Tuning graphene transistors through ad hoc electrostatics induced by a nanometer-thick molecular underlayer

We report on the modulation of the electrical properties of graphene-based transistors that mirror the properties of a few nanometers thick layer made of dipolar molecules sandwiched in between the 2D material and the SiO₂ dielectric substrate. The chemical composition of the films of quinonemonoimine zwitterion molecules adsorbed onto SiO₂ has been explored by means of X-ray photoemission and mass spectroscopy. Graphene-based devices are then fabricated by transferring the 2D material onto the molecular film, followed by the deposition of top source-drain electrodes. The degree of supramolecular order in disordered films of dipolar molecules was found to be partially improved as a result of the electric field at low temperatures, as revealed by the emergence of hysteresis in the transfer curves of the transistors. The use of molecules from the same family, which are suitably designed to interact with the dielectric surface, results in the disappearance of the hysteresis. DFT calculations confirm that the dressing of the molecules by an external electric field exhibits multiple minimal energy landscapes that explain the thermally stabilized capacitive coupling observed. This study demonstrates that the design and exploitation of ad hoc molecules as an interlayer between a dielectric substrate and graphene represents a powerful tool for tuning the electrical properties of the 2D material. Conversely, graphene can be used as an indicator of the stability of molecular layers, by providing insight into the energetics of ordering of dipolar molecules under the effect of electrical gating.

2D hybrid networks of gold nanoparticles: mechanoresponsive optical humidity sensors

Plasmonic coupling is a fascinating phenomenon occurring between neighboring metal nanostructures. We report a straightforward approach to study such process macroscopically by fabricating 2D networks of gold nanoparticles, interconnected with responsive hygroscopic organic linkers. By controlling the humidity we tune the interparticle distance to reversibly trigger plasmonic coupling collectively over several millimeters.

3D hybrid networks of gold nanoparticles: mechanoresponsive electrical humidity sensors with on-demand performances

We have engineered macroscopic 3D porous networks of gold nanoparticles (AuNPs) chemically interconnected by di-thiolated ethylene glycol oligomers. The formation of such superstructures has been followed by means of UV-Vis spectroscopy by monitoring the aggregation-dependent plasmonic band of such nanomaterials. The controlled chemical tethering of the AuNPs with di-thiolated linkers possessing a well-defined contour length rules the interparticle distance. The use of ad-hoc linkers ensures charge transport via direct tunneling and the hygroscopic nature of the ethylene glycol backbone allows interaction with moisture. Upon interaction with water molecules from the atmosphere, our 3D networks undergo swelling reducing the tunnelling current passing through the system. By exploiting such a behavior, we have devised a new approach for the fabrication of electrical resistive humidity sensors. For the first time we have also introduced a new strategy to fabricate stable and robust devices by covalently attaching our 3D networks to gold electrodes. Devices comprising both 4 (TEG) or 6 (HEG) ethylene glycol repetitive units combined with AuNPs exhibited (i) unprecedentedly high response speed (∼26 ms), (ii) short recovery time (∼250 ms) in the absence of any hysteresis effect, and (iii) a linear response to humidity changes characterized by a highest sensitivity of 51 kΩ per RH(%) for HEG- and 500 Ω per RH(%) for TEG-based devices. The employed green solution processing in water and the extreme robustness of our 3D networks make them interesting candidates for the fabrication of sensors which can operate under extreme conditions and for countless cycles.

Tuning the Optical and Electrical Properties of Few-Layer Black Phosphorus via Physisorption of Small Solvent Molecules

Black phosphorus (BP) is recently becoming more and more popular among semiconducting 2D materials for (opto)electronic applications. The controlled physisorption of molecules on the BP surface is a viable approach to modulate its optical and electronic properties. Solvents consisting of small molecules are often used for washing 2D materials or as liquid media for their chemical functionalization with larger molecules, disregarding their ability to change the opto-electronic properties of BP. Herein, it is shown that the opto-electronic properties of mechanically exfoliated few-layer BP are altered when physically interacting with common solvents. Significantly, charge transport analysis in field-effect transistors reveals that physisorbed solvent molecules induce a modulation of the charge carrier density which can be as high as 10¹² cm^-2 in BP, i.e., comparable to common dopants such as F₄ -TCNQ and MoO₃ . By combining experimental evidences with density functional theory calculations, it is confirmed that BP doping by solvent molecules not only depends on charge transfer, but is also influenced by molecular dipole. The results clearly demonstrate how an exquisite tuning of the opto-electronic properties of few-layer BP can be achieved through physisorption of small solvent molecules. Such findings are of interest both for fundamental studies and more technological applications in opto-electronics.

