Accelerated Removal of Fe-Antisite Defects while Nanosizing Hydrothermal LiFePO4 with Ca(2)

Based on neutron powder diffraction (NPD) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), we show that calcium ions help eliminate the Fe-antisite defects by controlling the nucleation and evolution of the LiFePO4 particles during their hydrothermal synthesis. This Ca-regulated formation of LiFePO4 particles has an overwhelming impact on the removal of their iron antisite defects during the subsequent carbon-coating step since (i) almost all the Fe-antisite defects aggregate at the surface of the LiFePO4 crystal when the crystals are small enough and (ii) the concomitant increase of the surface area, which further exposes the Fe-antisite defects. Our results not only justify a low-cost, efficient and reliable hydrothermal synthesis method for LiFePO4 but also provide a promising alternative viewpoint on the mechanism controlling the nanosizing of LiFePO4, which leads to improved electrochemical performances.

Direct imaging of boron segregation at dislocations in B:diamond heteroepitaxial films

A thin film of heavily B-doped diamond has been grown epitaxially by microwave plasma chemical vapor deposition on an undoped diamond layer, on top of a Ir/YSZ/Si(001) substrate stack, to study the boron segregation and boron environment at the dislocations present in the film. The density and nature of the dislocations were investigated by conventional and weak-beam dark-field transmission electron microscopy techniques, revealing the presence of two types of dislocations: edge and mixed-type 45° dislocations. The presence and distribution of B in the sample was studied using annular dark-field scanning transmission electron microscopy and spatially resolved electron energy-loss spectroscopy. Using these techniques, a segregation of B at the dislocations in the film is evidenced, which is shown to be intermittent along the dislocation. A single edge-type dislocation was selected to study the distribution of the boron surrounding the dislocation core. By imaging this defect at atomic resolution, the boron is revealed to segregate towards the tensile strain field surrounding the edge-type dislocations. An investigation of the fine structure of the B-K edge at the dislocation core shows that the boron is partially substitutionally incorporated into the diamond lattice and partially present in a lower coordination (sp(2)-like hybridization).

Nanoscale mapping of plasmon and exciton in ZnO tetrapods coupled with Au nanoparticles

Metallic nanoparticles can be used to enhance optical absorption or emission in semiconductors, thanks to a strong interaction of collective excitations of free charges (plasmons) with electromagnetic fields. Herein we present direct imaging at the nanoscale of plasmon-exciton coupling in Au/ZnO nanostructures by combining scanning transmission electron energy loss and cathodoluminescence spectroscopy and mapping. The Au nanoparticles (~30 nm in diameter) are grown in-situ on ZnO nanotetrapods by means of a photochemical process without the need of binding agents or capping molecules, resulting in clean interfaces. Interestingly, the Au plasmon resonance is localized at the Au/vacuum interface, rather than presenting an isotropic distribution around the nanoparticle. On the contrary, a localization of the ZnO signal has been observed inside the Au nanoparticle, as also confirmed by numerical simulations.

The role of hydrogen during Pt–Ga nanocatalyst formation

The behavior and role of hydrogen is investigated by using Pt–Ga nano-alloy formation as a probe reaction.

Anatase TiO2 nanoparticle coating on porous COK-12 platelets as highly active and reusable photocatalysts

Coating of anatase TiO₂ nanoparticles on ordered mesoporous silica COK-12 platelets for effective photodegradation of various organic pollutants under UV light irradiation.

One-pot synthesis of Pt catalysts based on layered double hydroxides: an application in propane dehydrogenation

One-pot synthesis of Mg,Al,Pt,In–layered double hydroxides (LDHs) yields well-dispersed Pt–In NPs. These nanocatalysts display high propane dehydrogenation activity and display the potential for deriving a broad class of Pt catalysts from LDHs.

Engaging Future Clinical Oncology Researchers: An Initiative to Integrate Teaching of Biostatistics and Research Methodology into Specialty Training

AIMS

To evaluate the learner's perspectives on a novel workshop programme designed to improve skills in biostatistics, research methodology and critical appraisal in oncology.

MATERIALS AND METHODS

Trainees were surveyed anonymously at the completion of each annual workshop from 2012 to 2015. In total, 103 trainees in years 2-4 of training in radiation oncology responded, giving a 94% survey response rate. A 1 day workshop, designed by biostatisticians and radiation oncologist facilitators, is the central component of a programme teaching skills in biostatistics, research methods and critical appraisal. This links short didactic lectures about statistical concepts to interactive trainee discussions around discipline-related publications.

