Centimetre-scale micropore alignment in oriented polycrystalline metal-organic framework films via heteroepitaxial growth

The fabrication of oriented, crystalline films of metal-organic frameworks (MOFs) is a critical step toward their application to advanced technologies such as optics, microelectronics, microfluidics and sensing. However, the direct synthesis of MOF films with controlled crystalline orientation remains a significant challenge. Here we report a one-step approach, carried out under mild conditions, that exploits heteroepitaxial growth for the rapid fabrication of oriented polycrystalline MOF films on the centimetre scale. Our methodology employs crystalline copper hydroxide as a substrate and yields MOF films with oriented pore channels on scales that primarily depend on the dimensions of the substrate. To demonstrate that an anisotropic crystalline morphology can translate to a functional property, we assembled a centimetre-scale MOF film in the presence of a dye and showed that the optical response could be switched 'ON' or 'OFF' by simply rotating the film.

Fe3O4@HKUST-1 and Pd/Fe3O4@HKUST-1 as magnetically recyclable catalysts prepared via conversion from a Cu-based ceramic

A Fe₃O₄/Cu- ceramic system converted into a magnetic HKUST-1 composite was used as a recyclable catalyst for one-pot cascade and hydrogenation reactions.

An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors

This review highlights the steps needed to bring the properties of MOFs from the chemical lab to the microelectronics fab.

Correction: An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors

Correction for ‘An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors’ by Ivo Stassen et al., Chem. Soc. Rev., 2017, DOI: 10.1039/c7cs00122c.

Electrochemical sensing and catalysis using Cu3(BTC)2 coating electrodes from Cu(OH)2 films

Metal–organic framework (MOF) coatings were prepared on gold electrodes through the conversion from Cu(OH)₂ nanobelts to Cu₃(BTC)₂ MOFs.

Metal-Organic Framework Coatings as Cytoprotective Exoskeletons for Living Cells

The biomimetic mineralization of metal-organic framework (MOF) material on living cells is reported. ZIF-8 can be crystallized on a living cell surface as an exoskeleton that offers physical protection while allowing transport of essential nutrients, thus maintaining cell viability. The MOF shell prevents cell division, leading to an artificially induced pseudo-hibernation state. Cellular functions can be fully restored upon MOF removal.

Metal-Organic Framework Coatings as Cytoprotective Exoskeletons for Living Cells

The biomimetic mineralization of metal-organic framework (MOF) material on living cells is reported. ZIF-8 can be crystallized on a living cell surface as an exoskeleton that offers physical protection while allowing transport of essential nutrients, thus maintaining cell viability. The MOF shell prevents cell division, leading to an artificially induced pseudo-hibernation state. Cellular functions can be fully restored upon MOF removal.

Magnetic Metal-Organic Frameworks for Efficient Carbon Dioxide Capture and Remote Trigger Release

Magnetic metal-organic framework (MOF) composites show highly efficient CO2 desorption capacities upon their exposure to an alternating magnetic field, demonstrating a magnetic induction swing strategy for potentially low-energy regeneration of MOF adsorbents.

Chemical vapour deposition of zeolitic imidazolate framework thin films

Integrating metal-organic frameworks (MOFs) in microelectronics has disruptive potential because of the unique properties of these microporous crystalline materials. Suitable film deposition methods are crucial to leverage MOFs in this field. Conventional solvent-based procedures, typically adapted from powder preparation routes, are incompatible with nanofabrication because of corrosion and contamination risks. We demonstrate a chemical vapour deposition process (MOF-CVD) that enables high-quality films of ZIF-8, a prototypical MOF material, with a uniform and controlled thickness, even on high-aspect-ratio features. Furthermore, we demonstrate how MOF-CVD enables previously inaccessible routes such as lift-off patterning and depositing MOF films on fragile features. The compatibility of MOF-CVD with existing infrastructure, both in research and production facilities, will greatly facilitate MOF integration in microelectronics. MOF-CVD is the first vapour-phase deposition method for any type of microporous crystalline network solid and marks a milestone in processing such materials.

Emerging applications of metal–organic frameworks

Metal–organic frameworks are highly crystalline porous materials which present emerging opportunities in biotechnology, catalysis, microelectronics and photonics.

Facile stabilization of cyclodextrin metal–organic frameworks under aqueous conditions via the incorporation of C60 in their matrices

A facile method to improve the stability of γ-cyclodextrin metal–organic frameworks in an aqueous environment has been developed through the incorporation of hydrophobic C₆₀ in their matrices.

Enzyme encapsulation in zeolitic imidazolate frameworks: a comparison between controlled co-precipitation and biomimetic mineralisation

Recent studies have demonstrated that metal–organic frameworks can be employed as protective coatings for enzymes.

Biomimetic Replication of Microscopic Metal-Organic Framework Patterns Using Printed Protein Patterns

It is demonstrated that metal-organic frameworks (MOFs) can be replicated in a biomimetic fashion from protein patterns. Bendable, fluorescent MOF patterns are formed with micrometer resolution under ambient conditions. Furthermore, this technique is used to grow MOF patterns from fingerprint residue in 30 s with high fidelity. This technique is not only relevant for crime-scene investigation, but also for biomedical applications.