Boosting and Balancing Electron and Hole Mobility in Single- and Bilayer WSe2 Devices via Tailored Molecular Functionalization

WSe₂ is a layered ambipolar semiconductor enabling hole and electron transport, which renders it a suitable active component for logic circuitry. However, solid-state devices based on single- and bilayer WSe₂ typically exhibit unipolar transport and poor electrical performance when conventional SiO₂ dielectric and Au electrodes are used. Here, we show that silane-containing functional molecules form ordered monolayers on the top of the WSe₂ surface, thereby boosting its electrical performance in single- and bilayer field-effect transistors. In particular, by employing SiO₂ dielectric substrates and top Au electrodes, we measure unipolar mobility as high as μ_h = 150 cm² V^-1 s^-1 and μ_e = 17.9 cm² V^-1 s^-1 in WSe₂ single-layer devices when ad hoc molecular monolayers are chosen. Additionally, by asymmetric double-side functionalization with two different molecules, we provide opposite polarity to the top and bottom layer of bilayer WSe₂, demonstrating nearly balanced ambipolarity at the bilayer limit. Our results indicate that the controlled functionalization of the two sides of the WSe₂ mono- and bilayer flakes with highly ordered molecular monolayers offers the possibility to simultaneously achieve energy level engineering and defect functionalization, representing a path toward deterministic control over charge transport in 2D materials.

From Supramolecular Chemistry to Complex Chemical Systems

Happy Birthday! In their editorial, Paolo Samorì and Nicolas Giuseppone introduce our Virtual Collection honoring Professor Jean-Marie Lehn on the occasion of his 80th birthday. This anniversary represents just an excellent excuse to celebrate a most remarkable chemist who has always been far ahead of his time, thanks to a unique combination of scientific visions, creativity, breadth, drive, and dedication.

Modulating the Charge Transport in 2D Semiconductors via Energy-Level Phototuning

The controlled functionalization of semiconducting 2D materials (2DMs) with photoresponsive molecules enables the generation of novel hybrid structures as active components for the fabrication of high-performance multifunctional field-effect transistors (FETs) and memories. This study reports the realization of optically switchable FETs by decorating the surface of the semiconducting 2DMs such as WSe₂ and black phosphorus with suitably designed diarylethene (DAE) molecules to modulate their electron and hole transport, respectively, without sacrificing their pristine electrical performance. The efficient and reversible photochemical isomerization of the DAEs between the open and the closed isomer, featuring different energy levels, makes it possible to generate photoswitchable charge trapping levels, resulting in the tuning of charge transport through the 2DMs by alternating illumination with UV and visible light. The device reveals excellent data-retention capacity combined with multiple and well-distinguished accessible current levels, paving the way for its use as an active element in multilevel memories.

Water-Dispersed High-Quality Graphene: A Green Solution for Efficient Energy Storage Applications

Graphene has been the subject of widespread research during the past decade because of its outstanding physical properties which make it an ideal nanoscale material to investigate fundamental properties. Such characteristics promote graphene as a functional material for the emergence of disruptive technologies. However, to impact daily life products and devices, high-quality graphene needs to be produced in large quantities using an environmentally friendly protocol. In this context, the production of graphene which preserves its outstanding electronic properties using a green chemistry approach remains a key challenge. Herein, we report the efficient production of electrode material for micro-supercapacitors obtained by functionalization of water-dispersed high-quality graphene nanosheets with polydopamine. High-frequency (terahertz) conductivity measurements of the graphene nanosheets reveal high charge carrier mobility up to 1000 cm^-2 V^-1 s^-1. The fine water dispersibility enables versatile functionalization of graphene, as demonstrated by the pseudocapacitive polydopamine coating of graphene nanosheets. The polydopamine functionalization causes a modest, i.e., 20%, reduction of charge carrier mobility. Thin film electrodes based on such hybrid materials for micro-supercapacitors exhibit excellent electrochemical performance, namely a volumetric capacitance of 340 F cm^-3 and a power density of 1000 W cm^-3, thus outperforming most of the reported graphene-based micro-supercapacitors. These results highlight the potential for water-dispersed, high-quality graphene nanosheets as a platform material for energy-storage applications.

Unconventional Nanofabrication for Supramolecular Electronics

The scientific effort toward achieving a full control over the correlation between structure and function in organic and polymer electronics has prompted the use of supramolecular interactions to drive the formation of highly ordered functional assemblies, which have been integrated into real devices. In the resulting field of supramolecular electronics, self-assembly of organic semiconducting materials constitutes a powerful tool to generate low-dimensional and crystalline functional architectures. These include 1D nanostructures (nanoribbons, nanotubes, and nanowires) and 2D molecular crystals with tuneable and unique optical, electronic, and mechanical properties. Optimizing the (opto)electronic properties of organic semiconducting materials is imperative to harness such supramolecular structures as active components for supramolecular electronics. However, their integration in real devices currently represents a significant challenge to the advancement of (opto)electronics. Here, an overview of the unconventional nanofabrication techniques and device configurations to enable supramolecular electronics to become a real technology is provided. A particular focus is put on how single and multiple supramolecular fibers and gels as well as supramolecularly engineered 2D materials can be integrated into novel vertical or horizontal junctions to realize flexible and high-density multifunctional transistors, photodetectors, and memristors, exhibiting a set of new properties and excelling in their performances.