RESULTS

The workshop was run in conjunction with the major radiation oncology clinical trials group meeting with alternating programmes (A and B). Most of the participants (44-47/47 for A and 48-55/56 for B), reported that their understanding of one or more individual topics improved as a result of teaching. Refinement of the workshop over time led to a more favourable perception of the 'optimal' balance between didactic/interactive teaching: nine of 27 (33%) 'optimal' responses seen in 2013 compared with 23 of 29 (79%) in 2015 (P < 0.001). Commonly reported themes were: clinician facilitators and access to biostatisticians helped contextualise learning and small group, structured discussions provided an environment conducive to learning.

CONCLUSIONS

Overall, radiation oncology trainees reported positive perceptions of the educational value of this programme, with feedback identifying areas where this resource might be improved. This model could readily be adapted to suit other medical disciplines and/or other training environments, using specialty-specific research to illuminate key statistical concepts.

Radiographic, computed tomographic and surgical anatomy of the equine sphenopalatine sinus in normal and diseased horses

REASONS FOR PERFORMING STUDY

Knowledge of imaging anatomy, surgical anatomy and disorders affecting the sphenopalatine sinus are currently lacking.

OBJECTIVES

To describe the computed tomographic (CT) and surgical anatomy of the sphenopalatine sinus and diagnosis, treatment and outcome in clinical cases with sphenopalatine sinus disease.

STUDY DESIGN

Cadaver observational study and retrospective case series.

METHODS

The sphenopalatine sinuses of 10 normal cadaver heads were examined with digital radiography, CT and sinoscopic examination prior to anatomical sectioning. Sphenopalatine sinus anatomy was described and compared between cadaver specimens across the imaging modalities. Medical records (January 2004-2014) of cases diagnosed with sphenopalatine sinus disease were reviewed.

RESULTS

The anatomy of the sphenopalatine sinus was variable. The borders of the sphenopalatine sinus were not identifiable on plain radiographs, whereas CT provided useful anatomical information. The palatine portion of the sphenopalatine sinus was consistently accessible sinoscopically and the sphenoidal portion was accessible in 6/10 cadaver heads. Fourteen cases of sphenopalatine sinus disease were identified, presenting with one or more clinical signs of exophthalmos, blindness, unilateral epistaxis or unilateral nasal discharge. Diagnoses included neoplasia (7), progressive ethmoidal haematoma (4), sinus cyst (2) and empyema (1). Computed tomography provided diagnostic information but could not differentiate the nature of soft tissue masses. Standing sinoscopic access to the palatine portion of the sphenopalatine sinus was possible for evaluation, biopsy and resection of abnormal soft tissues. Surgical access to the sphenoidal portion was limited. Eight horses were alive at 1 year after diagnosis, with a worse outcome associated with CT evidence of bone loss and a diagnosis of neoplasia.

CONCLUSIONS

Sphenopalatine sinus disease should be considered a rare cause of the clinical signs described. Knowledge of the anatomical variation of the sphenopalatine sinus is vital for interpreting CT images. A combination of CT and sinoscopy provides the most comprehensive approach for diagnosis and treatment of sphenopalatine sinus disease.

Damage evaluation in graphene underlying atomic layer deposition dielectrics

Based on micro-Raman spectroscopy (μRS) and X-ray photoelectron spectroscopy (XPS), we study the structural damage incurred in monolayer (1L) and few-layer (FL) graphene subjected to atomic-layer deposition of HfO₂ and Al₂O₃ upon different oxygen plasma power levels. We evaluate the damage level and the influence of the HfO₂ thickness on graphene. The results indicate that in the case of Al₂O₃/graphene, whether 1L or FL graphene is strongly damaged under our process conditions. For the case of HfO₂/graphene, μRS analysis clearly shows that FL graphene is less disordered than 1L graphene. In addition, the damage levels in FL graphene decrease with the number of layers. Moreover, the FL graphene damage is inversely proportional to the thickness of HfO₂ film. Particularly, the bottom layer of twisted bilayer (t-2L) has the salient features of 1L graphene. Therefore, FL graphene allows for controlling/limiting the degree of defect during the PE-ALD HfO₂ of dielectrics and could be a good starting material for building field effect transistors, sensors, touch screens and solar cells. Besides, the formation of Hf-C bonds may favor growing high-quality and uniform-coverage dielectric. HfO₂ could be a suitable high-K gate dielectric with a scaling capability down to sub-5-nm for graphene-based transistors.

