy and tolerability of gefitinib ('IRESSA') in Japanese patients with previously untreated stage IV non-small-cell lung cancer (NSCLC). This was a multi-institutional phase II study. Thirty-four patients with previously untreated stage IV NSCLC were enrolled between May 2003 and September 2004. Gefitinib was administered orally 250 mg once a day and was continued until there was either disease progression or severe toxicity. Objective tumour response rate was 26.5% (95% confidence interval, 11.7-41.3%). Adverse events were generally mild (National Cancer Institute-Common Toxicity Criteria grade 1 or 2) and consisted mainly of skin rash, fatigue and liver dysfunction. No pulmonary toxicity was observed. The global health status revealed that there was no change in quality of life during the study. This study found that single-agent gefitinib is active and well tolerated in chemo-naive Japanese patients with advanced NSCLC.

Subcellular localization of glyoxylate cycle key enzymes involved in oxalate biosynthesis of wood-destroying basidiomycete Fomitopsis palustris grown on glucose

This study investigated the subcellular localization of key enzymes of the glyoxylate cycle, i.e. isocitrate lyase (ICL; EC 4.1.3.1) and malate synthase (EC 2.3.3.9), that function constitutively in coordination with oxalate biosynthesis of glucose-grownFomitopsis palustris. The ICL purified previously fromF. palustrisis termed FPICL1. Subcellular fractionation analysis of the cell homogenate by the sucrose density-gradient method showed that both key enzymes were present in peroxisomes, whereas acetyl-CoA synthase (EC 6.2.1.1) and oxalate-producing oxaloacetate acetylhydrolase (EC 3.7.1.1) were cytosolic. The peroxisomal localization of FPICL1 was further confirmed by electron microscopic and immunocytochemical analysis with anti-FPICL1 antibody. In addition, the peroxisomal target signal, composed of SKL at the C terminus of the cDNA encoding FPICL1, was found, which also suggests that FPICL1 is peroxisomal. Accordingly, it is postulated that transportation of succinate from peroxisomes to mitochondria, and vice versa, for the transportation of isocitrate or citrate, occurs in glucose-grownF. palustrisfor the constitutive metabolic coordination of the TCA and glyoxylate cycles with oxalate biosynthesis.