High-Performance Graphene-Based Cementitious Composites

This study reports on the development of a cementitious composite incorporating electrochemically exfoliated graphene (EEG). This hybrid functional material features significantly enhanced microstructure and mechanical properties, as well as unaffected workability; thus, it outperforms previously reported cementitious composites containing graphene derivatives. The manufacturing of the composite relies on a simple and efficient method that enables the uniform dispersion of EEG within cement matrix in the absence of surfactants. Different from graphene oxide, EEG is found to not agglomerate in cement alkaline environment, thereby not affecting the fluidity of cementitious composites. The addition of 0.05 wt% graphene content to ordinary Portland cement results in an increase up to 79%, 8%, and 9% for the tensile strength, compressive strength, and Young's modulus, respectively. Remarkably, it is found that the addition of EEG promotes the hydration reaction of both alite and belite, thus leading to the formation of a large fraction of 3CaO·2SiO2·3H2O (C-S-H) phase. These findings represent a major step forward toward the practical application of nanomaterials in civil engineering.

A Universal Approach toward Light-Responsive Two-Dimensional Electronics: Chemically Tailored Hybrid van der Waals Heterostructures

Stimuli-responsive hybrid van der Waals heterostructures (vdWHs), composed of organic molecular switches superimposed on inorganic 2D materials (2DMs), can combine the outstanding physical properties of the latter components with the virtually infinite variety of tunable functionality of molecules, thereby offering an efficient protocol for the development of high-performance multifunctional materials and devices. The use of light as a remote control to modulate the properties of semiconducting 2DMs when interfaced with photochromic molecules suffers from both the limitation associated with the persistent photoconductivity characterizing the 2DMs and the finite thermal stability of the photochromic molecule in its different states. Here, we have devised a universal approach toward the fabrication of optically switchable electronic devices comprising a few nanometers thick azobenzene (AZO) layer physisorbed on 2D semiconductors supported on a trap-free polymer dielectric. The joint effect of the improved 2D/dielectric interface, the molecule's light-modulated dipolar doping, and the high thermal stability of cis-AZO offers the highest control over the reversible and efficient charge carrier tuning in 2D semiconductors with a preserved high performance in 2D field-effect transistors, as quantified in terms of carrier mobility and I_on/ I_off ratio. The device has the potential to operate as an optical memory with four current levels and long retention time (>15 h). Furthermore, by using a CMOS-compatible micropatterning process, the photoswitchable resistor-diode transition has been achieved on hybrid lateral heterojunction devices. Our approach is of general applicability toward the generation of high-performance hybrid vdWHs for the emergence of functional and responsive devices.

Optically switchable organic light-emitting transistors

Organic light-emitting transistors are pivotal components for emerging opto- and nanoelectronics applications, such as logic circuitries and smart displays. Within this technology sector, the integration of multiple functionalities in a single electronic device remains the key challenge. Here we show optically switchable organic light-emitting transistors fabricated through a judicious combination of light-emitting semiconductors and photochromic molecules. Irradiation of the solution-processed films at selected wavelengths enables the efficient and reversible tuning of charge transport and electroluminescence simultaneously, with a high degree of modulation (on/off ratios up to 500) in the three primary colours. Different emitting patterns can be written and erased through a non-invasive and mask-free process, on a length scale of a few micrometres in a single device, thereby rendering this technology potentially promising for optically gated highly integrated full-colour displays and active optical memory.

Nonvolatile Memories Based on Graphene and Related 2D Materials

The pervasiveness of information technologies is generating an impressive amount of data, which need to be accessed very quickly. Nonvolatile memories (NVMs) are making inroads into high-capacity storage to replace hard disk drives, fuelling the expansion of the global storage memory market. As silicon-based flash memories are approaching their fundamental limit, vertical stacking of multiple memory cell layers, innovative device concepts, and novel materials are being investigated. In this context, emerging 2D materials, such as graphene, transition metal dichalcogenides, and black phosphorous, offer a host of physical and chemical properties, which could both improve existing memory technologies and enable the next generation of low-cost, flexible, and wearable storage devices. Herein, an overview of graphene and related 2D materials (GRMs) in different types of NVM cells is provided, including resistive random-access, flash, magnetic and phase-change memories. The physical and chemical mechanisms underlying the switching of GRM-based memory devices studied in the last decade are discussed. Although at this stage most of the proof-of-concept devices investigated do not compete with state-of-the-art devices, a number of promising technological advancements have emerged. Here, the most relevant material properties and device structures are analyzed, emphasizing opportunities and challenges toward the realization of practical NVM devices.