Enhanced early sensory outcome after nerve repair as a result of immediate post-operative re-learning: a randomized controlled trial

We assessed the use of guided plasticity training to improve the outcome in the first 6 months after nerve repair. In a multicentre randomized controlled trial, 37 adults with median or ulnar nerve repair at the distal forearm were randomized to intervention, starting the first week after surgery with sensory and motor re-learning using mirror visual feedback and observation of touch, or to a control group with re-learning starting when reinnervation could be detected. The primary outcome at 3 and 6 months post-operatively was discriminative touch (shape texture identification test, part of the Rosen score). At 6 months, discriminative touch was significantly better in the early intervention group. Improvement of discriminative touch between 3 and 6 months was also significantly greater in that group. There were no significant differences in motor function, pain or in the total score. We conclude that early re-learning using guided plasticity may have a potential to improve the outcomes after nerve repair. LEVEL OF EVIDENCE II.

Direct access in the UK: what do dentists really think?

OBJECTIVE

To investigate dentists' views on the likely impact of direct access (DA), the clinical competence of hygienists and therapists to work autonomously and possible predictors of such views.

DESIGN

Random survey of registered dentists.

SETTING

UK, 2014.

SUBJECTS AND METHODS

A random sample of UK-based dentists registered with the General Dental Council (GDC). A unique-access online questionnaire was developed, with a paper alternative. Email and postal reminders were sent.

MAIN OUTCOME MEASURES

Measures of positive/negative views regarding the impact of DA and clinical competence of hygienists and therapists to work without a dentist's prescription.

RESULTS

One hundred and fifty-nine responded (response rate: 27%), 78 (49.1%) of whom were female. No significant sources of response bias were identified. While 122 (77%) had not undergone joint training with dental hygienists or therapists at the undergraduate level, 98 (62.4%) currently worked with a hygienist and 33 (21.0%) with a therapist. Eighty-three (53.2%) disagreed with the GDC decision regarding DA for hygienists, and 94 (59.1%) felt the same regarding therapists. Concern was greatest in respect to diagnosis, treatment planning and restorations. Comments were predominantly negative and reflected concerns over patient safety, what was seen as hygienists' and therapists' inadequate training or expertise, the undermining of the dentist's role, service delivery, the reform being poorly planned, implemented or being a cost-cutting exercise. Experience of teamwork was not predictive of positive/negative views.

CONCLUSIONS

Response was low, thus posing a potential threat to the study's representativeness. Many dentists had concerns and reservations about DA which were unrelated to teamwork experience. The dissemination of information on curricula and scope of practice may help allay such concerns, as may a greater emphasis on joint training at both the undergraduate level and within continuing professional development programmes.

The impact of national-level interventions to improve hygiene on the incidence of irritant contact dermatitis in healthcare workers: changes in incidence from 1996 to 2012 and interrupted times series analysis

BACKGROUND

Reducing healthcare-associated infections (HCAI) has been a priority in the U.K. over recent decades and this has been reflected in interventions focusing on improving hygiene procedures.

OBJECTIVES

To evaluate whether these interventions coincided with an increased incidence of work-related irritant contact dermatitis (ICD) attributed to hand hygiene or/and other hygiene measures in healthcare workers (HCWs).

METHODS

A quasi-experimental (interrupted time series) design was used to compare trends in incidence of ICD in HCWs attributed to hygiene before and after interventions to reduce HCAI with trends in the same periods in control groups (ICD in other workers). Cases of ICD reported to a U.K. surveillance scheme from 1996 to 2012 were analysed. The time periods compared were defined objectively based on the dates of the publication of national evidence-based guidelines, the U.K. Health Act 2006 and the Cleanyourhands campaign.

RESULTS

The reported incidence of ICD in HCWs attributed to hygiene has increased steadily from 1996 to 2012 [annual incidence rate ratio (95% confidence interval): hand hygiene only 1.10 (1.07-1.12); all hygiene 1.05 (1.03-1.07)], whereas the incidence in other workers is declining. An increase in incidence of ICD in HCWs attributed to hand hygiene was observed at the beginning of the Cleanyourhands campaign.

CONCLUSIONS

The increasing incidence of ICD in HCWs combined with the popularity of interventions to reduce HCAI warrants increased efforts towards identifying products and implementing practices posing the least risk of ICD.

