Analysis of petrol and diesel vapour and vehicle engine exhaust gases using selected ion flow tube mass spectrometry

We have used selected ion flow tube mass spectrometry (SIFT-MS) to analyse the vapours emitted by petrol and diesel fuels and the exhaust gases from petrol (spark ignition) and diesel (compression ignition) engine vehicles fitted with catalytic converters. Only those components of these media that have significant vapour pressures at ambient temperatures were analysed and thus particulates were obviously not detected. These media have been analysed using the full scope of SIFT-MS, i.e., with the three available precursor ions H3O+, NO+ and O2+. The combination of the H3O+ and NO+ analyses is seen to be essential to distinguish between different product ions at the same mass-to-charge ratio (m/z) especially in identifying aldehydes in the exhaust gases. The O2+ precursor ions are used to detect and quantify the large amount of nitric oxide present in the exhaust gases from both engine types. The petrol and diesel vapours consist almost exclusively of aliphatic alkanes, alkenes and alkynes (and dienes) and aromatic hydrocarbons. Some of these compounds appear in the exhaust gases together with several aldehydes, viz. formaldehyde, acetaldehyde, pentanal, pentenal (acrolein), butenal, and also methanol and ethanol. Acetone, nitric oxide and ammonia are also present, acetone and nitric oxide being much more abundant in the diesel exhaust gas than in the petrol exhaust gas. These data were obtained from samples collected into pre-evacuated stainless steel vessels. Trapping of the volatile compounds from the gas samples is not required and analysis was completed a few minutes later. All the above compounds are detected simultaneously, which demonstrates the value of SIFT-MS in this area of research.

Kinetics and isotope patterns of ethanol and acetaldehyde emissions from yeast fermentations of glucose and glucose-6,6-d2 using selected ion flow tube mass spectrometry: a case study

As a prelude to investigations of the emission of metabolites from human cell lines in vitro, we have conducted a study using selected ion flow tube mass spectrometry (SIFT-MS) of the acetaldehyde and ethanol that appear in the headspace above a fermenting yeast/glucose/water mixture in sealed glass bottles at a temperature of 30 degrees C. A fixed quantity of yeast (10 mg) and varying amounts (2, 4, 8 and 16 mg) of both non-deuterated glucose and glucose-6,6-d2 in 5 mL of water were used and the emission of the acetaldehyde and the ethanol were observed as a function of time. The ethanol and acetaldehyde concentrations in the headspace were obtained from the magnitudes of their characteristic ions on the accumulated SIFT mass spectra and, when the deuterated glucose was used, characteristic singly and doubly deuterated ions were obvious. This study indicates, as expected, that ethanol is the major species generated and that acetaldehyde is a relatively minor component of the headspace and a very minor component of the liquid phase. We estimate that about 10(8) ethanol molecules are produced per minute per cell in this yeast fermentation process. The distribution of the non-deuterated and partially deuterated ethanol under these fermentation conditions is observed to be C2H5OH (66 +/- 4)%, C2H4DOH(6 +/- 1)%, C2H3D2OH(28 +/- 4)%, and the analogous distribution for the acetaldehyde is the same, within error. These results indicate that the D atoms in the glucose-6,6-d2 are mostly retained by the 6-C atom, but the appearance of the singly deuterated ethanol and acetaldehyde indicates that some D/H mixing must be occurring in the enzymatic reactions. The results of this study illustrate the potential and power of on-line SIFT-MS analysis in this area of research.

Rapid measurement of deuterium content of breath following oral ingestion to determine body water

The ability to measure total body water accurately, non-invasively and rapidly with results that are immediately available would represent an important advance in body composition research. Flowing afterglow mass spectrometry (FA-MS) has been developed to enable immediate measurement of deuterium content in breath water from single exhalations, which when combined with oral D2O loading enables measurement of total body water. We report here its first use in normal subjects, demonstrating the dispersal kinetics of deuterium in the body by monitoring deuterium in breath water following ingestion. Ten studies were performed in six normal subjects. After obtaining baseline samples, each subject ingested 0.3 g x kg(-1) of 99.9% pure D2O. Subsequently, breath samples were obtained every 3-5 minutes until equilibration had occurred. Three distinct phases in breath deuterium content were observed: an initial immediate peak due to HDO remaining in the oral cavity, a secondary peak reflecting gastrointestinal absorption and finally equilibration with the body water. The incremental increase in breath deuterium abundance between baseline and equilibration was used to calculate the total body water. Mathematical fitting of this final equilibration phase demonstrated that the measured deuterium abundance was within 0.2% of the ideal (asymptotic) value within 2 hours in all cases. We conclude that FA-MS is a powerful new method that, when combined with oral D2O loading, enables measurement of the dispersal kinetics of HDO and the calculation of total body water within 2 hours.