Nano-Subsidence-Assisted Precise Integration of Patterned Two-Dimensional Materials for High-Performance Photodetector Arrays

The spatially precise integration of arrays of micropatterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO₂ substrates represents an attractive, low-cost system-on-chip strategy toward the realization of extended functions in silicon microelectronics. However, the reliable integration of such atomically thin arrays on planar patterned surfaces has proven challenging due to their poor adhesion to underlying substrates, as ruled by weak van der Waals interactions. Here, we report on an integration method utilizing the flexibility of the atomically thin crystals and their physical subsidence in liquids, which enables the reliable fabrication of the micropatterned 2D materials/Si arrays. Our photodiode devices display peak sensitivity as high as 0.35 A/W and external quantum efficiency (EQE) of ∼90%. The nano-subsidence technique represents a viable path to on-chip integration of 2D crystals onto silicon for advanced microelectronics.

Doping of Monolayer Transition-Metal Dichalcogenides via Physisorption of Aromatic Solvent Molecules

Two-dimensional (2D) transition-metal dichalcogenides (TMDs) recently emerged as novel materials displaying a wide variety of physicochemical properties that render them unique scaffolds for high-performance (opto)electronics. The controlled physisorption of molecules on the TMD surface is a viable approach for tuning their optical and electronic properties. Solvents, made of small aromatic molecules, are frequently employed for the cleaning of the 2D materials or as a "dispersant" for their chemical functionalization with larger (macro)molecules, without considering their potential key effect in locally modifying the characteristics of 2D materials. In this work, we demonstrate how the electronic and optical properties of a mechanically exfoliated monolayer of MoS₂ and WSe₂ are modified when physically interacting with small aromatic molecules of common solvents. Low-temperature photoluminescence (PL) spectra recorded at 78 K revealed that physisorbed benzene derivatives could modulate the charge carrier density in monolayer TMDs, hence affecting the switching between a neutral exciton and trion (charged exciton). By combining experimental evidence with density functional theory calculations, we confirm that charge-transfer doping on TMDs depends not only on the difference in chemical potential between molecules and 2D materials but also on the thermodynamic stability of physisorption. Our results provide unambiguous evidences of the great potential of optical and electrical tuning of monolayer MoS₂ and WSe₂ by physisorption of small aromatic solvent molecules, which is highly relevant for both fundamental studies and device application purposes.

Molecule-Graphene Hybrid Materials with Tunable Mechanoresponse: Highly Sensitive Pressure Sensors for Health Monitoring

The development of pressure sensors is crucial for the implementation of electronic skins and for health monitoring integrated into novel wearable devices. Tremendous effort is devoted toward improving their sensitivity, e.g., by employing microstructured electrodes or active materials through cumbersome processes. Here, a radically new type of piezoresistive pressure sensor based on a millefeuille-like architecture of reduced graphene oxide (rGO) intercalated by covalently tethered molecular pillars holding on-demand mechanical properties are fabricated. By applying a tiny pressure to the multilayer structure, the electron tunnelling ruling the charge transport between successive rGO sheets yields a colossal decrease in the material's electrical resistance. Significantly, the intrinsic rigidity of the molecular pillars employed enables the fine-tuning of the sensor's sensitivity, reaching sensitivities as high as 0.82 kPa^-1 in the low pressure region (0-0.6 kPa), with short response times (≈24 ms) and detection limit (7 Pa). The pressure sensors enable efficient heartbeat monitoring and can be easily transformed into a matrix capable of providing a 3D map of the pressure exerted by different objects.

Persian waxing of graphite: towards green large-scale production of graphene

Large quantities of high-quality graphene has been produced through a green and up-scalable method based on the exfoliation and dispersion of graphene in a sugar-based wax, by mimicking the Scotch tape approach to enable the production of graphene paste with unprecedently high concentration of 30% in weight exhibiting ultrahigh stability.

Tailoring the physicochemical properties of solution-processed transition metal dichalcogenides via molecular approaches

In this Feature Article we highlight the tremendous progress in solution-processed transition metal dichalcogenides and the molecular approaches employed to finely tune their physicochemical properties.

Covalently linked donor–acceptor dyad for efficient single material organic solar cells

A novel covalently linked donor–acceptor dyad comprising a dithienopyrrol-based oligomeric donor and a fullerene acceptor was synthesized and characterized.