Selective nickel-catalyzed conversion of model and lignin-derived phenolic compounds to cyclohexanone-based polymer building blocks

Valorization of lignin is essential for the economics of future lignocellulosic biorefineries. Lignin is converted into novel polymer building blocks through four steps: catalytic hydroprocessing of softwood to form 4-alkylguaiacols, their conversion into 4-alkylcyclohexanols, followed by dehydrogenation to form cyclohexanones, and Baeyer-Villiger oxidation to give caprolactones. The formation of alkylated cyclohexanols is one of the most difficult steps in the series. A liquid-phase process in the presence of nickel on CeO2 or ZrO2 catalysts is demonstrated herein to give the highest cyclohexanol yields. The catalytic reaction with 4-alkylguaiacols follows two parallel pathways with comparable rates: 1) ring hydrogenation with the formation of the corresponding alkylated 2-methoxycyclohexanol, and 2) demethoxylation to form 4-alkylphenol. Although subsequent phenol to cyclohexanol conversion is fast, the rate is limited for the removal of the methoxy group from 2-methoxycyclohexanol. Overall, this last reaction is the rate-limiting step and requires a sufficient temperature (>250 °C) to overcome the energy barrier. Substrate reactivity (with respect to the type of alkyl chain) and details of the catalyst properties (nickel loading and nickel particle size) on the reaction rates are reported in detail for the Ni/CeO2 catalyst. The best Ni/CeO2 catalyst reaches 4-alkylcyclohexanol yields over 80 %, is even able to convert real softwood-derived guaiacol mixtures and can be reused in subsequent experiments. A proof of principle of the projected cascade conversion of lignocellulose feedstock entirely into caprolactone is demonstrated by using Cu/ZrO2 for the dehydrogenation step to produce the resultant cyclohexanones (≈80 %) and tin-containing beta zeolite to form 4-alkyl-ε-caprolactones in high yields, according to a Baeyer-Villiger-type oxidation with H2 O2 .

Vapor Phase Processing of α-Fe₂O₃ Photoelectrodes for Water Splitting: An Insight into the Structure/Property Interplay

Harvesting radiant energy to trigger water photoelectrolysis and produce clean hydrogen is receiving increasing attention in the search of alternative energy resources. In this regard, hematite (α-Fe2O3) nanostructures with controlled nano-organization have been fabricated and investigated for use as anodes in photoelectrochemical (PEC) cells. The target systems have been grown on conductive substrates by plasma enhanced-chemical vapor deposition (PE-CVD) and subjected to eventual ex situ annealing in air to further tailor their structure and properties. A detailed multitechnique approach has enabled to elucidate the interrelations between system characteristics and the generated photocurrent. The present α-Fe2O3 systems are characterized by a high purity and hierarchical morphologies consisting of nanopyramids/organized dendrites, offering a high contact area with the electrolyte. PEC data reveal a dramatic response enhancement upon thermal treatment, related to a more efficient electron transfer. The reasons underlying such a phenomenon are elucidated and discussed by transient absorption spectroscopy (TAS) studies of photogenerated charge carrier kinetics, investigated on different time scales for the first time on PE-CVD Fe2O3 nanostructures.

Workplace injury data reported by occupational physicians and general practitioners

BACKGROUND

Accurate workplace injury data are useful in the prioritization of prevention strategies. In the UK, physicians report workplace ill-health data within The Health and Occupation Research (THOR) network, including injury case reports.

AIMS

To compare workplace injury data reported by occupational physicians (OPs) and general practitioners (GPs) to THOR.

METHODS

Injury cases reported by OPs and GPs, reported to THOR between 2006 and 2012 were analysed. Demographics, industrial groups, nature of injury, kind of accident and site of injury were compared. Data on sickness absence for workplace injuries reported by GPs were investigated.

RESULTS

In total, 2017 workplace injury cases were reported by OPs and GPs. Males were more likely to sustain a workplace accident than females. Sprains and strains were reported most often, with the upper limbs being affected most frequently. Slips, trips and falls were identified as important causal factors by both OPs and GPs. Psychological injuries also featured in THOR reporting, with a higher proportion reported by OPs (21%) than by GPs (3%). The proportion of people classified as 'unfit' by GPs reduced following the introduction of the 'fit' note.

CONCLUSIONS

THOR reports returned by OPs and GPs provide a valuable source of information of workplace injury data, and complement other sources of information, such as the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations and the Labour Force Survey.