Quantitative selected ion flow tube mass spectrometry: the influence of ionic diffusion and mass discrimination

Selected ion flow tube mass spectrometry, (SIFT-MS), involves the partial conversion of mass-selected precursor ions to product ions in their reactions with the trace gases in an air sample that is introduced into helium carrier gas in a flow tube. The precursor and product ions are then detected and counted by a downstream quadrupole mass spectrometer. Quantification of particular trace gases is thus achieved from the ratio of the total count rate of the product ions to that for the precursor ions. However, it is important to appreciate that in this ion chemistry the light precursor ions (usually H3O+ ions) are invariably converted to heavier product ions. Hence, the product ions diffuse to the flow tube walls more slowly and thus they are more efficiently transported to the downstream mass spectrometer sampling orifice. This phenomenon we refer to as diffusion enhancement. Further, it is a well-known fact that discrimination can occur against ions of large mass-to-charge ratio, (m/z), in quadrupole mass spectrometers. If not accounted for, diffusion enhancement usually results in erroneously high trace gas concentrations and mass discrimination results in erroneously low concentrations. In this experimental investigation, we show how both these counteracting effects can be accounted for to increase the accuracy of SIFT-MS quantification. This is achieved by relating the currents of ions of various m/z that arrive at the downstream mass spectrometer sampling orifice disc to their count rates at the ion detector after mass analysis. Thus, both diffusion enhancement and mass discrimination are parameterized as a function of m/z and these are combined to provide an overall discrimination factor for the particular analytical instrument.

A new 'online' method to measure increased exhaled isoprene in end-stage renal failure

BACKGROUND

Isoprene is the most abundant hydrocarbon present in breath, and recent reports indicate that breath concentrations increase following haemodialysis. The purpose of this study was to establish whether selected ion flow tube mass spectrometry (SIFT-MS), a newly established technique in breath analysis, may be used to quantify breath isoprene in haemodialysis patients in the clinical setting. SIFT-MS is compared and contrasted with the established gas chromatography mass spectrometric technique for this purpose.

METHODS

Three consecutive exhalations from 19 haemodialysis patients (12 males, seven females) undergoing a morning dialysis shift were analysed just prior to commencing treatment. Within 5 min of completing their usual dialysis regimen, using polysulphone membranes, the breath of each patient was analysed again. Additional contemporary samples were obtained from 17 normal controls. Breath isoprene was quantified using SIFT-MS, a method previously validated quantitatively using neat isoprene.

RESULTS

Successful measurements of breath isoprene were obtained for each subject within 2 min, with minimum disruption to a busy dialysis environment. The coefficient of variation of triplicate measurements of breath isoprene was <10%. Prior to dialysis, the mean (+/-SD) breath isoprene concentration (138+/-63 parts per billion (ppb)) was significantly greater than for normal controls (89+/-36 ppb; P=0.016). Immediately following treatment, breath isoprene increased significantly to 184+/-95 ppb (P=0.023).

CONCLUSIONS

SIFT-MS permits the accurate and rapid measurement of breath isoprene in haemodialysis patients in the clinical setting. The previously reported increase in breath isoprene following dialysis treatment is confirmed. SIFT-MS is the ideal analytical tool to investigate this phenomenon further.

Accuracy and precision of flowing afterglow mass spectrometry for the determination of the deuterium abundance in the headspace of aqueous liquids and exhaled breath water

We have assessed the accuracy and precision of our flowing afterglow mass spectrometric method (FA-MS) for absolute measurements of deuterium abundance in water using standardised tap water/D(2)O mixtures within the D/H range from 155 ppm (local tap water) to 1104 ppm, prepared by the gravimetric method. The results of this study show that a precision and accuracy of 1% can be achieved for the deuterium abundance in water samples. This is quite adequate for the main application, which is the rapid, non-invasive measurement of total body water by deuterium analysis of breath water vapour using the D(2)O dilution method.