Thermal insulation with 2D materials: liquid phase exfoliated vermiculite functional nanosheets

Phyllosilicates are layered materials possessing unique thermal properties, commonly exploited in their multilayered crystalline form as refractory insulators and heating elements. A more versatile use of such materials, however, would require their existence in the form of inks and dispersions ready to be patterned. Within this framework, the liquid-phase exfoliation of low-cost, low-purity materials such as bulk multiphasic minerals and powders represents an economically advantageous approach for the production of 2D nano-sized objects with a defined composition, size and morphology. Here, ultrasound-assisted exfoliation and shear-mixing of a multi-phasic vermiculite in mild acidic aqueous solutions were employed to successfully obtain dispersions of mono- and few-layer thick clay nanosheets. The exfoliated materials were thoroughly investigated through granulometry, X-Ray Diffraction (XRD), specific surface area measurements and AFM imaging. Despite the fact that the lateral size and the thickness distribution of exfoliated flakes obtained with the two approaches appear similar, the ultrasound-assisted exfoliation process yielded a larger amount of mono- and bi-layer thick flakes as well as materials with a higher specific surface area. XRD analysis revealed that the use of ultrasound waves in an acidic environment results in the complete exfoliation of the vermiculite layer, whereas the use of shear forces under the same conditions results in the exfoliation of hydrobiotite and mica crystalline phases. Thermal conductivity measurements provided clear evidence on how the structural changes - arising from the exfoliation process - have a direct impact on the properties of the exfoliated clay. Remarkably, compared to the raw material, the thermal conductivity of the exfoliated material decreases by 25%, reaching the ultra-low thermal conductivity regime (<0.1 W m^-1 K^-1). Our approach may enable in the future the generation of patterns of thermal insulators onto different surfaces by applying vermiculite nanosheets in the form of dispersions and printable inks.

Current crowding issues on nanoscale planar organic transistors for spintronic applications

The predominance of interface resistance makes current crowding ubiquitous in short channel organic electronics devices but its impact on spin transport has never been considered. We investigate electrochemically doped nanoscale PBTTT short channel devices and observe the smallest reported values of crowding lengths, found for sub-100 nm electrodes separation. These observed values are nevertheless exceeding the spin diffusion lengths reported in the literature. We discuss here how current crowding can be taken into account in the framework of the Fert-Jaffrès model of spin current propagation in heterostructures, and predict that the anticipated resulting values of magnetoresistance can be significantly reduced. Current crowding therefore impacts spin transport applications and interpretation of the results on spin valve devices.

Molecular chemistry approaches for tuning the properties of two-dimensional transition metal dichalcogenides

Two-dimensional (2D) semiconductors, such as ultrathin layers of transition metal dichalcogenides (TMDs), offer a unique combination of electronic, optical and mechanical properties, and hold potential to enable a host of new device applications spanning from flexible/wearable (opto)electronics to energy-harvesting and sensing technologies. A critical requirement for developing practical and reliable electronic devices based on semiconducting TMDs consists in achieving a full control over their charge-carrier polarity and doping. Inconveniently, such a challenging task cannot be accomplished by means of well-established doping techniques (e.g. ion implantation and diffusion), which unavoidably damage the 2D crystals resulting in degraded device performances. Nowadays, a number of alternatives are being investigated, including various (supra)molecular chemistry approaches relying on the combination of 2D semiconductors with electroactive donor/acceptor molecules. As yet, a large variety of molecular systems have been utilized for functionalizing 2D TMDs via both covalent and non-covalent interactions. Such research endeavours enabled not only the tuning of the charge-carrier doping but also the engineering of the optical, electronic, magnetic, thermal and sensing properties of semiconducting TMDs for specific device applications. Here, we will review the most enlightening recent advancements in experimental (supra)molecular chemistry methods for tailoring the properties of atomically-thin TMDs - in the form of substrate-supported or solution-dispersed nanosheets - and we will discuss the opportunities and the challenges towards the realization of novel hybrid materials and devices based on 2D semiconductors and molecular systems.

Concentration-dependent supramolecular patterns of C3 and C2 symmetric molecules at the solid/liquid interface

Here we report on a scanning tunnelling microscopy (STM) investigation on the self-assembly of C₃- and C₂-symmetric molecules at the solution/graphite interface. 1,3,5-tris((E)-2-(pyridin-4-yl)vinyl)benzene and 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane are used as model systems. These molecules displayed a concentration dependent self-assembly behaviour on graphite, resulting in highly ordered supramolecular structures, which are stabilized jointly by van der Waals substrate-adsorbate interactions and in-plane intermolecular H-bonding. Denser packing is obtained when applying a relatively high concentration solution to the basal plane of the surface whereas a less dense porous network is observed upon lowering the concentration. We show that the molecular conformation does not influence the stability of the self-assembly and a twisted molecule can pack into dense and porous architectures under the concentration effect.