Local environment of Fe dopants in nanoscale Fe : CeO(2-x) oxygen storage material

Nanoscale Fe : CeO2-x oxygen storage material for the process of chemical looping has been investigated by advanced transmission electron microscopy and electron energy-loss spectroscopy before and after a model looping procedure, consisting of redox cycles at heightened temperature. Separately, the activity of the nanomaterial has been tested in a toluene total oxidation reaction. The results show that the material consists of ceria nanoparticles, doped with single Fe atoms and small FeOx clusters. The iron ion is partially present as Fe(3+) in a solid solution within the ceria lattice. Furthermore, enrichment of reduced Fe(2+) species is observed in nanovoids present in the ceria nanoparticles, as well as at the ceria surface. After chemical looping, agglomeration occurs and reduced nanoclusters appear at ceria grain boundaries formed by sintering. These clusters originate from surface Fe(2+) aggregation, and from bulk Fe(3+), which "leaks out" in reduced state after cycling to a slightly more agglomerated form. The activity of Fe : CeO2 during the toluene total oxidation part of the chemical looping cycle is ensured by the dopant Fe in the Fe1-xCexO2 solid solution, and by surface Fe species. These measurements on a model Fe : CeO2-x oxygen storage material give a unique insight into the behavior of dopants within a nanosized ceria host, and allow to interpret a plethora of (doped) cerium oxide-based reactions.

Cases of occupational dermatitis and asthma in beauticians that were reported to The Health and Occupation Research (THOR) network from 1996 to 2011

BACKGROUND

Beauticians are exposed to many potential allergens in their occupation.

AIM

To identify the sources of occupational skin and respiratory disease reported in beauticians, with an emphasis on acrylate chemicals, and to investigate the trends over time.

METHODS

We used the Health and Occupation Research (THOR) database to identify occupational disease in beauticians between 1996 and 2011. Trend analysis was carried out to look for any change in the allergens reported over this period.

RESULTS

In total, 257 cases of contact dermatitis (CD) in beauticians were identified, which were associated with 502 suspected agents. The most frequently cited source of allergic CD was acrylate chemicals. The trend analysis showed a small average annual percentage increase in work-related CD in beauticians for all agents (1.1%; 95% CI -2.5 to 4.9). There was a small decrease in cases in which acrylates were not cited (-1.7%; 95% CI -5.9 to 2.7), and a statistically significant increase when acrylates were cited (7.4%; 95% CI 0.9 to 14.4). There were 11 cases of occupational asthma.

CONCLUSION

We found an increase in cases of occupational dermatitis associated with acrylates in beauticians over a 15-year period, and describe other causes of occupational dermatitis.

Au@UiO-66: a base free oxidation catalyst

We present the in situ synthesis of Au nanoparticles within the Zr based Metal Organic Framework, UiO-66.

Refugee blues: a UK and European perspective

In this paper, the numbers of refugees travelling to the European Union are set in a global context. It is argued that the increasing restrictions placed on asylum seekers from the 1980s onwards in the UK and the associated culture of deterrence and prohibition have had the perverse effect of supporting the economic market for people smuggling. It appears that these restrictions were initially designed to deter people, most of whom would have been granted humanitarian assistance had they managed to arrive in the UK, so as to prevent them from accessing the decision-making process on asylum. Policy changes concerning travel, benefits, and other pressures on asylum seekers are also considered in the context of deterrence. The problems facing asylum seekers do not end with their arrival in a safe country. The current methods of determining refugee status are alarmingly weak. Indeed there is evidence suggesting that those who are most traumatised before arrival face systematic disadvantage. The focus of this paper is on the United Kingdom but its conclusions apply to most Western European countries. The paper concludes with some tentative suggestions for change.

Correction: Au@UiO-66: a base free oxidation catalyst

Correction for ‘Au@UiO-66: a base free oxidation catalyst’ by K. Leus et al., RSC Adv., 2015, 5, 22334–22342.

Untested assumptions: psychological research and credibility assessment in legal decision-making

BACKGROUND

Trauma survivors often have to negotiate legal systems such as refugee status determination or the criminal justice system.

METHODS & RESULTS

We outline and discuss the contribution which research on trauma and related psychological processes can make to two particular areas of law where complex and difficult legal decisions must be made: in claims for refugee and humanitarian protection, and in reporting and prosecuting sexual assault in the criminal justice system.

CONCLUSION

There is a breadth of psychological knowledge that, if correctly applied, would limit the inappropriate reliance on assumptions and myth in legal decision-making in these settings. Specific recommendations are made for further study.