On-line determination of the deuterium abundance in breath water vapour by flowing afterglow mass spectrometry with applications to measurements of total body water

We have developed a new method for the on-line quantification of deuterium in water vapour. We call this method flowing afterglow mass spectrometry (FA-MS). A swarm of H3O+ precursor ions is created in flowing helium carrier gas by a microwave discharge. These precursor ions react with the H2O, HDO, H2(17)O and H2(18)O molecules in a water vapour sample that is introduced into the carrier gas/H3O+ ion swarm. The hydrated ions, H3O+.(H2O)3 at m/z 73, and their isotopic variant ions H8DO4(+) and H9(17)OO(3)(+) at m/z 74 and H9(18)OO(3)(+) at m/z 75, are thus formed. By adopting the known fractional abundance of 18O in water vapour, and accounting for the contribution of the isotopic ions H9(17)OO(3)(+) to the ion signal at m/z 74, a measurement of the 74/75 ion signal ratio under equilibrium conditions provides the fractional deuterium abundance in the water vapour sample. Using this technique, the deuterium abundance in the water vapour present in single exhalations of breath can be determined. Thus, from the temporal variations of breath deuterium following the ingestion of a known quantity of D(2)O, we show that total body water can be determined non-invasively and the kinetics of water flow around the body can be tracked.

Selected ion flow tube mass spectrometry analyses of stable isotopes in water: isotopic composition of H3O+ and H3O+ (H2O)3 ions in exchange reactions with water vapor

A new method has been developed for the determination of the isotope abundance ratios of deuterium, D, and oxygen-18, 18O, in water vapor (and water) using selected ion flow tube mass spectrometry (SIFT-MS). H3O+ ions are injected into the helium carrier gas where they associate with the H2O and HDO molecules in a sample of water introduced into the carrier gas. The D and 18O contents of the product cluster ions H8DO4+ and H9(18)OO3+ at m/e = 74 and 75, respectively, are determined by reference to the majority cluster ion H9O4+ at m/e = 73. Allowance is made for the contribution of the H8(17)OO3+ ions to the m/z = 74 ions. Absolute isotopic ratios are measured within seconds without the need for precalibration of the SIFT-MS instrument, currently to an accuracy of better than 2%.

An investigation of the reactions of H3O+ and O2+ with NO, NO2, N2O and HNO2 in support of selected ion flow tube mass spectrometry

A selected ion flow tube (SIFT) experimental investigation has been carried out of the reactions of H3O+, NO+ and O2+ with NO, NO2, N2O and HNO2, in order to obtain the essential kinetic data for the analyses of these compounds in air using selected ion flow tube mass spectrometry (SIFT-MS). These investigations show that NO+ ions do not react at a significant rate with any of these NOx compounds and that H3O+ ions react only with HNO2 (product ions H2NO2+ (75%) and NO+ (25%)). O2+ ions react with NO (product ion NO+), NO2 (product ion NO2+) and HNO2 (product ions NO+ (75%), NO2+ (25%)), but not with N2O. We conclude that both NO and NO2 can be accurately quantified in air using only O2+ precursor ions and SIFT-MS when HNO2 is not present. However, when HNO2 is present it invariably co-exists with both NO and NO2 and then both H3O+ and O2+ precursor ions are needed to determine the partial pressures of NO, NO2 and HNO2 in the air mixture. We also conclude that currently N2O cannot be analysed in air using SIFT-MS.

Quantification of hydrogen sulphide in humid air by selected ion flow tube mass spectrometry

We report the results of a study of the reactions of H(3)O(+), NO(+) and O(2)(+.) ions with H(2)S. This study was undertaken to provide a thorough understanding of the ion chemistry required for accurate quantification of H(2)S in humid air by selected ion flow tube mass spectrometry (SIFT-MS). It shows that slow reactions occur between H(3)S(+), the primary product ions of the H(3)O(+)/H(2)S reaction, and the abundant H(2)O molecules present in humid air and breath. These reactions disturb somewhat the quantification of H(2)S by this analytical method, but the kinetic data obtained in this study facilitate precise quantification of H(2)S in humid air. This study also shows that NO(+) does not react with H(2)S, and that O(2)(+.) does react rapidly with H(2)S, but the product H(2)S(+.) ions react rapidly with H(2)O. Thus, NO(+) and O(2)(+.) cannot be used as precursor ion for analysis of H(2)S in moist air by SIFT-MS. A sample SIFT mass spectrum is shown from which H(2)S and several other volatile compounds have been quantified in a sample of cow rumen gas.