Self-Assembled Two-Dimensional Supramolecular Networks Characterized by Scanning Tunneling Microscopy and Spectroscopy in Air and under Vacuum

We combine ambient (air) and ultrahigh vacuum (UHV) scanning tunneling microscopy (STM) and spectroscopy (STS) investigations together with density functional theory (DFT) calculations to gain a subnanometer insight into the structure and dynamic of two-dimensional (2D) surface-supported molecular networks. The planar tetraferrocene-porphyrin molecules employed in this study undergo spontaneous self-assembly via the formation of hydrogen bonded networks at the gold substrate-solution interface. To mimic liquid phase ambient deposition conditions, film formation was accomplished in UHV by electro-spraying a solution of the molecule in chloroform onto an Au(111) substrate, thereby providing access to the full spectroscopic capabilities of STM that can be hardly attained under ambient conditions. We show that molecular assembly on Au (111) is identical in films prepared under the two different conditions, and in good agreement with the theoretical predictions. However, we observe the contrast found for a given STM bias condition to be different in ambient and UHV conditions despite the similarity of the structures, and we propose possible origins of the different imaging contrast. This approach could be valuable for the thorough characterization of surface systems that involve large molecules and are prepared mainly in ambient conditions.

Self-Suspended Nanomesh Scaffold for Ultrafast Flexible Photodetectors Based on Organic Semiconducting Crystals

Self-standing nanostructures are of fundamental interest in materials science and nanoscience and are widely used in (opto-)electronic and photonic devices as well as in micro-electromechanical systems. To date, large-area and self-standing nanoelectrode arrays assembled on flexible substrates have not been reported. Here the fabrication of a hollow nanomesh scaffold on glass and plastic substrates with a large surface area over 1 mm² and ultralow leakage current density (≈1-10 pA mm^-2 @ 2 V) across the empty scaffold is demonstrated. Thanks to the continuous sub-micrometer space formed in between the nanomesh and the bottom electrode, highly crystalline and dendritic domains of 6,13-bis(triisopropylsilylethinyl)pentacene growing within the hollow cavity can be observed. The high degree of order at the supramolecular level leads to efficient charge and exciton transport; the photovoltaic detector supported on flexible polyethylene terephthalate substrates exhibits an ultrafast photoresponse time as short as 8 ns and a signal-to-noise ratio approaching 10⁵ . Such a hollow scaffold holds great potential as a novel device architecture toward flexible (opto-)electronic applications based on self-assembled micro/nanocrystals.

Direct Photolithography on Molecular Crystals for High Performance Organic Optoelectronic Devices

Organic crystals are generated via the bottom-up self-assembly of molecular building blocks which are held together through weak noncovalent interactions. Although they revealed extraordinary charge transport characteristics, their labile nature represents a major drawback toward their integration in optoelectronic devices when the use of sophisticated patterning techniques is required. Here we have devised a radically new method to enable the use of photolithography directly on molecular crystals, with a spatial resolution below 300 nm, thereby allowing the precise wiring up of multiple crystals on demand. Two archetypal organic crystals, i.e., p-type 2,7-diphenyl[1]benzothieno[3,2- b][1]benzothiophene (Dph-BTBT) nanoflakes and n-type N, N'-dioctyl-3,4,9,10-perylenedicarboximide (PTCDI-C8) nanowires, have been exploited as active materials to realize high-performance top-contact organic field-effect transistors (OFETs), inverter and p-n heterojunction photovoltaic devices supported on plastic substrate. The compatibility of our direct photolithography technique with organic molecular crystals is key for exploiting the full potential of organic electronics for sophisticated large-area devices and logic circuitries, thus paving the way toward novel applications in plastic (opto)electronics.

Phenoxyaluminum(salophen) Scaffolds: Synthesis, Electrochemical Properties, and Self-Assembly at Surfaces of Multifunctional Systems

Salophens and Salens are Schiff bases generated through the condensation of two equivalents of salicylaldehyde with either 1,2-phenylenediamines or aliphatic diamines, respectively. Both ligands have been extensively exploited as key building blocks in coordination chemistry and catalysis. In particular, their metal complexes have been widely used for various catalytical transformations with high yield and selectivity. Through the modification of the phenol unit it is possible to tune the steric hindrance and electronic properties of Salophen and Salen. The introduction of long aliphatic chains in salicylaldehydes can be used to promote their self-assembly into ordered supramolecular structures on solid surfaces. Herein, we report a novel method towards the facile synthesis of robust and air-stable [Al(Salophen)] derivatives capable of undergoing spontaneous self-assembly at the graphite/solution interface forming highly-ordered nanopatterns. The new synthetic approach relies on the use of [MeAl^III (Salophen)] as a building unit to introduce, via a simple acid/base reaction with functionalized acidic phenol derivatives, selected frameworks integrating multiple functions for efficient surface decoration. STM imaging at the solid/liquid interface made it possible to monitor the formation of ordered supramolecular structures. In addition, the redox properties of the Salophen derivatives functionalized with ferrocene units in solution and on surface were unraveled by cyclic voltammetry. The use of a five-coordinate aluminum alkyl Salophen precursor enables the tailoring of new Salophen molecules capable of undergoing controlled self-assembly on HOPG, and thereby it can be exploited to introduce multiple functionalities with subnanometer precision at surfaces, ultimately forming ordered functional patterns.