Investigating work-related neoplasia associated with solar radiation

BACKGROUND

Both solar and non-solar exposures associated with occupation and work tasks have been reported as skin carcinogens. In the UK, there are well-established surveillance schemes providing relevant information, including when exposures took place, occupation, location of work and dates of symptom onset and diagnosis.

AIMS

To add to the evidence on work-related skin neoplasia, including causal agents, geographical exposure and time lag between exposure and diagnosis.

METHODS

This study investigated incident case reports of occupational skin disease originating from clinical specialists in dermatology reporting to a UK-wide surveillance scheme (EPIDERM) by analysing case reports of skin neoplasia from 1996 to 2012 in terms of diagnosis, employment, suspected causal agent and symptom onset.

RESULTS

The suspected causal agent was 'sun/sunlight/ultraviolet light' in 99% of the reported work-related skin neoplasia cases. Most cases reported (91%) were in males, and the majority (62%) were aged over 65 at the time of reporting. More detailed information on exposure was available for 42% of the cases, with the median time from exposure to symptom onset ranging from 44 (melanoma) to 57 (squamous cell carcinoma) years. Irrespective of diagnostic category, the median duration of exposure to 'sun/sunlight/ultraviolet light' appeared longer where exposures occurred in the UK (range 39-51 years) rather than outside the UK (range 2.5-6.5 years).

CONCLUSIONS

It is important to provide effective information about skin protection to workers exposed to solar radiation, especially to outdoor workers based outside the UK.

Three-dimensional valency mapping in ceria nanocrystals

Using electron tomography combined with electron energy loss spectroscopy (EELS), we are able to map the valency of the Ce ions in CeO2-x nanocrystals in three dimensions. Our results show a clear facet-dependent reduction shell at the surface of ceria nanoparticles; {111} surface facets show a low surface reduction, whereas at {001} surface facets, the cerium ions are more likely to be reduced over a larger surface shell. Our generic tomographic technique allows a full 3D data cube to be reconstructed, containing an EELS spectrum in each voxel. This possibility enables a three-dimensional investigation of a plethora of material-specific physical properties such as valency, chemical composition, oxygen coordination, or bond lengths, triggering the synthesis of nanomaterials with improved properties.

Work-related ill-health: Republic of Ireland, Northern Ireland, Great Britain 2005-2012

BACKGROUND

Data on work-related ill-health (WRIH) in the Republic of Ireland is inconsistent.

AIMS

To compare the incidence of WRIH in the Republic of Ireland (ROI), Northern Ireland (NI) and Great Britain (GB) reported by clinical specialists in skin and respiratory medicine and by specialist occupational physicians (OPs).

METHODS

Analysis of data reported to three surveillance schemes in The Health and Occupation Research (THOR) network in ROI and corresponding UK schemes.

RESULTS

Contact dermatitis was the most frequently reported skin disease in the three areas. Asthma was the most frequently-reported respiratory disease in the ROI, while asbestos-related cases predominate in GB and NI. Mental health disorders, followed by musculoskeletal disorders were reported most frequently by OPs. Annual average incidence rates for skin disease were 2 per 100000 employed (95% confidence interval [CI] 1.9-2.8) in the ROI and 7 per 100000 for GB (95% CI 4.8-9.4). Unadjusted incidence rates for respiratory disease were 1 (95% CI 0.3-1) and 8 (95% CI 6.1-10.7) per 100000 in the ROI and GB, respectively; adjusted for reporter non-response, these figures increased to 15 (95% CI 11.3-19.6) and 32 (95% CI 28.4-35.6) per 100000 respectively.

CONCLUSIONS

This is the first paper to include THOR data on WRIH from the ROI, NI and GB. Consistent and dedicated data collection in the ROI via the THOR schemes is viable and important in the light of a deficit of occupational ill-health data. Sustained efforts to improve participation are underway.

On the origin of damped electrochemical oscillations at silicon anodes (revisited)

Electrochemical oscillations accompanying the formation of anodic silica have been shown in the past to be correlated with rather abrupt changes in the mechanical stress state of the silica film, commonly associated with some kind of fracture or porosification of the oxide. To advance the understanding on the origin of such oscillations in fluoride-free electrolytes, we have revisited a seminal experiment reported by Lehmann almost two decades ago. We thereby demonstrate that the oscillations are not stress-induced, and do not originate from a morphological transformation of the oxide in the course of anodisation. Alternatively, the mechanical features accompanying the oscillations can be explained by a partial relaxation of the field-induced electrostrictive stress. Furthermore, our observations suggest that the oscillation mechanism more likely results from a periodic depolarisation of the anodic silica.