Biomimetic mineralization of metal-organic frameworks as protective coatings for biomacromolecules

Enhancing the robustness of functional biomacromolecules is a critical challenge in biotechnology, which if addressed would enhance their use in pharmaceuticals, chemical processing and biostorage. Here we report a novel method, inspired by natural biomineralization processes, which provides unprecedented protection of biomacromolecules by encapsulating them within a class of porous materials termed metal-organic frameworks. We show that proteins, enzymes and DNA rapidly induce the formation of protective metal-organic framework coatings under physiological conditions by concentrating the framework building blocks and facilitating crystallization around the biomacromolecules. The resulting biocomposite is stable under conditions that would normally decompose many biological macromolecules. For example, urease and horseradish peroxidase protected within a metal-organic framework shell are found to retain bioactivity after being treated at 80 °C and boiled in dimethylformamide (153 °C), respectively. This rapid, low-cost biomimetic mineralization process gives rise to new possibilities for the exploitation of biomacromolecules.

Tuning the phase transition of ZnO thin films through lithography: an integrated bottom-up and top-down processing

An innovative approach towards the physico-chemical tailoring of zinc oxide thin films is reported. The films have been deposited by liquid phase using the sol-gel method and then exposed to hard X-rays, provided by a synchrotron storage ring, for lithography. The use of surfactant and chelating agents in the sol allows easy-to-pattern films made by an organic-inorganic matrix to be deposited. The exposure to hard X-rays strongly affects the nucleation and growth of crystalline ZnO, triggering the formation of two intermediate phases before obtaining a wurtzite-like structure. At the same time, X-ray lithography allows for a fast patterning of the coatings enabling microfabrication for sensing and arrays technology.

Positioning of the HKUST-1 metal–organic framework (Cu3(BTC)2) through conversion from insoluble Cu-based precursors

A Cu-based metal–organic framework (HKUST-1) was synthesized from insoluble precursors and positioned using sol–gel based coatings.

Evaluation of coupling protocols to bind beta-glucosidase on magnetic nanoparticles

Beta-Glucosidase has been chosen as a model biomolecule to establish a general protocol for binding enzymes on both ferromagnetic and superparamagnetic nano-particles for sensing applications. Using EDC (1-(3-dimethyl-aminopropyl)-3-ethylcarbodiimide) or SMCC (Succinimidyl-4-(N-maleimidomethyl)cyclohexane-1-carboxylate) as coupling agents, we compared two different methods for the fabrication of enzyme-decorated magnetic nanoparticles. We identified the best conditions for the preparation of a responsive bioactive magnetic system comparing different covalent bio-grafting protocols. The enzymatic test has been performed using beta-Glucosidase. The systems were characterized using scanning electron microscopy, infrared spectroscopy, and the enzyme loading was measured by a glucose assay in the presence of the enzyme-decorated magnetic particles. Although the faster response of ferromagnetic particles to the magnetic field, the assay results suggested that the superparamagnetic particles are more efficient carriers. In fact, the best enzymatic activity was measured on superparamagnetic systems that have the further advantage of preventing aggregation induced by the residual magnetization. Hence, beta-Glucosidase coated magnetic nanospheres could provide an attractive system suitable for the cleavage and the rapid evaluation of glycoside levels in natural products, measuring the liberated glucose without the need for specialised instrumentation. Moreover, the magnetic particles allow the subsequent collection of enzymes for further analysis, such as its use in portable fast screening kits or devices.

Using functional nano- and microparticles for the preparation of metal-organic framework composites with novel properties

A critical materials challenge over the next quarter century is the sustainable use and management of the world's natural resources, particularly the scarcest of them. Chemistry's ability to get more from less is epitomized by porous coordination polymers, also known as metal-organic frameworks (MOFs), which use a minimum amount of material to build maximum surface areas with fine control over pore size. Their large specific surface area and tunable porosity make MOFs useful for applications including small-molecule sensing, separation, catalysis, and storage and release of molecules of interest. Proof-of-concept projects have demonstrated their potential for environmental applications such as carbon separation and capture, water purification, carcinogen sequestration, byproduct separation, and resource recovery. To translate these from the laboratory into devices for actual use, however, will require synthesis of MOFs with new functionality and structure. This Account summarizes recent progress in the use of nano- and microparticles to control the function, location, and 3D structure of MOFs during MOF self-assembly, creating novel, hybrid, multifunctional, ultraporous materials as a first step towards creating MOF-based devices. The use of preformed ceramic, metallic, semiconductive, or polymeric particles allows the particle preparation process to be completely independent of the MOF synthesis, incorporating nucleating, luminescent, magnetic, catalytic, or templating particles into the MOF structure. We discuss success in combining functional nanoparticles and porous crystals for applications including molecular sieve detectors, repositionable and highly sensitive sensors, pollutant-sequestering materials, microfluidic microcarriers, drug-delivery materials, separators, and size-selective catalysts. In sections within the Account, we describe how functional particles can be used for (1) heterogeneous nucleation (seeding) of MOFs, (2) preparation of framework composites with novel properties, (3) MOF positioning on a substrate (patterning), and (4) synthesis of MOFs with novel architectures.

Exfoliated graphene into highly ordered mesoporous titania films: highly performing nanocomposites from integrated processing

To fully exploit the potential of self-assembly in a single step, we have designed an integrated process to obtain mesoporous graphene nanocomposite films. The synthesis allows incorporating graphene sheets with a small number of defects into highly ordered and transparent mesoporous titania films. The careful design of the porous matrix at the mesoscale ensures the highest diffusivity in the films. These exhibit an enhanced photocatalytic efficiency, while the high order of the mesoporosity is not affected by the insertion of the graphene sheets and is well-preserved after a controlled thermal treatment. In addition, we have proven that the nanocomposite films can be easily processed by deep X-ray lithography to produce functional arrays.

MOF positioning technology and device fabrication

Methods for permanent localisation, dynamic localisation and spatial control of functional materials within MOF crystals are critical for the development of miniaturised MOF-based devices for a number of technological applications.