When 2D Materials Meet Molecules: Opportunities and Challenges of Hybrid Organic/Inorganic van der Waals Heterostructures

van der Waals heterostructures, composed of vertically stacked inorganic 2D materials, represent an ideal platform to demonstrate novel device architectures and to fabricate on-demand materials. The incorporation of organic molecules within these systems holds an immense potential, since, while nature offers a finite number of 2D materials, an almost unlimited variety of molecules can be designed and synthesized with predictable functionalities. The possibilities offered by systems in which continuous molecular layers are interfaced with inorganic 2D materials to form hybrid organic/inorganic van der Waals heterostructures are emphasized. Similar to their inorganic counterpart, the hybrid structures have been exploited to put forward novel device architectures, such as antiambipolar transistors and barristors. Moreover, specific molecular groups can be employed to modify intrinsic properties and confer new capabilities to 2D materials. In particular, it is highlighted how molecular self-assembly at the surface of 2D materials can be mastered to achieve precise control over position and density of (molecular) functional groups, paving the way for a new class of hybrid functional materials whose final properties can be selected by careful molecular design.

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.

Nanomaterials properties tuned by their environment: integrating supramolecular concepts into sensing devices

Guest editors Paolo Samorì and Fabio Biscarini introduce the Nanomaterials properties tuned by their environment themed issue of Chemical Society Reviews.

Punctured Two-Dimensional Sheets for Harvesting Blue Energy

The challenges of global climate change and the world's growing demand for energy have brought the need for new renewable energy sources to the top of the international community's agenda. We have known for many centuries that energy is released upon mixing seawater and freshwater, yet it was just a few decades ago that it became clear how this energy can be converted into electricity instead of heat. As a result, the blue energy rush has raised and set new strategies in different science and technology sectors, leading to the construction of a new generation of plants and other technological investments. Among many approaches, pressure-retarded osmosis has emerged as a promising method to collect the largest amount of produced blue energy. In this Perspective, we highlight the advances in the development of ultrathin membranes based on two-dimensional materials. We discuss the most relevant synthetic methods devised to generate atomically thin membranes for pressure-retarded osmosis and retarded electrodialysis applications, and we provide some critical views on the greatest challenges in this thrilling research area.

Hybrid Copper-Nanowire-Reduced-Graphene-Oxide Coatings: A "Green Solution" Toward Highly Transparent, Highly Conductive, and Flexible Electrodes for (Opto)Electronics

This study reports a novel green chemistry approach to assemble copper-nanowires/reduced-graphene-oxide hybrid coatings onto inorganic and organic supports. Such films are robust and combine sheet resistances (<30 Ω sq^-1 ) and transparencies in the visible region (transmittance > 70%) that are rivalling those of indium-tin oxide. These electrodes are suitable for flexible electronic applications as they show a sheet resistance change of <4% after 10 000 bending cycles at a bending radius of 1.0 cm, when supported on polyethylene terephthalate foils. Significantly, the wet-chemistry method involves the preparation of dispersions in environmentally friendly solvents and avoids the use of harmful reagents. Such inks are processed at room temperature on a wide variety of surfaces by spray coating. As a proof-of-concept, this study demonstrates the successful use of such coatings as electrodes in high-performance electrochromic devices. The robustness of the electrodes is demonstrated by performing several tens of thousands of cycles of device operation. These unique conducting coatings hold potential for being exploited as transparent electrodes in numerous optoelectronic applications such as solar cells, light-emitting diodes, and displays.

Reversible, Fast, and Wide-Range Oxygen Sensor Based on Nanostructured Organometal Halide Perovskite

Nanostructured materials characterized by high surface-volume ratio hold the promise to constitute the active materials for next-generation sensors. Solution-processed hybrid organohalide perovskites, which have been extensively used in the last few years for optoelectronic applications, are characterized by a self-assembled nanostructured morphology, which makes them an ideal candidate for gas sensing. Hitherto, detailed studies of the dependence of their electrical characteristics on the environmental atmosphere have not been performed, and even the effect of a ubiquitous gas such as O₂ has been widely overlooked. Here, the electrical response of organohalide perovskites to oxygen is studied. Surprisingly, a colossal increase (3000-fold) in the resistance of perovskite-based lateral devices is found when measured in a full oxygen atmosphere, which is ascribed to a trap healing mechanism originating from an O₂ -mediated iodine vacancies filling. A variation as small as 70 ppm in the oxygen concentration can be detected. The effect is fast (<400 ms) and fully reversible, making organohalide perovskites ideal active materials for oxygen sensing. The effect of oxygen on the electrical characteristics of organohalide perovskites must be taken into deep consideration for the design and optimization of any other perovskite-based (opto-) electronic device working in ambient conditions.