Trace gases in breath of healthy volunteers when fasting and after a protein-calorie meal: a preliminary study

The selected ion flow tube technique was used to quantify in breath the trace gases acetone, ammonia, ethanol, isoprene, and methanol during single exhalations while fasting and in response to feeding. Six normal volunteers were fasted for 12 h, and, after baseline breath samples were obtained, were fed a liquid protein-calorie meal to provide 0.47 g/kg of protein (Fortisip). Further breath samples were obtained at 20, 40, and 60 min, and then hourly for a further 5 h. Breath acetone concentrations fell from a maximum during fasting, reaching their nadir between 4 and 5 h. Breath ammonia concentrations fell immediately to one-half their fasting levels before a steady increase to two or three times baseline values at 5 h. There was a brief increase in breath ethanol concentrations after feeding, reflecting detectable ethanol contamination of the food. Subsequently, breath ethanol levels remained low throughout the experimental protocol. Isoprene concentrations did not change significantly, whereas changes in methanol concentrations reflected those in the ambient air. This preliminary study indicates that the selected ion flow tube technique may be used to detect changes in the trace gases present in breath and define their concentrations in the fasting and replete state. Of particular interest is the biphasic response of the breath ammonia concentration after feeding.

Quantification of breath isoprene using the selected ion flow tube mass spectrometric analytical method

We have used our selected ion flow tube mass spectrometric method (SIFT-MS) to study isoprene levels in the alveolar breath of 29 healthy volunteers during normal working hours at the varying states of nutrition occurring during this period. Quantification of the breath isoprene was achieved using O(2)(+) precursor ions to avoid complications which can arise when using H(3)O(+) precursor ions for isoprene analysis. The present data indicate that the spread of the alveolar isoprene levels in this sample of healthy individuals is 22 to 234 ppb and that the mean value is 83 ppb with a standard deviation of 45 ppb. These levels are compared with those previously determined using other techniques and are seen to be at the low end of the values previously reported. The present studies are a prelude to an investigation of the proposed correlation of breath isoprene levels with psychological, physical and biochemical stress.

Analysis of formaldehyde in the headspace of urine from bladder and prostate cancer patients using selected ion flow tube mass spectrometry

We have used selected ion flow tube mass spectrometry (SIFT-MS) to determine the concentration of formaldehyde in the headspace of urine from patients suffering from bladder and prostate cancer and from several healthy subjects as controls. We address the potential problems associated with the use of ion chemistry to quantify formaldehyde in the presence of the relatively large number densities of water molecules and show that formaldehyde can be quantified in urine headspace using analysis by SIFT-MS. These studies show that formaldehyde is clearly elevated in the headspace of the urine from the cancer patients as compared with urine from the healthy controls. Thus, with further improvements in the methodology and the sensitivity of our SIFT-MS technique, formaldehyde quantification in urine headspace using this new analytical method could be a valuable non-invasive indicator of the presence of early-stage tumours in the body.

The novel selected-ion flow tube approach to trace gas analysis of air and breath

We present an overview of the development and use of our selected-ion flow tube (SIFT) technique as a sensitive, quantitative method for the rapid, real-time analysis of the trace gas content of atmospheric air and human breath, presenting some pilot data from various research areas in which this method will find valuable application. We show that it is capable of detecting and quantifying trace gases, in complex mixtures such as breath, which are present at partial pressures down to about 10 parts per billion. Following discussions of the principles involved in this SIFT method of analysis, of the experiments which we have carried out to establish its quantitative validity, and of the air and breath sampling techniques involved, we present sample data on the detection and quantification of trace gases on the breath of healthy people and of patients suffering from renal failure and diabetes. We also show how breath ammonia can be accurately quantified from a single breath exhalation and used as an indicator of the presence in the stomach of the bacterium Helicobacter pylori. Health and safety applications are exemplified by analyses of the gases of the gases of cigarette smoke and on the breath of smokers. The value of this analytical method in environmental science is demonstrated by the analyses of petrol vapour, car exhaust emissions and the trace organic vapours detected in town air near a busy road. Final examples of the value of this analytical method are the detection and quantification of the gases emitted from crushed garlic and from breath following the chewing of a mint, which demonstrate its potential in food and flavour research. Throughout the paper we stress the advantages of this SIFT method compared to conventional mass spectrometry for trace gas analysis of complex mixtures, emphasizing its selectivity, sensitivity and real-time analysis capability. Finally, we note that whilst the current SIFT is strictly laboratory based, both transportable and portable instruments are under construction and development. These instruments will surely extend the application of this analytical technique into more areas and allow greater exploitation of their on-line and real-time features.