Light-Induced Contraction/Expansion of 1D Photoswitchable Metallopolymer Monitored at the Solid-Liquid Interface

The use of a bottom-up approach to the fabrication of nanopatterned functional surfaces, which are capable to respond to external stimuli, is of great current interest. Herein, the preparation of light-responsive, linear supramolecular metallopolymers constituted by the ideally infinite repetition of a ditopic ligand bearing an azoaryl moiety and Co(II) coordination nodes is described. The supramolecular polymerization process is followed by optical spectroscopy in dimethylformamide solution. Noteworthy, a submolecularly resolved scanning tunneling microscopy (STM) study of the in situ reversible trans-to-cis photoisomerization of a photoswitchable metallopolymer that self-assembles into 2D crystalline patterns onto a highly oriented pyrolytic graphite surface is achieved for the first time. The STM analysis of the nanopatterned surfaces is corroborated by modeling the physisorbed species onto a graphene slab before and after irradiation by means of density functional theory calculation. Significantly, switching of the monolayers consisting of supramolecular Co(II) metallopolymer bearing trans-azoaryl units to a novel pattern based on cis isomers can be triggered by UV light and reversed back to the trans conformer by using visible light, thereby restoring the trans-based supramolecular 2D packing. These findings represent a step forward toward the design and preparation of photoresponsive "smart" surfaces organized with an atomic precision.

Asymmetric Injection in Organic Transistors via Direct SAM Functionalization of Source and Drain Electrodes

The fabrication of organic optoelectronic devices integrating asymmetric electrodes enables optimal charge injection/extraction at each individual metal/semiconductor interface. This is key for applications in devices such as solar cells, light-emitting transistors, photodetectors, inverters, and sensors. Here, we describe a new method for the asymmetric functionalization of gold electrodes with different thiolated molecules as a viable route to obtain two electrodes with drastically different work function values. The process involves an ad hoc design of electrode geometry and the use of a polymeric mask to protect one electrode during the first functionalization step. Photoelectron yield ambient spectroscopy and X-ray photoelectron spectrometry were used to characterize the energetic properties and the composition of the asymmetrically functionalized electrodes. Finally, we used poly(3-hexylthiophene)-based organic thin-film transistors to show that the asymmetric electronic response stems from the different electronic structures of the functionalized electrodes.

Morphology and Electronic Properties of Electrochemically Exfoliated Graphene

Electrochemically exfoliated graphene (EEG) possesses optical and electronic properties that are markedly different from those of the more explored graphene oxide in both its pristine and reduced forms. EEG also holds a unique advantage compared to other graphenes produced by exfoliation in liquid media: it can be obtained in large quantities in a short time. However, an in-depth understanding of the structure-properties relationship of this material is still lacking. In this work, we report physicochemical characterization of EEG combined with an investigation of the electronic properties of this material carried out both at the single flake level and on the films. Additionally, we use for the first time microwave irradiation to reduce the EEG and demonstrate that the oxygen functionalities are not the bottleneck for charge transport in EEG, which is rather hindered by the presence of structural defects within the basal plane.

Engineering Chemically Active Defects in Monolayer MoS2 Transistors via Ion-Beam Irradiation and Their Healing via Vapor Deposition of Alkanethiols

Irradiation of 2D sheets of transition metal dichalcogenides with ion beams has emerged as an effective approach to engineer chemically active defects in 2D materials. In this context, argon-ion bombardment has been utilized to introduce sulfur vacancies in monolayer molybdenum disulfide (MoS₂ ). However, a detailed understanding of the effects of generated defects on the functional properties of 2D MoS₂ is still lacking. In this work, the correlation between critical electronic device parameters and the density of sulfur vacancies is systematically investigated through the fabrication and characterization of back-gated monolayer MoS₂ field-effect transistors (FETs) exposed to a variable fluence of low-energy argon ions. The electrical properties of pristine and ion-irradiated FETs can be largely improved/recovered by exposing the devices to vapors of short linear thiolated molecules. Such a solvent-free chemical treatment-carried out strictly under inert atmosphere-rules out secondary healing effects induced by oxygen or oxygen-containing molecules. The results provide a guideline to design monolayer MoS₂ optoelectronic devices with a controlled density of sulfur vacancies, which can be further exploited to introduce ad hoc molecular functionalities by means of thiol chemistry approaches.

Generation of Low-Dimensional Architectures through the Self-Assembly of Pyromellitic Diimide Derivatives

Small π-conjugated molecules can be designed and synthesized to undergo controlled self-assembly forming low-dimensional architectures, with programmed order at the supramolecular level. Such order is of paramount importance because it defines the property of the obtained material. Here, we have focused our attention to four pyromellitic diimide derivatives exposing different types of side chains. The joint effect of different noncovalent interactions including π-π stacking, H-bonding, and van der Waals forces on the four derivatives yielded different self-assembled architectures. Atomic force microscopy studies, corroborated with infrared and nuclear magnetic resonance spectroscopic measurements, provided complementary multiscale insight into these assemblies.